ISO : 2010 Design of graphical symbols for use in the technical documentation of products Part 1: Basic rules G
|
|
- Bartholomew McLaughlin
- 5 years ago
- Views:
Transcription
1 International Standards in process An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a committee draft (D) - this is circulated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the entral Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. Standards published New International Standards published between 08 June and 05 July *Available in English only ** French version of standard previously published in English only Price group T 4 Rolling bearings ISO 113: Rolling bearings Plummer block housings Boundary dimensions D ISO 8443: Rolling bearings Radial ball bearings with flanged outer ring Flange dimensions T 10 Technical product documentation ISO : Design of graphical symbols for use in the technical documentation of products Part 1: Basic rules G T 20 Aircraft and space vehicles ISO : * Space systems Oxygen safety Part 5: Operational and emergency procedures E ISO 24113: * Space systems Space debris mitigation requirements G T 22 Road vehicles ISO 2575: Road vehicles Symbols for controls, indicators and tell-tales U ISO : 2009** Electrically propelled road vehicles Safety specifications Part 1: On-board rechargeable energy E storage system (RESS) ISO : 2009** Electrically propelled road vehicles Safety specifications Part 2: Vehicle operational safety means and protection against failures ISO : * Road vehicles ommunication on FlexRay Part 1: General information and use case definition B ISO : * Road vehicles ommunication on FlexRay Part 2: ommunication layer services V ISO 11026: * Heavy commercial vehicles and buses Test method for roll stability losing- curve test F T 24 Particle characterization including sieving T 28 Petroleum products and lubricants ISO : Petroleum products Fuels (class F) classification Part 1: ategories of marine fuels A ISO 8217: Petroleum products Fuels (class F) Specifications of marine fuels N T 29 Small tools ISO 8695: Tools for pressing Punches Nomenclature and terminology E T 45 Rubber and rubber products ISO 7231: Polymeric materials, cellular, flexible Determination of air flow value at constant pressure-drop F ISO 10638: * Rubber Identification of antidegradants by gas chromatography/mass spectrometry S T 46 ISO 690: Information and documentation Information and documentation Guidelines for bibliographic references and citations to information resources R T 59 Building construction ISO : * onstruction procurement Part 1: Processes, methods and procedures XA ISO 21930:2007 Sustainability in building construction Environmental declaration of building products M T 67 ISO : 2006** ISO : 2005** ISO : 2006** Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries Petroleum and natural gas industries ompletion fluids and materials Part 2: Measurement of properties of proppants used in hydraulic fracturing and gravel- packing operations Petroleum and natural gas industries Design and operation of subsea production systems Part 10: Specification for bonded flexible pipe Petroleum and natural gas industries Progressing cavity pump systems for artificial lift Part 2: Surface-drive systems N W T
2 T 68 ISO/TR 14742: Financial services * Financial services Recommendations on cryptographic algorithms and their use P T 76 Transfusion, infusion and injection equipment for medical and pharmaceutical use ISO 22413: Transfer sets for pharmaceutical preparations Requirements and test methods G T 79 ISO 2143: ISO 2931: ISO 3210: ISO 7599: Light metals and their alloys Anodizing of aluminium and its alloys Estimation of loss of absorptive power of anodic oxidation coatings after sealing Dye-spot test with prior acid treatment Anodizing of aluminium and its alloys Assessment of quality of sealed anodic oxidation coatings by measurement of admittance Anodizing of aluminium and its alloys Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution * Anodizing of aluminium and its alloys General specifications for anodic oxidation coatings on aluminium L T 92 Fire safety ISO : * Fire tests alibration and use of heat flux meters Part 1: General principles G T 104 ISO/PAS 18186: Freight containers * Freight containers RFID cargo shipment tag system E T 106 Dentistry ISO 28158: Dentistry Integrated dental floss and handles D T 108 ISO : 1997/Amd 1: ISO : 2001/Amd 1: Mechanical vibration, shock and condition monitoring * Mechanical vibration and shock Evaluation of human exposure to whole- body vibration Part 1: General requirements Amendment 1 * Mechanical vibration and shock Evaluation of human exposure to whole- body vibration Part 4: Guidelines for the evaluation of the effects of vibration and rotational motion on passenger and crew comfort in fixed-guideway transport systems Amendment 1:. XZ XZ T 117 Fans ISO 13349: Fans Vocabulary and definitions of categories S T 119 ISO 4498: T 127 ISO 9533: Powder metallurgy Sintered metal materials, excluding hardmetals Determination of apparent hardness and microhardness Earth-moving machinery Earth-moving machinery Machine- mounted audible travel alarms and forward horns Test methods and performance criteria F G T 