GENERAL USE VISE TYPE ALUMINUM SINGLE BOLT ALUMINUM TO ALUMINUM OR ALUMINUM TO COPPER

Transcription

1 GENERAL USE VISE TYPE ALUMINUM SINGLE BOLT ALUMINUM TO ALUMINUM OR ALUMINUM TO COPPER ALUMINUM GA9000 Recommended for aluminum or aluminum to copper distribution, service or tap connections. Add Suffix G to catalog number for neoprene grommets. Grommet holds spacer bar in place during installation. Sealant is recommended on all connectors. Optional snap-on cover Optional - Class AA temperature rated per ANSI C119.4 Body Aluminum Alloy Spacer Aluminum Hardware Aluminum Alloy (std.) or Stainless Steel ( SS suffix) Options: Snap-On Cover (See Column) (B-Suffix) Torque-Head Bolts (Add O Suffix) Grommets G suffix L Inhibitor applied (std.) AA - Class AA rated Ex: GA900GAASSB or GA9041GLOB3 G Grommet Suffix Optional grommet aids in positioning spacer bar. See note below. 1 SINGLE BOLT ALUMINUM CONNECTORS CONDUCTOR RANGE RUN TAP MAX. MIN. MAX. MIN. AL. OR CU. ACSR STANDARD CLASS AA ACSR AL. ACSR AL. ACSR AL. OR CU. GA9003L** GA9003AA 4 Sol. 6 8 Sol. 4 Sol. 6 8 Sol. GA900L** GA900AA 1 Str. 6 6 Sol. 1 Str. 6 1 Sol. GA900LSS** GA900AASS 1/0 /0 Str. 6 6 Sol. 1/0 /0 Str. 6 6 Sol. GA9040L** GA9040AA 4/0 4/0 Str. 1 Str. 4/0 4/0 Str. 1 Str. GA9041L** GA9041AA 4/0 4/0 Str. 1 Str. /0 /0 Str. 6 6 Sol. GA9405L GA9405AA 3/0 3/0 Str. 4 4 Str. 4 Str. 1 Sol. GA9400L GA9400AA 336, ,500 3/0 4/0 Str. 336, ,500 3/0 4/0 Str. GA9401L GA9401AA 336, ,500 3/0 4/0 Str. 4/0 66, Sol. GA984L** GA984AA 666, ,000 4/0 66,800 /0 /0 6 6 Sol. GA9843L** GA9843AA 666, ,000 4/0 66,800 4/0 4/0 1 Str. CONNECTORS FOR SPECIAL APPLICATIONS A INCHES 7/8 (.7) 1-1/8 (8.63) 1-1/4 (31.81) 1- (38.18) 1- (38.18) 1- (38.18) -1/16 (5.50) -1/16 (5.50) (50.90) (50.90) 1-1/8 GA9404L GA9404AA 4/0 4/0 4 4 Str. 10 Sol. 1 Sol. (8.63) 3 GA9844L 666, , , , , ,500 4/0 66,800 (76.35) 3 GA9954L GA9954AA 795,000* 954, , ,400 1/0 (76.35) B INCH- ES 1-1/4 (31.81) 1 7/8 (47.7) 1 -/8 (47.7) - (69.99) 3- (85.89) 1-7/8 (47.7) 3- (89.08) 4 (101.80) 3- (9.6) 3- (9.6) 1-7/8 (47.7) 3 (76.35) 3 (76.35) C INCH- ES 1- (44.54) -1/8 (54.08) - (60.44) 3-1/8 (79.53) 3-1/8 (79.53) - (63.63) 3- (89.08) 3- (89.08) 3- (95.44) 3- (95.44) -1/8 (54.08) 4- (10.89) 4 (10.89) AP- PROX. WT. EACH LBS. (KG) *795 ACSR 6/7 ** RUS Listed Feature: G Soft flexible grommets hold the spacer bar in position for easy installation of the run and tap. The grommets do not interfere with the smooth operation of the connector..17 (.08).3 (.10).34 (.15).55 (.5).58 (.6).44 (.0).78 (.35).84 (.38).80 (.36).88 (.40).39 (.18) 1.4 (.56) 1.4 (.56) INSULATED SNAP-ON COVER GA9000B** GA9000B** GA9000B** GA9000B3** GA9000B3** GA9000B** GA9000B3** GA9000B3** GA9000B3** GA9000B3** GA9000B** GA9000B5** GA9000B5**

2 ALUMINUM GA9000 GENERAL USE VISE TYPE, TWO- BOLT EXTENDED RANGE ALUMINUM ALUMINUM TO ALUMINUM OR ALUMINUM TO COPPER Heavy duty construction for aluminum to aluminum or aluminum to copper conductor connections. Sealant is recommended for all connections. Body Aluminum Alloy Spacer Aluminum Hardware Aluminum Alloy (std.) or Stainless steel ( SS Suffix) A Dimension depends on bolt extension/conductor size opening. G Grommet Suffix Optional grommet aids in positioning spacer bar. See note below. GA9000Bx Series Snap-On Cover RUN CONDUCTOR RANGE INCHES AP- PROX. WT. EACH LBS. (KG) * For insulated Snap-On Cover order Catalog No. GA9000B4. 6/7 ACSR Feature: G Soft flexible grommets hold the spacer bar in position for easy installation of the run and tap. The grommets do not interfere with the smooth operation of the connector. TAP MAX. MIN. MAX. MIN. STAN- DARD CLASS AA ACSR AL. ACSR AL. ACSR AL. OR CU. ACSR AL. OR CU. GA950GL* GA950GAA* 477, ,000 4/0 4/0 477, ,000 4/0 4/0 GA951GL* GA951GAA* 477, ,000 4/0 50,000 4/0 66, Str. GA980GL GA980GAA 795, , , , , , , ,000 GA981GL GA981GAA 795, , , , , ,000 3/0 4/0 GA9100GL GA9100GAA 1,7,000 1,500, , ,000 1,7,000 1,500, , ,000 GA9101GL GA9101GAA 1,7,000 1,500, , , , , , ,400 (NOMI- NAL) A 4 (101.80) 4 (101.80) 5- (139.98) 5- (139.98) 5- (146.34) 5- (146.34) B 4-1/4 (108.16) 4-1/4 (108.16) 4- (114.53) 4- (114.53) 6-1/4 (159.06) 6-1/4 (159.06) C - (63.63) - (63.63) - (69.99) - (69.99) -7/8 (73.17) -7/8 (73.17) 1.44 (.65) 1.5 (.69).40 (1.09).30 (1.04) 4.50 (.04) 4.60 (.09)

