ca :l)c-{)1~ ~~~'l ','... CND-II CMD/16: 111sg((Jcu:fI) 19 sq,-.(){ -OJ Title:- Vault Csk~ 1\~)~

Size: px
Start display at page:

Download "ca :l)c-{)1~ ~~~'l ','... CND-II CMD/16: 111sg((Jcu:fI) 19 sq,-.(){ -OJ Title:- Vault Csk~ 1\~)~"

Transcription

1 -- - ~ BUREAUQE NDAN STANDARDS CND- Our Subject: Ref: CMD/16: 111sg((Jcu:f) ST f or,s.n 1frgCPo-'-J- J: '~q, Title:- Vault Csk~ 1\~)~ 19 sq,-.(){ -OJ The.Scheme of Testing and nspecti on f or S 1 \l8'g(~.:sj. i;. for... V,\-J...t:..~~.\?.!'?-:--J..~~ : ',' '1' has been Final ized/re~d as per Doc: ST/.U:g//, of :r!-<h~.... ' 199<{. A copy of the same. is enc osed. The ffinalized/r~ed Document of.st.stated above would come intp ~. v(~ '\ l W1~~~.Je ejj~:>j ~ orce...rom,',;...t?-;/(d'~' ~ Enel: as above' :l)c-{)1~ ~~~'l Circulated to All ROs/BOs/Os ca. ( C.K. Veda) Addl.DirectorCCentral Mary.s) L-~ ~ -- L 1..

2 ., ) SCHEME OF TESTNG AND NSPECTON FOR CERTFCATON OF VAULT (STRONG ROOr-1) DOORS ACCORDNG TO S 11188(PART 1):1991 (ncorporating Amendment No.1 to 3) DOC:ST/11188/1 June 99 1 LABORATORY 7 A laboratory shall be maintained which shall be suitably equipped and staffed, where different tests given in the specification shall be carried out in accordance 'with the methods given in the specification. 1.1 All testing ~pparatus shall be periodically checked and calibrated and records of such checks/calibration shall be' maintained. 2.0 TEST RECORDS - All records of tests and _inspection shall be kept in suitable forms approved by the Bure'au. 2.1 Copies of any records and other connected papers that may be required by the Bureau shall be made available-at any time on request. 3.0 QUALTY CONTROL - t is recommended that, as far as possible~ Statistical Quality Control (SQ.) methods may be used for controlling the quality of the product during production as envisaged in this Scheme [See S 397 {Part 1):1972, S 397 (Part 2):1985 and S 397 (Part 3):1980]. 3.1 n addition. effort should be made to gradually introduce a Quality Management System in accordance with the Quality System modules as per s/so 9001 or S/SO 9002 or S/SO as appropriate to the activities of the organization. 4.0 STANDARD MARK: The Standard Mark as given in Column 1 of the First Schedule of the licence-shall be appl ied on the name plate of each Vault (Strong Room) Door. provided that each door on which this mark is applied conforms to every reqirements of the specification. 5.0 ~~RKNG - n addition. the following information shall be furnished on the metalic name plate affixed to each Vault (Strong Room) Door. a) The manufacturers name and its a~;. b) r) Classpnd classification code; ~- Year of manufacture,-; -:-:' d) Serial Nlliuber;~ e) Licence No. (CM/L No.). -,.J.. recognized trade mark if..

3 ) DOC:ST/11188/1 June MARKNG ON KEYS - The keys supplied with Vault (Strong Room) Door shall be marked with an i~entification number di~ferent from serial number of. the Door LEVEL':: OF.CONTROL - The tests and inspectionindicatedin Table 1 attached apd at the levels of control specified therein. shall be carried out on the whole production which is covered by this scheme and appropriate records and charts maintained in accordance with paragraph 2 above. All the production which conforms to the ndian Standard and covered Qy the licence shall be marked with the Certification Mark of the Bureau. 6.1 The manufacturer shall provide full details for installation of door to the purchaser as per clause 13 ~f S (pt 1): n respect of all other clauses of the specification and at all stages of manufacture. the factory shall maintain appropriate c(mtrc.ls and checl:s to ensure that the product conforms to the voxious requirements of the specification. 8.0 RAW r.111.terj.ls - The different parts of Vault (Strong Room) Dc.orsshall be manufactured from materials specifiedin Table 2 of S (Part 1):1991.Manufacturer shall ensure the confolulity to relevant standards and appropriate records shall be maintained SA~E1:g~ - The licensee sha 11 supp y. free of charge, the samples required in accordance \~ith the Bureau of ndian Standards (Certification) Regulations as subsequently a::nended.from the factory or godowns. The Bureau shall pay for the samples taken by it from the open market.,., ' R:gPLf:::;;:Ef.1EN - Vlheneve.r a complaint is received soon after the goods with Standard Mark have been purchased and used. and if. there is adequate evidence that the goods have not been misused, defective goods are replaced free of cost by the licensee in case the complaint is proved te,be genuine and the V'iarrantyperiod (-;'7here applicable) has not expired. The final authority to judge the conformity of the product to the ndian standard shall be with the Bureau n the event of any damages caused by the goods bearing the Standr-ird1.1ark.or claim being filed by the <;onsumers against BS Stando.rd r.~a.rk and not conforming te, the relevanl ndian Sta.ndard, entire liability arising out of such non conforming product shall be of the licensee and BS shall not in any way be responsible in such cases. :2 -

4 </ '., ') DOC:ST/11188/1 June ~:U:::PEr~S:ON OF r.1ahkng - The marking of the product shall be stopped under intimation to the Bureau if. at any time. there is any difficu~ty in maintaining the conformity of their product to the spbcification,' or the testing equipment goes out of order. The marking may be resumed as soon as the defects are removed under intimation to Bureau. The marking of the product shall be stopped iu~ediately if directed to do so by Bureau for any reason. The marking may then be resumed only after permission by the Bureau. The information regarding resu:.llption(a markings shall' also be sent to the Dun:: au PHODUCTON Df.TA- The 1icensee shall send to BS as per the' encle-sed profonna-1 to be authenticated by a Chartered ]..ccountan,t a statement of quantity produced, marked and exported by him and the trade value thereof at the end of each operative year of the licence. Table...1 :3 -

5 ,[ ',. S 1113H{PU):1991 ViiU]t (Strong Roo]:)P.oOr5 TABLE1 LEVELSOf CONTROL (Clause6.0of theschmof Testingandnspection) DOC:m/l11a~ June99 ~ TEST DETALS : LEVELSOFCONTROL '-,-, :>!, -~ : Test ~ th0-i v. V1 :$pecim: LotSize Clause: BeqEire:ents CliHlse : ReieH,!!:;e p, \'\~/,;>~ 5 DiEensions 5, Table1 S Eachdoor rt,ad.i th (Part1):91 fig 1 6 Materia!s 6. Talle2 -dof.. v::c Eachconsignient Xo testingis requiredif He iaterials is carryingthebs larkor lanufactun:rs certificate of confor!ityis availatle 8 Construction& C> neral 3.1 to -do- Eachdoor reqeireeents Do;:'r fittie!js 9.1to -do- EtH:hdoor 10 Finish 10.1to -do- Eachdoor, 1U 11 Ti;:ithg&critHia 11.1) -do- One Simple in Thesetestsm considered as for confor;;hy 11.2) 2 years typetest andshall be carried -BiirglaryResistance S 1118B{P.2J out for initial approvalof -Fire Endurance S 11188!P. 3) -do- the designor at any 5ub- S 111D3(P.3} -do- sfqu ntchanges in thedesign. n caseof no changețhese shall lie conducted oncein ti10 yearsso that!1tire mge is coveredom a period of ti!e. 1'1 1f.!fading- 12 to 12.2 S Eachdc.or (rart-!) :91 13 nstallation 13 -do- Eachdo-3r,,-- ---, , - ' ~ Profom -, 4..

