OUR LOCALLY MANUFACTURED RECYCLING BINS: PRODUCT & PRICING INFORMATION

Transcription

1 OUR LOCALLY MANUFACTURED RECYCLING BINS: PRODUCT & PRICING INFORMATION Please send queries to Tel: ; Fax: Postwink is registered as Postwink Sales CK 2007/114930/23 VAT no , PO Box 1368, Sea Point, 8060; Document last updated 21 May 2012

2 TABLE OF CONTENT Page 1. Why Recycle at your Premises 3 2. About our Company 3 3. Use of our Recycling Bins 4 4. Servicing of the Recycling Bins and Staff Awareness / Training 4 5. Branding your Recycling Bins 4 6. Colours used for Separating the Waste 5 7. EcoCyclinder Bins 100Lt 6 8. EcoLids (with or without base bins) 7 9. DeskSide bins Under Desk Recycling Bin Recycling Boxes Custom-made Leather-touch Recycling Bins SAVA Eco-Bins and R-PET Bins Stainless Steel Recycling Units Recycling Trolley Eco-Bin Wheelie Bins & Labels The Postwink Igloo Recycling Posters Lead times and General Information Lead time General Information and Terms and Conditions 19 How do I place an Order? 20 Contact Information 20 Friends and Partners 20 Page 2

3 1. Why Recycle at your Premises Recycling has been formally defined in the National Waste Management Strategy document as the separation at source of recyclable materials from the general waste stream and the reuse of these materials. The objectives of recycling are to save resources as well as reduce the environmental impact of waste by reducing the amount of waste disposed at landfills. Therefore, by recycling, we save our limited natural resources, we save our energy resources and we help combat global warming by reducing the amount of waste disposed of at landfills. According to a survey done in the United States, landfills are the largest human-caused producers of Methane, with Methane being a significant greenhouse gas. Methane has been found to be 20 times more potent than carbon dioxide in trapping heat in the atmosphere. And because Methane has a relatively short lifespan of 9 to 15 years, reducing Methane emissions is expected to be an effective way to reduce climate warming in a relatively short period of time. 1 However, recycling does not just have an enormous impact on our environment, recycling also makes a significant difference to your costs. Recycling will significantly reduce your current general waste and hence reduce your current costs of disposing of this waste. Therefore, the potential cost outlay of setting up a recycling initiative can be offset by this saving in general waste cost. 2. About our Company Postwink Recycling s distributes quality, yet practical, recycling products, in aim to promote a recycling culture and to encourage separation of waste at source. Postwink s products make your recycling easy. Founded in 2007, our unique product range includes large igloo-type recycling bins ( recycling banks ), stainless steel recycling units, colour-coded wheelie bins and a range of fully recyclable recycling bins of various sizes. Hence, our products are suitable for recycling initiatives at large and small companies, hotels, convention centres, business centres, shopping centres and schools, as well as being ideal for public spaces. In order to have a range of products of high quality, Postwink has teamed up with reputable companies that manufacture some products specifically for us or for whom we are their sole distributors. In other words, the majority of our products are unique. Furthermore, all our products are manufactured in South Africa. We deliver nationwide and beyond our borders. However, Postwink is aware that transporting goods has a negative impact on the environment. This is why we support the tree planting programmes implemented by Food and Trees For Africa (FTFA) and hence, in the process, reduce our carbon footprint. We do this by allowing in all our prices a contribution amount to Food and Trees For Africa s Trees for All programme. Postwink is a Level-4 BEE contributor, and we are hence fully BBBEE compliant. Postwink is also 100% female owned. 1 Reference: Page 3

