Our Company. Golden Compound is an autonomus part of the SPC Sunflower Plastic Compound GmbH
|
|
- Mary Powers
- 6 years ago
- Views:
Transcription
1
2 Agenda Our company Our proposition Sunflower seed production Sunflower hull preparation Production Features of S²PC Benefits of S²PC Application areas for S²PC Case studies About our Eco-profile
3 Our Company Golden Compound is an autonomus part of the SPC Sunflower Plastic Compound GmbH
4 Our Proposition
5 Sunflower Hull Preparation Control residual Fat & Water content in hull preparation Hulls are grinded to specific dimensions Optimised compounds for specific applications Hulls Coarse grinded hulls Sunflower fibers
6 Production Vision Pilot plant MT per year Large scale plant MT per year Global Expansion
7 Features of S²PC S²PC is compounded performance material Specially prepared Sunflower Hulls Polymer matrix Engineering additives Features Natural dark/black color - lighter colours possible Unique aesthetics Natural foaming effect Shift in balance of performance data vs. incumbent fillers and fibers Reduced density vs. incumbent fillers and fibers Easy processable at conventional conversion equipment Substantiated sustainability claims
8 Benefits of S²PC Compared with UNFILLED materials Reduced cycle times up to 50% Reduced melt temperature up to 25 % Increased Strength and Stiffness Increased Heat Deformation Temperature No sink marks with thick parts Compared with FILLED materials Reduced density of 10% Increased flexibility at equal loading Compared with other NATURAL fibers & fillers High flow properties Excellent processability
9 Product Portfolio
10 Product Portfolio
11 Product Portfolio Norm Units S²PC 3545 S²PC 5045 S²PC LP 41 S²PC LP 41 S²PC LH 41 S²PC 3056 GF 20 S²PC 3056 GF LP 41 Density ISO 1183 g/cm³ 1,02 1,04 1,02 1,02 1,02 1,17 1,17 MVR ISO 1133 (190 C/5 kg) cm³/10 min E-modulus ISO 527 MPa Tensile Strenght ISO 527 MPa Elongation at Break ISO 527 % 4,7 3, ,3 12 2,9 3,2 Flex Modulus ISO 178 MPa Flex Strenght ISO 178 MPa Elongation at Strain ISO 178 % 5,3 3,7 Charpy Impact Resistance 23 C ISO 179/1eU kj/m² 14,3 12,3 27,3 25, ,4 23,3 Charpy Impact Resistance, notched 23 C ISO 179/1eA kj/m² 2,3 2,4 4,2 6,7 9,4 4,6 6,9 Charpy Impact Resistance, notched -20 C ISO 179/1eA kj/m² 2,3 Vicat Softening Point /B ISO 306 C HDT /A ISO 75-1 (1,8 MPa) C 72 HDT / B ISO 75-1 (0,45 MPa) C Mould shrinkage - Parallel to flow ISO % 1,0 1,0 0,6 Mould shrinkage - Orthogonal to flow ISO % 1,0 1,0 0,8
12 Application areas for S²PC Inherent properties drive certain markets Furniture Transport and Storage solutions Gardening Products Technical Components
13 Application areas for S²PC Focus on Furniture
14 Case Study: Office Chair component Seat back of office chair About 1.3 kg and 70 cm x 50 cm Cycletime incumbent material PP: 120 s Cycletime with S²PC 70 s Other Benefits No sink marks Easier attachement of foam
15 Case Study: PA GF 30 material replacement Socket for office cabinets About 75 grams 15 cm height Incumbent material Polyamide 6 GF 30 Our Solution PP S²PC 3545 BO GF 20 Benefits: Raw material 30% cheaper 12% weight reduction Reduced component cost Functional properties of part maintained Lower processing temperatures
16 Case Study: Spacer elements Spacers for Building and Construction Different thicknesses typical 8 cm long Thick wall parts Cycletime incumbent material HDPE: 60 s Cycletime with PP S²PC 3545: 23 s Other Benefits No sink marks Colorable High (compression) strenght
