Index GROUNDING CONNECTORS. TYPE WB Ground Rod Clamps. TYPE G/SRC Ground Rod Clamps. Heavy-Duty Clamps. Standard-Duty Clamps (Universal)
|
|
- Shon Kennedy
- 5 years ago
- Views:
Transcription
1 TYPE B Ground Rod Clamps Heavy-Duty Clamps GROUNDING CONNECTORS R30117 For direct burial. For connecting ground wire to driven rod. Designed to maintain proper alignment between ground wire and rod. Cast of high-strength copper alloy for corrosion resistance. 368 Socket Fig. Hex Fig. Rod Dia. Inches Cond. AG Socket Inches Hex Inches B12S 2 B12H 1 1/ /2 B58S 2 B58H 1 5/8 1/ /2 B34S 2 B34H 1 3/4 1/ /2 Note: For tin plating add suffix - T. -1- Index TYPE G/SRC Ground Rod Clamps Standard-Duty Clamps (Universal) R30117 A dependable connector offered at a substantial savings Makes long-lasting, trouble-free connections. Made from high strength silicon bronze corrosion resistant copper alloy. Hardware is made from high strength corrosion resistant stainless steel or high strength corrosion resistant silicon bronze alloy. Designed to withstand torque of 300 inch pounds. 368 Fig. Rod Diameter Inches Cond. AG HexInches G5 1 1/2, 5/8, #4 rebar /2 *SRC 2 1/2, 5/8, 3/4 1/0-8 1/2 *SRC2 2 1/2, 5/8, 3/4 1/0-10 1/2 Note: For tin plating add suffix - T. * U isted for copper-clad ground rods.
2 TYPE BGC TRANSFORMER TANK GROUNDING CONNECTORS Recommended For Copper Ground Conductors Used for grounding connections on distribution transformer tanks. Made of high strength silicon bronze. Provided with standard 1/2-13 thread studs with a 9/16 bolt head. Conductor BGC-0/VC207 1/ A B A BGC-0 B TYPE TGC Transformer grounding connectors are cast of high-conductivity bronze. 1/2-13 stud fits all standard EEI-NEMA distribution transformers. One connector handles all conductors 8 through 2/0. TGC2 accommodates cable in either vertical or horizontal directions. Conductor AG H Dimensions - Inches TGC2 2/0 str -8 sol TGC TGC H Note: For tin plating add suffix T. For 1 threaded stud add suffix 1. For internal threaded stud add suffix R. -2-9/17
3 BRONZE DISTRIBUTION CONNECTOR TYPE CC Bronze Distribution Vise-Type Connectors Complies with all ANSI specifications. Streamlined design that presents a neat appearance and is easy to tape or cover connection. Umbrella electrolytic spacer bar provides three additional lines of contact between conductors and short low resistance current path. Flat ribs on the back of the connector permit a secure grip for hot stick insulation. Conductor A B C Max. Min. Approx. Dimesions - Inches Bolt Size Head (Hex) CC8010 1/0-1 8 sol B C A -3-
4 DUA RATED AUMINUM GROUND CAMP TYPE GC Aluminum Ground Clamps DUA RATED FOR BOTH COPPER AND AUMINUM CONDUCTORS R CMC dual rated aluminum ground clamps are manufactured from high strength 6061-T6 aluminum alloy to ensure both maximum strength and conductivity. Electro tin plated to provide low contact resistance and protection from corrosion. They also cover a range from 1/2 to 4 pipe with a ground wire range covering 250 kcmil to #14 AG. Effectively ground copper or aluminum conductors to copper pipe, galvanized pipe, or steel conduit. Fig. Conduit, Pipe, or ater Tube Size Rebar Size Ground ire Screw Type Dimensions Inches Socket Size GC-15A 2 1/2-3/4-1 #4, #5, #6 1/0-14 Slotted GC-18A 1 1 1/4-1 1/ Hex Socket /16 GC-22A 1 2 1/ / Hex Socket /16 GC-15A GC-18A GC-22A -4-
5 SODERESS CONNECTORS TYPE A DUA-RATED CONNECTORS FOR AUMINUM OR COPPER CONDUCTORS isted ire Connector R30117 CMC -shaped, single hole, solderless connectors are manufactured from high strength 6061-T6 aluminum alloy to ensure both maximum strength and conductivity. Electro tin plated to provide low contact resistance and protection against corrosion. Assembly can be made with only a screwdriver or Allen wrench and the connectors are reusable. 368 Fig. Cond. AG Stud Size H Dimensions - Inches A-6M A-2M A-1/0M 1 1/ A-2/0M 1 2/ A-250M A-300M A-350M A-500M A-600M A-800M A-1000M
6 TO-CONDUCTOR SODERESS UGS TYPE DA/2M2/2D2 DUA-RATED CONNECTORS FOR AUMINUM OR COPPER CONDUCTORS Manufactured from high strength 6061-T6 aluminum alloy to ensure both maximum strength and conductivity. Assembly can be made with only a screwdriver or Allen wrench. Connectors are reusable. Electro tin plated to provide low contact resistance. Figure DA DA DA DA DA DA DA M D D D D Cond. Stud Size H AG Inches Dimensions - Inches MM MM Dimensions - (mm) 1/0-14(2) (2) /0-14(2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2).50(2) (2) 12.70(2) (2).50(2) (2) 12.70(2) (2).50(2) (2) 12.70(2) (2).50(2) (2) 12.70(2) (2).50(2) (2) 12.70(2) H R30117 Fig Material: Aluminum -6-