4 3. Use of our Recycling Bins Our recycling bins can be used to collect some or all of the following materials: Glass Paper Plastic Tins and Cans Organic or Wet waste (such as collecting food waste and biodegradable packaging before it is composted) Non-Recyclables (such as general waste) Recyclables or Dry Waste (such a bin would collect all recyclable or dry waste, with the intention of your recycling collector sorting it into the various waste types for recycling.) 4. Servicing of the Recycling Bins and Staff Awareness / Training Should you require assistance with emptying our recycling bins, we will either put you in touch with a reputable company (whether a recycling collector or a waste management company) or coordinate the full implementation of your recycling programme, depending on your needs. Furthermore, to ensure that Postwink recycling bins are used effectively by your employees, cleaning contractors and/or scholars, we team up with qualified, reputable companies who will provide you with relevant and certified training that will suit your needs and budget. Postwink recycling posters are also available to help your staff learn how to separate their waste. 5. Branding your Recycling Bins Please ask us about personalising your recycling bins with your corporate logo. For some of our products (such as the leather-touch bins), we are able to provide this service at no extra charge. For other products, a minimal rate applies. Leather-touch 3-compartment with Anglo American logo Page 4

5 6. Colours used for Separating the Waste There are currently no formal standard for colours used to differentiate the various recyclable waste. However, there are most used colours, which we try to adhere to. Hence, unless requested otherwise, we will use the following colours for your orders: Blue for Paper Green for Glass Yellow for Plastics Silver or Red for Cans, Tins and other Ferrous Metals Brown or Green for compostable and food waste Red for Hazardous waste Charcoal or Black for General, non-recyclable waste The next sections provide more information on our range of products. Page 5

6 7. EcoCyclinder Bins 100Lt Our 100 litre indoor rotomoulded EcoCylinder bins are made of recyclable plastic (polyethylene), are extremely robust and are manufactured locally. These have a removable lid with cut-out throwin holes. The top of each lid is applied with a colourful, durable vinyl, which also states the waste type that it is intended for. This Recycling bin is currently available with two or three compartments or for a single waste use. The 2- and 3-compartment EcoCylinders include sturdy inner removable sleeves to separate the waste. Standard-size liners can be used. 3-waste EcoCylinder (Charcoal): Closed & Open 1-waste EcoCylinder (Charcoal) 100-litre capacity 485mm diameter x 660mm height Throw-in hole: 150mm diameter for singlewaste EcoCylinder Throw-in holes: 115mm diameter for 3- waste EcoCylinder Labelling of the lid is layered for durability and scratch-resistance Made of polyethylene (100% recyclable) Available in Charcoal or Matte Silver Personalise the bin body with your logo (an additional charge will apply) 1-waste EcoCylinder (Matte Silver) 2-waste EcoCylinder EcoCylinder Recycling Bin Excl. VAT, Excl. Delivery 1-waste EcoCylinder bin PR102 R waste EcoCylinder bin PR126 R waste EcoCylinder bin PR103 R Vinyl Branding (centre band)# AD006 R 260 # Price of branding reduces as the order quantity increases (from 4 units onwards). Page 6

7 8. EcoLids (with or without base bins) EcoLids turn various standard bins into colourful recycling bins: so if your bin has a diameter between 40cm and 53cm wide, then an EcoLid would fit your litter bin and turn it into a recycling bin. EcoLids can be embossed with the following waste types: Paper Plastic Glass Tin Food Other General Waste Recyclables Non-Recyclable Back of a Glass EcoLid EcoLids are great for schools, canteens, hotel kitchens, as well as outdoor areas as their robustness will conquer any weather conditions, making them highly durable. EcoLids fit a variety of standard bins, some of which can be purchased together with the lids. The various bins available include: Cement/cobble bins or a 100litre quality polyethylene bin. Note that these fit the standard 85 litre ash bin (black bin with lid previously used by various municipalities). Recycling Bin Excl. VAT, Excl. Delivery EcoLids PR105 R 320 Prices for the EcoLids together with various bin options are provided in the following pages. Please ask us about our latest EcoLid promotions, aimed at promoting recycling at schools. Page 7

