IMPLEMENTATION GUIDELINES FOR ANSI ASC X12 EDI CONVENTIONS PAY AS BUILT INVENTORY ADVICE (846) TRANSACTION SET

Transcription

1 IMPLEMENTATION GUIDELINES FOR ANSI ASC X12 EDI CONVENTIONS PAY AS BUILT INVENTORY ADVICE (846) TRANSACTION SET FCA US INFORMATION & COMMUNICATION TECHNOLOGY MANAGEMENT ANSI ASC X12 VERSION/RELEASE

2 FCA US - Pay As Built Inventory Advice 846 Inventory Inquiry/Advice Functional Group ID=IB Introduction: This X12 Transaction Set contains the format and establishes the data contents of the Inventory Inquiry/Advice Transaction Set (846) for use within the context of an Electronic Data Interchange (EDI) environment. The transaction set can be used in the following ways: (1) for a seller of goods and services to provide inventory information to a prospective purchaser, with no obligation to the purchaser to acquire these goods or services; (2) for a representative of a seller of goods and services to supply inventory information to that seller; (3) for one location to supply another location with inventory information; and (4) for an inquiry as to the availability of inventory with no obligation on the seller of goods and services to reserve that inventory. Notes: In September 2005, this transaction has been restructured due to limitations with the maximum repetitions defined by ASC X12 for the detail. In the original implementation, the LIN was used for all three of the part number, job sequence number and VIN. With this structure, FCA US has quickly approached exhausting the limitations defined. In order to accommodate current data requirements, as well as to better handle future growth, the transaction has been restructured to make use of the detail SLN loop for part number and quantity. The following table illustrates segment usage for each of the four applications: Change history: 08/2005: Restructure of Pay As Built transaction: - Move production date from detail to header for Assembly, Modular Build and Paint - Change contents of LIN02/LIN03 to be used for VIN - Move part number from LIN to SLN, utilizing SLN loop - Move quantity from QTY segment to SLN segment 05/2006: 02/23/2015 V/R FCA US

3 FCA US - Pay As Built Inventory Advice Move paint type and usage quantity to SLN loop 05/2009: Transition to Chrysler LLC with removal of references to Daimler. 07/28/2010: Name change from Chrysler LLC to Chrysler Updated Address 02/23/2015: Name Change To FCA US Heading: Page Pos. Seg. Base User Loop Notes and No. No. ID Name Guide Status Max.Use Repeat Comments ST Transaction Set Header M M BIA Beginning Segment for Inventory M M 1 Inquiry/Advice 0400 CUR Currency O Not DTM Date/Time Reference O REF Reference Information O PER Administrative Communications O Not 3 Contact 0750 MEA Measurements O Not 20 LOOP ID - N N1 Party Identification O N2 Additional Name Information O Not N3 Party Location O Not N4 Geographic Location O Not REF Reference Information O Not PER Administrative Communications Contact O Not 3 LOOP ID - LM LM Code Source Information O Not LQ Industry Code Identification M Not 100 Detail: Page Pos. Seg. Base User Loop Notes and No. No. ID Name Guide Status Max.Use Repeat Comments LOOP ID - LIN > LIN Item Identification M M PID Product/Item Description O Not MEA Measurements O Not PKG Marking, Packaging, Loading O Not DTM Date/Time Reference O CTP Pricing Information O Not CUR Currency O Not SAC Service, Promotion, Allowance, or O Not 25 02/23/2015 V/R FCA US

4 FCA US - Pay As Built Inventory Advice Charge Information 1400 REF Reference Information O Not > PER Administrative Communications Contact O Not SDQ Destination Quantity O Not MAN Marks and Numbers Information O Not UIT Unit Detail O Not CS Contract Summary O Not DD Demand Detail O Not > G53 Maintenance Type O Not PCT Percent Amounts O Not > LDT Lead Time O Not 12 LOOP ID - LM LM Code Source Information O Not LQ Industry Code Identification M Not 100 LOOP ID - SLN SLN Subline Item Detail O PID Product/Item Description O MEA Measurements O PKG Marking, Packaging, Loading O Not 25 LOOP ID - MAN MAN Marks and Numbers Information O Not MEA Measurements O Not 40 LOOP ID - QTY QTY Quantity Information O UIT Unit Detail O Not MEA Measurements O Not LDT Lead Time O Not DTM Date/Time Reference O Not 10 LOOP ID - SCH SCH Line Item Schedule O Not MEA Measurements O Not 25 LOOP ID - LM > LM Code Source Information O Not LQ Industry Code Identification M Not LS Loop Header O Not 1 LOOP ID - REF > REF Reference Information O Not 1 n DTM Date/Time Reference O Not > N1 Party Identification O Not 1 LOOP ID - LM LM Code Source Information O Not LQ Industry Code Identification M Not LE Loop Trailer O Not 1 LOOP ID - N /23/2015 V/R FCA US

5 FCA US - Pay As Built Inventory Advice 4500 N1 Party Identification O Not N2 Additional Name Information O Not N3 Party Location O Not N4 Geographic Location O Not REF Reference Information O Not PER Administrative Communications Contact O Not 3 Summary: Page Pos. Seg. Base User Loop Notes and No. No. ID Name Guide Status Max.Use Repeat Comments CTT Transaction Totals O 1 n SE Transaction Set Trailer M M 1 Transaction Set Notes 1. The REF loop conveys serial number, lot number, and inventory data. 2. Number of line items (CTT01) is the accumulation of number of LIN segments. If used, hash total (CTT02) is the sum of the values of the quantities (QTY02) of each QTY segment. 02/23/2015 V/R FCA US

6 FCA US - Pay As Built Inventory Advice Segment: ST Transaction Set Header Position: 0100 Loop: Level: Heading Usage: Mandatory Max Use: 1 Purpose: To indicate the start of a transaction set and to assign a control number Syntax Notes: Semantic Notes: 1 The transaction set identifier (ST01) is used by the translation routines of the interchange partners to select the appropriate transaction set definition (e.g., 810 selects the Invoice Transaction Set). 2 The implementation convention reference (ST03) is used by the translation routines of the interchange partners to select the appropriate implementation convention to match the transaction set definition. When used, this implementation convention reference takes precedence over the implementation reference specified in the GS08. Comments: Data Element Summary Ref. Data Base User Des. Element Name Attributes Attributes ST Transaction Set Identifier Code M 1 ID 3/3 M Code uniquely identifying a Transaction Set 846 Inventory Inquiry/Advice ST Transaction Set Control Number M 1 AN 4/9 M Identifying control number that must be unique within the transaction set functional group assigned by the originator for a transaction set ST Implementation Convention Reference O 1 AN 1/35 Not 02/23/2015 V/R FCA US

