Codes and Standards Initiative Sponsors
|
|
- Melinda Cross
- 5 years ago
- Views:
Transcription
1 Codes and Standards Initiative Sponsors 1
2 Who is Mass Save? Mass Save is an initiative sponsored by Massachusetts gas and electric utilities and energy efficiency service providers, including Columbia Gas of Massachusetts, The Berkshire Gas Company, Cape Light Compact, Eversource Energy, National Grid, Liberty Utilities, and Unitil. The Sponsors of Mass Save work closely with the Massachusetts Department of Energy Resources to provide a wide range of services, incentives, trainings, and information promoting energy efficiency that help residents and businesses manage energy use and related costs. 2
3 Residential New Construction Offers Low-Rise New Construction Performance Path based upon a % improvement over the MA baseline Prescriptive Path incentives for measures beyond MA baseline High-Rise New Construction Incentives based upon actual measures Please visit for the details on all available incentives. 3
4 Commercial New Construction Offers Incentives for efficiency levels beyond code: Whole building incentives System incentives including Air Compressors Chillers Lighting and Lighting Controls Gas-Fired Heating Equipment Variable Speed Drives Custom Measures And more We also offer incentives and rebates for existing buildings as well. Please visit for the details. 4
5 Massachusetts Energy Code Technical Support Initiative Commercial Energy Code Lighting, Lighting Control & Electrical Provisions These materials 2014 Conservation Services Group, Inc. all rights reserved. - Unauthorized access or use is strictly prohibited. 5
6 AIA Continuing Education CLEAResult is a Registered Provider with The American Institute of Architects Continuing Education Systems. Credit earned on completion of this program will be reported to CES Records for AIA members. Certificates of Completion for non- AIA members are available on request. This program is registered with the AIA/CES for continuing professional education. As such, it does not include content that may be deemed or construed to be an approval or endorsement by the AIA of any material of construction or any method or manner of handling, using, distributing, or dealing in any material or product. Questions related to specific materials, methods, and services will be addressed at the conclusion of this presentation. 6
7 Disclosure These trainings are being offered through the support of Mass Save and in cooperation with the Massachusetts Board of Building Regulations and Standards (BBRS). The Energy Code Technical Support staff, consisting of CLEAResult and other contractors, are not code officials, and the information provided through the program is not a formal interpretation of the code. Your local building code official is responsible for the enforcement of the code and the Massachusetts BBRS is the governing body responsible for interpretations of the code. 7
8 Mass Save Energy Code Technical Support Project Specific Code Assistance MA code officials Design professionals Contractors Sub contractors Material suppliers Toll-free energy code support Phone assistance Office visits Project site visits 8
9 Learning Objectives To become familiar with the electric and lighting provisions of the 2012 Massachusetts Energy Conservation Code 9
10 Agenda Introductions Scope and Application Interior Lighting Power Density Lighting Controls Exterior Lighting Lighting Power Density Lighting Controls Additional Efficiency Packages Compliance 10
11 Energy Savings 45% 30% 35 40% 15% 0%
12 Code Reference Materials 12
13 Scope and Application 13
14 Commercial Compliance Commercial Compliance Prescriptive IECC ASHRAE Scope and application Envelope HVAC Lighting Service Water Heating Alternative Options Interior Exterior Controls 14
15 R Mixed Occupancy If both residential and commercial uses are present, each occupancy shall be separately considered and meet the applicable IECC provisions Residential = 2012 IECC Residential Commercial = 2012 IECC Commercial 15
16 2012 IECC versus 2010 ASHRAE 90.1 Higher (less stringent) lighting power density Lighting controls required for different spaces Manual controls allowed for daylight zones No parking garage lighting controls No room geometry adjustment allowed Bi-level switching required Lower (more stringent) lighting power density Lighting controls required for different spaces Multilevel lighting controls always required for daylight zones Parking garage lighting controls Room geometry adjustment allowed for spaces 16
17 Additional Efficiency Package Options C406.1 NEW! Buildings following the prescriptive path shall comply with at least one of the following: 1. Efficient HVAC Performance Minimum Efficiency Requirements for Mechanical Equipment Tables C406.2 (1-7) 2. Efficient Lighting Systems Reduced LPD per Table C On-Site Renewable Energy Systems Provide for 1.75 Btu or 0.50 Watts per ft 2 of Conditioned Floor Area 4. For onsite use of biomass fuel, provided not less than 65 percent of the energy used within the building for space and service water heating using sealed combustion mechanical equipment rated at a minimum of 85 AFUE. The biomass shall meet the eligible fuel and emission criteria under M.C.L. c. 25A. 11 F (Massachusetts renewable energy portfolio standard). 17
18 Commercial Compliance Methods IECC 2012 & Massachusetts Amendments Prescriptive Checklists Software Based Compliance; COMcheck ASHRAE 90.1 Compliance Building Performance Methodology: Energy Cost Budget Method (Section11) C Compliance with a code official approved above code program/performance protocol 18
19 Stretch Code Commercial Compliance New Construction (0-4,999 sq. ft) New Construction (5, ,000 sq ft) New Construction (above 100,000 sq ft) Supermarket, Labs Warehouse(<40,000 sq ft) Supermarket, Labs Warehouse(>39,999 sq ft) Stretch Code Performance Option Stretch Code Prescriptive Option Not Subject to Stretch Code 20% below Section Prescriptive Path Base Code 2012 IECC plus MA amendments Not available 20% below Not available Not available Not Subject to Stretch Code 2012 IECC plus MA amendments 20% below Not available Not available Additions (>30% new floor area added to buildings >100,000 sq ft) 20% below Not available Not available Alterations and Repairs Not Subject to Stretch Code 2012 IECC plus MA amendments 19
20 Definitions: Residential & Commercial Buildings Residential Buildings: Detached One and Two- Family Dwellings Townhouses Residential Buildings 3 Stories or Less in Height Commercial Buildings: All Buildings not Defined as Residential Commercial Industrial Residential 4 Stories or More in Height Source: Shutterstock 20
21 Additions C Additions alone shall comply with the code (additions include any building systems added) Or; the entire building including the addition shall comply Exemption Storm windows installed over existing fenestrations 21
22 Alterations, Renovations & Repairs C Alterations, Renovations & Repairs Must conform As they relate to new construction Renovated, or altered components, portions, and systems must comply Repairs that relate to new construction Exceptions Unaltered portions of an existing building or building system Replacing less than 50% of the light fixtures in a space Replacing the lamps and ballasts in existing light fixtures without increasing energy use 22
