NEWS ISO STANDARDS: 2019/02
|
|
|
- Rose Ray
- 5 years ago
- Views:
Transcription
1 NEWS ISO STANDARDS: 2019/02 ISO/TS ISO/TS Plastics - Instrumented micro-indentation test for hardness measurement ISO/TR 20118: ISO/TR Plastics - Guidance on fire characteristics and fire performance of PVC materials used in building applications ISO/FDIS ISO/FDIS Surface chemical analysis - Scanning-probe microscopy - Determination of geometric quantities using SPM: Calibration of measuring systems ISO/PRF TR 20693: ISO/PRF TR Statistical methods for implementation of Six Sigma - Selected illustrations of distribution identification studies ISO/PRF TS ISO/PRF TS Photography - Lenticular print for changing images - Measurements of image quality ISO/TR ISO/TR Heat recovery ventilators and energy recovery ventilators - Method of test for performance - Part 2: Assessment of measurement uncertainty of performance parameters ISO/FDIS ISO/FDIS 305 Plastics - Determination of thermal stability of poly(vinyl chloride), related chlorine-containing homopolymers and copolymers and their compounds - Discoloration method ISO/FDIS ISO/FDIS 4574 Plastics - PVC resins for general use - Determination of hot plasticizer absorption
2 ISO/TS ISO/TS Water quality - Detection and quantification of Legionella spp. and/or Legionella pneumophila by concentration and genic amplification by quantitative polymerase chain reaction (qpcr) ISO/TR ISO/TR Nanotechnologies - Considerations for the measurement of nano-objects and their aggregates and agglomerates (NOAA) in environmental matrices ISO/TS : ISO/TS Health Informatics - Categorial structures for representation of acupuncture - Part 5: Cupping ISO/TR 8713: ISO/TR 8713 Electrically propelled road vehicles - Vocabulary ISO/TS ISO/TS Road vehicles - Ergonomic aspects of transport information and control systems - Calibration tasks for methods which assess driver demand due to the use of in-vehicle systems ISO/TR : ISO/TR Robotics - Application of ISO Part 2: Application guidelines ISO/IEC DIS ISO/IEC DIS Information Technology - Data Centres - Server Energy Effectiveness Metric ISO/IEC DIS ISO/IEC DIS Information technology - Extensible biometric data interchange formats - Part 4: Finger image data ISO/IEC DIS ISO/IEC DIS Information technology - Extensible biometric data interchange formats - Part 5: Face image data
3 ISO/TR 21965: ISO/TR Information and documentation - Records management in enterprise architecture ISO/TR : ISO/TR Intelligent transport systems (ITS) - Network based precise positioning infrastructure for land transportation - Part 1: General information and use case definitions IEC/DIS IEC/DIS Workplace atmospheres - Part 2: Gas detectors - Selection, installation, use and maintenance of detectors for toxic gases and vapours and oxygen ISO/IEC DIS ISO/IEC DIS Conformity assessment - Vocabulary and general principles ISO/IEC DIS ISO/IEC DIS Information technology - Document Schema Definition Languages (DSDL) - Part 7: Character Repertoire Description Language (CREPDL) ISO/TS : ISO/TS Respiratory protective devices - Human factors - Part 3: Physiological responses and limitations of oxygen and limitations of carbon dioxide in the breathing environment ISO/TS ISO/TS Respiratory protective devices - Human factors - Part 4: Work of breathing and breathing resistance: Physiologically based limits ISO/IEC TS : ISO/IEC TS Conformity assessment - Requirements for bodies providing audit and certification of management systems - Part 8: Competence requirements for auditing and certification of management systems for sustainable development in communities
4 ISO/IEC DIS ISO/IEC DIS Information technology - Cloud Computing - Taxonomy based data handling for cloud services ISO/PRF TS ISO/PRF TS Intelligent transport systems - Cooperative ITS - Using V2I and I2V communications for applications related to signalized intersections ISO/IEC TR 23050: ISO/IEC TR Information technology - Data centres - Impact on data centre resource metrics of electrical energy storage and export ISO/IEC DIS ISO/IEC DIS Information technology - Low-latency lightweight image coding system - Part 4: Conformance testing ISO/ASTM FDIS ISO/ASTM FDIS Additive manufacturing - Process characteristics and performance - Practice for metal powder bed fusion process to meet critical applications ISO : 2016/DAmd ISO ISO/TS 54001: ISO/TS Quality management systems - Particular requirements for the application of ISO 9001:2015 for electoral organizations at all levels of government ISO/IEC DIS ISO/IEC DIS Information technology - MPEG systems technologies - Part 15: Carriage of web resource in ISOBMFF ISO : 2018/DAmd ISO Flying toys ISO 7001: 2007/DAmd ISO 7001 PI CF 022: Laundry service
