VERSAtile ALUMINUM COMPRESSION TERMINAL TYPE VCEL
|
|
- Grant Sparks
- 6 years ago
- Views:
Transcription
1 VERSAtile UMINUM COMPRESSION TERMIN TYPE VCEL UMINUM VCEL For use with either VERSA-CRIMP or conventional compression tools For size-for-size replacements for original equipment set screw mechanical lugs, when recommended by the equipment manufacturer. UL listed for both concentric and compact aluminum and concentric copper conductor Meets ANSI C9. Class A performance on aluminum concentric conductor Color coded end plugs for easy die selection (see page -5). T L -/ Material: Body Aluminum Alloy-Tin Plated Factory Inhibited LISTED L FIG. FIG. W 9 (90 RATED) CATOG FIG. NO. VCEL0S UMINUM OR COPPER CONDUCTOR DIMENSIONS INCHES CONVEN- TION TOOLING VERSA-CRIMP SYSTEM VERSA- CRIMP TOOL TYPE PAD BOLT DIA. L W T APPROX. LBS. (KG) I.D. INCHES / -/ (.5) 9/ (5.) / (.).0 (.0).0 (0.) VCEL05H /0 Str. Al/Cu #8/0 Str. Al/Cu 5/ -/ (.5) 9/ (5.) / (.).0 (.0).0 (0.) VCEL08H /8-7/ (.7) / (7.5) / (.).0 (.0).0 (0.) VCEL05H 5/ -7/ (57.) (5.) 9/ (7.). (.05).5 (.5) VCEL08H /0 Str. Al/Cu #/0 Str. Al/Cu (L) /8-7/ (57.) (5.) 9/ (7.). (.05).5 (.5) VCEL05H 5/ -7/ (57.) (5.) 9/ (7.). (.05).5 (.) /0 Str. Al/Cu /0/0 Str. Al/Cu VCEL08H /8-7/ (57.) (5.) 9/ (7.). (.05).5 (.) VCEL005H 5/ -7/ (57.) (5.) 9/ (7.).0 (.0).5 (.7) 00 MCM Al/Cu #00 MCM Al/Cu VCEL008H /8-7/ (57.) (5.) 9/ (7.).0 (.0).5 (.7) VCEL055H 5/ -7/ (57.) (5.) 9/ (7.).0 (.0).7 (8.) 50 MCM Al/Cu MCM Al/Cu VCEL058H /8-7/ (57.) (5.) 9/ (7.).0 (.0).7 (8.) VCEL0508H MCM Al/Cu /0 MCM Al/Cu FT /8 -/ (8.) -/ (0.) (.7).0 (.09).8 (.) VCEL050H -/ (8.) -/ (0.) (.7).0 (.09).8 (.) VCEL050H MCM Al/Cu /0 MCM Al/Cu 5-/ (8.0) -/ (0.) (.7).0 (.).98 (.) VCEL00H 00 MCM Al 00-00MCM Al 00 MCM Cu -/ (9.7) -5/ (.0) (.7).8 (.).98 (.) VCEL00H 00 MCM Al VCEL075H 750 MCM Al 00-00MCM Al 00 MCM Cu -750MCM Al MCM Cu FT 5-9/ (.) -/ (9.7) -5/ (.0) -5/ (.0) (.7) (.7).0 (.8).5 (.).98 (.).0 (.) VCEL075H 750 MCM Al -750MCM Al MCM Cu 5-9/ (.) -5/ (.0) (.7). (.).0 (.) HIGH VOLTAGE APPLICATIONSAll Aluminum/Copper and Copper Lugs (VCEL, VACL, VHCL, VHCS and VCELC) are rated at.5kv. The other U.L. Listed compression connectors (VACS, VACT, VCCT, VHSS and VHS) have a maximum UL voltage requirement of less than 000 volts, however Anderson recommends these connectors for application through.5 KV subject to manufacturers limitations for insulation material. For further information, contact factory. ANDERSON HUBBELL POWER SYSTEMS FARGO November 07
2 UMINUM VACL VERSAtile UMINUM COMPRESSION TERMIN TYPE VACL T L D For use with either VERSA-CRIMP or conventional compression tools. UL listed for aluminum or copper conductors. Factory inhibited Color coded end plugs for easy die selection (see page - and -7). Material: Body Aluminum Alloy-Tin Plated 9 (90 RATED) W LISTED L CATOG NO. PAD HOLES VACL UMINUM OR COPPER CONDUCTOR CONVENTION- TOOLING VERSA- CRIMP TOOL TYPE DIMENSIONS INCHES PAD VERSA-CRIMP SYSTEM BOLT DIA. L D W T # Str. Al/Cu # Str. Al/Cu 50 VACL8 /8 / -5/ (58.7) -5/ (58.7) (5.) (5.) / (0.) / (0.) /8 (.) /8 (.) APPROX. LBS. (KG).0 (.0).0 (.0) I.D. INCHES.5 (.).5 (.) VACL / VACL5 # Str. Al/Cu ## Str. Al/Cu 5/ - (.5) - (.5) -/8 (8.) -/8 (8.) 7/8 (.) 7/8 (.) / /.0 (.0).0 (.0). (7.9). (7.9) VACL8 /8 - (.5) -/8 (8.) 7/8 (.) /.0 (.0). (7.9) VACL5 5/ # Str. Al/Cu ## Str. Al/Cu VACL8 /8 -/ (9.9) -/ (9.9) -/8 (8.) -/8 (8.) / (9.0) / (9.0) / /.05 (.0).05 (.0).50 (8.9).50 (8.9) VACL08 (L) /8-5/ (7.) -5/ (.) / (0.) /.05 (.0).9 (0.0) VACL0 /0 Str. Al/Cu #8/0 Str. Al/Cu -/8 (79.) -5/ (.) / (0.) /.05 (.0).9 (0.0) VACL0BN -7/8 (8.8) -5/ (.) / (0.) /.05 (.0).9 (0.0) VACL08 /8-5/ (7.) -5/ (.) 5/ (.8) / (.).07 (.0).50 (.) VACL0 /0 Str. Al/Cu #/0 Str. Al/Cu -/8 (79.) -5/ (.) 5/ (.8) / (.).07 (.0).50 (.) VACL0BN -7/8 (8.8) -5/ (.) 5/ (.8) / (.). (.05).50 (.) Continued on next page. HIGH VOLTAGE APPLICATIONSAll Aluminum/Copper and Copper Lugs (VCEL, VACL, VHCL, VHCS and VCELC) are rated at.5kv. The other U.L. Listed compression connectors (VACS, VACT, VCCT, VHSS and VHS) have a maximum UL voltage requirement of less than 000 volts, however Anderson recommends these connectors for application through.5 KV subject to manufacturers limitations for insulation material. ANDERSON HUBBELL POWER SYSTEMS FARGO November 07
3 TYPE VACL UMINUM COMPRESSION TERMIN (CONTINUED) CATOG NO. PAD HOLES VACL08 UMINUM OR COPPER CONDUCTOR CONVENTION- TOOLING VERSA- CRIMP TOOL TYPE DIMENSIONS INCHES PAD VERSA-CRIMP SYSTEM BOLT DIA. L D W T /8 (7.) APPROX. LBS. (KG).0 (.0) I.D. INCHES.50 (.8) VACL0 /0 Str. Al/Cu #/0 Str. Al/Cu -/ (8.0) -5/ (.) -/ (.99) / (.).0 (.0).50 (.8) VACL0BN -5/ (5.). (.07).50 (.8) VACL08 /8-5/ (8.). (.0).5 (.) VACL0 /0 Str. Al/Cu #/0 Str. Al/Cu (L) VACL0BN - (88.9) 5-/ (.) - (8.) -/ / (.). (.0).0 (.09).5 (.).5 (.) VACL50 50 MCM Al/Cu /050 MCM Al/Cu VACL50BN -9/ (90.5) - 5-5/ (8.) (.9) -/ 5/ (7.9). (.07).5 (.).05 (5.).05 (5.) VACL00 00 MCM Al/Cu /000 MCM Al/Cu VACL00BN -/ (95.) - 5- (8.) (9.7) -/8 (.9) /8 (90.5).9 (.09). (.).0 (.8).70 (7.0) VACL50 50 MCM Al/Cu /050 MCM Al/Cu VACL50BN -/ (0.) -5/8 5-/ (.) (7.) - (8.) /8 (9.5). (.). (.).7 (8.).7 (8.) VACL00BN 00 MCM Al/Cu /000 MCM Al/Cu FT -/ (.0) -5/8 (.) 7/ (.).5 (.0).758 (9.) VACL MCM Al/Cu /0 MCM Al/Cu VACLBN -/ (9.0) -5/ -7/ (58.7) (.5) -/ (.9) /8 (9.5). (.0). (.8).8 (.).8 (.) VACL00BN 00 MCM Al MCM Al 50- MCM Cu 7-/8 (80.98) -5/ (7.) -7/8 (7.7) 7/ (.).7 (.).9 (.) FT VACL MCM Al 750 MCM Al MCM Cu VACL750BN 5-/8 (.5) -5/ 7-/8 (7.) (80.98) -5/ (9.) 5/ (7.9).85 (.8).98 (.).08 (.).08 (.) VACL000BN 000 MCM Al 700 MCM Al 7-/ (98.) -/ (9.8) -5/8 (.7) / (7.5). (.).8 (0.0) Refer to pages - and -7 for recommended tool and die information. Note: All two hole terminals are on NEMA -/ centers. HIGH VOLTAGE APPLICATIONSAll Aluminum/Copper and Copper Lugs (VCEL, VACL, VHCL, VHCS and VCELC) are rated at.5kv. The other U.L. Listed compression connectors (VACS, VACT, VCCT, VHSS and VHS) have a maximum UL voltage requirement of less than 000 volts, however Anderson recommends these connectors for application through.5 kv subject to manufacturers limitations for conductor insulation material. ANDERSON HUBBELL POWER SYSTEMS FARGO November 07
