YuanBo Engineering Co., Ltd. WATER TANK.
|
|
|
- Christine Johnson
- 6 years ago
- Views:
Transcription
1 YuanBo Engineering Co., Ltd. WATER TANK
2 Get the most suitable water tank for your home or project. YuanBo Engineering has been specialized in manufacturing FRP water tank, Galvanized water tank and Stainless Steel water tank for storing drinking water, pollution water and any other liquid. The sectional water tank are used for storing water, water supplying and water circular system. The water tanks are widely used in families, schools, commercial buildings, industry projects and so on. They can store drinking water, acid liquid, alkali liquid as well as high temperature liquid. Several water tanks can be connected with each other as one container. YuanBo Engineering have skilled workers, advanced machinery and professional sellers to provide you expert advise on water tanks choosing to fit your working site, surrounding environment, special climates and using purpose. We have workers who can go to your country to install the tanks for you. Stainless Steel Water Tank GRP Water Tank Galvanized Water Tank Enamel Water Tank 2 YuanBo Engineering Co., Ltd.
3 Stainless Steel Water Tank Material: stainless steel 304, stainless steel 316. Capacity: m³. Wall thickness: 1 18 mm. Using life: at least 150 years using life. Panel size: 1000 mm 1000 mm, 1000 mm 500 mm, 500 mm 500 mm. Volume (m³) Length Width Height Cover board Baseboard Edge distance Spacing Number Accessories Steel base. Out and inside strengthen steel. Tie piece. Ladder. Angle steel. Bolt and nut. Gasket. Glass glue. Advantages Never rust. Never leak. Good sealing. Easy to install. Easy to clean. Good-looking appearance. Heat preservation. Application Storing water tank for families and buildings. Water supply system for industry. Water circulation system. Used in cooling system. 3 YuanBo Engineering Co., Ltd.
4 Galvanized Water Tank Material: galvanized steel Q235 panel. Capacity: m³. Wall thickness: 1 18 mm. Using life: at least 100 years using life. Length: 1 10 m. Width: 1 10 m. Height: 1 4 m. Panel size: 1000 mm 1000 mm, 1000 mm 500 mm, 500 mm 500 mm. Advantages Good sealing. Corrosion resistance. High pressure resistance. Meet the standard for storing drinking water. Customization acceptable. Application Water supplying for construction, industry, mining and so on. Cooling system. Used in heating system condensation. Storing drinking water for families, school and other buildings. 4 YuanBo Engineering Co., Ltd.
5 FRP Water Tank Material: fiber reinforce plastic panel. Capacity: m³. Wall thickness: 5 mm, 8 mm, 10 mm, 12 mm, 14 mm, 16 mm. Using life: at least 100 years using life. Length: 1 7 m. Width: 1 7 m. Height: 1 m, 1.5 m, 2 m, 2.5 m. Panel size: 1000 mm 1000 mm, 1000 mm 500 mm, 500 mm 500 mm. Volume (m 3 ) Height (m) Length Width (m) Performance of SMC panel Tensile strength 70 MPa Bending strength 100 MPa Flexural modulus of elasticity 5900 MPa Barcol hardness 60 Water absorption rate 1.0 Glass fiber content 25 5 YuanBo Engineering Co., Ltd.
6 Advantages Light weight. Good sealing. Long using life. Convenient installation. Wide range of application. Good heat preservation performance. No corrosion. No pollution. Neat and nice appearance. Application Storing drinking water. Storing acid and alkali. Water circulation system. Water cooling system. Water supplying system. support steel cover manhole board support steel ladder outside ladder inside brace brace inside the tank brace plate outside basic channel steel leaking stoppage concrete foundation water outlet support steel brace inside the tank brace plate outside water outlet positioning clamp leaking stoppage 6 YuanBo Engineering Co., Ltd.
7 Enamel Water Tank Material: steel panel with ceramic glaze. Capacity: m³. Wall thickness: 1 16 mm. Using life: at least 200 years using life. Length: 1 10 m. Width: 1 10 m. Height: 1 m, 1.5 m, 2 m, 2.5 m. Panel size: 1000 mm 1000 mm, 1000 mm 500 mm, 500 mm 500 mm. Advantages No pollution and most suitable for drinking water. No leakage. Rust free. Good heat preservation performance. Environmentally friendly. High strength. Long using life. Application Storing drinking water. Storing ultra pure water. Storing edible oils. Used in industry waste water treatment system. Used in cooling system and circulation system. 7 YuanBo Engineering Co., Ltd.