135 Non-destructive testing ISO 7963: 2006** Non-destructive testing Ultrasonic testing - Specification for calibration block No. 2 E T 138 ISO/TS 19911: Plastics pipes, fittings and valves for the transport of fluids * Plastics pipes and fittings Format of a technical file for characterizing PE spigot end fittings B T 147 Water quality ISO 11704: Water quality Measurement of gross alpha and beta activity concentration in non-saline water Liquid scintillation counting method ISO/TS 13530: Water quality Guidance on analytical quality control for chemical and physicochemical water analysis 2009** F R T 150 Implants for surgery ISO 8637: * ardiovascular implants and extracorporeal systems Haemodialysers, haemodiafilters, haemofilters J and haemoconcentrators ISO 8638: * ardiovascular implants and extracorporeal systems Extracorporeal blood circuit for haemodialysers, G haemodiafilters and haemofilters ISO 13960: * ardiovascular implants and extracorporeal systems Plasmafilters E T 163 Thermal performance and energy use in the built environment ISO : * Thermal performance of windows and doors Determination of thermal transmittance by the hot-box method Part 1: omplete windows and doors U
3 T 164 Mechanical testing of metals ISO 148-1: 2009** Metallic materials harpy pendulum impact test Part 1: Test method M T 194 Biological evaluation of medical devices T 204 Intelligent transport systems ISO : * Intelligent transport systems Reference model architecture(s) for the ITS sector Part 5: P Requirements for architecture description in ITS standards ISO/TS * Electronic fee collection Application interface definition for autonomous systems Part 1: harging L : ISO/TS : * Electronic fee collection Application interface definition for autonomous systems Part 2: ommunication and connection to the lower layers M T 211 ISO/TS 19130: Geographic information/geomatics * Geographic information - Imagery sensor models for geopositioning XB T 213 ISO : ISO : ISO : Dimensional and geometrical product specifications and verification Geometrical product specifications (GPS) Surface texture: Areal Part 601: Nominal characteristics of contact (stylus) instruments Geometrical product specifications (GPS) Surface texture: Areal Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments Geometrical product specifications (GPS) Surface texture: Areal Part 701: alibration and measurement standards for contact (stylus) instruments J P M T 215 Health informatics ISO : Health informatics Patient healthcard data Part 8: Links E T 216 Footwear ISO 10765: Footwear Test method for the characterization of elastic materials Tensile performance D ISO 10768: Footwear Test method for the determination of the resistance of elastic materials for footwear to repeated extension Fatigue resistance JT 1 Information technology ISO/IE : * Information technology Security techniques Entity authentication Part 1: General F ISO/IE TR * Information technology Radio frequency identification device conformance test methods Part 7: N : Test methods for active air interface communications at 433 MHz ISO/IE 20060: * Information technology Open Terminal Architecture (OTA) Virtual machine XB ISO/IE * Information technology Multimedia framework (MPEG-21) Part 19: Media Value hain Ontology W : ISO/IE * Information technology Multimedia application format (MPEG-A) Part 9: Digital Multimedia XZ :2008/ Amd Broadcasting application format Amendment 2: Harmonization on MPEG-2 TS storage 2: ISO/IE 29157: * Information technology Telecommunications and information exchange between systems PHY/MA specifications for short-range wireless low-rate applications in the ISM band S Standards confirmed The following International Standards are confirmed for a five year period: T 17 ISO 439:1994 ISO 1052:1982 ISO 4934:2003 ISO 4935:1989 ISO 4941:1994 ISO 4952:2006 ISO 9034:1987 ISO 9556:1989 ISO 9647:1989 Steel
4 ISO :1994 ISO 10698:1994 ISO 10701:1994 ISO :2005 ISO :1999 ISO 15351:1999 ISO 15355:1999 ISO 24314:2006 T 20 ISO 44:1975 T 22 ISO 3412:1992 ISO :1987 ISO 4024:1992 ISO :2002 ISO :1994 ISO :1994 ISO 6856:2005 ISO 11565:2006 ISO 16673:2007 ISO 19813:2006 T 23 ISO :1995 ISO :1992 ISO :2006 ISO 5008:2002 ISO 7914:2002 ISO 11448:1997 ISO/TS 28924:2007 T 29 ISO 6789:2003 T 33 ISO :2007 ISO :2007 ISO :2007 T 35 ISO 591-1:2000 ISO 787-3:2000 ISO 787-8:2000 ISO 1248:2006 ISO 1249:1974 ISO 2495:1995 ISO :1997 ISO :2000 ISO :2000 ISO :1997 ISO :2000 ISO :2000 ISO :2000 ISO :2000 ISO :2000 ISO :2000 ISO :1998 ISO :2000 ISO :2000 ISO :1998 ISO :1998 ISO :1998 Aircraft and space vehicles Road vehicles Tractors and machinery for agriculture and forestry Small tools Refractories Paints and varnishes
5 ISO :1998 ISO :1998 ISO :1999 ISO :1997 ISO 3549:1995 ISO 10601:2007 T 38 ISO 1805:2006 T 45 ISO 1306:1995 ISO 1437:2007 ISO 1795:2007 ISO 5796:2000 ISO 7664:2000 T 46 ISO :2006 T 54 ISO/TR 11018:1997 ISO/TR 21092:2004 T 60 ISO :1999 T 61 ISO 60:1977 ISO 308:1994 ISO :2000 ISO 2114:2000 ISO 2577:2007 ISO 3374:2000 ISO :2000 ISO :2000 ISO 4614:1977 ISO 8989:1995 ISO 9771:1995 ISO 11567:1995 ISO 13002:1998 ISO 15100:2000 ISO 21318:2007 T 76 ISO :2007 T 85 ISO 9005:2007 ISO :2007 ISO 20553:2006 ISO 21482:2007 T 89 ISO 12465:2007 T 92 ISO/TS 16733:2006 ISO/TS 19700:2007 T 94 ISO :2007 T 108 ISO :2007 T 112 ISO :1974 Textiles Rubber and rubber products Information and documentation Essential oils Gears Plastics Transfusion, infusion and injection equipment for medical and pharmaceutical use Nuclear energy Wood-based panels Fire safety Personal safety Protective clothing and equipment Mechanical vibration, shock and condition monitoring Vacuum technology