5 ISO 7001: 2007/DAmd ISO 7001 PI PF 082: Recycling - Plastics ISO 7001: 2007/DAmd ISO 7001 PI TF 044 Electric vehicle charging station ISO 24157: 2008/DAmd ISO ISO 8596: 2017/DAmd ISO 8596 ISO/FDIS ISO/FDIS Measurement of radioactivity in the environment - Air: Radon Part 9: Test methods for exhalation rate of building materials ISO : 2017/DAmd ISO Test result validity process is to be moved into a separate reporting limit instruction. ISO/IEC : ISO/IEC Information technology - MPEG systems technologies - Part 11: Energy-efficient media consumption (green metadata) ISO : 2017/DAmd ISO Correction of several errors in terms of internal references, mistakes in formulas and in sheets ISO 6246: 2017/DAmd ISO 6246 Change the purity requirement for n-heptane ISO/IEC DIS ISO/IEC DIS Software and systems engineering - Capabilities of software safety and security verification tools
6 ISO/IEC /DAmd ISO/IEC /DAmd 1 Carriage of associated CMAF boxes for audio-visual elementary streams and JPEG XS in MPEG-2 TS ISO/IEC/IEEE FDIS CM ISO/IEC/IEEE FDIS CM Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 1CM: Time-sensitive networking for fronthaul ISO/IEC : 2013/DAmd ISO/IEC ISO 6614: 1994/DAmd ISO 6614 ISO 9120: 1997/DAmd ISO 9120 ISO/FDIS ISO/FDIS 4701 Iron ores and direct reduced iron - Determination of size distribution by sieving ISO/IEC : 2017/DAmd ISO/IEC General updates ISO/IEC : 2017/DAmd ISO/IEC General updates ISO/IEC : 2017/DAmd ISO/IEC General updates ISO/IEC : 2017/DAmd ISO/IEC General updates ISO/IEC : 2017/DAmd ISO/IEC General updates
7 ISO/IEC : 2017/DAmd ISO/IEC General updates ISO/IEC : 2017/DAmd ISO/IEC General updates ISO/IEC : 2017/DAmd ISO/IEC General updates ISO/IEC : 2017/DAmd ISO/IEC General updates ISO : 2018/DAmd ISO ISO : 2018/DAmd ISO ISO/FDIS ISO/FDIS Plain bearings - Metallic multilayer plain bearings - Part 1: Non-destructive ultrasonic testing of bond of thickness greater than or equal to 0,5 mm ISO/FDIS ISO/FDIS Plain bearings - Metallic multilayer plain bearings - Part 2: Destructive testing of bond for bearing metal layer thicknesses greater than or equal to 2 mm ISO/FDIS ISO/FDIS Plain bearings - Appearance and characterization of damage to metallic hydrodynamic bearings - Part 2: Cavitation erosion and its countermeasures ISO/FDIS ISO/FDIS Plain bearings - Appearance and characterization of damage to metallic hydrodynamic bearings - Part 1: General
8 ISO/FDIS ISO/FDIS Plastics - Determination of the total luminous transmittance of transparent materials - Part 1: Single-beam instrument ISO/FDIS ISO/FDIS Plain bearings - Bearing fatigue - Part 3: Test on plain strips of a metallic multilayer bearing material ISO : 2017/DAmd ISO Sample preparation for raw marine gastropods ISO/FDIS ISO/FDIS 9514 Paints and varnishes - Determination of the pot life of multicomponent coating systems - Preparation and conditioning of samples and guidelines for testing ISO : 2011/DAmd ISO ISO : 2016/DAmd ISO ISO/FDIS ISO/FDIS Microstructure of cast irons - Part 1: Graphite classification by visual analysis ISO/IEC DIS ISO/IEC DIS Information technology - Fibre channel - Part 226: Single-byte command code sets mapping protocol - 6 (FC-SB-6) ISO/IEC DIS ISO/IEC DIS Information technology - Fibre channel - Part 246: Backbone - 6 (FC-BB-6) ISO 7010: 2011/DAmd ISO 7010 Safety sign P045 : No campfires
9 ISO 7010: 2011/DAmd ISO 7010 Safety sign W069 : Warning; Jellyfish ISO 7010: 2011/DAmd ISO 7010 Safety sign W070 : Warning; Step down ISO 7010: 2011/DAmd ISO 7010 Safety sign P071 : Do not cross barrier ISO 7010: 2011/DAmd ISO 7010 Safety sign P072 : No jumping down ISO 7010: 2011/DAmd ISO 7010 Safety sign W068 : Warning; Falling into water when stepping on or off a floating surface ISO/IEC : 2018/DAmd ISO/IEC HEVC Media Profiles update, new CMAF Structural Brand and other improvements ISO/IEC /DAmd ISO/IEC /DAmd 3 Corrected audio handling IEC/FDIS IEC/FDIS Medical electrical equipment - Part 2-26: Particular requirements for the basic safety and essential performance of electroencephalographs ISO/IEC DIS ISO/IEC DIS Information technology - Power efficiency measurement specification v3.0.3 ISO/IEC DIS ISO/IEC DIS Information technology - Security techniques - Guidelines for information security management systems auditing ISO/IEC : 2015/DAmd ISO/IEC Clarification of the upsampling process