6 '} p,f<-ofozmj\,.l ~ ' ''',..j ~- CM/PP 604 ' q,, PHOFORrVA FOR OBTANNG PRODUCTON DETALS,Period to be covcrc() \)y thc Hcport being to )* i~ame of Licensee :::M/L'No. -,J;lllCof Articlcs(s) /micty/classl ),,atmg S No. GracJeri'ypc/Sizc,.1 Brandn'rade/Name(s) of 3S Cenification Marked Products Total production of the Hrlic!c(s) licensed for ccrtification marking ', Toted production of the article(s) conforming to ndian Standard Production covered with 13S Ccrtif'ication Mark and its approximate value' a) Quantity b) Value Rs. 1, l J Brand Name used on production covered unger BS Certification Mark CaJculation of markiug fee on ul1it-rt1tc basis: lvarkiljg fee pc' unit, a) Unit b) Quantity covered with DS Certification 1\1ark nco'matiol1 to bc fi]]cd up by DO bcfore Corwnrding to the liccnsee. ;te: ncasc a clausc is not applicable, suitabjc rcmarks l1'wy bc givcn against it.... r-

7 , j 1 1,,, ~,. : il 11 c) Marking fee rounded off in J :1 :1 whole rupees as obtailjcd by applying uljit rates given in (a) on quantily given in (b) 4. Quanlity not covered will1ljls Certification,Mark. f any, and the reasons for sllch non-coverage ',... ','1, '.. l ','; t,, :: :!~'. 4.1 Brand Name under which non certified goods were sold t 5. i..... ''''-! 5.1 G. Quantity Exported with BlS Stand,u'd Mmk and its value Brand Name under which DS Certified goods are exported Aull1Cnlicalion by Chwtercd Accountant ' ' ',.'-,h ' 'i,:',.' ;,., /, '. ',, i ;,, ' :i <,',/ / -'0..e' \., :,..,, ),

STI /15392 /1 April, 2009

STI /15392 /1 April, 2009 CENTRAL MARKS DEPARTMENT-III Our Ref : CMD-III/16:15392 30 04 2009 Subject : Finalized STI as per IS 15392 : 2003 Aluminium and Aluminium Alloy Bare Foil Food Packaging The Scheme of Testing and Inspection

More information

BUREAU OF INDIAN STANDARDS (Central Marks Department - III) Our Ref : CMD-III/16: Oct 2006

BUREAU OF INDIAN STANDARDS (Central Marks Department - III) Our Ref : CMD-III/16: Oct 2006 BUREAU OF INDIAN STANDARDS (Central Marks Department - III) Our Ref : CMD-III/16:8156 18 Oct 2006 Subject : SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF FASTENERS FOR CONSUMER GOODS SYNTHETIC

More information

SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF GALVANIZED STEEL BARBED WIRE FOR FENCING ACCORDING ACCORDING TO IS 278:2009 (Fourth Revision)

SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF GALVANIZED STEEL BARBED WIRE FOR FENCING ACCORDING ACCORDING TO IS 278:2009 (Fourth Revision) SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF GALVANIZED STEEL BARBED WIRE FOR FENCING ACCORDING ACCORDING TO (Fourth Revision) DOC: STI/278/, 1 LABORATORY - A laboratory shall be maintained which

More information

2. TEST RECORDS - All records of tests, inspection and calibration shall be kept in suitable forms approved by the Bureau.

2. TEST RECORDS - All records of tests, inspection and calibration shall be kept in suitable forms approved by the Bureau. SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF HAND-OPERATED CHAIN PULLEY BLOCKS ACCORDING TO IS 3832:2005 (Third Revision) (Incorporating Amendment No. 1) DOC:STI:3832/3 1. LABORATORY A laboratory

More information

SCHEME OF TESTING AND INSPECTION CERTIFICATION OF PHOSPHORIC ACID, FOOD GRADE ACCORDING TO IS 10508:1983

SCHEME OF TESTING AND INSPECTION CERTIFICATION OF PHOSPHORIC ACID, FOOD GRADE ACCORDING TO IS 10508:1983 SCHEME OF TESTING AND INSPECTION CERTIFICATION OF PHOSPHORIC ACID, FOOD GRADE ACCORDING TO IS 10508:1983 1. Laboratory - A laboratory shall be maintained which shall be suitably equipped and staffed to

More information

1.1 All testing apparatus shall be periodically checked and calibrated. Records of such checks/calibration shall be maintained.

1.1 All testing apparatus shall be periodically checked and calibrated. Records of such checks/calibration shall be maintained. SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF SINGLE PHASE a.c. INDUCTION MOTORS FOR GENERAL PURPOSE ACCORDING TO IS 996:2009 (Including Amendment No.1) 1. LABORATORY A laboratory shall be maintained

More information

Doc: STI/1223(Section-2)/5 Oct 2003

Doc: STI/1223(Section-2)/5 Oct 2003 SCHEME OF TESTING AND INSPECTION FOR CERIFICATION OF APPARATUS FOR DETERMINATION OF MILK FAT BY GERBER METHOD ACCORDING TO IS 1223:2001 (Third Revision) SECTION 2 - STOPPERS 1. LABORATORY- A laboratory

More information

1.1 All testing apparatus shall be periodically checked and calibrated records of such checks/calibration shall be maintained.