8 YuanBo Engineering Co., Ltd. Address: No. 88, Industrial zone, Hengshui City, Hebei province, China. Tel: Phone: Fax: Web: Skype: gdx
Hot Pressed GRP Sectional Water Storage Tanks Manufacturer
Emen Ista Electric Co. Hot Pressed GRP Sectional Water Storage Tanks Manufacturer EISECO. GRP Sectional Water Storage Tanks Introduction to EISECO. Hot Pressed GRP Sectional Water Storage Tanks EISECO.
External Reinforcement System
(Revised October 2013) Specifications of SMC Water Tank Product External Reinforcement System DOHA INDUSTRY CO., LTD. Table of Contents 1. General Matters A. Scope of Application B. Product Requirements
Khalid SINCE 1997 TECHNICAL MANUAL 2017 GRP MANHOLE LINER & ACCESSORIES
Khalid SINCE 1997 TECHNICAL MANUAL 2017 GRP MANHOLE LINER & ACCESSORIES KPIC - GRP MANHOLE LINER GRP manhole liner & accessories are made of KPIC GRP pipes as integral part of pipe installations. Their
SEJIN GRP WATER TANK
중소기업기술혁신협회 SEJIN GRP WATER TANK Outstanding in Heat Insulation Excellent Strength Versatile Capacity Excellent Sanitation Easy Assembly Perfect Watertightness CLEAN WATER BEGINS WITH SEJIN! The Highest
WALCOOM. Walcoom Corporation FIBERGLASS MESH.
WALCOOM Walcoom Corporation FIBERGLASS MESH "Walcoom produce fiberglass mesh with strict standards to meet your high requirements." Since its establishment 20 years ago, walcoom constantly innovate and
HEBEI CHENGDA PIPES CO., LTD.
HEBEI CHENGDA PIPES CO., LTD. Contents 1 Winder 2.5"FRP Membrane Housing 02 2 Winder 4"FRP Membrane Housing 05 3 Winder 8"FRP Membrane Housing 12 4 DTRO FRP Housing 21 5 FRP Precision Filter 22 6 Quality
Product Guide Specification
MFG Water Treatment Products Company 55 Fourth Avenue PO Box 458 Union City, Pennsylvania 16438 Toll Free (877) 826-2509 Phone (814) 438-3959 Fax (814) 438-8538 Web Site www.mfgwtp.com Product Guide Specification
SECTION FACILITY F.R.P. BOLTED PANEL TYPE, POTABLE-WATER STORAGE NON-PRESSURE TANKS
SECTION 22 12 24 FACILITY F.R.P. BOLTED PANEL TYPE, POTABLE-WATER STORAGE NON-PRESSURE TANKS SPEC WRITER NOTES: 1. Delete between //-----// if not applicable to project. Also delete any other item or paragraph
SECTION FLAT WALK-ON TYPE ALGAE CONTROL/LAUNDER COVERS
PART 1 GENERAL 1.01 THE REQUIREMENT SECTION 11301 FLAT WALK-ON TYPE ALGAE CONTROL/LAUNDER COVERS A. The contractor shall furnish and install complete Flat Walk-On Algae Control/Launder Covers as shown
TENDER NO. PGVCL/PROC/HT SMC Meter Box/872
TECHNICAL SPECIFICATION FOR HT AMR METER BOXES MADE FROM GLASS REINFORCED POLYSTER SHEET MOULDING COMPOUNDS (SMC). 1.0 SCOPE: 1.1 This specification covers the design, manufacturing and testing of anticorrosive,
WALCOOM. Walcoom Corporation WROUGHT IRON FENCE.
WALCOOM Walcoom Corporation WROUGHT IRON FENCE Wrought iron fence is very common and also widespread fence all around the world. As a widely product, it adapt to various kinds of architectures and surroundings,
WATER TANK. Clean Water Begins with Sejin! SEJIN SMC
Clean Water Begins with Sejin! WATER TANK Outstanding in Heat Insulation Excellent Strength Versatile Capacity Excellent Sanitation Easy Assemnbly Perfect Watertightness Clean Water Begins with Sejin!
WEIR PLATES & SCUM BAFFLES
WEIR PLATES & SCUM BAFFLES Bedford Reinforced Plastics Weir Plates and Scum Baffles are available in any SIZE, any LENGTH and any CONFIGURATION Benefits Corrosion Resistant Maintenance Free Strong Easy
Installation & maintenance instructions
One piece, KD & 2 part cold water storage tanks Installation & maintenance instructions Nicholson Plastics Ltd. GRP Specialist since 1968 Table of contents 1. Guidelines for locating water tanks... 1 2.