10 ISO/IEC : 2016/DAmd ISO/IEC Clarification of the upsampling process
PROGETTI DI NORMA ISO IN INCHIESTA
PROGETTI DI NORMA ISO IN INCHIESTA Allegato al n. 7 di UNInotizie del 15 aprile 2013 PROGETTI ISO AL VOTO PRELIMINARE I progetti ISO in inchiesta pubblica possono essere acquistati contattando l Ufficio
ISO SERIES and Other Relevant Standards Last updated 17 May 2018
Environmental Management Systems AS/NZS ISO 14001:2015 Environmental management systems Requirements with guidance for use. AS/NZS ISO 14004:2016 ISO 14005:2010 (under review) BS 8555:2016 ISO 14006:2011
ISO : 2010 Design of graphical symbols for use in the technical documentation of products Part 1: Basic rules G
International Standards in process An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a
NEWS ISO STANDARDS: 2014/04
NEWS ISO STANDARDS: 2014/04 ISO 9377-2: 2000 107.80 ISO 9377-2 Water quality -- Determination of hydrocarbon oil index -- Part 2: Method using solvent extraction and gas chromatography ISO/IEC 25063: 2014
LIST OF PUBLISHED STANDARDS
Report : 08-0-6 Of 6 Total Count: 8 SABS/TC 004 50-:005/ISO -:000 Rolling - Tolerances Part : Terms 005-0-04 and definitions 0-07-9 50-:005/ISO -:00 5:007/ISO 76:006 Rolling - Tolerances Part : Measuring
NEWS ISO STANDARDS: 2016/10
NEWS ISO STANDARDS: 2016/10 ISO/IEC 9995-9: 2016 239.00 ISO/IEC 9995-9 Information technology -- Keyboard layouts for text and office systems -- Part 9: Multi-lingual, multiscript keyboard layouts ISO
NEWS ISO STANDARDS: 2017/01
NEWS ISO STANDARDS: 2017/01 ISO/IEC 26557: 2016 214.00 ISO/IEC 26557 Software and systems engineering -- Methods and tools for variability mechanisms in software and systems product line ISO 13775-2: 2016
Work Plan ( )
\\\\\\ Work Plan (-2019) Secretariat of ISO/TMB / ATMG ISO/TMB/ATMG Arabic Translation Management Group (ATMG) Work Plan (-2019) Page 1 of 16 Table of Contents S. N Description Page 1 Objectives 3 2 Translation
Nr. Standard reference Title
Nr. Standard reference Title 1 ISO/IEC 23008-3:2015/Amd 2:2016 Information technology - High efficiency coding and media delivery in heterogeneous environments - Part 3: 3D audio - Amendment 2: MPEG-H
Rolling bearings Sleeve type linear ball bearings Boundary dimensions and tolerances Amendment 1. ISO 6929:2013 * Steel products Vocabulary R
Standards published ew International Standards published between 01 ovember and 30 ovember 2013 Available in English only French version of standard previously published in English only Price group TC
Optics and photonics - Specifications for binoculars, monoculars and spotting scopes - Part 1: General purpose instruments 15 ISO :2016
Nr. Standard reference English title 1 ISO/IEC 1465 Information technology - International string ordering and comparison - Method for comparing character strings and description of the common template
Information technology - Database languages - SQL Technical Reports - Part 7: Polymorphic table functions in SQL 7 ISO/IEC :2017
Nr. Standard reference Title 1 ISO/IEC/IEEE 8802-3:2017 Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements
IUCLID 5 COMPOSITION AND ANALYSIS GUIDANCE DOCUMENT:
IUCLID 5 COMPOSITION AND ANALYSIS GUIDANCE DOCUMENT: IRON [EINECS NUMBER 231-096-4, CAS NUMBER 7439-89-6] including IRON, FURNACE [EINECS NUMBER 265-998-4 CAS NUMBER 65996-67-0] INTRODUCTION Each REACH
Rolling bearings Cast and pressed housings for insert bearings Boundary dimensions and tolerances
Standards published New International Standards published between 01 January and 31 January 2013 * Available in English only ** French version of standard previously published in English only Price group
EXPRESSION OF INTEREST (EOI) FOR. Mechanical Works
EXPRESSION OF INTEREST (EOI) FOR Mechanical Works KWtE-03-PR-EO-ACC-0 Rev01 15 Version: Date: Prepared by: Approved: 01 7/11/18 VMC AMN Page 1 OF 6 1 Project overview ACCIONA s Engineering, Procuring &
