Product Catalogue 2018

Transcription

1 Product Catalogue 2018

2 Category Page Category Page Category Page Category Page Reinforcement Fabrics Peel Ply Coating Resin System Thixotropy Powder 152 Overview Carbon Fabrics 4-5 Polyester Non-Woven 81 Epoxy for Aquarium / Terrarium Cotton Flocks 153 Carbon Fabrics 6-13 Perforate Release Film 81 Epoxy Filler 126 Micro Balloons 153 Carbon Roving 13 Vacuum Bagging Film 82 Chopped Glass s 154 Overview Spread Tow Fabrics 14 Vacuum Bagging Tube 83 Mold and Casting Resins Colour Pigments 155 Spread Tow Carbon Fabrics Vacuum Mesh / Infusion Mesh 84 Silicone Mold System 128 Overview Additives 156 Overview Multiaxial Carbon Fabric 17 Double-Sided Adhesive Tape 85 PUR flexible Casting Resin 129 Foaming Agent 157 Multiaxial Carbon Fabrics Spray adhesive 85 PUR Fast Casting Resin 130 Thickening Agent 157 Carbon Fabric Tapes Sealant Tape 86 Acryl Casting Resin 131 System Degasser 157 Carbon Flat Braids and Sleeves PE Vacuum-Hose 88 Levelling Additive 157 Design Fabrics PU Vacuum-Hose 88 Polyester Resin Systems Light Stabilizer / Yellowing Inhibitor 157 Overview Aramid Fabric 33 Spiral Tube for Vacuum Infusion 89 Overview Polyester Resin Aramid Fabrics and tapes MTI -Hose 89 UP-Resin Orthopthalic-based Tools / Accessories Overview Hybrid Fabric 36 Blade Runner UP-Resin ISO-NPG-based Degasser Roller Table of Content Hybrid Fabrics Overview Glass Fabrics Glass Filament Fabrics -Silane- Glass Filament Fabrics -Finish- Glass Filament Fabric Tapes Glass Sleeves and Flat Braids Overview Glass Roving Fabrics Glass Roving Fabrics Tube Clip Squeezee Tube Clip Squeezer MTI -Valve IQS-Connectors Standard Connectors POM Vac Checker Standard Manometer Vacuum Pump Polyester Resin Gelcoat Polyester Resin Topcoat MEKP-Hardener Colour / Coating In-Mould-Coating 2K PUR Top Coat Colour Pastes Laminating Roller Sets Replacement- / Foam Rollers Agitator, Mixing Cups, Scissors Plastic Bottles, Jerrycans Plastic Valves, Gloves...for Carbon Coatings Table of Content Overview Chopped Strand Mats Chopped Strand Mats Combo Mats C-Glass Non Woven Printed Glass Non Woven Mould Making Fabric Glass Staple Fabric Overview Multiaxial Glass Fabrics Multiaxial Glass Fabrics Sandwichmaterial 3D Core TM Soric SF / LRC und Coremat Epoxy Resin Systems Overview Epoxy Resin Epoxy Priming Resin and Sealing Epoxy Mould Covering Resin Epoxy Adhesive Resin Adhesive- / Laminating Resin Standard Laminating Resin High Strength Thermosetting Resin Injection Resin Resin System with a Statement of Approval of the German Lloyd Covering Resin System Casting Resin Mould Release Agents Overview Mould Release Agents Mould Release Agent Priming Wax Film Release Agent Carnauba Wax Release Agent for IMC / MTI Cleanser / Thinner Acetone XB-Thinner In-Mould-Thinner for GfK-Repairing...for Moulding Ordering Information Ordering Information, Delivery terms Your customer number always ready to hand Vacuum Technology Overview Vacuum Infusion Overview Pondbuilding Covering Resin System Fillers / Additives Overview Fillers _ 2 phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 3