23 Change in Occupancy or Use C If change in occupancy or use results in increased demand for fossil fuels or electricity, the space must comply with code Where the use in a space changes from one use in Table C (1) or (2) to another use in Table C (1) of (2), the installed lighting wattage shall comply with Section C405.5 > 23
24 Change in Space Conditioning C Unconditioned space that is converted to conditioned space must comply with code; including lighting > 24
25 Low Energy Buildings C102.1 Exempt from building envelope provisions: Buildings with a design rate of energy usage less than 3.4 Btu/h (or 1.0 watt) per ft 2 for space heating Buildings that contain no conditioned space No commercial buildings are exempt from lighting and service water heating provisions Source: bridgelux 25
26 Alternate Materials & Methods C102.1 The Energy Conservation Code does not intend to prevent the use of alternate material and methods provided such materials and methods have been approved by code officials as meeting the intent of the code. Source: Hotel Galéria Spirit 26
27 Building Electrical and Lighting Provisions 28
28 Lighting System Impact Energy for Lighting in C&I Buildings Accounts for Approximately 30% of Energy Use in Commercial Buildings Non- Regulated Hot Water Lighting Heating, Cooling 29
29 Lighting System Scope Applies to the design of: First installed lighting systems Altered or repaired systems that replace 50% or more of the luminaires Alterations that increase the lighting power density in the space Exempt: Lighting within dwelling units provided 75% or More of the Hard-Wired Fixtures use High Efficacy Lamps (Fluorescent or LED) Source: Mark A Steele Photography Inc. 30
30 Intent of Lighting Requirements Reduce hours of operation with lighting control requirements: Automatic Manual Reduce lighting power density: 2012 Requirements are more strict & include exterior lighting Incorporate Daylighting Credit: Energy Resource Solutions 31
31 Interior Lighting Power 32
32 IECC 2012 Lighting Mandates For lighting alterations/retrofits <50%: only the altered lighting needs to be brought up to code. However, IF this change does not increase the lighting power, THEN there is no need to bring anything up to code. When >50% or more of the luminaires in a space are replaced, that entire space or building must meet IECC 2012 code LPD requirements
33 Interior Lighting Power C405.5 Lighting power allowance (LPA) Maximum allowed lighting power density (LPD) LPD Lighting Total Watts/Ft 2 of Area Two paths: Building Area Space-by-Space Fixture Rated Wattage X Qty Area (Ft 2 ) 34
34 Table - Interior Lighting Power Allowance Tables Example Area & Space Types BUILDING AREA METHOD SPACE BY SPACE METHOD Building Area Type LPD Common Space Types LPD Automotive Facility 0.9 Automotive Service 0.7 Convention center 1.2 Convention Exhibit Space 1.5 Courthouse 1.2 Judge Chambers 1.3 Gymnasium 1.1 Gymnasium Fitness Area 0.9 Office 0.9 Office Enclosed 1.1 Parking Garage 0.3 Parking Garage Garage Area 0.2 Retail 1.4 Retail Sales Area
35 Lighting Power Allowance Calculate the total interior lighting power (Watts) / total floor area of each building area type = Lighting Power Density (LPD) LPD must be equal to or less than the LPD for the building area type listed in the code table 36
36 Measuring Interior Area 12 exterior walls (typical) from interior surface of envelope walls Office 75 ft from center of partition walls 8 partition 200 ft Locker Room 125 ft 37
37 Allowed Lighting Power Open 1.0 W/ft 2 7,500 ft 2 x 1.0 W/ft 2 = 7,500 W Locker 0.8 W/ft 2 12,500 ft 2 x 0.8 W/ft 2 = 10,000 W 75 ft 125 ft 200 ft Total Allowed Interior Lighting Power = 17,500 W 38
38 Interior Lighting Power Total connected interior lighting power includes: Fluorescent fixture rated wattage Screw-in socket labeled max wattage Low voltage lighting transformer rating Track 30 Watts/Ft or circuit breaker rating Source: Glumac 39
39 Interior Lighting Power C405.5 Total connected interior lighting power; including all interior lighting equipment, except: Sports Lighting (Professional/TV) Sleeping Units (hotels, etc.) Emergency (only) Lighting Special Needs Lighting Other Special Categories Source: Lamar Lighting Source: ALG online 40
40 Lighting Power Density What is the wattage of a fluorescent fixture? Source: OSRAM SYLVANIA 41
41 Lighting Power Density What is the wattage of a fluorescent fixture? Ballast or Fixture Manufacturers Data for the Lamp Ballast Combination TRIAD B EL Line Voltage: 120V AC +/- 10% Lamps Type # INPUT WATTS AMPS F32T8/ES F32T8/ES F32T F32T
42 Case Study: MacColl YMCA Code LPD 1.0 W/SF Designed LPD 0.78 W/SF Reduction 22% Projected annual energy savings - $4,224 Source: Ryan Construction 43
43 Review Interior lighting power density Calculating the actual power density Calculating the interior power allowance Source: a light Incentive Opportunity: Incentives available for exceeding code LPD 44
44 Optional Lighting Techniques 45
45 Efficient Lighting Sources & Techniques High efficacy lamps Electronic and other efficient ballasts Efficient lighting fixtures Focus on high quality lighting design Use smart lighting layouts Source: Golub Corp 46
46 High Performance Super T8 Fluorescent Systems Improved ballast and T8 lamp 20% improvement in system efficacy Low and full wattage versions Extended lamp life up to 50,000 hours Newest versions promise 100,000 hour life Adds 0%-10 % to system cost compared to typical instant-start T8 47
47 T8/T5? The T represents lamp shape tubular. The number following represents lamp diameter in eighths of an inch. A T5 has a diameter of 5/8. A T5 has miniature bi-pin bases while T8 and T12 lamps use medium bi-pin bases. 48
48 LED Solid State Lighting 49
49 Advantages of LED Lighting Energy efficient; 60 >100 L/W Directional; light where its needed long lifetime; up to 50,000 70% lumen maintenance Instant on; no warm-up period Dimmable; stepped or continuous with compatible driver & dimming systems Start in all temperatures; outdoor & cold storage applications Very good color rendering (80+ CRI) 50
50 Current LED Lighting Applications 51
51 Install Efficient Fixtures Efficiency is not just lamps and ballasts Fixtures with advanced photometric design and premium reflective surfaces offer improved efficiency Premium efficiency fixtures often allow the installation of fewer fixtures and/or fixtures with fewer lamps 52
52 Install Efficient Fixtures Efficiency Ranges Recessed Troffers Recessed Parabolic Recessed Indirect Pendant Indirect & D/I Recessed CFL 60% - 85% Overall 45% - 75% Overall 50% - 80% Overall 70% - 95% Overall 35% - 65% Overall Incentive Opportunity: Incentives available for exceeding code LPD 53
53 Interior lighting Controls 54
54 Manual Interior Lighting Controls C Independent manual controls are required for each enclosed space Controls must be within the space or provided with an on/off indicator Exceptions Security of emergency areas Stairways and corridors (means of egress) 55