7 FCA US - Pay As Built Inventory Advice Segment: BIA Beginning Segment for Inventory Inquiry/Advice Position: 0200 Loop: Level: Heading Usage: Mandatory Max Use: 1 Purpose: To indicate the beginning of an Inventory Inquiry/Advice Transaction Set Syntax Notes: Semantic Notes: 1 BIA03 identifies the number of the inquiry/advice that is transferred. 2 BIA04 identifies the date of the inquiry/advice that is transferred. 3 BIA05 identifies the time of the inquiry/advice that is transferred. Comments: Data Element Summary Ref. Data Base User Des. Element Name Attributes Attributes BIA Transaction Set Purpose Code M 1 ID 2/2 M Code identifying purpose of transaction set 00 Original BIA Report Type Code M 1 ID 2/2 M Code indicating the title or contents of a document, report or supporting item 01 Product Transfer BIA Reference Identification M 1 AN 1/50 M Reference information as defined for a particular Transaction Set or as specified by the Reference Identification Qualifier BIA Date M 1 DT 8/8 M Date expressed as CCYYMMDD where CC represents the first two digits of the calendar year BIA Time O 1 TM 4/8 Not BIA Action Code O 1 ID 1/2 Not 02/23/2015 V/R FCA US

8 FCA US - Pay As Built Inventory Advice Segment: DTM Date/Time Reference Position: 0500 Loop: Level: Heading Usage: Optional Max Use: 10 Purpose: To specify pertinent dates and times Syntax Notes: 1 At least one of DTM02 DTM03 or DTM05 is required. 2 If DTM04 is present, then DTM03 is required. 3 If either DTM05 or DTM06 is present, then the other is required. Semantic Notes: Comments: Data Element Summary Ref. Data Base User Des. Element Name Attributes Attributes DTM Date/Time Qualifier M 1 ID 3/3 M Code specifying type of date or time, or both date and time 405 Production DTM Date X 1 DT 8/8 Date expressed as CCYYMMDD where CC represents the first two digits of the calendar year DTM Time X 1 TM 4/8 Not DTM Time Code O 1 ID 2/2 Not DTM Date Time Period Format Qualifier X 1 ID 2/3 Not DTM Date Time Period X 1 AN 1/35 Not 02/23/2015 V/R FCA US

9 FCA US - Pay As Built Inventory Advice Segment: REF Reference Information Position: 0600 Loop: Level: Heading Usage: Optional Max Use: 12 Purpose: To specify identifying information Syntax Notes: 1 At least one of REF02 or REF03 is required. 2 If either C04003 or C04004 is present, then the other is required. 3 If either C04005 or C04006 is present, then the other is required. Semantic Notes: 1 REF04 contains data relating to the value cited in REF02. Comments: Data Element Summary Ref. Data Base User Des. Element Name Attributes Attributes REF Reference Identification Qualifier M 1 ID 2/3 M Code qualifying the Reference Identification IK Invoice Number REF Reference Identification X 1 AN 1/50 Reference information as defined for a particular Transaction Set or as specified by the Reference Identification Qualifier REF Description X 1 AN 1/80 Not REF04 C040 Reference Identifier O 1 Not Use d To identify one or more reference numbers or identification numbers as specified by the Reference Qualifier C Reference Identification Qualifier M ID 2/3 Not Code qualifying the Reference Identification C Reference Identification M AN 1/50 Not Reference information as defined for a particular Transaction Set or as specified by the Reference Identification Qualifier C Reference Identification Qualifier X ID 2/3 Not Code qualifying the Reference Identification C Reference Identification X AN 1/50 Not Reference information as defined for a particular Transaction Set or as specified by 02/23/2015 V/R FCA US

10 FCA US - Pay As Built Inventory Advice the Reference Identification Qualifier C Reference Identification Qualifier X ID 2/3 Not Code qualifying the Reference Identification C Reference Identification X AN 1/50 Not Reference information as defined for a particular Transaction Set or as specified by the Reference Identification Qualifier 02/23/2015 V/R FCA US

11 FCA US - Pay As Built Inventory Advice Segment: N1 Party Identification Position: 0800 Loop: N1 Optional Level: Heading Usage: Optional Max Use: 1 Purpose: To identify a party by type of organization, name, and code Syntax Notes: 1 At least one of N102 or N103 is required. 2 If either N103 or N104 is present, then the other is required. Semantic Notes: Comments: 1 This segment, used alone, provides the most efficient method of providing organizational identification. To obtain this efficiency the "ID Code" (N104) must provide a key to the table maintained by the transaction processing party. 2 N105 and N106 further define the type of entity in N101. Data Element Summary Ref. Data Base User Des. Element Name Attributes Attributes N Entity Identifier Code M 1 ID 2/3 M Code identifying an organizational entity, a physical location, property or an individual MP Manufacturing Plant SU Supplier/Manufacturer N Name X 1 AN 1/60 Not N Identification Code Qualifier X 1 ID 1/2 Code designating the system/method of code structure used for Identification Code (67) 92 Assigned by Buyer or Buyer's Agent N Identification Code X 1 AN 2/80 Code identifying a party or other code N Entity Relationship Code O 1 ID 2/2 Not N Entity Identifier Code O 1 ID 2/3 Not 02/23/2015 V/R FCA US

12 FCA US - Pay As Built Inventory Advice Segment: LIN Item Identification Position: 0100 Loop: LIN Mandatory Level: Detail Usage: Mandatory Max Use: 1 Purpose: To specify basic item identification data Syntax Notes: 1 If either LIN04 or LIN05 is present, then the other is required. 2 If either LIN06 or LIN07 is present, then the other is required. 3 If either LIN08 or LIN09 is present, then the other is required. 4 If either LIN10 or LIN11 is present, then the other is required. 5 If either LIN12 or LIN13 is present, then the other is required. 6 If either LIN14 or LIN15 is present, then the other is required. 7 If either LIN16 or LIN17 is present, then the other is required. 8 If either LIN18 or LIN19 is present, then the other is required. 9 If either LIN20 or LIN21 is present, then the other is required. 10 If either LIN22 or LIN23 is present, then the other is required. 11 If either LIN24 or LIN25 is present, then the other is required. 12 If either LIN26 or LIN27 is present, then the other is required. 13 If either LIN28 or LIN29 is present, then the other is required. 14 If either LIN30 or LIN31 is present, then the other is required. Semantic Notes: 1 LIN01 is the line item identification Comments: 1 See the Data Dictionary for a complete list of IDs. 2 LIN02 through LIN31 provide for fifteen different product/service IDs for each item. For example: Case, Color, Drawing No., ISBN No., Model No., or SKU. Data Element Summary Ref. Data Base User Des. Element Name Attributes Attributes LIN Assigned Identification O 1 AN 1/20 Alphanumeric characters assigned for differentiation within a transaction set LIN M 1 ID 2/2 M Code identifying the type/source of the descriptive number used in Product/Service ID (234) BP Buyer's Part Number for Manufacturing only. VV Motor Vehicle ID Number LIN Product/Service ID M 1 AN 1/48 M Identifying number for a product or service For Assembly and Modular Build: If LIN02 = 'VV', the VIN For Manufacturing and Total Chemical Management: If LIN02 = 'BP', the part number 02/23/2015 V/R FCA US