CITY OF ODESSA SPECIAL SPECIFICATIONS ITEM 1000 GLASS-FIBER REINFORCED POLYESTER (FRP) REHAB/REPLACEMENT MANHOLE
CITY OF ODESSA SPECIAL SPECIFICATIONS ITEM 1000 GLASS-FIBER REINFORCED POLYESTER (FRP) REHAB/REPLACEMENT MANHOLE 1000.1 DESCRIPTION These specifications shall govern the furnishing of glass-fiber reinforced
Study on Cold Insulation Construction Technology of LNG Low Temperature Storage Tank Wall
2017 3rd Annual International Conference on Modern Education and Social Science (MESS 2017) ISBN: 978-1-60595-450-9 Study on Cold Insulation Construction Technology of LNG Low Temperature Storage Tank
Product Datasheet. Fire Hose Reel (Page 3)
Product Datasheet Fire (Page 2) Fire Hose Reel (Page 3) Flush Type Hose Reel Cabinet (Page 4) GRP Fire cabinets are used for indoor and outdoor application with weatherproof and antistatic properties,
Glass Steel, InC. 1. Fiberglass Composite Troughs. Elmira, CA Flat Bottom Curved Troughs
Glass Steel, InC. 1 Fiberglass Composite Troughs Elmira, CA Flat Bottom Curved Troughs Glass Steel, InC. 2 Fiberglass composite troughs Glass-Steel, Inc. manufactures a proprietary system of composite
WALCOOM. Walcoom Corporation SINTERED MESH.
WALCOOM Walcoom Corporation "A good solution for water treatment and gas filtration" Walcoom Corporation has been offering the strong and durable sintered mesh products for 20 years. We are specialized
Polymer Composites as Construction Materials
Polymer Composites as Construction Materials Application Summary Sheet 25 Title: Non-Ferrous Reinforcing Bars Target Audience: Civil Engineers, Architects, Structure designers, Specifiers, Government Authorities,
MEARIN Plus and Expert drainage system CW 150
MEARIN Plus and Expert Drainage channel with channel groove MEARIN Plus 500 500 1000 MEARIN Plus.1RW MEARIN Plus.1 MEARIN Plus.0 187 152 247 15 247 Material properties unit and construction unit o SMC
TECHNICAL SPECIFICATION DANTECO HERMANNS. CONTAINER FOR BULK POWDER Equipped with HERMANNS Aeration and Conveyance Device
TECHNICAL SPECIFICATION DANTECO HERMANNS CONTAINER FOR BULK POWDER Equipped with HERMANNS Aeration and Conveyance Device 6058(20') x 2438(8') x 2591(8'6") MODEL NO. : CX09-20SNX1 SPEC. NO : CX09-20SNX1-S3
1. Introduction 2. FRP for Structural Strengthening. 3. Beam, Slab and Column Strengthening
Structural using Advanced FRP Technology Contents 1. Introduction 2. FRP for Structural 3. Beam, Slab and Column FYFE (Hong Kong) Limited Unit 7, 20/F., Block B, New Trade Plaza 6 On Ping Street, Shatin,
(G) DOORS & WINDOWS LIST OF BUREAW OF INDIAN STANDARD CODE OF PRACTICE (ISI)
(G) DOORS & WINDOWS LIST OF BUREAW OF INDIAN STANDARD CODE OF PRACTICE (ISI) 4021 : Specification for teak wood. 287 : Recommendation for maximum permissible moisture content 1141 : Specification for code
FRP Baffle Wall Standard Specification-Section 11350
-Section 11350 1. General Information The work covered by this section shall include (but shall not be limited to) materials and installation for the fiberglass reinforced plastic (FRP) Baffle Wall System.
DETERMINATION OF ULTIMATE FLEXTURAL CAPACITY OF STRENGTHENED BEAMS WITH STEEL PLATES AND GFRP INTRODUCTION
13 th World Conference on Earthquake Engineering Vancouver, B.C., Canada August 1-6, 2004 Paper No. 3242 DETERMINATION OF ULTIMATE FLEXTURAL CAPACITY OF STRENGTHENED BEAMS WITH STEEL PLATES AND GFRP Javad
Maharashtra State Electricity Distribution Company Limited. SPECIFICATION NO. MMC: MSC-II/Multi Meter box/smc/2018/10 TECHNICAL SPECIFICATION FOR
Maharashtra State Electricity Distribution Company Limited SPECIFICATION NO. MMC: MSC-II/Multi Meter box/smc/2018/10 TECHNICAL SPECIFICATION FOR FOR MULTI-METER BOX SUITABLE FOR HOUSING 4/8/12/18 NOS.OF
Refractory Materials
Refractory Materials Refractory Materials Widely used at the bell type furnace, annealing furnace, heating furnace, hot blast stove, sintering furnace, resistance furnace, Muffle furnace, roller kiln,
Tunnel Reinforcement for the 21st Century Durus S300.
