Cables for I/O Relay Terminals

Size: px

Start display at page:

Download "Cables for I/O Relay Terminals"

Dwayne Melton
6 years ago
Views:

s for I/O Relay s XWZ-R Connect I/O Relay s to I/O Units for Programmable Controllers with one touch.

s available for programmable controllers from Mitsubishi Electric.

for connecting I/O Relay s to devices equipped with screw terminals. This has loose wires at the device end.

s with s (:) 6 I/O points XWZ-R C () Fujitsu connectors Connects a PLC I/O Unit, DeviceNet slave, or other device with Fujitsu connectors : to I/O Relay s.

s with s (:) 8 I/O points XWZ-R C- - 6 (6) Connects a PLC I/O Unit, De-viceNet slave, or other device with MIL connectors : to an I/O Relay.

1 s for I/O Relay s XWZ-R Connect I/O Relay s to I/O Units for Programmable Controllers with one touch. s with s for G70V and G7TC I/O Relay s, G70D and G70R Relay s, and G70A and P7TF-IS/OS I/O Sockets. s with loose wires available with or without crimp terminals. s available for programmable controllers from Mitsubishi Electric. Types and Table of Contents Connects to Appearance Description Name I/O Classification Typical model Wiring diagram Page Number Connections with terminal blocks of various devices This is convenient for connecting I/O Relay s to devices equipped with screw terminals. This has loose wires at the device end. s with Loose Wires and Crimp s s with Loose Wires 6 I/O points XWZ-RY C () 6 I/O points XWZ-RA C () Connects a PLC I/O Unit, DeviceNet slave or other device with Fujitsu connectors : to an I/O Relay. s with s (:) 6 I/O points XWZ-R C () Fujitsu connectors Connects a PLC I/O Unit, DeviceNet slave, or other device with Fujitsu connectors : to I/O Relay s. s with s (:) 5 input points XWZ-RI C- () output points XWZ-RO C- (5) Connects a PLC I/O Unit, DeviceNet slave, or other device with Fujitsu connectors : to I/O Relay s. s with s (:) 8 I/O points XWZ-R C- - 6 (6) Connects a PLC I/O Unit, De-viceNet slave, or other device with MIL connectors : to an I/O Relay. s with s (:) 6 input points/ 6 output points XWZ-RO C (7) 7 XWZ-RI C (8) MIL connectors Connects a PLC I/O Unit, DeviceNet slave, or other device with MIL connectors : to I/O Relay s. s with s (:) input points/ output points XWZ-RO - -D (9) 8 XWZ-RI - -D (0) XWZ-RI - -D () Connects a DeviceNet slave or other device with MIL connectors : to I/O Relay s. 6 input points/ 6 output points ( I/O points) XWZ-RM - -D () 9 XWZ-RM - -D () Mitsubishi Electric PLCs Applicable models: For inputs: AX, ASX, ASX, QX, and QX For outputs: AY, ASY, ASY, QYP, and QYP Connects Mitsubishi Electric PLCs with -point connectors to I/O Relay s through a special cable. Mitsubishi Electric PLC Connecting s (:) input points XWZ-RI C-MN Note: For combinations of Connections, refer to I/O Relay s and Connected Devices (Cat. No. J7) or to the datasheets for related products. 0 () output points XWZ-RO C-MN (5)