1.1 All testing apparatus shall be periodically checked and calibrated records of such checks/calibration shall be maintained. DOC: STI//1 SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF ACCORDING TO IS/IEC:2003 1. LABORATORY A laboratory shall be maintained which shall be suitably equipped and staffed, where different tests

More information

SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF ALLUMINIUM ALLOY TUBES FOR IRRIGATION PURPOSES; WELDED TUBES ACCORDING TO IS: 7092 (PART I)-1992

SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF ALLUMINIUM ALLOY TUBES FOR IRRIGATION PURPOSES; WELDED TUBES ACCORDING TO IS: 7092 (PART I)-1992 SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF ALLUMINIUM ALLOY TUBES FOR IRRIGATION PURPOSES; WELDED TUBES ACCORDING TO IS: 7092 (PART I)-1992 1. LABORATORY: A laboratory shall be maintained which

More information

SCHEME OF TESTING AND INSPECTION FOR CERTIFICAATION OF VENEERED DECORATIVE PLYWOOD ACCORDING TO IS 1328:1996 (Third Revision)

SCHEME OF TESTING AND INSPECTION FOR CERTIFICAATION OF VENEERED DECORATIVE PLYWOOD ACCORDING TO IS 1328:1996 (Third Revision) SCHEME OF TESTING AND INSPECTION FOR CERTIFICAATION OF VENEERED DECORATIVE PLYWOOD ACCORDING TO IS 1328:1996 (Third Revision) DOC:STI/1328/4 1. LABORATORY -A laboratory shall be maintained which shall

More information

BUREAU OF INDIAN STANDARDS CENTRAL MARKS DEPARTMENT-III

BUREAU OF INDIAN STANDARDS CENTRAL MARKS DEPARTMENT-III BUREAU OF INDIAN STANDARDS CENTRAL MARKS DEPARTMENT-III Our Ref: CMD-III/16:814 31 January 2006 Subject: Implementation of Amendment No 1 to IS 814:2004 for Covered Electrodes For Manual Metal Arc Welding

More information

BUREAU OF INDIAN STANDARDS (Central Marks Department-III) Our Ref : CMD-III/16: October 2008

BUREAU OF INDIAN STANDARDS (Central Marks Department-III) Our Ref : CMD-III/16: October 2008 BUREAU OF INDIAN STANDARDS (Central Marks Department-III) Our Ref : CMD-III/16:14587 15 October 2008 Subject : REVISED SCHEME OF TESTING AND INSPECTION FOR PRELAMINATED MEDIUM FIBRE DENSITY BOARDS AS PER

More information

SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF RESPIRATORY PROTECTIVE DEVICES FULL FACE MASKS ACCORDING TO IS 14166:1994

SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF RESPIRATORY PROTECTIVE DEVICES FULL FACE MASKS ACCORDING TO IS 14166:1994 SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF RESPIRATORY PROTECTIVE DEVICES FULL FACE MASKS ACCORDING TO IS 14166:1994 1.0 Laboratory A laboratory shall be maintained, which shall be suitably

More information

2. Test Record - All records of analysis and tests shall be kept in suitable forms approved by the Bureau of Indian Standards.

2. Test Record - All records of analysis and tests shall be kept in suitable forms approved by the Bureau of Indian Standards. SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF SALT AND REFINED IODIZED SALT, VACUUM EVAPORATED IODIZED ACCORDING TO IS 7224:2006 (Second Revision) Doc: STI/7224/5 1. Laboratory - A laboratory shall

More information

BUREAU OF INDIAN STANDARDS CENTRAL MARKS DEPARTMENT-III

BUREAU OF INDIAN STANDARDS CENTRAL MARKS DEPARTMENT-III BUREAU OF INDIAN STANDARDS CENTRAL MARKS DEPARTMENT-III Our Ref: CMD-III/16:2556 13 April 2005 Subject: Implementation revised STI Doc: STI/2556/6,, pertaining to IS 2556 (Part-1 to 17 excluding withdrawn

More information

CENTRAL MARKS DEPARTMENT (FCT) Ref: CMD-II/16:

CENTRAL MARKS DEPARTMENT (FCT) Ref: CMD-II/16: CENTRAL MARKS DEPARTMENT (FCT) Ref: CMD-II/16:15489 20 03 2014 Subject: Implementation of revised STI for IS 15489 :2013 for Paint Plastic Emulsion - Specification 1. Indian Standard Specification for

More information

CENTRAL MARKS DEPARTMENT-3. Our Ref: CMD-3/16: Subject: STI as per IS 13714: 1993 DUNNAGE PALLETS-WAREHOUSING

CENTRAL MARKS DEPARTMENT-3. Our Ref: CMD-3/16: Subject: STI as per IS 13714: 1993 DUNNAGE PALLETS-WAREHOUSING क द र ह व भ ग 3 द भ- क द र ह व भ ग -3/ 16: आई ए 13714 06.09. 2016 ग ह- आई ए 13714 : 1993 क ल ए ए ट आई आई ए 13714 : 1993 ल भ र (ड ज) प ट भ ड र ग़ क ल ए पर षण और ल ररषण य ज क य वय क ल ए ष ल य क य य एश ष ख

More information

SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF PLASTIC FEEDING BOTTLES ACCORDING TO IS : 1999 (Incorporating Amendment No.

SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF PLASTIC FEEDING BOTTLES ACCORDING TO IS : 1999 (Incorporating Amendment No. SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF PLASTIC FEEDING BOTTLES ACCORDING TO IS 14625 : 1999 (Incorporating Amendment No. 1,2 3 & 4).Doc: STI/14625/3 1.0 LABORATORY- A laboratory shall be

More information

Doc: STI/1166/6 July 2008

Doc: STI/1166/6 July 2008 SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF CONDENSED MILK, PARTLY SKIMMED AND SKIMMED CONDENSED MILK ACCORDING TO IS 1166:1986 (Incorporating Amendment No. 1, 2 & 3) 1. Laboratory - A laboratory

More information

1.1 All testing apparatus shall be periodically checked and calibrated and records of such checks/calibration shall be maintained.

1.1 All testing apparatus shall be periodically checked and calibrated and records of such checks/calibration shall be maintained. SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF DECORATIVE THERMOSETTING SYNTHETIC RESIN BONDED LAMINATED SHEETS ACCORDING TO IS 2046:1995 (First Revision) 1. LABORATORY: A laboratory shall be maintained

More information

SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF TITANIUM DIOXIDE, ANATASE, FOR PAINTS ACCORDING TO IS :

SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF TITANIUM DIOXIDE, ANATASE, FOR PAINTS ACCORDING TO IS : SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF TITANIUM DIOXIDE, ANATASE, FOR PAINTS ACCORDING TO IS : 411-1991 Doc. STI 411/3. November 1994 1 Laboratory A laboratory shall be maintained, which

More information

(अन भ ग अध क र ) (स ए ड -3)

(अन भ ग अध क र ) (स ए ड -3) क द र ह व भ ग 3 स द भ- क द र ह व भ ग -3/16: आई एस 15511 17 भ 2016 ग षह- आई एस 15511:2004 स ईककल ज ज भ एस.ट.आई क क ह भद ह सषम अध क र व र स लगन एस.ट.आई क अन म दन कर ददय गय ह यह सभ क रय ग ह त ह आई एस 15511:2004

More information

(ड चद र ) ञ न क ई (स ए ड -3)

(ड चद र ) ञ न क ई (स ए ड -3) क द र ह व भ ग 3 स द भ- क द र ह व भ ग -3/ 16: आई एस 14561 14 द स बर 2015 ग षह- स श ध त आई एस 14561 क एस.ट.आई क क ह भद ह त यह स च त क य ज त ह क आई एस 14561 क एस.ट.आई स श च त ज ह और सषम र च र आ श न स र इस

More information

2. Test Records - All records of analysis and tests shall be kept in suitable forms approved by the Bureau of Indian Standards.