55 Manual or Automatic Lighting Reduction Controls C Each space that is required to have manual controls, must also include controls to reduce lighting load by at least 50%: Manual or auto-dimming Or; Bi-level switching Or; Dual switching of alternate rows of luminaires Or; Switching each luminaire or each lamp Source: Leviton Lighting Management Solutions 56
56 Manual or Automatic Lighting Reduction Controls - Exceptions Exceptions apply Spaces with occupancy sensing Areas with one fixture Spaces < 0.6 W/ft 2 Corridors; restrooms; lobbies Source: Lamar Lighting 57
57 Additional Lighting Controls C Each space that is required to have manual controls, must also include: Automatic timer systems with override And/or; occupancy/vacancy sensors And/or; daylight zone controls Source: WattStopper 58
58 Interior Lighting Controls Simple Guide for Compliance: Private offices, conference rooms, classrooms: Vacancy sensor Daylit? Dimming ballasts & manual or auto dimmer No Daylight? Multi-level lighting exception due to vacancy sensor Open office areas: Timer or occupancy sensor Daylit Zones? - Dimming ballasts & manual or auto dimmer Break Rooms, janitor closets, restrooms Occupancy or vacancy sensor General & public areas: Daylit? - Dimming ballasts, manual/auto dimmer & timer No Daylight? - timer 59
59 Occupancy & Vacancy Controls What s the Difference? Occupancy sensors: Turns lights on upon sensing occupancy Turn lights off when space is vacated Best for open spaces and/or spaces lacking ambient light Vacancy sensors (occupancy sensors with manual ON ): Turn lights off when space is vacated Lights must be turned on manually Best for private offices with some ambient light 60
60 Network Lighting Controls Network Lighting Controls incentive: NLC exceeds IECC 2012 code lighting control requirements. NLC goals are to obtain substantial lighting kwh savings by using the full capabilities of digitally programmed and networked lighting controls and sensors. Delivers refined lighting control management Zones can be easily adjusted and redefined by owner or occupant Includes graphic dashboard showing locations and savings Can tie into HVAC system & BMS 61
61 Network Lighting Controls Project Qualifications: >25,000 sq/ft or greater New construction, major renovation and retrofit projects are eligible Pre-Qualified Lighting Control Systems required. Controls system must achieve 40% kwh savings below IECC 2012 (ComCheck) Requires the involvement of qualified lighting or engineering professional -PE., Lighting Certified LC or IALD Specifiers to participate 63
62 Network Lighting Controls NBI has published a Technical Application Guide on Network Lighting Controls at: default/files/lllc_zne_ta G.pdf 64
63 Daylighting and Envelope Requirements 65
64 Daylight Zone Controls Daylight Zones: Under skylights equal to the size of the skylight plus the floor-to-ceiling height Or; the dimension to a partition Or; ½ the distance to another fenestration Source: Daylighting Pattern Guide 66
65 Daylight Zone Controls Daylight Zones: Vertical glazing area adjacent to the glazing and: Extending into the space 15 or to a partition Glazing width plus 2 on either side Or; ½ the distance to another fenestration Credit: NREL - Joe Ryan 67
66 Daylighting Zone Daylight zone adjacent to fenestration in a wall Credit: IECC 68
67 Daylighting Zone Daylight zone under a rooftop monitor Credit: IECC 69
68 Daylighting Zone Daylight zone under a sloped rooftop monitor Credit: IECC 70
69 Daylighting Zone Daylight zone under a roof fenestration assembly Credit: IECC 71
70 Daylight Zone Controls C Daylight zones must have their own (manual or automatic) control Each zone maximum 2,500 ft 2 Exception: enclosed areas with two or fewer light fixtures Manual or automatic Continuous or stepped (50-70% + 35%) 72
71 Multi-Level & Daylight Zone Controls C Daylight Zones in areas with multi-level switching: General lighting must be daylight responsive Must be capable of dimming to minimum of 35% of total lighting load Continuous or stepped Source: RP Leslie, R Raghavan, O Howlett and C Eaton, The potential of simplified concepts for daylight harvesting 73
72 Multi-Level Ballasts C Continuous 5%>100% Stepped Bi-Level 50%>100% 74
73 Example: Classroom Application: 28 X 30 windowed classroom with 10 ceiling Windows face north Lighting: Indirect/direct T8 pendant with 0-10VDC dimming ballasts for general lighting Whiteboard is illuminated by compact fluorescent wall washers with standard electronic ballasts Source: Joe Ryan/NREL 75
74 Example: Classroom Source: ALG online 76
75 Example: Classroom Source: ALG online 77
76 Vertical Fenestrations Maximum Area C Vertical fenestrations limited to 30% of total above grade wall area Previous code the limit was 40% Source: originalgreen.org 78
77 Vertical Fenestrations Maximum Area with Daylight Controls C Vertical fenestration allowance increases to 40% of total above grade wall area If; at least 50% of floor area is within a daylit zone And; automatic daylight controls are installed And; visible light transmittance is 1.1 times the SHGC 79
78 Skylights - Maximum Area C Skylights limited to 3% of gross roof area Or; limited to 5% if automatic daylight controls are installed below skylights Source: Daylighting Pattern Guide 80
79 Skylights - Minimum Area C NEW Required; minimum skylight area for some spaces: Enclosed spaces greater than 10,000 ft 2 Ceiling heights greater than 15 Offices, lobbies, atriums, concourse, corridors, storage, gyms, convention centers, auto service, manufacturing, non-refrigerated warehouses, retail, distribution, transportation, workshops Daylight zone 50% of the floor area % of skylight area to daylight zone 3% Or; provide a minimum aperture of 1% 81
80 Skylights - Minimum Area C NEW Exceptions: LPDs less than 0.5 W/ft 2 Areas where objects block the daylight Areas with daylighting monitors Source: Advanced Lighting Guidelines 82
81 Lighting Controls Under Skylights C NEW All lighting in Daylight Zones must be controlled by multi-level lighting controls as specified in the lighting section C NOTE: This is only applicable when skylights are required per section Source: Daylighting Pattern Guide 83
82 Source: BMG 84
83 OS Auto Daylighting Controls OS Auto Daylighting Controls OS OS OS OS OS OS S OS OS S Auto Daylighting Controls Source: BMG 85
84 Exterior Lighting 86
85 Exterior Lighting Controls C Exterior lighting designated for dusk to dawn operation Automatic photocell control Or; Automatic astronomical timer with a minimum 10-hour power back-up Other exterior lighting Automatic photocell control & timer Or; automatic astronomical timer with a minimum 10-hour power back-up Source: California Lighting Technology Center 87
86 Exterior Lighting Power C405.6 All Lamps Greater Than 100 Watts Must Have an Efficacy Rating of 60 Lumens per Watt or Greater Exterior Lighting Power Allowance is Calculated Utilizing Exterior Table Chart LPD Assigned by Area Zone & Type Exceptions for Sports, Industrial, Temporary Lighting, and other Specialized Lighting 88
87 Exterior Lighting Zones 1. Developed areas of national parks, state parks, forest land, and rural areas 2. Areas predominantly consisting of residential zoning, neighborhood business districts, light industrial with limited nighttime use and residential mixed use areas 3. All other areas 4. High-activity commercial districts in major metropolitan areas as designated by the local land use planning authority 89