Standard reference Title
Standard reference Title 1 ISO/IEC 23006- Information technology -- Multimedia service platform technologies -- Part 1: Architecture 2 ISO 2100 Educational organizations -- Management systems for educational
This document is a preview generated by EVS
TECHNICAL SPECIFICATION ISO/TS 11937 First edition 2012-12-15 Nanotechnologies Nanoscale titanium dioxide in powder form Characteristics and measurement Nanotechnologies Dioxyde de titane à la nano-échelle
Polymers Performance Overview. Bruce Duncan. Wednesday 18 th April 2007
Polymers Performance Overview Bruce Duncan Wednesday 18 th April 27 Measurements for Materials Performance 24-27 Scope and Aims: The Performance of Materials programme will develop measurement methodologies
CEN/TC 88 - Thermal insulating materials and products
C/TC 88 - Thermal insulating materials and Standard reference CR 245:1986 822:1994 823:1994 824:1994 825:1994 826:1996 1602:1996 1602:1996/AC: 1603:1996 1603:1996/A1: 1603:1996/AC: 1604:1996 1604:1996/A1:
GENERAL GUIDELINES FOR THE ACCREDITATION OF FOOD AND ENVIRONMENTAL MICROBIOLOGICAL LABORATORIES
GENERAL GUIDELINES FOR THE ACCREDITATION OF FOOD AND ENVIRONMENTAL MICROBIOLOGICAL LABORATORIES ESYD G-MICROBIOL/01/02/20-10-2016 1/12 ESYD G-MICROBIOL Issue: 01 Revision: 02 Issue Date: 20-06-2007 Revision
International Standards in process
International Standards in process An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a
Rolling bearings Tapered roller bearings Boundary dimensions and series designations Amendment 1
Standards published New International Standards published between 01 January and 31 January 2012 * Available in English only ** French version of standard previously published in English only Price group
This document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 16831 First edition 2012-04-01 Non-destructive testing Ultrasonic testing Characterization and verification of ultrasonic thickness measuring equipment Essais non destructifs
4 ISO/IEC :2016 Information technology - Biometric sample quality - Part 1: Framework
Nr. Standard reference Title 1 ISO/IEC 15149-3:2016 between systems - Magnetic field area network (MFAN) - Part 3: Relay Protocol for Extended Range 2 ISO/IEC 15149-4:2016 between systems - Magnetic field
CO2 transmitters. Introduction 44. CO 2 transmitters 45. CO 2 and temperature transmitters 46. CO 2 transmitters for special applications 47-48
Introduction 44 CO 2 transmitters 45 CO 2 and temperature transmitters 46 CO 2 transmitters for special applications 47-48 43 Fundamentals of CO2 Carbon dioxide (CO2) is a colorless and odorless gas that
9 ISO/TS 21522:2017 Rubber process fumes components - Quantitative test methods
Nr. Standard reference Title 1 ISO/IEC 19944:2017 Information technology - Cloud computing - Cloud services and devices: Data flow, data categories and data use 2 ISO 20053:2017 Ships and marine technology
Tenth International Conference On Flow Dynamic November , 2013 Institute of Fluid Science, Tohoku University, Sendai
Tenth International Conference On Flow Dynamic November 25. 27, 2013 Institute of Fluid Science, Tohoku University, Sendai NDT-Innovations In The Automotive Industrial Sector And To Light-Weight Materials
ISO 2808 INTERNATIONAL STANDARD. Paints and varnishes Determination of film thickness. Peintures et vernis Détermination de l'épaisseur du feuil
INTERNATIONAL STANDARD ISO 2808 Fourth edition 2007-02-01 Paints and varnishes Determination of film thickness Peintures et vernis Détermination de l'épaisseur du feuil Reference number ISO 2808:2007(E)
Recycled Content Materials Assessment Methodology
Recycled Content Materials Assessment Methodology Last Revision: May 2017 Written in collaboration with MBDC, LLC Copyright 2017 Cradle to Cradle Products Innovation Institute No part of this publication
Development of National Nanotechnology Standards for Safe Consumer Products
Development of National Nanotechnology Standards for Safe Consumer Products Agus Haryono Research Center for Chemistry Indonesian Institute of Sciences (LIPI) International Conference on Nanotechnology
ISO INTERNATIONAL STANDARD
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 16831 First edition 2012-04-01 Non-destructive testing Ultrasonic testing Characterization and verification of ultrasonic thickness measuring equipment