7 TYPE 3M2/3D2/3M4/3D4 DUA-RATED CONNECTORS FOR AUMINUM OR COPPER CONDUCTORS Manufactured from high strength 6061-T6 aluminum alloy to ensure both maximum strength and conductivity. Assembly can be made with only a screwdriver or Allen wrench. Connectors are reusable. Figure 3M2-1/0 1 THREE-CONDUCTOR SODERESS UGS Cond. * Stud Size H AG Inches Dimensions - Inches MM MM Dimensions - (mm) 1/ (2) (2) R Material: Aluminum 3M2-3/0 1 3/0-6.50(2) (2) M (2) (2) H 2M (2) (2) M (2) (2) D (2) (2) D (2) (2) D (2) (2) M4-1/0 3 1/ (4) (4) M4-3/0 3 3/0-6.50(4) (4) M (4) (4) Fig. 3 3M (4) (4) M (4) (4) D (4) (4) D (4) Fig (4) D Note: *This dimension can be altered per customer requirements. -7-
8 SINGE-HOE SODERESS UGS TYPE 1M2/1D2 DUA-RATED CONNECTORS FOR AUMINUM OR COPPER CONDUCTORS R30117 Manufactured from high strength 6061-T6 aluminum alloy to ensure both maximum strength and conductivity. Material: Aluminum Assembly can be made with only a screwdriver or Allen wrench. Connectors are reusable. Electro tin plated to provide low contact resistance and protection against corrosion. Figure 1M M D D D Note: *This dimension can be altered per customer requirements. Cond. *Stud Size H AG Inches Dimensions - Inches MM2 MM Dimensions - (mm) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2)
9 PANEBOARD SODERESS UGS TYPE PV DUA-RATED CONNECTORS FOR AUMINUM OR COPPER CONDUCTORS R Manufactured from high strength 6061-T6 aluminum alloy to insure both maximum strength and conductivity. Assembly can be made with only a screwdriver or Allen wrench. Material: Aluminum Connectors are reusable. Electro tin plated to provide low contact resistance and protection against corrosion. Figure PV PV PV PV PV PV PV PV PV PV Cond. AG Stud Size H Dimension - Inches MM2 MM Dimensions - (mm) 300-6(2) (2) (2).38(2) (2) 9.65(2) (2).38(2) (2) 9.65(2) /0(2).38(2) (2) 9.65(2) (3).38(2) (3) 9.65(2) (3).38(2) (3) 9.65(2) /0(3).38(2) (3) 9.65(2) (4).38(2) (4) 9.65(2) (4).38(2) (4) 9.65(2) /0(4).38(2) (4) 9.65(2) Fig. 3 H -9-
10 PANEBOARD UGS TYPE ABV DUA-RATED CONNECTORS FOR AUMINUM OR COPPER CONDUCTORS R Posigrip The unique ridges formed on the bottom of the contact surface are designed to provide contact points for an electrically secure joint of the lowest resistance for current flow. The screws used to clamp the conductor are designed to extend beyond the barrel sides of the conductor to allow a better, more secure compression of the conductor. This design spreads the conductor strands to help dissipate heat and improve its pull-out safety features and capabilities. The design of the wire way provides optimum transfer of current creating a straight line flow through the connector for the least possible path of electrical resistance. In addition, a positive wire stop is provided. For installation,cmc recommends the use of an insulated Allen wrench. Electro tin plated to provide low contact resistance and protection against corrosion. PATENTED Figure Cond. AG MM2 H D Dimensions - Inches Dimensions - (mm) H 2ABV ABV ABV / ABV ABV ABV / ABV ABV ABV / Fig
11 GENERA PURPOSE TRANSFORMERS CONNECTORS TYPE ABV General Purpose Transformer Connectors DUA-RATED CONNECTORS FOR AUMINUM OR COPPER CONDUCTORS Compact design relieves cantilever stress. Clear Plated for low contact resistance. Fully tested to ANSI C119.4 for Class A connectors. Designed for installation on standard NEMA bolt holes. Fabricated from 6061-T6 aluminum alloy for conductivity and strength. Supplied with radial tipped set-screws. Material: Aluminum PATENTED Figure of Cond. Cond. AG - kcmil of Mounting Holes H 6ABV ABV / ABV / Designed for installation on standard NEMA bolt holes H
12 TYPE GPT DUA-RATED CONNECTORS FOR AUMINUM OR COPPER CONDUCTORS AUMINUM PARAE AND TEE-TAPPED CONNECTORS Supplied with tin-plated radial-tipped set-screws and tin plated for low contact resistance. Connector fabricated from 6061-T6 aluminum alloy for conductivity and strength. CMC recommends the use of an insulated Allen wrench. Parallel and Tee Tap ire H Main Tap Dimensions - Inches MM2 MM2 Dimensions - (mm) GPT-2 GPT-1/0 GPT GPT-250 GPT-350 GPT-500 GPT-750 GPT-750-A TC-2 TC-1/0 TC-250 TC-350 TC-500 TC /0-2 1/ /0 1/ / / Covers Only H Dimensions - Inches Dimensions - (mm) Cover Color Use ith Connector GPT-2 Yellow GP GPT-1/0 Grey GP-1/ GPT-250 Red GP GPT-350 Yellow GP GPT-500 Blue GP GPT-750 Orange GP-750 Note: --To order the connector and cover together add suffix C --Add suffix I to order with co-ox oxide inhibitor. H -12-7/14
