Water Testing Services Limited (Trading as) The Water Lab

Transcription

1 Water Testing Services Limited (Trading as) The Water Lab Unit C3, M4 Business Park, Celbridge, Co. Kildare Testing Laboratory Registration number: 339T is accredited by the Irish National Board (INAB) to undertake testing as detailed in the Schedule bearing the Registration Number detailed above, in compliance with the International Standard ISO/IEC 17025: nd Edition General Requirements for the Competence of Testing and Calibration Laboratories (This Certificate must be read in conjunction with the Annexed Schedule of ) Date of award of accreditation: 08:12:2015 Date of last renewal of accreditation: n/a Expiry date of this certificate of accreditation: 08:12:2020 This shall remain in force until further notice subject to continuing compliance with INAB accreditation criteria, ISO/IEC and any further requirements specified by the Irish National Board. Manager: Dr Adrienne Duff Chairperson: Mr Tom O Neill Issued on 08 December 2015 Organisations are subject to annual surveillance and are re-assessed every five years. The renewal date on this Certificate confirms the latest date of renewal of accreditation. To confirm the validity of this Certificate, please contact the Irish National Board. INAB is a signatory of the European co-operation for (EA) Multilateral Agreement (MLA) and the International Laboratory Cooperation (ILAC) Mutual Recognition Arrangement, for Testing. Edition 6, 23/11/ T Page 1 of 12

2 Schedule of (Annex to Certificate) (TRADING AS) THE WATER LAB Chemical and Biological Testing Laboratory Initial Registration Date : 08-December-2015 Chemical Testing 15-February-2017 Biological Testing Postal Address: (Address of other locations as they apply) Unit C3, M4 Business Park, Celbridge, Co. Kildare Telephone: +353 (1) Fax: +353 (1) info@thewaterlab.ie Contact Name: Niall Mathews Facilities: Public testing service Edition 6, 23/11/ T Page 2 of 12

3 Schedule of THE IRISH NATIONAL ACCREDITATION BOARD (INAB) is the Irish body for the accreditation of organisations including laboratories. Laboratory accreditation is available to testing and calibration facilities operated by manufacturing organisations, government departments, educational institutions and commercial testing/calibration services. Indeed, any organisation involved in testing, measurement or calibration in any area of technology can seek accreditation for the work it is undertaking. Each accredited laboratory has been assessed by skilled specialist assessors and found to meet criteria which are in compliance with ISO/IEC or ISO (medical laboratories). Frequent audits, together with periodic inter-laboratory test programmes, ensure that these standards of operation are maintained. Testing and Calibration Categories: : Permanent laboratory calibration and testing where the laboratory is erected on a fixed location for a period expected to be greater than three years. Category B: Category C: Category D: Site calibration and testing that is performed by staff sent out on site by a permanent laboratory that is accredited by the Irish National Board. Site calibration and testing that is performed in a site/mobile laboratory or by staff sent out by such a laboratory, the operation of which is the responsibility of a permanent laboratory accredited by the Irish National Board. Site calibration and testing that is performed on site by individuals and organisations that do not have a permanent calibration/testing laboratory. Testing may be performed using (a) (b) (c) (d) portable test equipment a site laboratory a mobile laboratory or equipment from a mobile or site laboratory Standard Specification or Test Procedure Used: The standard specification or test procedure that is accredited is the issue that is current on the date of the most recent visit, unless otherwise stated. Glossary of Terms Facilities: Public calibration/testing service: Conditionally available for public calibration/testing: Normally not available for public calibration/testing: Commercial operations which actively seek work from others. Established for another primary purpose but, more commonly than not, is available for outside work. Unavailable for public calibration/testing more often than not. Laboratory users wishing to obtain assurance that calibration or test results are reliable and carried out to the Irish National Board criteria should insist on receiving an accredited calibration certificate or test report. Users should contact the laboratory directly to ensure that this scope of accreditation is current. INAB will, on request, verify the status and scope. Edition 6, 23/11/ T Page 3 of 12