17 Case Study: Cycle time reduction Crates for high-bay warehouse About 1.8 kg and 60 cm x 40 cm x 10 cm Cycletime incumbent material PP: 120 s Cycletime with S²PC 70 s Storage Box About 300 gr and 20cm x 15 cm x 15 cm Cycletime incumbent material PP: 60 s Cycletime with S²PC : 35 s
18 About Eco-profile Excellent Eco-profile anticipated by the German Federal Environmental Agency Preservation fossil raw materials By-product of food production Recyclable High energy recovery possible in end-of-life. 100% certified Green Energy used in manufacturing Supply of raw materials almost entirely by boat Deliver of S²PC with next door transport company and Euro 6 trucks
19 More information can be found on Golden Compound GmbH Tel.: +49 (0) Saerbecker Straße 42 D Ladbergen Geschäftsleitung: Stephan Albers (GF), Reinhard Trumme (Prokurist)
MANUFACTURING RAVAPLEN
MANUFACTURING RAVAPLEN Ravago is introducing RAVAPLEN ECO PP Compounds RAVAPLEN ECO PP Compounds is designed with the best combination of PP base polymers and a wide variety of different advanced stabilizations
More informationCYCOLOY Resin XCY620 Europe-Africa-Middle East: COMMERCIAL
PC+ ABS Automotive applications, High Impact and High Flow, ductility at low temperature, excellent properties retention after Hydrolytic and Heat Aging MECHANICAL Tensile Stress, yld, Type I, 50 mm/min
More informationHOSTAFORM C 9021 GV1/30 POM Glass Reinforced
Description Chemical abbreviation according to ISO 1043-1: POM Molding compound ISO 9988- POM-K, M-GNR, 02-003, GF26 POM copolymer Injection molding type, reinforced with ca 26 % glass fibers; high resistance
More informationHOSTAFORM C 9021 GV1/10 POM Glass Reinforced
Description Chemical abbreviation according to ISO 1043-1: POM Molding compound ISO 9988- POM-K, M-GNR, 02-003, GF10 POM copolymer Injection molding type, reinforced with ca. 10 % glass fibers; high resistance
More informationHOSTAFORM C 9021 GV1/30 POM Glass Reinforced
Description Chemical abbreviation according to ISO 1043-1: POM Molding compound ISO 9988- POM-K, M-GNR, 02-003, GF26 POM copolymer Injection molding type, reinforced with ca 26 % glass fibers; high resistance
More informationHier Ihr Logo. Scona TP Modifiers
Hier Ihr Logo Scona TP Modifiers Nordmann, Nordmann, Rassmann Rassmann GmbH, GmbH, Hamburg Hamburg as asdistribution Partner Partner presents presents 15.01.2002 1 Scona TP Polymer Modifiers of Kometra
More informationVALOX Resin 451E Europe-Africa-Middle East: COMMERCIAL
VALOX 451E is 20% glass reinforced, flame retardant PBT injection moulding resin. MECHANICAL Tensile Stress, yld, Type I, 5 mm/min 110 MPa ASTM D 638 Tensile Stress, brk, Type I, 5 mm/min 110 MPa ASTM
More informationPERSPECTIVES IN PLASTICS
PERSPECTIVES IN PLASTICS Welcome to the world of plastics of PiO Let s achieve things together! Our philosophy WE WOULD LIKE TO BE A RELIABLE PARTNER FOR OUR CUSTOMERS PiO is specialized in delivery and
More informationXenoy* Resin 5720U Americas: COMMERCIAL
Unfilled PBT+PC alloy. Outstanding low temperature impact/chemical resistance. UV stabilized version of XENOY MECHANICAL Tensile Stress, yld, Type I, 50 mm/min 470 kgf/cm² ASTM D 638 Tensile Stress, brk,
More informationDOMO ENGINEERING PLASTICS IN CHEMICALS WE TRUST.