6 ISO :1981 ISO :1981 T 118 ISO :1977 T 121 ISO :1987 ISO 5362:2006 ISO :2007 ISO 10083:2006 T 131 ISO 4400:1994 ISO 5596:1999 ISO 6952:1994 ISO 8778:2003 T 138 ISO/TS 10839:2000 ISO 13845:2000 ISO 13846:2000 ISO 14236:2000 T 147 ISO 8192:2007 ISO/TS 11370:2000 ISO/TR : 1997 ISO/TR 13843:2000 ISO/TR 15462:2006 ISO 17858:2007 T 163 ISO 15099:2003 T 184 ISO :2007 T 202 ISO 22489:2006 T 219 ISO 2424:2007 ompressors and pneumatic tools, machines and equipment Anaesthetic and respiratory equipment Fluid power systems Plastics pipes, fittings and valves for the transport of fluids Water quality Thermal performance and energy use in the built environment Automation systems and integration Microbeam analysis Floor coverings JT 1 Information technology ISO :1988 ISO :1987 ISO 9660:1988 ISO/IE : 1999 ISO/IE : 1993 ISO/IE : 1994 ISO/IE : 1994 ISO/IE 9899:1999 ISO/IE 11756: 1999 ISO/IE 13210: 1999 ISO/IE 15851: 1999 ISO/IE 16509: 1999 ISO/IE 18009: 1999 ISO/IE TR 19767: 2005 ISO/IE TR 24718: 2005 Standards withdrawn Period from 08 June to 05 July
7 T 46 Information and documentation ISO 690-2:1997 (replaced by ISO 690:) T 92 Fire safety ISO/TS :2002 (replaced by ISO :) T 108 Mechanical vibration, shock and condition monitoring ISO 10056:2001 (replaced by ISO :2001/Amd 1:)
Rolling bearings Cast and pressed housings for insert bearings Boundary dimensions and tolerances
Standards published New International Standards published between 01 January and 31 January 2013 * Available in English only ** French version of standard previously published in English only Price group
More informationNEWS ISO STANDARDS: 2017/01
NEWS ISO STANDARDS: 2017/01 ISO/IEC 26557: 2016 214.00 ISO/IEC 26557 Software and systems engineering -- Methods and tools for variability mechanisms in software and systems product line ISO 13775-2: 2016
More informationCorrugating medium Determination of the flat crush resistance after laboratory fluting D
International Standards in process An International Standard is the result of an agreement between the member bodies of. A first important step towards an International Standard takes the form of a committee
More informationRolling bearings Tapered roller bearings Boundary dimensions and series designations Amendment 1
Standards published New International Standards published between 01 January and 31 January 2012 * Available in English only ** French version of standard previously published in English only Price group
More informationCross-recessed cheese head screws C. Hexagon head screws with metric fine pitch thread Product grades A and B F
International Standards in process An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a
More informationNEWS ISO STANDARDS: 2016/10
NEWS ISO STANDARDS: 2016/10 ISO/IEC 9995-9: 2016 239.00 ISO/IEC 9995-9 Information technology -- Keyboard layouts for text and office systems -- Part 9: Multi-lingual, multiscript keyboard layouts ISO
More informationPaper, board and pulps Measurement of diffuse blue reflectance factor Part 1: Indoor daylight conditions (ISO brightness)
Standards published New International Standards published between 01 September and 30 September 2016 * vailable in English only ** French version of standard previously published in English only Price
More informationNEWS ISO STANDARDS: 2014/04
NEWS ISO STANDARDS: 2014/04 ISO 9377-2: 2000 107.80 ISO 9377-2 Water quality -- Determination of hydrocarbon oil index -- Part 2: Method using solvent extraction and gas chromatography ISO/IEC 25063: 2014
More informationPROGETTI DI NORMA ISO IN INCHIESTA
PROGETTI DI NORMA ISO IN INCHIESTA Allegato al n. 7 di UNInotizie del 15 aprile 2013 PROGETTI ISO AL VOTO PRELIMINARE I progetti ISO in inchiesta pubblica possono essere acquistati contattando l Ufficio
More informationWelding consumables Deposition of a weld metal pad for chemical analysis B. Rolling bearings Chamfer dimensions Maximum values Amendment 1
Standards published New International Standards published between 01 June and 30 June 2013 * Available in nglish only ** rench version of standard previously published in nglish only Price group IIW 6847:2013
More informationNr. Standard reference Title
Nr. Standard reference Title 1 ISO/IEC 23008-3:2015/Amd 2:2016 Information technology - High efficiency coding and media delivery in heterogeneous environments - Part 3: 3D audio - Amendment 2: MPEG-H
More informationRolling bearings Sleeve type linear ball bearings Boundary dimensions and tolerances Amendment 1. ISO 6929:2013 * Steel products Vocabulary R
Standards published ew International Standards published between 01 ovember and 30 ovember 2013 Available in English only French version of standard previously published in English only Price group TC
More informationISO 4161:2012 * Hexagon nuts with flange, style 2 Coarse thread D