13 FCA US - Pay As Built Inventory Advice LIN X 1 ID 2/2 Code identifying the type/source of the descriptive number used in Product/Service ID (234) JS Job Sequence Number LIN Product/Service ID X 1 AN 1/48 Identifying number for a product or service If LIN04 = 'JS', job sequence number Not used for Manufacturing. LIN X 1 ID 2/2 Not LIN Product/Service ID X 1 AN 1/48 Not LIN X 1 ID 2/2 Not LIN Product/Service ID X 1 AN 1/48 Not LIN X 1 ID 2/2 Not LIN Product/Service ID X 1 AN 1/48 Not LIN X 1 ID 2/2 Not LIN Product/Service ID X 1 AN 1/48 Not LIN X 1 ID 2/2 Not LIN Product/Service ID X 1 AN 1/48 Not LIN X 1 ID 2/2 Not LIN Product/Service ID X 1 AN 1/48 Not LIN X 1 ID 2/2 Not LIN Product/Service ID X 1 AN 1/48 Not LIN X 1 ID 2/2 Not LIN Product/Service ID X 1 AN 1/48 Not LIN X 1 ID 2/2 Not 02/23/2015 V/R FCA US

14 FCA US - Pay As Built Inventory Advice LIN Product/Service ID X 1 AN 1/48 Not LIN X 1 ID 2/2 Not LIN Product/Service ID X 1 AN 1/48 Not LIN X 1 ID 2/2 Not LIN Product/Service ID X 1 AN 1/48 Not LIN X 1 ID 2/2 Not LIN Product/Service ID X 1 AN 1/48 Not LIN X 1 ID 2/2 Not LIN Product/Service ID X 1 AN 1/48 Not 02/23/2015 V/R FCA US

15 FCA US - Pay As Built Inventory Advice Segment: DTM Date/Time Reference Position: 1000 Loop: LIN Mandatory Level: Detail Usage: Optional Max Use: 10 Purpose: To specify pertinent dates and times Syntax Notes: 1 At least one of DTM02 DTM03 or DTM05 is required. 2 If DTM04 is present, then DTM03 is required. 3 If either DTM05 or DTM06 is present, then the other is required. Semantic Notes: Comments: Data Element Summary Ref. Data Base User Des. Element Name Attributes Attributes DTM Date/Time Qualifier M 1 ID 3/3 M Code specifying type of date or time, or both date and time 405 Production DTM Date X 1 DT 8/8 Date expressed as CCYYMMDD where CC represents the first two digits of the calendar year DTM Time X 1 TM 4/8 Time expressed in 24-hour clock time as follows: HHMM, or HHMMSS, or HHMMSSD, or HHMMSSDD, where H = hours (00-23), M = minutes (00-59), S = integer seconds (00-59) and DD = decimal seconds; decimal seconds are expressed as follows: D = tenths (0-9) and DD = hundredths (00-99) DTM Time Code O 1 ID 2/2 Code identifying the time. In accordance with International Standards Organization standard 8601, time can be specified by a + or - and an indication in hours in relation to Universal Time Coordinate (UTC) time; since + is a restricted character, + and - are substituted by P and M in the codes that follow DTM Date Time Period Format Qualifier X 1 ID 2/3 Code indicating the date format, time format, or date and time format DTM Date Time Period X 1 AN 1/35 Expression of a date, a time, or range of dates, times or dates and times 02/23/2015 V/R FCA US

16 FCA US - Pay As Built Inventory Advice Segment: SLN Subline Item Detail Position: 2800 Loop: SLN Optional Level: Detail Usage: Optional Max Use: 1 Purpose: To specify product subline detail item data Syntax Notes: 1 If either SLN04 or SLN05 is present, then the other is required. 2 If SLN07 is present, then SLN06 is required. 3 If SLN08 is present, then SLN06 is required. 4 If either SLN09 or SLN10 is present, then the other is required. 5 If either SLN11 or SLN12 is present, then the other is required. 6 If either SLN13 or SLN14 is present, then the other is required. 7 If either SLN15 or SLN16 is present, then the other is required. 8 If either SLN17 or SLN18 is present, then the other is required. 9 If either SLN19 or SLN20 is present, then the other is required. 10 If either SLN21 or SLN22 is present, then the other is required. 11 If either SLN23 or SLN24 is present, then the other is required. 12 If either SLN25 or SLN26 is present, then the other is required. 13 If either SLN27 or SLN28 is present, then the other is required. Semantic Notes: 1 SLN01 is the identifying number for the subline item. 2 SLN02 is the identifying number for the subline level. The subline level is analogous to the level code used in a bill of materials. 3 SLN03 is the configuration code indicating the relationship of the subline item to the baseline item. 4 SLN08 is a code indicating the relationship of the price or amount to the associated segment. Comments: 1 See the Data Element Dictionary for a complete list of IDs. 2 SLN01 is related to (but not necessarily equivalent to) the baseline item number. Example: 1.1 or 1A might be used as a subline number to relate to baseline number 1. 3 SLN09 through SLN28 provide for ten different product/service IDs for each item. For example: Case, Color, Drawing No., ISBN No., Model No., or SKU. Data Element Summary Ref. Data Base User Des. Element Name Attributes Attributes SLN Assigned Identification M 1 AN 1/20 M Alphanumeric characters assigned for differentiation within a transaction set SLN Assigned Identification O 1 AN 1/20 Not SLN Relationship Code M 1 ID 1/1 M Code indicating the relationship between entities I Included SLN Quantity X 1 R 1/15 02/23/2015 V/R FCA US

17 FCA US - Pay As Built Inventory Advice Numeric value of quantity SLN05 C001 Composite Unit of Measure X 1 To identify a composite unit of measure (See Figures Appendix for examples of use) C Unit or Basis for Measurement Code M ID 2/2 M Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken C Exponent O R 1/15 Not C Multiplier O R 1/10 Not C Unit or Basis for Measurement Code O ID 2/2 Not C Exponent O R 1/15 Not C Multiplier O R 1/10 Not C Unit or Basis for Measurement Code O ID 2/2 Not C Exponent O R 1/15 Not C Multiplier O R 1/10 Not C Unit or Basis for Measurement Code O ID 2/2 Not C Exponent O R 1/15 Not C Multiplier O R 1/10 Not C Unit or Basis for Measurement Code O ID 2/2 Not C Exponent O R 1/15 Not C Multiplier O R 1/10 Not SLN Unit Price X 1 R 1/17 Not SLN Basis of Unit Price Code O 1 ID 2/2 Not SLN Relationship Code O 1 ID 1/1 Not SLN X 1 ID 2/2 Code identifying the type/source of the descriptive number used in Product/Service ID (234) 02/23/2015 V/R FCA US