DOMO ENGINEERING PLASTICS IN CHEMICALS WE TRUST. 1 A business unit of DOMO Chemicals THE STRENGTH OF CHEMICALS Private family owned business > Long term vision Back up integrated into the entire Nylon
More informationLexan* Resin 500ECR Americas: COMMERCIAL
Lexan* 500ECR Polycarbonate (PC) resin is a 10% glass fiber filled, injection moldable grade. It is of non-chlorinated & non-brominated flame retardant systems with UL-94 V0 rating at 2.3mm. It is available
More informationAKROMID T (PPA) AKROLOY PA (PA Blend) + PARA
COMPOUNDS FOR METAL REPLACEMENT AKROMID T (PPA) AKROLOY PA (PA Blend) + PARA AKRO-PLASTIC GmbH Member of the Feddersen Group Meeting Your Requirements For decades, polyamides have formed the leading group
More informationTECHNYL A 205F. Key Properties. Description. Benefits. Applications. Product Data Sheet. Regional Availability
TECHNYL A 205F Description TECHNYL A 205F is an unreinforced polyamide 66 for injection moulding. It is available in natural color. Key Properties General purpose Fast cycle High fluidity Benefits The
More informationHOSTAFORM C POM Unfilled
Description Chemical abbreviation according to ISO 1043-1: POM Molding compound ISO 9988- POM-K, M-GNR, 04-002 POM copolymer Easy flowing Injection molding type like C 13021, but with higher strength,
More informationAutomotive Application AUTOMOTIVE APPLICATION
Thermoplastic s compounds are widely used in the automotive industry. The producer has developed polyamide and polypropylene special grades for automotive application with improved mechanical parameters
More informationDuPont Delrin. Delrin 111P NC010. Product Information. acetal resin. plastics.dupont.com
DuPont Delrin acetal resin Delrin 111P NC010 Delrin 111P is a high viscosity acetal homopolymer with improved thermal stability and modifications for more precise moulding (reduced warpage, fewer voids).
More informationProperty Test Condition Unit Standard typical Value -
Makrolon 8325 Glass fiber (Normal fiber) reinforced grades / 20 % Glass fibermvr (300 C/1.2 kg) 4.0 cm³/10 min; 20 % glass fiber reinforced; high viscosity; easy release; injection reinforced molding -
More informationReady to serve the biobased economy
Ready to serve the biobased economy Martin H.B. Snijder 5 th International Congress on Bio-based Plastics and Composites March 14 th 15 st 2012, Maternushaus, Köln What is GreenGran? Production and sales
More informationUltramid Balance Specialty plastics based on PA 610
Balance Balance Specialty plastics based on PA 610 BASF supplies polyamide 610 for processing by injection molding under the trade name Balance which is produced by polycondensation of hexamethylene diamine
More informationVANDAR 2100 PBT Unfilled
Description Vandar 2100 is a polyester alloy designed to offer maximum impact strength at room and low temperatures. This unfilled compound is characterized by outstanding chemical resistance, dimensional
More informationMANUFACTURING. MAFILL glass filled
MANUFACTURING MAFILL glass filled Ravago presents MAFILL one of its pure industrial quality brands Utilizing only portindustrial waste, Mafill PP grades are recycled materials but with highend characteristics.
More informationGardelegen Neuburg a.d.
Gardelegen Neuburg a.d. 1 SUSTAINABILITY, A REAL TREND EU PLASTICS STRATEGY Plastics are an important material class in our economy, and modern daily life is unthinkable without them. At the same time
More informationAKROMID T (PPA) AKROLOY PA (PA Blend) + PARA
COMPOUNDS FOR METAL REPLACEMENT AKROMID T (PPA) AKROLOY PA (PA Blend) + PARA AKRO-PLASTIC GmbH Member of the Feddersen Group Meeting Your Requirements For decades, polyamides have formed the leading group
More informationDuPont Rynite 545 NC010 (Preliminary Data)
PRODUCT INFORMATION DuPont Rynite 545 NC010 (Preliminary Data) Product Information Common features of Rynite thermoplastic polyester include mechanical and physical properties such as excellent balance
