Effective Date: July 2018 Void After: July Product: Ceramic Plumbing Fixtures File No. 5549
|
|
|
- Iris Tate
- 5 years ago
- Views:
Transcription
1 IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the requirements of applicable codes and standards. This activity is coupled with periodic surveillance of the supplier's factory and warehouses as well as the assessment of the supplier's Quality Assurance System. This listing is subject to the conditions set forth in the characteristics below and is not to be construed as any recommendation, assurance or guarantee by IAPMO Research and Testing, Inc. of the product acceptance by Authorities Having Jurisdiction. The most updated information on this Certificate of Listing is available online at pld.iapmo.org Effective Date: July 2018 Void After: July 2019 Rambla Lluch, 2 Gava, BARCELONA Spain Identification: Ceramic Plumbing Fixtures shall be marked with the manufacturer's name or registered trademark, or in the case of private labeling, the name of the customer for whom the fixture was manufactured. Markings shall be permanent, legible, and visible after installation. The model number of close-coupled water closets shall be marked on both the tank and the bowl. Water closets and urinals shall be marked to identify the average water consumption, expressed in litres and gallons per flush. The litre or gallon value may be stated first, at the manufacturer's option. Gravity flush tanks shall be marked with a water level mark or with the information necessary to determine the water level in the tank needed to deliver the intended flush volume. This mark shall be applied to the ceramic body of the tank, the tank liner, or the flush valve overflow tube. The vertical distance between the water level mark and the lowest This listing period is based upon the last date of the month indicated on the Effective Date and Void After Date shown above. Any change in material, manufacturing process, marking or design without having first obtained the approval of the Product Certification Committee, or any evidence of non-compliance with applicable codes and standards or of inferior workmanship, may be deemed sufficient cause for revocation of this listing. Production of or reference to this form for advertising purposes may be made only by specific written permission of IAPMO Research and Testing, Inc. Any alteration of this certificate could be grounds for revocation of the listing. This document shall be reproduced in its entirety.
2 point of the tank overflow channel shall not exceed 38 mm (1.5 in). Water closet tanks shall have a label indicating at least the following: (a) the telephone number or contact information of a service department from which end-users can obtain replacement parts; (b) the serial or part number of the flush valve seal; and (c) information on procuring replacement parts for maintaining the original flush volume. All packaging shall be marked with the manufacturer's name or registered trademark; or in case of private labeling, the name of the customer for whom the fixture was manufactured and the model number. Packaging for water closets and urinals shall be marked with the water consumption in gpf and Lpf. Each fixture shall be marked with the cupc certification mark. In the case where the tank and the bowl are sold separately, both shall have the certification mark. Fixtures that require proprietary (i.e., non-standard) components, e.g., supply fittings, waste fittings, or water closet seats, shall indicate, in the packaging or the accompanying literature, that such components are provided by the manufacturer and shall identify the proper replacement parts. Fixtures that do not comply with one or more of the dimensional requirements of this Standard shall be marked with an "N" to indicate the non-standard nature of the fixture. Characteristics: Ceramic plumbing fixtures may include water closets, lavatories, urinals, bidets, service sinks and drinking fountains. To be installed
3 in accordance with the manufacturer's instructions, the latest edition of the Uniform Plumbing Code, and the National Plumbing Code of Canada. Products listed on this certificate have been tested by an IAPMO R&T recognized laboratory. This recognition has been granted based upon the laboratory's compliance to the applicable requirements of ISO/IEC Products are in compliance with the following code(s): Uniform Plumbing Code (UPC ) National Plumbing Code of Canada Products are in compliance with the following standard(s): ASME A /CSA B including Update No. 1 dated October 2013
