क य म हर वभ ग 2 हम र स दभ: स एमड 2/16: वषय: आई एस क लए परण एव नरण क य जन, ड क: एसटआई/15852/2,अग(त 2016.
|
|
- Vanessa Floyd
- 5 years ago
- Views:
Transcription
1 क य म हर वभ ग 2 हम र स दभ: स एमड 2/16: वषय: आई एस क लए परण एव नरण क य जन, ड क: एसटआई/15852/2,अग(त सम धक र व र अन म #दत %ल'ड ड प +लए,टर स ब न वद/य1 क +लए कम ज क कपड़ (आई एस 15852:2009) क +लए परण एव 9नरण क: य जन, एसटआई (ड क:एसटआई/15852/2,अग,त 2016, त र त क य =वयन ह त स ल>न ह (अAण प छक यल ) व C. ब (क.म.Eव. 2).म ख (स एमड 2) (ह(त /-) सभ 4 य/श ख /टए6सड /एमएसड क य 7लय8 क प9रच लत 9त+लEप : आई ट एस क ब आईएस व बस इट/इ H न ट पर अपल ड करन क +लए CENTRAL MARKS DEPARTMENT-2 Our Ref: CMD-2/16: Please find enclosed Scheme of Testing & Inspection, STI Doc: STI/15852/2, August2016 for Textile Polyester Blended Woven shirting for Uniforms as per IS 15852:2009 duly approved by Competent Authority,for immediate implementation. Head (CMD-2)(sd/-) Circulated to All BOs/ROs/TXD/MSD Head (ITS): for hosting on intranet please. (Arun Pucchakayala) Scientist-B, CMD-2
2 SCHEME OF TESTING AND INSPECTION FOR CERIFICATION OF TEXTILES POLYESTER BLENDED WOVEN SHIRTING FOR UNIFORMS ACCORDING TO IS 15852: Laboratory - A laboratory shall be maintained which shall be suitably equipped and staffed to carry out the different tests in accordance with the methods given in the Indian Standards. 2.0 Test Records - All records of analysis and tests shall be kept in suitable forms approved by the Bureau of Indian Standards. 2.1 Copies of any records that may be required by BIS shall be made available at any time on request. 2.2 All the testing equipment/measuring instruments shall be periodically checked and calibrated as appropriate and records of such checks/ calibration shall be maintained. 3.0 Quality Control It is recommended that, as far as possible, Statistical Quality Control (SQC) methods may be used for controlling the quality of the products as envisaged in this Scheme [See IS 397 (Part 1), IS 397 (Part 2) and IS 397 (Part 3)]. 3.2 In addition, efforts should be made to gradually introduce a Quality Management System in accordance with IS/ISO Standard Mark - The Standard Mark(s) as given in Column (l) of the first Schedule of the licence shall be stamped or stenciled on face plaint of each piece/cutoff fabric as also, at every meter near one of the selvedges of the fabric and also on bales/case of fabric as the case may be provided always that the said fabric to which the Mark is thus applied conforms to every requirement of the specification. 5.0 Marking In additions, the following information shall be given on each piece/cut and bale/case of fabric. a) Name of the material and blend composition; b) c) Nominal length and width; Mass of base fabric without finishes (g/m 2 ); d) Manufacturer s name, initials or trade mark; e) Month and year of manufacture; f) Any other information required by the law in force; and g) BIS Licence No. (CM/L ); 5.1 The manufacturer shall comply with the requirements of cl. 5.2 of IS with respect to instructions for proper care and maintenance of woven shirting. 1
3 6.0 Packing The woven shirting shall be packed in conformity with the procedure, laid down in IS 2194, or IS 2195 or as agreed upon between the buyer and seller. 7.0 Yarn The yarn used in the manufacture of fabric shall conform to the requirement of clause 3.1 of the specification. 8.0 Level of Control - The tests as indicated in Table 1 and at levels of control specified there in shall be carried out on the whole production of the factory covered by the scheme and appropriate records and charts maintained in accordance with clause 2.0 above. All production which conforms to the Indian Standard and covered by this licence shall be marked with Standard Mark of the Bureau. 9.0 Control Unit For the purpose of this scheme, a control unit is defined as the entire quantity of Polyester blended woven shirting for uniform of the same type & composition and processed under similar conditions in single day In case a sample fails in respect to breaking strength requirement, two more samples shall be drawn and tested for that requirement. The Control Unit shall be marked only if both the samples conform the requirements specified. In case of any failure control unit represented by these samples shall be rejected and not marked In respect of all the clauses of this specification and at all stages of manufacture, the factory shall maintain appropriate controls and checks to ensure that the product conforms to the various requirements of the specification Rejection - A separate record shall be maintained giving information relating to the rejection of units of Textile Polyester blended woven shirting for uniform, which do not conform to the specification and the method of their disposal. Such material, if packed in containers, shall in no case be stored together with that conforming to the specification Samples - The licensee shall supply, free of charge, the sample or samples required in accordance with the Bureau of Indian Standards (Certification) Regulations from his factory or godown. BIS shall pay for the samples taken by it from the open market Replacement - Whenever a complaint is received soon after the goods with the Standard Mark have been purchased and used, and if there is adequate evidence that the goods have not been misused, defective goods or their components shall be replaced or repaired free of cost by the licensee in case the complaint is proved to be genuine and the warranty period (where applicable) has not expired. The final authority to judge conformity of the product to the Indian Standard shall be with BIS. The firm should have its own complaint investigation systems as per IS/ISO In the event of any damages caused by the goods bearing the Standard Mark, or claim being filed by the consumer against BIS Standard Mark and not "conforming to" the relevant Indian Standard, entire liability arising out of such non-conforming product shall be of licensee and BIS shall not in any way be responsible in such cases. 2