3 GENERAL USE VISE TYPE COPPER TO COPPER For copper connections-splice, Loop deadend or service entrance tap or grounding connections One piece design for easier, faster installation Bolt head design for use with standard ratchet wrench Vise design achieves high connector pressure with low wrench force GC5000 SERIES Options: Body Copper Alloy Hardware Stainless Steel or Silicon Bronze Alloy Suffix P Tin-plated 3 TOP VIEW SIDE VIEW CONDUCTOR RANGE MAX. CONDUCTORS MIN. CONDUCTORS DIA. RANGE ( COND. COMBO.) DIA. EA. COND. MIN. - MAX. A B C WT. EA. LB (KG) BOLT HEAD (HEX.) GC5008SH* #8 STR. #11 SOL (.3-3.7) 7/8 (.7) (15.91).06 (.03) GC5006** GC5006SH* #6 SOL. #10 SOL ( ) 1 (5.45) (15.91) (19.09).09 (.04) (10) GC5004** #4 STR. #8 SOL ( ) 1-1/4 (31.81) 7/8 (.7).16 (.07) GC500** # SOL. #6 SOL. GC500S** # STR. #5 SOL. GC500** 1/0 STR. #4 SOL ( ) ( ) ( ) 1- (34.99) 1- (41.36) 1-7/8 (47.7) (19.09) 1 (5.45) 1-1/8.18 (.08) (8.63).8 9/16 (14) GC500S** /0 STR. #3 SOL ( ) (50.90) 7/8 (.7) 1-1/4 (31.81) (.13) GC5040** 4/0 STR. #1 SOL ( ) -1/8 (54.08) 1 (5.45) 1- (34.99).48 (.) * SH suffix indicates a slotted hex-head bolt. **RUS Listed For tin-plated bronze connectors, add suffix P to catalog number (not available on GC5006S, GC5006SH and GC5008SH) Note: All connectors will accept one or two of the conductors listed and any combination in between.

4 GC SERIES GC100/ 00/5000 GENERAL USE GROUNDING AND BONDING VISE TYPE For copper to copper connections or conductor to conductor and conductor/cable sheath to bar. Copper Alloy Stainless Steel or Silicon Bronze slotted head hex GC5000 Series 4 GC71* RANGE INCHES CONDUCTOR COMBINATIONS CABLE BOLT SHEATH A B C RUN TAP BONDING DIA. WRENCH Sol 6 Str to 3 pair GC5006SH* to 3 pair GC5006 ** to 3 pair GC5004 ** (5.45) 1 (5.45) 1 (5.45) 1 to 3 pair 1-1/4 1 5 pair GC500** 6- * Slotted Head Bolt Complies with UL-467 and ETL listed **RUS Listed (31.81) 1- (35.00) (15.90) (15.90) (15.90) (15.90) (19.08) (19.08) (19.08) (19.08) 7/8 (.6) 1 (5.45) 1/4 (6.36) 1/4 (6.36) 1/4 (6.36) 5/16 (7.95) 5/16 (7.95) (10) (10) (10) 9/16 (14) 9/16 (14) WT LB (KG).08 (.04).09 (.04).09 (.04).16 (.07).18 (.08) For Figure 8 or IM Cable Insulation Piercing The piercing teeth of the connector puncture the messenger insulation during tightening to form a positive ground without skinning. GC167 CATA- LOG MESSENGER DIAMETER GROUND TAP A INCHES B C DIA. BOLT WRENCH WT LB (KG) GC167 GC167P ( ) ( ) 1- (41.36) 1-1/4 (31.81) 1 (5.45) 5/16 (7.95) 9/16 (14).1 (.10) *Suffix P Tin-Plated Bronze

5 GENERAL USE GROUNDING AND BONDING VISE TYPE For Bonding Ribbon, Braid and Tape Bonding ribbon or braid to bonding ribbon, braid, conductor, or bus and tape to messenger. GC164 GC164P Plated Bronze BONDING RIBBON OR BRAID CONNECT Ribbon or Braid TO Ribbon, Braid, #6 or Bus A 1 (5.45) INCHES B (15.90) C 1 (5.45) DIA. 1/4 (6.36) BOLT WRENCH (10) WT LB (KG).1 (.05) GC164 For Ground Rods ROD DIA. INCHES RANGE CONDUC- TOR A INCHES B C DIA. BOLT WRENCH WT LB (KG) 5 GC68 1/4 ( ) 6-1/0 1 (5.45) 1- (35.00) (9.54) 9/16 (14).43 (.19) * Torque head bolts available for tamperproof, removeable connection. Complies with UL-467 and ETL listed GC68 For Lashing Wire Connect small diameter lashing wires to messengers. MESSENGER DIAMETER RANGE LASHING WIRE INCHES CONNECT TO A B C DIA. BOLT WRENCH WT LB (KG) GC166 GC166P ( ) All Sizes 1- (38.18) 7/8 (.6) 1 (5.45) 1/4 (6.36) (10).16 (.07) Suffix P- Plated Bronze For Guy Strand Aluminum bodied connectors for connecting galvanized or aluminum clad strand to copper conductors. Vise Type Parallel Connector. GA9003L** GA900L** LC5AXB* ** LC5AXB ** STRAND RANGE (IN.) 1/4 (6.36) 1/4 ( ) 1/4 ( ) CONDUCTOR RANGE INCHES A 7/8 (.6) 1-1/8 (8.63) PARALLEL GROOVE TYPE /0 8 - (60.44) B 1-1/4 (31.81) 1-7/8 (47.7) 1- (41.36) C 1- (44.54) -1/8 (54.08) 1- (35.00) WT LB (KG).17 (.08).3 (.10).0 (.09) GC166 GA9000 Series * Inhibitor Protected and Individually Packaged Standard Bimetallic Liner on Tap Side Copper **RUS Listed LC50 Series

6 KUL KUL Clamp - Tin-Plated Bronze Clamp with Interlocking Jaws Tin plated for corrosion protection High strength copper alloy Half-inch hex head silicon bronze bolt Application: 1/4-7/16 strand #8 - #/0 copper wire 6 KUL14716BG (Top) KUL14716 (Bottom) *GC09 is furnished with bronze jam nut on stud. +Add Suffix P for Tin-plated Version (Minimum purchase quantities may apply) **RUS Listed DESCRIPTION PACKAGING KUL % tin plated Standard Packaging: 100/box. No Minimum Order KUL14716BG Tin plated with one bare bronze groove Standard Packaging: 100/box. No Minimum Order Provides a permanent vibration proof connection. The large flat surface of the male casting provides secure mounting, while the V shaped conductor groove assures alignment of grounding connector.