13 TYPE P In Span Phase Connectors INSUATED PHASE INE CONNECTORS DUA-RATED CONNECTORS FOR AUMINUM OR COPPER CONDUCTORS Designed for use on open wire or multiple cable secondaries to permit readily accessible service connections. The connector is constructed of high quality 6061-T6 for strength and conductivity. Takes up to four taps. Taps may be added later without interrupting service or removing cover. Impact resistant cover and clamp are clearly marked with easy-to-read cable ranges. Extended insulating shields on the cover make cable stripping much easier. Conductor Conductor H Main A - CU Taps A - CU Dimensions - Inches P MCM - 2 4/0-14 or 1/0 ACSR PC-250 Cover Note: --To order the connector and cover together add suffix C --Add suffix I to order with co-ox oxide inhibitor. TYPE APC Insulating Cover Polyethylene (UV stabilized). Eliminates taping. COVER 1 Cover 1 Fits APC 1/0 & APC 2/0 Cover 400 Fits APC 397 &n APC 4/0 Refer to pages G-14 for APC connectors. -13-
14 TYPE APC/APR DUA-RATED CONNECTORS FOR AUMINUM OR COPPER CONDUCTORS AUMINUM PARAE CAMPS (EXTRUDED) Pre-filled with CO-OX oxide inhibitor. Furnished with high-stress anodized bolts with integrated washers. Heavy-duty distribution connectors suitable for use over armor rod. D D Fig. 3 D Figure APC-1/0I 1 Conductor D Inches Inches Dimensions - Inches Main A Tap B Bolt Size MM2 MM2 Dimensions - (mm) 6 sol - 1/0 str..17 /.40 6 sol - 1/0 str.17 / /0 ACSR 4.11 / /0 ACSR 4.00 / /8 6 sol - 2/0 str..17 /.45 6 sol - 2/0 str.17 / APC-2/0I 1 6-2/0 ACSR 6-2/0 ACSR 3/8 6 str AR 4.11 / str AR 4.11 / sol - 4/0 str.25 /.56 2 sol - 4/0 str.25 / APC-4/0I 1 4-4/0 ACSR 4-4/0 ACSR 3/8 6-4 str. AR 6.35 / /0 str. Ar 6.35 / sol - 4/0 str.25 /.56 2 sol - 4/0 str.25 / APC-4/0-2I 2 4-4/0 ACSR 4-4/0 ACSR 3/8 6-4 str AR 6.35 / str AR 6.35 / /0 str MCM.47 /.78 6 sol - 3/0 str.18 / APR-397I 1 3/ ACSR 6-3/0 ACSR 1/2 4 str - 2/0 str AR / str AR 4.62 / /0 str MCM.47 /.78 3/0 str MCM.47 / APC-397-2I 2 3/0 str ACSR 3/0 str ACSR 1/2 4 str - 2/0 str AR / str - 2/0 str AR / /0 str MCM.47 /.78 3/0 str MCM.47 / APC-397-3I 3 3/ ACSR 3/ ACSR 1/2 4 str - 2/0 str AR / str str AR / MCM.73 / sol - 2/0 str.47 / APR-1000I ACSR 6 sol - 2/0 ACSR 5/8 3/0 str AR / str AR / MCM.73 / /0-400 MCM.47 / APR I ACSR 3/ ACSR 5/8 3/0 str AR / str - 2/0 str AR / MCM.73 / MCM.73 / APC I ACSR ACSR 5/8 3/0 str AR / /0 str AR / Note: For omission of CO-OX oxide inhibitor delete suffix - I. -14-
15 TYPE VC BRONZE DISTRIBUTION CONNECTOR Complies with all ANSI specifications and provides a vibration-proof connection. One-piece design eliminates loose parts and danger of cross threading. V grooves assure perfect alignment of conductors and provide self-cleaning during installation. The long thread engagement provides strength, ease of covering and protection from the elements for removal and reuse. High pressure between conductors at low torque assures a strong mechanical joint and high electrically conductive contacts. Easy installation with gloves or hot sticks. Overlapping wide range and complete selection for all conductors, permits smaller inventory. The broad base permits assembly on structures or pads as a ground connector for cable flat applications. Conductor A B C ire Diameter Max Min - Inches Approx. Dimensions - Inches Bolt Head VC-6 VC-6SH* #6 Sol. #11 Sol /8 VC-4 #4 Sol. #8 Sol /8 VC-2 #2 Sol. #6 Sol /16 VC-2S #2 Sol. #5 Sol /16 VC-20 #1/0 Sol. #4 Sol /16 VC-20S #2/0 Sol. #3 Sol /16 VC-40 #4/0 Sol. #1 Sol /16 Note: *SH - Slotted Head. Add suffix TP for tin plating. -15-
General Terms and Conditions
General Terms and Conditions MINIMUM ORDER CARGE PER ITEM $200.00 PRICES All prices are subject to change without notice and orders will be billed at prices in effect at the time of shipment. TRANSPORTATION
More informationREA LISTED. Throughout the catalog you will notice blue highlighted items. These are the most frequently ordered BURNDY Products.
Grounding BURNDY Products E-44 TYPE GRC HIGH STRENGTH GROUND ROD CLAMP For Copper Cable to Rod High copper alloy ground connector for joining a range of cable to copper clad, galvanized steel, and stainless
More informationTable of Contents. Connector Manufacturing Co. US Page 1
Table of Contents 2AB2 15 2AB 15 2ABV 20 2BC 39 3AB2 17 3AB4 17 3ABV 20 4ABV 20 6ABV 20 A A1B2 13 A2B2 16 A3B2 18 A4B4 19 AB-50-S 11 AB-70-S 11 AB-112-R 12 AB-112S 11 AB-125-R 12 AB-125S 11 AB-250S 11
More informationPhone: Fax:
SEPTEMBER 2007 www.nsiindustries.com Phone: 800.321.5847 Fax: 800.841.5566 Mechanical Connectors Dual Rated Single & Double Lugs........................ 1 Panelboard Lugs............................ 1
More informationF4P lay-in lugs SERIES SPECIFICATION
F4P lay-in lugs SERIES SPECIFICATION Lay-in lugs are ideal for both grounding and continuous loop applications. Made of aluminum alloy and tin plated for low contact resistance, they are suitable for use
More informationMechanical Connectors Product Overview
Product Overview......................... 40 Split-Bolt Connectors.................. 4-44 Service Post Connectors................ 4-46 Mechanical Service Entrance Connectors...... 4 Parallel Groove Connectors.............