2. Test Records - All records of analysis and tests shall be kept in suitable forms approved by the Bureau of Indian Standards. Doc. STI 1848/6 January 1995 SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF WRITING AND PRINTING PAPERS ACCORDING TO IS : 1848-1991 (Third Revision) (Amendment No.1 OF September 1993) 1. Laboratory

More information

CENTRAL MARKS DEPARTMENT-2

CENTRAL MARKS DEPARTMENT-2 क य म हर वभ ग 2 हम र स दभ: स एमड 2/16: 7903 26 07 2016 वषय: आई एस 7903:2011 द- उ$च घन(व प लइथलन ब न कपड़ स बन 0तरप ल. 3 4प एसटआई स 7य /7903/4, ज ल ई 2016 अ>ययन क?लए स ल@न ह तदन स र सभ श ख ओ स अन र ध ह Hक

More information

स ल न प ए, (द सर स श धन) (स श धन 1 स 6 श "मल)

स ल न प ए, (द सर स श धन) (स श धन 1 स 6 श मल) क य म हर वभ ग 2 हम र स दभ: स एमड 2/16:7123 16 12 2015 वषय : परण और नरण क# य जन, एसटआई Doc:STI/7123/4 *दस बर 2015 क श त ल क 0लए आई एस 7123:1993 क 2प म3 क पय स लन प ए, परण और नरण क# य जन, एसटआई Doc:STI/7123/4

More information

2. TEST RECORDS: All records of tests and analysis shall be kept in suitable forms approved by the Bureau.

2. TEST RECORDS: All records of tests and analysis shall be kept in suitable forms approved by the Bureau. SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF CARBON STEEL BILLETS, BLOOMS, SLABS AND BARS FOR FORGINGS ACCORDING TO IS:1875-1992 (Fifth Revision) 1. LABORATORY: A laboratory shall be maintained

More information

ALUMINIUM CONDUCTORS FOR OVERHEAD TRANSMISSION PURPOSES

ALUMINIUM CONDUCTORS FOR OVERHEAD TRANSMISSION PURPOSES DRAFT Doc No.: SM/IS 398 (Pt.1) PRODUCT MANUAL FOR ALUMINIUM CONDUCTORS FOR OVERHEAD TRANSMISSION PURPOSES PART 1 ALUMINIUM STRANDED CONDUCTORS ACCORDING TO IS 398 (Part 1):1996 (with Amendment No.01 APR

More information

SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF MALT EXTRACT ACCORDING TO IS 2404 : 1993

SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF MALT EXTRACT ACCORDING TO IS 2404 : 1993 DOC:STI/2404/4 SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF MALT EXTRACT ACCORDING TO IS 2404 : 1993 1. LABORATORY -A laboratory shall be maintained which shall be suitable equipped and staffed,

More information

CENTRAL MARKS DEPARTMENT-2. Our Ref: CMD-2/16: Sub: STI, Doc: STI/14252/1 October 2016, for the product as per IS 14252:2015

CENTRAL MARKS DEPARTMENT-2. Our Ref: CMD-2/16: Sub: STI, Doc: STI/14252/1 October 2016, for the product as per IS 14252:2015 क य म हर वभ ग-2 हम र स दभ: स एमड 2/16: 14252 25 10 2016 वषय: आई एस 14252 क लए परण एव नरण क य जन, ड क: एसटआई/14252)/1 अ(त बर 2016. सम -.धक र 0व र अन म 2दत व45 2द उ8च घन;व प लथ न (एचड प ई)/ प ल- पलन (प प

More information

1.1 All testing apparatus shall be periodically checked and calibrated and recordr of such checks/calibration shall be maint.ained.

1.1 All testing apparatus shall be periodically checked and calibrated and recordr of such checks/calibration shall be maint.ained. : SCHEME OF TESTNG AND NSPECTON FOR CERTFCATON OF NHBTED MNERAL NSULATNG OLS ACCORDNG TO S 2463:988 DOC:ST/2463/ June 999 J.~.AJ30HA.TQR.:x- A laboratory sha] be maintained which shal be suitably equipped

More information

BUREAU OF INDIAN STANDARD (Faridabad Branch Office)

BUREAU OF INDIAN STANDARD (Faridabad Branch Office) BUREAU OF INDIAN STANDARD (Faridabad Branch Office) Our ref: FRBO/9798:2013 Date- 31-12-2014 Subject: Implementation of IS 9798:2013, Low Pressure Regulators for Use With Liquefied Petroleum Gas (LPG)

More information

CENTRAL MARKS DEPARTMENT-2

CENTRAL MARKS DEPARTMENT-2 क य म हर वभ ग 2 हम र स दभ: स एमड 2/16: 15997 18 07 2016 वषय: आई एस 15997 बतन एव रस ईघर स ध" क %लए अ(प *नकल ऑ,ट *नट.क,ट नल स,ट.ल क/ च दर एव पत क लए सम ह क 2दश *नद4श तथ पर.6ण एव *नर.6ण क/ य जन,ड क: एसट.आई/15997/1

More information

BUREAU OF INDIAN STANDARDS CENTRAL MARKS DEPARTMENT- I. Our Ref: CMD I/

BUREAU OF INDIAN STANDARDS CENTRAL MARKS DEPARTMENT- I. Our Ref: CMD I/ BUREAU OF INDIAN STANDARDS CENTRAL MARKS DEPARTMENT- I Our Ref: CMD I/31 01 11 2011 Subject: Amendment No. 17 to Operating Manual for Product Certification, 2004 The procedure for Stop Marking and Resumption

More information

CONSTRUCTION SECTOR STANDARDIZATION GUIDANCE DOCUMENT

CONSTRUCTION SECTOR STANDARDIZATION GUIDANCE DOCUMENT TF N 548 Rev1 2012-03-29 CONSTRUCTION SECTOR STANDARDIZATION GUIDANCE DOCUMENT How to draft clauses on Assessment and Verification of the Constancy of Performance (AVCP) in harmonized standards for construction

More information

LC 16 SITE PLANS, DESIGNS AND SPECIFICATIONS

LC 16 SITE PLANS, DESIGNS AND SPECIFICATIONS Title of document ONR GUIDE LC 16 SITE PLANS, DESIGNS AND SPECIFICATIONS Document Type: Unique Document ID and Revision No: Nuclear Safety Technical Inspection Guide Date Issued: September 2015 Review

More information

Amendment to Schedule 8 for Ceiling Fan. (i) in paragraph 8, for sub-paragraph (i) the following shall be substituted, namely:-

Amendment to Schedule 8 for Ceiling Fan. (i) in paragraph 8, for sub-paragraph (i) the following shall be substituted, namely:- Revision 1 Date: 28/01/2016 Amendment to Schedule 8 for Ceiling Fan In the said schedule, (i) in paragraph 8, for sub-paragraph (i) the following shall be substituted, namely:- Effective from 1 st January

More information

Heat Pump KEYMARK. KEYMARK certificates and sub-licenses for other brands, product names, and sellers

Heat Pump KEYMARK. KEYMARK certificates and sub-licenses for other brands, product names, and sellers Page: 1 of 5 Date Description of modification Revision number 14-12-2015 Initial version 1 10/03/2017 Format revision, update of the chart, ediorial changes 2 KEYMARK certificates and sub-licenses for