8 8.1. EcoLids on cement/cobble bins ideal for outdoor and public spaces Recycling Bin Excl. VAT, Excl. Delivery EcoLids PR105 R Litre Cement Cobble bins (500mm diam x 760mm H) OT111 R Total Bin R EcoLids on cement/ cobble bins at the CTICC (Cape Town International Convention Centre) 8.2. EcoLids on 100L EcoCylinder bins ideal where branding and/or a quality look is needed Recycling Bin Excl. VAT, Excl. Delivery EcoLids PR105 R Litre EcoCylinder base Charcoal, 49cm wide x 58cm high PR104 R 499 robust, recyclable polyethylene Total Bin R 799 EcoLid on 100lt EcoCylinder base 9. DeskSide bins Under Desk Recycling Bin Made of polypropylene (PP), this square-shaped 16.5 litre waste bin has a lip for easy pick-up. The approximate dimensions are (with lip): 27cm wide (top width, per side) x 24cm wide (bottom width, per side) x 30cm high. These can be ordered in blue for paper collection, or light grey with varying colours of recycling logos and waste names on its surface. Note that these are not recommended for heavy collections L DeskSide bins Price Excl. VAT & Delivery Orders of less than 50 units PI107 R 70 Orders of 50 units and over PI107 R 63 Page 8

9 10. Recycling Boxes The Recycling box is a space and cost efficient recycling bin for household and office use. The unit is made from polypropylene fabric (100% recyclable), recycled plastic (100% recycled) and Masonite (a woodfibre board, which is biodegradable). These are mainly manufactured by developing communities, promoting employment opportunities. Small Recycling Box: 340 x 340 x 400mm H excl. VAT and delivery Single unit OT118 R 161 Set of 3 units saving of 15% OT114 R 408 Set of 4 units saving of 18% OT115 R 529 Large Recycling Box: 350 x 350 x 800mm H excl. VAT and delivery Single unit OT119 R 207 Set of 3 units saving of 14% OT116 R 533 Set of 4 units saving of 16% OT117 R 695 Available in black, blue, red, green, orange, yellow Waste types available (only in matching colours to the box): o Paper, o Glass, o Tin o Plastic o Mixed o Other. Flat packed for more efficient shipping. Personalised labels available at an extra cost. Promotes job creation. Page 9

10 11. Custom-made Leather-touch Recycling Bins Made of recycled and recyclable ABS (polystyrene) plastic, these recycling bins are scratch-resistant and are ideally-suited for corporate offices. These are printed with the recyclables and waste name information, and can be branded with your corporate logo at no additional cost. These come in 3-compartments or single-compartment units and all units come in black. The 3-compartment version is ideal for offices that want to separate waste at source and can include a battery-collector on its side or a cardboard-collection sleeve at the back. The dimensions are 350 x 700 x 600mm High (length excluding any add-ons). 3-Compartment (closed) 3-Compartment (open) With cardboard sleeve add-on 3-Compartment with Battery Collector 1-compartment unit for CFLs 1-compartment unit for Batteries and size comparison 3-compartment black leather-touch bin 350 x 700 x 600mm H Excl. VAT, Excl. Delivery Order of 1 to 5 units (no add-ons) PC120 R Order of 6 to 20 units (no add-ons) PC120 R Order of 21 to 50 units (no add-ons) PC120 R Add-on sleeve for cardboard collection AD016 R 108 Add-on sleeve for battery collection AD017 R 35 1-compartment black leather-touch bin 350 x 400 x 600mm H Excl. VAT, Excl. Delivery Order of 1 to 9 units PC122 R Order of 10 to 50 units PC122 R 949 Page 10

11 12. SAVA Eco-Bins and R-PET Bins The SAVA Eco-bins and R-PET bins are made by local communities and micro-enterprises, and use recycled materials in their manufacture. The SAVA Eco-bins are: Made out of old billboards (PVC), recycled PVC, recycled polypropylene (PP), used corex boards, recycled PET and recycled plastic bag waste (PE-LD). Have 2 divisions Come with a selection of 9 waste names that can be used to label each partition, such as: recycling, rubbish, plastic, paper, glass, cans, tetrapak, cartridges, other. Have dimensions: 350 x 350 x 600mm H Come in Black only Corporate Branding can be done with vinyl at an additional cost. The R-PET bins are: Made of R-Pet fabric which is recycled plastic (PET). Each corner of the bin has a recycled plastic pole and the sides of the bin use corrugated cardboard for rigidity. The compartments are also made using this corrugated cardboard. Have either 2 or 4 divisions Your selected waste names are printed on tags inserted by the relevant throw-in hole. Have dimensions: 340 x 340 x 400mm H Come in Black, Beige or White Corporate Branding can be printing onto the fabric at an additional cost. Minimum order quantity of 50 units. Recycling Bin 2-compartment SAVA bin (black only) 350 x 350 x 600mm H 4-compartment RPET bin 340 x 340 x 400mm H (Min qty of 50 units) Excl. VAT, Excl. Delivery OT127 R 208 OT125 R 199 Page 11