2 XWZ-R Ordering Information Type () Name I/O Classification Appearance length L (mm) Models,000 XWZ-RY00C s with Loose Wires,500 XWZ-RY50C Device end I/O Relay and Crimp s 6 I/O points,000 XWZ-RY00C XWZ-RY C,000 XWZ-RY00C Loose wire connections 00 L 5,000 XWZ-RY500C s with Loose Wires XWZ-RA C 6 I/O points 00 L,000 XWZ-RA00C 5,000 XWZ-RA500C,000 XWZ-R00C Fujitsu connectors ( pins) s with s (:) 6 I/O points,500 XWZ-R50C,000 XWZ-R00C XWZ-R C L,000 XWZ-R00C 5,000 XWZ-R500C (A),000 (B) 750 XWZ-RI00C-75 (A),500 (B),50 XWZ-RI50C-5 input points (A) (A),000 (B),750 XWZ-RI00C-75 Fujitsu connectors (0 pins) s with s (:) XWZ-RI C- XWZ-RO C- output points (0) (B) Straight length (without bends) (A),000 (B),750 XWZ-RI00C-75 (A) 5,000 (B),750 XWZ-RI500C-75 (A),000 (B) 750 XWZ-RO00C-75 (A),500 (B),50 XWZ-RO50C-5 (A),000 (B),750 XWZ-RO00C-75 (A),000 (B),750 XWZ-RO00C-75 (A) 5,000 (B),750 XWZ-RO500C-75 (A) (B) (A),500 (B),50 (C),000 XWZ-R50C-5-00 Fujitsu connectors (56 pins) s with s (:) XWZ-R C- - 8 I/O points (0) (70) (A),000 (B),750 (C),500 XWZ-R00C (C) Straight length (without bends) (A),000 (B),750 (C),500 XWZ-R00C MIL connectors (0 pins) s with s (:) XWZ-RO C XWZ-RI C 6 I/O points L 50 XWZ-RO5C 500 XWZ-RO50C 50 XWZ-RI5C 500 XWZ-RI50C

3 XWZ-R Type () Name I/O Classification Appearance length L (mm) Models (A) 500 (B) 50 XWZ-RO50-5-D MIL connectors (0 pins) Mitsubishi Electric PLCs with -point connectors (:) Applicable models: For inputs: AX, ASX, ASX, QX, and QX For outputs: AY, ASY, ASY, QYP, and QYP s with s (:) XWZ-RO - -D, XWZ-RI - -D, XWZ-RI - -D, XWZ-RM - -D*, XWZ-RM - -D* Mitsubishi Electric PLC Connecting s XWZ-RI C- -MN XWZ-RO C- -MN I/O points 6 inputs and 6 outputs ( I/O points) input points output points Device end Note: For a connector pin assignment diagram and cable color information, refer to the wiring drawings. * These cables are used to connect to slave products for DeviceNet and other networks. (0) (B) Straight length (without bends) (0) I/O Relay (A) (A) (B) Straight length (without bends) (A) 750 (B) 500 XWZ-RO75-50-D (A),000 (B) 750 XWZ-RO00-75-D (A),500 (B),50 XWZ-RO50-5-D (A),000 (B),750 XWZ-RO00-75-D (A),000 (B),750 XWZ-RO00-75-D (A) 5,000 (B),750 XWZ-RO D (A) 500 (B) 50 XWZ-RI50-5-D (A) 750 (B) 500 XWZ-RI75-50-D (A),000 (B) 750 XWZ-RI00-75-D (A),500 (B),50 XWZ-RI50-5-D (A),000 (B),750 XWZ-RI00-75-D (A),000 (B),750 XWZ-RI00-75-D (A) 5,000 (B),750 XWZ-RI D (A) 500 (B) 50 XWZ-RI50-5-D (A) 750 (B) 500 XWZ-RI75-50-D (A) 500 (B) 50 XWZ-RM50-5-D (A) 750 (B) 500 XWZ-RM75-50-D (A),000 (B) 750 XWZ-RM00-75-D (A),500 (B),50 XWZ-RM50-5-D (A),000 (B),750 XWZ-RM00-75-D (A),000 (B),750 XWZ-RM00-75-D (A) 5,000 (B),750 XWZ-RM D (A) 500 (B) 50 XWZ-RM50-5-D (A) 750 (B) 500 XWZ-RM75-50-D (A),000 (B) 750 XWZ-RI00C-75-MN (A),500 (B),50 XWZ-RI50C-5-MN (A),000 (B),750 XWZ-RI00C-75-MN (A),000 (B),750 XWZ-RI00C-75-MN (A),000 (B) 750 XWZ-RO00C-75-MN (A),500 (B),50 XWZ-RO50C-5-MN (A),000 (B),750 XWZ-RO00C-75-MN (A),000 (B),750 XWZ-RO00C-75-MN