Who are we? Adfil are part of Low and Bonar who are an international business to business performance materials group. What do we do? As do all group companies we design and manufacture components which
SECTION ALUMINUM WALKWAY COVERS. A. The requirements of Division 1 specifications shall apply to work specified in the section.
SECTION 10 5300 ALUMINUM WALKWAY COVERS Part 1 General 1.01 Related Documents A. The requirements of Division 1 specifications shall apply to work specified in the section. 1.02 References A. International
Fiberglass Composite Stop Logs, Stop Gates, and Stop Plates FM 1314 Conroe, TX (281) office (281) fax
Glass Steel, InC. 1 Fiberglass Composite Stop Logs, Stop Gates, and Stop Plates Glass Steel, Inc. 18468 FM 1314 Conroe, TX 77302 (281) 572-2211 office (281) 572-2212 fax www.glasssteelinc.com (3 s s in
Glass & Quartz Components
VACUUM Glass & Quartz Components KF Chain Clamps for Glass Components DN 10 / 16-63... 04 ISO Chain Clamps for Glass Components DN 80-160... 06 KF Elastomer Seals for Glass Components DN 10 / 16-63...
Research on the Key Technology of Hinge Joint Diseases Treatment without Traffic Interruption for Plate Girder Bridge
MATEC Web of Conferences 22, 04005 ( 2015) DOI: 10.1051/ matecconf/ 20152204005 C Owned by the authors, published by EDP Sciences, 2015 Research on the Key Technology of Hinge Joint Diseases Treatment
The Trellex Poly-Cer support you up to profitable heights
The Trellex Poly-Cer support you up to profitable heights Trellex Poly-Cer is designed to be extremely resistant to abrasion even in high material flows and speeds. The unique design of ceramic inserts
HEBEI QIANLI RUBBER PRODUCTS CO., LTD. DRILLIN HOSE. Quality Assurance. Safety Of Mechanical Parts
HEBEI QIANLI RUBBER PRODUCTS CO., LTD. DRILLIN HOSE T E C H N I C A L D A T A Quality Assurance Safety Of Mechanical Parts ABOUT OUR COMPANY Owing to over twenty years market experiences in supplying high-
SAMPLE SPECIFICATIONS FOR PREFABRICATED FRP LIFT STATIONS
SECTION 1-GENERAL 1 DESCRIPTION a. Scope of Work: i. Contractor shall furnish labor, materials, equipment, and performance of all work necessary or incidental to furnish and install a simplex/duple x-prefabricated
Level 6 Graduate Diploma in Engineering Structural analysis
9210-111 Level 6 Graduate Diploma in Engineering Structural analysis Sample Paper You should have the following for this examination one answer book non-programmable calculator pen, pencil, ruler, drawing
Risk Assessment & Safe Working Practice
RA Ref Number: 38 Revision: 3 Project/Job Number Reference Insert Job Number Approval Date: 30/03/2018 RA Description: Installing cable tray and basket Next Review Date: 01/04/2019 Notes: Please refer
Contents. MAGO Anchor Channel. Copyrights. Anchor Channel. Hot-Rolled Anchor Channel - ACH. Stainless steel Cold rolled Anchor channel ACF-S
Contents MAGO Anchor Channel Anchor Channel Hot-Rolled Anchor Channel - ACH Stainless steel Cold rolled Anchor channel ACF-S Standard lengths and anchor spacing T-bolt Tightening Torque Framing Channels
GFRP systems for. for diaphragm walls and piles
GFRP systems for for diaphragm walls and piles 0 U n d e r g r o u n d & C i v i l W o r k s d i v i s i o n ATP is present in the FRP market for more than thirty years and it is today one of the leading
User Manual. Formwork System.
User Manual Formwork System www.scformwork.com Content Square column system...3 Specs & Capability...4 How to set up...5 Clamps...7 Pour rate & Safe filling height...09 Circular column system...11 Detail
ARC Insulations & Insulators (P) Ltd. Manufacturer of Fiberglass Composites
FIBER GLASS (GRP) TANKS LIGHTWEIGHT, STRONG & DURABLE We ARC have been installing & commissioning of industrial equipments for chemical processing, in design, manufacture and supply of various items made
imperband standard kit
Data sheet imperband standard kit The standard imperband kit is an indoor waterproofing system consisting of a ABS outlet thermowelded to a 150 x 225 cm waterproof sheet. Specially recommended for waterproofing
TFC KAOHSIUNG FACTORY 30 KMT AMMONIA STORAGE TANK INSPECTION REPORT. By: Jackson Yang (TFC R&D Department) 01 Oct 2016
TFC KAOHSIUNG FACTORY 30 KMT AMMONIA STORAGE TANK INSPECTION REPORT By: Jackson Yang (TFC R&D Department) 01 Oct 2016 1 CONTENT 1. Introduction 2. Internal Inspection Planning 3. Applied Inspection Technique