More informationThe REMIX project. The technological challenge for mixed plastics recycling
The REMIX project Response to the call for tenders N 154/PP/ENT/PPA/12/6476 Preparatory Action for the Recycling of Mixed Plastics Waste (RECAP) The technological challenge for mixed plastics recycling
More informationPBT AND ITS ADVANTAGES
AND ITS ADVANTAGES Polybutylene terephthalates () are semi-crystalline engineering plastic materials with outstanding properties. The product range covers from high impact with very low stiffness to highly
More informationCELCON M25 POM Unfilled
Description Celcon acetal copolymer grade M25 is a high molecular weight, higher toughness and impact resistance grade primarily used for extrusion and selected injection molding applications. Physical
More informationCELCON M25 POM Unfilled
Description Celcon acetal copolymer grade M25 is a high molecular weight, higher toughness and impact resistance grade primarily used for extrusion and selected injection molding applications. Physical
More informationHOSTAFORM C 9021 POM Unfilled
Description Chemical abbreviation according to ISO 1043-1: POM Molding compound ISO 9988- POM-K, M-GNR, 03-002 POM copolymer Standard-Injection molding type with high rigidity, hardness and toughness;
More informationLexan* Resin EXL9112 Americas: COMMERCIAL
Opaque PC-Siloxane copolymer with excellent processability. Improved flow, low temp. ductility. Non-chlorinated, non-brominated flame retardant product. UL rated V-0/5VA. MECHANICAL Tensile Stress, yld,
More informationLexan* Resin DMX2415 Americas: COMMERCIAL
Lexan* DMX2415 is a polycarbonate resin with improved scratch resistance. Lexan* DMX2415 is available in transparent, translucent, and opaque colors. MECHANICAL Tensile Stress, yld, Type I, 50 mm/min 810
More informationAmodel AS-1133 HS. polyphthalamide. Technical Data Sheet
Technical Data Sheet Amodel AS-1133 HS Amodel AS-1133 HS is a 33% glass reinforced, heat stabilized (PPA) resin that provides excellent structural integrity in molded parts, even those with wall thicknesses
More informationNoryl* Resin GFN1630V Europe-Africa-Middle East: COMMERCIAL
Noryl* GFN1630V Polyphenylene Oxide (PPO) + Polystyrene (PS) resin is a 30 % Glass Reinforced, injection moldable grade with improved hydrolytic stability; this grade has been developed for fluid engineering
More informationHOSTAFORM C POM Unfilled
Description Chemical abbreviation according to ISO 1043-1: POM Molding compound ISO 9988- POM-K, M-GNR, 05-002 POM copolymer Very easy flowing Injection molding type with high rigidity and hardness; good
More informationTooling Block The Green Alternative
Presented by Tim Blackmore Sales Manager - Advanced Engineering Materials Agenda. History Current Practices Trends & Initiatives Materials Potential savings Questions History. Patterns & moulds have been
More informationLexan* Resin 241R Europe-Africa-Middle East: COMMERCIAL
LEXAN 241R is a medium viscosity multi purpose grade and contains a release agent to ensure easy processing. This grade is UL94-V2 at 0.8 mm approved. MECHANICAL Taber Abrasion, CS-17, 1 kg 10 mg/1000cy
More informationAKROMID RM The polyamide with reduced moisture absorption
AKROMID RM The polyamide with reduced moisture absorption AKRO-PLASTIC GmbH Member of the Feddersen Group AKROMID RM-M mechanical series (PA 6) Typical values for black color material at 23 C Test Specification
More informationTECHNYL A 218 V35 BLACK 21N
TECHNICAL DATA SHEET TECHNYL A 218 V35 Black 21N is a polyamide 66, reinforced with 35% of glass fibre, heat stabilized, for injection moulding. This grade offers an excellent combination between thermal
More informationDuPont Zytel 73G15HSL BK363
Product Information PRODUCT INFORMATION Common features of Zytel nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good
More informationValox* Resin 310SE0 Asia Pacific: COMMERCIAL
VALOX 310SE0 is an unreinforced, flame retardant PBT injection moulding resin. Applications: electrical industry, bobbins, keyboard, switches and switch components and appliance housings. MECHANICAL Tensile