7 GROUNDING CONNECTOR WIRE TO ROD OR PIPE GC/C03 Bronze alloy ground clamp for grounding copper cable parallel to a ground rod or tube. Suitable for Direct Burial GC Casting Bronze Alloy Hardware Stainless Steel C03 Casting Galvanized Steel Hardware Zinc Plated LISTED 61L 7 COPPER CABLE RANGE ROD DIA. GC4 #8 Sol. #4 Str. GC5G5 #10 Sol. # Str. C Heavy Duty C Heavy Duty #8 Sol. /0 Str. #8 Sol. /0 Str. INCHES L H W J 1-7/8 13/16 (15.88) (47.6) (0.64) (9.5) 1-19/3 9/3 (15.88) (40.39) (3.11) (9.5) 1-1/8-7/8 1-15/3 (8.6) (73.0) (37.3) (1.7) 1-1/8-7/8 1-15/3 (8.6) (73.0) (37.3) (1.7).09 (.04).11 (.05).34 (.15).30 (.14)

8 GC00 SERIES GENERAL USE VISE TYPE GROUND CLAMP LIGHTNING ARRESTER GROUND For grounding applications Provided with standard -13 threaded studs and flat surfaces for easy one wrench installation Note: Body Copper Alloy Hardware Stainless Steel Lightning Arrester type installations, see DC-11. GC07 FIGURE 1 TYPE 8 GC07-GC09 GC07+** (Fig. 1) GC08+ (Fig. 1) GC09*+ (Fig. 1) CONDUCTOR RANGE 6 Sol. To 1/0 Str. 4 Str. To /0 Str. 3 Sol. To 4/0 Str. GROUNDING CONNECTOR INCHES A B C D E 1-1/4 (31.81) 1-5/16 (33.40) 1- (38.18) (19.09) 13/16 (0.68) 1-1/8 (8.63) 1-7/8 (47.7) 1-7/8 (47.7) 1- (44.54) (1.73) (1.73) (1.73) 5/16 (7.95) 5/16 (7.95) 5/16 (7.95) WT LB (KG).1 (.10).9 (.13).40 (.18) *GC09 is furnished with bronze jam nut on stud. +Add Suffix P for Tin-plated Version (Minimum purchase quantities may apply) **RUS Listed The large flat surface of the male casting provides secure mounting, while the V shaped conductor groove assures alignment of grounding connector.

9 GROUND CLAMP CONDUCTOR TO TRANSFORMER TANK TYPE GTCL: 90 GROUND CONDUCTOR MOUNT Bronze alloy ground clamp for tapping copper conductor to transformer tank Tapered threads at base of stud ensure positive locking and electrical contact without lockwashers GTCL Bronze Alloy Bronze Alloy Silicon Bronze Alloy or Stainless Steel Add suffix TP for tin-plated version. COPPER CABLE RANGE INCHES L H W J WT. EACH LBS. (KG) 9 GTCL3A* #10 Sol. #1 Str. 7/8 (.) 1- (38.1) 1- (34.9) (9.5).0 (.09) GTCL34A* #8 Sol. /0 Str. 1 (5.4) 1-7/8 (47.6) 1-17/3 (38.89) (9.5).5 (.11) *RUS Listed GROUND CLAMP CONDUCTOR TO TRANSFORMER TANK TYPE GTCS: 90 OR STRAIGHT GROUND MOUNT Bronze alloy ground clamp for tapping copper conductor to transformer tank Tapered thread at base of stud ensures positive locking and electrical contact without lockwashers. Hex wrenching surface above tapered thread provides easy installation. GTCS Casting Bronze Alloy Eyebolt Bronze Alloy Hardware Silicon Bronze Alloy or Stainless Steel Add suffix TP for tin-plated version. COPPER CABLE RANGE INCHES L H W J WT. EACH LBS. (KG) GTCS1 #10 Sol. #1 Str. 1-1/8 (8.58) 1- (41.8) 1-7/8 (47.6) (9.5).9 (.13) GTCS34A #8 Sol. /0 Str. 1-1/4 (31.75) 1-7/8 (47.6) -1/4 (57.7) (9.5).34 (.15) GTCS41 #6 Sol. 50 MCM 1- (41.8) - (60.3) - (63.5) (1.7).45 (.0)

10 LAT, GC07LA LIGHTNING ARRESTER GROUNDING TERMINALS TYPE LAT AND GC07LA DISTRIBUTION ARRESTER TERMINALS (See also Page DC7) This versatile bronze connector can be mounted to a drilled plate, structure or bar using a -16 cap screw. It can also be screwed onto a -16 bushing stud and secured in place with the included jam nut. The eyebolt can be positioned within the body to allow either vertical or horizontal conductor entrances. Casting Bronze Alloy Eyebolt Bronze Alloy Hardware Silicon Bronze Alloy Brass jam nut 10 STUD SIZE CONDUCTOR RANGE O.D. LENGTH INCHES WT. EACH LAT Sol. - /0 Str O.D (43) 40 (18) Add suffix TP for tin-plated connector This connector is intended primarily for bottom termination of lightning arresters to ground. May also be employed on top connections. Note: Casting Bronze Alloy Eyebolt Bronze Alloy Hardware Stainless Steel See pages DC-9 DC-10 for application details. STUD SIZE GC07LA - 16 Add suffix P for tin-plated connector CONDUCTOR RANGE O.D. #6 Sol. - 1/0 Str ( ) mm WT. 100 (9.9)

11 TYPE APD ARC PROTECTION FOR COVERED PRIMARY CONDUCTOR ALUMINUM APD The APD helps prevent lightning induced burndowns of covered overhead aluminum primary conductors and allows users to comply with Article 76 of the National Electric Safety Code, 1981 Edition. The device protects covered conductor by shielding it from the usual concentration of arc energy generated during a lightning strike. Without the device, such arcs can puncture the conductor cover and ground to the neutral leaving a short section of conductor strands that are either completely destroyed or badly eroded and seriously weakened. (Conventional overcurrent protection equipment does not operate fast enough to protect these lightning exposed conductors.) APD lightning protectors add mass of the correct shape to the conductor in the area where it absorbs the terminus of arc energy. It is thus a partially sacrificed component during each strike yet retains enough of its original mass and configuration to accommodate several strikes without losing effectiveness or allowing the adjacent line insulator to be splattered with damaging metallic particles. APD lightning protectors are both laboratory tested and field proven with the same successful results. They are offered in two models. The high energy APD-80 model is designed to withstand multiple operations at 1,000 amperes fault current for ten (10) cycles without conductor damage. A low-energy APD-57 model is available for applications where fuses limit the destructive energy by clearing the fault more rapidly than circuit breakers. 11 Note: Castings Aluminum Alloy Hardware APD57 Galvanized Steel APD80 Stainless Steel A radial circuit requires an APD protector on the load side of the insulator only, while other circuit configurations, such as loops, require that they be installed on both sides of the line insulator. In both situations, they must be installed on all conductor phases and positioned outside the end of a tie wire. The covering must be stripped away over this distance including the area within the confines of a tie wire. Since an arc from one phase to the neutral will often expand to fault all three phases, the device must be installed on all three phases. (WITH INHIBITOR) MAX. O.D. OF CABLE JACKET INCHES CONDUCTOR RANGE O.D. IN INCHES DIMENSION B INCHES WT. 100 (1) APD57XB (Fused circuits) #1-4/0 STR. AAC #-4/0 ACSR (7) 4 (11) APD80XB 1.00 / Str. AAC 1/0-477 (18/1) ACSR (48) 66 (30) (1) This item is suitable for use on fused circuits only. Specifically, it should not be installed on lines protected by circuit breakers because of their relatively slow interrupting rate.