4 .01 for potable ph SOP-LTM-004 (ph Probe) and domestic purposes 4-10 ph units Section 4500-H +.04 Sewage cbod mg/l O 2 Total BOD mg/l O 2 SOP-LTM-001 methods based on Standard of Water & Wastewater 22 nd Edition APHA. Section 5210-B 5210-B Chemical Oxygen Demand mg/l O 2 SOP-LTM-002 methods based on Standard of Water & Wastewater 22 nd Edition APHA. Section 5220-D Edition 6, 23/11/ T Page 4 of 12

5 .04 Sewage Total Suspended Solids SOP-LTM mg/l methods based on Standard of Water & Wastewater 22 nd Edition APHA. Section 2540-D ph SOP-LTM-004 (ph Probe) 4-10 ph units Section 4500-H + Total Nitrogen SOP-LTM-005(Colorimetry) mg/l N Section 4500-N Edition 6, 23/11/ T Page 5 of 12

6 .04 Sewage Total Phosphorous SOP-LTM-006 (Colorimetry) mg/l P 22nd Edition APHA. Section 4500-P Ammonia SOP-LTM-007 (Colorimetry) mg/l NH 3 -N Section 4500-NH 3.05 Trade wastes Biochemical Oxygen Demand SOP-LTM-001 (Oxygen mg/l O 2 Probe) 22nd Edition APHA. Section 5210-D Edition 6, 23/11/ T Page 6 of 12

7 .05 Trade wastes Total Suspended Solids SOP-LTM-003 (Gravimetry) mg/l Section 5220-D ph SOP-LTM-004 (ph Probe) 4-10 ph Units Section 4500-H + Total Nitrogen SOP-LTM-005 (Colorimetry) mg/l N Section 4500-N Edition 6, 23/11/ T Page 7 of 12

8 .05 Trade wastes Total Phosphorous SOP-LTM-006 (Colorimetry) mg/l P 22nd Edition APHA. Section 4500-P Ammonia SOP-LTM-007 (Colorimetry) mg/l NH 3 -N Section 4500-NH 3 Edition 6, 23/11/ T Page 8 of 12

9 .06 Saline waters Total Suspended Solids SOP-LTM-003 (Gravimetry) mg/l Section 5220-D ph SOP-LTM-004 (ph Probe) 4-10 ph units Section 4500-H +.08 Waste water treatment plant effluent (WWTP effluent) cbod mg/l O 2 Total BOD mg/l O 2 SOP-LTM-001 methods based on Standard of Water & Wastewater 22 nd Edition APHA. Section 5210-B 5210-D Edition 6, 23/11/ T Page 9 of 12

10 .08 Waste water Chemical Oxygen Demand SOP-LTM-002 treatment plant mg/l O 2 effluent (WWTP methods based on Standard effluent) of Water & Wastewater 22 nd Edition APHA. Section 5220-D Total Suspended Solids SOP-LTM mg/l methods based on Standard of Water & Wastewater 22 nd Edition APHA. Section 2540-D Total Nitrogen SOP-LTM-005 (Colorimetry) mg/l N Section 4500-N Edition 6, 23/11/ T Page 10 of 12

11 .08 Waste water Total Phosphorous SOP-LTM-006 (Colorimetry) treatment plant mg/l P effluent (WWTP effluent) 22nd Edition APHA. Section 4500-P ph SOP-LTM-004 (ph Probe) 4-10 ph units Section 4500-H + Ammonia SOP-LTM-007 (Colorimetry) mg/l NH 3 -N Section 4500-NH 3 Edition 6, 23/11/ T Page 11 of 12

12 Biological Testing Laboratory 870, including effluents.25 Waste water Detection and Enumeration of SOP-LTM-033-Faecal treatment plant Faecal Coliforms by Membrane Coliforms effluent (WWTP Filtration/ Incubation effluent) 22nd Edition APHA. Section 9222-D Edition 6, 23/11/ T Page 12 of 12