More informationHOSTAFORM C POM Unfilled
Description Chemical abbreviation according to ISO 1043-1: POM Molding compound ISO 9988- POM-K, M-GNR, 06-002 POM copolymer Extremly easy flowing Injection molding type for very thin-walled precision
More informationLexan* Resin DMX9455A Europe-Africa-Middle East: COMMERCIAL
Lexan* DMX9455A is a standard flow, flame retardant, transparent polycarbonate copolymer resin with improved scratch resistance. MECHANICAL Tensile Stress, yld, Type I, 50 mm/min 810 kgf/cm² ASTM D 638
More informationDuPont Rynite 530 NC010
PRODUCT INFORMATION Product Information Common features of Rynite thermoplastic polyester include mechanical and physical properties such as excellent balance of strength and stiffness, dimensional stability,
More informationDuPont Hytrel. Hytrel Product Information. thermoplastic polyester elastomer. plastics.dupont.com
DuPont Hytrel thermoplastic polyester elastomer is a high modulus grade with nominal hardness of 72D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing
More informationAKROMID RM The Polyamide with Reduced Moisture Absorption
AKROMID RM The Polyamide with Reduced Moisture Absorption AKRO-PLASTIC GmbH Member of the Feddersen Group Polyamides are materials which have an extremely balanced profile of properties and can therefore
More informationTECHNYL A 218 V30 BLACK 34NG
TECHNICAL DATA SHEET TECHNYL A 218 V30 Black 34 NG is a polyamide 66, reinforced with 30% of glass fiber, heat stabilized, for injection moulding. This grade has been specially designed to improve its
More informationMANUFACTURING. MAFILL glass filled
MANUFACTURING MAFILL glass filled Ravago presents MAFILL one of its pure industrial quality brands MAFILL CR PP Industrial Quality Compounds is designed with best in class postindustrial PP processed base
More informationLGF reinforced compounds Safe under extreme loads
LGF reinforced compounds Safe under extreme loads AKRO-PLASTIC GmbH Member of the Feddersen Group LGF reinforced compounds Typical values for al color material 23 C Test specification Test method Unit
More informationProperty Test Condition Unit Standard typical Value -
Grades / Medical devices MVR (300 C/1.2 kg) 14 cm³/10 min; medical devices; suitable for ETO and steam sterilization at 121 C; biocompatible according to many ISO 10993-1 test requirements; medium viscosity;
More informationNoryl* Resin V0150B Europe-Africa-Middle East: COMMERCIAL
Noryl* V0150B is an unfilled, injection moldable modified polyphenylene ether resin.. Designed for high heat resistance and thin wall FR performance, this resin delivers a UL94 V0 rating at 1.5 mm and
More informationHT 100 HT 200 HTE FOR THE HIGHEST STANDARDS IN METAL REPLACEMENT AT HIGH OPERATING TEMPERATURES.
TEREZ HT 100 HT 200 HTE FOR THE HIGHEST STANDARDS IN METAL REPLACEMENT AT HIGH OPERATING TEMPERATURES www.terplastics.com www.tergroup.com TEREZ HT 100 HT 200 HTE Metal Replacement at High Operating Temperatures
More informationLEXAN Resin LS2 Europe-Africa-Middle East: COMMERCIAL
LEXAN LS2 is a medium viscosity grade especially designed for applications with high optical requirements in terms of clarity and light transmission. MECHANICAL Taber Abrasion, CS-17, 1 kg 10 mg/1000cy
More informationCELANEX PBT Unfilled
Description Celanex 2000-2 is a general purpose, unreinforced polybutylene terephalate with a good balance of mechanical properties and processability. Celanex 2000-2 is a high flow material that contains
More informationHOSTAFORM C 9021 SW POM Tribological
Description Chemical abbreviation according to ISO 1043-1: POM Molding compound ISO 9988- POM-K, M-GNS, 02-002, K10 POM copolymer Injection molding type, special modified with anti-friction additives for
More informationMakrolon. Product range Typical values
Makrolon Product range Typical values Makrolon Makrolon is the brand name of our polycarbonate, which we produce in all the major economic regions of the world. For Makrolon, the most important economic