4 UMINUM PT & PTH BI-METLIC PIN TERMINS FOR JOINING UMINUM CONDUCTORS TO COPPER EQUIPMENT TYPES PT & PTH For use with VERSA-CRIMP or die-type tooling Sleeve connector is factory compressed over knurled surface of tinned annealed copper rod. Provides a compatible bi-metallic transition for joining aluminum conductor to copper based transformer or other equipment terminals. Installed with popular dies. Prefilled with rubber compatible electrical joint compound and plugged. Material: Aluminum Copper Rod Tin Plated CATOG PT5 PT5 PT5 PT PTH PT0S5 PT0S PTH0 PT0 PT005 PT00 PT00 PT00 PT90 PT0050 PT5050 PT0050 PT50 PT80075 CONDUCTOR CONVENTION COMPRESSION VERSA CRIMP UM ACSR INCHES UM INCHES Sol., Str. #8 Str. - # Sol. Al & Comp # ACSR.-.0 Sol., - Str. #8 Str. - # Sol. Al & Comp #-# ACSR Str. /0 Sol. #8-# Str. Al Comp Str. #-# ACSR Str. /0 Sol. #8-# Str. Al Comp Str. #-# ACSR Str. /0 Sol. #8-# Str. Al Comp Str. #-# ACSR.-.8 /0 Str. #8-/0 Str. Al. / /0 Comp #8-/0 ACSR.-.98 /0 Str. #8-/0 Str. Al. / /0 Comp #8-/0 ACSR.-.98 /0 Str. #8-/0 Str. Al. / /0 Comp #8-/0 ACSR.-.98 /0 Str. #-/0 Str. Al. / /0-/0 Comp #-/0 ACSR.-.98 /0 Str. #-/0 Str. Al. /0.-.8 /0 Comp #-/0 ACSR.-.8 /0 Str. #-/0 Str. Al. /0.-.8 /0 Comp #-/0 ACSR.-.8 /0 Str. #-/0 Str. Al. / /0 Comp #-/0 ACSR.-.50 /0-50 Str. #-50 Str. Al. / Comp #5-/0 ACSR Str. #-50 Str. -8/ Comp #--8/ Str. /0 /0-00 Str Comp. -8/ /0-.8-8/ Str. -/7 /0-50 Str Comp. -8/ /0-.-8/ Str. -/ /0-00 Str..-.7 Comp. Str. 97-8/ /0-97-8/ Str. 97-8/ /0- Str Comp. Str. 77-8/ /0-77-8/ Str. 05-/ Str Comp. Str. 75-/ 05-/-75-/ RECOMMENDED CRIMPING DIE CODES/VC-TOOLS ANDERSON- (L) EEI8A -BG, -5/8 COA-08AH -TU 5 BLACKBURN-5/8 ANDERSON- (L) EEIA -9,80-80 COA-AH -TX 7 BLACKBURN-80 or B9 ea. ANDERSON-FT & EEIA; COA-AH -,55,705 --/8-9 BLACKBURN B80 ea. ANDERSON 0,, 08, 7, 78 - COA- AH -5 A PIN (DIA.) Sol. (.0 ) Sol. (.0 ) Sol. (.0 ) Sol. (.58 ) Sol. (.58 ) Sol. (.58 ) Sol. (.58 ) Sol. (.58 ) Sol. (.58 ) /0 Sol. (.5 ) /0 Sol. (.5 ) /0 Sol. (.5 ) /0 Sol. (.5 ) /0 Sol. (.0 ) /0 Sol. (.0 ) /0 Sol. (.0 ) /0 Sol. (.0 ) /0 Sol. (.0 ) / (.750 ) L B INCHES INCHES - (.5) - (.5) - (.5) - (.5) - (.5) (5.) (5.) (5.) (5.) -/ (.) (5.) (5.) -/ (.) -7/8 (7.75) -7/8 (7.75) -7/8 (7.75) -7/8 (7.75) -7/8 (7.75) -7/8 (7.75) -7/8 (7.5) -7/8 (7.5) -7/8 (7.5) -7/8 (7.5) -7/8 (7.5) COLOR CODE BLUE OR- ANGE RED RED RED YELLOW YELLOW YELLOW YELLOW GRAY GRAY BLACK PINK ANDERSON HUBBELL POWER SYSTEMS FARGO November 07
5 VERSAtile UMINUM COMPRESSION TERMIN TYPE VAUL UMINUM VAUL For use with either VERSA-CRIMP or conventional compression tools. Meets ANSI C 9. Class A performance on aluminum and ACSR conductor, minimum tension. Meets ANSI C 9. Class C performance on copper conductor, minimum tension. Connector barrels are prefilled with Versa-Seal rubber compatible inhibitor and sealed with color coded ( /0) end caps. Metal marked to indicate recommended conductors and crimp dies. Material: Note: Aluminum Add Suffix TP for tin plated lugs. CATOG FIG. NO. VAUL8 VAUL CONDUCTOR AWF OR MCM VERSA-CRIMP SYSTEM CONVENTION TOOLING INCH- ES DIA. CABLE INCH- ES DIA. ACSR STRAND- ED (SOLID)....0 VAUL. VAULBN.8 VAUL. VAULBN. VAUL0. VAUL0BN VAULH VAULH VAULH. VAULHBN. VAULH0. K # (/), 9 (8.5) (.) (.) (.) (0.0) (8.) #-# # - # (7/) RED (.0).5.9 (7.5). (.).5 (0.0). (8.). /0 (/) /0 /0-/0 TX, 7 YEL- (8.5) (.) (.) (.) (0.05) (0.5) BLACK- LOW (8.5) (.) (.) (.) (0.05) /0(/) /0 /0 B9EA GRAY (.0) (7.5) (.) (0.09) BURN (.0) (7.5) (.) (0.0) (0.5) Continued on next page. VAUL- H0BN.98 VAUL0. VAUL0BN.7 #8 STR (# SOL) #8 STR # SOL # ACSR #8 STR - # SOL #-# ACSR #-# COMP #8 STR. # STR #-# ACSR #-# COMP #8 STR-/0 STR #-/0 ACSR #-/0 COMP #8 STR. # SOL # ACSR #8 STR-# SOL #-# ACSR #-# COMP #8 STR-# #-# ACSR #-# COMP # STR-/0 #-/0 ACSR #-/0 COMP # STR-/0 #-/0 ACSR #-/0 COMP # (/) # (/), (7/) #8 (# SOL) # (# SOL) # (# SOL) DIMENSIONS INCHES 50 FT BLUE # EEI8A BG. 5/8 /0 (/) /0 /0-/0 # (/) # (/), (7/) # (# SOL) # (# SOL) BURN 5/8 # 50 # FT EEIA GREEN.0 (77.7) ANGE CRIMP COM- DIES/ COLOR PACT VC-TOOL CODE L W D T # (/), #-# # (7/) TU.5 RED BLACK- OR- YEL- LOW BLUE ANGE.0 (77.7).0.90 (.8).90 (.8).90 (77.7) (.8) (.9) (5.).0.90 (77.7) (.8) (.9) (5.).0.90 (77.7) (.8) (.9) (5.).5 (8.5).5 (8.5).9 (.).9 (.). (.). (.).7 (.8).7 (.8).7 (.8). (7.8).7 (.8). (7.8).7 (.8). (7.8).5 (.).5 (.) AP- PROX. LBS. (KG.).087 (0.0).07 (0.0).07 (0.0).9 (0.0).09 (0.0).9 (0.0).05 (0.0).0 (0.05).5 (0.0). (0.0) I.D. INCH- ES.8. (5.9).8 (7.).8 (7.).55 (9.0).55 (9.0). (0.). (0.) OR-.8 (5.5).7 (.9) 5 ANDERSON HUBBELL POWER SYSTEMS FARGO November 07