More informationGROUNDING. Ground-Lok CLAMP SYSTEM SERRATED HEAD - (COMPONENTS)
PAGE 70 GREAVES EXCLUSIVE Ground-Lok CLAMP SYSTEM SERRATED HEAD - (COMPONENTS) BRONZE WATER PIPE CLAMPS Interchangeable clamps and adapters provide versatility Matching serrations assure positive lock
More informationE-Z-Ground Grounding Systems. Ground Wire Size. Water Pipe Size. 1/2 in /4 in. 2 in /2 in. 3-1/2 in TB
Waterpipe Ground Clamps Cat. No. Ground Wire Size Water Pipe Size 2-TB 1/2 in., 3/4 in., 1 or rebar 4-10 3-TB 1-1/4 in., 1-1/2 in. or 2 in. #6, #4, 4 2-1/2 in., 3 in. or 3-1/2 in. #2 WG 5-TB 4 in., 4-1/2
More informationA veteran-owned company
GALVAN Electrical Products Catalog galvanelectrical.com A veteran-owned company TAbLE of CoNTENTS by Product Category Ground Rods.................................... 6-9 Ground Plates & Ground Rod Driver...................
More informationMechanical Connectors Product Overview
Product Overview......................... 40 Split-Bolt Connectors.................. 4-44 Service Post Connectors................ 4-46 Mechanical Service Entrance Connectors...... 4 Parallel Groove Connectors.............
More informationQTY 7/374 8/346 11/375 12/348 17/298 18/324 19/ / /472 24/473 3 QTY
PAGE 20 BUTT SPLICES - COPPER Produced from high conductivity seamless copper tubing Marked with die index and color coded Tin plated to provide corrosion resistance SC SERIES Standard Barrel 5808 SC 8
More informationUTILITY PRODUCTS. E f f e c t i v e A P R I L 1,
UTIITY PRODUCTS E f f e c t i v e A P R I 1, 2 0 0 6 Transformer ugs................................................................2 Heavy Duty Transformer ugs.......................................................3
More informationGENERAL USE VISE TYPE ALUMINUM SINGLE BOLT ALUMINUM TO ALUMINUM OR ALUMINUM TO COPPER
GENERAL USE VISE TYPE ALUMINUM SINGLE BOLT ALUMINUM TO ALUMINUM OR ALUMINUM TO COPPER ALUMINUM GA9000 Recommended for aluminum or aluminum to copper distribution, service or tap connections. Add Suffix
More informationMechanical Connectors
Table of Contents Split-Bolt Connectors...A2A4 Parallel Groove Connectors...A5A7 Insulation Piercing Connectors... A8 Two-Bolt Connectors... A9A10 AMT Connectors... A11A13 ual-rated Mechanical Connectors...
More informationDESIGN GUIDELINES WIRING AND CONDUITS PAGE 1 of 7
DESIGN GUIDELINES WIRING AND CONDUITS PAGE 1 of 7 1.1. REFERENCE STANDARDS 1.1.1. Publications listed below (including amendments, addenda, revisions, supplements and errata) form a part of this specification
More informationNYULMC AMBULATORY CARE CENTER FIT-OUT PHASE 1 Perkins & Will Architects PC 222 E 41st ST, NYC Project: Issued for GMP March 15, 2017
SECTION 27 05 26 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
More informationANDERSON HUBBELL POWER SYSTEMS FARGO
REFERENCE DATA ALUMINUM AND BRONZE CONNECTORS...-1 RECOMMENDED TYPES OF HARDWARE AND INALLATION MOUNTING... - AMPACITY RATINGS, BOLTED PAD CONNECTIONS...-5 CATALOG NUMBER SUFFIXES FOR SPECIAL FEATURES...
More informationCompression Connectors
Table of Contents The Homac and lackburn brands by Thomas & etts provide compression connectors for wires ranging from # AWG to 500 kcmil. Choose from a vast array of dual-rated aluminum lugs, copper lugs,
More informationCompression Grounding Copper E Crimps
ELT Compression Grounding Copper E Crimps Manufactured from copper alloy Clearly marked with wire size and die index Range taking UL Listed and CSA Certified for grounding and bonding May be used in ground
More informationTOWER & ANTENNA Product Catalog
TOWER & ANTENNA Product Looking for Reliable Solutions to your Communications Network Needs? COMMUNICATIONS Product Fiber Optic, Copper, Demarcation, Bonding, Strand and Cable Solutions for the Communications
More informationNew Product Flyer Introduction
Dec. 5, 2013 New Product Flyer Introduction Preferred Lightning Protection, Inc. is excited to introduce our newest products and capabilities. Following are several new products with current inventories
More informationEssex County College - West Essex Campus Addition And Renovations dlb # / 11-14
SECTION 270526 - GROUNDING AND BONDING FOR COMMUNICATIONS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationTABLE OF CONTENTS. Type HFB-P1... A-22. Type HFB-N... A-23. Types KA-U, KKA-U... A-24. Type K2A-U... A-25. Types K3A-U, KK3A-U...
BURNDY Mechanical A-1 TABLE OF CONTENTS Types KS, KS-3 & SC... A-4 Type KSU............ A-5 Type KSA............ A-6 Types KVS, KVSU...... A-7 Types KVSW, KVS-A... A-8 Type QPX............ A-9 Type QPX-Y.........