18 FCA US - Pay As Built Inventory Advice BP Buyer's Part Number SLN Product/Service ID X 1 AN 1/48 Identifying number for a product or service FCA US part number SLN X 1 ID 2/2 Not SLN Product/Service ID X 1 AN 1/48 Not SLN X 1 ID 2/2 Not SLN Product/Service ID X 1 AN 1/48 Not SLN X 1 ID 2/2 Not SLN Product/Service ID X 1 AN 1/48 Not SLN X 1 ID 2/2 Not SLN Product/Service ID X 1 AN 1/48 Not SLN X 1 ID 2/2 Not SLN Product/Service ID X 1 AN 1/48 Not SLN X 1 ID 2/2 Not SLN Product/Service ID X 1 AN 1/48 Not SLN X 1 ID 2/2 Not SLN Product/Service ID X 1 AN 1/48 Not SLN X 1 ID 2/2 Not SLN Product/Service ID X 1 AN 1/48 Not SLN X 1 ID 2/2 Not SLN Product/Service ID X 1 AN 1/48 Not 02/23/2015 V/R FCA US

19 FCA US - Pay As Built Inventory Advice Segment: PID Product/Item Description Position: 2900 Loop: SLN Optional Level: Detail Usage: Optional Max Use: 200 Purpose: To describe a product or process in coded or free-form format Syntax Notes: 1 If PID04 is present, then PID03 is required. 2 At least one of PID04 or PID05 is required. 3 If PID07 is present, then PID03 is required. 4 If PID08 is present, then PID04 is required. 5 If PID09 is present, then PID05 is required. Semantic Notes: 1 Use PID03 to indicate the organization that publishes the code list being referred to. 2 PID04 should be used for industry-specific product description codes. 3 PID08 describes the physical characteristics of the product identified in PID04. A "Y" indicates that the specified attribute applies to this item; an "N" indicates it does not apply. Any other value is indeterminate. 4 PID09 is used to identify the language being used in PID05. Comments: 1 If PID01 equals "F", then PID05 is used. If PID01 equals "S", then PID04 is used. If PID01 equals "X", then both PID04 and PID05 are used. 2 Use PID06 when necessary to refer to the product surface or layer being described in the segment. 3 PID07 specifies the individual code list of the agency specified in PID03. Data Element Summary Ref. Data Base User Des. Element Name Attributes Attributes PID Item Description Type M 1 ID 1/1 M Code indicating the format of a description F Free-form PID Product/Process Characteristic Code O 1 ID 2/3 Code identifying the general class of a product or process characteristic 12 Type and/or Process PID Agency Qualifier Code X 1 ID 2/2 Not PID Product Description Code X 1 AN 1/12 Not PID Description X 1 AN 1/80 A free-form description to clarify the related data elements and their content For paint vendors only: Columns 1-2: The first two positions of the Model field Columns 3-4: The last two positions of the Model field Column 5: Value 'A' for monotone or 'D' for two-tone 02/23/2015 V/R FCA US

20 FCA US - Pay As Built Inventory Advice Columns 6-8: Primary base paint sales code PID Surface/Layer/Position Code O 1 ID 2/2 Not PID Source Subqualifier O 1 AN 1/15 Not PID Yes/No Condition or Response Code O 1 ID 1/1 Not PID Language Code O 1 ID 2/3 Not 02/23/2015 V/R FCA US

21 FCA US - Pay As Built Inventory Advice Segment: MEA Measurements Position: 3000 Loop: SLN Optional Level: Detail Usage: Optional Max Use: 40 Purpose: To specify physical measurements or counts, including dimensions, tolerances, variances, and weights (See Figures Appendix for example of use of C001) Syntax Notes: 1 At least one of MEA03 MEA05 MEA06 or MEA08 is required. 2 Only one of MEA04 or MEA12 may be present. 3 If MEA05 is present, then at least one of MEA04 or MEA12 is required. 4 If MEA06 is present, then at least one of MEA04 or MEA12 is required. 5 If MEA07 is present, then at least one of MEA03 MEA05 or MEA06 is required. 6 Only one of MEA08 or MEA03 may be present. 7 If either MEA11 or MEA12 is present, then the other is required. Semantic Notes: 1 MEA04 defines the unit of measure for MEA03, MEA05, and MEA06. 2 MEA11 is the external code list for the unit of measure. 3 MEA12 defines the unit of measure for MEA03, MEA05, and MEA06 from an external code list. Comments: 1 When citing dimensional tolerances, any measurement requiring a sign (+ or -), or any measurement where a positive (+) value cannot be assumed, use MEA05 as the negative (-) value and MEA06 as the positive (+) value. Data Element Summary Ref. Data Base User Des. Element Name Attributes Attributes MEA Measurement Reference ID Code O 1 ID 2/2 Code identifying the broad category to which a measurement applies PD Physical Dimensions MEA Measurement Qualifier O 1 ID 1/3 Code identifying a specific product or process characteristic to which a measurement applies QUR Reportable Quantity MEA Measurement Value X 1 R 1/20 The value of the measurement Possible three decimal positions will be sent. MEA04 C001 Composite Unit of Measure X 1 To identify a composite unit of measure (See Figures Appendix for examples of use) C Unit or Basis for Measurement Code M ID 2/2 M Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken SM Square Meter C Exponent O R 1/15 Not 02/23/2015 V/R FCA US

22 FCA US - Pay As Built Inventory Advice C Multiplier O R 1/10 Not C Unit or Basis for Measurement Code O ID 2/2 Not C Exponent O R 1/15 Not C Multiplier O R 1/10 Not C Unit or Basis for Measurement Code O ID 2/2 Not C Exponent O R 1/15 Not C Multiplier O R 1/10 Not C Unit or Basis for Measurement Code O ID 2/2 Not C Exponent O R 1/15 Not C Multiplier O R 1/10 Not C Unit or Basis for Measurement Code O ID 2/2 Not C Exponent O R 1/15 Not C Multiplier O R 1/10 Not MEA Range Minimum X 1 R 1/20 Not MEA Range Maximum X 1 R 1/20 Not MEA Measurement Significance Code O 1 ID 2/2 Not MEA Measurement Attribute Code X 1 ID 2/2 Not MEA Surface/Layer/Position Code O 1 ID 2/2 Not MEA Measurement Method or Device O 1 ID 2/4 Not MEA Code List Qualifier Code X 1 ID 1/3 Not MEA Industry Code X 1 AN 1/30 Not 02/23/2015 V/R FCA US