Standards published ew International Standards published between 01 August and 31 August 2012 * Available in English only ** French version of standard previously published in English only Price group
More informationNEWS ISO STANDARDS: 2019/02
NEWS ISO STANDARDS: 2019/02 ISO/TS 19278 58.00 ISO/TS 19278 Plastics - Instrumented micro-indentation test for hardness measurement ISO/TR 20118: 2019-04 158.00 ISO/TR 20118 Plastics - Guidance on fire
More informationAluminium and aluminium alloys. Castings. Chemical composition and mechanical
BSI titles relevant to the cast metals industry (as at 20/5/9) BSI Title International Equiv Aluminium and aluminium alloys. Castings. Chemical composition and mechanical where known 94/713477DC properties
More informationEXPRESSION OF INTEREST (EOI) FOR. Mechanical Works
EXPRESSION OF INTEREST (EOI) FOR Mechanical Works KWtE-03-PR-EO-ACC-0 Rev01 15 Version: Date: Prepared by: Approved: 01 7/11/18 VMC AMN Page 1 OF 6 1 Project overview ACCIONA s Engineering, Procuring &
More informationLIST OF PUBLISHED STANDARDS
Report : 08-0-6 Of 6 Total Count: 8 SABS/TC 004 50-:005/ISO -:000 Rolling - Tolerances Part : Terms 005-0-04 and definitions 0-07-9 50-:005/ISO -:00 5:007/ISO 76:006 Rolling - Tolerances Part : Measuring
More informationJoint Project Committee - Energy efficiency and renewable energy sources - Common terminology
International Standards in process An International Standard is the result of an agreement between the member bodies of. A first important step towards an International Standard takes the form of a committee
More informationSpecification and approval of welding procedures for production welding of steel castings
International Standards in process An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a
More informationISO INTERNATIONAL STANDARD. Thermal spraying Characterization and testing of thermally sprayed coatings
INTERNATIONAL STANDARD ISO 14923 First edition 2003-07-01 Thermal spraying Characterization and testing of thermally sprayed coatings Projection thermique Caractérisation et essais des revêtements obtenus
More informationWork Plan ( )
\\\\\\ Work Plan (-2019) Secretariat of ISO/TMB / ATMG ISO/TMB/ATMG Arabic Translation Management Group (ATMG) Work Plan (-2019) Page 1 of 16 Table of Contents S. N Description Page 1 Objectives 3 2 Translation
More informationCourse Description EMME 1
Course Description 01211211 Introduction to CAD/CAM 3(2 3 6) CAD/CAM systems for production engineering, hardwares and softwares for CAD/CAM systems, wireframe, surface and solid design, three dimension
More informationMedical devices Recognized essential principles of safety and performance of medical devices. Part 1:
INTERNATIONAL STANDARD ISO 16142-1 First edition 2016-03-01 Medical devices Recognized essential principles of safety and performance of medical devices Part 1: General essential principles and additional
More informationISO 7041:2012 * Prevailing torque type hexagon nuts (with non-metallic insert), style 2 Property classes 9 and 12 B
Standards published New International Standards published between 01 May and 31 May 2012 * Available in English only ** French version of standard previously published in English only Price group T 2 ISO
More informationMapping of ISO standards on LNG
Mapping of ISO standards on LNG Date /07/18 Reference ISO/TC 67/SC9 N 135 Resolution 15/ was taken by ISO/TC 67/SC9 on -10-19 to produce a mapping of existing standards in LNG equipment and installation.
More informationFACILITATING AGRICULTURE AUTOMATION USING STANDARDS
FACILITATING AGRICULTURE AUTOMATION USING STANDARDS Robert K. Benneweis P. Eng Outline Available standards Developing standards Implemented automation Standard based automation implementation Potential
More informationStandard reference Title
Standard reference Title 1 ISO/IEC 23006- Information technology -- Multimedia service platform technologies -- Part 1: Architecture 2 ISO 2100 Educational organizations -- Management systems for educational
More informationISO 3030:2011 Rolling bearings Radial needle roller and cage assemblies Boundary dimensions and tolerances E
Standards published New International Standards published between 01 September and 30 September 2011 * Available in English only ** French version of standard previously published in English only Price
More informationSupplement to ISOfocus
I ISO Update Supplement to ISOfocus September 2014 International Standards in process An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards
More informationAerospace AC Induction Electric Motor Driven, Variable Delivery, Hydraulic Pumps General Specifications
International Standards in process An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a
More informationInformation technology - Process assessment - Process capability assessment model for information security management 2 ISO/IEC :2016
Nr. Standard reference Title 1 ISO/IEC TS 33072:2016 Information technology - Process assessment - Process capability assessment model for information security management 2 ISO/IEC 15946- Information technology
More informationDr. M. Sayuti, ST.,M.Sc JURUSAN TEKNIK INDUSTRI FAKULTAS TEKNIK UNIVERSITAS MALIKUSSALEH