More informationPART 4 ORANGE SECTION
PART 4 ORANGE SECTION BOLTED CONNECTORS BOLTED CONNECTORS 4-1 AERIAL CONNECTORS ALUMINIUM SERVICE TAP SL-4/12 SL-7/19 Conductor Range Run Diameter Tap Diameter 7/3.00 to 9mm to 7/1.75 to 7/4.75 14.3mm
More informationFig. 1 - Standard Clevis Hanger
Revision 10/24/2007 Fig. 1 - Standard Clevis Hanger Component of State of California OSHPD Approved Seismic Restraints System Size Range Size 1/2" thru 36" pipe. Function Recommended for the suspension
More informationA. Division 01: Administrative, procedural, and temporary work requirements apply to this section.
Copyright 2016 Metal Roof Innovations, Ltd. www.s-5.com SECTION 26 31 00.01 PHOTOVOLTAIC COLLECTOR ATTACHMENT SYSTEM PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Photovoltaic Collector Attachment
More informationBolted Connectors & Terminals
Disconnect Tee Connecr Type ADT5 75 Body 90 Nom. Function: ADT connecrs provide a convenient means of connecting lugged service conducrs overhead mains conducrs. Construction: Body - High strength cast
More informationElectrical Metallic Tubing (EMT) Fittings
Suggested Specifications for Electrical Metallic Tubing (EMT) Fittings Series 2 Insulated EMT Connector (Raintight) (Compression Type) Series 20 EMT Coupling (Raintight) (Compression Type) Series 0 Pipe
More informationSmall Terminals. TEST CURRENT (Amps) Fig 1. Tensile strength of YAD HYLUG after axial rotation stresses. TENSILE STRENGTH IN POUNDS
B-2 Performance The terminals and splices in this catalog are approved, per MIL-T-7928 and/or UL 486, where indicated. Table 1 shows the performance requirements for terminals used in military and commercial
More informationUNIVERSITY SERVICES ANNEX James Madison University Harrisonburg, Virginia State Project Code: Architect s Project Number:
SECTION 260526 - GROUNDING AND BONDING FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract apply to this Section. 1.2 SUMMARY A. This Section
More informationCHAPTER 13 GROUNDING AND BONDING
GROUNDING AND BONDING CHAPTER 13 GROUNDING AND BONDING Grounding and bonding must be in accordance with Article 250 of the National Electrical Code (NEC). Bonding is defined in the NEC as the permanent
More informationOVERHEAD SERVICES - SECONDARY
OVERHEAD SERVICES - SECONDARY Contents - Overhead Services... O-1 General Requirements for Overhead Service... O-2 Names of Parts for Overhead Service... O-3 Service Attachment on an Unguyed Service Mast...
More informationSECTION A. ASTM B3 - Standard Specification for Soft or Annealed Copper Wire; 2013.
PART 1 GENERAL 1.1 SECTION INCLUDES SECTION 26 0519 A. Single conductor building wire. B. Metal-clad cable. C. Wiring connectors. D. Electrical tape. E. Wire pulling lubricant. F. Cable ties. 1.2 RELATED
More informationMechanical. Mechanical
Connectors Quick Reference...C-6 Split-Bolt Connectors...C- C- Service Post Connectors...C-20 C-2 Parallel Groove Connectors...C-22 Insulated Conductor Connectors...C-2 Two-Bolt Connectors...C-24 C-2 MT
More informationTABLE OF CONTENTS. Throughout the catalog you will notice blue highlighted items. These are the most frequently ordered BURNDY Products.
H W U J B L T Substation Bolted TABLE OF CONTENTS COPPER SUBSTATION Introduction............... L-3 Type HFBW Bar Clamp............... L-13 Type NT Tube to Tube.............. L-4 Type HFB-P1 Bar Clamp...............
More informationNORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017
SECTION 26 0526 - GROUNDING AND BONDING FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions
More informationSuperstrut. Metal Framing. Pipe Straps, Pipe Clamps and Hangers
Design Loads Where design loads are indicated, they provide for a safety factor of 3 in conformance with the American Standard Code for Pressure Piping. Hanger Design Pipe hangers are of advanced design
More informationMaterials Carbon Steel is used in the manufacturing of riser and pipe clamps. Stainless Steel and other materials are available.
Pipe clamps offered in this section are designed for support and attachment of pipe to structural members. wide range of pipe clamps are available for various applications. Materials arbon Steel is used
More informationSECTION VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS
SECTION 260548 - VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 SUMMARY A. Section includes: 1. Isolation pads. 2. Spring isolators. 3. Restrained spring isolators. 4. Channel
More informationTEMPORARY PROTECTIVE GROUNDING EQUIPMENT
TEMPORARY PROTECTIVE GROUNDING EQUIPMENT TEMPORARY PROTECTIVE GROUNDING EQUIPMENT NOTE: When ordeing assemblies of grounding products, please make sure all items included in the assembly are only from
More informationthermoweld The Contractors Choice GREAT PRODUCTS GREAT SERVICE GREAT PEOPLE
The Contractors Choice the Contractors Choice Founded in 1958, with locations in Tulsa and Broken Arrow, Oklahoma. is part of the Quality Brands of Continental Industries. TABLE OF CONTENTS THE PROCESS...4
More informationSECTION GROUNDING AND BONDING FOR ELECTRICAL SYSTEMS
SECTION 26 05 26 - GROUNDING AND BONDING FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions
More informationUnit Price Labor. INSTALL 138KV DISCONNECT SWITCH WITH MOTOR OPERATOR AND AUXILIARY SWITCHES ON EXISTING STRUCTURE 1 ea.