23 FCA US - Pay As Built Inventory Advice Segment: QTY Quantity Information Position: 3200 Loop: QTY Optional Level: Detail Usage: Optional Max Use: 1 Purpose: To specify quantity information Syntax Notes: 1 At least one of QTY02 or QTY04 is required. 2 Only one of QTY02 or QTY04 may be present. Semantic Notes: 1 QTY04 is used when the quantity is non-numeric. Comments: Data Element Summary Ref. Data Base User Des. Element Name Attributes Attributes QTY Quantity Qualifier M 1 ID 2/2 M Code specifying the type of quantity 99 Quantity QTY Quantity X 1 R 1/15 Numeric value of quantity QTY03 C001 Composite Unit of Measure O 1 To identify a composite unit of measure (See Figures Appendix for examples of use) C Unit or Basis for Measurement Code M ID 2/2 M Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken C Exponent O R 1/15 Not C Multiplier O R 1/10 Not C Unit or Basis for Measurement Code O ID 2/2 Not C Exponent O R 1/15 Not C Multiplier O R 1/10 Not C Unit or Basis for Measurement Code O ID 2/2 Not C Exponent O R 1/15 Not C Multiplier O R 1/10 Not C Unit or Basis for Measurement Code O ID 2/2 Not 02/23/2015 V/R FCA US

24 FCA US - Pay As Built Inventory Advice C Exponent O R 1/15 Not C Multiplier O R 1/10 Not C Unit or Basis for Measurement Code O ID 2/2 Not C Exponent O R 1/15 Not C Multiplier O R 1/10 Not QTY04 61 Free-form Information X 1 AN 1/30 Not 02/23/2015 V/R FCA US

25 FCA US - Pay As Built Inventory Advice Segment: CTT Transaction Totals Position: 0100 Loop: Level: Summary Usage: Optional Max Use: 1 Purpose: To transmit a hash total for a specific element in the transaction set Syntax Notes: 1 If either CTT03 or CTT04 is present, then the other is required. 2 If either CTT05 or CTT06 is present, then the other is required. Semantic Notes: Comments: 1 This segment is intended to provide hash totals to validate transaction completeness and correctness. Data Element Summary Ref. Data Base User Des. Element Name Attributes Attributes CTT Number of Line Items M 1 N0 1/6 M Total number of line items in the transaction set CTT Hash Total O 1 R 1/10 Sum of values of the specified data element. All values in the data element will be summed without regard to decimal points (explicit or implicit) or signs. Truncation will occur on the left most digits if the sum is greater than the maximum size of the hash total of the data element. Example: First occurrence of value being hashed..18 Second occurrence of value being hashed. 1.8 Third occurrence of value being hashed Fourth occurrence of value being hashed. 18E2 Fifth occurrence of value being hashed Hash Total CTT03 81 Weight X 1 R 1/10 Numeric value of weight CTT Unit or Basis for Measurement Code X 1 ID 2/2 Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken CTT Volume X 1 R 1/8 Value of volumetric measure CTT Unit or Basis for Measurement Code X 1 ID 2/2 02/23/2015 V/R FCA US

26 FCA US - Pay As Built Inventory Advice Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken CTT Description O 1 AN 1/80 A free-form description to clarify the related data elements and their content 02/23/2015 V/R FCA US

27 FCA US - Pay As Built Inventory Advice Segment: SE Transaction Set Trailer Position: 0200 Loop: Level: Summary Usage: Mandatory Max Use: 1 Purpose: To indicate the end of the transaction set and provide the count of the transmitted segments (including the beginning (ST) and ending (SE) segments) Syntax Notes: Semantic Notes: Comments: 1 SE is the last segment of each transaction set. Data Element Summary Ref. Data Base User Des. Element Name Attributes Attributes SE01 96 Number of Included Segments M 1 N0 1/10 M Total number of segments included in a transaction set including ST and SE segments SE Transaction Set Control Number M 1 AN 4/9 M Identifying control number that must be unique within the transaction set functional group assigned by the originator for a transaction set 02/23/2015 V/R FCA US

28 FCA US Pay As Built Inventory Advice Example 1: Pay As Built - Assembly ST~846~0001 BIA~00~01~002566~ DTM~405~ REF~IK~555222A N1~MP~~92~04012 N1~SU~~92~12345 Transaction Set Identifier Code = 846 (Inventory Inquiry/Advice) Transaction Set Control Number = 0001 Transaction Set Purpose Code = 00 (Original) Report Type Code = 01 (Product Transfer) Reference Identification = Date = 08/25/2005 Date/Time Qualifier = 405 (Production) Date = 08/24/2005 Reference Identification Qualifier = IK (Invoice Number) Reference Identification = A Entity Identifier Code = MP (Manufacturing Plant) Identification Code Qualifier = 92 (Assigned by Buyer or Buyer's Agent) Identification Code = Entity Identifier Code = SU (Supplier/Manufacturer) Identification Code Qualifier = 92 (Assigned by Buyer or Buyer's Agent) Identification Code = LIN~1~VV~6J101895~JS~ Assigned Identification = 1 = VV (Motor Vehicle ID Number) Product/Service ID = 6J = JS (Job Sequence Number) Product/Service ID = SLN~1~~I~1~EA~~~~BP~5KN401D5AA Assigned Identification = 1 Product/Service ID = 5KN401D5AA SLN~2~~I~1~EA~~~~BP~5KN401J3AA Assigned Identification = 2 Product/Service ID = 5KN401J3AA 02/23/2015 V/R FCA US

29 FCA US Pay As Built Inventory Advice Example 1: Pay As Built Assembly (continued) SLN~3~~I~1~EA~~~~BP~5KN411D5AA Assigned Identification = 3 Product/Service ID = 5KN411D5AA SLN~4~~I~1~EA~~~~BP~5KN411J3AA Assigned Identification = 4 Product/Service ID = 5KN411J3AA SLN~5~~I~1~EA~~~~BP~5KN421D5AA Assigned Identification = 5 Product/Service ID = 5KN421D5AA LIN~2~VV~6J101935~JS~ Assigned Identification = 2 = VV (Motor Vehicle ID Number) Product/Service ID = 6J = JS (Job Sequence Number) Product/Service ID = SLN~1~~I~1~EA~~~~BP~5KN401D5AA Assigned Identification = 1 Product/Service ID = 5KN401D5AA SLN~2~~I~1~EA~~~~BP~5KN401J3AA Assigned Identification = 2 Product/Service ID = 5KN401J3AA 02/23/2015 V/R FCA US

30 FCA US Pay As Built Inventory Advice Example 1: Pay As Built Assembly (continued) SLN~3~~I~1~EA~~~~BP~5KN411D5AA Assigned Identification = 3 Product/Service ID = 5KN411D5AA SLN~4~~I~1~EA~~~~BP~5KN411J3AA Assigned Identification = 4 Product/Service ID = 5KN411J3AA SLN~5~~I~1~EA~~~~BP~5KN421D5AA Assigned Identification = 5 Product/Service ID = 5KN421D5AA LIN~3~VV~6J102348~JS~ Assigned Identification = 3 = VV (Motor Vehicle ID Number) Product/Service ID = 6J = JS (Job Sequence Number) Product/Service ID = SLN~1~~I~1~EA~~~~BP~5KN401D5AA Assigned Identification = 1 Product/Service ID = 5KN401D5AA SLN~2~~I~1~EA~~~~BP~5KN401J3AA Assigned Identification = 2 Product/Service ID = 5KN401J3AA 02/23/2015 V/R FCA US