4 MODELS: Floor Bidets: Wall Bidets: Lavatories: A (DAMA SENSO) A (GIRALDA) A (HAPPENING) A (HALL) A (GIRALDA) A (DAMA SENSO) A (HAPPENING) A (HALL) A (Armani) A32546C (GIRALDA) A32546D (GIRALDA) A32546E (GIRALDA) A (DAMA SENSO) A (HALL) A32711A (DIVERTA) A32711B (DIVERTA) A (CALA) A (ELIPTIC) A (CALA)a A32744B (VERANDA) A32746F (GIRALDA) A32746G (GIRALDA) A32746H (GIRALDA) A (DAMA SENSO) A32751E (DAMA SENSO) A32751H (DS SQUARE) A32751F (DAMA SENSO C.) A32751J (DS SQUARE) A32751G (DAMA SENSO C.) A32751K (DS SQUARE) A32751P (DS SQUARE) A (HAPPENING) A (HAPPENING) A (HAPPENING) A (HALL) A (HALL) A (HALL) A (Armani) A (Armani) A (Armani) A32787A (BOL) A32787B (FORO) A32788C (HALL) Page 4 of 6
5 A (FORO) A (HALL) A32A762 (ARMANI) A32A871 (BERNA) A32A51N (DAMA SENSO SQUARE) A32A22E (FUEGO) A32A889 (GRAN BERNA) A32AMS1 (MINI) A32A720 (SOFIA) A32A99C (VICTORIA-N) A32A99D (VICTORIA-N) A32A99E (VICTORIA-N) A DEBBA A DEBBA A DEBBA A DEBBA A DEBBA A32799F DEBBA A32799G DEBBA A32799H DEBBA A32799J DEBBA A32799M DEBBA A32799S DEBBA A INSPIRA A32750R INSPIRA A INSPIRA A32752R INSPIRA A INSPIRA A32753R INSPIRA A32752A INSPIRA A32752B INSPIRA A32752C INSPIRA A32753S INSPIRA A32764P NEXO A SOFIA A32765L URBAN A32765R URBAN A32765U URBAN A32A99B VICTORIA Pedestals only: A (GIRALDA) A (DAMA SENSO) Semi-Pedestals only: A (GIRALDA) A (DAMA SENSO) A (HAPPENING) A (HALL) Page 5 of 6
6 Water Closet Bowl / Tank: Bowl A34848B / Tank A (Milano) Bowl A / Tank A AMERICA One-Piece A34948D DEBBA One-Piece A INSPIRA Bowl A34848H / Tank A MILANO Bowl A34848R / Tank A MILANO NON-VITREOUS CHINA FIXTURES: MODELS: Range Model No. Description DIVERTA A Countertop or Wall-hung Basin-75 x 44 cm DIVERTA A Countertop or Wall-hung Basin-47 x 44 cm DIVERTA A Countertop with Upstand Basin-75 x 44 cm ELEMENT A Wall-hung wash-basin HALL A Basin-65 x 42 cm HAPPENING A Basin-80 x 47.5 cm HAPPENING A Fireclay shower tray KALAHARI A32787D Extra Flat Basin-65 x 45 cm KALAHARI A32787E Extra Flat Basin-80 x 49 cm KALAHARI A32789A Countertop Basin-59 x 50 cm KALAHARI A32789B Double Basin-120 x 51 cm KALAHARI A32789C Extra Flat Basin-100 x 51 cm LONG ISLAND A32711C Basin-90 x 44 cm MOHAVE A32787F Basin-110 x 43 cm MOHAVE A32788B Basin-75 x 43 cm STRATUM A Basin-130 x 50 cm STRATUM A Basin-110 x 50 cm STRATUM A Basin-90 x 50 cm VERANDA A32744A Double basin vanity VERANDA A32744C Countertop basin (Single) DIVERTA A32711G Countertop Basin PRISMA A Vanity Basin PRISMA A Vanity Basin PRISMA A Vanity Basin PRISMA A Vanity Basin Page 6 of 6
Effective Date: June 2015 Void After: June Product: Ceramic Plumbing Fixtures File No. 4773
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
Effective Date: July 2018 Void After: July Product: Ceramic Plumbing Fixtures File No. 4135
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
Effective Date: December Rev. 3/22/2018- Void After: December Product: Flush Valves File No. 3949
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
The identification of the flush mode shall be depicted on the actuator. This identification shall be either by graphic display or lettering, or
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
The most updated information on this Certificate of Listing is available online at pld.iapmo.org
IAPMO esearch and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
Product: Plumbing Fixtures (Stainless Steel) File No. 5914
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
Effective Date: April Rev. 1/13/2015- Void After: April 2015
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
Effective Date: April Rev. 7/31/2018- Void After: April Product: Fill Valves (Anti-Siphon) File No. 0210
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
Effective Date: January Rev. 3/14/2017- Void After: January Product: Chemical Dispensing Systems File No. 3530
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
Effective Date: October Rev. 11/6/2017- Void After: October Product: Roof Drains File No. 4835
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
Effective Date: February 2018 Void After: February Product: Solvent Cements File No. 0783
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
Effective Date: September Rev. 3/21/2018- Void After: September Product: Hydrants (Frostproof) File No. 4157
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
IAPMO RESEARCH AND TESTING, INC E. Philadelphia Street, Ontario, CA (909) Fax (909)