B. Fiberglass for construction in back lot easements placed on cast-in-place base.
Section 02083 PART 1 G E N E R A L 1.01 SECTION INCLUDES A. Fiberglass manholes for unpaved areas placed on top of a precast base to form a manhole. B. Fiberglass for construction in back lot easements
Series 400 Structural repair system that doubles the strength of the original timber pile. SeaShield Marine Systems. Features
SeaShield Marine Systems The SeaShield Series 400 System has been independently tested by Texas A&M University, Department of Civil Engineering, Structural and Materials Testing Laboratory. Features Provides
TRACK RAIL. Base Shoe Railing System
TRACK RAIL Base Shoe Railing System The Track Rail base shoe glass railing system is designed and constructed using laminated or fully tempered glass. Our glass railing system can be mounted as an independent
ENGINEERING SPECIFICATION PULTRUDED DYNAFORM FIBERGLASS STRUCTURAL SHAPES. March 16,
ENGINEERING SPECIFICATION PULTRUDED DYNAFORM FIBERGLASS STRUCTURAL SHAPES March 16, 2015 06610-1 SECTION 06610 FIBERGLASS REINFORCED PLASTICS (FRP) FABRICATIONS PULTRUDED FIBERGLASS STRUCTURAL SHAPES PART
WALCOOM. Walcoom Corporation PLASTIC MESH.
WALCOOM Walcoom Corporation PLASTIC MESH Plastic protective netting Walcoom plastic protective netting can be divided into three types: grass protection mesh, grass reinforcement mesh and tree guards.
TECHNICAL SPECIFICATIONS TECHNICAL SPECIFICATION FOR FRP FENCING AROUND DISTRIBUTION TRANSFORMER STATIONS
Page 1 of 5 TECHNICAL SPECIFICATIONS 1.0 SCOPE: TECHNICAL SPECIFICATION FOR FRP FENCING AROUND DISTRIBUTION TRANSFORMER STATIONS This specification covers the basic requirement for the complete design,
KWIKERECT SERIES 6000 BOLTED & BOLTLESS SHELVING NORTH AMERICAN STEEL
NORTH AMERICAN STEEL KWIKERECT SERIES 6000 BOLTED & BOLTLESS SHELVING STORAGE SYSTEMS ECONOMICAL QUALITY STEEL SHELVING SYSTEMS FOR OFFICE, INDUSTRIAL OR COMMERCIAL USE. BOLTED OR BOLTLESS (EASILY ADJUSTABLE
Building Your Visions
Ferguson C EAP Curtain Wall Systems Ferguson-EAP 130HP Series High Performance Curtain Wall System Ferguson s 130HP curtain wall system was developed for high performance double, triple, unique acoustical
Parabond 600 Elastic glue and adhesive with extremely high initial bonding
Parabond 600 Elastic glue and adhesive with extremely high initial bonding Product: Parabond 600 is a high-quality, quickly drying, durable MS-Polymer based elastic glue and adhesive with a very high initial
Analysis of Concrete Filled Double Skin Steel Tube (CFDST) column with CFRP wrapping
Analysis of Concrete Filled Double Skin Steel Tube (CFDST) column with CFRP wrapping Anju Alias 1, Susan Jacob 2 1PG Student, Department of Civil Engineering, FISAT, Angamaly, India 2Assistant Professor,
HEBEI KESHI METAL WIRE MESH CO., LTD. HORSE FENCE PANEL EASILY ASSEMBLED AND DISASSEMBLED PORTABLE AND PERMANENT FENCING
HEBEI KESHI METAL WIRE MESH CO., LTD. HORSE FENCE PANEL EASILY ASSEMBLED AND DISASSEMBLED PORTABLE AND PERMANENT FENCING SAFETY OF ANIMALS AND PEOPLE UTILITY AND VERSATILITY KESHI Horse Fence Panel About
Parabond 600 Elastic adhesive sealant with high initial bonding strength.
Parabond 600 Elastic adhesive sealant with high initial bonding strength. Product: Parabond 600 is an MS-polymer based, durable and fast curing elastic adhesive. Applications: Parabond 600 has a very high
Bin Activators. Solids Discharging Devices
Bin Activators Solids Discharging Devices The three main types of flow problems when discharging from silos are: bridging, rat holing and segregation. Shaking the container generally discharges the product,
Parabond 600 Elastic adhesive sealant with high initial bonding strength.