6 CATOG FIG. NO. TYPE VAUL UMINUM COMPRESSION TERMIN (CONTINUED) VERSA-CRIMP SYSTEM INCHES DIA. VAUL0. VAUL0BN.50 VAUL0 VAUL0BN..575 VAUL50. VAUL50BN.575 VAUL00 VAUL00BN.0 VAUL50 VAUL50BN.8 VAUL0 VAUL0BN VAUL00 VAUL00BN VAUL VAULBN VAUL00BN VAUL750BN VAULHBN VAULH700BN VAUL800BN VAUL000BN CONDUCTOR AWF OR MCM CABLE # STR-/0 #-/0 ACSR #-/0 COMP # STR-50 #5-/0 ACSR #-00 COMP /0-50 STR /0-/0 ACSR /0-00 COMP /0-00 STR /0-.8 (8/) ACSR /0-50 COMP /0-50 STR /0-. (8/) ACSR /0-00 COMP /0-50 STR /0-. (8/) ACSR /0-00 COMP /0-00 STR / (8/) ACSR /0- COMP /0- STR /0-77 (8/) ACSR COMP STR (8/) ACSR COMP -750 STR (/) ACSR COMP /0- STR /0-77 (8/) ACSR COMP STR.-. (8/) ACSR COMP -800 STR (/) ACSR COMP STR 8-95 (/) ACSR COMP DIMENSIONS INCHES CONVENTION TOOLING INCHES DIA. ACSR STRANDED (SOLID) COM- PACT CRIMP DIES/ VC-TOOL COLOR CODE L W D T (8.5) (.) (.) (.) /0 (/) /0 /0 BLACK (.0) (7.5) (.) /0 (/) /0-50 /0 (/) (8/). (8/).8 (8/), (/7). (8/). (8/), (/7), (0/7) 97.5(8/) 97.5 (/7), (/7) 77 (8/), (/) 77 (/7), (/7) 55.5 (/), (8/) 55.5 (0/7) (8/) 05 (/7), (/7) 75.5 (/) 97.5 (8/), (/7), (7/7), (0/7) 77 (/), (8/) 55.5 (/7), (/7) 05 (/7), (/7), (/) (8/), (/) (/7), (/7). (/7) 75.5 (/) 795 (/7), (/7) 900 (5/7) 95 (/) 50 FT EEIA K TX, 7 BLACKBURN 80 B9EA PINK 50 FT 00 EEIA 5 9/ TH,87 BLACKBURN BEA FT EEIA, 7 55, 705 -/8 9 BLACKBURN B80EA FT EEIA 7, 7, 79-5/ 0 BLACKBURN B0AH , 7, 78-0 COA AH (8.5) 5.75 (.0).59 (.). (.0).59 (.). (.0).59 (.). (.0). (.8).8 (57.0). (.8).8 (57.0). (.8).8 (57.0).87 (7.5).87 (7.5) 7.5 (8.) 7.5 (8.) 7.5 (8.) 7.5 (8.).9 (.).50 (8.).0 (0.).0 (0.).0 (0.).0 (0.). (.).87 (7.5). (.0). (.0). (.0). (.0). (.0). (.0) (0.) (0.) (0.) (0.) (0.).88 (7.).00 (7.).00 (7.).9 (8.0).9 (8.0).9 (8.0).9 (8.0).5 (.).5 (.).5 (.).5 (.). (.0). (.0). (.0). (.0) AP- PROX. LBS. (KG.).09 (0.05).00 (0.09).0 (0.05).90 (0.09).0 (0.).9 (0.5).7 (0.). (0.5). (0.). (0.).7 (0.). (0.).58 (0.).9 (0.5). (0.).90 (0.8).550 (0.5).50 (0.).898 (0.).87 (0.8).79 (0.).7 (0.) I.D. INCH- ES ANDERSON HUBBELL POWER SYSTEMS FARGO November 07
7 Catalog Number VCEL V-C s Range #8-/0 Str. #-/0 Str. /0-/0 Str. #-00 MCM / MCM /0 - MCM / MCM MCM -750 MCM MCM ANDERSON VERSA-CRIMP COMPRESSION TOOLS VERSA-CRIMP s (Number of Crimps) 50 j FT Crimping Information VCEL NIBS Size /0 Str. /0 Str. /0 Str. 00 MCM 50 MCM MCM 00 MCM 750 MCM CONVENTION COMPRESSION DIE TOOLING Burndy Longitudinal Indent Kearney Thomas & Betts (Crimps) (Crimps) (Crimps) k Color* Code s Y5 Y9 Y5 s WH s TBM5 TBM8 Hyd. s, 5 0 & 0 Ton Tan 5 Tan U5ARTj ( ) 9/ 7H or Blue U0ART Blue U0ART Blue U0ART Blue U0ART Green Pink Pink U ART UM or UART UART or 9/ or 9/ or 9/ -/8 - ( ) or -/8 - -/ + -/ + 8H 7H or 8H 7H or 8H 7H 9H 0H 0H TOOLS/DIES (VCEL - 00 ONLY) Y8B MCM None MCM Nest Indentor CD CAR Y8PR- + WH- ONLY Before making first crimp, make certain that the edge of the die block is located to clear the back edge of the VCEL tongue. j Partial crimp. Crimp dies extend beyond the end of the crimp barrel. k Color code is for Anderson and Burndy dies only. Use the recommended die number (NOT die color) for Kearney & Hyd. s/s. * Not UL Listed-pending completion of test. Y8RB FAR Nest Indentor FD Y8PR- ANDERSON HUBBELL POWER SYSTEMS FARGO November 07
8 8 VACL/VACS/VACTAnderson/Burndy CONVENTION COMPRESSION DIE TOOLING ANDERSON VERSA-CRIMP COMPRESSION TOOLS Burndy Indentor s ( Crimp) Burndy (Crimps) VERSA-CRIMP s (Number of Crimps) Y8RB (Indentor) Y8B (Indentor) YB (Indentor) YA (Indentor) MY- 9 Y8RB Y8B YB s Y5 Y9 YA Nest Nest Nest Nest Index No. Color Code Size (AWG or MCM) NIBS FT 50 * V-C s Range (AWG or MCM) Catalog Number VACL VACS VACT #8 U8CABT Blue 7 #8-8 #8 BCD (YPA) ACD (YPA) # # BCD UCABT ACAB Gray # # # # /0 /0 /0 /0 - # BCD (YPA) BD (YPA) ACD (YPA) AD (YPA) CCAB BCD BCD BCD B5D BD B7D B8D B9D UCABT * ACAB ACAB A5AR A5AR Green 75 - # # UCABT Pink 8 - #-# B7D A7D # /0 /0 /0 U5ART * Tan 9 - #8-# B7D B9D B0D BD A7D A9D A0D AD U5ART * Tan 9 -/0 #8-/0 UART AAR Olive 97 -/0 #-/0 U7ART U8ART U9ART A7AR A8AR A9AR Ruby 7 -/0 #-/0 /0 F8AR C8AR White 98 -/0 #-/0 BD AD F9AR F0AR FAR C9AR Red /0-50 FD (Y8PR-) CD (Y8PR-) No AD (YPR-) C0AR CAR B0D U0ART A0AR Blue /0-00 F5D (Y8PR-) FD (Y8PR-) C5D (Y8PR-) BD UART -50 Brown 99 /0-50 CD (Y8PR-) FAR CAR BD UART -00 Green 7 / FAR CAR No Required UART - Green 7 /0-7 FAR CAR UART 00 Pink FAR FAR CAR UART 750 Pink FD (Y8PR-) CD (Y8PR-) CAR 000 Brown TBM-8 ONLY H Anderson HC- s, Burndy s Y-5 s and Blackburn s JB- s are interchangeable. VACL Lug sizes -50 to - take less crimp ( s) than shown. Color code is for Anderson and Burndy dies only. Use the recommended die number (NOT die color) for Blackburn, Kearney & Hyd. s/s. The VACL lugs are qualified for UL HV applications. The VACS sleeves and VACT tee connectors are for to or to connections ONLY. (NOT for to connections). * Not UL Listed-pending completion of test. ANDERSON HUBBELL POWER SYSTEMS FARGO November 07
9 VACL/VACS/VACTAnderson/Others CONVENTION COMPRESSION DIE TOOLING ANDERSON VERSA-CRIMP COMPRESSION TOOLS Thomas & Betts (Crimps) Kearney (Crimps) Blackburn (Crimps) VERSA-CRIMP s (Number of Crimps) 5 Ton Hyd. Ton Hyd. s TBM5 TBM8 s (No. of Crimps) JB-A OD-58 WH- PH- WH- PH- O-5 Color Code Size (AWG or MCM) NIBS FT 50 * V-C s Range (AWG or MCM) Catalog Number VACL VACS VACT Blue / B7CH BY7C Blue #8-8 #8 9 9 Gray 5/ B7CH BY9C Gray # # # # /0 /0 /0 / # H Green Pink Tan Tan Olive Ruby /8 UCABT * BYC BYC Green - # BOCH Pink - #-# 9/ U5ART * BYC Tan - #8-# 9/ U5ART * BY5C BYC Tan -/0 #8-/0 5 5/8- B09CH Olive -/0 #-/0 / BCH B0CH BCH BY7C Ruby -/0 #-/0 7H 7H +White 78 BY5C BY7C White -/0 #-/0 7 7H 87H 9H 99H +Red 80 Red -50 / H +Blue +Brown 9/ BEA Blue /0-00 / -00 9H 99H BCH /0-50 / /0-00 / /0- / -50 -/8- Brown B80EA -00 -/8- Green 5 9 9H B80EA - -/8- Green 7 0H 0H -5/ B0AH B0AH 00 Pink H 0H -5/ 750 Pink Brown TBM-8 ONLY H Anderson HC- s, Burndy s Y-5 s and Blackburn s JB- s are interchangeable. VACL Lug sizes -50 to - take less crimp ( s) than shown. Color code is for Anderson and Burndy dies only. Use the recommended die number (NOT die color) for Blackburn, Kearney & Hyd. s/s. The VACL lugs are qualified for UL HV applications. The VACS sleeves and VACT tee connectors are for to or to connections ONLY. (NOT for to connections). * Not UL Listed-pending completion of test. 9 ANDERSON HUBBELL POWER SYSTEMS FARGO November 07