31 FCA US Pay As Built Inventory Advice Example 1: Pay As Built Assembly (continued) SLN~3~~I~1~EA~~~~BP~5KN411D5AA Assigned Identification = 3 Product/Service ID = 5KN411D5AA SLN~4~~I~1~EA~~~~BP~5KN411J3AA Assigned Identification = 4 Product/Service ID = 5KN411J3AA SLN~5~~I~1~EA~~~~BP~5KN421D5AA Assigned Identification = 5 Product/Service ID = 5KN421D5AA LIN~4~VV~6J102538~JS~ Assigned Identification = 4 = VV (Motor Vehicle ID Number) Product/Service ID = 6J = JS (Job Sequence Number) Product/Service ID = SLN~1~~I~1~EA~~~~BP~5KN401D5AA Assigned Identification = 1 Product/Service ID = 5KN401D5AA SLN~2~~I~1~EA~~~~BP~5KN401J3AA Assigned Identification = 2 Product/Service ID = 5KN401J3AA 02/23/2015 V/R FCA US

32 FCA US Pay As Built Inventory Advice Example 1: Pay As Built Assembly (continued) SLN~3~~I~1~EA~~~~BP~5KN411D5AA Assigned Identification = 3 Product/Service ID = 5KN411D5AA SLN~4~~I~1~EA~~~~BP~5KN411J3AA Assigned Identification = 4 Product/Service ID = 5KN411J3AA SLN~5~~I~1~EA~~~~BP~5KN421D5AA Assigned Identification = 5 Product/Service ID = 5KN421D5AA LIN~5~VV~6J102710~JS~ Assigned Identification = 5 = VV (Motor Vehicle ID Number) Product/Service ID = 6J = JS (Job Sequence Number) Product/Service ID = SLN~1~~I~1~EA~~~~BP~5KN401D5AA Assigned Identification = 1 Product/Service ID = 5KN401D5AA SLN~2~~I~1~EA~~~~BP~5KN401J3AA Assigned Identification = 2 Product/Service ID = 5KN401J3AA 02/23/2015 V/R FCA US

33 FCA US Pay As Built Inventory Advice Example 1: Pay As Built Assembly (continued) SLN~3~~I~1~EA~~~~BP~5KN411D5AA Assigned Identification = 3 Product/Service ID = 5KN411D5AA SLN~4~~I~1~EA~~~~BP~5KN411J3AA Assigned Identification = 4 Product/Service ID = 5KN411J3AA SLN~5~~I~1~EA~~~~BP~5KN421D5AA Assigned Identification = 5 Product/Service ID = 5KN421D5AA LIN~6~VV~6J102712~JS~ Assigned Identification = 6 = VV (Motor Vehicle ID Number) Product/Service ID = 6J = JS (Job Sequence Number) Product/Service ID = SLN~1~~I~1~EA~~~~BP~5KN401D5AA Assigned Identification = 1 Product/Service ID = 5KN401D5AA SLN~2~~I~1~EA~~~~BP~5KN401J3AA Assigned Identification = 2 Product/Service ID = 5KN401J3AA 02/23/2015 V/R FCA US

34 FCA US Pay As Built Inventory Advice Example 1: Pay As Built Assembly (continued) SLN~3~~I~1~EA~~~~BP~5KN411D5AA Assigned Identification = 3 Product/Service ID = 5KN411D5AA SLN~4~~I~1~EA~~~~BP~5KN411J3AA Assigned Identification = 4 Product/Service ID = 5KN411J3AA SLN~5~~I~1~EA~~~~BP~5KN421D5AA Assigned Identification = 5 Product/Service ID = 5KN421D5AA LIN~7~VV~6J102846~JS~ Assigned Identification = 7 = VV (Motor Vehicle ID Number) Product/Service ID = 6J = JS (Job Sequence Number) Product/Service ID = SLN~1~~I~1~EA~~~~BP~5KN401D5AA Assigned Identification = 1 Product/Service ID = 5KN401D5AA SLN~2~~I~1~EA~~~~BP~5KN401J3AA Assigned Identification = 2 Product/Service ID = 5KN401J3AA 02/23/2015 V/R FCA US

35 FCA US Pay As Built Inventory Advice Example 1: Pay As Built Assembly (continued) SLN~3~~I~1~EA~~~~BP~5KN411D5AA Assigned Identification = 3 Product/Service ID = 5KN411D5AA SLN~4~~I~1~EA~~~~BP~5KN411J3AA Assigned Identification = 4 Product/Service ID = 5KN411J3AA SLN~5~~I~1~EA~~~~BP~5KN421D5AA Assigned Identification = 5 Product/Service ID = 5KN421D5AA LIN~8~VV~6J103034~JS~ Assigned Identification = 8 = VV (Motor Vehicle ID Number) Product/Service ID = 6J = JS (Job Sequence Number) Product/Service ID = SLN~1~~I~1~EA~~~~BP~5KN401D5AA Assigned Identification = 1 Product/Service ID = 5KN401D5AA SLN~2~~I~1~EA~~~~BP~5KN401J3AA Assigned Identification = 2 Product/Service ID = 5KN401J3AA 02/23/2015 V/R FCA US

36 FCA US Pay As Built Inventory Advice Example 1: Pay As Built Assembly (continued) SLN~3~~I~1~EA~~~~BP~5KN411D5AA Assigned Identification = 3 Product/Service ID = 5KN411D5AA SLN~4~~I~1~EA~~~~BP~5KN411J3AA Assigned Identification = 4 Product/Service ID = 5KN411J3AA SLN~5~~I~1~EA~~~~BP~5KN421D5AA Assigned Identification = 5 Product/Service ID = 5KN421D5AA LIN~9~VV~6J103053~JS~ Assigned Identification = 9 = VV (Motor Vehicle ID Number) Product/Service ID = 6J = JS (Job Sequence Number) Product/Service ID = SLN~1~~I~1~EA~~~~BP~5KN401D5AA Assigned Identification = 1 Product/Service ID = 5KN401D5AA SLN~2~~I~1~EA~~~~BP~5KN401J3AA Assigned Identification = 2 Product/Service ID = 5KN401J3AA 02/23/2015 V/R FCA US