IAPMO RESEARCH AND TESTING, INC. 5001 E. Philadelphia Street, Ontario, CA 91761-2816 (909) 472-4100 Fax (909) 472-4244 www.iapmort.org CERTIFICATE OF LISTING IAPMO Research and Testing, Inc. is a product
Effective Date: August Rev. 5/25/2018- Void After: August Product: Solvent Cements File No. 3427
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
Effective Date: not available -Rev. 3/4/2013- Void After: Product: Showers (Plastic) File No. 3818
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
Effective Date: December 2017 Void After: December Product: PVC Solvent Cements File No. 1912
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
Effective Date: September 2017 Void After: September Product: Floor and Trench Drains File No. 3976
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
Effective Date: February 2018 Void After: February Product: Chemical Dispensing Systems File No. 4363
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
EVALUATION SUBJECT: ENAMELED CAST IRON PLUMBING FIXTURES DIVISION: PLUMBING SECTION: PLUMBING EQUIPMENT PLUMBING FIXTURES
ICC-ES Report PMG-1378 Reissued 03/2017 This report is subject to renewal 03/2018 EVALUATION SUBJECT: ENAMELED CAST IRON PLUMBING FIXTURES DIVISION: 22 00 00 PLUMBING SECTION: 22 30 00 PLUMBING EQUIPMENT
INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS IAPMO GUIDE CRITERIA FOR GLASS LAVATORIES, SINKS AND COUNTER TOPS IAPMO IGC
INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS IAPMO GUIDE CRITERIA FOR GLASS LAVATORIES, SINKS AND COUNTER TOPS IAPMO IGC 172-200810 1. PURPOSE 1.1 The purpose of this standard is to establish
Ceramic plumbing fixtures ASME A / CSA B
Ceramic plumbing fixtures ASME A112.19.2-2013/ CSA B45.1-13 Legal Notice for Harmonized Standard Jointly Developed by ASME and CSA Group Intellectual property rights and ownership As between American Society
Testing, Inspection and Certification Services for Indonesia and International Market
A SSU RA N CE CON FIDEN CE PROG R ESSI VE Testing, Inspection and Certification Services for Indonesia and International Market Plumbing Product and Building Materials testing and certification Plumbing
Certification Record
Certification Record CUSTOMER CLASS FILE Bossini SRL 6811-01 209953 Via G. Matteotti 170/A PLUMBING FITTINGS AND ACCESSORIES-Fittings Castenedolo Brescia 25014 Italy Refer to Class Description for program
AMERICAN SOCIETY OF MECHANICAL ENGINEERS
AMERICAN SOCIETY OF MECHANICAL ENGINEERS Setting the Standard for Safety and Global Relevance: An Overview of ASME Standardization and A112 Plumbing Activities OUTLINE History Vision, Mission, and Strategic
CSA Group update OPIA meeting September 22, 2018:
CSA Group update OPIA meeting September 22, 2018: Global Product, Safety & Compliance: 2018 Plumbing product recalls: No recalls issued since the June 13, 2018 OPIA meeting. 2018 Plumbing product alerts:
University of Delaware
University Contact: Energy & Engineering Group (302) 831-1744 SECTION 22 40 00_PLUMBING FIXTURES PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Water closets. 2. Urinals. 3. Lavatories. 4. Sinks. 5.
INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS IAPMO GUIDE CRITERIA FOR RECLAIMED WATER CONSERVATION SYSTEM FOR FLUSHING TOILETS
INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS IAPMO GUIDE CRITERIA FOR RECLAIMED WATER CONSERVATION SYSTEM FOR FLUSHING TOILETS IAPMO IGC 207-2009a 1. PURPOSE 1.1 The purpose of this standard
2010 California Green Building Standards Code: Nation s First Mandatory Statewide Standards Code to Green Construction and Fight Climate Change
2010 California Green Building Standards Code: Nation s First Mandatory Statewide Standards Code to Green Construction and Fight Climate Change Continuing to lead the way in the fight against climate change
ASME A Vitreous China Nonwater Urinals
Summary of Substantive Changes between the 2006 (R2011) and 2016 editions of ASME A1121919 Vitreous China Nonwater Urinals Presented to the IAPMO Standards Review Committee on December 12, 2016 General:
CSA B45.5/IAPMO Z124,
Summary of Substantive Changes between the 2017 and the 2011 edition including Update No. 1 dated May 2012 of CSA B45.5/IAPMO Z124, Plastic plumbing fixtures Presented to the IAPMO Standards Review Committee
Presented to the IAPMO Standards Review Committee on December 10, 2018
Summary of Substantive Changes between the 2013 and the 2018 editions of ASME A112.3.4/CSA B45.9 Macerating Toilet Systems and Waste Pumping Systems for Plumbing Fixtures Presented to the IAPMO Standards
Sophisticated Affordable Elegant. Vitreous China.
