DRUM MOTOR 113LS 113.5Ø 0.035kW kW, with steel helical gearbox

Transcription

1 0 DRUM MOTOR UNIT HANDLING DRUM MOTOR 11LS 11.5Ø 0.05kW kW, wth steel helcal gearbox Product descrpton Ths drum motor has been desgned specf cally for applcatons that requre a strong drve. Characterstcs Salt water resstant alumnum bearng housng Three phase alternatng current nducton motor -phase dual voltage standard Integral motor protecton Hardened steel helcal gear type Low nose operaton Mantenance free Lfetme lubrcaton Reversble operaton Renforced nternal shaft for RL exceedng 800 mm Applcatons Heavy and frequent use Conveyors Conveyors for check-n at arports Packagng equpment Weghng Machnes Metal detector Pharmaceutcal ndustres Food processng Plastc or modular belt applcatons Dry, damp and wash down applcatons TECHNICAL DATA Motor Data Type of Motor Asynchronous squrrel-cage, IEC (VDE 050) Insulaton class of motor wndn Class F, IEC (VDE 050) Derated wndn (0% power reducton) On request for applcatons wthout belt Voltage 0/00 V ± 5% (IEC /8) sngle voltage Dual voltage or specal voltage on request Frequency 50/60 Hz Internal shaft sealng system Double-lpped of ntrle rubber, NBR Protecton rate IP66 Thermal protecton Bmetallc Contact Ambent temperature, -phase motor General techncal data Max. Roller length (RL) 100 mm -5 C to + 0 C mneral ol -5 C to + 0 C synthetc ol All data and values declared n the catalogue refer to operaton wth a frequency of 50 Hz.

2 11LS SERIES 1 DRUM MOTOR 11LS 11.5Ø 0.05kW kW, wth steel helcal gearbox LIGHT INDUSTRIAL Materals The followng drum motor components are avalable n dfferent versons, as shown n the below chart, wth further optons for the materal type as ndcated. Components Verson Shell End housng Shaft cap Electrcal connecton Please contact Rulmeca for further versons. TS8N Verson - End Caps n stanless steel wth PTFE lp seals. Materal Alumnum Steel Stanless Steel Brass /Nckel Polymer Crowned Std TS8N Cylndrcal Std TS8N Cylndrcal + key (for sprockets) Std TS8N Specal crowns and grooves Std TS8N Standard Std TS8N Wth V-grooves TS8N Wth O-grooves TS8N Standard Cross-drlled and threaded, M6 Straght connector TS8N Std Elbow connector TS8N Std Termnal box Std TS8N Std Std INDUSTRIAL OPTIONS Optons Rubber Laggng for standard belts Prof led laggng for plastc modular belts Prof led laggng for thermoplastc belts Sprockets for plastc modular belts Backstop / Ant run-back bearng Electromagnetc brake Rectf ers Encoder Food-grade Ol (EU, FDA and USDA) Non-horzontal mountng (more than ± 5 ) Dynamcal balancng ACCESSORIES Note The combnaton of encoder and electromagnetc brake s not possble. Accessores Mountng brackets Idler Pulleys Rollers for conveyors Shaft caps Frequency Converters PLANNING SECTION

3 DRUM MOTOR UNIT HANDLING DRUM MOTOR 11LS 11.5Ø 0.05kW kW, wth steel helcal gearbox TECHNICAL DATA DRUM MOTOR 11LS - PHASE - 50HZ - STANDARD RANGE [kw] (rpm) [A] [mn -1 ] [Nm] TE RL (0) 1 (80) 8 (65) 6 (900) 8 (60) (170) 6 (895) 0.88/ / / / / / / mn 50 mn 00 mn 50 mn 00 mn 50 mn 00 rpm Nomnal mechancal power Number of poles Actual rotor rpm at full load Amperage (0/00V) at full load Gear stages Gear rato Theoretcal actual belt (tangental) speed at full load* Nomnal belt (tangental) speed Revolutons of shell at full load* Nomnal Torque at full load Belt pull (tangental force) on shell at full load* TE Maxmum allowable belt tenson (radal load) RL Reference length * Vald for unlagged shells/ values can devate at partly or no load condtons

4 11LS SERIES DRUM MOTOR 11LS 11.5Ø 0.05kW kW, wth steel helcal gearbox [kw] (rpm) (766) (190) (150) (800) (790) [A] 1.1/ / / /0.90.0/1.7 TECHNICAL DATA DRUM MOTOR 11LS - PHASE - 50HZ - STANDARD RANGE [mn -1 ] [Nm] TE RL mn 50 mn 00 mn 00 LIGHT INDUSTRIAL INDUSTRIAL OPTIONS ACCESSORIES PLANNING SECTION

5 DRUM MOTOR UNIT HANDLING DRUM MOTOR 11LS 11.5Ø 0.05kW kW, wth steel helcal gearbox TECHNICAL DATA DRUM MOTOR 11LS - PHASE - 50HZ - DERATED RANGE [kw] (rpm) [A] [mn -1 ] [Nm] TE RL (16) (110) (180) (800) 0.7/0. 1.1/ / / mn 50 mn 00 rpm Nomnal mechancal power Number of poles Actual rotor rpm at full load Amperage (0/00V) at full load Gear stages Gear rato Theoretcal actual belt (tangental) speed at full load* Nomnal belt (tangental) speed Revolutons of shell at full load* Nomnal Torque at full load Belt pull (tangental force) on shell at full load* TE Maxmum allowable belt tenson (radal load) RL Reference length * Vald for unlagged shells/ values can devate at partly or no load condtons

6 11LS SERIES 5 DRUM MOTOR 11LS 11.5Ø 0.05kW kW, wth steel helcal gearbox LIGHT INDUSTRIAL Standard weghts for drum motor 11LS P Standard weght [kg] for standard RL N [kw] IDLER (UT11LS) Cable specfcaton Avalable cable optons: Standard, screened Standard, unscreened Halogen-free, screened Halogen-free, unscreened Avalable lengths: 1//5 m INDUSTRIAL OPTIONS PLANNING SECTION ACCESSORIES Other RL dmenson wthn the mn & max RL avalable on request. Mn. length wth opton The followng optons ncrease the mnmum length of the drum motor Opton RL mn wth opton mm Brake RL mn + 50 mm Encoder SKF RL mn + 0 mm Encoder RLS RL mn +50 mm

7 6 DRUM MOTOR UNIT HANDLING DRUM MOTOR 11LS 11.5Ø 0.05kW kW, wth steel helcal gearbox Drum motor wth straght connector n stanless steel Drum shell shape ØA ØB Crowned Cylndrcal Cylndrcal wth key Shaft dmenson Wdth across flats H K C Ø5mm Ø5mm Drum motor wth key x Standard shaft Shaft cap

8 11LS SERIES 7 DRUM MOTOR 11LS 11.5Ø 0.05kW kW, wth steel helcal gearbox ACCESSORIES PLANNING SECTION OPTIONS LIGHT INDUSTRIAL INDUSTRIAL Elbow connector n stanless steel Elbow connector n polyamde Cable connector 90 wth threaded shaft Cross-drlled and threaded shaft Termnal box n alumnum Termnal box n stanless steel Straght/Elbow connector wth shaft cap n stanless steel Elbow connector wth shaft cap n stanless steel