3 Sandwich Material Reinforcement Fabrics Overview Carbon Fabrics Carbon fibres have versatile usable properties. The main motive for the development of carbon fibres has come from the aerospace industry with its need for a material with a combination of high strength, high stiffness and low weight. These high-tenacity (HT) fibres provide excellently balanced mechanical laminate properties. Without carbon fibres many constructive solutions for aerospace would never have been possible. In the energy industry, these reinforcing fibres are used to the realization of wind turbines and fuel cell technology for high-pressure gas tank and gas diffusion, used for oil exploration in risers and for the reprocessing of nuclear fuel in a centrifuge. In medical technology, there are carbon-fiber back into Xray tables, prostheses and fixators. Industrial applications include rollers for the paper and printing industries, as well as optical and structural components in the automotive industry. For applications in the area of leisure are sports equipment (tennis racket, golf club shafts, bicycle frames, masts for sailing boats, surfboards, helmets, fishing rods) and musical instruments The applications of carbon fibres are very diverse! Overview CARBON FABRICS page Article weight g/m² weave style threads/cm / yarn type Tex yarn type Tex thickness mm HP-P68C 68 5,0 x 5,0 1K-67 1K-67 0, HP-P80C HP-P96C HP-P120C HP-S120C HP-T150C HP-P160C HP-T160C HP-P195C HP-T195C HP-P200C Atlas 1/4 Twill 2/2 Twill 2/2 Twill 2/2 6,0 x 6,0 7,0 x 7,0 9,0 x 9,0 9,0 x 9,0 12,0 x 10,0 4,0 x 4,0 4,0 x 4,0 4,8 x 4,8 4,8 x 4,8 5,0 x 5,0 1K-67 1K-67 1K-67 1K-67 1K-67 3K-200 3K-200 3K-200 3K-200 3K-200 1K-67 1K-67 1K-67 1K-67 1K-67 3K-200 3K-200 3K-200 3K-200 3K-200 0,12 0,13 0,16 0,16 0,20 0,27 0,30 0,30 0,30 0,30 Mould Release Agent Colours / Coatings Mould and Casting Epoxy Resins Vacuum Technology The Most Important Fabric s: the simplest weave very slip-resistant bad drapability suitable for flat plates or easy moulds Twill diagonally running lines are characteristic better drapability than plain weave less slip-resistant suitable for complicated geometries Satin suitable for complicated geometries very good drapability low slip-resistance less mesh crossing, therefore strength in the laminate leaves a very smooth surface 7 8 HP-P200/0250C HP-T200C Twill 2/2 5,0 x 5,0 5,0 x 5,0 3K-200 3K-200 3K-200 3K-200 0,30 0,32 11 HP-U215C 215 UD 2,5 x 1,6 12K-800 0,2 Thermoplast fixation HP-T217C 217 x-twill 3/1 5,2 x 5,2 3K-200 3K-200 0, HP-T240C 245 Twill 2/2 6,0 x 6,0 3K-200 3K-200 0,35 10 HP-T240CE EP-Binder 245 Twill 2/2 6,0 x 6,0 3K-200 3K-200 0,35 10 HP-T240/125CE Thermoplast fixation 245 Twill 2/2 6,0 x 6,0 3K-200 3K-200 0,35 11 HP-P250C HP-P285C HP-T285C HP-T286C HP-S285C HP-T287C Twill 2/2 Twill 4/4 Atlas 1/4 Twill 2/2 6,0 x 6,25 7,0 x 7,0 7,0 x 7,0 7,0 x 7,0 7,0 x 7,0 3,5 x 3,5 3K-200 3K-200 3K-200 3K-200 3K-200 6K-400 3K-200 3K-200 3K-200 3K-200 3K-200 6K-400 0,33 0,38 0,43 0,43 0,45 0,47 HP-P300C 300 3,7 x 3,7 6K-400 6K-400 0,42 HP-U315C 315 UD 3,65 x 1,6 12K-800 0,3 12 Thermoplast fixation HP-T370C HP-S372C HP-P375C HP-T400C HP-P400C HP-T421C x-twill 3/1 Atlas 1/4 x-twill 3/1 Twill 2/2 4,6 x 4,6 2,3 x 2,3 2,3 x 2,3 5,0 x 5,0 2,5 x 2,5 2,6 x 2,6 6K K K-800 6K K K-800 6K K K-800 6K K K-800 0,61 0,61 0,63 0,60 0,64 0,64 Tools / Accessories Fillers / Additives Cleanser / Thinner 13 HP-P460C HP-T460C HP-P600C HP-T600C HP-T660C Twill 2/2 Twill 2/2 Twill 2/2 2,8 x 2,8 2,8 x 2,8 3,7 x 3,7 3,7 x 3,7 4,1 x 4,1 12K K K K K K K K K K-800 0,70 0,73 0,85 0,85 0,93 These articles, as well as different weights, constructions and widths are available upon request! 4 phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 5