T Sophisticated Affordable Elegant Vitreous China wwwteagoca You Want Powerful performance, quality and innovation without sacrificing design and vision You can feel confident in knowing that Teago fixtures
Copyright 2017, ProVent Systems Inc., All Rights Reserved
Copyright 2017, ProVent Systems Inc., All Rights Reserved Introduction to ProVent Systems A PVC Plastic Single Stack Waste and Vent System The ProVent System is a plumbing engineered single stack system
BUILDING PERMIT SUBMISSION CHECKLIST NEW MULTIPLE-FAMILY RESIDENCE NEW COMMERCIAL BUILDING
BUILDING PERMIT SUBMISSION CHECKLIST NEW MULTIPLE-FAMILY RESIDENCE NEW COMMERCIAL BUILDING PROJECT SITE ADDRESS CHECKLIST PREPARED BY: ZONING DISTRICT PREPARER S PHONE NO.: ALL ITEMS BELOW MUST BE CHECKED
1. Section "Residential Plumbing Fixtures" for residential sinks.
SECTION 224216.16 - COMMERCIAL SINKS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
ICC-SRCC LISTING. DIVISION: PLUMBING Section: Residential Solar Domestic Water Heater System
ICC-SRCC LISTING SRCC TM Solar Heating & Cooling Code & Standard Listing Program Listing Number: SRCC-16004 Effective Date: May 27, 2017 This listing is subject to re-examination in one year. www.solar-rating.org
LABELLING FOR WATER EFFICIENCY
LABELLING FOR WATER EFFICIENCY Er. Subhash Deshpande Preamble The water usage per person is increasing alarmingly. The main reason is the increase in the general awareness about health, hygiene and cleanliness.
HIGH-EFFICIENCY URINALS (HEUs) U.S. and CANADA July 2010
What is a High-Efficiency Urinal? HIGH-EFFICIENCY URINALS (HEUs) U.S. and CANADA July 2010 The High Efficiency Urinal (HEU) has been a part of the North American plumbing fixture marketplace for close
Technology. Enabling Design. Geberit Duofix Carrier
Technology Enabling Design Geberit Duofix Carrier Geberit is Behind It All! With millions of installations throughout the world, the message is clear: the Geberit Duofix Carrier allows unique design without
Maximum Performance (MaP) Testing Toilet Fixture Performance Testing Protocol 1 Version 5 March 2013
Maximum Performance (MaP) Testing Toilet Fixture Performance Testing Protocol 1 Version 5 March 2013 1.0 Purpose and Scope of MaP Testing 1.1 Purpose 1.2 Scope 1.1.1 The purpose of this specification is
SECTION PLUMBING FIXTURES
SECTION 15440 - PLUMBING FIXTURES PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Basic Requirements: Provisions of Section 15010, BASIC MECHANICAL REQUIREMENTS, are a part of this Section. 1.02 SUMMARY A.
3. Sanitary Plumbing Single Stack System
3. Sanitary Plumbing Single Stack System On completion of this section, students should be able to: Design, install and develop bills of quantities for the Single Stack Systems for domestic, commercial
Educational Course Application
STATE OF WISCONSIN Department of Safety and Professional Services Educational Course Application Personal information you provide may be used for secondary purposes [Privacy Law, s. 15.04(1)(m)]. Safety
Effective Date: October 2017 Void After: October Product: Copper or Aluminum Alloy Sinks & Lavatories File No. 5800
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS MATERIAL AND PROPERTY STANDARD FOR
INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS MATERIAL AND PROPERTY STANDARD FOR TERRAZZO, MARBLE, CONCRETE, AND GRANITE, AND SLATE PLUMBING FIXTURES IAPMO PS 99-2006a 1. PURPOSE 1.1 The
ICC-SRCC LISTING. DIVISION: PLUMBING Section: Residential Solar Domestic Water Heater System
ICC-SRCC LISTING ICC-SRCC Solar Thermal Listing Program Listing Number: SRCC-16004 Effective Date: May 31, 2018 This listing is subject to re-examination in one year. www.solar-rating.org (888) 422-7233
REGISTRATION EXAMINATION, november 2015 LICENSED PLUMBER. Time allowed THREE hours
Affix label with Candidate Code Number here. If no label, enter candidate Number if known No. 99 REGISTRATION EXAMINATION, november 05 LICENSED PLUMBER INSTRUCTIONS QUESTION AND ANSWER BOOKLET Time allowed