4 XWZ-R Wiring diagram For various devices () s with Loose Wires and Crimp s (6 I/O points) XWZ-RY C Marker Insulation G70V/G7TC connec- Corresponding Dot Dot CN tube mark color Pin No. No. * color tor pin number* 0 BLUE RED 0 0 BLUE BLACK 0 9 PINK RED 9 9 PINK BLACK 9 8 GREEN RED GREEN BLACK ORANGE RED ORANGE BLACK GRAY RED GRAY BLACK BLUE RED 5 5 BLUE BLACK 5 PINK RED PINK BLACK GREEN RED 5 GREEN BLACK 6 ORANGE RED 7 ORANGE BLACK 8 GRAY RED 9 GRAY BLACK 0 *. Marker tube numbers and the G70V and G7TC connector pin numbers are same. Be careful when using with other models (Relay s). Refer to the datasheet for specific products for details. *. Refer to the datasheets for the G70V and G7TC for the connector pin layouts of I/O Relay s. () s with Loose Wires (6 I/O points) XWZ-RA C Corresponding Insulation CN Pin Dot mark Dot color G70V/G7TC connector pin number* color No. ORANGE BLACK 0 ORANGE RED 9 GRAY BLACK 8 GRAY RED 7 WHITE BLACK 6 WHITE RED 5 YELLOW BLACK YELLOW RED PINK BLACK 5 PINK RED 5 ORANGE BLACK 0 6 ORANGE RED 9 6 GRAY BLACK 8 7 GRAY RED 7 7 WHITE BLACK 6 8 WHITE RED 5 8 YELLOW BLACK 9 YELLOW RED 9 PINK BLACK 0 PINK RED 0 * Refer to the datasheets for the G70V and G7TC for the connector pin layouts of I/O Relay s Loose Wires and Crimp s (fork terminal (.5-)) XGM-00-T (MIL connector) UL6 BC0P-SB AWG8(7/0.7) Interface cable ( color: Gray) Note:. The power line capacity is 50 ma max. per I/O point. Also, always check the driver capacity and I/O relay power consumption when using for outputs.. The crimp terminals are labeled with the corresponding connector pin numbers in parentheses. Refer to the Pin No. Tables for marker tube numbers.. Connect terminals 9 and 9 and terminals 0 and 0 together when using the G7TC-OC08.. The wire gauge of the wires in the cable is 8 AWG (7/ 0.7). Loose Wires XG5M-0-N XG5S-0 (MIL connector) UL6 BC0P-SB AWG(7/0.0) Interface cable ( color: Black) Note:. The wire gauge of the wires in the cable is AWG (7/0.0).. Connect terminals 9 and 9 and terminals 0 and 0 together when using the G7TC-OC08.

5 XWZ-R For Fujitsu connectors () s with s (:) (6 I/O points) XWZ-R C CN CN CN A 0 B 9 A 8 B 7 A 6 B 5 A B 5A 5B 6A 0 6B 9 7A 8 7B 7 8A 6 8B 5 9A 9B 0A 0B A B A B A B CN 9 CN CN 0 () s with s (:) ( I/O points) XWZ-RI C- CN CN CN A B A B A B A --- B --- 5A --- 5B --- 6A B A B A B A --- 9B --- 0A B A B A B A --- B --- A --- B --- 5A B A B A B A --- 8B --- 9A 9B 0A 0B CN (5) s with s (:) ( I/O points) XWZ-RO C- CN CN CN A B A B A B A --- B --- 5A --- 5B --- 6A B A B A B A --- 9B --- 0A --- 0B --- A B A B A B A --- B --- 5A --- 5B --- 6A B A B A B A --- 9B --- 0A --- 0B --- Tube CN FCN-67J0-AU/F * XGM-00-T (MIL connector) UL6 BC0P-SB AWG8(7/ 0.7) Interface cable ( color: Gray) * The connector is made by Fujitsu Component Ltd. CN A B CN CN and CN FCN-67J00-AU/FW * XGM-00-T (MIL connector) UL6 BC0P-SB AWG8(7/0.7) Interface cable color: Gray Tube color: XWZ-RI@C-@ CN, CN: Red XWZ-RO@C-@ CN, CN: Yellow * The connector is made by Fujitsu Component Ltd. 5