10 COPPER VCELC L -/ VERSAtile COPPER COMPRESSION TERMIN TYPE VCELC For use with either VERSA-CRIMP or conventional compression tools. Compact design for use in molded case equipment where space is limited. For use with copper stranded conductor only. Color coded bands for easy die selection. T Material: Note: Copper Tin Plated For additional -hole or -hole sizes, contact factory. W FIG. FIG. LISTED L CATOG FIGURE CONVENTION TOOLING VERSA-CRIMP SYSTEM VERSA- CRIMP TOOL TYPE PAD BOLT DIAMETER DIMENSIONS INCHES L W T APPROX. LBS. (KG.) 0 VCELC008H 00 MCM Cu /0-00 MCM Cu VCELC050H MCM Cu 50- MCM Cu VCELC050H MCM Cu 50- MCM Cu VC7 FT VC7FT /8 (9.5) (.7) (.7).0 (57.).0 (8.) 5.00 (8.0).0 (5.).87 (0.).87 (0.).8 (7.). (.7). (.7).9 (.).5 (.0).8 (.8) VCELC075H 750 MCM Cu MCM Cu FT VC7FT & (.7).50 (9.7).0 (.0). (.7).70 (.9) Refer to page -9 for recommended tool and die information. HIGH VOLTAGE APPLICATIONSAll Aluminum/Copper and Copper Lugs (VCEL, VACL, VHCL, VHCS and VCELC) are rated at.5 KV. The other U.L. Listed compression connectors (VACS, VACT, VCCT, VHSS and VHS) have a maximum UL voltage requirement of less than 000 volts, however Anderson recommends these connectors for application through.5 KV subject to manufacturers limitations for insulation material. For further information, contact factory. APPLICATION RECOMMENDATIONS WITH WELDING CABLE* FOR INSTLATION WITH VC7 TOOLING ONLY CATOG VCELC008H VCELC050H VCELC050H VCELC075H WELDING CABLE #-59 Str. #- Str. #-5 Str. #-5 Str. #-89 Str. /0-0 Str. /0-9 Str. /0-5 Str. /0-07 Str. * Not U.L. listedu.l. does not recognize Welding Cable for commercial wiring. ANDERSON HUBBELL POWER SYSTEMS FARGO November 07
11 CATOG VCELC V-C s Range (Copper Only) 00 /0-00 MCM ANDERSON VERSA-CRIMP COMPRE VERSA-CRIMP s (Number of Crimps)A Overlap -FT Overlap VC7 Overlap VC7 -FT Overlap VCELC NIBS Copper Size 00MCM CONVENTION COMPRESSION DIE TOOLING (Crimps Per Connection) Burndy Burndy Kearney (Crimps) (Crimps) (Crimps) Thomas & Bet Color Code MCM MCM Green MCM 750 MCM Pink Blue Y5 and Y9 U0ART UART U-M or UART MD- Note + WH- only. Before making first crimp, make certain that the edge of the die block is located to clear the back edge of the VCELC tongue. * Partial crimp. Crimp dies extend beyond the end of the crimp barrel. NOTE: VCELC copper equipment terminals cannot be used with type 50 tools. s WH 9/ or -/8- + ( ) -/8-+ -/ s TBM5 TBM8 Hyd. s, 5 0 & 0 Ton 7H or 8H 9H 0H APPLICATION RECOMMENDATIONS WITH WELDING CABLE *FOR INSTLATION WITH VC7 TOOLING ONLY CATOG OF CRIMPS WELDING CABLE CATOG OF CRIMPS WELDING CABLE VCELC008H Overlap #-59 STR #- STR #-5 STR #-5 STR #-89 STR VCELC050H VCELC075H /0-0 STR /0-9 STR /0-5 STR /0-07 STR Note * Not U.L. ListedU.L. does not recognize Welding Cable for commercial wiring. ANDERSON HUBBELL POWER SYSTEMS FARGO November 07
OVERHEAD LINE SPLICES AUTOMATIC COPPER
OVERHEAD INE SPICES AUTOMATIC COPPER Fastest method of splicing copper & copperweld conductor Inhibitor protected for optimum long term performance Individually bagged to seal out dirt before use Ratings:
More informationPhone: Fax:
SEPTEMBER 2007 www.nsiindustries.com Phone: 800.321.5847 Fax: 800.841.5566 Mechanical Connectors Dual Rated Single & Double Lugs........................ 1 Panelboard Lugs............................ 1
More informationDIVISION 26 ELECTRICAL Electrical Power Conductors and Cables
PART 1 - GENERAL 1.01 DESIGN REQUIREMENTS A. Scope: Power Conductors and Cables in this section are defined as system voltages above 120V and less than 600V. B. System Voltages Three Phase and Single Phase:
More informationSmall Terminals. TEST CURRENT (Amps) Fig 1. Tensile strength of YAD HYLUG after axial rotation stresses. TENSILE STRENGTH IN POUNDS
B-2 Performance The terminals and splices in this catalog are approved, per MIL-T-7928 and/or UL 486, where indicated. Table 1 shows the performance requirements for terminals used in military and commercial
More informationWelding Accessories
Welding Accessories www.airliquide.ca 1-800-817-7697 Welding Accessories BLUESHIELD Welding Cables Blueshield Welding Cables: Excellent flexibility (stays flexible at -50 C) Abrasion resistant Oil, solvent
More informationSECTION GROUNDING AND BONDING
SECTION 16060 PART 1 GENERAL 1.01 DESCRIPTION A. Section includes requirements for an electrical grounding system, including electrodes, grounding rods, connectors, insulators, equipment grounding and
More informationTEMPORARY PROTECTIVE GROUNDING EQUIPMENT
TEMPORARY PROTECTIVE GROUNDING EQUIPMENT TEMPORARY PROTECTIVE GROUNDING EQUIPMENT NOTE: When ordeing assemblies of grounding products, please make sure all items included in the assembly are only from
More information*** Supercedes: BECO E and COM , , & ***
7/27/09 Page 1 of 9 R5 *** Supercedes: BECO E2.9-27.4 and COM 1-0696, 2-0196, & 5-0385 *** 1.0 Scope #2 AWG to 1000 KCMIL CONCENTRIC NEUTRAL JACKETED CABLES RATED 5-35 kv These Specifications cover single
More informationMGO INSULATED THERMOCOUPLES INDEX
MGO INSULATED THERMOCOUPLES INDEX PAGE General Information... M1 Part Numbering Examples... M4 Thermocouple Elements (MA)... M5 Leadwire Style Thermocouples (MB)... M6 Leadwire Style Thermocouples (MD,
More informationUnit Price Labor. INSTALL 138KV DISCONNECT SWITCH WITH MOTOR OPERATOR AND AUXILIARY SWITCHES ON EXISTING STRUCTURE 1 ea.