12 BXS TINNED ALUMINUM OR TRANSFORMER SPADE TERMINALS TYPE AXS & BXS ALUMINUM AXS Secured by jam nut to bushing stud. Recommended when copper terminals are connected (Use AXS style for aluminum terminals.) Terminal lug mounting holes are 9/16 diameter with 1- NEMA spacing. Jam nuts are usually supplied by the transformer manufacturer and are not furnished unless specified. 1 Notes: - Bronze Alloy (tin-plated) - Aluminum Alloy (tin-plated) (1) Terminals for 1-1/4 1 bushing studs can be furnished with a 1/4 0 tapped hole in the outer end to attach an insulated suspension support rod for mechanical support. Add suffix -MS for this option. () Add suffix JN to specify a factory applied brass jam nut. X FORMER STUD SIZE GENERAL DESCRIPTION & FIELD APPLICATION BXS58N -11 Two Holes in Line NEMA Spaced INCHES LENGTH WIDTH HEIGHT WT (130) 1.37 (35) 0.31 (8) 70 (3) BXS10N 1-14 For Use With One Hole Lugs 5.06 (19) 1.93 (49) 0.34 (9) 14 (64) BXS584N (16) 1.37 (35) 0.31 (8) 10 (54) BXS104N AXS584NTP Four Holes in Line NEMA Spaced For Use With One Hole Lugs 8.56 (18) 8.50 (16) 1.93 (49) 1.37 (35) 0.34 (9) 0.31 (8) 15 (98) 36 (16) AXS104NTP (18).00 (50) 0.34 (9) 65 (9) BXS58BN (136) 3.50 (89) 0.5 (6) 13 (60) BXS10BN 1-14 Two Sets of NEMA Spaced Holes Mounts Up to 4 Two-Holed Lugs 5.87 (149) 3.50 (89) 0.37 (9) 60 (118) AXS58BNTP (136) 3.50 (89) 0.5 (6) 39 (18) BXS583BN (168) 3.50 (89) 0.37 (9) 56 (116) BXS103BN 1-14 Three Sets of NEMA Spaced Holes Mounts Up to 6 Two-Holed Lugs 7.00 (178) 3.50 (89) 0.37 (9) 315 (143) AXS103BNTP (178) 3.50 (89) 0.37 (9) 94 (43) BXS584BN -11 Four Sets of NEMA Spaced Holes 8.37 (13) 3.50 (89) 0.37 (9) 330 (150) BXS104BN 1-14 Mounts Up to 8 Two-Holed Lugs 8.75 () 3.50 (89) 0.37 (9) 36 (164) Three Sets of NEMA Spaced Holes BXS13BN 1-1/4-1 Mounts Up to 6 Two-Holed Lugs Or 7.1 (181) 3.50 (89) 0.37 (9) 345 (156) Up to 1 Two-Holed Lugs If Stacked Four Sets of NEMA Spaced Holes BXS14BN 1-1/4-1 Mounts Up to 8 Two-Holed Lugs Or 9.1 (3) 3.50 (89) 0.37 (9) 445 (0) Up to 16 Two-Holed Lugs If Stacked Six Sets of NEMA Spaced Holes BXS16BN 1-1/4-1 Mounts Up to 1 Two-Holed Lugs Or (356) 4.00 (10) 0.50 (13) 970 (440) Up to 4 Two-Holed Lugs If Stacked Eight Sets of NEMA Spaced Holes BXS18BN 1-1/4-1 Mounts Up to 16 Two-Holed Lugs Or (445) 4.00 (10) 0.50 (13) 1300 (590) Up to 3 Two-Holed Lugs If Stacked

13 OVERHEAD TRANSFORMER PAD ADAPTER CONNECTORS TIN-PLATED FLAG ADAPTERS USE W/EYEBOLT (GTCL/GTCS) TYPE SECONDARY BUSHING TERMINALS VF Bronze terminal adapter for connecting a flat pad to NEMA secondary transformer terminal Optional for use with Type GTCL or GTCS terminals. Bronze Alloy (tin-plated) 13 NEMA DRILLED PAD & ROD DESCRIPTION TRANSFORMER SIZE RATING (SINGLE PHASE) INCHES L DIA. WT. 100 VF440 4 Hole 4 x 4 x 1/4 Pad (75) 5-15 KVA VF640 6 Hole 3 x 5-1/4 x 1/4 Pad (57) (13) 180 (8) VF Hole 4 x 4 x 1/4 Pad (98) 5-50 KVA VF Hole 3 x 5-1/4 x 1/4 Pad (70) (0) 31 (105) VF Hole 4 x 4 x 1/4 Pad (111) 75 KVA VF Hole 3 x 5-1/4 x 1/4 Pad (10) (1) 60 (118) VF Hole 4 x 4 x 1/4 Pad (14) 100 KVA VF Hole 3 x 5-1/4 x 1/4 Pad (10) (5) 37 (148)

14 ALUMINUM UTSB SET SCREW BAR TRANSFORMER CONNECTORS TOGGLE LATCH For connecting secondary underground applications to transformer studs. Innovative Toggle Latch mechanism provides unmatched ease of installation, along with superior electrical performance. One part accepts both -11 and 1-14 threads. Reduced inventory; one part accepts both -11 and 1-14 thread transformer studs. Oxide Inhibiting Compound provided as standard in stud and tap holes. 5/16 allen set screws provide constant pressure on conductors. Testing meets or exceeds ANSI C119.6 Class A tests. Redundant ground ports provided for use on neutral phase connections. Toggle nut is across flats, fits standard GP3 Speed Wrench. 14 Note: Body Aluminum Alloy Hardware High Strength Steel Boot/Cover Poly-vinyl Chloride (PVC) Not suitable for submersible installations. TRANS- FORMER STUD SIZES MAIN PORTS CONDUCTOR RANGE STREET LIGHT PORT REDUNDANT GROUND MAIN PORTS STREET LIGHT PORTS GROUND PORTS PACKAGING PER BOX UNITS WEIGHT (LBS) UTSB8500L -11 & 1-14 #6 SOL MCM #1 SOL - 1/0 SOL #1 SOL - # SOL NOTE: Add suffix C for clear PVC cover included in package UTSB8500CL. Factory applied inhibitor (HTJC) included standard. Cover Part Number: CTL8500

15 SET SCREW BAR TRANSFORMER CONNECTORS TOGGLE LATCH ALUMINUM UTZB For connecting secondary underground applications to transformer studs. Innovative Toggle Latch mechanism provides unmatched ease of installation, along with superior electrical performance. Reduced inventory; one part accepts both -11 and 1-14 thread transformer studs. Oxide Inhibiting Compound provided as part of standard in stud and tap holes. Allen head set screws (fits 5/16 allen wrench) provide constant pressure on conductors. Meets or exceeds ANSI C119.6 Class A tests. Toggle nut is across flats, fits standard GP3 Speed Wrench. Note: Body Aluminum Alloy Set Screws Aluminum Alloy Hardware High Strength Steel Boot/Cover Poly-vinyl Chloride (PVC) Not suitable for submersible installations. 15 Units are expressed in inches (millimeters) TRANSFORMER STUD SIZES MAIN PORTS CONDUCTOR RANGE STREET LIGHT PORT MAIN PORTS STREET LIGHT PORTS PACKAGING PER BOX UNITS WEIGHT (LBS) UTZB6500L -11 & 1-14 #6 SOL MCM #1 SOL - 1/0 SOL NOTE: Add suffix C for kit with stud bar & clear PVC cover (UTZB6500CL). Factory applied inhibitor (HTJC) included standard. Cover Part Number: CZTL6500