More informationCycoloy* Resin C2950 Europe-Africa-Middle East: COMMERCIAL
Non-chlorinated and non-brominated flame retardant PC/ABS offering balanced flow and impact plus improved heat resistance intended for various applications. MECHANICAL Taber Abrasion, CS-17, 1 kg 54 mg/1000cy
More informationVECTRA A430 LCP Specialty
Description Provides many of the characteristics of A130 with added lubricity. Suitable for applications requiring excellent wear characteristics. Excellent electrical properties at high frequencies. LCP/PTFE
More informationA3X2G7. Product Information Ultramid 07/2015 PA66-GF35 FR. BASF SE Ludwigshafen, Germany
Product Information Ultramid A3X2G7 07/2015 PA66-GF35 FR Product description A glass fibre reinforced injection moulding grade with improved flame retardance. Flame retardant based on red phosphorus; giving
More informationValox* Resin 357X Europe-Africa-Middle East: COMMERCIAL
VALOX 357X is an impact modified, flame retarted PBT+PC blend. Applications like bobbins, switches and enclosures. MECHANICAL Taber Abrasion, CS-17, 1 kg 33 mg/1000cy SABIC Method Tensile Stress, yield,
More informationHOSTAFORM C /9005 POM Unfilled
Description Hostaform C 9021 10/9005 is a nominal 9 melt flow rate acetal copolymer which is capable of being permanently marked by a laser. Parts molded from Hostaform C 9021 10/9005 can be laser marked
More informationTECHNICAL DATA SHEET GRILON AG-30 H
TECHNICAL DATA SHEET GRILON AG-30 H BLACK 9836 Product description Grilon AG-30 H black 9836 is a normal viscosity, specially heat stabilised PA 66 injection moulding grade with 30% glass fibres. Grilon
More informationSPORTS MARKET SOLUTIONS STRETCH THE LIMITS
SPORTS MARKET SOLUTIONS STRETCH THE LIMITS THE UNITED STATES IMPORTS 2 BILLION SHOES EACH YEAR New materials for connected fitness (wearable devices), substantial improvements in light-weighting, and enhanced
More informationVESTAMID HTplus - PA 6T/X and PA 10T/X product range and main properties
Technical Information VESTAMID - PA 6T/X and PA 10T/X product range and main properties The following pages provide an overview of the main product information and properties of VESTAMID - PA 6T/X and
More informationSABIC Innovative Plastics Valox 412 PBT (Europe-Africa-Middle East)
SABIC Innovative Plastics Valox 412 PBT (Europe-Africa-Middle East) Category : Polymer, Thermoplastic, Polyester, TP, Polybutylene Terephthalate (PBT) Material Notes: www.lookpolymers.com email : sales@lookpolymers.com
More informationDuPont Superstructural Web Seminar
DuPont Superstructural Web Seminar PUSHING BACK THE BARRIERS TO METAL REPLACEMENT February 28, 2006 DuPont Superstructural Web Seminar PUSHING BACK THE BARRIERS TO METAL REPLACEMENT The information and
More informationDuPont Zytel 70G43L NC010
Product Information PRODUCT INFORMATION Common features of Zytel nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good
More informationVECTRA A150 LCP Glass Reinforced
Description Improved creep resistance over A130. May reduce warpage in some parts compared to A130. 50% glass reinforced. Chemical abbreviation according to ISO 1043-1 : LCP Inherently flame retardant
More informationGrilamid LBV-50H FWA black 9225 EMS-GRIVORY a unit of EMS-CHEMIE AG
Grilamid LBV-50H FWA black 9225 PA12-GF50 Product Texts Product designation according to ISO 1874: PA12, MH, 18-120, GF50 Mechanical properties dry / cond Unit Test Standard Tensile Modulus 13500 / 12500
More informationTECHNYL A 218W V30 BLACK FA
TECHNICAL DATA SHEET TECHNYL A 218W V30 Black FA is a polyamide 66, reinforced with 30% of glass fibre, heat stabilized, for injection moulding. This grade offers an improved hydrolisis resistance, as
More informationDuPont Zytel 70G43L NC010
Product Information PRODUCT INFORMATION Common features of Zytel nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good
More informationAutomotive: Applications, Processes and products -- Fiberglass for PA Reinforcement. Dr. Heinz Zhang. Product R&D Center