4 16.0 Stop Marking - The marking of the product shall be stopped under intimation to BIS, if at any time, there is some difficulty in maintaining the conformity of the product to the specification or the testing equipment goes out of order. The marking may be resumed as soon as the defects are removed under intimation to BIS. The marking of the product shall be stopped immediately if directed to do so by BIS for any reason. The marking may then be resumed only after permission by BIS. The information regarding resumption of marking shall also be sent to BIS Production Data - The licensee shall send to BIS as per the enclosed proforma-1 to be authenticated by a Chartered Accountant or by the manufacturer by giving an affidavit /undertaking, a statement of quantity produced, marked and exported by him and the trade value thereof at the end of each operative year of the licence. 3
5 IS 15852:2009 TEXTILES POLYESTER BLENDED WOVEN SHIRTING FOR UNIFORMS Table 1 Levels of Control (Para 8 of the Scheme of Testing and Inspection) LEVELS OF TEST DETAILS CONTROL Test Method No. of Lot Size Frequency Remarks Samples Clause Requirements Clause Reference 3.1& Table 1 Yarn : Each No testing is required if the consignment material is ISI marked or else accompanied by a test certificate from the Manufacturer. Table Nominal count of warp - IS 3442 One One Control Every Control Unit 1. (i) and weft yarns (for guidance only) Unit (ii) Length - IS 1954 Each Cut - Every Control Unit (iii) Overall Width - IS 1954 One One Control Unit Every Control Unit (iv) (v) Threads/dm a) warp b) weft - IS 1963 Two One Control Unit Every Control Unit Mass of base fabric without finishes (g/m 2 ) - IS One Control Unit Every Control Unit (vi) Fibre Composition: a) Polyester - 2 bobbins of A day s Once a week or earlier, Fiber composites shall be yarn production of wherever there is a tested at yarn stage. In case one count of mixing change, if the yarn is bought from outside 4
6 yarn of same blending is done at for fibre Composition the IS 3416 (Pt 1) quality Blow Room stage. If acceptance of yarn for b) Viscose/Cotton the blending is done at further processing shall be on Draw Frame stage, this the basis of sampling and requirement has to be Criteria for conformity. tested every day. 5
7 IS 15852:2009 TEXTILES POLYESTER BLENDED WOVEN SHIRTING FOR UNIFORMS Table 1 Levels of Control (Para 8 of the Scheme of Testing and Inspection) TEST DETAILS LEVELS OF CONTROL Test Method No. of Lot Size Frequency Remarks Samples Clause Requirements Clause Reference (vii) Breaking strength in Warpway and Weftway - IS 1969 (Part 1) 1 One Control Every Control Unit If sample fails, two more Unit samples for the same control unit shall be drawn and tested. Both samples shall pass the test other wise the control unit is rejected. (viii) Tear strength - IS 6489 (Part 1) 1 -do- Every Control Unit (ix) Dimensional stability to dry - IS One Control Once a week heat Unit (xi) Crease recovery angle in dry state,degrees (Initially and after three repeated washes) - IS do- -do- (xii) Pilling resistance - IS (Part 1) 2 -do- -do- (xiii) Dimensional change on washing in warpway and weftway - Annex D of IS do- -do- (xiv) Abrasion resistance - IS do- -do- (xv) ph value of aqueous extract - IS do- -do- 6
8 Clause Requirements IS 15852:2009 TEXTILES POLYESTER BLENDED WOVEN SHIRTING FOR UNIFORMS Table 1 Levels of Control (Para 8 of the Scheme of Testing and Inspection) TEST DETAILS LEVELS OF CONTROL Test Method No. of Lot Size Frequency Remarks Samples Clause Reference xvi) Minimum colour fastness ratings to - IS 2454 or 2 One Control Once a year* a) Light IS 686 Unit b) Washing Test C (3) IS/ISO 105 C10 2 -do- Once a week (i) Change in colour - (ii) Staining of adjacent fabric c) Dry heat at 150 ± 2 o C (Change in colour) - IS do- -do- d) Perspiration (Acidic and alkaline) (i) Change in colour - IS 971 (see note 1) 2 -do- -do- (ii) Staining of adjacent fabric e) Rubbing (i) Dry - IS do- -do- (ii) Wet f) Hot Pressing (i) Change in colour - IS do- -do- (ii) Staining of adjacent fabric 7
9 IS 15852:2009 TEXTILES POLYESTER BLENDED WOVEN SHIRTING FOR UNIFORMS Table 1 Levels of Control (Para 8 of the Scheme of Testing and Inspection) TEST DETAILS LEVELS OF CONTROL Test Method No.of Lot Size Frequency Remarks Clause Requirements Clause Reference samples 3.2 Cloth 3.2 IS One control unit Every control unit Soil release Annex C IS One Control Unit Once in a month if agreed to between the 4.2 Efficiency (Optional) buyer and the seller 4.3 Anti-Bacterial 4.3 IS One Control Unit Once in a month if agreed to between the Activity Value ISO (Optional) buyer and the seller Note 1: IS 971 was withdrawn and superseded by IS/ISO 105 E04:2008. *Note 2. In the first instance, samples for each colour and shade shall be drawn and tested either in independent laboratory or in laboratory of manufacturer, in case if facility exists. Those colours and shades shall be marked only if they conform to the relevant requirement of the specification. Afterwards, an undertaking to the effect that there shall be no change in brand, colour, shade and processing conditions shall be obtained from the manufacturer. However, two samples drawn from each colour & shade shall be got tested once a year in an independent laboratory or in laboratory of manufacturer, in case if facility exists. 8
10 DOC: STI/15852/2, Aug 2016 Period covered: Name of Licensee : CM/L No. : PROFORMA -1 PROFORMA FOR OBTAINING PRODUCTION DETAILS Name of Articles (s) IS No. Grade/Type/Size/Variety /Class/Rating 1.1 Brand/Trade/Name(s) of BIS Certification Marked Products 2.0 Total production of the articles(s) licensed for certification marking 2.1 Total production of the article(s) conforming to Indian Standard 3.0 Production covered with BIS Certification Mark and its Value a) Quantity b) Value (Rs.) 3.1 Brand Name used on production covered under BIS Certification Mark 3.2 Calculation of marking fee on unit-rate basis; Marking Fee per unit a) Unit b) Quantity covered with BIS Certification Mark c) Marking fee rounded off in whole rupees as obtained by applying unit rates given in (a) on quantity given in (b) Note: In case a clause is not applicable, suitable remarks may be given against it. 4.0 Quantity not covered with BIS Certification Mark. If any, and the reasons for such non-coverage 4.1 Brand Name under which non certified goods were sold 5.0 Quantity Exported with BIS Standard Mark and its value 5.1 Brand Name under which BIS Certified goods are exported 6.0 Authentication by Chartered Accountant 9
2. 0 Test Records - All records of analysis and tests shall be kept in suitable forms approved by the Bureau of Indian Standards.