International Standards in process
International Standards in process An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a
Reference materials Contents of certificates and accompanying documentation
International Standards in process An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a
Quick Guide: Independent Verification in TCO Certified
Quick Guide: Independent Verification in TCO Certified TCO Certified is an international sustainability certification for IT products, making it easier for IT buyers, brand owners and manufacturers to
Plain bearings Metallic multilayer plain bearings. Part 1: Non-destructive ultrasonic testing of bond of thickness greater than or equal to 0,5 mm
INTERNATIONAL STANDARD ISO 4386-1 Third edition 2012-10-15 Plain bearings Metallic multilayer plain bearings Part 1: Non-destructive ultrasonic testing of bond of thickness greater than or equal to 0,5
EXPERIMENTAL INVESTIGATION ON MECHANICAL PROPERTIES OF POLYPROPYLENE FIBRE INCORPORATED CONCRETE WITH SILICA FUME
International Journal of Civil Engineering and Technology (IJCIET) Volume 7, Issue 5, September-October 2016, pp. 09 16, Article ID: IJCIET_07_05_002 Available online at http://www.iaeme.com/ijciet/issues.asp?jtype=ijciet&vtype=7&itype=5
DATASHEET INFOSHEET CEPRO PVC WELDING CURTAIN CEPRO ORANGE-CE DIN CERTIFICATE. Technical Specifications 1/1
CEPRO ORANGE-CE DIN CERTIFICATE Commercial 1/1 Certification 1/4 Safety 1/2 CEPRO GREEN-9 DIN CERTIFICATE Commercial 1/1 Certification 2/4 Safety 1/2 CEPRO GREEN-6 DIN CERTIFICATE Commercial 1/1 Certification
Paper and board Determination of fracture toughness Constant rate of elongation method (1,7 mm/s)
International Standards in process An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a
ISO 3030:2011 Rolling bearings Radial needle roller and cage assemblies Boundary dimensions and tolerances E
Standards published New International Standards published between 01 September and 30 September 2011 * Available in English only ** French version of standard previously published in English only Price
ISO Personal protective equipment Test methods for footwear. Équipement de protection individuelle Méthodes d essais pour les chaussures
INTERNATIONAL STANDARD ISO 20344 Second edition 2011-12-01 Personal protective equipment Test methods for footwear Équipement de protection individuelle Méthodes d essais pour les chaussures Reference
Conformity assessment and ISO CASCO for standards writers
Conformity assessment and ISO CASCO for standards writers Content What is conformity assessment? What is ISO/CASCO? What is the ISO/CASCO Toolbox? ISO/IEC Directives, Part 2, Clause 6.7 What is conformity
Give one problem caused by non-biodegradable polymers. Figure 1. PVC is produced from a monomer that contains two carbon atoms.
1 This question is about polymers. The polymer polyvinyl chloride (PVC) is non-biodegradable. Give one problem caused by non-biodegradable polymers. (b) Figure 1 shows a short section of a PVC molecule.
Identification cards - Recording technique - Part 9: Tactile identifier mark 5 ISO/IEC :2015
Nr. Standard reference Title 1 ISO/IEC 17021- Conformity assessment - Requirements for bodies providing audit and certification of management systems - Part 1: Requirements 2 ISO/IEC/IEEE 8802-A:2015 Information
A LEADER IN ADDITIVE MANUFACTURING. Metal additive manufacturing solutions for the global OEM supply chains
A LEADER IN ADDITIVE MANUFACTURING Metal additive manufacturing solutions for the global OEM supply chains INTRODUCTION TO SINTAVIA Founded in 2012, Sintavia is an innovator in the design, additive manufacturing
Validation methods for fire gas analyses - Part 2: Intralaboratory validation of quantification methods 19 ISO 15025:2016
Nr. Standard reference Title 1 ISO/IEC TS 17021-9:2016 Conformity assessment - Requirements for bodies providing audit and certification of management systems - Part 9: Competence requirements for auditing
MiniWarn. Fits Your Application. Intelligent. Rugged. Flexible. Ergonomic. Easy to use. Multi-Gas Instrument
Fits Your Application Intelligent Rugged Flexible Ergonomic Easy to use Multi-Gas Instrument Draeger: First in detection Since 1937, when we introduced our first detector tube, Dräger has been the world