More information

CEN Keymark Scheme Rules for Thermostatic Radiator Valves. 2 nd Edition

CEN Keymark Scheme Rules for Thermostatic Radiator Valves. 2 nd Edition CEN Keymark Scheme Rules for Thermostatic Radiator Valves 2 nd Edition Content Foreword... 3 Introduction... 3 1 Scope... 4 2 References... 4 3 Terms and Definitions... 4 4 Application... 5 4.1 Product

More information

DRAFT PRODUCT CERTIFICATION MANUAL FOR COMMENTS. Our Ref.CRO 22 / FRBO 20 Jan 2014

DRAFT PRODUCT CERTIFICATION MANUAL FOR COMMENTS. Our Ref.CRO 22 / FRBO 20 Jan 2014 DRAFT PRODUCT CERTIFICATION MANUAL FOR COMMENTS Our Ref.CRO 22 / FRBO 20 Jan 2014 Please find enclosed the following draft certification manual : PRODUCT MANUAL ON ROTATIONAL MOULDED POLYETHYLENE WATER

More information

CERTIFICATION SCHEME FOR TYPE APPROVAL OF PRODUCTS

CERTIFICATION SCHEME FOR TYPE APPROVAL OF PRODUCTS CERTIFICATION SCHEME FOR TYPE APPROVAL OF PRODUCTS 1. Introduction 1.1 Scheme for type approval of products of Indian Register of Shipping (IRS) is an impartial certification system based on a design review

More information

2012 VIRGINIA INDUSTRIALIZED BUILDING SAFETY REGULATIONS

2012 VIRGINIA INDUSTRIALIZED BUILDING SAFETY REGULATIONS 13VAC5-91-10. Definitions. The following words and terms when used in this chapter shall have the following meanings unless the context clearly indicates otherwise. Administrator means the Director of

More information

OPAC EN Operating Procedure for the Attestation of Conformity of Structural Bearings in compliance with Annex ZA of EN 1337/3/4/5/6/7

OPAC EN Operating Procedure for the Attestation of Conformity of Structural Bearings in compliance with Annex ZA of EN 1337/3/4/5/6/7 OPAC EN1337-00 Operating Procedure for the Attestation of Conformity to EN1337 Revision 00 Approved by BT3 on 20050525, by Board of directors on 20050610 Operating Procedure for the Attestation of Conformity

More information

BUREAU OF INDIAN STANDARDS. (Southern Regional Office) Our Ref: 60/CM

BUREAU OF INDIAN STANDARDS. (Southern Regional Office) Our Ref: 60/CM (Southern Regional Office) Our Ref: 60/CM 1 10 03 2014 Subject: Preparation & Review of Product Manuals for Product Certification This has reference to CMD-I s circular CMD-1/31 dated 11 Nov 2013 on the

More information

UGANDA NATIONAL BUREAU OF STANDARDS CERTIFICATION SCHEME

UGANDA NATIONAL BUREAU OF STANDARDS CERTIFICATION SCHEME 1. NAME AND ADDRESS OF APPLICANT Company Name Company Tax Identification Number (TIN) A. APPLICANT S INFORMATION Business Registration Please attach certificate of registration of business COMPANY ADDRESS

More information

INSTRUCTIONS FOR CERTIFICATION OF FACTORY PRODUCTION CONTROL

INSTRUCTIONS FOR CERTIFICATION OF FACTORY PRODUCTION CONTROL . August 2017 were approved by Manager of Product Certification Bureau of the Polish Register of Shipping on 25 August 2017 Copyright by, 2017. GDAŃSK, AUGUST 2017 1/12 CONTENTS 1. Factory Production Control

More information

November 12, The Law of Islamic Republic of Afghanistan Draft Law on Industrial Designs

November 12, The Law of Islamic Republic of Afghanistan Draft Law on Industrial Designs November 12, 2012 The Law of Islamic Republic of Afghanistan Draft Law on Industrial Designs Industrial Designs Chapter One General Provisions Article NO Topic Page Article 1: Basis ------------------------------------------------------------------

More information

EPICOR, INCORPORATED QUALITY ASSURANCE MANUAL

EPICOR, INCORPORATED QUALITY ASSURANCE MANUAL EPICOR, INCORPORATED QUALITY ASSURANCE MANUAL Revision: 6 Date 05/18/09 EPICOR, INCORPORATED 1414 E. Linden Avenue P.O. Box 1608 Linden, NJ. 07036-0006 Tel. 1-908-925-0800 Fax 1-908-925-7795 Table of Contents:

More information

DECISION NO lQD-BYT OF DECEMBER 8, 2005, PROMULGATING THE REGULATION ON STATEMENT OF FOOD PRODUCT SPECIFICATIONS THE MINISTER OF HEALTH

DECISION NO lQD-BYT OF DECEMBER 8, 2005, PROMULGATING THE REGULATION ON STATEMENT OF FOOD PRODUCT SPECIFICATIONS THE MINISTER OF HEALTH 54 OFFICIAL GAZElTE CBng 660 nos 19-20 (16-12.2005) THE MINISTRY OF HEALTH DECISION NO. 4212005lQD-BYT OF DECEMBER 8, 2005, PROMULGATING THE REGULATION ON STATEMENT OF FOOD PRODUCT SPECIFICATIONS THE MINISTER

More information

Hong Kong Science and Technology Parks Corporation

Hong Kong Science and Technology Parks Corporation Hong Kong Science and Technology Parks Corporation REQUEST FOR QUOTATION Biomedical Technology Support Centre Thermo cycler (REF #: RFQ/BSC/2018/001) Ref #: RFQ/BSC/2018/001 1 of 13 PURPOSE Hong Kong Science

More information

BIS or used as Amendment to STANDARD comments is 15 Nov. 2008

BIS or used as Amendment to STANDARD comments is 15 Nov. 2008 Doc: MTD 4 (4730) For comments only BUREAU OF INDIAN STANDARDS Modified draft Indian Standard HOT ROLLED CARBON STEEL SHEET AND STRIP (Sixth Revision of IS 1079) ICS 77.140.50 Not to be reproduced without

More information

(A.2) DURING PERFORMANCE OF THIS ORDER, YOUR QUALITY CONTROL SYSTEMS AND MANUFACTURING PROCESS ARE SUBJECT TO REVIEW, VERIFICATION,

(A.2) DURING PERFORMANCE OF THIS ORDER, YOUR QUALITY CONTROL SYSTEMS AND MANUFACTURING PROCESS ARE SUBJECT TO REVIEW, VERIFICATION, (A) GENERAL: (A.1) PRATT & WHITNEY IS THE END USER. (A.2) DURING PERFORMANCE OF THIS ORDER, YOUR QUALITY CONTROL SYSTEMS AND MANUFACTURING PROCESS ARE SUBJECT TO REVIEW, VERIFICATION, ANALYSIS, AND APPROVAL

More information

Certification program "Quality Mark TMT" Checklist initial surveillance inspection