Parabond 600 Elastic adhesive sealant with high initial bonding strength. Product: Parabond 600 is an MS-polymer based, durable and fast curing elastic adhesive. Applications: Parabond 600 has a very high
HOT PRESSED GRP SECTIONAL WATER TANKS
BALMORAL SECTIONAL TANKS HOT PRESSED GRP SECTIONAL WATER TANKS Information Technical data GRP sectional water tanks www.sectionaltanks.com Balmoral Group Balmoral Group Holdings Ltd is a privately owned
DORTEK INC. SPECIFICATION MOLDED FIBERGLASS DOORS AND FRAMES
PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Fire rated Molded fiberglass composite door. 2. Fire rated Molded fiberglass composite frame. 1.2 RELATED DOCUMENTS DORTEK INC. SPECIFICATION MOLDED
Application of Tensioned CFRP Strip Method to an Existing Bridge
SP-230 66 Application of Tensioned CFRP Strip Method to an Existing Bridge by A. Tateishi, A. Kobayashi, Y. Hamada, T. Takahashi, and H. Yasumori Synop nopsis: s: Tensioned carbon fiber reinforced polymer
Building Integrated PV System (BIPV) Tile-in Roof PV Mounting System Integrated Roof Carport Façade PV Greenhouse
Building Integrated PV System (BIPV) Tile-in Roof PV Mounting System Integrated Roof Carport Façade PV Greenhouse Perfect Integration of PV System & Architecture BIPV Mounting System We pursuit user-friendly
BOND BEHABIOR BETWEEN DEFORMED ARAMID FIBER-REINFORCED PLASTIC REINFORCEMENT AND CONCRETE
October 12-17, 8, Beijing, China BOND BEHABIOR BETWEEN DEFORMED ARAMID FIBER-REINFORCED PLASTIC REINFORCEMENT AND CONCRETE Yuji NAKAYAMA 1, Hiroshi NAKAI 2 and Toshiyuki KANAKUBO 3 ABSTRACT : 1 Graduate
Experimental Vacuum Process for Retroffiting Concrete Structures
Experimental Vacuum Process for Retroffiting Concrete Structures A. Padilla-Ramírez, A. Flores Bustamante, M.I. Panamá Armendáriz & F. González Díaz UAM Azcapotzalco, Av. San Pablo No 18, Col Reynosa Tamaulipas,
Ultimate strength prediction for reinforced concrete slabs externally strengthened by fiber reinforced polymer (FRP)
Ultimate strength prediction for reinforced concrete slabs externally strengthened by fiber reinforced polymer (FRP) Abstract This paper presents the potential use of externally bonded fiber reinforced
Steel Forming System BROCHURE. A durable, all-steel forming system that is ideal for pier caps and self-spanning applications.
Max-A-Form Steel Forming System BROCHURE A durable, all-steel forming system that is ideal for pier caps and self-spanning applications. Max-A-Form System Design The Max-A-Form Forming System combines
SECTION SLOPED TRANSLUCENT METAL SKYLIGHT SYSTEM
PART 1- GENERAL 1.1 SUMMARY A. Section Includes: SECTION 084523 - SLOPED TRANSLUCENT METAL SKYLIGHT SYSTEM 1. Flat factory prefabricated structural insulated translucent sandwich panels; with glazed endwalls.
Case study. Investigation into the Failure of an FRP Vertical Cylindrical Tank
Case study Investigation into the Failure of an FRP Vertical Cylindrical Tank A glass fibre tank to be used for the treatment of waste water was supplied to a waste water treatment works in the UK. After
Polycarbonate solid sheets with U.V. protection on both sides
4.1 SOLID SHEETS Polycarbonate solid sheets with U.V. protection on both sides DESCRIPTION The development of extrusion technology have allowed the construction of a plant unique in Europe for the production
WALCOOM. Walcoom Corporation WATERPROOF BOARD.