Automotive: Applications, Processes and products -- Fiberglass for PA Reinforcement Dr. Heinz Zhang Product R&D Center Overview 1 Fiberglass Reinforced Thermoplastic Composites 2 PA & Fiberglass Reinforced
More informationengineering plastics Intelligent Solutions for Extrusion
engineering plastics Intelligent Solutions for Extrusion High Performance Extrusion Solutions from eurotec High Performance Extrusion Solutions from eurotec eurotec is an independent compounder of engineering
More informationTECHNICAL DATA SHEET GRILAMID L 25
TECHNICAL DATA SHEET GRILAMID L 25 General product description Grilamid L 25 is a high viscosity polyamide 12. This product has the following features: Very tasteless High toughness, even at low temperatures
More informationUltramid Endure. Dr. Manoranjan Prusty Product Development Manager BASF SE, Germany
Ultramid Endure A new family of polyamides (PAs) specifically been developed to tackle the elevated temperatures and aggressive chemicals found in automotive powertrain applications Dr. Manoranjan Prusty
More informationCYCOLOY Resin CX7240 Americas: COMMERCIAL
CYCOLOY CX7240 resin is an injection moldable PC/ABS blend. It contains non-brominated and non-chlorinated flame retardant systems to meet UL-94 V0 at 0.75mm, V1 at 0.6mm, V2 at 0.2mm and 5VB at 1.5mm
More informationProperty Test Condition Unit Standard typical Value -
Makrolon 6557 Flame retardant grades / Medium viscosity ISO Shortname MVR (300 C/1.2 kg) 10 cm³/10 min; flame retardant; UL 94V-0/3.0 mm; medium viscosity; UV stabilized; easy release; injection molding
More informationSABIC PC Resin PC0703R Asia Pacific: COMMERCIAL
PC0703R resin is a low flow (MFR = 7 at 300?C/1.2kg), heat and UV stabilized, polycarbonate product with mold release designed for use in the extrusion market. It is available exclusively at www.sabicpc.com
More informationDuPont Zytel 73G45 BK263
Product Information PRODUCT INFORMATION Common features of Zytel nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good
More informationTECHNICAL STUDY POSITIVE EFFECTS OF MONTAN WAXES ON THE MECHANICAL PROPERTIES OF PA 6 GF 30. Tensile Strength Impact Strength WARADUR E WARADUR OP
TECHNICAL STUDY POSITIVE EFFECTS OF MONTAN WAXES ON THE MECHANICAL PROPERTIES OF PA 6 GF 30 Tensile Strength Impact Strength WARADUR E WARADUR OP POSITIVE EFFECTS OF MONTAN WAXES ON THE MECHANICAL PROPERTIES
More informationstyrenics Sinkral for extrusion
styrenics Sinkral for extrusion versalis Sinkral ABS production site and research facilities versalis, the chemical company of eni, is a leading European producer of styrenic polymers. Our Sinkral ABS
More informationUnique Amorphous Silicon Dioxide a new additive for the PVC Formulator With Practical Case Studies
PVC Brighton, April 2008 Unique Amorphous Silicon Dioxide a new additive for the PVC Formulator With Practical Case Studies Stuart MacDonald - Technical Sales Manager Elkem Materials History of SIDISTAR
More informationCycoloy* Resin C2800 Europe-Africa-Middle East: COMMERCIAL
Non-chlorinated and non-brominated flame retardant PC+ABS offering balanced flow and impact properties for various applications. MECHANICAL Taber Abrasion, CS-17, 1 kg 72 mg/1000cy SABIC Method Tensile
More informationengineering plastics Intelligent Solutions for Flame Retardant Thermoplastics
engineering plastics Intelligent Solutions for Flame Retardant Thermoplastics Achieving Excellent Fire Protection with eurotec Flame Retardant Engineering Thermoplastics Due to miniaturization and increasing
More informationTECHNICAL DATA SHEET GRILON AG-35
TECHNICAL DATA SHEET GRILON AG-35 Grilon AG-35 is a heat stabilised, normal viscosity PA 66 injection moulding grade with 35% glass fibres. High stiffness High tensile strength High heat distortion temperature
More informationAKROMID Lite and AKROMID XtraLite Lower-Density Polyamide Compounds