ISO 4148 INTERNATIONAL STANDARD. Road vehicles Special warning lamps Dimensions. Véhicules routiers Feux spéciaux d'avertissement Dimensions
INTERNATIONAL STANDARD ISO 4148 Fourth edition 2004-11-01 Road vehicles Special warning lamps Dimensions Véhicules routiers Feux spéciaux d'avertissement Dimensions Reference number ISO 4148:2004(E) ISO
Tile-block Version2.8 Certification Criteria
Eco Mark Product Category No.109 Tile-block Version2.8 Certification Criteria Applicable Scope (1) Ceramic tiles Ceramics tiles corresponding to categories Ceramic tile of JIS A 5209 or Ceramic tile of
VMS2 Resin barrier vacuum line
Resin barrier vacuum line MSDS No: VMS2 Health and Safety at Work - Control of Substances Hazardous to Health Material Safety Data Sheet 1) Chemical Product and Company Identification PRODUCT NAME: VMS2
ATRONA Test Labs, Inc Zenith Parkway, Loves Park, IL Atif Ott Odeh Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ATRONA Test Labs, Inc. 5271 Zenith Parkway, Loves Park, IL 61111 Atif Ott Odeh Phone: 815-229-8620 TESTING Valid to: March 29, 2017 Certificate Number: AT-1119
Presented by Peter WONG, Chief Marketing Officer Nov 16, 2017
Presented by Peter WONG, Chief Marketing Officer Nov 16, 2017 Company Profile Core Business & Upgrade Transformation Awards & Recognitions Innovation Research & Development Anti-microbial Plastic Material
Polymers & Composites Projects. Current projects portfolio. Bruce Duncan
Polymers & Composites Projects Current projects portfolio Bruce Duncan Materials Characterisation Programme 2006-2009 SM06: Knowledge based design for plastics Develop and code a validated model for predicting
Rubber, vulcanized or thermoplastic - Determination of flex cracking and crack growth (De Mattia) 8 ISO 812:2017
Nr. Standard reference Title 1 ISO 9667:2017 Aircraft ground support equipment - Tow bars 2 ISO 12619-8:2017 hydrogen/natural gas blends fuel system components - Part 8: Pressure indicator 3 ISO 10329:2017
Equipment for Crop Protection Closed Chemical Transfer Systems (CTS) Performance Specification
International Standards in process An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a
Guidelines for Quantifying GHG emission. reductions of goods or services through Global. Value Chain
Guidelines for Quantifying GHG emission reductions of goods or services through Global Value Chain March 2018 Ministry of Economy, Trade and Industry Table of Contents Introduction... 2 1. Use of the Guidelines...
PVC-U INDUSTRIAL FLUID HANDLING
INDUSTRIAL FLUID HANDLING Durapipe PVC-U for process chemicals and industrial fluid handling. Our PVC-U pipe and fittings provide excellent chemical resistance making it ideal for various industrial applications.
ANSI-ASQ National Accreditation Board/ACLASS
ANSI-ASQ National Accreditation Board/ACLASS SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ATRONA Test Labs, Inc. 5271 Zenith Parkway, Loves Park, IL 61111 Atif Ott Odeh Phone: 815-229-8620 TESTING Valid
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 11357-6 Second edition 2008-06-15 Corrected version 2008-11-15 Plastics Differential scanning calorimetry (DSC) Part 6: Determination of oxidation induction time (isothermal
Product Control Data Sheet
Product Control Data Sheet Plastics pressure piping systems made of cross-linked polyethylene (PE-X) for hot and cold water installations Pressure piping systems for the distribution of hot and cold water
Completed Projects / Projets terminés
Completed Projects / Projets terminés Reaffirmed Standards CAN/CSA-ISO/IEC 1539-3:02 (R2006) Information technology Programming languages Fortran Part 3: Conditional compilation (Adopted ISO/IEC 1539-3:1999)
M. Ikhlasul Amal 1) Research Center for Metallurgy and Material Indonesian Institute of Sciences 2) Indonesian Society for Nano
National policy, regulatory and institutional support mechanism/framework and critical gaps in testing standardization and certification of nanomaterials and nanoproducts: INDONESIA chapter M. Ikhlasul
Specification and approval of welding procedures for production welding of steel castings
International Standards in process An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a
Heating elements shall not be used for FRP tank-containers including tank swap bodies.