Certification program Quality Mark TMT Checklist initial surveillance inspection Certification program "Quality Mark TMT" Checklist initial surveillance inspection Name and site of factory Date of inspection Inspection performed by (name, company) present factory representatives Person

More information

Factory Inspection Report

Factory Inspection Report PERMANENT DOCUMENT CIG 023 Factory Inspection Report WARNING: THIS DOCUMENT IS ONLY VALID IF USED BY ECS MEMBERS AND THEIR AUTHORISED AGENTS Approved by: ECS General Meeting, 22/23-04-2009 Nr of pages:

More information

Trident Precision Manufacturing

Trident Precision Manufacturing Trident Precision Manufacturing QASQC Rev. A 6/7/06 Title: Supplier Quality Clauses Author: April V. Lusk Director of Quality General Suppliers are responsible for compliance to all stated Quality Clauses

More information

New Advanced Environmental Air Treatment System

New Advanced Environmental Air Treatment System Commercial PHI Unit New Advanced Environmental Air Treatment System Thank you for purchasing the Commercial PHI Unit by RGF Advanced Oxidation Systems. We are confident this system will provide you with

More information

STANDARDS ORGANISATION OF NIGERIA

STANDARDS ORGANISATION OF NIGERIA INTRODUCTION TO THE NEW SONCAP PROGRAMME The Nigerian Standards Organisation of the Federal Republic of Nigeria is responsible for the preparation, adoption and application of Standards for both imported

More information

TUV SUD BABT PRODUCTION QUALITY CERTIFICATION SCHEME

TUV SUD BABT PRODUCTION QUALITY CERTIFICATION SCHEME TUV SUD BABT PRODUCTION QUALITY CERTIFICATION SCHEME Copyright TUV SUD BABT 2017 A Certification Body of: Page 1 of 33 Contents AMENDMENT RECORD 3 0. INTRODUCTION 3 1. PRE-CONDITIONS TO SUPPORT PRODUCTION

More information

INDUSTRIALIZED HOUSING AND BUILDINGS Administrative Rules of the Texas Department of Licensing and Regulation 16 Texas Administrative Code, Chapter 70

INDUSTRIALIZED HOUSING AND BUILDINGS Administrative Rules of the Texas Department of Licensing and Regulation 16 Texas Administrative Code, Chapter 70 INDUSTRIALIZED HOUSING AND BUILDINGS Administrative Rules of the Texas Department of Licensing and Regulation 16 Texas Administrative Code, Chapter 70 TABLE OF CONTENTS 70.1. Authority... 1 70.10. Definitions...

More information

(A.2) DURING PERFORMANCE OF THIS ORDER, YOUR QUALITY CONTROL SYSTEMS AND MANUFACTURING PROCESS ARE SUBJECT TO REVIEW, VERIFICATION,

(A.2) DURING PERFORMANCE OF THIS ORDER, YOUR QUALITY CONTROL SYSTEMS AND MANUFACTURING PROCESS ARE SUBJECT TO REVIEW, VERIFICATION, (A) GENERAL: (A.1) PRATT & WHITNEY IS THE END USER. (A.2) DURING PERFORMANCE OF THIS ORDER, YOUR QUALITY CONTROL SYSTEMS AND MANUFACTURING PROCESS ARE SUBJECT TO REVIEW, VERIFICATION, ANALYSIS, AND APPROVAL

More information

QUALITY ASSURANCE INSPECTION AGENCY AUDIT PROGRAM GUIDE EXHIBITS. Developed by

QUALITY ASSURANCE INSPECTION AGENCY AUDIT PROGRAM GUIDE EXHIBITS. Developed by QUALITY ASSURANCE INSPECTION AGENCY AUDIT PROGRAM GUIDE EXHIBITS Developed by 7508 Wisconsin Avenue, 4 th Floor Bethesda, Maryland 20814 301-652-7925 Second Edition Issued September 2016 E -1 EXHIBIT 1:

More information

Guidance for Swedac s assessors on the assessment of laboratories based on the requirements set out in SS-EN ISO/IEC 17025:2005

Guidance for Swedac s assessors on the assessment of laboratories based on the requirements set out in SS-EN ISO/IEC 17025:2005 SWEDAC DOC 02:5 Version 10 2016-05-16 Guidance for Swedac s assessors on the assessment of laboratories based on the requirements set out in SS-EN ISO/IEC 17025:2005 Swedac, Swedish Board for Accreditation

More information

SOLAR KEYMARK SPECIFIC SCHEME RULES ANNEX E: FACTORY PRODUCTION CONTROL INFORMATIVE BASED ON ISO 9001 STANDARD COVERING THE PRODUCTION LINE

SOLAR KEYMARK SPECIFIC SCHEME RULES ANNEX E: FACTORY PRODUCTION CONTROL INFORMATIVE BASED ON ISO 9001 STANDARD COVERING THE PRODUCTION LINE SOLAR KEYMARK SPECIFIC SCHEME RULES ANNEX E: FACTORY PRODUCTION CONTROL INFORMATIVE BASED ON ISO 9001 STANDARD COVERING THE PRODUCTION LINE 1. General This annex specifies the requirements for the Factory

More information

STANDARDS ORGANISATION OF NIGERIA

STANDARDS ORGANISATION OF NIGERIA ISSUED: 09-Oct-13 INTRODUCTION TO THE NEW SONCAP PROGRAMME The Nigerian Standards Organisation of the Federal Republic of Nigeria is responsible for the preparation, adoption and application of Standards

More information

Certification Programme No. PCW-12. for construction products System 1, 1+ (certification of constancy of performance) CPR-1,1+

Certification Programme No. PCW-12. for construction products System 1, 1+ (certification of constancy of performance) CPR-1,1+ I N S T Y T U T N A F T Y i G A Z U O IL AN D G AS INS TI TUTE PL 31-503 Kraków, ul. Lubicz 25A Tel. +48/12/ 4210033 Fax: +48/12/ 4210050 B I U R O C E R T Y F I K A C J I CERTIFICATION OFFICE Tel. +48/12/

More information

HEAT PUMP POOL HEATERS CERTIFICATION PROGRAM

HEAT PUMP POOL HEATERS CERTIFICATION PROGRAM HEAT PUMP POOL HEATERS CERTIFICATION PROGRAM AHRI HPPH OM JANUARY 2017 2111 Wilson Blvd, Suite 500 Arlington, Virginia 22201 (703) 524-8800 Sponsored and administered by: PREFACE The following manual outlines

More information

2.0 Test Records - All records of analysis and tests shall be kept in suitable forms approved by the Bureau of Indian Standards (BIS).