4 Mould and Casting Epoxy Resins Vacuum Technology Sandwich Material Reinforcement Fabrics Carbon Fabrics 1K Article: HP-P80C from 1m² 67,70 56,89 from 3m² 64,90 54,54 62,95 52,90 59,65 56,66 54,66 50,13 47,61 45,93 on request Sandwich construction, model making, thin coatings, boat constructions, carbon design, airplane model construction. Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 96g/m², laminate thickness: 0,13mm, laminate weight: 176g/m² Article: HP-P96C from 1m² 69,97 58,80 from 3m² 68,50 57,56 65,39 54,95 62,23 58,89 56,99 52,29 49,49 47,89 on request Sandwich construction, thin coatings, carbon design. Tight mesh due to the use of fine yarn and a high number of threads. 80 g/m² 100 cm 6 y./cm 6 y./cm Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 111g/m², laminate thickness: 0,11mm, laminate weight: 1111g/m² Carbon Fabrics 3K 160g/m² Article: HP-P160C : 100cm from 1m² 22,49 18,90 from 3m² 18,92 15,90 17,81 14,97 16,54 15,29 13,98 13,49 13,90 12,85 11,75 11,34 Article: HP-T160C Twill : 100cm Model making, boat construction, motor sport, sports equipment. HT- / 1K 67tex 93 g/m² 100 cm 7 y./cm 7 y./cm HT- / 1K 67tex 160 g/m² 100 cm / Twill 4 y./cm 4 y./cm Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 192g/m², laminate thickness: 0,26mm, laminate weight: 352g/m² HT- / 3K 200tex Carbon Fabrics 3K 195g/m² Article: HP-P195C : 100cm from 1m² 24,95 20,97 from 3m² 21,30 17,90 19,99 16,80 18,79 17,40 16,30 15,40 15,79 14,62 13,70 12,94 Article: HP-T195C Twill : 100cm Model making, boat construction, motor sport, sports equipment. 195 g/m² 100 cm / Twill 4,8 y./cm 4,8 y./cm Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 234g/m², laminate thickness: 0,31mm, laminate weight: 429g/m² Carbon Fabrics 3K 200g/m² Article: HP-P200C : 100cm from 1m² 26,95 22,65 from 3m² 22,49 18,90 20,99 17,64 19,50 17,79 16,60 15,80 16,39 14,95 13,95 13,28 Article: HP-P200/0250C : 25cm from 1m² 27,97 23,50 from 3m² 23,68 19,90 21,99 18,48 20,69 18,98 17,79 16,99 17,39 15,95 14,95 14,28 HT- / 3K 200tex 200 g/m² 25 cm / 100cm 5 y./cm 5 y./cm Model making, boat construction, motor sport, sports equipment. Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 240g/m², laminate thickness: 0,32mm, laminate weight: 440g/m² HT- / 3K 200tex Colours / Coatings Mould Release Agent Cleanser / Thinner Fillers / Additives Tools / Accessories 6 phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 7