POWDER METALLURGY Dr. M. Sayuti, ST.,M.Sc JURUSAN TEKNIK INDUSTRI FAKULTAS TEKNIK UNIVERSITAS MALIKUSSALEH 1- INTRODUCTION Powder metallurgy is the name given to the process by which fine powdered materials
More informationProcessing of Engineering Materials
Unit 7: Unit code Machining and Processing of Engineering Materials A/615/1481 Unit level 4 Credit value 15 Introduction Practical articles that we see and use every day such as automobiles, aircraft,
More informationFaculty of Engineering
Faculty of (/MA) 1 1 Mathematical Analysis Chemistry Physics Descriptive Geometry English Mechanics I Science and Professional Communication Techniques Linear Algebra, Analytic and Differential Geometry
More information4 ISO/IEC :2016 Information technology - Biometric sample quality - Part 1: Framework
Nr. Standard reference Title 1 ISO/IEC 15149-3:2016 between systems - Magnetic field area network (MFAN) - Part 3: Relay Protocol for Extended Range 2 ISO/IEC 15149-4:2016 between systems - Magnetic field
More informationISO INTERNATIONAL STANDARD. Dentistry Mercury and alloys for dental amalgam. Art dentaire Mercure et alliages pour amalgame dentaire
INTERNATIONAL STANDARD ISO 24234 First edition 2004-10-15 Dentistry Mercury and alloys for dental amalgam Art dentaire Mercure et alliages pour amalgame dentaire Reference number ISO 2004 Provläsningsexemplar
More informationRubber, vulcanized or thermoplastic - Determination of flex cracking and crack growth (De Mattia) 8 ISO 812:2017
Nr. Standard reference Title 1 ISO 9667:2017 Aircraft ground support equipment - Tow bars 2 ISO 12619-8:2017 hydrogen/natural gas blends fuel system components - Part 8: Pressure indicator 3 ISO 10329:2017
More information> HGW WATER - WATER AND BRINE - WATER HEAT PUMPS FOR INDOOR INSTALLATION. Available range. Unit description. Options. Accessories
> HGW WATER - WATER AND BRINE - WATER HEAT PUMPS FOR INDOOR INSTALLATION Available range Unit type IH Heat pump IP Reversible heat pump (reversible on the refrigerant side) ECO-FRIENDLY REFRIGERANT GAS
More informationMP-500. The most thermally efficient, robust and reliable medical incinerators on the market. Simply Built Better!
The most thermally efficient, robust and reliable medical incinerators on the market Simply Built Better! Specifically designed for medical waste. MP-500 The MP medical hot hearth Incinerators designed
More informationAnnex to the Accreditation Certificate D-PL
c GmbH Annex to the Accreditation Certificate D-PL-11086-01-00 according to DIN EN ISO/IEC 17025:2005 period ofvalidity: 05.08.2015 to 04.08.2020 Dateofissue: 05.08.2015 Certificate Holder: IFO - Institut
More informationPowder metallurgy. R.D.Makwana, IT, NU
Powder metallurgy History 1829 Woolaston- paper published Edison-electric light-filament 1909 Coolidge tungsten worked at elevated temperature New method of fabrication-refractory metals 1 Advantages of
More informationISO SERIES and Other Relevant Standards Last updated 17 May 2018
Environmental Management Systems AS/NZS ISO 14001:2015 Environmental management systems Requirements with guidance for use. AS/NZS ISO 14004:2016 ISO 14005:2010 (under review) BS 8555:2016 ISO 14006:2011
More informationQUALANOD SPECIFICATIONS UPDATE SHEET Nº 1 Edition page 1/5 REVISED APPENDIX VII LIST OF RELEVANT STANDARDS
page 1/5 REVISED APPENDIX VII LIST OF RELEVANT STANDARDS Proposal: R. Furneaux QUALANOD resolution: Input by e-mail, 13.09.2010 - including the new ISO standards (replacing the EN 12373 series) - not refer
More informationTextiles - Determination of deodorant property - Part 4: Condensation sampling analysis 6 ISO 23125:2015 Machine tools - Safety - Turning machines
Nr. Standard reference Title 1 ISO/IEC 10373-2:2015 Identification cards - Test methods - Part 2: Cards with magnetic stripes 2 ISO/IEC 27040:2015 Information technology - Security techniques - Storage
More informationMP-400. The most thermally efficient, robust and reliable medical incinerators on the market. Simply Built Better!
The most thermally efficient, robust and reliable medical incinerators on the market Simply Built Better! Specifically designed for medical waste. MP-400 The MP medical hot hearth Incinerators designed
More informationManufacture of Material Handling Equipment
Manufacture of Material Handling Equipment TTS (Transportation Technology Systems) has more than 25 years of experience in manufacturing of industrial equipment, bridges and other large steel structures
More informationInternational Standards in process
International Standards in process An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a
More informationDOCUMENT DESPATCH ADVICE DRAFT IN WIDE CIRCULATION MHR 06 /T- 50/51/52/53/ TECHNICAL COMMITTEE: MHR 06
DRAFT IN WIDE CIRCULATION TECHNICAL COMMITTEE: MHR 06 DOCUMENT DESPATCH ADVICE Ref Date MHR 06 /T- 50/51/52/53/54 09-05-2008 DOC NO: MHR 06 (0114)/ISO 7199:1996 TITLE Cardiovascular implants and artificial
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15590-3 First edition 2004-11-01 Petroleum and natural gas industries Induction bends, fittings and flanges for pipeline transportation systems Part 3: Flanges Industries du
More informationMP-300. The most thermally efficient, robust and reliable medical incinerators on the market. Simply Built Better!