2.0 Test Records - All records of analysis and tests shall be kept in suitable forms approved by the Bureau of Indian Standards (BIS). SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF PACKAGED DRINKING WATER (OTHER THAN PACKAGED NATURAL MINERAL WATER) ACCORDING TO IS 14543:2004 (Incorporating Amendment No. 1 to 7) 1.0 Laboratory

More information

ISO/IEC INTERNATIONAL STANDARD. Conformity assessment General requirements for proficiency testing

ISO/IEC INTERNATIONAL STANDARD. Conformity assessment General requirements for proficiency testing INTERNATIONAL STANDARD ISO/IEC 17043 First edition 2010-02-01 Conformity assessment General requirements for proficiency testing Évaluation de la conformité Exigences générales concernant les essais d'aptitude

More information

ISO/IEC INTERNATIONAL STANDARD. Conformity assessment General requirements for third-party marks of conformity

ISO/IEC INTERNATIONAL STANDARD. Conformity assessment General requirements for third-party marks of conformity INTERNATIONAL STANDARD ISO/IEC 17030 First edition 2003-10-01 Conformity assessment General requirements for third-party marks of conformity Évaluation de la conformité Exigences générales pour les marques

More information

STEEL TUBES FOR STRUCTURAL PURPOSES

STEEL TUBES FOR STRUCTURAL PURPOSES Steel Tubes for Structural Purpose IS Number IS 1161 Page No: 1 of 20 BUREAU OF INDIAN STANDARDS (Eastern Region Office, Kolkata) DRAFT PRODUCT CERTIFICATION MANUAL FOR COMMENTS Our Ref: DDGE/22/IS 1161

More information

FRAMEWORK CONTRACT ON TRANSPORT No. /2017

FRAMEWORK CONTRACT ON TRANSPORT No. /2017 FRAMEWORK CONTRACT ON TRANSPORT No. /2017 Customer: Title of company: DeutschMann Internationale Spedition s.r.o. Seat of company: Dopravná 1907/3 075 01 Trebišov Represented by: Jozef Poništ Identification

More information

Manufacturer Contract Information

Manufacturer Contract Information MET Laboratories, Inc. Safety Certification - EMI - Telecom - Environmental Simulation - NEBS 914 WEST PATAPSCO AVENUE BALTIMORE, MARYLAND 21230-3432 PHONE (410) 949-1802 FAX (410) 354-3313 METrak Job

More information

Altech Machining, Inc. Terms and Conditions

Altech Machining, Inc. Terms and Conditions 11000 Woodside Avenue North Phone: (619) 448-3392 Santee, CA 92071 Fax: (619) 448-6854 info@altechmachining.net Altech Machining, Inc. Terms and Conditions The terms and conditions listed in this document

More information

DIRECT HEATING EQUIPMENT CERTIFICATION PROGRAM

DIRECT HEATING EQUIPMENT CERTIFICATION PROGRAM DIRECT HEATING EQUIPMENT CERTIFICATION PROGRAM AHRI OM DHE JANUARY 2018 2111 Wilson Blvd, Suite 500 Arlington, Virginia 22201 (703) 524-8800 Sponsored and administered by: PREFACE The following manual

More information

1. You are requested to please forward your offer for the following:-

1. You are requested to please forward your offer for the following:- 1 TO: M/S REGISTERED/IMMEDIATE Heavy Industries Taxila Marketing and Procurement Directorate (Commercial Cell) Taxila Cantt, Pakistan Tel: (051) 9315033-62933 Fax No. (051) 9315029 & 31 CC/17/5061/IT-231/Ind-17/P-

More information

QUALITY ASSURANCE TERMS & CONDITIONS FOR PROCUREMENT Rev E

QUALITY ASSURANCE TERMS & CONDITIONS FOR PROCUREMENT Rev E Sections 1.0 through 5.0 apply to all suppliers doing business with RSI. Sections 6.0 through 8.0 apply to those suppliers providing materials and products for Aerospace and Defense applications. Acceptance

More information

P.V.C. INSULATED ALUMINIUM SERVICE MAIN WIRE-FINISHED PRODUCT

P.V.C. INSULATED ALUMINIUM SERVICE MAIN WIRE-FINISHED PRODUCT CEB SPECIFICATION 005-1: 2012 P.V.C. INSULATED ALUMINIUM SERVICE MAIN WIRE-FINISHED PRODUCT CEYLON ELECTRICITY BOARD SRI LANKA Telephone: +94 11 232 0953 Fax: +94 11 232 3935 CONTENTS PAGE 1. Scope 03

More information

SUPPLIER QUALITY CODES

SUPPLIER QUALITY CODES Supplier Quality s D07-00125 Rev A APPROVALS NAME AND TITLE SIGNATURE DATE M.G. Blankenship Senior Director, Operations I. Jimenez Materials Manager D07-00125-02 Page 1 of 5 SQC 1 SQC 2 SQC 3 SQC 4 SQC

More information

SINGLE PACKAGED VERTICAL AIR-CONDITIONERS AND HEAT PUMPS CERTIFICATION PROGRAM

SINGLE PACKAGED VERTICAL AIR-CONDITIONERS AND HEAT PUMPS CERTIFICATION PROGRAM SINGLE PACKAGED VERTICAL AIR-CONDITIONERS AND HEAT PUMPS CERTIFICATION PROGRAM AHRI SPVA AND SPVH OM JANUARY 2018 2111 Wilson Blvd, Suite 500 Arlington, Virginia 22201 (703) 524-8800 Sponsored and administered

More information

Chapter 3 Establishment of Japanese Agricultural Standards

Chapter 3 Establishment of Japanese Agricultural Standards The Law Concerning Standardization and Proper Labeling of Agricultural and Forestry Products (Law No. 175 of 1950) (Provisional Translation) Date of Enforcement: March 1, 2006 Contents Chapter 1 General

More information

WELMEC European cooperation in legal metrology

WELMEC European cooperation in legal metrology WELMEC 8.6 Issue 1 WELMEC European cooperation in legal metrology Measuring Instruments Directive 2004/22/EC Presumption of Conformity of the Quality System of Manufacturers with Module D or H 1 when EN

More information

STATIONARY SOURCE AUDIT SAMPLE PROGRAM [VOLUME 1, MODULE 1] GENERAL REQUIREMENTS FOR STATIONARY SOURCE AUDIT SAMPLE PROVIDERS

STATIONARY SOURCE AUDIT SAMPLE PROGRAM [VOLUME 1, MODULE 1] GENERAL REQUIREMENTS FOR STATIONARY SOURCE AUDIT SAMPLE PROVIDERS [V1M1-2014]-Rev2.0 STATIONARY SOURCE AUDIT SAMPLE PROGRAM [VOLUME 1, MODULE 1] GENERAL REQUIREMENTS FOR STATIONARY SOURCE AUDIT SAMPLE PROVIDERS TNI Working Draft Standard P.O. Box 2439 Weatherford, TX

More information

Apprenticeship Standards. Standards of Apprenticeship

Apprenticeship Standards. Standards of Apprenticeship Apprenticeship Standards Standards of Apprenticeship Commonwealth of Massachusetts Department of Labor Standards Division of Apprentice Standards Employer Program Sponsor Formulated By: Company: Manufacturing