12 13. Stainless Steel Recycling Units Stainless steel ensures a sophisticated and corporate look, and can be used indoor or outdoor by adjusting the grade of stainless steel used. Therefore, this product range is ideal for offices, hotels, shopping centres or convention centres. These are also ideal for public spaces. Our recycling units have various designs and can come with a varying number of compartments. The different designs are: 1. The Flat Top: This unit has large rectangular flaps into which one throws the recyclables. It also has a flat top, lockable doors and separate steel inner bins. 2. The Peak Top: This unit has a peak top with more narrow rectangular flaps into which to throw the recyclables. Lockable doors and separate steel inner bins included. 3. The Hole Top: This unit has a slightly slanted top with cut-out holes on the top of the bin for easy throwing of the recyclables into the inners. Lockable doors and separate steel inner bins included. 4. The Office Miniature: this bin is a small version of the Hole Top bin with a hinged lid that lifts up, and wire frame inners to secure your disposable liners. The Flat top 130 W x 45 D x100cm H The Peak top 130 W x 45 D x100cm H The Hole top The Office Shortie Closed & Open 115 W x 50 D x 93cm H 115 W x 50 D x 66cm H The Flat Top and the Peak Top designs can be done in 2-, 3- or 4-compartments. The Hole Top can be done in 3- or 4-compartments. Page 12

13 The Flat-Top with 2-compartments 0.9mL x 0.45mW x1.0 H The Flat Top with 4-compartments (Open) 1.7mL x 0.45mW x1m H Specifications The doors can be made lockable using a cam-lock key system, or can be magnetised for easy closure without locking them. (This excludes the Office Miniature which does not have doors, but a hinged lid); Inner galvanised steel bins (into which the waste is thrown into) are inside each compartment of each unit this excludes the Office Miniature which has wire frame inners. Bins suitable for outside conditions if ordered using #304 grade stainless steel else the #430 material is generally used. No sharp corners - all corners rounded for safety One label per compartment is included s guaranteed for a year for any manufacturing defaults Additional Options available (at an additional cost): Powder-coating in different colours. Corporate or personalised branding can be added, as well as additional labelling Perforation of the material (when required for security purposes, for example at airports) Prices of Stainless steel Recycling Units based on grade #430 (indoor grade) Recycling Bin FLAT TOP with 2-compartments: 0.9 x 0.45 x 1.0m H FLAT TOP with 3-compartments: 1.3 x 0.45 x 1.0m H FLAT TOP with 4-compartments: 1.7 x 0.45 x 1.0m H PEAK TOP with 2-compartments: 0.9 x 0.45 x 1.0m H PEAK TOP with 3-compartments: 1.3 x 0.45 x 1.0m H PEAK TOP with 4-compartments: 1.7 x 0.45 x 1.0m H HOLE TOP with 3-compartments: 1.15 x 0.5 x 0.93m H HOLE TOP with 4-compartments: 1.5 x 0.5 x 0.93m H The OFFICE SHORTIE with 3- compartments: 1.15 x 0.5 x 0.66H Prices per unit, based on varying order quantity excl. VAT & Delivery 1 unit 2 units 3 units 4 units 5 units 10 units SS R R R R R R SS R R R R R R SS R R R R R R SS R R R R R R SS R R R R R R SS R R R R R R SS R R R R R R SS R R R R R R SS R R R R R R Page 13