The most thermally efficient, robust and reliable medical incinerators on the market Simply Built Better! Specifically designed for medical waste. MP-300 The MP medical hot hearth Incinerators The Addfield
More informationMachine Specification
Machine Specification Machine Type: 1230A 2 Component: 1x Base 1x Hardener Adhesive pump system Table of Contents 1230A Machine Specification ------------------------------------------------------------
More informationISO 6281 INTERNATIONAL STANDARD. Plain bearings Testing under conditions of hydrodynamic and mixed lubrication in test rigs
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 6281 First edition 2007-06-15 Plain bearings Testing under conditions of hydrodynamic and mixed lubrication in test rigs Paliers lisses Essai des
More informationISO INTERNATIONAL STANDARD
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 16831 First edition 2012-04-01 Non-destructive testing Ultrasonic testing Characterization and verification of ultrasonic thickness measuring equipment
More informationIndex. Automotive engines, silicon nitride products development, 83-94
Index Advanced composite ceramics, properties and applications, 109-22 Aircraft engine bearings, shaft speed limits, 46-8 Alumina cast sintered, applications, 72-5 comparative erosive wear performance,
More informationProduct Control Data Sheet
Product Control Data Sheet Plastics pressure piping systems made of cross-linked polyethylene (PE-X) for hot and cold water installations Pressure piping systems for the distribution of hot and cold water
More information'W inôusrrialprôfiles & SHEETS
dualtech 'W inôusrrialprôfiles & SHEETS PRODUCT CATALOGUE -CONSTRUCTION -SHIP BUILDING -RAIL TRANSiT -AUTOMOTIVE -AVIATION -POWER & ELECTRONICS Aluminum and aluminum alloy provide some good properties
More informationALUMINUM POWDER METALLURGY
ALUMINUM POWDER METALLURGY Increased demand for light weight components, primarily driven by the need to reduce energy consumption in a variety of societal and structural components, has led to increased
More informationISO/IEC Guide 14:2018 * Products and related services Information for consumers C
Standards published New International Standards published between 01 March and 31 March 2018 * vailable in English only ** rench version of standard previously published in English only Price group OPOLO
More informationInternational Standards in process
International Standards in process An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a
More information2011 Engineering Studies HSC Examination Sample Answers
2011 Engineering Studies HSC Examination Sample Answers When examination committees develop questions for the examination, they may write sample answers or, in the case of some questions, answers could
More informationJoint Replacement Implants Hip Joint Prostheses
Translated English of Chinese Standard: YY0118-2016 www.chinesestandard.net Sales@ChineseStandard.net PHARMACEUTICAL INDUSTRY STANDARD YY OF THE PEOPLE S REPUBLIC OF CHINA ICS 11.040.40 C 35 YY 0118-2016
More informationBenefit from more than 60 years of experience with self-lubricating bearings
DEVA Product range Engineering Services DEVA more than just bearings Benefit from more than 60 years of experience with self-lubricating bearings Use our extensive material and application knowledge in
More informationCertificate of Registration
Certificate of Registration Awarded to: Company Registration number: 910 478 656 Achilles Utilities Nordics & Central Europe hereby confirms that is now fully registered as a supplier in Achilles Nordics
More informationCENTRIFUGAL COMPRESSORS MAINTENANCE & FAILURE ANALYSIS
Training Title CENTRIFUGAL COMPRESSORS MAINTENANCE & FAILURE ANALYSIS Training Duration 5 days Training Dates & Venue Centrifugal Compressors Maintenance & Failure Analysis 5 14 18 Apr $3,750 Riyadh, KSA
More informationISO/TR TECHNICAL REPORT. Cranes Bridge and gantry cranes International Standards for design and manufacturing requirements and recommendations
TECHNICAL REPORT ISO/TR 16880 First edition 2004-04-01 Cranes Bridge and gantry cranes International Standards for design and manufacturing requirements and recommendations Appareils de levage à charge
More informationISO 7599 INTERNATIONAL STANDARD. Anodizing of aluminium and its alloys General specifications for anodic oxidation coatings on aluminium
INTERNATIONAL STANDARD ISO 7599 Second edition 2010-07-01 Anodizing of aluminium and its alloys General specifications for anodic oxidation coatings on aluminium Anodisation de l'aluminium et de ses alliages
More informationImproved Quality by Electro Slag Re-Melting
Improved Quality by Electro Slag Re-Melting BY GÜNTER BUSCH* SYNOPSIS Electro Slag Re-Melting is a process performed after the primary melting steps in electro arc, induction or vacuum induction furnaces.