16 GC8000 GENERAL USE VISE TYPE PARALLEL GROOVE For copper to copper conductor - splice, loop deadend or service entrance taps. Castings Copper Alloy Hardware Stainless Steel Galvanized Steel Silicon Bronze 16 *CONDUCTOR RANGE (AWG) MAIN MIN. SOL. STR. SOL. INCHES A B C BOLT SIZE BOLT HEAD (HEX) WT. GC800*GL (34.99) 1 1/4 (31.81) 7/8 (.7) 5/16 (7.95) 9/16 (14.3).16 (.07) GC8010*GL 1/ (38.18) 1 (34.99) 1 (5.45) 5/16 (7.95) 9/16 (14.3).4 (.11) GC800*GL 3/0 /0 8 1 (44.54) 1 (34.99) 1 1/8 (8.63) 5/16 (7.95) 9/16 (14.3).33 (.15) GC8040*GL 4/0 4/0 6 (60.44) 1 (38.18) 1 (38.18) (9.54) 9/16 (14.3).6 (.8) For Tin-plated Connectors replace * with P in Catalog Number. **RUS Listed *Conductor Range Each size will close on two of the maximum size conductors, one minimum and one maximum size, or combinations in between. Inhibitor Protected and Bagged All connectors come with factory installed HTJC inhibitor and individually packaged.

17 GENERAL USE PARALLEL GROOVE ALUMINUM MULTIPLE U-BOLTS WITH COPPER LINER ALUMINUM LCC For aluminum to copper conductor connections only. Sealant (XB) is recommended on all connections. Body Top member 356-T6 Aluminum Alloy Spacer Aluminum Alloy with a metallurgically bonded Copper liner Bottom Member High Strength Bronze Hardware Galvanized Steel FIGURE 1 FIGURE FIGURE NUM- BER LCC111XB 1 CONDUCTOR RANGE INCHES MAIN TAP L W H #6 Sol. /0 Str. AAC #8 Sol. /0 (6/1) ACSR #8 Sol. /0 Str. CU -5/16 (58.74) 3- (88.90).77 (.35) 17 LCC1XB 1 1/0 Str. 400 MCM AAC 1/0 (6/1) (18/1)ACSR #4 Sol. 4/0 Str. CU - (63.50) -11/16 (68.6) 4 (101.60) 1.11 (.50) LCCXB 1/0 Str. 400 MCM AAC 1/0 (6/1) (18/1) ACSR #4 Sol. 4/0 Str. CU 3-7/8 (98.43) - (69.85) 4 (101.60) 1.68 (.76) LCC31XB 1 1/0 Str. 400 MCM AAC 1/0 (6/1) (18/1) ACSR 1/0 Str. 500 MCM CU - (63.50) -11/16 (68.6) 4 (101.60) 1.4 (.56) LCC4XB 1/0 Str. 400 MCM AAC 1/0 (6/1) (18/1) ACSR MCM CU 4-1/8 (104.78) -11/16 (68.6) 4-1/4 (107.95).10 (.95) LCC33XB MCM AAC MCM ACSR 1/0 Str. 400 MCM CU 4- (117.48) 3-1/16 (77.79) 4- (117.48).88 (1.31) GENERAL USE PARALLEL GROOVE ALUMINUM THREE CENTER BOLTS WITH COPPER LINER ALUMINUM LC600 For aluminum to copper conductor connections only. Sealant (XB suffix) is recommended on all connections. Body 356-T6 Aluminum Alloy Hardware Hot Dip Galvanized Steel Tap Liner Copper, Metallurgically Bonded LC677XB CONDUCTOR RANGE INCHES 1/0 (19) MCM AAC 1/0 300 MCM ACSR 1/0 (7) 50 Str. CU 4- (111.13) -5/16 (58.74) - (63.5) (1.7) 1.35 (.61)

18 ALUMINUM LC50 & LC80 GENERAL USE PARALLEL GROOVE ALUMINUM SINGLE CENTER BOLT For aluminum to aluminum and aluminum to copper conductor splice/ tap connections. Sealant (XB) is recommended on all connections. Body Aluminum Alloy Hardware Galvanized Steel 18 FIGURE LC51AXB** 1 LC51CXB** 1 LC5AXB** 1 LC5CXB** 1 LC53AXB** LC83AXB** **RUS Listed ALUMINUM LC500 & LC800 FIGURE CONDUCTOR RANGE Notes: 1) For connectors without sealant, delete suffix XB. ) Add suffix GP for a tin-plated connector. 3) Plastic Cover Available. (See Type PTC Cover) INCHES #8 Sol. 1/0 Str. AAC #8 1/0 ACSR #8 Sol. 1/0 Str. AAC #8 1/0 ACSR #8 Sol. /0 Str. AAC #8 /0 ACSR #1 Sol. 400 MCM AAC # MCM ACSR #1 Sol. 400 MCM AAC # MCM ACSR MCM AAC MCM ACSR #8 Sol. # Str. AAC #8 # ACSR #8 Sol. # Str. Cu #8 Sol. 1/0 Str. AAC #8 1/0 ACSR #8 Sol. 1/0 Str. Cu #8 Sol. /0 Str. AAC #8 /0 ACSR #8 Sol. /0 Str. Cu #8 Sol. /0 Str. AAC #8 /0 ACSR #8 Sol. /0 Str. Cu #1 Sol. 400 MCM AAC # MCM ACSR #1 Sol. 400 MCM Cu #8 Sol. /0 Str. AAC #8 /0 ACSR #8 Sol. /0 Str. Cu GENERAL USE PARALLEL GROOVE ALUMINUM SINGLE CENTER BOLT WITH COPPER LINER 1-1/8 (8.58) 1-1/4 (31.76) 1- (34.93) 1- (38.1) 1-13/3 (35.7) 1-17/3 (38.89) 1-1/3 (4.07) -11/3 (51.60) -11/3 (59.53) -17/3 (64.9) 1- (38.10) -1/4 (57.15) - (63.50) - (69.85) 5/16 (8.0).14 (.06).19 (.09). (.10).8 (.13).41 (.19).54 (.4) FIGURE LC511AXB** 1 LC5AXB** 1 LC54XB 1 LC811AXB** 1 LC8XB LC833XB** **RUS Listed FIGURE 1 For aluminum to copper conductor connections only. Sealant (XB) is recommended on all connections. CONDUCTOR RANGE Body Aluminum Alloy Hardware Galvanized Steel Tap Liner Copper metallurgically bonded INCHES #6 Sol. 1/0 Str. AAC #8 1/0 ACSR #6 Sol. 1/0 Str. AAC #8 1/0 ACSR #6 Sol. 1/0 Str. AAC #8 1/0 ACSR #1 Sol. 400 MCM AAC # MCM ACSR #1 Sol. 400 MCM AAC # MCM ACSR MCM AAC MCM ACSR FIGURE #8 Sol. # Str. Cu #8 Sol. 1/0 Str. Cu 1/0 Str. 4/0 Str. Cu #8 Sol. 1/0 Str. Cu #8 Sol. /0 Str. Cu #8 Sol. /0 Str. Cu 1-1/8 (8.58) 1- (34.93) 1-3/16 (30.16) 1-1/4 (31.75) -1/4 (57.15) - (63.50) 1-5/16 (33.34) 1-1/3 (4.07) 1-5/3 (45.4) -1/3 (51.59) -7/3 (56.36) -17/3 (64.9) 1- (38.10) -1/4 (57.15) - (63.50) - (69.85) 5/16 (8.0).14 (.06). (.10).4 (.11).9 (.13).46 (.1).54 (.4)