14 14. Recycling Trolley Well-known for being a recycle bin situated at the entrances of Pick 'n Pays nationwide, these Recycling Trolleys are now available to all Postwink customers nationwide. All units come with 4 compartments and removable durable rotomoulded inners. The standard unit comes with a backboard and is fitted with wheels. However, these can also be wall-mounted instead of being on wheels and can be supplied without backboard. Powder-coated steel work can also be replaced with painted galvanised steel for outdoor usage. Overall dimensions (including the backboard): 1150mm wide X 500mm deep X 1580mm high. Recycling Bin Excl. VAT, Excl. Delivery 4-compartment Recycling Trolley w/backboard (based on powder-coated mild steel body) R Eco-Bin The unique Eco-Bin range, patented by Spoor & Fisher, is South Africa s first outdoor compartmentalised recycling system. It is made of cement and is extremely robust, withstanding any weather conditions. Available in Mini (360 litre) and Maxi (720 litre) capacities 100% Recyclable and Environmentfriendly Constructed out of Natural Sediment and Concrete Available natural or branded with corporate messaging Unique, failsafe locking system Recycling Bin Excl. VAT, Excl. Delivery Mini Eco-Bin (360 litres), incl. 1 master key & 3 liners R Maxi Eco-Bin (720 litres), incl. 1 master key & 3 liners R Page 14

15 16. Wheelie Bins & Labels We have wheelie-bins in green, blue, yellow, red, white and charcoal, available in the bigger size 240 Litres and the smaller 140 litres. The 240Lt wheelie bins in charcoal can also be ordered with colour lids (subject to a minimum order quantity of 12 units). The outer dimensions of 240Lt wheelie bins are: 580mm x 600mm x 1075mm high, while the dimensions of the 140Lt wheelie bins are: 587mm x 482mm x 1009mm high. We can also brand the wheelie bins with recycling logos and waste names using vinyl labels, as well as do cut-out holes and provide a locking system as per the picture below. Our range of wheelie bin labels (size 270mm x 230mm) can be ordered together with our wheelie bins as per the range below: Recycling Bin Excl. VAT, Excl. Delivery 240 litre wheelie bin - full colour ** PI202 R litre wheelie bin charcoal with colour lid ** PI203 R litre wheelie bin full colour PI204 R 475 Wheelie bin labels # AD001 R 29 AD010 Cut-out throw-in holes or Locking System AD011 ** Orders of 20 units or more for the 240L Wheelie bins reduces the price to R545 per unit. # Additional application charges may apply R 95 Page 15

16 17. The Postwink Igloo 2 Postwink is proud to have launched our igloo one which is made in South Africa and which is ideal for the South African recycling environment. This igloo recycling bin neatly collects any kind of bulk recyclable waste and is ideal for school grounds, corporate parking lots and shopping centres, among others. You are able to throw your recyclable into one of the three openings and these recyclables are directed into either a 1-ton capacity bulk bag or 3 separate 210 litre drums (available separately). Importantly, these recycling igloos can be emptied by all recycling collectors, as it only requires manual handling to empty, by either opening the top or the front openings. Postwink igloos (front view): 1.4m x 1.3m x 1.5m H Open with bulk bag as liner Specifications Locking system with cam locks Made of robust plastic (polyethelene), which is 100% recyclable. Using a bulk bag, the capacity of this bin is 1000 litres. If 3 drums are used (for the heavier glass collections for example), the total bin capacity is reduced to 630 litres. Chutes are fitted at each throw-in hole to secure the bulk bags or ensure that bottles easily go into the drums. s guaranteed for a year for any manufacturing defaults. Three sides of the bin have recessed panels, specifically designed to add corporate branding or a recycling message. A waste name is placed on top of each hole, by means of white cut-out vinyl letters (such as: paper, tin cans, glass, plastic). A range of colours is available, including blue, green, yellow, orange, red, matt silver, charcoal. Oval throw-in hole size is 35 x 20cm New locking system: Front doors and top lid lockable using secure cam locks. 2 The Postwink Igloo design is registered in the name of Postwink Sales CC with the South African Design Office (Design registration number F2011/00148). As such, Postwink is entitled to enforce its rights in the Design against any person who makes, imports, uses or disposes of any article which embodies or is similar to the Design. Page 16