SUBSTATION B UPGRADE CONSTRUCTION MAJOR MATERIAL NOTES: Contractor to fill in line item column "Est. Qty." for items left blank. Construction Unit No. Description Est. Qty. Unit Labor 100 INSTALL 138KV
More information04.00 GENERAL SECONDARIES & SERVICES SECONDARY AND SERVICE CABLE SPLICES INSULATED SERVICE ENTRANCE COMPRESSION CONNECTORS 04.
4. GENERAL SECONDARIES & SERVICES 4.- TIE COLOR CODING 4.-6 SECONDARY AND SERVICE CABLE SPLICES 4.- INSULATED SERVICE ENTRANCE COMPRESSION CONNECTORS 4.- 4. POLE ATTACHMENTS POLE ATTACHMENT DEVICES NEUTRAL
More informationE-Z-Ground Grounding Systems. Ground Wire Size. Water Pipe Size. 1/2 in /4 in. 2 in /2 in. 3-1/2 in TB
Waterpipe Ground Clamps Cat. No. Ground Wire Size Water Pipe Size 2-TB 1/2 in., 3/4 in., 1 or rebar 4-10 3-TB 1-1/4 in., 1-1/2 in. or 2 in. #6, #4, 4 2-1/2 in., 3 in. or 3-1/2 in. #2 WG 5-TB 4 in., 4-1/2
More informationMechanical Connectors Product Overview
Product Overview......................... 40 Split-Bolt Connectors.................. 4-44 Service Post Connectors................ 4-46 Mechanical Service Entrance Connectors...... 4 Parallel Groove Connectors.............
More informationSECTION WIRE AND CABLE Raceways and Conduit Motor Power and Control Wiring.
SECTION 16120 WIRE AND CABLE PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 16112 - Raceways and Conduit. 2. 16155 - Motor Power and Control Wiring. 1.02 SYSTEM DESCRIPTION A. Performance Requirements:
More informationcolonial electric supply
colonial electric supply Features: Custom Cutting & Paralleling capabilities to meet your needs 3, 4 or 5 legs available Marked with sequential footage marks every 2 feet* Reduces costly mistakes and saves
More informationWill accommodate up to 35 conductors while maintaining separation required to withstand instrumentation voltages
H.0 ACCESSORIES Introduction Technical Reference Accessories Pressure Viewport Isolator Thermocouple Coaxial Multipin Connector Feedthrough Description Accessories is the product classification given by
More informationCompression Joints & Lugs
Compression Mid Span Joints - Full Tension for Hexagonal Compression s in accordance with AS54 AF L type AAC AAC Full Tension Midspan Joints, are manufactured from an Aluminium extrusion, equivalent in
More informationGENERAL USE VISE TYPE ALUMINUM SINGLE BOLT ALUMINUM TO ALUMINUM OR ALUMINUM TO COPPER
GENERAL USE VISE TYPE ALUMINUM SINGLE BOLT ALUMINUM TO ALUMINUM OR ALUMINUM TO COPPER ALUMINUM GA9000 Recommended for aluminum or aluminum to copper distribution, service or tap connections. Add Suffix
More informationSECTION INSULATED WIRE AND CABLE
SECTION 16120 INSULATED WIRE AND CABLE PART 1 GENERAL 1.01 DESCRIPTION A. This section covers the contract item Insulated Wire and Cable, which includes the following items with accessories, and appurtenances:
More informationSECTION GROUNDING AND BONDING FOR ELECTRONIC SAFETY AND SECURITY
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 28 05 26 GROUNDING AND BONDING FOR ELECTRONIC SAFETY AND SECURITY SPEC WRITER NOTE: Delete // // if not applicable to project. Also delete any other item or paragraph
More informationDESIGN GUIDELINES WIRING AND CONDUITS PAGE 1 of 7
DESIGN GUIDELINES WIRING AND CONDUITS PAGE 1 of 7 1.1. REFERENCE STANDARDS 1.1.1. Publications listed below (including amendments, addenda, revisions, supplements and errata) form a part of this specification
More information7Terminals and Splices
Introduction Product Facts No need f inhibit agents, thanks to our dry crimp technique Terminating/splicing capabilities f stranded aluminum wire, plus splicing of aluminum wire to copper wire conducts
More informationSECTION 4 - SECONDARY CONSTRUCTION OVERHEAD TABLE OF CONTENTS
4. GENERAL SECONDARIES & SERVICES 4.- INDIVIDUAL PHASE SECONDARY OVERHEAD LINE EXTENSIONS 4.- SECONDARY AND SERVICE CABLE SPLICES 4.- INSULATED SERVICE ENTRANCE COMPRESSION CONNECTORS 4.- 4. POLE ATTACHMENTS
More informationEvaluation of Aluminum Cable Presentation for IEEE OCS September 14, 2011 Breck Booker, Southwire
Evaluation of Aluminum Cable Presentation for IEEE OCS September 14, 2011 Breck Booker, Southwire Today s Topics Brief Overview of Southwire In-depth Discussion on Aluminum Characteristics Discussion of
More information3M Cold Shrink Silicone Rubber Connector Insulators 8440 Series
3M Cold Shrink Silicone Rubber Connector Insulators 8440 Series Data Sheet May 2014 Product Description 3M Cold Shrink Connector Insulators 8440 Series are open-ended, silicone rubber, tubular sleeves.
More informationTABLE OF CONTENTS. Type HFB-P1... A-22. Type HFB-N... A-23. Types KA-U, KKA-U... A-24. Type K2A-U... A-25. Types K3A-U, KK3A-U...
BURNDY Mechanical A-1 TABLE OF CONTENTS Types KS, KS-3 & SC... A-4 Type KSU............ A-5 Type KSA............ A-6 Types KVS, KVSU...... A-7 Types KVSW, KVS-A... A-8 Type QPX............ A-9 Type QPX-Y.........