Chapter 6.9 6.9.1 General Requirements for the design, construction, equipment, type approval, testing and marking of fibre-reinforced plastics (FRP) tank-containers including tank swap bodies NOTE: For
Hydrogen Technologies Standards DISCUSSION PAPER
Hydrogen Technologies Standards DISCUSSION PAPER 2 Contents Introduction...3 Goals and outcomes...4 Ahead of the forum...4 Background...5 A standards snapshot...6 International technical committees...7
ISO 4161:2012 * Hexagon nuts with flange, style 2 Coarse thread D
Standards published ew International Standards published between 01 August and 31 August 2012 * Available in English only ** French version of standard previously published in English only Price group
ISO PROJETOS EM VOTAÇÂO NOVEMBRO E DEZEMBRO
ISO PROJETOS EM VOTAÇÂO NOVEMBRO E DEZEMBRO ISO/JTC1 Information Technology ATÉ 22 DE DEZEMBRO DE 2017 ISO/IEC DIS 18745-1 (Ed 2) - Information technology -- Test methods for machine readable travel documents
Provläsningsexemplar / Preview. First edition
Provläsningsexemplar / Preview TECHNICAL SPECIFICATION ISO/TS 16189 First edition 2013-07-15 Footwear Critical substances potentially present in footwear and footwear components Test method to quantitatively
UV/Vis Spectrophotometry. Time for New Demands SPECORD PLUS
UV/Vis Spectrophotometry Time for New Demands SPECORD PLUS 2 SPECORD PLUS Series Among more than 150,000 Jena photometers installed worldwide, the SPECORD is a classic. The series of the SPECORD PLUS double-beam
Thermal Spray Process Training
1 of 8 Thermal Spray Process Training Sauer Engineering John P. Sauer jopsauer@fuse.net 513-290-3617 Thermal Spray Process Course 2 of 8 Course offerings would be a combination of days and topics below
CIM Forum Charter Dated
CIM Forum Charter Dated 2018-12-18 The information provided below is subject to change and reflects the current state of the CIM Forum charter within the DMTF. Management Problem(s) and Environment The
'W inôusrrialprôfiles & SHEETS
dualtech 'W inôusrrialprôfiles & SHEETS PRODUCT CATALOGUE -CONSTRUCTION -SHIP BUILDING -RAIL TRANSiT -AUTOMOTIVE -AVIATION -POWER & ELECTRONICS Aluminum and aluminum alloy provide some good properties
CHINA: TREND IN PSA TAPE MANUFACTURING
CHINA: TREND IN PSA TAPE MANUFACTURING Mr. Wu, W-Q (Hong-Chang Adhesive Products Co.) Dr. Yan Zhang (Kensinger Group Inc.) Summary: In 2005, total output of PSA products in China was over 7 billion square
PROCESS ECONOMICS PROGRAM
PROCESS ECONOMICS PROGRAM Abstract SRI INTERNATIONAL Menlo Park, California 94025 Process Economics Program Report No. 13D POLYVINYL CHLORIDE (May 1982) This supplementary report reviews recent developments
International Standards in process
International Standards in process An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a
F A C U L T Y O F M E T A L L U R G Y A N D M A T E R I A L S S C I E N C E
F A C U L T Y O F M E T A L L U R G Y A N D M A T E R I A L S S C I E N C E S P E C I A L T I E S : 1 1 ENERGY AND ECOLOGY EFFICIENCY IN METALLURGY METALLURGY OF FERROUS METALS METALLURGICAL NON-FERROUS
COUNCIL REGULATION (EU)
EN L 94/2 Official Journal of the European Union 8.4.2011 REGULATIONS COUNCIL REGULATION (EU) No 333/2011 of 31 March 2011 establishing criteria determining when certain types of scrap metal cease to be
NOVOTEST is leading company of the manufacture devices and systems for non-destructive testing in Ukraine.
2 NOVOTEST is leading company of the manufacture devices and systems for non-destructive testing in Ukraine. Today we are producing instruments for measuring a wide range of parameters and quality testing
Paper, board and pulps Measurement of diffuse blue reflectance factor Part 1: Indoor daylight conditions (ISO brightness)
Standards published New International Standards published between 01 September and 30 September 2016 * vailable in English only ** French version of standard previously published in English only Price
UNI-BELL PVC PIPE ASSOCIATION UNI-B-15-10
UNI-BELL PVC PIPE ASSOCIATION UNI-B-15-10 RECOMMENDED STANDARD SPECIFICATION FOR POLYVINYL CHLORIDE (PVC) FABRICATED PRESSURE FITTINGS November 2010 UNI-BELL PVC PIPE ASSOCIATION 2711 LBJ Freeway, Suite
RESOPAL -Decorative High Pressure Laminates HPL according to EN 438
Product Data Sheet RESOPAL -Decorative High Pressure Laminates HPL according to EN 438 This information describes the composition of RESOPAL -HPL and gives advice for their handling, processing, use, and
Technical TFTEI meeting of 24 June Agenda
Guidance document for estimation and measurement of VOC emissions from activities covered by annex VI of the Gothenburg Protocol Technical TFTEI meeting of 24 June 2015 Nadine ALLEMAND (Technical secretariat)
Mapping of ISO standards on LNG
Mapping of ISO standards on LNG Date /07/18 Reference ISO/TC 67/SC9 N 135 Resolution 15/ was taken by ISO/TC 67/SC9 on -10-19 to produce a mapping of existing standards in LNG equipment and installation.
Polyesters are made by a different method of polymerisation. The equation for the reaction to produce a polyester can be represented as:
Q1.Ethene is used to produce poly(ethene). (a) Draw the bonds to complete the displayed formulae of ethene and poly(ethene) in the equation. (b) Polyesters are made by a different method of polymerisation.