19 GENERAL USE PARALLEL GROOVE ALUMINUM MULTIPLE CENTER BOLTS For aluminum to aluminum and aluminum to copper conductor splice/tap connectors. Sealant (XB) is recommended on all connections. ALUMINUM LC60/GA600 Notes: Body Aluminum Alloy Hardware Galvanized Steel 1) For connectors without sealant, delete suffix XB. ) Add suffix GP for a tin-plated connector. FIGURE 1 FIGURE FIGURE NO. CONDUCTOR RANGE INCHES GA670L 1 LC66AXB 1 LC67AXB 1/0 400 AAC 1/ (18/1) ACSR 1/0 (19) 400 MCM AAC 1/ (18/1) ACSR 1/0 400 AAC 1/ (18/1) ACSR 1/0 (19) 400 MCM AAC 1/ (18/1) ACSR 1/0 Sol. 400 MCM Cu 3-1/4 (8.71) 3- (88.90) 5-1/4 (133.35) -1/4 (57.6) - (60.44) - (66.80) - (69.85) - (69.85) - (63.5).60 (.7) 1.10 (.50) 1.30 (.59) 19 LC68AXB MCM AAC (18/1) 477 (30/7) ACSR MCM AAC (18/1) 477 (30/7) ACSR MCM Cu 5-1/4 (133.35) -13/16 (71.44) - (63.5) 1.90 (.86) GENERAL USE PARALLEL GROOVE ALUMINUM SINGLE U-BOLT ALUMINUM LC70 For aluminum to aluminum and aluminum to copper conductor splice/ tap connections and also aluminum or ACSR loop dead-ends. Sealant (XB) is recommended on all connections, except loop dead-ends. Body Top, spacer & bottom members Aluminum Alloy Hardware Galvanized Steel LC71B** LC7B LC73B LC74B** LC75B LC77B **RUS Listed CONDUCTOR RANGE INCHES #6 Sol. /0 Str. AAC #8 /0 ACSR #6 Sol. /0 Str. AAC #8 /0 ACSR 1/0 Sol. 400 MCM AAC 1/ MCM ACSR 1/0 Sol. 400 MCM AAC 1/ MCM ACSR MCM AAC MCM ACSR MCM AAC (45/7) ACSR #6 Sol. /0 Str. AAC #8 /0 ACSR #6 Sol. /0 Str. AAC #8 /0 ACSR #6 Sol. 1/0 Str. AAC #8 1/0 ACSR 1/0 Sol. 400 MCM AAC # MCM ACSR #6 Sol. 1/0 Str. AAC #8 1/0 ACSR MCM AAC (45/7) ACSR -1/4 (57.15) - (69.85) - (69.85) 3-1/4 (8.55) 3- (88.90) -1/4 (57.15) - (66.68) - (66.68) 3 (76.0) 3- (85.73) 3-1/4 (8.55) 3- (85.73) 4 (101.60) 4 (101.60) 4- (117.48) 5- (136.53) (15.88).43 (.0).77 (.35) 1.1 (.51) 1.1 (.55) 1.43 (.65) 1.97 (.89)

20 ALUMINUM LCU10 GENERAL USE PARALLEL GROOVE ALUMINUM TWO U-BOLT For aluminum to aluminum and aluminum to copper conductor splice/ tap connections. Sealant (XB) is recommended on all connections. Note: Body Top, spacer & bottom members Aluminum Alloy Hardware Aluminum Alloy For connectors without sealant, delete suffix XB. 0 LCU13XB LCU15XB LCU16XB CONDUCTOR RANGE INCHES 1/0 Str. 400 MCM AAC 1/ (18/1) ACSR MCM AAC MCM ACSR 1/0 Str. 400 MCM AAC 1/ (18/1) ACSR 1/0 Str. 400 MCM Cu 1/0 Str. 400 MCM AAC 1/ (18/1) ACSR 1/0 Str. 400 MCM Cu MCM AAC MCM ACSR MCM Cu 4-1/8 (104.78) 4- (117.48) 4- (117.48) -11/16 (68.6) 3-1/16 (77.79) 3-7/16 (87.31) 4- (114.30) 4-7/8 (13.83) 5- (139.70) (15.88) 1.07 (.49) 1.84 (.83) 1.86 (.84)

21 GENERAL USE PARALLEL GROOVE ALUMINUM 3 U-BOLT ALUMINUM LCU700 For aluminum to aluminum and aluminum to copper conductor splice/ tap connections. Sealant (XB) is recommended on all connections. Body Top, spacer & bottom members Aluminum Alloy Hardware Aluminum Alloy 1 LCU70055XB LCU70063XB LCU70064XB LCU70065XB LCU70066XB LCU70074XB LCU70076XB LCU70077XB LCU70085XB LCU70086XB LCU70087XB LCU70088XB LCU XB LCU XB LCU XB CONDUCTOR RANGE INCHES MCM AAC MCM ACSR MCM AAC MCM ACSR MCM AAC MCM ACSR MCM AAC MCM ACSR MCM AAC ACSR MCM AAC MCM ACSR 4/0 Sol. 350 MCM AAC 3/ (18/1) ACSR MCM AAC MCM ACSR MCM AAC MCM ACSR MCM AAC MCM ACSR MCM AAC MCM ACSR MCM AAC MCM ACSR MCM AAC MCM ACSR MCM AAC MCM ACSR MCM AAC MCM ACSR MCM AAC MCM ACSR MCM AAC MCM ACSR MCM AAC MCM ACSR MCM AAC MCM ACSR MCM AAC MCM ACSR 5-7/8 (149.3) 6- (171.45) 6- (171.45) 6- (171.45) 6- (171.45) 8 (03.0) 8 (03.0) 8 (03.0) 9- (31.78) 9- (31.78) 9- (31.78) 9- (31.78) 10 (54.0) 10 (54.0) 10 (54.0) 3-1/8 (79.38) 3-5/16 (84.14) 3-5/16 (84.14) 3-5/16 (84.14) 3-5/16 (84.14) 3-7/8 (98.43) 3-7/8 (98.43) 3-7/8 (98.43) 4-1/8 (104.78) 4-1/8 (104.78) 4-1/8 (104.78) 4-1/8 (104.78) 4- (111.1) 4- (111.1) 4- (111.1) 4-11/16 (119.06) 5-1/8 (130.18) 5-1/8 (130.18) 5-1/8 (130.18) 5- (139.70) 6 (15.40) 6 (15.40) 6- (161.93) 5- (146.05) 6- (161.93) 6- (161.93) 6- (161.93) 7 (177.8) 7 (177.8) 7 (177.8) (15.88) (15.88) (15.88) (15.88) (15.88) (19.05) (19.05) (19.05) (19.05) (19.05) (19.05) (19.05) (19.05) (19.05) (19.05).87 (1.30) 3.5 (1.47) 3.5 (1.47) 3.50 (1.59) 3.50 (1.59) 6.35 (.88) 6.50 (.95) 6.50 (.95) 8.50 (3.86) 8.50 (3.86) 8.75 (3.97) 8.75 (3.97) 7.85 (3.53) 7.85 (3.53) 6.85 (3.08)