37 FCA US Pay As Built Inventory Advice Example 1: Pay As Built Assembly (continued) SLN~3~~I~1~EA~~~~BP~5KN411D5AA Assigned Identification = 3 Product/Service ID = 5KN411D5AA SLN~4~~I~1~EA~~~~BP~5KN411J3AA Assigned Identification = 4 Product/Service ID = 5KN411J3AA SLN~5~~I~1~EA~~~~BP~5KN421D5AA Assigned Identification = 5 Product/Service ID = 5KN421D5AA LIN~10~VV~6J103069~JS~ Assigned Identification = 10 = VV (Motor Vehicle ID Number) Product/Service ID = 6J = JS (Job Sequence Number) Product/Service ID = SLN~1~~I~1~EA~~~~BP~5KN401D5AA Assigned Identification = 1 Product/Service ID = 5KN401D5AA SLN~2~~I~1~EA~~~~BP~5KN401J3AA Assigned Identification = 2 Product/Service ID = 5KN401J3AA 02/23/2015 V/R FCA US

38 FCA US Pay As Built Inventory Advice Example 1: Pay As Built Assembly (continued) SLN~3~~I~1~EA~~~~BP~5KN411D5AA Assigned Identification = 3 Product/Service ID = 5KN411D5AA SLN~4~~I~1~EA~~~~BP~5KN411J3AA Assigned Identification = 4 Product/Service ID = 5KN411J3AA SLN~5~~I~1~EA~~~~BP~5KN421D5AA Assigned Identification = 5 Product/Service ID = 5KN421D5AA CTT~10 Number of Line Items = 10 SE~68~0001 Number of Included Segments = 68 Transaction Set Control Number = /23/2015 V/R FCA US

39 FCA US Pay As Built Inventory Advice Example 2: Pay As Built - Paint ST~846~0002 BIA~00~01~001539~ DTM~405~ REF~IK~025088A N1~MP~~92~04025 N1~SU~~92~12345 Transaction Set Identifier Code = 846 (Inventory Inquiry/Advice) Transaction Set Control Number = 0002 Transaction Set Purpose Code = 00 (Original) Report Type Code = 01 (Product Transfer) Reference Identification = Date = 03/28/2010 Date/Time Qualifier = 405 (Production) Date = 02/28/2010 Reference Identification Qualifier = IK (Invoice Number) Reference Identification = A Entity Identifier Code = MP (Manufacturing Plant) Identification Code Qualifier = 92 (Assigned by Buyer or Buyer's Agent) Identification Code = Entity Identifier Code = SU (Supplier/Manufacturer) Identification Code Qualifier = 92 (Assigned by Buyer or Buyer's Agent) Identification Code = LIN~1~VV~6J104426~JS~ Assigned Identification = 1 = VV (Motor Vehicle ID Number) Product/Service ID = 6J = JS (Job Sequence Number) Product/Service ID = SLN~1~~I~1~EA~~~~BP~ AA Assigned Identification = 1 Product/Service ID = AA PID~F~12~~~JA41APS2 Item Description Type = F (Free-form) Product/Process Characteristic Code = 12 (Type and/or Process) Description = JA41APS2 02/23/2015 V/R FCA US

40 FCA US Pay As Built Inventory Advice Example 2: Pay As Built Paint (continued) MEA~PD~QUR~88.888~SM Measurement Reference ID Code = PD (Physical Dimensions) Measurement Qualifier = QUR (Reportable Quantity) Measurement Value = Unit or Basis for Measurement Code = SM (Square Meter) SLN~2~~I~1~EA~~~~BP~ AA Assigned Identification = 2 Product/Service ID = AA PID~F~12~~~JA41APS2 MEA~PD~QUR~77.777~SM Item Description Type = F (Free-form) Product/Process Characteristic Code = 12 (Type and/or Process) Description = JA41APS2 Measurement Reference ID Code = PD (Physical Dimensions) Measurement Qualifier = QUR (Reportable Quantity) Measurement Value = Unit or Basis for Measurement Code = SM (Square Meter) LIN~2~VV~6J104528~JS~ Assigned Identification = 2 = VV (Motor Vehicle ID Number) Product/Service ID = 6J = JS (Job Sequence Number) Product/Service ID = SLN~1~~I~1~EA~~~~BP~ AA Assigned Identification = 1 Product/Service ID = AA PID~F~12~~~JA41APS2 Item Description Type = F (Free-form) Product/Process Characteristic Code = 12 (Type and/or Process) Description = JA41APS2 02/23/2015 V/R FCA US

41 FCA US Pay As Built Inventory Advice Example 2: Pay As Built Paint (continued) MEA~PD~QUR~88.888~SM Measurement Reference ID Code = PD (Physical Dimensions) Measurement Qualifier = QUR (Reportable Quantity) Measurement Value = Unit or Basis for Measurement Code = SM (Square Meter) SLN~2~~I~1~EA~~~~BP~ AA Assigned Identification = 2 Product/Service ID = AA PID~F~12~~~JA41APS2 MEA~PD~QUR~77.777~SM Item Description Type = F (Free-form) Product/Process Characteristic Code = 12 (Type and/or Process) Description = JA41APS2 Measurement Reference ID Code = PD (Physical Dimensions) Measurement Qualifier = QUR (Reportable Quantity) Measurement Value = Unit or Basis for Measurement Code = SM (Square Meter) LIN~3~VV~YN224129~JS~ Assigned Identification = 3 = VV (Motor Vehicle ID Number) Product/Service ID = YN = JS (Job Sequence Number) Product/Service ID = SLN~1~~I~1~EA~~~~BP~ AA Assigned Identification = 1 Product/Service ID = AA PID~F~12~~~JA41APS2 Item Description Type = F (Free-form) Product/Process Characteristic Code = 12 (Type and/or Process) Description = JA41APS2 02/23/2015 V/R FCA US

42 FCA US Pay As Built Inventory Advice Example 2: Pay As Built Paint (continued) MEA~PD~QUR~88.888~SM Measurement Reference ID Code = PD (Physical Dimensions) Measurement Qualifier = QUR (Reportable Quantity) Measurement Value = Unit or Basis for Measurement Code = SM (Square Meter) SLN~2~~I~1~EA~~~~BP~ AA Assigned Identification = 2 Product/Service ID = AA PID~F~12~~~JA41APS2 MEA~PD~QUR~77.777~SM Item Description Type = F (Free-form) Product/Process Characteristic Code = 12 (Type and/or Process) Description = JA41APS2 Measurement Reference ID Code = PD (Physical Dimensions) Measurement Qualifier = QUR (Reportable Quantity) Measurement Value = Unit or Basis for Measurement Code = SM (Square Meter) LIN~4~VV~6J104774~JS~ Assigned Identification = 4 = VV (Motor Vehicle ID Number) Product/Service ID = 6J = JS (Job Sequence Number) Product/Service ID = SLN~1~~I~1~EA~~~~BP~ AA Assigned Identification = 1 Product/Service ID = AA PID~F~12~~~JA41APS2 Item Description Type = F (Free-form) Product/Process Characteristic Code = 12 (Type and/or Process) Description = JA41APS2 02/23/2015 V/R FCA US