More informationTitle: YALE OFFICE OF FACILITIES PROCEDURE MANUAL Chapter: 01 - Yale Design Standard Division: Electrical Standards
Change History Date Description of Change Pages / Sections Modified Change Approver Initials 6/15/16 Updated division section from 16124 to 2605 - mgl44 13, removed references to other section 10/17/14
More informationShrink-Kon Thin Wall Heat Shrinkable Tubing
Shrink Ratio 2:1 Shrink-Kon Thin Wall Tubing Styles 2:1 Shrink Ratio, Non-Lined Flame retardant. Resistant to common fluids and solvents. Meets UL 224, 125 C; CSA C22.2 No. 198.1, 125 C; MIL-DTL-23053/5
More information2/2 % ) Direct Acting Subminiature Solenoid Valves. 1/8" and 1/4" NPT. Features. Construction. Electrical
ANSI Accredited Program PRODUCT CERTIFICATION 4 Direct Acting Subminiature Solenoid Valves /8" and /4" NPT / 856 -WAY Features -way normally closed operation Compact design Brass and 6 stainless steel
More informationOTHER DISTRIBUTION ONE PIECE WILDLIFE PROTECTOR
OTHER STRIBUTION ONE PIECE WILDLIFE PROTECTOR Designed to provide protection for equipment bushing from accidental contact by squirrels, birds or other wildlife. Hinged construction for easy installation
More informationUnderground Residential Distribution (Specifications for Installation) PES March 2008 Spec 11
Underground Residential Distribution (Specifications for Installation) PES March 2008 Spec 11 Underground Residential Distribution (URD) Index General Discussion... 1-2 Description... 3-7 Drawings (Available
More informationTechnical Data. Excerpt from PRYSMIAN S WIRE AND CABLE ENGINEERING GUIDE
Excerpt from PYSMIAN S WIE AND CABLE ENGINEEING GUIDE Page 1 of 9 Areas and diameters of solid and concentric stranded conductors Conductor Size (AWG or kcmil) Area (cma) Solid Wire (mils) weight (lbs/1000
More informationThermocouples and Accessories Product Catalog
Thermocouples and Accessories Product Catalog 7282 N. Haggerty Rd. Canton, MI 48187 P. 734-451-8740 / F. 734-451-8741 www.inspec-inc.com 1 P a g e EXPERT CONTROL AND INSTRUMENTATION REPAIR Plastics Industry
More informationNORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017
SECTION 26 0526 - GROUNDING AND BONDING FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions
More informationConductor Shield A combination of semi-conducting tape and extruded thermosetting semi-conducting material meeting UL 1309, IEEE 1580 and UL1072.
37-105VFD MMV-VFD Power Cable Three : kv - 15kV 133% Level Rated 90 C s (3) Soft annealed flexible stranded tinned copper per IEEE 150 Table 11. Extruded thermosetting 90 C Ethylene Propylene Rubber (EPR),
More informationTECHNICAL ANALYSIS #2
TECHNICAL ANALYSIS #2 Problem Civista is wired using copper conductors only. Copper is an expensive material that is some opinions, offers the same performance from a much cheaper aluminum alloy alternative.
More informationTABLE OF CONTENTS. Throughout the catalog you will notice blue highlighted items. These are the most frequently ordered BURNDY Products.
H W U J B L T Substation Bolted TABLE OF CONTENTS COPPER SUBSTATION Introduction............... L-3 Type HFBW Bar Clamp............... L-13 Type NT Tube to Tube.............. L-4 Type HFB-P1 Bar Clamp...............
More informationSECTION SUBSTATION BUS ASSEMBLIES ERGLE SUBSTATION
SECTION 16-372 SUBSTATION BUS ASSEMBLIES ERGLE SUBSTATION 1. GENERAL SPECIFICATIONS The work of this Section includes furnishing all labor, equipment, materials (unless specifically identified as Owner-furnished)
More informationthermoweld The Contractors Choice GREAT PRODUCTS GREAT SERVICE GREAT PEOPLE
The Contractors Choice the Contractors Choice Founded in 1958, with locations in Tulsa and Broken Arrow, Oklahoma. is part of the Quality Brands of Continental Industries. TABLE OF CONTENTS THE PROCESS...4
More informationCrimping Type Copper Tubular Cable Terminal Ends - Bell Mouth Bell Mouth Terminal ends / Bell Mouth Cable Lugs
Crimping Type Copper Tubular Cable Terminal Ends - Bell Mouth Bell Mouth Terminal ends / Bell Mouth Cable Lugs We manufacture and export Crimping Type Copper Tubular Cable Terminal Ends - Bell Mouth. Our
More informationPOWERTECH LABS INC. CONNECTABILITY TESTING OF COPPER AND ALUMINUM WIRING, PHASE 2: Current Cycling Tests Mechanical Connectors PROJECT PL-00236
Management System Registered to ISO 9001/14001 12388-88 th Avenue Tel: (604)590-7500 Surrey, British Columbia Fax: (604)590-5347 Canada V3W 7R7 www.powertechlabs.com POWERTECH LABS INC. CONNECTABILITY
More informationMechanical Connectors Product Overview
Product Overview......................... 40 Split-Bolt Connectors.................. 4-44 Service Post Connectors................ 4-46 Mechanical Service Entrance Connectors...... 4 Parallel Groove Connectors.............
More informationSingle core conductor BETAtherm 145
Internet: www.synflex.de Single core conductor BETAtherm 145 Description BETAtherm 145 is a flexible low-voltage cable with UL recognition consisting of a tinned copper stranded wire and insulated with
More informationDISTRIBUTION TRANSFORMER SPECIFICATION #
DISTRIBUTION TRANSFORMER SPECIFICATION #1212.03 15kV Single Phase Submersible Transformer Stainless Steel 12/2/2011 Page 1 of 8 1. SCOPE This specification covers single-phase submersible transformers
More informationTitle: YALE OFFICE OF FACILITIES PROCEDURE MANUAL Chapter: 01 - Yale Design Standard Division: Electrical Standards
Date Description of Change Pages / Sections Modified ID 6/15/16 Updated format, division title, and removed references to other sections. - mgl44 A. Summary This section contains design criteria for the
More informationHeat-Shrinkable Tubing
CPO 2:1 Shrink Ratio Thin-Wall Tubing, Non-Lined Flame-retardant, cross-linked polyolefin Continuous operating temperature: -55 C to 135 C Shrink temperature of 120 C Meets UL and CSA standards; MIL-DTL-23053/5
More informationA veteran-owned company
GALVAN Electrical Products Catalog galvanelectrical.com A veteran-owned company TAbLE of CoNTENTS by Product Category Ground Rods.................................... 6-9 Ground Plates & Ground Rod Driver...................
More informationSection ARMORED MEDIUM VOLTAGE CABLES SHIELDED 3 CONDUCTOR POWER CABLE - INTERLOCKED ARMOR
PART 1 - GENERAL Section 26 05 15 SHIELDED 3 CONDUCTOR POWER CABLE - INTERLOCKED ARMOR 1.1 Cable shall be 15 kv, shielded, three conductor with ground, stranded copper, with continuously welded and corrugated
More informationW W W. C R I M P S U P P LY. C O M
WWW.CRIMPSUPPLY.COM Index Terminals Terminals Butt Splices Ring Terminals Fork Terminals Hook Terminals Quick Disconnects Bullet Terminals Wire Connectors Quick Splices Terminal Kits Ferrules & Ferrule
More informationPILC Replacement: Getting the Lead Out
PILC Replacement: Getting the Lead Out Spring Cincinnati, OH April 30, 2003 Page 1 PILC IS GREAT! Low Profile High Fault Current Capability on Shield High Degree of Water Blocking So why shouldn t you
More informationACT. Summary. 1 Introduction. 2 Synoptic. 3 Technical characteristics. 4 Part-numbering system. 5 Arrangements. 6 Receptacles. 7 Plug / Panel seal
Summary 1 Introduction 2 Synoptic 3 Technical characteristics 4 Part-numbering system 5 Arrangements 6 Receptacles 7 Plug / Panel seal 8 Mating and unmating dimensions 9 Mounting cutouts 10-11 Contacts
More informationCopper and Copper Alloy Tube, Pipe and Fittings COPPER and COPPER ALLOY TUBE and PIPE Seamless Copper Pipe: Copper pipe is almost pure copper manufactured to the requirements of ASTM B 42 - Standard Specification
More informationCOPPER CABLES AND CONNECTORS (PTY) LTD.