SCHEME OF TESTING AND INSPECTION FOR CERIFICATION OF TEXTILES WOVEN SHIRTINGS MADE OF COTTON MAN MADE FIBRES/ FILAMENTS AND THEIR BLENDS ACCORDING TO IS 1585:009 1.0 Laboratory A laboratory shall be maintained
More informationCENTRAL MARKS DEPARTMENT-2
क य म हर वभ ग 2 हम र स दभ: स एमड 2/16: 7903 26 07 2016 वषय: आई एस 7903:2011 द- उ$च घन(व प लइथलन ब न कपड़ स बन 0तरप ल. 3 4प एसटआई स 7य /7903/4, ज ल ई 2016 अ>ययन क?लए स ल@न ह तदन स र सभ श ख ओ स अन र ध ह Hक
More informationCENTRAL MARKS DEPARTMENT-2. Our Ref: CMD-2/16: Sub: STI, Doc: STI/14252/1 October 2016, for the product as per IS 14252:2015
क य म हर वभ ग-2 हम र स दभ: स एमड 2/16: 14252 25 10 2016 वषय: आई एस 14252 क लए परण एव नरण क य जन, ड क: एसटआई/14252)/1 अ(त बर 2016. सम -.धक र 0व र अन म 2दत व45 2द उ8च घन;व प लथ न (एचड प ई)/ प ल- पलन (प प
More information(अAण प छक यल ) व D. ब (क.म.0व. 2) CENTRAL MARKS DEPARTMENT-2. Our Ref: CMD-2/16:
क य म हर वभ ग 2 हम र स दभ: स एमड 2/16: 6911 30 08 2016 वषय: आई एस 6911क लए परण एव नरण क य जन, ड क: एसटआई/6911)/3 अग)त 2016. सम धक र व र अन म #दत %ट नल स इ%प त क, चदर. तथ प01य (आई एस6911:1992) क 4लए परण
More informationस ल न प ए, (द सर स श धन) (स श धन 1 स 6 श "मल)
क य म हर वभ ग 2 हम र स दभ: स एमड 2/16:7123 16 12 2015 वषय : परण और नरण क# य जन, एसटआई Doc:STI/7123/4 *दस बर 2015 क श त ल क 0लए आई एस 7123:1993 क 2प म3 क पय स लन प ए, परण और नरण क# य जन, एसटआई Doc:STI/7123/4
More informationCENTRAL MARKS DEPARTMENT-2
क य म हर वभ ग 2 हम र स दभ: स एमड 2/16: 15997 18 07 2016 वषय: आई एस 15997 बतन एव रस ईघर स ध" क %लए अ(प *नकल ऑ,ट *नट.क,ट नल स,ट.ल क/ च दर एव पत क लए सम ह क 2दश *नद4श तथ पर.6ण एव *नर.6ण क/ य जन,ड क: एसट.आई/15997/1
More information(अन भ ग अध क र ) (स ए ड -3)
क द र ह व भ ग 3 स द भ- क द र ह व भ ग -3/16: आई एस 15511 17 भ 2016 ग षह- आई एस 15511:2004 स ईककल ज ज भ एस.ट.आई क क ह भद ह सषम अध क र व र स लगन एस.ट.आई क अन म दन कर ददय गय ह यह सभ क रय ग ह त ह आई एस 15511:2004
More informationCENTRAL MARKS DEPARTMENT-2. Ref: CMD-2/16:
CENTRAL MARKS DEPARTMENT-2 Ref: CMD-2/16:15694 05 09 2016 Subject: Implementation of STI (Doc: STI/15694/1, ) for IS 15694:2006 Potassium Iodate, Food Grade Please find enclosed STI for IS 15694:2006 Potassium
More informationक द य म हर व भ ग-2 CENTRAL MARKS DEPARTMENT -2
क द य म हर व भ ग-2 स दभभ : स एमड -2 /16:16190 27.07.2017 व षय: आई एस 16190:2014 क वष स र दद सस च ई क स ए उच च घनत प इथ ई न (एच. ड.प.ई.) समन ट ड ब न फ ट ट य ब क तत स ब ध त एस ट आई (ड क: एस ट आई /16190/1
More informationक न द र य म ह व भ ग भ स द भ- स ए ड -III/16: IS
क न द र य म ह व भ ग - III भ स द भ- स ए ड -III/16: IS 4984 03 07 2017 ग षय म ह- पवनभ क ष त आई एस 4984 : 2016 क परभप लन ललए एस ट आई Doc: STI/4984/7, इस उपर क त व षय क स दर भ ह सक षम प र ध क र न IS 4984 :
More informationBUREAU OF INDIAN STANDARDS (CMD II)
BUREAU OF INDIAN STANDARDS (CMD II) Our Ref: CMD/16:15477 01 12 2006 Subject: STI for IS 15477:2004. Title: Adhesive for Use with Ceramic Tiles and Mosaics. The Scheme of Testing and Inspection for IS
More information(ड चद र ) ञ न क ई (स ए ड -3)
क द र ह व भ ग 3 स द भ- क द र ह व भ ग -3/ 16: आई एस 14561 14 द स बर 2015 ग षह- स श ध त आई एस 14561 क एस.ट.आई क क ह भद ह त यह स च त क य ज त ह क आई एस 14561 क एस.ट.आई स श च त ज ह और सषम र च र आ श न स र इस
More informationCENTRAL MARKS DEPARTMENT-3. Our Ref: CMD-3/16: Subject: STI as per IS 13714: 1993 DUNNAGE PALLETS-WAREHOUSING
क द र ह व भ ग 3 द भ- क द र ह व भ ग -3/ 16: आई ए 13714 06.09. 2016 ग ह- आई ए 13714 : 1993 क ल ए ए ट आई आई ए 13714 : 1993 ल भ र (ड ज) प ट भ ड र ग़ क ल ए पर षण और ल ररषण य ज क य वय क ल ए ष ल य क य य एश ष ख
More information1.1 All testing apparatus shall be periodically checked and calibrated. Records of such checks/calibration shall be maintained.
SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF PART 1 GENERAL REQUIREMENTS AND TESTS ACCORDING TO IS 2486(PT.1):1993 1. LABORATORY A laboratory shall be maintained which shall be suitably equipped
More informationBUREAU OF INDIAN STANDARDS (Central Marks Department - III) Our Ref : CMD-III/16: Oct 2006
BUREAU OF INDIAN STANDARDS (Central Marks Department - III) Our Ref : CMD-III/16:8156 18 Oct 2006 Subject : SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF FASTENERS FOR CONSUMER GOODS SYNTHETIC
More informationSCHEME OF TESTING AND INSPECTION CERTIFICATION OF PHOSPHORIC ACID, FOOD GRADE ACCORDING TO IS 10508:1983
SCHEME OF TESTING AND INSPECTION CERTIFICATION OF PHOSPHORIC ACID, FOOD GRADE ACCORDING TO IS 10508:1983 1. Laboratory - A laboratory shall be maintained which shall be suitably equipped and staffed to
More informationक न र य व भ ग -2 हम र स दर भ: स एमड 2/16: व षय: आई एस 7903:2017 क प प एसट आई
क न र य व भ ग -2 हम र स दर भ: स एमड 2/16: 7903 21 12 2017 व षय: आई एस 7903:2017 क प प एसट आई यह आई एस 7903:2011 स आईएस 7903:2017 क स श धन क ह यह उत प द प म णन क अध न ह और ब आईएस बस इट क अन स र आज कक त
More informationSTI /15392 /1 April, 2009
CENTRAL MARKS DEPARTMENT-III Our Ref : CMD-III/16:15392 30 04 2009 Subject : Finalized STI as per IS 15392 : 2003 Aluminium and Aluminium Alloy Bare Foil Food Packaging The Scheme of Testing and Inspection
More informationCENTRAL MARKS DEPARTMENT-2
क य म हर वभ ग-2 हम र स दभ: स एमड -2/16:14968 22 11 2017 वषय: आई एस14968:2015 व() *द 50,क- /25,क- च न प क करन क 2लए उ5च घन7वप 2लइथ इलन (एच ड प ई)/प 2ल= प इलन (प प ) क ब न ह ए ब र क स श धन स Bय 2 एव स श
More information2.2 Copies of any records and other connected papers that may be required by the Bureau shall be made available at any time on request.
SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF SHORT-PITCH TRANSMISSION PRECISION ROLLER AND BUSH CHAINS, ATTACHMENTS AND ASSICIATED CHAIN SPROCKETS ACCORDING TO IS 2403:2014 1.0 LABORATORY A laboratory
More informationSPECIFICATION ACCORDING TO IS
SCHEME OF TESTING AND INSPECTION FOR CERIFICATION OF TEXTILES - HIGH DENSITY POLYETHYLENE (HDPE)/POLYPROPYLENE (PP) WOVEN SACKS FOR PACKAGING OF 50 kg FOODGRAINS SPECIFICATION ACCORDING TO IS 14887:2014
More informationSCHEME OF TESTING AND INSPECTION FOR CERIFICATION OF SISAL ROPES PART 1 UNTARRED VARIEITES ACCORDING TO IS 1321(Part 1):2003 (Fourth Revision)
SCHEME OF TESTING AND INSPECTION FOR CERIFICATION OF SISAL ROPES PART 1 UNTARRED VARIEITES ACCORDING TO IS 1321(Part 1):2003 (Fourth Revision) 1. LABORATORY- A laboratory shall be maintained, which shall
More informationSCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF SELF BALLASTED LAMPS FOR GENERAL LIGHTING SERVICES ACCORDING TO IS 15111(Part 1 & 2):2002
SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF SELF BALLASTED LAMPS FOR GENERAL LIGHTING SERVICES ACCORDING TO IS 15111(Part 1 & 2):2002 1 LABORATORY A laboratory shall be maintained which shall
More informationSCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF GALVANIZED STEEL BARBED WIRE FOR FENCING ACCORDING ACCORDING TO IS 278:2009 (Fourth Revision)
SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF GALVANIZED STEEL BARBED WIRE FOR FENCING ACCORDING ACCORDING TO (Fourth Revision) DOC: STI/278/, 1 LABORATORY - A laboratory shall be maintained which
More information2. TEST RECORDS - All records of tests, inspection and calibration shall be kept in suitable forms approved by the Bureau.
SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF ACCORDING TO IS 11722:1986 (Including Amendment No. 1 to 5) 1. LABORATORY A laboratory shall be maintained which shall be suitably equipped and staffed
More informationSCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF SWITCHES FOR DOMESTIC & SIMILAR PURPOSE ACCORDING TO IS 3854:1997
SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF SWITCHES FOR DOMESTIC & SIMILAR PURPOSE ACCORDING TO IS 3854:1997 Doc: STI/3854/9 1. LABORATORY A laboratory shall be maintained which shall be suitably
More informationDOC:STI/3087/4 September 2006
SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF PARTICLE BOARDS OF WOOD AND OTHER LIGNOCELLULOSIC MATERIALS (MEDIUM DENSITY) FOR GENERAL PURPOSES ACCORDING TO IS 3087:2005 (Second Revision) DOC:STI/3087/4
More informationभ रत य म नक ब य र (क द र य म हर व भ ग III) सभ श ख क य भलय स अन र ध ह क उपर क त ददश वनद श क अन प लन तत क ल प रभ स स वनव त कर
भ रत य म नक ब य र (क द र य म हर व भ ग III) हम र स दभभ : स एम ड - III/16 : 1180 (Part 1) 17 म र भ 2017 व षय : IS 1180 (Part 1): 2014 क स श धन स ख य -2 क अन प लन ह त ददश वनद श और प नर व त एस ट आई इस उपर
More information2.1 All records of tests and inspection shall be kept in suitable forms approved by the Bureau.
SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF CARBON STEEL CAST BILLET INGOTS, BILLETS, BLOOMS AND SLABS FOR RE-ROLLING INTO STEEL FOR GENERAL STRUCTURAL PURPOSES ACCORDING TO IS 2830:2012 1. LABORATORY
More information2. TEST RECORDS - All records of tests, inspection and calibration shall be kept in suitable forms approved by the Bureau.
SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF ACCORDING TO IS 15884: 2010 1. LABORATORY A laboratory shall be maintained which shall be suitably equipped and staffed where different tests given
More informationCENTRAL MARKS DEPARTMENT II. Ref: CMD-II/16:
CENTRAL MARKS DEPARTMENT II Ref: CMD-II/16: 15939 06 09 2013 Subject : Implementation of Scheme of Testing & Inspection, Doc: STI/15939/1, for BIFENTHRIN WP as per IS 15939:2011. The Scheme of Testing
More informationBUREAU OF INDIAN STANDARDS CMD-II
BUREAU OF INDIAN STANDARDS CMD-II Doc: STI/14542/1 Our Ref: CMD/16:14542 17 07 07 Subject: STI for IS 14542:1998 Title: Partly skim Milk Powder The Scheme of Testing and Inspection for 14542:1998 for Partly
More information1.1 All testing apparatus shall be periodically checked and calibrated. Records of such checks/calibration shall be maintained.
SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF SINGLE PHASE a.c. INDUCTION MOTORS FOR GENERAL PURPOSE ACCORDING TO IS 996:2009 (Including Amendment No.1) 1. LABORATORY A laboratory shall be maintained
More information1.1 All testing apparatus shall be periodically checked and calibrated records of such checks/calibration shall be maintained.
PHOTOGRAPHY MEDICAL RADIOGRAPHIC CASSETTES/SCREENS/FILMS AND HARD-COPY IMAGING FILMS 1. LABORATORY A laboratory shall be maintained which shall be suitably equipped and staffed, where different tests given
More informationBUREAU OF INDIAN STANDARDS CENTRAL MARKS DEPARTMENT III
BUREAU OF INDIAN STANDARDS CENTRAL MARKS DEPARTMENT III Our Ref : CMD-III/16: 9857 11 April, 2007 Subject : Implementation of Amendment No.1, January2007 to IS 9857:1990 - welding cables- Specification
More informationSCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF STEEL WIRE ROPES FOR GENERAL ENGINEERING PURPOSES ACCORDING TO IS 2266:2002 (Fourth Revision)
SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF STEEL WIRE ROPES FOR GENERAL ENGINEERING PURPOSES ACCORDING TO IS 2266:2002 (Fourth Revision) Doc:STI/2266/5 1. LABORATORY: A laboratory shall be maintained,
More information2. Test Records - All records of tests and analysis shall be kept in suitable forms approved by the Bureau.
. Doc: STI/2041/ 2 SCHEME OF TESTING AND INPECTION FOR CERTIFICATION OF STEEL PLATES FOR PRESSURE VESSELS USED AT MODERATE AND LOW TEMPERATURE ACCORDING TO IS 2041:2009 (Third Revision) 1. Laboratory A
More informationSCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF MALLIABLE CAST IRON PIPE FITTINGS ACCORDING TO IS: 1879:2010 (Third Revision)
SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF MALLIABLE CAST IRON PIPE FITTINGS ACCORDING TO IS: 1879:2010 (Third Revision) 1. LABORATORY: A laboratory shall be maintained which shall be suitably
More information1.1 All testing apparatus shall be periodically checked and calibrated records of such checks/calibration shall be maintained.
DOC: STI//1 SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF According to IS/IEC:2000 (Including Amendment no.2) 1. LABORATORY A laboratory shall be maintained which shall be suitably equipped and
More informationSCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF SWITCH-SOCKET-OUTLETS (NON-INTERLOCK TYPE) ACCORDING TO IS 15787:2008
SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF SWITCH-SOCKET-OUTLETS (NON-INTERLOCK TYPE) ACCORDING TO IS 15787:2008 1. LABORATORY A laboratory shall be maintained which shall be suitably equipped
More informationDOC:STI/9573/2 January 2003
SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF RUBBER HOSE FOR LIQUIFIED PETROLEUM GAS (LPG) ACCORIDING TO IS 9573:1998 (Second Revision) (Incorporating Amendment No.1 to 3) 1. LABORATORY: A laboratory
More informationBUREAU OF INDIAN STANDARDS CENTRAL MARKS DEPARTMENT-III
BUREAU OF INDIAN STANDARDS CENTRAL MARKS DEPARTMENT-III Our Ref: CMD-III/16:814 31 January 2006 Subject: Implementation of Amendment No 1 to IS 814:2004 for Covered Electrodes For Manual Metal Arc Welding
More informationSCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF TAPER ROLLER BEARINGS ACCORDING TO IS 12102:1987
DOC:STI/12102/1 SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF TAPER ROLLER BEARINGS ACCORDING TO IS 12102:1987 1. LABORATORY A laboratory shall be maintained which shall be suitably equipped and
More information2. TEST RECORDS - All records of tests, inspection and calibration shall be kept in suitable forms approved by the Bureau.
SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF HAND-OPERATED CHAIN PULLEY BLOCKS ACCORDING TO IS 3832:2005 (Third Revision) (Incorporating Amendment No. 1) DOC:STI:3832/3 1. LABORATORY A laboratory
More informationBUREAU OF INDIAN STANDARDS (CENTRAL MARKS DEPARTMENT-III)
BUREAU OF INDIAN STANDARDS (CENTRAL MARKS DEPARTMENT-III) Ref: CMD-III/16:710 15 March 2011 Subject: Implementation of revised standard IS 710:2010, for Marine Plywood and revised STI Doc: STI/710/5,.
More information1.1 All testing apparatus shall be periodically checked and calibrated and records of such checks/calibration shall be maintained.
SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF PRESSURE SENSTIVE ADHESIVE INSULATING TAPES FOR ELECTRICAL PURPOSES (PLASTICIZED POLYVINYL CHLORIDE TAPES WITH NON-THERMOSETTING ADHESIVE) ACCORDING
More informationSCHEME OF TESTING AND INSPECTION FOR CERTIFICAATION OF VENEERED DECORATIVE PLYWOOD ACCORDING TO IS 1328:1996 (Third Revision)
SCHEME OF TESTING AND INSPECTION FOR CERTIFICAATION OF VENEERED DECORATIVE PLYWOOD ACCORDING TO IS 1328:1996 (Third Revision) DOC:STI/1328/4 1. LABORATORY -A laboratory shall be maintained which shall
More informationCENTRAL MARKS DEPARTMENT-II. Our Ref: CMD-II/16: Subject: Information of revised version of Alumino-Ferric as per IS 299.