Porcher Solutions Wall Mount, Pedestal and Above Counter Lavatories
ASSEMBLY & INSTALLATION INSTRUCTIONS Porcher Solutions Wall Mount, Pedestal and Above Counter Lavatories Thank you for selecting our Porcher product. To ensure that your installation proceeds smoothly,
EVALUATION SUBJECT: PLUMBING SUPPLY FITTINGS
ICC-ES Report PMG-1297 Reissued 12/2017 This report is subject to renewal 12/2018 EVALUATION SUBJECT: PLUMBING SUPPLY FITTINGS DIVISION: 22 00 00 PLUMBING SECTION: 22 40 00 PLUMBING FIXTURES 22 09 00 INSTRUMENTATION
TOWN OF WINDSOR HIGH-EFFICIENCY URINAL (HEU) REBATE QUALIFYING LIST October 2010
What is a High-Efficiency Urinal? TOWN OF WINDSOR HIGH-EFFICIENCY URINAL (HEU) REBATE QUALIFYING LIST October 2010 1 The High Efficiency Urinal (HEU) has been a part of the North American plumbing fixture
Appendix B. Schedule 1, Water & Wastewater Consumption Rates
Appendix B Schedule 1, Water & Wastewater Consumption Rates 1 Metered Water Consumers 2 Metered Water Consumers 3 Flat Rate 4 Flat Rate 5 Flat Rate 6 Flat Rate 7 Flat Rate 8 Flat Rate Block 1 Domestic
WATER & SEWER SERVICES
WATER/SEWER ENGINEERING SECTION PHONE (703) 228-3677 WATER & SEWER SERVICES INFORMATION & APPLICATION PACKAGE REVISED MAY 2018 1 MAY 2018 Dear Customer: Thank you for taking the time to read this information
READ ONLY. Adopting Agency BSC SFM. Adopt Entire Chapter Adopt Entire Chapter as amended (amended sections listed below)
CALIFORNIA PLUMBING CODE MATRIX ADOPTION TABLE APPENDIX C - ALTERNATE PLUMBING SYSTEMS (Matrix Adoption Tables are non-regulatory, intended only as an aid to the user. See Chapter 1 for state agency authority
Gas Station & C Store SECTION CWM Job No
SECTION 22 4000 - PART 1 - GENERAL 1.1 WORK INCLUDED A. Provide labor, materials, equipment and services to perform operations required for the complete installation and related Work as required in Contract
INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS STANDARD FOR BACKFLOW PREVENTERS AND RELIEF VALVES IAPMO TS
INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS STANDARD FOR BACKFLOW PREVENTERS AND RELIEF VALVES IAPMO TS 8-20069 1. PURPOSE 1.1 The purpose of this standard is to establish an acceptable
CST794SF. Nexus Close Coupled Toilet, 1.6GPF FEATURES MODELS COMPONENTS COLORS/FINISHES CODES/STANDARDS PRODUCT SPECIFICATION
CST794SF Nexus Close Coupled Toilet, 1.6GPF FETURES G-Max flushing system, low consumption (1.6GPF/6.0LPF) Elongated skirted design Universal Height Decorative two-piece design with high-profile tank Chrome
Refer to Part 4 Section D20 for performance requirements of the building elements included in the plumbing system.
6. ENGINEERING SYSTEMS REQUIREMENTS D20 PLUMBING SYSTEMS REQUIREMENTS PLUMBING TEMPLATE 02/18 Instructions for using this template: There are template files for each UNIFORMAT Level 2 Group Element. This
Charter Township of Raisin
Charter Township of Raisin Authority: AC. 230 of 1972 As Amended PLUMBING PERMIT APPLICATION Application date: Completion: Installation shall not 5525 Occidental Hwy. Permit # be started until an application
Element D Services Plumbing
Fixtures PART 1 - GENERAL 1.01 OVERVIEW A. This section addresses plumbing fixtures, trim and associated accessories. Refer to MD Anderson Cancer Center Master Construction Specification Sections for additional
GUIDELINES FOR SEPTIC SYSTEM DESIGN
GUIDELINES FOR SEPTIC SYSTEM DESIGN Single Family Residential For multi family or commercial buildings, Or If in the Oakdale area, contact the Department of Environmental Resources Regarding septic system
EVENT 29: November 15, 2017 THE DO-DOs AND DON Ts OF TOILET ROOM DESIGN
EVENT 29: November 15, 2017 THE DO-DOs AND DON Ts OF TOILET ROOM DESIGN THE DO-DOs AND DON Ts OF TOILET ROOM DESIGN - CREDIT(S) EARNED ON COMPLETION OF THIS COURSE WILL BE REPORTED TO AIA CES FOR AIA MEMBERS.