88 Exterior Lighting Power C INDIVIDUAL LIGHTING POWER ALLOWANCES FOR BUILDING EXTERIORS (Partial) Tradable Surfaces (Lighting power densities for uncovered parking areas, building grounds, building entrances and exits, canopies and overhangs and outdoor sales areas may be traded.) Zone 1 Zone 2 Zone 3 Zone 4 Uncovered Parking Areas Parking areas and drives 0.04 W/ft W/ft W/ft W/ft 2 Walkways less than 10 feet wide Walkways 10 feet wide or greater, plaza areas special feature areas Stairways 0.7 W/linear foot 0.14 W/ft W/ft W/linear foot 0.14 W/ft W/ft W/linear foot 0.16 W/ft W/ft W/linear foot 0.2 W/ft W/ft 2 Pedestrian tunnels 0.15 W/ft W/ft W/ft W/ft 2 Building Entrances and Exits 20 W/linear foot 20 W/linear foot 30 W/linear foot 30 W/linear foot Main entries of door width of door width of door width of door width 20 W/linear foot 20 W/linear foot 20 W/linear foot 20 W/linear foot Other doors of door width of door width of door width of door width Entry canopies 0.25 W/ft W/ft W/ft W/ft 2 Free-standing and attached Building Grounds Sales Canopies 0.6 W/ft W/ft W/ft W/ft 2 Outdoor Sales Open areas (including vehicle sales lots) Street frontage for vehicle sales lots in addition to "open area" allowance 0.25 W/ft 2 No allowance 0.25 W/ft 2 10 W/linear foot 0.5 W/ft 2 10 W/linear foot 0.7 W/ft 2 30 W/linear foot 90
89 Exterior Lighting Power Non-tradable uses include: Building facades Automated teller machines and night depositories Entrances and gatehouse inspection stations at guarded facilities Loading areas for law enforcement, fire, ambulance, and other emergency vehicles Drive-up windows/doors Parking near 24-hour retail entrances 91
90 Exterior Lighting Exceptions 92
91 Review Daylighting and envelope requirements Exterior Lighting Lighting Power Lighting Controls Source: Daylighting Pattern Guide 93
92 System Commissioning 94
93 Lighting System Commissioning Automatic lighting controls functional testing: Hardware & Software Construction documents designate agent Code official may require 3rd party agent 95
94 Daylighting Control Commissioning Example Source: Energy Center of Wisconsin; Commissioning for Optimal Savings from Daylight Controls (2013) 96
95 Additional Efficiency Package Options: 1. Efficient HVAC 2. Efficient Lighting; LPA Table C * 3. On-Site Renewable Energy *About 10% lower LPA than base code 97
96 Lighting Options Package Table Interior Lighting Power allowances: Building Area Method Building Area Type LPD (w/ft2) Automotive facility 0.82 Convention Center 1.08 Courthouse 1.05 Dining: Bar lounge/leisure 0.99 Dining: Cafeteria/fast food 0.90 Table Interior Lighting Power allowances: Building Area Method cont. Building Area Type Motion Picture Theatre.83 LPD (w/ft2) Multifamily 0.60 Museum 1.06 Office 0.90/.85 Performing Arts Theatre 1.39 Dining: Family 0.89 Dormitory 0.61 Exercise Center 0.88 Fire Station 0.71 Gymnasium 1.0 Health Care Clinic 0.87 Hospital 1.10 Library 1.18 Manufacturing Facility 1.11 Hotel/Motel 0.88 Police Station.96 Post Office 0.87 Religious Building 1.05 Retail 1.4/1.3 School/University 0.99 Sports Arena.78 Town Hall 0.92 Transportation 0.77 Warehouse 0.6 Workshop
97 Electrical Systems Electrical Metering Dwelling Units Separate Meters Required on Each Dwelling Unit Unit One Unit Two 100
98 Compliance 101
99 Compliance Issues All Commercial Building Types Lighting Mandatory manual & automatic controls critical to energy savings Lighting Power Density (LPD) calculations often done incorrectly Daylit areas to be controlled separately Daylight/Skylight provisions in both envelope and electrical sections When COMcheck is used for compliance, fixture wattage and building or space area is often improperly entered 102
100 ASHRAE 90.1 Energy Cost Budget Method Energy cost budget method Compare a proposed design with code compliant design Demonstrate proposed design is at least as energy efficient as the code compliant design Approach Allows great flexibility but Requires considerable effort Still must meet all mandatory lighting, HVAC, and service water heating requirements 103
101 Commercial Energy Code Software COMcheck Compiles user inputs Calculates allowed envelope trade-offs Provides printable organized output Does not prove compliance Accuracy of inputs is key 104
102 Project Information- General 105
103 Documentation 106
104 Interior Lighting 107
105 Exterior Lighting 108
106 Limitations of COMcheck No trade-offs between envelope, HVAC and lighting systems Not performance based software Can only use for buildings up to 40% WWR if demonstrating compliance with the IECC 109
107 Electrical Key Points Both manual and automatic lighting control requirements Use rated lamp/ballast wattage to calculate LPD LPD approach for exterior lighting Daylit areas need to be controlled separately Lighting controls must be included in system commissioning 110
108 Recommended Compliance Procedure Obtain full project documentation Full set of plans and specifications including: Lighting schedule COMcheck or other code compliance calculations/documentation License numbers and/or other documentation of design professionals Review plans for code compliance There should be enough detail in project documents to verify code compliant design Compliance must follow MA Code or 90.1 Building Energy Cost Methodology & Mandatory prescriptive provisions of MA Code 111
109 Commercial Plan Review Best Practice Energy efficiency features that should be on the plans for the Lighting System Lighting fixture schedule with wattage and control narrative Location of daylight zones on floor plans Source: BMG 112
110 Commercial Inspection Best Practice Electrical substantial completion Fixture bulb and ballast type and quantity Lighting controls Electric meter for each dwelling unit. Source: BMG Source: BMG 113
111 Commercial Inspection Best Practice Final inspection All energy features that were not reviewed during other inspections Source: BMG 114
112 Lighting Project Example Sherwood Middle School Source: Gilbane Co. & CENTRIA Source: Gilbane Co. & CENTRIA 115
113 Lighting Project Example Sherwood Middle School Program challenges included providing lighting solutions for a large flex space and integrating daylighting into a variety of spaces Lighting Design Includes: LED and Dimmable fluorescent lighting Network lighting control with occupancy sensors and daylight harvesting High efficiency transformers 116
114 Lighting Project Example Sherwood Middle School Energy Code Allowable LPD 1.2 As-built Lighting Power Density 0.70 Annual kwh Savings (Lighting Only) 67,500 Lighting System Design 41% better than code MA-CHPS Certification 117
115 Resources Designlights Consortium Qualified Products List (QPL): Advanced Lighting Guidelines (ALGonline): Daylighting Pattern Guide: /home 118
116 Codes and Standards Initiative Sponsors 119
General Lighting Recommendations
General Lighting Recommendations DESIGN GUIDELINES FOR ENERGY EFFICIENT LIGHTING SYSTEMS According to the US Department of Energy, 51 percent of the energy used in commercial buildings is consumed by lighting