6 XWZ-R For Fujitsu connectors (6) s with s (:) (8 I/O points) XWZ-R C- - CN CN CN CN A B A B A B A B A B A B A B A B A B A B A B A B A B A B A B A B A B A B A B A B A B A B A B A B A B A B A B A 8B CN 8 A Tube B CN 8 FCN-67J056-AU/FW* XGM-00-T (MIL connector) UL6 BC0P-SB AWG8(7/0.7) Interface cable color: Gray Tube color: CN, CN, CN: Black CN * The connector is made by Fujitsu Component Ltd. 9 CN 0 CN CN, CN, and CN 6

7 XWZ-R For MIL connectors (7) s with s (:) (6 I/O points) XWZ-RO C CN CN (8) s with s (:) (6 I/O points) XWZ-RI C CN CN CN CN 9 0 CN and CN XGM-00-T (MIL connector) XGM-00-T (MIL connector) UL6 BC0P-SB AWG8(7/0.7) Interface cable ( color: Gray) 7

8 XWZ-R For MIL connectors (9) s with s (:) ( I/O points) XWZ-RO - -D CN CN CN (0) s with s (:) ( I/O points) XWZ-RI - -D CN CN CN () s with s (:) ( I/O points) XWZ-RI - -D CN CN CN CN Tube CN mch * CN m+ch * * For the XWZ-RI/O - -D XGM-00-T (MIL connector) XGM-00-T (MIL connector) UL6 BC0P-SB AWG8(7/0.7) Interface cable color: Gray Tube color: XWZ-RO@-@-D CN, CN: Yellow XWZ-RI@-@-D/D CN, CN: Red 8 CN CN and CN

9 XWZ-R For MIL connectors () s with s (:) (6 input points/6 output points) XWZ-RM - -D CN CN CN () s with s (:) (6 input points/6 output points) XWZ-RM - -D CN CN CN CN Tube CN CN XGM-00-T (MIL connector) XGM-00-T (MIL connector) CN CN and CN UL6 BC0P-SB AWG8(7/0.7) Interface cable color: Gray Tube color: XWZ-RM@-@-D XWZ-RM@-@-D CN: Red, CN: Yellow CN: Yellow, CN: Red 9

10 XWZ-R For Mitsubishi Electric PLCs () Mitsubishi Electric PLC Connecting s (:) ( input points) XWZ-RI C-MN CN CN CN A B --- A B --- A B A B 5A B A B A B A --- 8B --- 9A --- 9B --- 0A B A B A B A B A B A B A --- 6B --- 7A --- 7B --- 8A B A B A B Note: The G70V or G7TC connector pin numbers are not the same as the XWZ-R connector pin numbers. Refer to the datasheet for specific products for details. CN CN Tube (5) Mitsubishi Electric PLC Connecting s (:) ( output points) XWZ-RO C-MN CN CN CN A --- B --- A --- B --- A B A B 5A B A B A B A --- 8B --- 9A --- 9B --- 0A B A B A B A B A B A B A --- 6B --- 7A --- 7B --- 8A B A B A B Note: The G70V or G7TC connector pin numbers are not the same as the XWZ-R connector pin numbers. Refer to the datasheet for specific products for details. CN 0 A B FCN-67J00-AU/FW* XGM-00-T (MIL connector) CN CN and CN UL6 BC0P-SB AWG8(7/0.7) Interface cable color: Gray Tube color: XWZ-RI@C-MN CN, CN: Gray XWZ-RO@C-MN CN, CN: Black * The connector is made by Fujitsu Component Ltd. 0