More informationOSMANIA UNIVERSITY No.10 /BE/Exams/TT TIME-TABLE
No.10 /BE/Exams/TT2012 30-10-2012 TIME-TABLE B.E. I/IV (Reg.) & (Suppl.) EXAMINATIONS: DECEMBER, 2012 Time: 02.00 p.m. to 5.00 a.m. Subject 20-12-2012 English 24-12-2012 Mathematics I 28-12-2012 Mathematics
More informationMANUFACTURING PROCESSES
1 MANUFACTURING PROCESSES - AMEM 201 Lecture 8: Forming Processes (Rolling, Extrusion, Forging, Drawing) DR. SOTIRIS L. OMIROU Forming Processes - Definition & Types - Forming processes are those in which
More informationISO INTERNATIONAL STANDARD. Petroleum and natural gas industries Progressing cavity pump systems for artificial lift Part 1: Pumps
INTERNATIONAL STANDARD ISO 15136-1 Second edition 2009-11-15 Petroleum and natural gas industries Progressing cavity pump systems for artificial lift Part 1: Pumps Industries du pétrole et du gaz naturel
More informationInternational Standards in process
International Standards in process An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a
More informationDRAFTS IN WIDE CIRCULATION DOCUMENT DESPATCH ADVICE MHD 10/ T- 2,3,41,33,43,44,45,46,47,48 10/02/2015 TECHNICAL COMMITTEE: MHD 10
DRAFTS IN WIDE CIRCULATION TECHNICAL COMMITTEE: MHD 10 DOCUMENT DESPATCH ADVICE Ref Date MHD 10/ T- 2,3,41,33,43,44,45,46,47,48 10/02/2015 ADDRESSED TO: 1. All members of Medical Laboratory Instruments
More informationCOURSE: ADVANCED MANUFACTURING PROCESSES. Module No. 4: ADVANCED WELDING PROCESSES
COURSE: ADVANCED MANUFACTURING PROCESSES Module No. 4: ADVANCED WELDING PROCESSES Lecture No.4: Friction Welding Process Principles: Friction Welding (FRW) is a solid state welding process which produces
More informationISO INTERNATIONAL STANDARD. Petroleum and natural gas industries Pipeline transportation systems Subsea pipeline valves
INTERNATIONAL STANDARD ISO 14723 Second edition 2009-06-15 Petroleum and natural gas industries Pipeline transportation systems Subsea pipeline valves Industries du pétrole et du gaz naturel Systèmes de
More informationENSA ENWESA SERVICES INDEX
ENSA ENWESA SERVICES INDEX 1. ENGINEERING, DESIGN AND TECHNOLOGY SERVICES (Ensa / ENWESA) Ensa has extensive experience designing nuclear components and pressure vessels since 1973 according to international
More informationOptics and photonics - Specifications for binoculars, monoculars and spotting scopes - Part 1: General purpose instruments 15 ISO :2016
Nr. Standard reference English title 1 ISO/IEC 1465 Information technology - International string ordering and comparison - Method for comparing character strings and description of the common template
More informationBI-MATERIAL COMPONENTS USING POWDER INJECTION MOLDING: DENSIFICATION, SHAPE COMPLEXITY, AND PERFORMANCE ATTRIBUTES
BI-MATERIAL COMPONENTS USING POWDER INJECTION MOLDING: DENSIFICATION, SHAPE COMPLEXITY, AND PERFORMANCE ATTRIBUTES Randall M. German, Donald F. Heaney, and John L. Johnson Center for Innovative Sintered
More informationPresentation to IMO as mentioned in the ST/SG/AC.10/C.3/2017/40 - (Russian Federation): Fibrereinforced plastics portable tanks
Committee of Experts on the Transport of Dangerous Goods and on the Globally Harmonized System of Classification and Labelling of Chemicals UN/SCETDG/52/INF.44 Sub-Committee of Experts on the Transport
More informationGENERAL CONTENTS SECTION I - NUCLEAR ISLAND COMPONENTS
- June 2013 Addendum GENERAL CONTENTS SECTION I - NUCLEAR ISLAND COMPONENTS SUBSECTION "A" : GENERAL RULES SUBSECTION "B" : CLASS 1 COMPONENTS SUBSECTION "C" : CLASS 2 COMPONENTS SUBSECTION "D" : CLASS
More informationPHRT HEAT PUMP WITH HYDRAULIC EQUIPMENT AIR / WATER 7 to 16 KW
TECHNICAL INSTRUCTIONS PHRT HEAT PUMP WITH HYDRAULIC EQUIPMENT AIR / WATER to KW PHRT PHRT PHRT For terminal units and boiler overhaul applications Heating Cooling PHRT.0 kw -.0 kw PHRT.00 kw -.0 kw 0.0
More informationProcess Line Control Solutions. Rockwell Automation Drive Systems
Process Line Control Solutions Rockwell Automation Drive Systems Global Technical Services No matter where in the world you need technical, service and parts support, you can count on the Rockwell Automation
More informationFXV. Closed Circuit Cooling Towers. Closed Circuit Cooling Towers. Product Detail FXV - C 1. Engineering Data FXV Models... C2
- C 1 Product Detail Engineering Data Models... C2 Structural Support Models... C6 Engineering Specifications... C8 - C 2 Engineering Data Models REMARK: Do not use for construction. Refer to factory certified
More informationFlow Meters with Float constructive series AF and BF for liquids and gases with remote flow indication
Flow Meters with Float constructive series AF and BF for liquids and gases with remote flow indication - Quality design - High corrosion resistance - Reliable measurement principle - Low weight and small
More informationA SHORT NOTE ON MANUFACTURING PROCESS OF METAL POWDERS
INTERNATIONAL JOURNAL OF RESEARCH IN COMPUTER APPLICATIONS AND ROBOTICS ISSN 2320-7345 A SHORT NOTE ON MANUFACTURING PROCESS OF METAL POWDERS 1 R.Raja, 2 M.Rajkumar 1 Assistant Lecturer, St. Joseph College
More informationSECTION HVAC PUMPS. A. Provide centrifugal HVAC pumps, called for in drawing schedule, and as needed for a complete and proper installation.