More informationMassachusetts Energy Code Technical Support Initiative. Commercial Energy Code Lighting & Electrical Provisions
Massachusetts Energy Code Technical Support Initiative Commercial Energy Code Lighting & Electrical Provisions Codes and Standards Initiative - Sponsors Who is Mass Save? Mass Save is an initiative sponsored
More information2009 IECC Commercial Lighting Requirements
BUILDING ENERGY CODES UNIVERSITY 2009 IECC Commercial Lighting Requirements Ken Baker ken@kenergy.us PNNL-SA-66170 Learning(Objec-ves(( ( 1. List(2(exemp-ons(to(mee-ng(ligh-ng(and(power( requirements.(
More informationTABLE Lighting Power Densities Using the Building Area Method
TABLE 9.5.1 Densities Using the Building Area Method Building Area a LPD (W/ft 2 ) Automotive facility 0.82 Convention center 1.08 Courthouse 1.05 Dining: bar lounge/leisure 0.99 Dining: cafeteria/fast
More informationApplying Energy Code to Existing Buildings
Applying Energy Code to Existing Buildings Massachusetts Energy Code Technical Support Program 1 Who Is Mass Save? Mass Save is an initiative sponsored by Massachusetts gas and electric utilities and energy
More informationNext Connecticut Energy Code
Connecticut Chapter Association of Energy Engineers Next Connecticut Energy Code 1 Next Connecticut State Building Code n 2012 International Building Code n 2012 International Existing Building Code n
More informationLighting Rebates 2018 Rebate Application
2018 Rebate Application Business Member Information Business Name Installation Address City, State, Zip Contact Name Email Phone Number Account Number P.O. Box 507 Brainerd, MN 56401 Wohlert@CWPower.com
More information2015 WSEC: Electrical and Lighting Systems
2015 WSEC: Electrical and Lighting Systems Presented by: Andrew Pultorak, LC, MIES Senior Energy Management Engineer, Puget Sound Energy January 19, 2017 Agenda Reading and Interpreting Code Section C406:
More informationEnergy Codes and Lighting: What You Need to Know ~ Current Codes and the future ~
Energy Codes and Lighting: What You Need to Know ~ Current Codes and the future ~ ERIC RICHMAN, LC, FIES U.S. Department of Energy - Building Energy Codes Program July 10, 2017 The Basis for Energy Code
More informationLighting Rebates Rebate Application
Rebate Application Coop Logo Here Business Member Information Business Name Installation Address City, State, Zip Contact Name Email Phone Number Account Number Rebate Recipient To release the rebate incentive
More informationComply with the Envelope Requirements Comply with the Mechanical/SWH Requirements Comply with the Power & Lighting Requirements Section 502 90.1 Section 5 Sections 503 and 504 90.1 Section 6 Section 505
More informationTitle 24: Where We're Headed with the 2013 Standards. Featuring: Martyn C. Dodd EnergySoft, LLC
Title 24: Where We're Headed with the 2013 Standards Featuring: Martyn C. Dodd EnergySoft, LLC www.energysoft.com Overall Changes in Scope and Application Welcome Overall Changes in Scope and Application
More informationLighting Rebates 2019 Rebate Application
2019 Rebate Application P.O. Box 507 Brainerd, MN 56401 Business Member Information Business Name Installation Address City, State, Zip Contact Name Email Phone Number Account Number Rebate Recipient To
More informationNONRESIDENTIAL LIGHTING Key Changes to mandatory and prescriptive lighting requirements in California s 2016 Building Energy Efficiency Standards
LIGHTING BEST PRACTICES WHAT S NEW IN THE 2016 CODE? NONRESIDENTIAL LIGHTING Key Changes to mandatory and prescriptive lighting requirements in California s 2016 Building Energy Efficiency Standards California's
More informationIECC 2015 with Hawaii Amendments COMMERCIAL DESIGN CHECKLIST
IECC 2015 with Hawaii Amendments COMMERCIAL DESIGN CHECKLIST ENVELOPE REQUIREMENTS Project: Date: Instructions RECOMMENDED: List performance values, note exceptions that were applied, or provide other
More informationEnergy Code Compliance:
Energy Code Compliance: Wood-Frame Buildings and the IECC Presented 4 March 2015 by Andrew Klein, P.E. Disclaimer: This presentation was developed by a third party and is not funded by WoodWorks or the
More informationTitle 24 Part 6 and Part 11 Building Code Triggers
Title 24 Part 6 and Part 11 Building Code Triggers Presented by: Moe Fakih Director, LEED AP, CCP, BPI Wayne Alldredge Assoc. Director, LEED AP, CBCP, CEM, CMVP Agenda Environmental Laws When is CALGreen
More informationIECC 2006 with Hawaii Amendments
IECC 2006 with Hawaii Amendments COMMERCIAL DESIGN CHECKLIST ENVELOPE REQUIREMENTS Instructions RECOMMENDED: List performance values, note exceptions that were applied, or provide other notes to the reviewer.
More informationRECOMMENDED LANGUAGE FOR THE STANDARDS DOCUMENT, ACM MANUALS,
RECOMMENDED LANGUAGE FOR THE STANDARDS DOCUMENT, ACM MANUALS, AND THE REFERENCE APPENDICES SECTION 131 INDOOR LIGHTING CONTROLS THAT SHALL BE INSTALLED (a) Area Controls. (b) Multi Level Lighting Controls.
More informationRhode Island Commercial Codes FAQs
Rhode Island Commercial Codes FAQs When does the new code go into effect? The new suite of building codes (including the new state energy conservation code, SBC-8) was adopted on July 1, 2013. A brief
More informationIncreased Energy Savings with Advanced Lighting and Controls RESNET Building Performance Conference February 27 th, 2013
Increased Energy Savings with Advanced Lighting and Controls 2013 RESNET Building Performance Conference February 27 th, 2013 Lighting Power Densities & Calculate Energy Savings in Multifamily Projects
More informationIECC 2006 with Hawaii Amendments
IECC 2006 with Hawaii Amendments COMMERCIAL PLAN REVIEW CHECKLIST ENVELOPE REQUIREMENTS Instructions This form is intended for use by energy code plan reviewers. Please see also a separate set of checklists
More informationCOMPLIANCE OVERVIEW. Module 2: Compliance Overview 4/6/2017 COMPLIANCE AND ENFORCEMENT
COMPLIANCE OVERVIEW 1. Compliance and enforcement 2. Permitting and certification 3. Compliance approaches 4. Required forms 5. New additions and major changes COMPLIANCE AND ENFORCEMENT Primary responsibility
More information2015 WSEC: Electrical and Lighting Systems
2015 WSEC: Electrical and Lighting Systems in collaboration with Presented by: Andrew Pultorak, LC, MIES Senior Energy Management Engineer Puget Sound Energy Agenda When Why What Where Who How 2 1 July
More informationPG&E Pacific Energy Center Provider Number: H663 Title 24 - Where We're Headed with the 2016 Nonresidential Standards - 16WS Martyn Dodd Aug 18, 2016
PG&E Pacific Energy Center Provider Number: H663 Title 24 - Where We're Headed with the 2016 Nonresidential Standards - 16WS Martyn Dodd Aug 18, 2016 Credit(s) earned on completion of this course will
More informationnew equipment & construction
Note: All fluorescent fixtures must have High formance or Reduced Wattage (HP/RW) lamps & ballast systems or a T5 lamp and ballast systems to be eligible for a fluorescent incentives. Facility lighting
More informationGeorgia Clean Energy Property Tax Credit Overview:
Georgia Clean Energy Property Tax Credit Overview: Successfully Proposing an GCEPTC Compliant Lighting Solution and Supporting Documents to Obtain a Tax Deduction SURVEY, AUDIT & DESIGN TEAM Walter P.