LIST OF STANDARDS DEVELOPED IN CIVIL ENGINEERING STANDARDS
LIST OF STANDARDS DEVELOPED IN CIVIL ENGINEERING STANDARDS NO RS NO TITLE SCOPE 1 RS EAS 148-1:2004 Cements- Test methods-part 1:Determination of strength This Part 1 of this East African Standard specifies
CERTIFICATION OF COMPANIES IN WELDED FABRICATION, TODAY AND IN THE FUTURE
Article CERTIFICATION OF COMPANIES IN WELDED FABRICATION, TODAY AND IN THE FUTURE Özlem KARAMAN GSI SLV-TR ozlem.karaman@gsi.com.tr Özgür AKÇAM** GSI SLV-TR ozgur.akcam@gsi.com.tr ABSTRACT Welding is a
TECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION IEC TS 62832-1 Edition 1.0 2016-12 colour inside Industrial-process measurement, control and automation Digital factory framework Part 1: General principles INTERNATIONAL ELECTROTECHNICAL
Green Label Product Steel Furniture (TGL-21-R2-14)
Green Label Product Steel Furniture (TGL-21-R2-14) Revision Approved On 18 November 2014 Thailand Environment Institute (TEI) 16/151 Muang Thong Thani, Bond Street, Bangpood, Pakkred, Nonthaburi 11120
ISO 6281 INTERNATIONAL STANDARD. Plain bearings Testing under conditions of hydrodynamic and mixed lubrication in test rigs
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 6281 First edition 2007-06-15 Plain bearings Testing under conditions of hydrodynamic and mixed lubrication in test rigs Paliers lisses Essai des
Metal Framing Channels Overview
New Trivalent Galv-Krom Finish Is RoHS Compliant Thomas & Betts is proud to introduce the new and improved Trivalent Galv-Krom finish. Galv-Krom finish is a combination of.5 mils electro-plated Zinc and
Improving safety of chemical powder systems using masterbatch in polymer and petrochemical industries
Paper Code: (imbpa15-00660045) Improving safety of chemical powder systems using masterbatch in polymer and petrochemical industries S.A. Razavi Alavi, M. Torabi Angaji, M. Shirazi, Y. Bahrami, M.R. Mozdianfard
Rolled billets FOR THE AUTOMOTIVE INDUSTRY, MINING, THE OIL AND GAS INDUSTRY AND GENERAL MECHANICAL ENGINEERING
Rolled billets FOR THE AUTOMOTIVE INDUSTRY, MINING, THE OIL AND GAS INDUSTRY AND GENERAL MECHANICAL ENGINEERING Buderus Edelstahl Buderus Edelstahl CONTENTS Buderus Edelstahl 2 Products 4 Production 5
Appendix I: Other Standards on Metallography/ Materialography
686 METALLOGRAPHIC AND MATERIALOGRAPHIC SPECIMEN Vander Voort, G. V., Metallography Principles and Practice, ASM International, Materials Park, Ohio, USA, 1999. Waschull, H., Präparative Metallographie,
Air cargo Fire resistant containers Design, performance and testing requirements
International Standards in process An International Standard is the result of an agreement between the member bodies of. A first important step towards an International Standard takes the form of a committee
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AKRON RUBBER DEVELOPMENT LABORATORY, INC. 2887 Gilchrist Road Akron, OH 44305 Rick Behne Phone: 330 794 6600 CHEMICAL Valid To: January 31, 2020 Certificate
Draft for comments only Not to be cited as East African Standard
EAST AFRICAN STANDARD CD/K/094-3:2009 ICS 91.140.60; 23.040.45 Multilayer piping systems for hot and cold water installations inside buildings Part 3: Fittings EAST AFRICAN COMMUNITY EAC 2010 First Edition
This document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 17367 Second edition 2013-03-01 Supply chain applications of RFID Product tagging Applications de chaîne d approvisionnements de RFID Étiquetage de produit Reference number ISO
ISO INTERNATIONAL STANDARD. Plain bearings Quality control techniques and inspection of geometrical and material quality characteristics
INTERNATIONAL STANDARD ISO 12301 Second edition 2007-10-15 Plain bearings Quality control techniques and inspection of geometrical and material quality characteristics Paliers lisses Techniques de contrôle
Comparison_of_existing_ methods_for_the_determination_of_nodularity_ _jk
ISO/TC 25 N 468 Comparison_of_existing_ methods_for_the_determination_of_nodularity_2015-02-03_jk Table 1 Definition and description of nodularity in ISO TC 25 Standards ISO 1083 [1] The nodularity of
Specialist in solving environmental problems
Specialist in solving environmental problems P.zza Maggiolini 40, 20015 Parabiago (MI) - ITALY Tel. +39-0331-551668 Fax +39-0331-551642 www.pramec-srl.com pramec@pramec-srl.com INTRODUCTION PRAMEC is a
ADDITIVE MANUFACTURING BODY OF KNOWLEDGE
ADDITIVE MANUFACTURING BODY OF KNOWLEDGE The Additive Manufacturing Body of Knowledge was developed by the Additive Manufacturing Leadership Initiative (AMLI). AMLI is a collaborative group consisting