22 /ALUMINUM SBS GENERAL USE SPLIT BOLT WITH SEPARATOR BAR: ALUMINUM AND For copper to copper conductors. Note: Copper Alloy, Electro Tin-Plated VERSA-SEAL oxide inhibiting compound is recommended for use with Al/Cu parallel connectors. * Hex Head design for maximum tool ease of use. LISTED 61L CONDUCTOR RANGE OF EQUAL MAIN & TAP (AWG OR MCM) MIN. TAP WITH INCHES MIN. MAX. ONE MAX. MAIN BOLT SIZE F W H SBS6 8 6* 14 7/16 SBS SBS /16 SBS10 4 1/ /16 SBS0 /0 8 SBS30 1 3/0 8 7/8 SBS SBS350 / /0 1- SBS /0 1- (15.88) 13/16 (0.63) 7/8 (.) 15/16 (3.81) 1-1/16 (6.97) 1-1/4 (31.75) 1- (34.93) 1- (38.01) 1- (44.45).49 (1.45).71 (18.03).75 (19.05).79 (0.07).87 (.10) 1.10 (7.94) 1.10 (7.94) 1. (30.99) 1.34 (34.04) 1.06 (6.9) 1.4 (31.5) 1.44 (36.58) 1.73 (43.94) 1.71 (43.43).13 (54.10). (56.39).56 (65.0).95 (74.93) 0.06 (.03) 0.09 (.04) 0.1 (.05) 0.18 (.08) 0.1 (.10) 0.35 (.16) 0.39 (.18) 0.60 (.7) 0.85 (.39) *AL9CU (90 C Rated) Not UL Listed or CSA certified for aluminum to copper connections. UL listed for copper connections only.

23 GENERAL USE SPLIT BOLT CONNECTOR SBN For copper to copper conductors. Body Copper Alloy LISTED 61L *Solid Conductor CONDUCTOR RANGE OF EQUAL MAIN & TAP (AWG OR MCM) MIN. TAP WITH INCHES MIN. MAX. ONE MAX. MAIN BOLT SIZE F W H SBN SBN6 8 6* 16 7/16 SBN SBN /16 SBN10 4 1/ /16 SBN0 /0 14 SBN30 1 3/0 8 7/8 SBN SBN350 / /0 1- SBN /0 1-9/16 (14.9) (15.88) 13/16 (0.63) 7/8 (.) 15/16 (3.81) 1-1/16 (6.97) 1-1/4 (31.75) 1- (34.93) 1- (38.01) 1- (44.45).47 (1).49 (1.45).71 (18.03).75 (19.05).79 (0.07).87 (.10) 1.10 (7.94) 1.10 (7.94) 1. (30.99) 1.34 (34.04) GENERAL USE PARALLEL GROOVE SINGLE CENTER BOLT For copper (Cu), Copperweld (CW) and guy strand (GS) connections..85 (1.59).91 (3.11) 1.16 (9.46) 1.5 (31.75) 1.54 (39.1) 1.69 (4.93).09 (53.09).09 (53.09).36 (59.94).83 (71.88) ST 0.04 (.0) 0.05 (.0) 0.08 (.04) 0.09 (.04) 0.14 (.06) 0.19 (.09) 0.30 (.14) 0.34 (.15) 0.51 (.3) 0.73 (.33) 3 Note: Body High Strength Bronze Alloy Hardware Silicon Bronze or Stainless Steel Add Suffix TP for Tin-Plated Version. ST3 ST4 CONDUCTOR RANGE (AWG) INCHES #8 Sol. /0 Str. Cu #8 A /0 F CW 1/8 7/16 CW/GS #6 Sol. 4/0 Str. Cu #6A 4/0 F CW 1/4 9/16 CW/GS #8 Sol. /0 Str. Cu #9 D /0 F CW 1/8 7/16 CW/GS #6 Sol. 4/0 Str. Cu #6A 4/0 F CW 1/4 9/16 CW/GS /8 (.) 15/16 (3.8) 1- (38.1) 1-7/8 (47.6) 1- (38.1) 1- (38.1) 5/16 (7.9) (9.5). (9.98).30 (13.61)