43 FCA US Pay As Built Inventory Advice Example 2: Pay As Built Paint (continued) MEA~PD~QUR~88.888~SM Measurement Reference ID Code = PD (Physical Dimensions) Measurement Qualifier = QUR (Reportable Quantity) Measurement Value = Unit or Basis for Measurement Code = SM (Square Meter) SLN~2~~I~1~EA~~~~BP~ AA Assigned Identification = 2 Product/Service ID = AA PID~F~12~~~JA41APS2 MEA~PD~QUR~77.777~SM Item Description Type = F (Free-form) Product/Process Characteristic Code = 12 (Type and/or Process) Description = JA41APS2 Measurement Reference ID Code = PD (Physical Dimensions) Measurement Qualifier = QUR (Reportable Quantity) Measurement Value = Unit or Basis for Measurement Code = SM (Square Meter) LIN~5~VV~6J105477~JS~ Assigned Identification = 5 = VV (Motor Vehicle ID Number) Product/Service ID = 6J = JS (Job Sequence Number) Product/Service ID = SLN~1~~I~1~EA~~~~BP~ AA Assigned Identification = 1 Product/Service ID = AA PID~F~12~~~JA41APS2 Item Description Type = F (Free-form) Product/Process Characteristic Code = 12 (Type and/or Process) Description = JA41APS2 02/23/2015 V/R FCA US

44 FCA US Pay As Built Inventory Advice Example 2: Pay As Built Paint (continued) MEA~PD~QUR~88.888~SM Measurement Reference ID Code = PD (Physical Dimensions) Measurement Qualifier = QUR (Reportable Quantity) Measurement Value = Unit or Basis for Measurement Code = SM (Square Meter) SLN~2~~I~1~EA~~~~BP~ AA Assigned Identification = 2 Product/Service ID = AA PID~F~12~~~JA41APS2 MEA~PD~QUR~77.777~SM Item Description Type = F (Free-form) Product/Process Characteristic Code = 12 (Type and/or Process) Description = JA41APS2 Measurement Reference ID Code = PD (Physical Dimensions) Measurement Qualifier = QUR (Reportable Quantity) Measurement Value = Unit or Basis for Measurement Code = SM (Square Meter) LIN~6~VV~6J105478~JS~ Assigned Identification = 6 = VV (Motor Vehicle ID Number) Product/Service ID = 6J = JS (Job Sequence Number) Product/Service ID = SLN~1~~I~1~EA~~~~BP~ AA Assigned Identification = 1 Product/Service ID = AA PID~F~12~~~JA41APS2 Item Description Type = F (Free-form) Product/Process Characteristic Code = 12 (Type and/or Process) Description = JA41APS2 02/23/2015 V/R FCA US

45 FCA US Pay As Built Inventory Advice Example 2: Pay As Built Paint (continued) MEA~PD~QUR~88.888~SM Measurement Reference ID Code = PD (Physical Dimensions) Measurement Qualifier = QUR (Reportable Quantity) Measurement Value = Unit or Basis for Measurement Code = SM (Square Meter) SLN~2~~I~1~EA~~~~BP~ AA Assigned Identification = 2 Product/Service ID = AA PID~F~12~~~JA41APS2 MEA~PD~QUR~77.777~SM Item Description Type = F (Free-form) Product/Process Characteristic Code = 12 (Type and/or Process) Description = JA41APS2 Measurement Reference ID Code = PD (Physical Dimensions) Measurement Qualifier = QUR (Reportable Quantity) Measurement Value = Unit or Basis for Measurement Code = SM (Square Meter) LIN~7~VV~6J105481~JS~ Assigned Identification = 6 = VV (Motor Vehicle ID Number) Product/Service ID = 6J = JS (Job Sequence Number) Product/Service ID = SLN~1~~I~1~EA~~~~BP~ AA Assigned Identification = 1 Product/Service ID = AA PID~F~12~~~JA41APS2 Item Description Type = F (Free-form) Product/Process Characteristic Code = 12 (Type and/or Process) Description = JA41APS2 02/23/2015 V/R FCA US

46 FCA US Pay As Built Inventory Advice Example 2: Pay As Built Paint (continued) MEA~PD~QUR~88.888~SM Measurement Reference ID Code = PD (Physical Dimensions) Measurement Qualifier = QUR (Reportable Quantity) Measurement Value = Unit or Basis for Measurement Code = SM (Square Meter) SLN~2~~I~1~EA~~~~BP~ AA Assigned Identification = 2 Product/Service ID = AA PID~F~12~~~JA41APS2 MEA~PD~QUR~77.777~SM Item Description Type = F (Free-form) Product/Process Characteristic Code = 12 (Type and/or Process) Description = JA41APS2 Measurement Reference ID Code = PD (Physical Dimensions) Measurement Qualifier = QUR (Reportable Quantity) Measurement Value = Unit or Basis for Measurement Code = SM (Square Meter) LIN~8~VV~6J105485~JS~ Assigned Identification = 8 = VV (Motor Vehicle ID Number) Product/Service ID = 6J = JS (Job Sequence Number) Product/Service ID = SLN~1~~I~1~EA~~~~BP~ AA Assigned Identification = 1 Product/Service ID = AA PID~F~12~~~JA41APS2 Item Description Type = F (Free-form) Product/Process Characteristic Code = 12 (Type and/or Process) Description = JA41APS2 02/23/2015 V/R FCA US

47 FCA US Pay As Built Inventory Advice Example 2: Pay As Built Paint (continued) MEA~PD~QUR~88.888~SM Measurement Reference ID Code = PD (Physical Dimensions) Measurement Qualifier = QUR (Reportable Quantity) Measurement Value = Unit or Basis for Measurement Code = SM (Square Meter) SLN~2~~I~1~EA~~~~BP~ AA Assigned Identification = 2 Product/Service ID = AA PID~F~12~~~JA41APS2 MEA~PD~QUR~77.777~SM Item Description Type = F (Free-form) Product/Process Characteristic Code = 12 (Type and/or Process) Description = JA41APS2 Measurement Reference ID Code = PD (Physical Dimensions) Measurement Qualifier = QUR (Reportable Quantity) Measurement Value = Unit or Basis for Measurement Code = SM (Square Meter) LIN~9~VV~6J10548~JS~ Assigned Identification = 9 = VV (Motor Vehicle ID Number) Product/Service ID = 6J10548 = JS (Job Sequence Number) Product/Service ID = SLN~1~~I~1~EA~~~~BP~ AA Assigned Identification = 1 Product/Service ID = AA PID~F~12~~~JA41APS2 Item Description Type = F (Free-form) Product/Process Characteristic Code = 12 (Type and/or Process) Description = JA41APS2 02/23/2015 V/R FCA US