SUBSTATION B UPGRADE CONSTRUCTION MAJOR MATERIAL NOTES: Contractor to fill in line item column "Est. Qty." for items left blank. Construction Unit No. Description Est. Qty. Unit Labor 100 INSTALL 138KV
More informationROAD CLOSURE GATE PLAN ESTIMATED QUANTITIES CONCRETE FOOTINGS FOR S. D. DEPT. OF TRANSPORTATION DECEMBER 1996 ELEVATION CABLE TIE DOWN FOOTING
ADMIN. S 1 1 13 199 POST Anchor Bolts (4 Required) 1 Pole Base Plate Footing PLAN POST Chamfer on Footing ESTIMATED QUANTITIES ITEM UNIT QUANTITY Footing & Eyebolt Class M5 Concrete CU.YD. 0.5 The quantity
More informationElectrical Metallic Tubing (EMT) Fittings
Suggested Specifications for Electrical Metallic Tubing (EMT) Fittings Series 2 Insulated EMT Connector (Raintight) (Compression Type) Series 20 EMT Coupling (Raintight) (Compression Type) Series 0 Pipe
More informationELECTRICAL SERVICE REQUIREMENTS FOR MOBILE HOME DEVELOPMENTS
Greenbook Prepared by: ABB1 ELECTRICAL SERVICE REQUIREMENTS FOR MOBILE HOME DEVELOPMENTS 052521 Asset Type: Electric Metering Function: Construction Issued by: Quoc Hoang (QxH1) Date: 08-15-17 Rev. #06:
More informationOverhead Connectors. Compression Splices
Aluminum Semi-Tension Neutral Compression Splices Common Die Series Aluminum construction provides high-conductivity Ease cable insertion Prevents oxidation and keeps out moisture SNG 02 4-1 4 in. A B
More informationSECTION ALUMINUM HANDRAIL SYSTEMS
SECTION 05520 ALUMINUM HANDRAIL SYSTEMS PART 1 - GENERAL 1.01 SUMMARY A. Section includes aluminum handrails and railings. B. Related Work: 1. Section 03300 - Cast-in-Place Concrete C. References: 1. American
More informationRE: City of Claremore, OK, BH Substation Bid #SB Addendum #1 and Clarifications ( )
January 28, 2013 TO ALL BIDDERS RE: City of Claremore, OK, BH Substation Bid #SB-2013-01 Addendum #1 and Clarifications (023515003) This letter is to provide Addendum #1 and Clarifications for the above
More informationSECTION SUBSTATION BUS ASSEMBLIES ERGLE SUBSTATION
SECTION 16-372 SUBSTATION BUS ASSEMBLIES ERGLE SUBSTATION 1. GENERAL SPECIFICATIONS The work of this Section includes furnishing all labor, equipment, materials (unless specifically identified as Owner-furnished)
More informationOTHER DISTRIBUTION ONE PIECE WILDLIFE PROTECTOR
OTHER STRIBUTION ONE PIECE WILDLIFE PROTECTOR Designed to provide protection for equipment bushing from accidental contact by squirrels, birds or other wildlife. Hinged construction for easy installation
More informationSECTION GROUNDING AND BONDING FOR ELECTRONIC SAFETY AND SECURITY
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 28 05 26 GROUNDING AND BONDING FOR ELECTRONIC SAFETY AND SECURITY SPEC WRITER NOTE: Delete // // if not applicable to project. Also delete any other item or paragraph
More informationSECTION HANGERS AND SUPPORTS FOR ELECTRICAL SYSTEMS
SECTION 26 05 29 HANGERS AND SUPPORTS FOR ELECTRICAL SYSTEMS PART 1 GENERAL 1.1 DESCRIPTION A. Scope: 1. CONTRACTOR shall provide all labor, materials, equipment, and incidentals as shown, specified, and
More informationA. Division 01: Administrative, procedural, and temporary work requirements apply to this section.
Copyright 2015 Metal Roof Innovations, Ltd. www.s-5.com SECTION 07 72 53 COLORGARD SNOW GUARDS PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Snow guards for metal roofs. 2. [Non-penetrating] [Face
More information3.2 SuperTie 50K Installation Guide
3.2 SuperTie 50K Installation Guide FORM ERECTION 1. This G50K Gripper has been shipped partially disassembled. It is necessary for you only to attach the base plate. The Gripper Body, Base Plate, and
More informationMeter Swivels Insulated Unions Meter Sets Meter Accessories The Right Connection 1-800-654-3872 1-405-273-6302 www.centralplastics.com : Overview Georg Fischer Central Plastics entered the meter connection
More information1. Hangers and supports for electrical equipment and systems.
PART 1 - GENERAL... 1 1.1 RELATED DOCUMENTS... 1 1.2 SUMMARY... 1 1.3 DEFINITIONS... 1 1.4 PERFORMANCE REQUIREMENTS... 1 1.5 SUBMITTALS... 2 1.6 QUALITY ASSURANCE... 2 1.7 COORDINATION... 2 PART 2 - PRODUCTS...
More informationMASTERSPEC - SHORT FORM. B. See Division 5 Section "Metal Stairs" for steel tube railings associated with metal stairs.
SECTION 05721 - ORNAMENTAL RAILINGS PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Glass supported railings. B. See Division 5 Section "Metal Stairs" for steel tube railings associated
More information1. Hangers and supports for electrical equipment and systems. 2. Construction requirements for concrete bases.
SECTION 260529 - HANGERS AND SUPPORTS PART 1 - GENERAL 1.1 SUMMARY A. Section includes: 1. Hangers and supports for electrical equipment and systems. 2. Construction requirements for concrete bases. 1.2
More informationThis product specification is written according to the Construction Specifications Institute MasterFormat, 2014 Update.