CopperCables&Connectors(Pty)Ltd, established in 1990, specialises in design and manufacture or repair of Water-Cooled Furnace Cables, Air- Cooled Furnace Cables, Water-Cooled Resistance Welding Cables,
More information15 kv EPR Insulated, Jacketed, URD Cable
15 kv EPR Insulated, Jacketed, URD Cable 1000 kcm Copper Conductor with Tape Shield Page 1 of 11 Table Of Contents 1 GENERAL... 3 2 STANDARDS... 3 3 APPROVED CABLE MANUFACTURERS... 3 4 REEL SPECIFICATIONS...
More informationINDUSTRIAL TEMPERATURE SENSORS
Temperature s INDUSTRIAL TEMPERATURE SENSORS Temperature s APPLIED SENSOR TECHNOLOGIES A DIVISION OF UNITED ELECTRIC CONTROLS T E M P S E N S O R - B - 0 2 Temperature s Temperature s index Subject Page
More informationTHERMOCOUPLES and THERMORESISTANCES - Temperature measurement sensors for industrial use Figure 1: Standard Thermocouples
THERMOCOUPLES and THERMORESISTANCES - Temperature measurement sensors for industrial use Figure 1: Standard Thermocouples Figure 2: Mineral Oxide Thermocouples Figure 3: Thermoresistances GENERAL CHARACTERISTICS
More informationA. All materials shall be tested and listed by an OSHA approved Nationally Recognized Testing Laboratory (NRTL).
16450 GROUNDING ************************************************************************************************************* SPECIFIER: CSI MasterFormat 2004 number: 26 05 26 An optional keynote to the
More informationCONSTRUCTION SPECIFICATION FOR INSTALLATION OF CABLE
ONTARIO PROVINCIAL STANDARD SPECIFICATION OPSS.PROV 604 NOVEMBER 2017 CONSTRUCTION SPECIFICATION FOR INSTALLATION OF CABLE TABLE OF CONTENTS 604.01 SCOPE 604.02 REFERENCES 604.03 DEFINITIONS - Not Used
More information4CS12 4CS-1/2 4X1-7/8D Handybox. Features. Dimensions and Weight. Long Description. Catalog Number
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 AllenWatson@elliottelectric.com 4CS12 4CS-1/2 4X1-7/8D Handybox Appleton/Oz Gedney Catalog Number 4CS12 Manufacturer Appleton/Oz
More information600 VOLT 600V, 3 CONDUCTOR (WITH GROUND), FR-EPR OR FR-XLPE INSULATION, PVC JACKET SPECIFICATIONS (FLAME RETARDANT POWER CABLE) (UL TYPE TC-ER) TYPE C3 SPEC 70.0100 PROJECT 196116 REFERENCE: LATEST EDITIONS
More informationENGINEERING COMMITTEE Interface Practices Subcommittee AMERICAN NATIONAL STANDARD. ANSI/SCTE (Formerly IPS SP 100)
ENGINEERING COMMITTEE Interface Practices Subcommittee AMERICAN NATIONAL STANDARD ANSI/SCTE 15 2006 (Formerly IPS SP 100) Specification for Trunk, Feeder and Distribution Coaxial Cable NOTICE The Society
More informationCannon Trident Connector System
These are low installed cost connectors rated for up to 13 A and 250 V ac. They are typically used for circuit board and internal wiring applications. Snap Together connectors facilitate easy assembly
More informationBUSWAY LOW VOLTAGE (POW-R-WAY III) SECTION SECTION 16466
BUSWAY LOW VOLTAGE (POW-R-WAY III) PART 1 GENERAL 1.01 1.02 SCOPE The Contractor shall furnish and install the busway system including all necessary fittings, hangers and accessories as specified herein
More informationUNIFIED FACILITIES GUIDE SPECIFICATIONS
USACE / NAVFAC / AFCEC / NASA UFGS-26 05 19.10 10 (May 2016) ----------------------------------- Preparing Activity: USACE Superseding UFGS-26 05 19.00 10 (November 2008) UNIFIED FACILITIES GUIDE SPECIFICATIONS
More informationIEEE 1580 Type P MOR Polyrad XT-125 Multi Conductor
TABLE OF CONTENTS SECTION SUBJECT PAGE I. SCOPE...1 II. APPLICABLE DOCUMENTS...1 III. CONDUCTOR...2 IV. SEPARATOR...2 V. INSULATION...2 A. Physical Properties...2 B. Electrical Properties...3 C. Qualification
More informationCONSOLIDATED EDISON COMPANY OF NEW YORK, INC Van Dam Street Long Island City, NY ELECTRIC METER SHOP DEPARTMENT
CONSOLIDATED EDISON COMPANY OF NEW YORK, INC. 48-05 Van Dam Street Long Island City, NY 11101 ELECTRIC METER SHOP DEPARTMENT METER ENGINEERING SPECIFICATION MES-350 REVISION 3 June 2016 EFFECTIVE DATE
More informationTABLE OF CONTENTS BURNDY. Overhead Distribution TAP CONNECTORS H-3 - H-20 H-21 - H-40 H-41 - H-43
BURNDY Overhead Distribution TABLE OF CONTENTS TAP CONNECTORS Mechanical (Bolted) Compression Transformer and Equipment H-3 - H-20 H-21 - H-40 H-41 - H-43 COMPRESSION SPLICES Service Entrance Neutral Jumper
More informationA. Product Data shall be provided for each type of product indicated.
32 31 13 CHAIN LINK FENCES AND GATES SECTION 1 GENERAL 1.1 SUMMARY This Section includes the following: 1. Chain Link Fences 2. Gates for Chain Link Fences. See electrical specifications for electrical
More informationTABLE OF CONTENTS. Type YGHR-C... E-14 Type GAR... E-28 - E-29. Blue highlighted items are industry standard and most frequently ordered.
BURNDY Grounding TABLE OF CONTENTS HYGROUND IRREVERSIBLE COMPRESSION GROUNDING AND INSTALLATION TOOLING HYGROUND Features and Benefits......... E-5 - E-6 Type YGIB.......... E-20 - E-21 Type YGL-C................
More informationQualification Reference: AA/ Cage Code: MIL-C Cables NEMA WC27500 Part Number Builder
Qualification Reference: 15404201.AA/1-20-2015 Cage Code: 67050 MIL-C-27500 Cables NEMA WC27500 Part Number Builder MIL-C-27500 Cables NEMA WC 27500 Part Number Builder MIL-C-27500 (M27500 Cable) MIL Spec
More informationEffective June, Eaton-Durham Model # UTRS223ACH. Siemens, Model # SUAS877-PG. (or Landis & Gyr # UAS877-PG) Milbank. Model # U1980-O.
Siemens, Model # SUAS877-PG (or Landis & Gyr # UAS877-PG) Eaton-Durham Model # UTRS223ACH Milbank Midwest Model # U980-O UTRS223AMEP These are some examples of the single meter sockets we require for underground
More informationD-1 FIRE PROTECTION PRODUCTS TAPPING VALVE. MUELLER Tapping Valves. MUELLER Tapping Sleeves and Crosses. MUELLER Stainless Steel Tapping Sleeves
TAPPING VALVE MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including cast iron, ductile iron, A-C, and cast iron O.D. PVC--Also outlet sealed
More informationMIL-W wire. Construction characteristics MIL-W wires. MIL-W part numbering and example
MIL-W-16878 wire MIL-W-16878 (NEMA HP3, HP4) wires are general-purpose, medium and high-temperature hookup wires, with PTFE or FEP insulation. Each insulation type is available in thin, medium, or heavy
More informationMaterials Carbon Steel and Malleable Iron are used in the manufacture of concrete inserts. Stainless Steel and other materials are available.