GOLDEN APARTMENTS COMPLETE RENOVATION PROJECT 2312 N. Golden Ave San Bernardino, CA SUPPLEMENT TO: PLUMBING SPECIFICATIONS
GOLDEN APARTMENTS COMPLETE RENOVATION PROJECT 2312 N. Golden Ave San Bernardino, CA 92404 SUPPLEMENT TO: PLUMBING SPECIFICATIONS 22 Plumbing o Re-Pipe PEX o Fixtures Kitchen Kitchen sink -33x22 Double
Code Compliance Research Report CCRR-0225
Code Compliance Research Report CCRR-0225 Issue Date: 02-04-2016 Revision Date: 05-30-2018 Renewal Date: 02-10-2019 DIVISION: 09 00 00 - FINISHES Section: 09 69 00 Access Flooring REPORT HOLDER: Global
EVALUATION SUBJECT: VIEGA LLC PROPRESSG AND MEGAPRESSG SYSTEM
ICC-ES Report PMG-1036 Reissued 07/2018 This report is subject to renewal 07/2019 EVALUATION SUBJECT: VIEGA LLC PROPRESSG AND MEGAPRESSG SYSTEM DIVISION: 23 00 00 HEATING, VENTILATING AND AIR CONDITIONING
BUILDING PERMIT SUBMISSION CHECKLIST NEW SINGLE-FAMILY RESIDENCE NEW TWO-FAMILY RESIDENCE NEW MULTIPLE SINGLE FAMILY (TOWNHOUSE)
BUILDING PERMIT SUBMISSION CHECKLIST NEW SINGLE-FAMILY RESIDENCE NEW TWO-FAMILY RESIDENCE NEW MULTIPLE SINGLE FAMILY (TOWNHOUSE) PROJECT SITE ADDRESS CHECKLIST PREPARED BY: ZONING DISTRICT PREPARER S PHONE
READ ONLY. Adopting Agency BSC SFM. Adopt Entire Chapter X X X Adopt Entire Chapter as amended (amended sections listed below) X X X X X X
CALIFORNIA PLUMBING CODE MATRIX ADOPTION TABLE CHAPTER 9 - VENTS (Matrix Adoption Tables are non-regulatory, intended only as an aid to the user. See Chapter 1 for state agency authority and building application.)
Schedule 1, Water & Wastewater Consumption Rates
Schedule 1, Wr & Wastewr Consum Rs Due D 1 Metered Wr Block 1 Domestic Use Per cubic metre ($/m3) $2.8567 $2.7137 No Consumers General Wr R Applicable to all consumers of wr, including the first 6,000
EVALUATION SUBJECT: NIRON POLYPROPYLENE (PP-RCT) PIPING SYSTEM DIVISION: PLUMBING SECTION: DOMESTIC WATER PIPING
ICC-ES Report PMG-1244 Reissued 04/2017 This report is subject to renewal 04/2018 EVALUATION SUBJECT: NIRON POLYPROPYLENE (PP-RCT) PIPING SYSTEM DIVISION: 22 00 00 PLUMBING SECTION: 22 11 16 DOMESTIC WATER
About Us. Sarreguemines products are sold across France and Europe and are now available at the top sanitary ware showroom in Cairo.
١ About Us Sarreguemines is the oldest sanitary ware factory still operating in France. The company dates back to 1778, and has always prided itself on making top quality products designed by French and
Capital Projects Group Mechanical Work Commissioning Specification
Capital Projects Group Mechanical Work Commissioning Specification Specification 20 05 40 Revision 0 Date: August 2018 Mechanical Work Commissioning Specification Specification 20 05 40 Publication Date:
Quality System Document DOC #
Page 2 of 9 Q ote Description AA AA1 AA2 AA3 AA4 AA5 AA6 AA7 AA8 AA9 AA10 AA11 AA12 AB AC AD AE AF AG AH AI AJ AK AL AM A AO AP AQ AR AS AT AU AV AW Universal Quality ote Quality Management System Quality
MADE IN U.S.A. PROVEN QUALITY PERFORMANCE
MADE IN U.S.A. PROVEN QUALITY PERFORMANCE PROVEN... PROVEN TECHNOLOGY With a 25-year track record of reliable service, FLUSHMATE has been the choice of all major domestic and international fixture manufacturers.