AFC Cable Systems, Inc. Product Specification This product specification is written according to the Construction Specifications Institute MasterFormat, 2014 Update. SECTION 260519.13 METAL CLAD CABLE-MC
More information12/21/2018 WHAT S NEW SINCE What's New Since SPEC BOOK 2018 SPEC BOOK 2018 SPEC BOOK WHAT S NEW SINCE 2014
CHAPTER 2 STANDARD SPECIFICATIONS AND SPECIAL PROVISIONS 2545.1B & 2565.1B QUALIFICATION OF WORKERS The provisions of 1802 are hereby supplemented with the following: Signal and Lighting Certification:
More informationSECTION GROUNDING AND BONDING
SECTION 16060 GROUNDING AND BONDING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
More informationSECTION [ ] COILING COUNTER DOORS. Display hidden notes to specifier. (Don't know how? Click Here)
SECTION 08332 [08 33 13] COILING COUNTER DOORS Display hidden notes to specifier. (Don't know how? Click Here) PART 1 GENERAL 1.1 SECTION INCLUDES A. Coiling Metal Counter Doors. B. Coiling Metal Counter
More informationExpansion & Deflection Fittings. SOLUTIONS for the Construction Industry
Expansion & Deflection Fittings SOLUTIONS for the Construction Industry TTINGS FI ST D LO C AF/AF8 SERIES e st d, in M a c h e d, As d in D e s i g n e d, b le the Casted Body with NPT hub size se m Ca
More informationPanelGrip Dry Glaze Glass Railing System
Metric Version PanelGrip Dry Glaze Glass Railing System Patent Pending Nationwide supplier of trims, mouldings and components for the glass and mirror industry. Reduces Labor Costs up to 80% Reduces Freight
More informationMSME Testing Centre, 65/1, G. S. T. Road, Guindy, Chennai, Tamil Nadu. Discipline Electrical Testing Issue Date
Last Amended on - Page 1 of 7 I. TRANSMISSION LINE EQUIPMENT & ACCESSORIES ]] 1 Stockbridge Vibration dampers for Power lines Examination & IS 9708:1993 Cl. 7.2 Cl. 7.3 Mass pull off (Slip) Cl. 7.6 120
More informationCONTENTS. B. System Design and Performance Requirements
16060 Grounding and Bonding This document provides design standards only, and is not intended for use, in whole or in part, as a specification. Do not copy this information verbatim in specifications or
More informationVERSAtile ALUMINUM COMPRESSION TERMINAL TYPE VCEL
VERSAtile UMINUM COMPRESSION TERMIN TYPE VCEL UMINUM VCEL For use with either VERSA-CRIMP or conventional compression tools For size-for-size replacements for original equipment set screw mechanical lugs,
More informationSECTION GROUNDING AND BONDING
SECTION 16060 PART 1 GENERAL 1.01 DESCRIPTION A. Section includes requirements for an electrical grounding system, including electrodes, grounding rods, connectors, insulators, equipment grounding and
More informationGroundTrac. Installation Manual
APPLICATION: The GroundTrac system is designed with a minimum amount of installed footings at greatly reduced labor. The system integrates with ordinary 1-1/2 schedule #40 galvanized water pipe. This ground
More informationSECTION VIBRATION CONTROLS FOR PLUMBING PIPING AND EQUIPMENT
Page 220548-1 SECTION 220548 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationSECTION GROUNDING AND BONDING FOR ELECTRICAL SYSTEMS
SECTION 26 05 26 GROUNDING AND BONDING FOR ELECTRICAL SYSTEMS PART 1 GENERAL 1.1 DESCRIPTION A. Scope: 1. CONTRACTOR shall provide labor, materials, equipment, and incidentals as shown, specified, and
More information*** Supercedes: BECO E and COM , , & ***
7/27/09 Page 1 of 9 R5 *** Supercedes: BECO E2.9-27.4 and COM 1-0696, 2-0196, & 5-0385 *** 1.0 Scope #2 AWG to 1000 KCMIL CONCENTRIC NEUTRAL JACKETED CABLES RATED 5-35 kv These Specifications cover single
More informationKaf-Tech Product Specification
Kaf-Tech Product Specification This product specification is written according to the Construction Specifications Institute MasterFormat, 2014 Update. SECTION 260519.13 METAL CLAD CABLE-LUMINARY CABLE
More informationGUY-GRIP Dead-end NOMENCLATURE GENERAL INFORMATION SAFETY CONSIDERATIONS
GUY-GRIP Dead-end NOMENCLATURE Please visit our web site at www.preformed.com for additional literature.guy-grip Dead-end Application Procedure - SP2045 Cross-over Marks: (A) Indicate starting point for
More informationSPECIFICATIONS - DETAILED PROVISIONS Section Stainless Steel Sluice Gates C O N T E N T S
SPECIFICATIONS - DETAILED PROVISIONS Section 11294 - Stainless Steel Sluice Gates C O N T E N T S PART 1 - GENERAL... 1 1.01 SUMMARY... 1 1.02 REFERENCES... 1 1.03 DEFINITIONS... 1 1.04 DESIGN REQUIREMENTS...
More informationSECTION VIBRATION AND SEISMIC CONTROLS FOR HVAC PIPING AND EQUIPMENT
SECTION 230548 - VIBRATION AND SEISMIC CONTROLS FOR HVAC PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary
More informationDURA-BLOK rooftop supports BRTS-13 DURA-BLOK. A complete rooftop support solution
DURA-BLOK rooftop supports BRTS-13 DURA-BLOK A complete rooftop support solution DURA-BLOK rooftop solutions support DURA-BLOK supports are made of 100% recycled rubber and are designed to provide an economical
More informationOVERSHOT GATE TECHNICAL DATA SHEET
FRESNO OVERSHOT GATE TECHNICAL DATA SHEET Applications Fresno Overshot Gates effectively control upstream and downstream levels of canals. Improved flow control is achieved through the use of this fully
More informationThis product specification is written according to the Construction Specifications Institute MasterFormat, 2014 Update.