PART 1 - GENERAL 1.01 DESCRIPTION OF WORK SECTION 15540 HVAC PUMPS A. Provide centrifugal HVAC pumps, called for in drawing schedule, and as needed for a complete and proper installation. B. Provide variable
More informationTechnical White Paper
Technical White Paper XX.XXXX Component Cleanliness of Fluid Systems in Automotive and Hydraulics Complying with ISO Standards Abstract: As the presence of particulate contamination in the lubricant is
More informationManufacturing Processes 1 (MDP 114)
Manufacturing Processes 1 (MDP 114) First Year, Mechanical Engineering Dept., Faculty of Engineering, Fayoum University Dr. Ahmed Salah Abou Taleb 1 Cutting-Tool Materials and Cutting Fluids 2 Fracture
More informationPassed in Subject (AM811) AUTOMATION IN MANUFACTURING: 16011D D D D D D3321
MECHANICAL ENGINEERING ADVANCED MANUFACTURING SYSTEMS 16011D3303 16011D3308 16011D3309 16011D3311 1503PH1523 1503PH1559 Passed in Subject (AM811) AUTOMATION IN MANUFACTURING: 16011D3310 16011D3312 16011D3314
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 16831 First edition 2012-04-01 Non-destructive testing Ultrasonic testing Characterization and verification of ultrasonic thickness measuring equipment Essais non destructifs
More informationISO INTERNATIONAL STANDARD. Fire-resistance tests Elements of building construction Part 1: General requirements
INTERNATIONAL STANDARD ISO 834-1 First edition 1999-09-15 Fire-resistance tests Elements of building construction Part 1: General requirements Essai de résistance au feu Éléments de construction Partie
More informationApplication of DC-Arc Plasma Coating
Application of DC-Arc Introduction Application of Plasma Coating is nearly unlimited and is used in almost all sectors of industry; Table1. In many industries the quality of their products and the productivity
More informationIMPORT COMMERCIAL INVOICE REQUIREMENTS PRESENTED BY BRENT CLAYPOOL, LCB
REQUIREMENTS PRESENTED BY BRENT CLAYPOOL, LCB LEGAL REQUIREMENTS With the passage of the Modernization Act, the U.S. Customs and Border Protection Agency (CBP) has required every Importer of Record to
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15877-3 Second edition 2009-03-15 Plastics piping systems for hot and cold water installations Chlorinated poly(vinyl chloride) (PVC-C) Part 3: Fittings Systèmes de canalisations
More informationOSMANIA UNIVERSITY No.14 /BE/Exams/TT TIME-TABLE
B.E. I/IV (Suppl.) EXAMINATIONS: Nov./Dec., 2013 Time: 02.00 p.m. to 5.00 p.m. Subject 05-12-2013 English 09-12-2013 Mathematics I 12-12-2013 Mathematics II 17-12-2013 Physics 20-12-2013 Chemistry 24-12-2013
More informationLIST OF PUBLISHED STANDARDS
Report : 08-0-7 Of 6 LST OF PUBLSHED STNDRDS nt 0 5:00/SO 500:007 Earth-moving machinery - Rubber-tyred machines - Steering requirements 00-0-0 0-09-09 55:00/SO 065:008 59:008/SO 5006:006 Earth-moving
More informationDESIGN, ANALYSIS AND FABRICATION OF A HYDRAULIC DIE EJECTOR FOR A POWDER METALLURGY COMPONENT
Int. J. Mech. Eng. & Rob. Res. 2015 J Abhilash et al., 2015 Research Paper ISSN 2278 0149 www.ijmerr.com Vol. 4, No. 1, January 2015 2015 IJMERR. All Rights Reserved DESIGN, ANALYSIS AND FABRICATION OF
More informationCleans, maintains, repairs, and overhauls water and wastewater plant, pumping, treatment and all other associated mechanical equipment.
Job Title: Maintenance Technician/Plant Operator Reports To: Operations Manager FLSA Status: Non-exempt Date: July 21, 2015 Maintenance Technician/Plant Operator Job Summary: Under the general supervision
More informationInformation technology - Security techniques - Incident investigation principles and processes
Nr. Standard reference Title 1 ISO/IEC 27043:2015 Information technology - Security techniques - Incident investigation principles and processes 2 ISO/IEC 1799 3 ISO/IEC 15459-2:2015 4 ISO 1794 5 ISO 16694:2015
More informationValidation methods for fire gas analyses - Part 2: Intralaboratory validation of quantification methods 19 ISO 15025:2016
Nr. Standard reference Title 1 ISO/IEC TS 17021-9:2016 Conformity assessment - Requirements for bodies providing audit and certification of management systems - Part 9: Competence requirements for auditing
More informationINIZIATIVE INDUSTRIALI
INIZIATIVE INDUSTRIALI S.p.A. Sarplast is a company located in Santa Luce (Pisa, Italy) which has over 35 years experience in the design, manufacturing and supply of Glass-Fiber Reinforced Plastic (GRP)
More information