EcoVantage. Water Conservation Systems
EcoVantage Water Conservation Systems The Zurn Difference Zurn understands the importance of contributing to the nation s efforts to conserve water. Federal mandates such as White House Executive Order
EVALUATION SUBJECT: IPEX AQUARISE CPVC HOT- AND COLD- POTABLE WATER DISTRIBUTION SYSTEM
ICC-ES Report PMG-1156 Reissued 08/2018 This report is subject to renewal 08/2019 EVALUATION SUBJECT: IPEX AQUARISE CPVC HOT- AND COLD- POTABLE WATER DISTRIBUTION SYSTEM DIVISION: 22 00 00 PLUMBING SECTION:
SHORT TITLE INTERPRETATION APPLICATION NATIONAL BUILDING CODE BUNGALOW CAMPS AND MOTELS
Enabling Statute: Canada National Parks Act National Parks Building Regulations (C.R.C., c. 1114) Disclaimer: These documents are not the official versions (more). Regulation current to June 5th, 2007
I N V I T A T I O N T O B I D City and Borough of Wrangell Premanufactured Restroom
Overview The (CBW) requests sealed bids from interested and qualified firms to provide a, on a one-time basis. Supplier shall furnish all labor, materials, tools, and equipment necessary for supplying
EVALUATION SUBJECT: CURAFLO ENGINEERED FLOW LINING SYSTEMS DIVISION: PLUMBING SECTION: DOMESTIC WATER PIPING.
ICC-ES Report PMG-1057 Reissued 02/2018 This report is subject to renewal 02/2019 EVALUATION SUBJECT: CURAFLO ENGINEERED FLOW LINING SYSTEMS DIVISION: 22 00 00 PLUMBING SECTION: 22 11 16 DOMESTIC WATER
CRAFTSMAN EXAMINATION, NOVEMBER 2008 PLUMBING ANSWER SCHEDULE
No. 9195 CRAFTSMAN EXAMINATION, NOVEMBER 2008 PLUMBING ANSWER SCHEDULE Plumbers, Gasfitters and Drainlayers Board, 2008. All rights reserved. No part of this publication may be reproduced by any means
In-Wall Tank and Bowl Carrier System With Dual Flush Technology Geberit Model No Flush Volume: 1.6 / 0.8 GPF / 3.
D400-00 07-00 965.94.00.0 (00) In-Wall Tank and owl Carrier System With Dual Flush Technology Geberit Model No..78.00. Flush Volume:.6 / 0.8 GPF - 6.0 /.0 LPF Product Data Product Specifications - For
Application To Segregate Water Service
Application To Segregate Water Service If two or more existing legally constructed dwellings exist on a property and are connected to a common water meter, installation of additional meter(s) may be permissible
Paschal Engineering & Forensic Consulting, LLC
Paschal Engineering & Forensic Consulting, LLC October 20, 2008 7345 Merritt Road Ypsilanti, MI 48197 734-340-4045 Ms. Gabriella Davis Standards Council Secretary IAPMO 5001 East Philadelphia Street Ontario,
DENR Public Water Supply Section FIGURE 1(A): ALKALINITY VS PH
FIGURE 1(A): ALKALINITY VS PH FIGURE 1(B): ALKALINITY VS TOTAL FREE CARBON DIOXIDE Source of Figures 1(a) and 1(b): Water Supply and Waste Disposal. Hardenberg, W.A., and Rodie, E.S., International Textbook
ICC-ES Report. PMG-1009 Reissued 10/2017 This report is subject to renewal 10/2018 EPIPE EPOXY LINED PIPING SYSTEM ACE DURAFLO SYSTEMS, LLC
ICC-ES Report PMG-1009 Reissued 10/2017 This report is subject to renewal 10/2018 EVALUATION SUBJECT: EPIPE EPOXY LINED PIPING SYSTEM DIVISION: 22 00 00 PLUMBING SECTION: 22 11 16 DOMESTIC WATER PIPING
HOLDING TANK PLANNING & INSTALLATION GUIDELINES
HOLDING TANK PLANNING & INSTALLATION GUIDELINES Under no circumstances is sewage from a holding tank to be discharged onto the surface of the ground or into groundwater or surface waters. TABLE OF CONTENTS
City of Galena Request for Quotes for Plumbing Work at Train Depot, 101 Bouthillier Street Quotes Due: 10 am on Wednesday 6 December 2017
City of Galena Request for Quotes for Plumbing Work at Train Depot, 101 Bouthillier Street Quotes Due: 10 am on Wednesday 6 December 2017 Instructions & General Information The City of Galena is requesting
2016 CALGREEN RESIDENTIAL CHECKLIST MANDATORY ITEMS City of San Carlos - Building Division 600 Elm Street, San Carlos, CA Phone:
2016 CALGREEN RESIDENTIAL CHECKLIST MANDATORY ITEMS City of San Carlos - Building Division 600 Elm Street, San Carlos, CA 94070 Phone: 650-802-4261 PURPOSE: The residential provisions of the 2016 CalGreen
SECTION PLUMBING FIXTURES
PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Specification Sections, apply to this Section. B. Related Sections:
Ph: Fax Web: East Philadelphia Street Ontario, California USA
TEST REPORT Ph: 909.472.4100 Fax 909.472.4243 Web: www.iapmo.org 5001 East Philadelphia Street Ontario, California 91761-2816 - USA Report Number: 1724-12001 Report Issued: July 27, 2012 Project No.: 20581
Short title. This chapter may be cited as the "Kern County Plumbing Code."