Kaf-Tech Product Specification This product specification is written according to the Construction Specifications Institute MasterFormat, 2014 Update. SECTION 260519 METAL CLAD CABLE - MC-PLUS Neutral
More informationRepair Maintenance Hangar Phase II August 2010 SECTION LIGHTNING PROTECTION SYSTEM PART 1 GENERAL
SECTION 16601 LIGHTNING PROTECTION SYSTEM PART 1 GENERAL 1.1 SCOPE A. Furnish and install all materials and labor required to provide a complete functional lightning protection and common ground system
More informationCONSTRUCTION SPECIFICATION FOR POLE ERECTION
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 615 SEPTEMBER 1993 CONSTRUCTION SPECIFICATION FOR POLE ERECTION 615.01 SCOPE 615.02 REFERENCES 615.05 MATERIALS TABLE OF CONTENTS 615.05.01 Concrete.02
More informationStudent Services & Classroom Addition SECTION VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS
SECTION 26 05 48 - VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 SUMMARY A. Section includes: 1. Isolation pads. 2. Spring isolators. 3. Restrained spring isolators. 4. Channel
More informationFixings, bonds and clamps
Square tape clamp Material 25 x 3mm Copper 0.12kg CT105-H 25 x 6mm Copper 0.30kg CT110-H 50 x 6mm Copper 0.60kg CT115-H Manufactured from high quality copper and aluminium alloys. Simple to install, providing
More informationMechanical Requirements for Stainless Steel & Non-Ferrous Fasteners
Mechanical Requirements for Steel & Non-Ferrous Fasteners Grade(1 ) General Descriptio n of Material Bolts, Screws and Studs Full Size Bolts, Screws, Studs Yield (2) Strengt h Min Tensile Strengt h Min
More informationEasy assembly with standard tools. Fully insulated for direct mounting to steel panels. Threaded stud and
1496-1497.qxp 12/16/2013 8:44 PM Page 1497 Cam-Lok J Series Connectors or NEMA 4 Cam-Lok J Series Connectors are specifically designed to meet the needs of demanding portable applications. J Series Plugs
More informationPRODUCT LINE TABLE OF CONTENTS. Blue highlighted items are industry standard and most frequently ordered.
BURNDY Overhead PRODUCT LINE TABLE OF CONTENTS TAP CONNECTORS Mechanical (Bolted)............ H-3 - H-17 Compression................ H-18 - H-37 Transformer and Equipment..... H-38 - H-40 COMPRESSION SPLICES
More informationB-LINE SERIES. DURA-BLOK rooftop supports BRTS-17 DURA-BLOK. A complete rooftop support solution
DURA-BLOK rooftop supports BRTS-17 B-LINE SERIES DURA-BLOK A complete rooftop support solution DURA-BLOK rooftop solutions support DURA-BLOK supports are made of 100% recycled rubber and are designed to
More informationSECTION ORNAMENTAL ALUMINUM RAILING
SECTION 05730 ORNAMENTAL ALUMINUM RAILING PART 1 GENERAL 1.1 SECTION INCLUDES A. Decorative Wire Rope Railing 1.2 RELATED SECTIONS A. Section 03300 Cast-In-Place Concrete: Placement of sleeves cast in
More informationA-Series Steel Gantry Crane
SPANCO PRODUCT SPECIFICATIONS 1 A-Series Steel Gantry Crane This guide can be used to prepare a bid specification for the incorporation of an A-Series Gantry Crane into a competitive bid project or application.
More informationSECTION HANGERS AND SUPPORTS FOR PLUMBING
SECTION 22 05 29 HANGERS AND SUPPORTS FOR PLUMBING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationCONSTRUCTION SPECIFICATION FOR GROUNDING
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 609 NOVEMBER 2001 CONSTRUCTION SPECIFICATION FOR GROUNDING TABLE OF CONTENTS 609.01 SCOPE 609.02 REFERENCES 609.03 DEFINITIONS - Not Used 609.04 DESIGN
More informationITEM 442 METALS FOR STRUCTURES
AFTER NOVEMBER 1, 2008 ITEM 442 METALS FOR STRUCTURES 442.1 Description. These specifications shall govern for materials such as structural steel, wrought iron, bronze, and other metals used in structures,
More informationDURA-BLOK is made from 100% recycled rubber and qualifies for LEED credits. Reflective strips on both sides allow for easy product visibility.
is made from 100% recycled rubber and qualifies for LEED credits. Reflective strips on both sides allow for easy product visibility. Channels are through bolted on all sizes for added strength and a 1
More informationWater & Industrial Products Catalog
Water & Industrial Products Catalog www.smith-blair.com info@smith-blair.com Phone: 800..9705 or 870.77.527 After Hours Number: 90.277.998 Fax: 800.8.792 or 870.77.52 EMERGENCY PHONE 90.277.998 In the
More informationSplices COOPER POWER SERIES. Connectors Catalog Data CA325007EN. Contents
Connectors Catalog Data CA325007EN Supersedes March 2016 COOPER POWER SERIES Contents Description Page Single-tension sleeves... 2 Dual-tension sleeves... 2 Tension sleeves... 3 Jumper sleeves... 4 Bare
More informationDB10 BLTD C10 Pipe Support. Description. Manufacturer Information BOLTED FRAMING GTIN UPC
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 DB10 BLTD C10 Pipe Support Cooper B-Line/Cable Tray Catalog Number Manufacturer Description Weight per unit Product Category
More informationNORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017
SECTION 22 0548 - PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationMaterials Carbon Steel is used in the manufacturing of riser and pipe clamps. Stainless Steel and other materials are available.
Pipe clamps offered in this section are designed for support and attachment of pipe to structural members. wide range of pipe clamps are available for various applications. Materials arbon Steel is used
More informationNORTHWESTERN UNIVERSITY PROJECT NAME JOB #
SECTION 26 0529 - HANGERS AND SUPPORTS FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and
More information