More informationCOMcheck Software Version Interior Lighting Compliance Certificate
COMcheck Software Version 4.0.6.0 Interior Lighting Compliance Certificate Project Information Energy Code: Project Type: 2012 IECC New Construction Construction Site: 224 First Ave Eaton, CO 80615 Additional
More informationm nlighting Compliance Documentation Page 1
m nlighting Compliance Documentation Page 1 Project Name: Lighting Sample renovation project (ASHRAE 90.1 2010) Project Address: 565 Sample St Date: Designer of Record: Email: Telephone: Contact Person:
More information2018 International Energy Conservation Code Updates
Providing effective energy strategies for buildings and communities 2018 International Energy Conservation Code Updates 10.25.2018 Who we are We assist buildings and communities in achieving energy efficiency,
More informationHighlights of What s New with the 2016 Nonresidential Energy Code
2016 Title 24, Part 6 Highlights of What s New with the 2016 Nonresidential Energy Code Gary Shushnar, SCE with compliments to: - Gina Rodda, Gabel Energy - Martyn Dodd, EnergySoft June 15, 2016 Statewide
More informationENERGY STAR Qualified Homes National Program Requirements, Version 3.0
Qualifying Homes The following homes are eligible to earn the ENERGY STAR: Single-family homes; Units in multi-family buildings that are three stories or less; Units in multi-family buildings that are
More information2019 Lighting Retrofit Rebate Instructions. City of Le Sueur
Rebate Instructions By participating in the We Save program, you can save energy and earn a rebate when you replace existing lighting with qualifying, energy-efficient lighting. What Rebate Can I Earn?
More information2019 Lighting Retrofit Rebate Instructions. City of Brownton
Rebate Instructions By participating in the We Save program, you can save energy and earn a rebate when you replace existing lighting with qualifying, energy-efficient lighting. What Rebate Can I Earn?
More informationOntario s Building Code
Ministry of Municipal Affairs and Housing ONTARIO ONLY Ontario s Building Code PROPOSED CHANGE TO THE 2006 BUILDING CODE CHANGE NUMBER E-SB-10-03-01 CODE REFERENCE Supplementary Standard SB-10 Chapter
More information2019 Lighting Retrofit Rebate Instructions. City of Winthrop
Rebate Instructions By participating in the We Save program, you can save energy and earn a rebate when you replace existing lighting with qualifying, energy-efficient lighting. What Rebate Can I Earn?
More informationRetail Effects of ANSI/ASHRAE/IES Standard
Retail Effects of ANSI/ASHRAE/IES Standard 90.1-2016 Prepared by Dialectic Inc. INTRODUCTION Background ANSI/ASHRAE/IES 90.1-2016 Energy Standard for Buildings Except Low-Rise Residential Buildings replaces
More informationChanges to the Minnesota Commercial Energy Code. Presented by: Andy Thielen, PE
Changes to the Minnesota Commercial Energy Code Presented by: Andy Thielen, PE Warning! The following is an outline of proposed code changes. There is no guarantee that the final code adopted by the State
More informationDayton Chapter February 9, Bob Thomson, P.E., LEED-AP, CDT
Dayton Chapter February 9, 2009 Bob Thomson, P.E., LEED-AP, CDT World Population is estimated to be 6,000,000,000 people U.S. Population is estimated to be 3,000,000 people U.S. makes up 5% of the world
More informationCommercial Codes FAQs: 2015 International Energy Conservation Code (IECC) with MA Amendments & MA Stretch Energy Code
Commercial Codes FAQs: 2015 International Energy Conservation Code (IECC) with MA Amendments & MA Stretch Energy Code GENERAL Q: When does/did the new code go into effect? A: In accordance with the Green
More informationEquipment Sizing: Manuals J & S
Equipment Sizing: Manuals J & S Massachusetts Energy Code Technical Support Program 1 Who Is Mass Save? Mass Save is an initiative sponsored by Massachusetts gas and electric utilities and energy efficiency
More informationMANDATORY MEASURES OUTDOOR LIGHTING CONTROLS. (Reference: Sub-Chapter 4, Section 130.2)
MANDATORY MEASURES CONTROLS (Reference: Sub-Chapter 4, Section 130.2) BACKLIGHT, UPLIGHT, AND GLARE (BUG) RATINGS The BUG system is used to evaluate luminaire performance in relation to lighting trespass,
More informationMANDATORY MEASURES OUTDOOR LIGHTING CONTROLS. (Reference: Sub-Chapter 4, Section 130.2)
MANDATORY MEASURES CONTROLS (Reference: Sub-Chapter 4, Section 130.2) PARKING GARAGES Parking garages are considered interior nonresidential spaces, except for the top level of a multi-tier garage. General
More informationEnergy Star Qualified - New Homes
PDHonline Course G226 (6 PDH) Energy Star Qualified - New Homes Instructor: Jeffrey Havelin, PE 2012 PDH Online PDH Center 5272 Meadow Estates Drive Fairfax, VA 22030-6658 Phone & Fax: 703-988-0088 www.pdhonline.org
More informationBy John Temple LC, IES, LEED GA
By John Temple LC, IES, LEED GA World energy consumption will increase by 53% between 2008 and 2035 with half of that increase attributed to China and India Renewables are the fastest-growing energy
More informationSUMMARY OF SERVICES & INCENTIVES
SMALL BUSINESS PROGRAM 2017 SUMMARY OF SERVICES & INCENTIVES Effective through December 31, 2017 Last updated February 1, 2017 EFFICIENCY INCENTIVES SUMMARY The Focus on Energy Small Business Program offers
More informationDEEMED SAVINGS TECHNICAL ASSUMPTIONS
Product: Description: Prescriptive rebates will be offered for replacement lighting equipment. New Construction rebates will be offered for new facilities or spaces overhauled for a new purpose. Custom
More informationPrescriptive Program. Terms And Conditions General Eligibility. Commercial and Industrial Customers. Rebate Checklist
Prescriptive Program Industrial Customers Rebate Checklist Get your rebate check faster by checking off these easy steps before mailing your application form. Incomplete applications may be delayed. q
More informationPRESCRIPTIVE APPROACH. 1. Actual and Allowed LPD 2. Complete Building Method 3. Area Category Method 4. Tailored Method
PRESCRIPTIVE APPROACH 1. Actual and Allowed LPD 2. Complete Building Method 3. Area Category Method 4. Tailored Method THE COMPLIANCE PROCESS There are two major steps to Title 24 compliance: 1. Meet all
More informationLight levels should be appropriate for the task and per the following guide in Part 1 - General.