WALCOOM Walcoom Corporation WATERPROOF BOARD "Walcoom is a trustworthy supplier can offer various sizes and types of waterproof boards to prevent infiltration and stabilize foundation." For over 20 years,
Qualified Product Policy 15 Drainage Structure Miscellaneous Components Qualified Product List 14 [G] Heavy Duty Gray Cast Iron
![Qualified Product Policy 15 Drainage Structure Miscellaneous Components Qualified Product List 14 [G] Heavy Duty Gray Cast Iron](/thumbs/80/80930557.jpg "Qualified Product Policy 15 Drainage Structure Miscellaneous Components Qualified Product List 14 [G] Heavy Duty Gray Cast Iron")
SCDOT Qualified Product Policy 15 1 SOUTH CAROLINA DEPARTMENT OF TRANSPORTATION Drainage Structure Miscellaneous Components (See also QPL14 for precast drainage structure components) This policy covers
SECTION STEEL DOORS AND FRAMES PART 1 - GENERAL 1.1 RELATED DOCUMENTS
SECTION 08110 - STEEL DOORS AND FRAMES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General, Supplementary, and Special Conditions and Division 1 Specification
Alisply Circular Headquarters - Spain Alsina USA - Chicago Alsina USA - Miami
Alisply Circular Headquarters - Spain Encofrados J. Alsina, S.A. Camí de la Font Freda, 1 08110 - Montcada i Reixac, Barcellona - Spain Tel. +34 935 753 000 Fax. +34 935 647 059 E-mail: alsina@alsina.es
FRP-confined concrete-encased cross-shaped steel columns: stub column tests
University of Wollongong Research Online Faculty of Engineering and Information Sciences - Papers: Part B Faculty of Engineering and Information Sciences 2016 FRP-confined concrete-encased cross-shaped
FIBERGLASS REINFORCED PLASTIC (FRP) LAUNDER COVERS
FIBERGLASS REINFORCED PLASTIC (FRP) LAUNDER COVERS PART 1 GENERAL 1.1. SUMMARY A. This Section includes fiberglass reinforced plastic (FRP) launder covers for clarifier basins and other applications as
Labko FRW Basic flow regulation well
www.wavin-labko.fi WAVIN-LABKO OY Labkotie 1 FIN-36240 KANGASALA Tel: +358 (0)20 1285 210 Fax: +358 (0)20 1285 280 E-mail: tanks@wavin-labko.fi 06/09 Labko FRW Basic flow regulation well Installation,
WALL & CEILING LINER PANELS
WALL & CEILING LINER PANELS WALL & CEILING LINER PANELS Quality, commitment and innovation Glasteel, with more than 50 years of experience, is one of the largest manufacturers of Fiberglass Reinforced
IAPMO Z yy. Rainwater Harvesting Tanks. 1 Scope. 2 Reference Publications
Standards Action - February 10, 2017 - Page 29 of 40 pages IAPMO Z1002 20yy 1 Scope 1.1 This Standard covers rainwater harvesting tanks and specifies requirements for design, materials, manufacture, performance,
SECTION METAL FABRICATIONS FOR STEAM UTILITY DISTRIBUTION
PAGE 055015-1 SECTION 055015 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification sections,
BEHAVIOR OF INFILL MASONRY WALLS STRENGTHENED WITH FRP MATERIALS
BEHAVIOR OF INFILL MASONRY WALLS STRENGTHENED WITH FRP MATERIALS D.S. Lunn 1,2, V. Hariharan 1, G. Lucier 1, S.H. Rizkalla 1, and Z. Smith 3 1 North Carolina State University, Constructed Facilities Laboratory,
HDPE HDPE. Factory PRESSURE PIPING SYSTEM DRAINAGE & SEWERAGE PIPING CABLE DUCT & SUB DUCT. Since 2002 HDPE. for Sewerage Storm Water System HDPE
PRESSURE PIPING SYSTEM DRAINAGE & SEWERAGE PIPING CABLE DUCT & SUB DUCT for Sea Water Intake for Gas Transportation for Sewerage Storm Water System Manholes Factory Since 2002 for Cold Water Supply & Irrigation
Pipelines & Liquid Storage Structures
Pipelines & Liquid Storage Structures The application of the Tyfo FIBRWRAP System in Pipelines and Liquid Storage Structures (Treatment Plants, Medium to large diameter Concreate and Steel Pipes, Reservoirs,
LOGIK. Forming System
LOGIK Forming System LOGIK Wall formwork crane-handled Description The Logik panel system for crane handling, produces up to 1670 psf concrete pressure resistance from a strong panel. The panel frames
Carbon Fibre Textile
Identification No. R - 15 Carbon Fibre Textile 1.Description: Unidirectional carbon fibre textile with carbon fibres in the longitudinal direction. This textile is protected against pollution by a membrane.
SPECIFICATION FOR SPHERICAL VESSELS (PROJECT STANDARDS AND SPECIFICATIONS)
Page : 1 of 1 April 01 #03-1 Block Aronia, TABLE OF CONTENTS 1. GENERAL 1.1 Scope. DESIGN.1 Shell Design. Support Column Design.3 Opening Reinforcement. Nozzles and Manholes.5 Internals and Externals.