Concrete inserts offered in this section are designed to provide a pre-set support point in concrete ceilings, walls, and floors. A range of inserts with varying design loads are available. Materials Carbon
More informationFAST-08 F.A.S.T. Foldable, Adjustable, Stackable, Tool-Less System
FAST-08 F.A.S.T. Foldable, Adjustable, Stackable, Tool-Less System Product Focus F.A.S.T. System can be installed independent of the floor system. Stackable to create multiple tiers. No tools required
More informationThis section applies to the design and installation relating to wire and cable systems and terminations. 16G Figure 1 16G Figure 2
Wire, Cable and Terminations Basis of Design This section applies to the design and installation relating to wire and cable systems and terminations. Design Criteria Medium Voltage Review and modify the
More informationCHAPTER 11 CONDUITS AND FITTINGS
CONDUITS AND FITTINGS CHAPTER 11 CONDUITS AND FITTINGS The standards and requirements for conduits and fittings used for traffic control signal and lighting systems are presented in this chapter. 11.1
More informationInstallation Instructions
Installation Instructions AquaSnap 010-055 Chilled Water Storage Tank 50/60 Hz Part No: -900---001; -900---009; -900---010 CONTENTS INTRODUCTION.................................. 1 SAFETY CONSIDERATIONS......................
More informationUna e mpre sa Vi akab l e GLOSSARY.
GLOSSARY www.centelsa.com.co CONDUCTORS Cu Copper conductors. CuSn Tinned copper conductor. ACDSR Rectangular soft bare copper wire. ACDSRP Paper insulated rectangular soft bare copper wire. ACDD Bare
More informationThermo-Mechanical Conductor & Dead-End Testing ACCC Drake
Introduction Thermo-Mechanical Conductor & Dead-End Testing ACCC Drake In early 2009, EPRI & EDF conducted a thermo-mechanical test on ACCC Drake size conductor and dead-ends at Kinectrics Lab. Based upon
More informationCustomer Owned Meter Enclosures for Self-Contained Watthour Meters
Revision No. 4 Page 1 of 15 SPECIFICATION Page 2 of 15 RECORD OF SPECIFICATION APPROVALS: This Specification is approved for the inclusion of subject products on the Florida Meter Group s Approved Metering
More informationSECTION CHAIN-LINK FENCES AND GATES 02821/1
SECTION 02821 - CHAIN-LINK FENCES AND GATES 02821/1 PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Chain-Link Fences: 2. Gates: horizontal slide or swing. 3. Fences installed where
More informationENGLISH Datasheet JIS Miniature Thermocouple Connector In-Line Plugs Types K, J, T, E, R/S & B (JIS Colour Code)
ENGLISH Datasheet JIS Miniature Thermocouple Connector In-Line Plugs Types K, J, T, E, R/S & B (JIS Colour Code) Range of miniature thermocouple connectors with flat pins to suit thermocouple type Ideal
More informationDatasheet RS Pro RS Series Axial Carbon Resistor 1kΩ ±5% 2W ppm/ C RS Stock No:
Datasheet RS Pro RS Series Axial Carbon Resistor 1kΩ ±5% 2W -500 +350ppm/ C RS Stock No: 707-8861 Product Details RS Pro axial carbon resistor with ±5% tolerance, provides 1 kω resistance and is power
More informationPRODUCT GUIDE. Connectivity with flexibility.
PRODUCT GUIDE Connectivity with flexibility www.smartdesks.com ADA COMPLIANT - U.L. TESTED AND LISTED 2011 STRONG PRODUCTS GROUP, LTD. Connectrac systems are protected by US Patent Nos. 6,844,493 and 6,566,598;
More informationMASTERSPEC TECHNICAL SPECIFICATIONS DIVISION 26 ELECTRICAL SECTION RACEWAY AND BOXES FOR ELECTRICAL SYSTEMS
SECTION 260533 - RACEWAY AND BOXES FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 SUMMARY A. This Section includes raceways, fittings, boxes, enclosures, and cabinets for electrical wiring. B. See Division
More informationUNDERGROUND SERVICES SECONDARY
Reference UNDERGROUND SERVICES SECONDARY Underground services secondary... U- 1 General requirements for underground service... U- 2 Name of parts for underground service... U- 3 Conduit layouts... U-
More informationTable of Contents. Mil-Interconnect, Inc. 1
Table of Contents Introduction 2 How To Choose a Thermocouple 3 Breakdown 6 Explanation of Terms 7 Selection Guide 8 Special Ordering Instructions 17 www.mil-interconnect.com Mil-Interconnect, Inc. 1 Efficiency
More informationCONDUITS AND FITTINGS
CONDUIT AND FITTINGS Rigid Steel Conduit 3801 Rigid PVC Conduit 3803 HDPE Conduit 3803 Flexible Non Metallic Liquid Tight Conduit Type LFNC-B 3804 PVC Coated Urethane Lined Galvanized Rigid Steel Conduit
More informationDISCONTINUED CFL. Specifications. Compact Floodlights revision 11/13/14 kl_cfl_spec.pdf. Fixture Options: Approvals: Job: Fixture Catalog number:
Catalog number: / / Electrical Module Finish See page 2 Specifications Dimensions Models 50 to 70 watt HID Medium Base Lamps 13 to 42 watt Compact Fluorescent 60 watt Incandescent 150 watt Halogen 27 LED
More information2 2.2mm Pitch, Wire-to-Wire Connectors for Small Spaces
2 2.2mm Pitch, Wire-to-Wire Connectors for Small Spaces DF62 Series / DF62W Series Features 1. The slim, sleek design and smooth contour combine to complete connections in tight spaces. These connectors
More informationA. All materials shall be listed by an OSHA approved Nationally Recognized Testing Laboratory (NRTL).
16120 WIRE AND CABLE ************************************************************************************************************* SPECIFIER: CSI MasterFormat 2004 number: 26 05 19 An optional keynote
More informationAL ADAB GENERAL TRADING L.L.C.
Conduit Fittings & Electrical Wiring Accessories Tel: +97-9955, Fax: +97-995, NICE DEAL ELECTICAL & TADING WLL P.O. Box : 70, Shop No., Building No. 7, Barwa Village, Doha, Qatar Tel: +97 77 / Fax: +97
More informationOVERHEAD SERVICES - RESIDENTIAL & GENERAL SERVICE. See Chapter 3, Section 3.01 for more information about point of entrance (POE).
6.01 GENERAL OVERHEAD SERVICES - RESIDENTIAL & GENERAL SERVICE See Chapter 3, Section 3.01 for more information about point of entrance (POE). In all cases, the customer installs, owns, and maintains the
More informationAn Insight into Design, Development & Testing of Insulation Piercing Connectors for LV Application
An Insight into Design, Development & Testing of Insulation Piercing Connectors for LV Application Introduction Designed for Indoor and outdoor applications Non-tension tap and splice applications Used
More informationLAMP POSTS + ACCESSORIES
LAMP POSTS + ACCESSORIES 6333 Etzel Avenue St. Louis, MO 63133 Phone 314-725-9800 Toll Free 800-325-7364 Fax 314-721-6333 www.interglobal-inc.com info@interglobal-inc.com MADE IN THE USA DIRECT BURIAL
More informationMetal Transitions HIGH TEMPERATURE
Metal Transitions High Temperature Thermal Solutions of Texas continues to meet the demands of technological advances by developing thermocouples using materials with unusually high performance characteristics
More informationCONSULTANT PROCEDURES & DESIGN GUIDELINES Electrical Manholes and Handholes UNIVERSITY OF MISSOURI
GENERAL: The scope of this document is to provide instruction for the installation of concrete electric manholes. DESIGN GUIDELINES: 1. Materials for Manhole 1.1. Cast-in-Place or Pre-Cast concrete may
More informationThe University of Texas at Austin September 30, 2011
SECTION 27 05 26 GROUNDING AND BONDING FOR COMMUNICATIONS PART 1 - GENERAL 1.1 SUMMARY A. This section governs the products and execution requirements relating to furnishing and installing grounding and
More informationNEC 2017 Code Changes Chapter 1 - General
NEC 2017 Code Changes Chapter 1 - General Changes from the 2014 code are highlighted in yellow. ARTICLE 110 - Requirements for Electrical Installations Part I. General 110.1 Scope. This article covers
More information