DIVISION 16 - ELECTRICAL Section 16510 - Lighting Design Introduction Lighting utilizes approximately 40% of the electrical energy consumed here at the university. In order to conserve the energy it is
More informationDEEMED SAVINGS TECHNICAL ASSUMPTIONS
Product: Prescriptive rebates will be offered for replacement lighting equipment. New Construction rebates will be offered for new facilities or spaces overhauled for a new purpose. Custom rebates are
More informationAre You Ready for Solar-Ready? And Other Energy Code Updates Residential Massachusetts Energy Code Technical Support Program
Are You Ready for Solar-Ready? And Other Energy Code Updates Residential Massachusetts Energy Code Technical Support Program 1 Who Is Mass Save? Mass Save is an initiative sponsored by Massachusetts gas
More informationCOMcheck Software Version Envelope Compliance Certificate
COMcheck Software Version 3.9.4 Envelope Compliance Certificate 2009 IECC Section 1: Project Information Project Type: New Construction Project Title : AGORA PALMS APARTMENTS-BUILDING # 1 Construction
More information2018 APPENDIX B BUILDING CODE SUMMARY FOR ALL COMMERCIAL PROJECTS (EXCEPT 1 AND 2-FAMILY DWELLINGS AND TOWNHOUSES)
2018 APPENDIX B BUILDING CODE SUMMARY FOR ALL COMMERCIAL PROJECTS (EXCEPT 1 AND 2-FAMILY DWELLINGS AND TOWNHOUSES) (Reproduce the following data on the building plans sheet 1 or 2) Name of Project: Address:
More informationBusiness Energy Rebates Application
Business Energy Rebates Application Business Energy Rebates make it easy and affordable for you to select energy efficient products for your business. and mail-in rebates are available for energy efficient
More informationADMINISTRATION CHAPTER 1
CHAPTER 1 ADMINISTRATION PART 1 SCOPE AND APPLICATION SECTION 101 SCOPE AND GENERAL REQUIREMENTS 101.1 Title. This code shall be known as the Florida Building Code, Energy Conservation, and shall be cited
More informationEnergy Code Compliance It s the Law
Energy Code Compliance It s the Law Evan Hallas & Yossi Bronsnick Multifamily Performance Program Partner Summit October 24, 2011 Taitem Engineering Taitem Engineering, PC, is a consulting engineering
More informationLIGHTING TECHNICAL SHEET
GENERAL INFORMATION LIGHTING TECHNICAL SHEET SMECO's Business Solutions program is designed to help commercial and industrial customers maximize energy efficiency and manage energy costs. With cost-saving
More informationhow to read an energy model
how to read an energy model Kohler Ronan, LLC is a Registered Provider with The American Institute of Architects Continuing Education Systems. Credit earned on completion of this program will be reported
More informationIECC Commercial Significant Changes Summary Tier I
2009-2015 IECC Commercial Significant Changes Summary Tier I The first change is in the layout of the book. Instead of having Chapters 1-3 that applied to all projects and then having Chapter 4 Residential
More informationLATEST UPDATES TO TITLE 24 & TITLE 20 AUGUST 2017
LATEST UPDATES TO TITLE 24 & TITLE 20 AUGUST 2017 IMPACTS OF LATEST UPDATES TO TITLE 24 & TITLE 20 Presented by: Chris Primous - VP of National Accts and Industry Relations, MaxLite California Title 24
More informationPresentation to Appalachian State University
Presentation to Appalachian State University Boone, NC NC Commercial Energy Code Overview Renee Hutcheson, AIA, LEED AP, PEM Reid Conway, PEM North Carolina State Energy Office Department of Commerce January
More informationLighting controls, coupled with
Lighting controls: Best practices begins with a strategy ASHRAE Standard 90.1 requires lighting professionals to include power allowances, daylighting controls, functional testing, and submittals in their
More informationBuilding Department Informational Handout. Residential Window Replacement Requirements
City of Sonoma Building Department Informational Handout Residential Window Replacement Requirements Handout No: 28 Revised: 6/8/18 These requirements apply to the replacement of existing windows in residential
More information2019 Lighting New Construction Rebate Instructions. City of Le Sueur
Rebate Instructions By participating in the We Save program, you can save energy and earn a rebate when you purchase and install qualifying lighting in a new building or an addition to, or major renovation
More informationSeptember 21, 2016 LED Update: Benefits, Incentives, Action Plan, Case Studies. Ed Evans LEDVANCE SYLVANIA
September 21, 2016 LED Update: Benefits, Incentives, Action Plan, Case Studies Ed Evans LEDVANCE SYLVANIA Agenda The Current LED market New LED technology for Commercial facilities New LED RETROFIT program
More informationBUILDING LIGHTING Modeling Requirements Appendix G. 1 Exceeding Standard ASHRAE Learning Institute
BUILDING LIGHTING Modeling Requirements 90.1-2007 Appendix G 1 Exceeding Standard 90.1-2007 2003-2008 ASHRAE Learning Institute Appendix G: Modeling Requirements Lighting - Proposed Design Lighting System
More informationManitoba Energy Code for Buildings 2011 Part 4: Lighting
Manitoba Energy Code for Buildings 2011 Part 4: Lighting Ian Naften, MIES, EIT Electrical Systems Engineer, Manitoba Hydro Education Chair, Illuminating Engineering Society of Manitoba September 17, 2014
More information2019 Lighting New Construction Rebate Instructions. City of Winthrop
Rebate Instructions By participating in the We Save program, you can save energy and earn a rebate when you purchase and install qualifying lighting in a new building or an addition to, or major renovation
More informationNC ECC Commercial Training June 2011
Mathis Consulting Company North Carolina Energy Conservation Code: Commercial Prescriptive Provisions Mathis Consulting Company Building Solutions Chris Mathis 100+ Years of Experience as Building Scientists,
More information2019 Lighting New Construction Rebate Instructions. City of Olivia
Rebate Instructions By participating in the We Save program, you can save energy and earn a rebate when you purchase and install qualifying lighting in a new building or an addition to, or major renovation
More informationTaking Advantage of the New York City Lighting Upgrade Mandate
Taking Advantage of the New York City Lighting Upgrade Mandate 17 April, 2012 1 Our members: Lighting manufacturers united through the National Electrical Manufacturers Association (NEMA) Our focus: Informing
More information2018 APPENDIX B BUILDING CODE SUMMARY FOR ALL COMMERCIAL PROJECTS (EXCEPT 1 AND 2-FAMILY DWELLINGS AND TOWNHOUSES)
2018 APPENDIX B BUILDING CODE SUMMARY FOR ALL COMMERCIAL PROJECTS (EXCEPT 1 AND 2-FAMILY DWELLINGS AND TOWNHOUSES) (Reproduce the following data on the building plans sheet 1 or 2) Name of Project: Address:
More informationMANDATORY MEASURES OUTDOOR LIGHTING CONTROLS. (Reference: Sub-Chapter 4, Section 130.2)
MANDATORY MEASURES CONTROLS (Reference: Sub-Chapter 4, Section 130.2) Additions and Alterations Over 50% replaced Mandatory Controls 130.0, 130.2, 130.4 + Prescriptive Requirements LPD allowances of 140.7
More information2010 CA Higher Education Sustainability Conference
2010 CA Higher Education Sustainability Conference Energy Efficiency Partnership Program Best Practice Awards Application Project Category 11 Rendering Used Courtesy of Cannon Design I. Contact Information
More informationName of Project: Address: Zip Code Owner/Authorized Agent: Phone # ( ) - Owned By: Select one Code Enforcement Jurisdiction: Select one
2018 APPENDIX B BUILDING CODE SUMMARY FOR ALL COMMERCIAL PROJECTS (EXCEPT 1 AND 2-FAMILY DWELLINGS AND TOWNHOUSES) (Reproduce the following data on the building plans sheet 1 or 2) Name of Project: Address:
More informationName of Project: Address: Zip Code Owner/Authorized Agent: Phone # ( ) - Owned By: Select one Code Enforcement Jurisdiction: Select one
2018 APPENDIX B BUILDING CODE SUMMARY FOR ALL COMMERCIAL PROJECTS (EXCEPT 1 AND 2-FAMILY DWELLINGS AND TOWNHOUSES) (Reproduce the following data on the building plans sheet 1 or 2) Name of Project: Address:
More information2019 Lighting New Construction Rebate Instructions. City of Brownton
City of Brownton Rebate Instructions By participating in the We Save program, you can save energy and earn a rebate when you purchase and install qualifying lighting in a new building or an addition to,
More information2019 Lighting New Construction Rebate Instructions. City of Buffalo
Rebate Instructions By participating in the We Save program, you can save energy and earn a rebate when you purchase and install qualifying lighting in a new building or an addition to, or major renovation
More informationLight levels should be appropriate for the task and per the following guide in Part 1 - General.