Chapter 17.20 PLUMBING CODE Sections: 17.20.010 Short title. 17.20.020 Applicability. 17.20.030 Uniform Plumbing CodeBAdopted. 17.20.040 Uniform Plumbing CodeBProvisions not adopted. 17.20.050 Uniform
SECTION 6: HYDRAULICS CONTENTS
SECTION 6: HYDRAULICS CONTENTS 6.1 INTRODUCTION 2 6.2 HYDRAULIC SERVICES 2 6.2.1 Standards and Regulations 2 6.2.2 Sanitary Plumbing Drainage and Fixtures 3 6.2.3 Roof and Paved Surface Drainage System
Water Efficient Products/ Fixtures- Codes & Standards
Water Efficient Products/ Fixtures- Codes & Standards CHANGING PATTERNS OF WATER CONSUMPTION AND USE WATER INDIA EXPO-2017 May 10, 2017 By: Dr. Abdul Matheen, ME, Ph.D. Director Mechanical IAPMO India
Chapter 14 Seasonal Food Establishment
Chapter 14 Seasonal Food Establishment Parts 14-1 Definitions 14-2 Plan Review 14-3 Food Protection 14-4 Sanitation Requirements 14-5 Personnel 14-1 Definitions 14-101 Purpose 14-102 Applicability and
TECHNICAL ASSISTANCE TOLL FREE TELEPHONE NUMBER TECHNICAL ASSISTANCE FAX:
ACORN SAFETY P.O. BOX 3527 CITY OF INDUSTRY, CA 91744-0527 UNITED STATES OF AMERICA WWW.ACORNSAFETY.COM INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS COMBINATION STATIONS MODELS S1330-FPB/S1340-FPB/S2330-FPB/S2340-FPB/2330-FPB-ASP
CHAPTER 11 MOBILE HOME PARKS
CHAPTER 11 MOBILE HOME PARKS ARTICLE A Section 11-1 GENERAL PROVISIONS Purpose The purpose of this Chapter is to provide for the protection and promotion of the public health by establishing regulations
EVALUATION SUBJECT: TEEL BQ POLYPROPYLENE (PP-RCT) PIPING SYSTEM
ICC-ES Report PMG-1452 Issued 01/2018 This report is subject to renewal 01/2019 EVALUATION SUBJECT: TEEL BQ POLYPROPYLENE (PP-RCT) PIPING SYSTEM DIVISION: 22 00 00 PLUMBING SECTION: 22 11 00 FACILITY WATER
1.04 SUBMITTALS PLUMBING FIXTURES
SECTION 15440 - PLUMBING FIXTURES PART 1 GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections,
Accessible Toilet and Bathing Rooms
Accessible Toilet and Bathing Rooms Building & Fire Safety Division Yakima County Public Services This brochure is for illustration purpose only. It is NOT a complete section of the referenced codes, nor
What is No-Lead Brass...and how does it affect me?
What is No-Lead Brass...and how does it affect me? A.Y. McDonald Mfg. Co. No-Lead Brass products meet the requirements of UNS Copper Alloy C89836 per ASTM B584-05 and Copper Alloy CDA No. C89833. UNS Copper
Rusty Osborne October 1, 2010 Sustain This!
UT Austin Utilities and Energy Management Rusty Osborne October 1, 2010 Sustain This! The Impact of Water Conservation and Efficiency i on Water Treatment and Green Building at UT Austin Main Campus Statistics
Code Compliance Research Report CCRR-0225
Code Compliance Research Report CCRR-0225 Issue Date: 03-01-2017 Renewal Date: 02-10-2018 DIVISION: 09 00 00 FINISHES Section: 09 69 00 Access Flooring Haworth Inc. One Haworth Center Holland, MI 49423