17 Add-ons The following can be provided together with the product, at an additional cost: 1-ton capacity Bulk bags and/or 210L steel or plastic drums Cast Vinyl Decals for branding or to add a recycling message on the front doors and sides of the igloo. Igloo Price Recycling Bin Excl. VAT, Excl. Delivery Postwink Igloo 1.3 x 1.4 x 1.5m H PR305 R ton capacity bulk bag (to use as liners) AD012 R 150 Refurbished open-top steel drums (to use as liners for Glass collection)* AD013 R 120 Full branding: Cast UV Varnished Vinyl 2 front, 2 sides ** AD015 R 845 Half-Branding: Cast UV varnished vinyl for front doors only AD018 R 420 *3 drums per igloo would be required. ** Discount on branding for orders of 20 units and more. Page 17

18 18. Recycling Posters Help your staff or students to separate their recyclable waste with A3 full colour posters, printed on recycled paper. Recycling Identification Posters - A3 size Excl. VAT, Excl. Delivery Orders of less than 20 units AD019 R 29 Orders of 20 units and more AD019 R 21 Page 18

19 19. Lead times and General Information 19.1 Lead time An order for the locally made products will be subject to the quantity ordered and the time at which the order is being placed. It will usually vary between 1-4 weeks General Information and Terms and Conditions All prices provided exclude delivery costs, with most products being dispatched from Cape Town. Because of the size of some of the bins, these delivery costs may be significant, hence please request a formal quotation for a more accurate cost estimate including transport to the required location. Except for the leather-touch bins, prices do not include the costs of corporate branding using vinyl or other methods. Please specify your requirements in writing so that we may quote you accordingly. Prices may vary based on quantity. Hence, please request a formal quotation based on your actual order quantity in order to see the applicable pricing. Manufacturing of the order will not commence until the order has been confirmed with a 50% deposit of the total quotation. Balance of payment is required strictly on dispatch. We reserve the right to deliver your order in part-shipments if we feel this makes economic and practical sense. s (including artwork/design work) will remain the property of Postwink until the account is settled in full. Dimensions provided in this brochure may have been rounded and may differ slightly to the actual product dimensions on manufacturing. Our prices are subject to change without prior notice. This is especially true for stainless steel products, whose prices fluctuate according to international steel prices. All our products include a contribution towards one of the tree planting programmes implemented by Food and Trees For Africa. We will gladly disclose the contributions raised as a result of your order. The stainless steel recycling units, EcoCylinders, igloos, wheelie bin labels and posters shown herein are Postwink s intellectual property. Postwink is the owner of the various literary and artistic works embodied in its Designs, brochures and website, as determined by the Copyright Act, Any unauthorised reproduction, adaptation or publication of the work is strictly prohibited. The Postwink igloo and EcoCylinder recycling bins have moulds which are jointly owned by Postwink and its manufacturing factory. The Postwink Igloo design has also been registered with the South African Design Office (Design registration number F2011/00148). As such, Postwink is entitled to enforce its rights in the Design against any person who makes, imports, uses or disposes of any article which embodies or is similar to the Design. Other products included in this brochure are our supplier s intellectual property and hence similarly cannot be recreated or copied without consent. Postwink is the sole distributor of the Recycling Trolley and EcoLid. Orders are subject to our complete set of Terms and Conditions, a copy of which will be provided on request. E&OE. Page 19

20 How do I place an Order? Please send your quotation or order requests by to info@postwink.co.za, or fax to A formal quotation will then follow by for your approval. Contact Information info@postwink.co.za Tel: Fax: PO Box 1368, Sea Point, 8060, Cape Town, Western Cape We deliver nationwide. Friends and Partners Note: Images of Postwink products have been taken for the sole use of Postwink. Images and copy may not be lifted from the Postwink brochure, website or otherwise, except when permission has been sought and granted in writing. Page 20