11 XWZ-R Ratings and Specifications Rated current A Rated voltage 50 V Contact resistance 0 mω max. (at 0 mv, 00 ma max.) * Insulation resistance,000 MΩ min. (at 500 VDC) * Dielectric strength 500 VAC for min (leakage current: ma max.) Ambient operating temperature 0 to 80 C * These values are for the connectors. Safety Precautions Be sure to read Safety Precautions for All I/O Relay s in the website at: Warning Indications Precautions for Correct Use Supplementary comments on what to do or avoid doing, to prevent failure to operate, malfunction, or undesirable effects on product performance. Precautions for Correct Use Wiring Do not perform wiring work, remove connectors, or connect connectors while power is being supplied. Electric shock or damage to the device may result. Double-check all wiring before turning ON the power supply. After wiring, route the cable so that force is not applied directly to the connections. Bending Radius of Connecting s To prevent damaging the Connecting s, use the following minimum bending radii as guidelines. Minimum bending radius Wiring diagram No. Model Minimum bending radius (mm) () XWZ-RY C 68 () XWZ-RA C 50 () XWZ-R C 68 () XWZ-RI C- (5) XWZ-RO C- 88 (6) XWZ-R C (7) XWZ-RO C (8) XWZ-RI C 68 (9) XWZ-RO - -D (0) XWZ-RI - -D () XWZ-RI - -D () XWZ-RM - -D 88 () XWZ-RM - -D () XWZ-RI C- -MN (5) XWZ-RO C- -MN Refer to the manuals for the connected PLC for the connections to I/O Units for OMRON PLCs. Series Model Man. No. Manual Name CS CSG-CPU H, CSH-CPU H W9 Programmable Controllers Operation Manual CJ CJH-CPU H-R, CJG/H-CPU H, CJG- CPU P, CJM-CPU, CJG-CPU W9 CJ Series Programmable Controllers Operation Manual CJ CJH-CPU6 -EIP, CJH-CPU6, CJM-CPU W7 CJ-series CJ CPU Unit Hardware User s Manual NJ NJ50- W500 NJ-series CPU Unit Hardware User's Manual NX NX-ID, NX-IA, NX-OD, NX-OC, NX-MD W5 NX-series Digital I/O Units User s Manual

12 MEMO

13 Terms and Conditions Agreement Read and understand this catalog. Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranties. (a) Exclusive Warranty. Omron s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron s sole obligation hereunder shall be, at Omron s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron s analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See or contact your Omron representative for published information. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, IIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGEE OR STRICT LIABILITY. Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. Suitability of Use. Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer s application or use of the Product. At Buyer s request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer s application, product or system. Buyer shall take application responsibility in all cases. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. Programmable Products. Omron Companies shall not be responsible for the user s programming of a programmable Product, or any consequence thereof. Performance Data. Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron s test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron s Warranty and Limitations of Liability. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron s representative at any time to confirm actual specifications of purchased Product. Errors and Omissions. Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions.

14 OMRON AUTOMATION AMERICAS HEADQUARTERS Chicago, IL USA OMRON CANADA, I. HEAD OFFICE Toronto, ON, Canada OMRON ELECTRONICS DE MEXICO HEAD OFFICE México DF OMRON ELECTRONICS DE MEXICO SALES OFFICE Apodaca, N.L OMRON ARGENTINA SALES OFFICE Cono Sur OMRON CHILE SALES OFFICE Santiago OTHER OMRON LATIN AMERICA SALES OMRON ELETRÔNICA DO BRASIL LTDA HEAD OFFICE São Paulo, SP, Brasil OMRON EUROPE B.V. Wegalaan 67-69, NL- JD, Hoofddorp, The Netherlands. + (0) Authorized Distributor: Controllers & I/O Machine Automation Controllers (MAC) Motion Controllers Programmable Logic Controllers (PLC) Temperature Controllers Remote I/O Robotics Industrial Robots Mobile Robots Operator Interfaces Human Machine Interface (HMI) Motion & Drives Machine Automation Controllers (MAC) Motion Controllers Servo Systems Frequency Inverters Vision, Measurement & Identification Vision Sensors & Systems Measurement Sensors Auto Identification Systems Sensing Photoelectric Sensors Fiber-Optic Sensors Proximity Sensors Rotary Encoders Ultrasonic Sensors Safety Safety Light Curtains Safety Laser Scanners Programmable Safety Systems Safety Mats and Edges Safety Door Switches Emergency Stop Devices Safety Switches & Operator Controls Safety Monitoring/Force-guided Relays Control Components Power Supplies Timers Counters Programmable Relays Digital Panel Meters Monitoring Products Switches & Relays Limit Switches Pushbutton Switches Electromechanical Relays Solid State Relays Software Programming & Configuration Runtime G6-E-0 0/7 Note: Specifications are subject to change. 07 Omron. All Rights Reserved. Printed in U.S.A. Printed on recycled paper.

Cables for I/O Relay Terminals

Cables for I/O Relay Terminals s for I/O Relay s XWZ-R Connect I/O Relay s to I/O Units for Programmable Controllers with one touch. for G70V and G7TC I/O Relay s and G70D, G70A, and G70R Relay s. s with loose wires available with or