More information

RULE CHAPTER 9B-1 FLORIDA ADMINISTRATIVE CODE FLORIDA MANUFACTURED BUILDINGS ACT OF TH EDITION EFFECTIVE MAY 13, 2007

RULE CHAPTER 9B-1 FLORIDA ADMINISTRATIVE CODE FLORIDA MANUFACTURED BUILDINGS ACT OF TH EDITION EFFECTIVE MAY 13, 2007 RULE CHAPTER 9B-1 FLORIDA ADMINISTRATIVE CODE FLORIDA MANUFACTURED BUILDINGS ACT OF 1979 12 TH EDITION EFFECTIVE MAY 13, 2007 STATE OF FLORIDA DEPARTMENT OF COMMUNITY AFFAIRS DIVISION OF HOUSING AND COMMUNITY

More information

TERMS AND CONDITIONS OF THE PURCHASE ORDER

TERMS AND CONDITIONS OF THE PURCHASE ORDER TERMS AND CONDITIONS OF THE PURCHASE ORDER AND SHIPPING INSTRUCTIONS TERMS AND CONDITIONS OF THE PURCHASE ORDER THE PARTIES HERETO AGREE AS FOLLOWS: 1. PURPOSE Subject to the terms and conditions set out

More information

SUPPLIER QUALITY REQUIREMENTS

SUPPLIER QUALITY REQUIREMENTS SUPPLIER QUALITY REQUIREMENTS TABLE OF CONTENTS 1) PURPOSE PG 2 2) KINNEAR PURCHASE ORDER PG 2 3) USE AND COMMUNICATION PG 2 4) SUPPLIER APPROVAL PG 2 5) GENERAL REQUIREMENTS PG 3 SQD Rev 2 2014-08-13

More information

ISO General Requirements for Competence of Testing Laboratories Procedure

ISO General Requirements for Competence of Testing Laboratories Procedure Competence of Testing Laboratories Page: 1 of 24 ISO 17025 General Requirements for Competence of Testing Laboratories Procedure Competence of Testing Laboratories Page: 2 of 24 Table of Contents Para.

More information

Supplier Quality Requirements Q Clauses

Supplier Quality Requirements Q Clauses Supplier Quality Requirements Q Clauses QA-0100032-Rev D DCR# 1603139 4/8/16 The following supplier quality requirements (Q Clauses), when specifically referenced in the Purchase Order by number, form

More information

Controlled By: QA Mgr. / Gen. Mgr. Effective Date: 3/31/2014 FORM-70

Controlled By: QA Mgr. / Gen. Mgr. Effective Date: 3/31/2014 FORM-70 Controlled By: QA Mgr. / Gen. Mgr. Effective Date: 3/31/2014 FORM-70 RUSSTECH PURCHASE ORDER CLAUSES RPOC 1000 EARLY DELIVERY OK "Time is of the essence for performance under this Purchase Order. Seller

More information

Part 148. CAA Consolidation. 10 March Aircraft Manufacturing Organisations - Certification

Part 148. CAA Consolidation. 10 March Aircraft Manufacturing Organisations - Certification Part 148 CAA Consolidation 10 March 2017 Aircraft Manufacturing Organisations - Certification Published by the Civil Aviation Authority of New Zealand DESCRIPTION Part 148 prescribes rules governing the

More information

Revision Date Change Author Change Summary A 04/23/2015 S. Oluwole

Revision Date Change Author Change Summary A 04/23/2015 S. Oluwole Title: Supplier Quality Clauses Page: 1 of 11 Revision Date Change Author Change Summary A 04/23/2015 S. Oluwole In case of any conflict with this document and any other requirements, the order of precedence

More information

Form Fit & Function Engineering, LLC 350 Seminole Drive Spartanburg, SC Supplementary Quality Assurance Clauses

Form Fit & Function Engineering, LLC 350 Seminole Drive Spartanburg, SC Supplementary Quality Assurance Clauses Supplementary Quality Assurance Clauses The Supplementary Quality Assurance Clauses specified on the face of the attached Purchase Order are listed below. Your compliance with these requirements is necessary

More information

House Bill 4086 Ordered by the House February 21 Including House Amendments dated February 21

House Bill 4086 Ordered by the House February 21 Including House Amendments dated February 21 th OREGON LEGISLATIVE ASSEMBLY--0 Regular Session A-Engrossed House Bill 0 Ordered by the House February Including House Amendments dated February Introduced and printed pursuant to House Rule.00. Presession

More information

Title Requirements for the accreditation of calibration laboratories

Title Requirements for the accreditation of calibration laboratories Title Requirements for the accreditation of calibration laboratories Reference RT-25 Revision 05 Date 18-07-2017 NOTE: The present document represents the English version of document under reference at

More information

FSC STANDARD. Chain of Custody Evaluations. Forest Stewardship Council FSC-STD V2-0 EN ACCREDITATION

FSC STANDARD. Chain of Custody Evaluations. Forest Stewardship Council FSC-STD V2-0 EN ACCREDITATION Forest Stewardship Council FSC STANDARD All rights reserved FSC International (FSC F000100) ACCREDITATION Title: Document reference code: Approval: FSC Board of Directors 03 July 2014 Contact for comments:

More information

Finance Chapter STATE OF ALABAMA DEPARTMENT OF FINANCE ADMINISTRATIVE CODE CHAPTER DIVISION OF PURCHASING TABLE OF CONTENTS

Finance Chapter STATE OF ALABAMA DEPARTMENT OF FINANCE ADMINISTRATIVE CODE CHAPTER DIVISION OF PURCHASING TABLE OF CONTENTS Finance Chapter 355-4-1 STATE OF ALABAMA DEPARTMENT OF FINANCE ADMINISTRATIVE CODE CHAPTER 355-4-1 DIVISION OF PURCHASING TABLE OF CONTENTS 355-4-1-.01 Repeal Of Previous Rules 355-4-1-.02 Definitions

More information

Quality Guideline for Suppliers. 1. Purpose

Quality Guideline for Suppliers. 1. Purpose Quality Guideline for Suppliers 1. Purpose The Quality Guideline (QGL) of Aumann Beelen GmbH forms an integral part of the purchase orders and is thus binding for all Suppliers, hereinafter referred to

More information

IL AC-G22:2004. Use of Proficiency Testing as a Tool for Accreditation in Testing

IL AC-G22:2004. Use of Proficiency Testing as a Tool for Accreditation in Testing IL AC-G22:2004 Use of Proficiency Testing as a Tool for Accreditation in Testing Copyright ILAC 2004 ILAC encourages the authorised reproduction of its publications, or parts thereof, by organisations

More information

INTEGRATION AND API LICENCE AGREEMENT

INTEGRATION AND API LICENCE AGREEMENT INTEGRATION AND API LICENCE AGREEMENT You must read the terms of this Integration Agreement carefully. The terms and conditions of this Integration Agreement apply to all of our Products and Services and

More information

Chain of Custody Evaluations FSC-STD V3-0 EN. All Rights Reserved FSC International 2016 FSC F000100

Chain of Custody Evaluations FSC-STD V3-0 EN. All Rights Reserved FSC International 2016 FSC F000100 Chain of Custody Evaluations All Rights Reserved FSC International FSC F000100 Title: Document reference code: Approval: Contact for comments: Chain of Custody Evaluations FSC Board of Directors FSC International

More information