CENTRAL MARKS DEPARTMENT-II Our Ref: CMD-II/16:299 28 01 2013 Subject: Information of revised version of Alumino-Ferric as per IS 299. Please find enclosed Finalized versions of the above specification
More informationBUREAU OF INDIAN STANDARDS CENTRAL MARKS DEPARTMENT-III
BUREAU OF INDIAN STANDARDS CENTRAL MARKS DEPARTMENT-III Our Ref:CMD-III/16:12427 2003-05-27 Subject: Implementation of revised IS 12427:2001 Hexagon head transmission tower bolts and revised STI, Doc:STI/12427/2
More information1.1 All testing apparatus shall be periodically checked and calibrated records of such checks/calibration shall be maintained.
DOC: STI//1 SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF ACCORDING TO IS/IEC:2003 1. LABORATORY A laboratory shall be maintained which shall be suitably equipped and staffed, where different tests
More information2. TEST RECORDS - All records of tests, inspection and calibration shall be kept in suitable forms approved by the Bureau.
SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF STEEL WIRE ROPES FOR HAULAGES PURPOSES ACCORDING TO IS 1856:2005 (Third Revision) (INCORPORATING AMENDMENT NO. 1) 1. LABORATORY A laboratory shall
More informationSCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF ALLUMINIUM ALLOY TUBES FOR IRRIGATION PURPOSES; WELDED TUBES ACCORDING TO IS: 7092 (PART I)-1992
SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF ALLUMINIUM ALLOY TUBES FOR IRRIGATION PURPOSES; WELDED TUBES ACCORDING TO IS: 7092 (PART I)-1992 1. LABORATORY: A laboratory shall be maintained which
More information1.1 All testing apparatus shall be periodically checked and calibrated records of such checks/calibration shall be maintained.
SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF CROSSLINKED POLYETHYLENE INSULATED THERMOPLASTIC SHEATHED CABLES FOR WORKING VOLTAGES UPTO AND INCLUDING 1100 VOLTS ACCORDING TO IS 7098(Part 1):1988
More informationSCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF GRAIN ORIENTED ELECTRICAL STEEL SHEET AND STRIP ACCORDING TO IS 3024:2006 (Second Revision)
SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF GRAIN ORIENTED ELECTRICAL STEEL SHEET AND STRIP ACCORDING TO IS 3024:2006 (Second Revision) 1. Laboratory A laboratory shall be maintained which shall
More informationBUREAU OF INDIAN STANDARDS ( CENTRAL MARKS DEPARTMENT-III ) Our Ref: CMD-III/16:
BUREAU OF INDIAN STANDARDS ( CENTRAL MARKS DEPARTMENT-III ) Our Ref: CMD-III/16:4985 30-07-2007 Subject: Implementation of Amendment No 2, April 2007 to IS 4985: 2000 Unplasticized PVC Pipes for potable
More informationBUREAU OF INDIAN STANDARDS (Central Marks Department III) Our ref: CMD-III/16: November 2007
BUREAU OF INDIAN STANDARDS (Central Marks Department III) Our ref: CMD-III/16: 15658 26 November 2007 Subject: SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF PRECAST CONCRETE BLOCKS FOR PAVING AS
More information1.1 All testing apparatus shall be periodically checked and calibrated and records of such checks/calibration shall be maintained.
SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF DECORATIVE THERMOSETTING SYNTHETIC RESIN BONDED LAMINATED SHEETS ACCORDING TO IS 2046:1995 (First Revision) 1. LABORATORY: A laboratory shall be maintained
More informationSCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF FLAVOURED MILK ACCORDING TO IS 4709: 1968
SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF FLAVOURED MILK ACCORDING TO IS 4709: 1968 DOC:STI/4709/1 1.0 LABORATORY A laboratory shall be maintained which shall be suitably equipped and staffed,
More information1.1 All the testing apparatus shall be periodically checked and calibrated and records of such checks/calibration maintained.
Doc:STI/5557/6, SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF INDUSTRIAL AND PROTECTIVE RUBBER KNEE AND ANKLE BOOTS ACCORDING TO IS 5557:2004 (FOURTH REVISION) 1.0 LABORATORY- A laboratory shall
More information2. Test Record - All records of analysis and tests shall be kept in suitable forms approved by the Bureau of Indian Standards.
SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF SALT AND REFINED IODIZED SALT, VACUUM EVAPORATED IODIZED ACCORDING TO IS 7224:2006 (Second Revision) Doc: STI/7224/5 1. Laboratory - A laboratory shall
More information2.2 Copies of any records and other connected papers that may be required by the Bureau shall be made available at any time on request.
DOC:STI/694/8 July 2004 SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF PVC INSULATED CABLES (FOR VOLTAGES UPTO AND INCLUDING 1100 VOLTS) ACCORDING TO IS:694:1990 (Including amendment No.1 &2) 1.
More information2. TEST RECORDS - All records of tests, inspection and calibration shall be kept in suitable forms approved by the Bureau.
SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF COUPLINGS, BRANCH PIPE, NOZZLES USED IN HOSE REEL TUBING FOR FIRE FIGHTING ACCORDING TO 1. LABORATORY A laboratory shall be maintained which shall
More informationDoc: STI/1223(Section-2)/5 Oct 2003
SCHEME OF TESTING AND INSPECTION FOR CERIFICATION OF APPARATUS FOR DETERMINATION OF MILK FAT BY GERBER METHOD ACCORDING TO IS 1223:2001 (Third Revision) SECTION 2 - STOPPERS 1. LABORATORY- A laboratory
More informationCENTRAL MARKS DEPARTMENT III. Our Ref : CMD-III/16: Mar 2007
CENTRAL MARKS DEPARTMENT III Our Ref : CMD-III/16:418 13 Mar 2007 Subject : IMPLEMENTATION OF REVISED INDIAN STANDARD UNDER CERTIFICATION IS 418:2004 FOR TUNGSTEN FILAMENT LAMPS FOR DOMESTIC AND SIMILAR
More informationSCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF BORAX ACCORDING TO IS 1109:1980
1 LABORATORY SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF BORAX ACCORDING TO IS 1109:1980 A laboratory shall be maintained which shall be suitably equipped and staffed where different tests shall
More informationHead (CMD-2)(sd/-) Circulated to All ROs/BOs/FAD and MSD Copy to: ITS for hosting on intranet
क द य म हर व भ ग-2 स दभभ: CMD-2/16: 8498 04 09 2017 व षय: आई एस 8498:2013 क प र प एस ट आई ए ददश न द श यह आई एस 8498:1977 स आई एस 8498:2013 क स श धन क स दर भ म ह यह उत प द प म णन क अध न ह और ब आई एस व बस
More informationDoc: STI/1166/6 July 2008
SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF CONDENSED MILK, PARTLY SKIMMED AND SKIMMED CONDENSED MILK ACCORDING TO IS 1166:1986 (Incorporating Amendment No. 1, 2 & 3) 1. Laboratory - A laboratory
More information1.2 All the testing equipment shall be periodically checked and calibrated and records of such checks/ calibration maintained.
SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF GALVANIZED MILD STEEL FIRE BUCKET ACCORDING TO IS 2546:1974 (First Revision) (Including Amendment No.1&2) 1. LABORATORY DOC:STI-2546/2 1.1 A laboratory
More informationSCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF SLUICE VALVE FOR WATER WORKS PURPOSES (50 TO 1200 MM SIZE) ACCORDING TO IS 14846:2000
SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF SLUICE VALVE FOR WATER WORKS PURPOSES (50 TO 1200 MM SIZE) ACCORDING TO IS 14846:2000 1.0 LABORATORY: A laboratory shall be maintained which shall
More informationBUREAU OF INDIAN STANDARDS (Central Marks Department-III) Our Ref : CMD-III/16: October 2008
BUREAU OF INDIAN STANDARDS (Central Marks Department-III) Our Ref : CMD-III/16:14587 15 October 2008 Subject : REVISED SCHEME OF TESTING AND INSPECTION FOR PRELAMINATED MEDIUM FIBRE DENSITY BOARDS AS PER
More informationCENTRAL MARKS DEPARTMENT-III
CENTRAL MARKS DEPARTMENT-III Our Ref: CMD-III/16:814 21.12.2004 Subject: Implementation of revised IS 814:2004 Covered electrodes for manual metal arc welding of carbon and carbon manganese steel and revised
More informationCENTRAL MARKS DEPARTMENT (FCT) Ref: CMD-II/16:
CENTRAL MARKS DEPARTMENT (FCT) Ref: CMD-II/16:15489 20 03 2014 Subject: Implementation of revised STI for IS 15489 :2013 for Paint Plastic Emulsion - Specification 1. Indian Standard Specification for
More informationDOC: STI/8783(Part 4/Sec1)/1 August 1998
SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF Winding Wires for Submersible Motors Part 4 Specification for Individual Wires Sec 1 HR PVC Insulated Wires ACORDING TO IS: 8783(Part 4/Sec 1): 1995
More informationSCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF SILVERED GLASS MIRRORS FOR GENERAL PURPOSES ACCORDING TO IS :
Doc. STI 3438/4 December 1995 SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF SILVERED GLASS MIRRORS FOR GENERAL PURPOSES ACCORDING TO IS : 3438-1994 1. Laboratory A laboratory shall be maintained,
More information2.0 TEST RECORDS- All records of tests and inspection shall be kept in suitable forms approved by the Bureau of Indian Standards.
SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF BITUMEN EMULSION FOR ROADS (CATIONIC TYPE) ACCORDING TO IS 8887:2004 (Second Revision) DOC:STI/8887/3 1.0 LABORATORY- A laboratory shall be maintained,
More informationCENTRAL MARKS DEPARTMENT-III. Our Ref.:CMD-III/16:
CENTRAL MARKS DEPARTMENT-III Our Ref.:CMD-III/16:13382 29.12.2004 Subject : Implementation of revised IS 13382:2004 Cast Iron Specials for Mechanical and pushon flexible joints for pressure pipe lines
More information2.0 TEST RECORDS - All records of tests and inspection shall be kept in suitable forms approved by the Bureau.
SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF POWER CAPACITORS OF SELF-HEALING TYPE FOR AC POWER SYSTEMS HAVING RATED VOLTAGE UP TO 650 V ACCORDING TO IS 13340:1993 1. LABORATORY A laboratory shall
More information1.1 All testing apparatus shall be periodically checked and calibrated records of such checks/calibration shall be maintained.
SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF PLYWOOD FOR GENERAL PURPOSES ACCORDING TO IS : 303-1989 (third revision) (Incorporating Amendment No. 1 to 4 ) 1. LABORATORY A laboratory shall be
More informationCENTRAL MARKS DEPARTMENT-II
CENTRAL MARKS DEPARTMENT-II Our Ref.: CMD-II/16:15298 (Pt 2) ` 24 05 2012 Subject: Implementation of revised specification for IS 15298 (Pt 2):2011/ISO 20345:2004 Safety Protective and Occupational Footwear
More informationSCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF COPPER SULPHATE ACCORDING TO IS :
Doc. STI 261/2 February 1984 SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF COPPER SULPHATE ACCORDING TO IS : 261-1982 1 Laboratory A laboratory shall be maintained, which shall be suitably equipped
More information1.1 All testing apparatus shall be periodically checked and calibrated and records of such checks/calibration shall be maintained.
SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF SHUNT CAPACITORS FOR AC POWER SYSTEMS HAVING A RATED VOLTAGE ABOVE 1000 V GENERAL PERFORMANCE, TESTING AND RATING SAFETY REQUIREMENTS, GUIDE FOR INSTALLATION
More informationSCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF PLASTIC FEEDING BOTTLES ACCORDING TO IS : 1999 (Incorporating Amendment No.
SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF PLASTIC FEEDING BOTTLES ACCORDING TO IS 14625 : 1999 (Incorporating Amendment No. 1,2 3 & 4).Doc: STI/14625/3 1.0 LABORATORY- A laboratory shall be
More informationSCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF RESPIRATORY PROTECTIVE DEVICES FULL FACE MASKS ACCORDING TO IS 14166:1994
SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF RESPIRATORY PROTECTIVE DEVICES FULL FACE MASKS ACCORDING TO IS 14166:1994 1.0 Laboratory A laboratory shall be maintained, which shall be suitably
More informationSCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF TITANIUM DIOXIDE, ANATASE, FOR PAINTS ACCORDING TO IS :
SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF TITANIUM DIOXIDE, ANATASE, FOR PAINTS ACCORDING TO IS : 411-1991 Doc. STI 411/3. November 1994 1 Laboratory A laboratory shall be maintained, which
More informationCMD-II(Legal) CMD-II/16:
CMD-II(Legal) CMD-II/16:15965 11-5-2015 Subject: SCHEME OF TESTING AND INSPECTION FOR PRE-PAINTED ALUMINIUM ZINC ALLOY METALLIC COATED STEEL STRIP AND SHEET ( PLAIN ) ACCORDING TO IS 15965 :2012 MUBO (MCM)
More information2. 0 Test Records - All records of analysis and tests shall be kept in suitable forms approved by the Bureau of Indian Standards.
SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF IRRIGATION EQUIPMENT-EMITTING PIPE SYSTEMS ACCORDING TO IS 13488:2008 (First revision) 1.0 Laboratory - A laboratory shall be maintained which shall
More informationGUIDELINES FOR IMPLEMENTATION OF IS 13334(PART 1):2014
GUIDELINES FOR IMPLEMENTATION OF IS 13334(PART 1):2014 In order to implement the revised Scheme of Testing and Inspection for Skimmed Milk Powder, Standard Grade as per IS 13334 (Pt 1):2014., following
More informationBUREAU OF INDIAN STANDARDS CENTRAL MARKS DEPARTMENT-III
BUREAU OF INDIAN STANDARDS CENTRAL MARKS DEPARTMENT-III Our Ref: CMD-III/16:2556 13 April 2005 Subject: Implementation revised STI Doc: STI/2556/6,, pertaining to IS 2556 (Part-1 to 17 excluding withdrawn
More information1.1 All the testing apparatus shall be periodically checked and calibrated and records of such checks/calibration maintained.
SCHEME OF TESTING AND INSPECTION FOR CERIFICATION OF LEATHER SAFETY FOOTWEAR WITH DIRECT MOULDED POLYVINYL CHLORIDE (PVC) SOLE ACCORDING TO IS 14544:1998 DOC:STI/14544/1 1.0 LABORATORY- A laboratory shall
More information1.1 All the testing apparatus shall be checked periodically and records of such checks shall be maintained.
DOC: STI/398(Pt. 5)/2 SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF ALUMINIUM CONDUCTORS GALVANIZED STEEL REINFORCED FOR EXTRA HIGH VOLTAGE (400 KV and ABOVE) ACCORDING TO IS 398(Pt. 5):1992 1.
More informationCENTRAL MARKS DEPARTMENT (FCT) Ref: CMD-II/16:2933 (Part 1)
CENTRAL MARKS DEPARTMENT (FCT) Ref: CMD-II/16:2933 (Part 1) 20 03 2014 Subject: Implementation of revised STI for IS 2933 (Part for ENAMEL, EXTERIOR: (a) UNDERCOATING (b) FINISHING SPECIFICATION PART 1
More information2. Test Records - All records of analysis and tests shall be kept in suitable forms approved by the Bureau of Indian Standards.
Doc. STI 1848/6 January 1995 SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF WRITING AND PRINTING PAPERS ACCORDING TO IS : 1848-1991 (Third Revision) (Amendment No.1 OF September 1993) 1. Laboratory
More information1.1 All the testing apparatus shall be periodically checked and calibrated and records of such checks/calibration maintained.
November2004 SCHEME OF TESTING AND INSPECTION FOR CERIFICATION OF ENAMEL, SYNTHETIC, EXTERIOR a)under Coating b) Finishing ACCORDING TO IS 2932:2003 (Third Revision) 1. LABORATORY- A laboratory shall be
More informationCENTRAL MARKS DEPARTMENT-II
CENTRAL MARKS DEPARTMENT-II Our Ref.:CMD-II/16:1664 18 Nov 2013 Subject: Implementation of revised Scheme of Testing and Inspection (STI) Doc: STI/1664/8, for Mineral Mixture for Supplementing Cattle Feeds
More information2. TEST RECORDS - All records of tests, inspection and calibration shall be kept in suitable forms approved by the Bureau.
SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF AUTOMOTIVE VEHICLES PNEUMATIC TYRES FOR COMMERCIAL VECHICLES DIAGONAL AND RADIAL PLY ACCORDING TO IS 15636:2005 1. LABORATORY A laboratory shall be
More informationSCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF SHAVING CREAMS ACCORDING TO IS ( Incorporating Amendment No.
SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF SHAVING CREAMS ACCORDING TO IS 9740-1981 ( Incorporating Amendment No. 1,2,3,4 & 5) Doc: STI/9740/1 1.0 LABORATORY- A laboratory shall be maintained,
More informationSCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF HAND OPERATED STIRRUP-TYPE SPRAYER ACCORDING TO IS 1971:1996 (Fifth Revision)
SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF HAND OPERATED STIRRUP-TYPE SPRAYER ACCORDING TO (Fifth Revision) 1.0 LABORATORY- A laboratory shall be maintained, which shall be suitably equipped
More informationSCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF TOOTH PASTE ACCORDING TO IS 6356: 2001 (Third Revision)
SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF TOOTH PASTE ACCORDING TO IS 6356: 2001 (Third Revision) Doc:STI/6356/4 1. LABORATORY- A laboratory shall be maintained, which shall be suitably equipped
More informationMARKS DEPARTMENT-III. ROs/BOs may also propose the implementation date in view of revision of Indian
" /' CENTRAL MARKS DEPARTMENT-III Our Ref: CMD-IiI/16:2830 20062012 IndianStandardIS 2830 : 1992 has been revised and publishedas IS 2830 :. 2012 Carbon Steel Cast Billet Ingots (Pencil Ingots), Billets,
More informationSCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF 53 GRADE ORDINARY PORTLAND CEMENT ACCORDING TO IS:
SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF 53 GRADE ORDINARY PORTLAND CEMENT ACCORDING TO IS: 12269-1987 1. A laboratory shall be maintained, which shall be suitably equipped and staffed, where
More information