DIVISION 16 - ELECTRICAL Section 16510 - Lighting Design Introduction Lighting utilizes approximately 40% of the electrical energy consumed here at the university. In order to conserve the energy it is
More informationDEEMED SAVINGS TECHNICAL ASSUMPTIONS
Product: Description: Prescriptive rebates will be offered for replacement lighting equipment. New Construction rebates will be offered for new facilities or spaces overhauled for a new purpose. Custom
More informationa19f acrylic pattern 19 IC rating standard on all models Acrylic Pattern " frosted refractor offers a high-end aesthetic. Four lumen packages
LLT A full family of sustainable recessed lighting products using high performance frosted lenses for attractive interior lighting. all the right choices FS flush steel Flush steel door frame is standard
More informationThis presentation provides: An overview of the 2013 version of Green Globes plus Compliance details on the lighting related provisions this
This presentation provides: An overview of the 2013 version of Green Globes plus Compliance details on the lighting related provisions this sustainability standard 1 This presentation is protected. 2 This
More informationCommissioning Lighting Control Systems
AABC Commissioning Group AIA Provider Number 50111116 Commissioning Lighting Control Systems Course Number: CXENERGY1727 Jesse Felter, SSRCx Tom Divine, P.E., SSR April 27, 2017 Credit(s) earned on completion
More informationExample LEED-NC v2.1 Energy & Atmosphere Credit 1 Submittal
Example LEED-NC v2.1 Energy & Atmosphere Credit 1 Submittal The following documentation provides an example submittal for the LEED-NC v2.1 Energy & Atmosphere Credit 1 (EAc1). This sample EAc1 submittal
More informationType of Business: Office Restaurant Retail Government Grocery Other Health Lodging School Church Industrial Multifamily Facility Size (ft 2 )
2016 Business Lighting Application LIMITED FUNDING: Before purchasing your equipment, contact your local utility for rebate availability. CUSTOMER INFORMATION Location Name Company Name Tax ID Website
More informationE3T Energy. Task/Vertical/Ambient Lighting. Emerging Technologies Showcase
1 Task/Vertical/Ambient Lighting Showcase September 18, 2013 Presenters: Jerry Mix Finelite, Inc Kelly Cunningham California Lighting Technology Center Welcome. Today s webinar is being recorded and will
More informationConnected: How Networked Control Systems (and codes and standards!) Will Drive LED Adoption
Connected: How Networked Control Systems (and codes and standards!) Will Drive LED Adoption Kelly Cunningham, Outreach Director kcunning@ucdavis.edu California Lighting Technology Center University of
More informationLEAD DESIGN PROFESSIONAL:
2009 APPENDIX B BUILDING CODE SUMMARY FOR ALL COMMERCIAL PROJECTS (EXCEPT 1 AND 2-FAMILY DWELLINGS AND TOWNHOUSES) (Reproduce the following data on the building plans sheet 1 or 2) Name of Project: Address:
More informationApplying the Building Code During Design
Applying the Building Code During Design A Step-By-Step Process AIA Learning Units The Salt Lake City CSI Chapter is a Registered Provider with The American Institute of Architects Continuing Education
More information2017 Michigan Energy Code Changes Overview-Commercial Michigan Energy Code Training and Implementation Program
2017 Michigan Energy Code Changes Overview-Commercial Michigan Energy Code Training and Implementation Program CP-17-00111 1.0 Hour Commercial Program Course Number CP-17-00111 CP-17-00111 Presenters Michigan
More information2009 IECC Chapter 1 Additions, alterations, renovations or repairs.
2009 IECC Chapter 1 Additions, alterations, renovations or repairs. Additions, alterations, renovations or repairs to an existing building, building system or portion thereof shall conform to the provisions
More informationEnergy Codes: Mark A. Gelfo, PE. LEED AP BD+C, LEED AP O+M, CxA, EMP
Quality Lighting Design and Energy Codes: We Can Have Both Mark A. Gelfo, PE LEED AP BD+C, LEED AP O+M, CxA, EMP TLC Engineering i for Architecture t Learning Objectives 1. Understand the lighting requirements
More informationAre You Ready for Solar-Ready? And Other Energy Code Updates (Residential)
Are You Ready for Solar-Ready? And Other Energy Code Updates (Residential) January 18, 2018 Massachusetts Energy Code Technical Support Program 1 Who Is Mass Save? Mass Save is an initiative sponsored
More informationDesigning Beyond Code For Energy Efficiency
Designing For Energy Efficiency Jean Ascoli, Architect, CEM, Program Director for New Construction Smart Energy Design Assistance Center University of Illinois, Urbana Champaign History 2004 Public Act
More information2011 California Building Energy Efficiency Standards
Requirements for Controllable Lighting 2011 California Building Energy Efficiency Standards Southern California Edison Doug Avery, Project Manager James Benya, PE, Michael Neils, PE, and Francis Rubinstein,
More informationThe baseline building system for compliance with Senate Bill 668 is defined by Appendix G,
Project: North Carolina A&T State University New Student Health Center SCO #: 08-08109-01A 1.0 Heating, Ventilating and Air Conditioning (HVAC) Baseline Building Systems Senate Bill 668 Compliance The
More informationINSIDE RESCheck / COMCheck
INSIDE RESCheck / COMCheck What You Need to Know About UA NEBOEA October 2014 Don Vigneau, AIA Emeritus - Presenter IECC Compliance - Four Options Prescriptive R-Value and U-Factor R-values Table R402.1.1
More informationMANDATORY MEASURES OUTDOOR LIGHTING CONTROLS. (Reference: Sub-Chapter 4, Section 130.2)
MANDATORY MEASURES CONTROLS (Reference: Sub-Chapter 4, Section 130.2) Additions and Alterations Over 50% replaced Mandatory Controls 130.0, 130.2, 130.4 + Prescriptive Requirements LPD allowances of 140.7
More information