AKROMID Lite and AKROMID XtraLite Lower-Density Polyamide Compounds AKRO-PLASTIC GmbH Member of the Feddersen Group For the last 25 years AKRO-PLASTIC GmbH has been a developer and manufacturer of high-quality
More informationFORTRON 6165A6 PPS Mineral / Glass Reinforced
Description Fortron 6165A6 is an easier flow version of Fortron 6165A4. It offers similar characteristics to the 6165A4. Applications include electronic components (i.e. lamps housings and sockets) and
More informationDuPont Zytel 70G33HS1L BK031
Product Information PRODUCT INFORMATION Common features of Zytel nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good
More informationLEXAN Resin 121R Asia Pacific: COMMERCIAL
Nonhalogenated. 17.5 MFR, for small, intricate parts. Internal mold release. MECHANICAL Tensile Stress, yld, Type I, 50 mm/min 62 MPa ASTM D 638 Tensile Stress, brk, Type I, 50 mm/min 68 MPa ASTM D 638
More informationDuPont Zytel 73G30L NC010
Product Information PRODUCT INFORMATION Common features of Zytel nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good
More informationDuPont Zytel 70G35HSLRA4 BK267
DuPont Zytel 70G35HSLRA4 K267 Product Information PRODUCT INFORMATION Common features of Zytel nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance
More informationDuPont Zytel HTN51G50HSL BK083 (Preliminary Data)
PRODUCT INFORMATION DuPont Zytel HTN51G50HSL K083 (Preliminary Product Information Zytel HTN high performance polyamide resins feature high retention of properties upon exposure to elevated temperature,
More informationDow Corning HMB-1103 Masterbatch
Product Information Plastics Dow Corning HMB-1103 Masterbatch FEATURES & BENEFITS When used in polar engineered plastics such as PA and POM, Dow Corning HMB-1103 Masterbatch demonstrates the benefits below
More informationTI Typical HDPE raw material and pipe test methods EDITION 0607 PAGE 1/10
PAGE 1/10 Typical HDPE raw material and pipe test methods We hereby want to provide an overview of the most common test methods Index Tests Page Density 2/10 Melt Index 2/10 Tensile Properties 3/10 Flexural
More informationAKROMID Lite and AKROMID XtraLite Lower-density Polyamide Compounds
AKROMID Lite and AKROMID XtraLite Lower-density Polyamide Compounds AKRO-PLASTIC GmbH Member of the Feddersen Group For the last 28 years AKRO-PLASTIC GmbH has been a developer and manufacturer of high-quality
More informationFOR THE HIGHEST STANDARDS IN METAL REPLACEMENT
TEREZ GT3 GT3X FOR THE HIGHEST STANDARDS IN METAL REPLACEMENT www.terplastics.com www.tergroup.com TEREZ GT3 GT3X Unmatched in stiffness, strength and flowability The subject of metal replacement already
More informationNoryl* Resin SE1GFN1 Europe-Africa-Middle East: COMMERCIAL
Noryl* SE1GFN1 is a 10% glass reinforced, injection moldable modified polyphenylene ether resin. Designed for improved dimensional stability and good flow, this resin also uses non-chlorinated, non-brominated
More informationDuPont Performance Polymers
DuPont Performance Polymers THE INDUSTRY S BROADEST PORTFOLIO OF RENEWABLY SOURCED MATERIALS UNIQUE MATERIAL SOLUTIONS MEET TODAY S SUSTAINABILITY CHALLENGE By tapping innovative technology and strategic
More informationDevelopment of ignition resistant thermo-plastic for meter design application. Giacomo Parisi, Dow Chemical
Development of ignition resistant thermo-plastic for meter design application Giacomo Parisi, Dow Chemical Topics: Dow in few words Sustainability and energy market Commitment to the meter market Development
More informationTECHNYL C 50H2 NATURAL
TECHNYL C 50H2 NATURAL Description TECHNYL C 50H2 Natural is a unreinforced melamine cyanurate flame retarded polyamide 6. This product is heat stabilised and can be used for injection moulding and extrusion
More informationCAMPUS Datasheet. Ultramid B3EG3 - PA6-GF15 BASF
CAMPUS Datasheet Ultramid B3EG3 - PA6-GF15 Product Texts Glass fibre reinforced injection moulding grade for housings (e.g: automotive mirror housings). Also used for wheels of mountain bikes. Rheological
More information