K. ASTM F436- Standard Specification for Hardened Steel Washers; 2011.
DIVISION 05 METALS 05 12 00 STRUCTURAL STEEL FRAMING PART 1 GENERAL 1.1 SECTION INCLUDES A. Structural steel framing members, support members. 1.2 RELATED REQUIREMENTS A. Section 05 50 00 - Metal Fabrications:
ENC SECURITY FENCE. aimscomposites.com Tel: INTERNATIONAL
ENC SECURITY FENCE aimscomposites.com Tel: 281-590-3240 E-mail: AIMSSALES@AIMS-INTL.COM ENC Security Fence Security Fence System Utility Transmission Sites / Telecommunications Sites / Airport Perimeter
TECHNICAL SPECIFICATION FOR SMC LT AMR METER BOXES MANUFACTURED FROM THERMOSETTING PLASTIC 1.0 SCOPE:
TECHNICAL SPECIFICATION FOR SMC LT AMR METER BOXES MANUFACTURED FROM THERMOSETTING PLASTIC 1.0 SCOPE: 1.1 This specification covers the design, manufacturing & testing of anticorrosive, dust proof, rust
SPECIFICATIONS FOR HONEYCOMB INTERNAL FLOATING ROOFS
PETREX SPECIFICATIONS FOR HONEYCOMB INTERNAL FLOATING ROOFS APPLICATION: REGULAR HYDROCARBONS SCOPE The roof shall be full-surface contact type designed to eliminate the presence of air-vapor mixture under
Numerical Study on Behaviour of Concrete Filled Tubes (CFT) under Static Load
Numerical Study on Behaviour of Concrete Filled Tubes (CFT) under Static Load Akshaya M.D 1, Sujith P.S 2 P.G. Student, Department of Civil Engineering, Axis College of, Ambanoly, Kerala, India 1 Assistant
G U T T E R SY S T E M
GUTTER SYSTEM Why should I buy steel gutters? A guttering system is a roof accessory that is used to quickly discharge hundreds of liters of water during a downpour. The Struga steel guttering system is
Model #369SM-RDP. 8/23/2016 Page 1 of 10
Model #369SM-RDP 8/23/2016 Page 1 of 10 /23/2016 Page 2 of 10 1675 Locust Street Red Bud, IL 62278 Phone: 618-282-8200 Fax: 618-282-8202 WARRANTY & TERMS WARRANTY: 5 Year Limited Warranty on Thermoplastic
SHEAR AND BUCKLING STRENGTHENING OF STEEL BRIDGE GIRDER USING SMALL-DIAMETER CFRP STRANDS
20 th International Conference on Composite Materials Copenhagen, 19-24 th July 2015 SHEAR AND BUCKLING STRENGTHENING OF STEEL BRIDGE GIRDER USING SMALL-DIAMETER CFRP STRANDS Hamid Kazem 1, Sami Rizkalla
Manufacturer of glass reinforced concrete products
Manufacturer of glass reinforced concrete products 1 Skonto Group Skonto Concrete Cladding is part of the Skonto Group, global turnover of 300M EUR of which the UK market represents 50M EUR 2 30 Cannon
Design Methods of Elements from Cross-Laminated Timber Subjected to Flexure
RIGA TECHNICAL UNIVERSITY INSTITUTE OF STRUCTURAL ENGINEERING AND RECONSTRUCTION A.Vilguts, D.Serdjuks, L.Pakrastins Design Methods of Elements from Cross-Laminated Timber Subjected to Flexure RIGA 2015
Installation Manual For Conical Tanks. INSTALLATION and MAINTENANCE INSTRUCTIONS FOR CONICAL TANKS
INSTALLATION and MAINTENANCE INSTRUCTIONS FOR CONICAL TANKS Page 1 of 10 INDEX 1. Health & Safety 3 2. Introduction 3 3. Requirements 3 4. Working Area 3 5. Equipment 3 6. 2 and 3 metre tank above ground
Analysis of Concrete Filled Double Skin Steel Tube (CFDST) column with FRP wrapping
Analysis of Concrete Filled Double Skin Steel Tube (CFDST) column with FRP wrapping Anju Alias 1, Susan Jacob 2 1PG Student, Department of Civil Engineering, FISAT, Angamaly, India 2Assistant Professor,
Formwork Direct International. Tel: Heavy Duty Panel System
Formwork Direct International Tel: 0151 532 0179 sales@formworkdirect.co.uk www.formworkdirect.co.uk Heavy Duty Panel System Product Overview The FD Max panel is a heavy duty wall formwork system capable
INSTALLATION GUIDE. Prismatic Sectional Water Tank MEKSIS A.Ş.
MEKSIS A.Ş. INSTALLATION GUIDE Prismatic Sectional Water Tank MEKSIS Mekanik Sistemler İmalat ve Müh. San. A.Ş. ASO 2.SANAYİ BÖLGESİ 2009.CAD.NO:6 TEMELLİ TÜRKOBASI KÖYÜ SİNCAN ANKARA Telefon : +90 312
SPECIAL SPECIFICATION 4900 Sacrificial Cathodic Protection Pile Jacket
1993 Specifications CSJ 0331-04-045 SPECIAL SPECIFICATION 4900 Sacrificial Cathodic Protection Pile Jacket 1. Description. This Item shall govern for the furnishing, installing and energizing a sacrificial