24 K, K_L GENERAL USE PARALLEL For copper to copper conductor connections. LISTED 61L Note: Body High Strength Bronze Alloy Retaining Ring Neoprene Rubber Hardware Silicon Bronze TP = Tin-Plated Version. 4 CONDUCTOR RANGE (AWG) INCHES K1 #4 Str. 1/0 Str. Cu #8 Sol. 1/0 Str. Cu K #3 Str. /0 Str. Cu #8 Sol. /0 Str. Cu K3 #1 Str. 4/0 Str. Cu #8 Sol. 4/0 Str. Cu K41 /0 Str. 350 MCM Cu #8 Sol. 350 MCM Cu K5 3/0 Str. 500 MCM Cu #8 Sol. 500 MCM Cu K MCM Cu #8 Sol. 800 MCM Cu K MCM Cu #8 Sol MCM Cu * For equal length bolts (Separable), Add L Suffix. For Tin-Plating, add TP Suffix - Consult Factory. KR 15/16 (3.81) 1-1/16 (6.99) 1-1/8 (8.58) 1- (34.93) 1- (38.10) 1- (41.8) 1-5/16 (33.34) 1- (41.8) 1- (44.45) -1/8 (53.98) -1/4 (57.15) - (63.50) 3 (76.70) GENERAL USE PARALLEL WITH SEPARATOR 1-5/16 (33.34) 1-1/3 (4.07) 1-15/16 (49.1) - (60.33) -11/16 (68.6) 3-3/16 (80.96) 3-11/16 (93.66) For copper to copper conductor connections. 5/16 (7.94) (15.88).15 (.06).9 (.13).40 (.18).655 (.30).80 (.36) 1.00 (.45).13 (.97) LISTED 61L Body High Strength Bronze Alloy Separator Copper Alloy Retaining Ring Neoprene Rubber Hardware Silicon Bronze CONDUCTOR RANGE (AWG OR MCM) INCHES KR1 #4 Str. 1/0 Str. Cu #8 Sol. 1/0 Str. Cu KR #3 Str. /0 Str. Cu #6 Sol. /0 Str. Cu KR3 #1 Str. 4/0 Str. Cu #6 Sol. 4/0 Str. Cu KR4 /0 Str. 350 MCM Cu #4 Sol. 350 MCM Cu KR5 3/0 Str. 500 MCM Cu #4 Sol. 500 MCM Cu KR MCM Cu # Str. 800 MCM Cu KR MCM Cu 1/0 Str MCM Cu * For equal length bolts (Separable), Add L Suffix. For Tin-Plating, add TP Suffix - Consult Factory. 15/16 (3.81) 1-1/16 (6.99) 1-1/8 (8.58) 1- (34.93) 1- (38.10) 1- (41.8) 1-5/16 (33.34) 1- (41.8) 1- (44.45) -1/8 (53.98) -1/4 (57.15) - (63.50) 3 (76.70) 1- (38.10) 1-5/3 (45.4) -1/8 (53.98) -9/16 (65.09) -15/16 (74.61) 3-7/16 (87.31) 4 (101.60) 5/16 (7.94) (15.88).18 (.08).35 (.16).43 (.19).78 (.35).86 (.39) 1.5 (.57).45 (1.11)

25 GENERAL USE PARALLEL GROOVE SINGLE U-BOLT LC1000 For copper to copper conductor connections. Body Halves High Strength Bronze Alloy Separator Copper Alloy Hardware Silicon Bronze * Add TP Suffix for Tin-Plated Connector CONDUCTOR RANGE (AWG OR MCM) For copper to copper conductor connections. INCHES LC100* # Sol. /0 Str. Cu # Sol. /0 Str. Cu LC1003* #1 Sol. 4/0 Str. Cu #1 Sol. 4/0 Str. Cu LC1004 1/0 Sol. 300 MCM Cu 1/0 Sol. 300 MCM Cu 1- (38.10) 1- (44.45) 1-15/16 (49.1) -5/16 (58.74) - 7/16 (61.91) GENERAL USE PARALLEL GROOVE U-BOLT - (69.85) 3 (76.0) 3- (88.90).65 (.9) 1.00 (.45) 1.15 (.5) LC Body Halves High strength Bronze alloy Separator Copper alloy Hardware Silicon bronze CONDUCTOR RANGE (AWG OR MCM) INCHES LC1133 #1 Sol. 4/0 Str. Cu #1 Sol. 4/0 Str. Cu LC /0 Sol. 350 MCM Cu 1/0 Sol. 350 MCM Cu LC1155 4/0 Sol. 500 MCM Cu 4/0 Sol. 500 MCM Cu LC MCM Cu MCM Cu LC MCM Cu MCM Cu - (69.85) 3-1/4 (8.55) 3- (85.73) 3- (9.08) 4 (101.60) 1-15/16 (49.1) - (63.50) - (66.68) -15/16 (74.61) 3-1/16 (77.79) 3 (76.0) 3- (9.5) 4 (101.60) 4- (114.30) 5 (17.00) 1.60 (.73).5 (1.0).40 (1.09).90 (1.3) 3.6 (1.64)

26 XP GENERAL USE PARALLEL GROOVE 4 WAY, /4 BOLT For copper to copper conductors cross, tee, parallel or end to end connections. Note: Body Members High Strength Bronze Alloy Separator Copper Alloy Hardware Silicon Bronze or Stainless Steel Add suffix TP for tin-plated connector. 6 LISTED 61L FIGURE 1 FIGURE FIGURE NO. CONDUCTOR RANGE (AWG OR MCM) INCHES XP #1 Str. 4/0 Str. Cu #1 Str. 4/0 Str. Cu XP /0 Str. 500 MCM Cu 4/0 Str. 500 MCM Cu XP MCM Cu 4/0 Str. 500 MCM Cu XP MCM Cu MCM Cu 1-7/8 (47.63) - (63.50) 1-7/8 (47.63) - (63.50) -9/16 (65.09) 3-3/16 (80.96) 3- (85.73) 3-11/16 (93.66).70 (.3) 1.40 (.64) 1.70 (.77).40 (1.09)

27 GENERAL USE PARALLEL GROOVE MULTIPLE CENTER BOLT LC400 For copper to copper conductor connections. Note: Body High Strength Bronze Alloy Hardware Silicon Bronze or Stainless Steel Add suffix TP for tin-plated Connector. FIGURE 1 FIGURE NO. FIGURE CONDUCTOR RANGE (AWG OR MCM) INCHES LC40 1 #4 Sol. 4/0 Str. Cu #4 Sol. 4/0 Str. Cu LC405 1 #4 Sol. 4/0 Str. Cu #4 Sol. 4/0 Str. Cu LC # Sol. 300 MCM Cu # Sol. 300 MCM Cu LC404 4/0 Str. 500 MCM Cu 4/0 Str. 500 MCM Cu LC MCM Cu MCM Cu -9/3 (57.94) -13/16 (71.44) 3-1/8 (79.38) 4- (111.13) 5-1/8 (130.18) 1-7/3 (46.83) -1/4 (57.15) - (66.68) 3- (88.90) -1/4 (57.15) -1/4 (57.15) -1/4 (57.15) - (66.68) 3- (85.73).8 (.37) 1.38 (.6) 1.79 (.81).99 (1.36) 4.70 (.13) 7 GENERAL USE PARALLEL GROOVE SINGLE CENTER BOLT LC1600 For copper to copper conductor connections. Note: Body High Strength Bronze Alloy Hardware Silicon Bronze or Stainless Steel Add suffix TP for tin-plated Connector. CONDUCTOR RANGE (AWG OR MCM) INCHES LC1601 1/0 Sol. 4/0 Str. Cu #8 Sol. #1 Str. Cu LC160 1/0 Sol. 400 MCM Cu #8 Sol. 3/0 Str. Cu - (60.33) 1- (44.45) -1/4 (57.15) - (69.85).58 (.6) 1.05 (.48)

28 SNAP TAP PLASTIC COVER PLASTIC PTC PTC Snap-on covers for aluminum compression taps. PTC51 & 5 Snap-on covers for mechanical center bolt taps. Black Plastic 8 PTC51 PTC PTC** DESCRIPTION For use on D die AC s or any H-frame connectors up to long, VCP-43A, VCP-44 VAC-1040 and VAC (.0318) **RUS Listed PTC51** For use on center bolt connectors LC-51A, LC-51C, LC5A, LC511A and LC-5A.05 (.036) PTC5** For use on center bolt connectors LC-5C, LC-81A, LC-811A, LC (.037)