5 Mould and Casting Epoxy Resins Vacuum Technology Sandwich Material Reinforcement Fabrics Carbon Fabrics 3K 200g/m² Article: HP-T200C Twill : 100cm from 1m² from 3m² 26,95 22,65 22,49 18,90 20,99 17,64 19,50 16,39 17,79 14,95 16,60 13,95 15,80 13,28 Carbon Fabrics 3K 245g/m² Model making, boat construction, motor sport, sports equipment. Article: HP-T240C Twill : 100cm from 1m² 29,99 25,20 from 3m² 27,25 22,90 24,97 20,98 23,50 21,60 19,99 18,92 19,75 18,15 16,80 15,90 Article: HP-T200/120C Twill : 120cm from 1m² from 3m² from 120m² 28,20 23,70 25,59 21,50 23,59 19,82 22,19 18,65 20,85 17,52 19,50 16,39 18,20 15,29 Ideal for Carbonlook Model making, boat construction, motor sport, sports equipment. Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 240g/m², laminate thickness: 0,32mm, laminate weight: 440g/m² 245 g/m² 100 / 127 cm Twill 6 y./cm 6 y./cm Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 288g/m², laminate thickness: 0,39mm, laminate weight: 528g/m² HT- / 3K 200tex Article: HP-T240/125C Twill : 127cm from 1m² from 3m² from 127m² 200 g/m² 100 cm / 120 cm Twill 5 y./cm 5 y./cm HT- / 3K 200tex 29,99 25,20 27,25 22,90 24,97 20,98 23,50 19,75 21,60 18,15 19,99 16,80 18,92 15,90 Carbon Fabrics 3K 245g/m² - Special s - Model making, boat construction, motor sport, sports equipment. Article: HP-T240/050C Twill : 50cm from 1m² 29,99 25,20 from 3m² 27,25 22,90 24,97 20,98 23,50 21,60 19,99 18,92 19,75 18,15 16,80 15,90 + For smaller and / or elongated components, e.g. snowboards, car parts + Simple handling Ideal for Carbonlook 245 g/m² 50 / 150 cm Twill 6 y./cm 6 y./cm Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 288g/m², laminate thickness: 0,39mm, laminate weight: 528g/m² HT- / 3K 200tex engine cowlings Article: HP-T240/150C Twill : 150cm from 1m² 31,99 26,88 from 3m² 28,98 24,35 27,25 22,90 from 150m² 24,97 23,56 21,90 20,11 20,98 19,80 18,40 16,90 + For wide and / or large components, e.g. engine cowlings Tools / Accessories Fillers / Additives Cleanser / Thinner Mould Release Agent Colours / Coatings 8 phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 9

6 Epoxy Resins Vacuum Technology Sandwich Material Reinforcement Fabrics Carbon Fabrics 3K 245g/m² Model making, boat construction, motor sport, sports equipment. Article: HP-T240CE Twill : 100cm from 1m² 41,53 34,90 from 3m² 37,96 31,90 35,40 29,75 33,30 31,50 29,45 27,49 27,98 26,47 24,75 23,10 This Carbon Fabric is equipped one-sided with an EP-binder. (EP-Binder approx g/m²) + no frazzle when cutting + you can preform the fabric with heat Back with EP-Binder slippage resistant Ideal for Carbonlook 245 g/m² 125 cm Twill 6 y./cm 6 y./cm HT- / 3K 200tex Article: HP-T240/125CE Twill : 125cm from 1m² 37,96 31,90 from 3m² 34,90 29,33 31,99 26,88 from 125m² 30,35 28,50 26,78 24,99 25,50 23,95 22,50 21,00 This Carbon Fabric is equipped onesided with a thermoplast fixation. + no frazzle when cutting + no points, which will be market on the fabric/laminate + better drapable than HP-T240CE Back with Thermoplast Carbon Fabrics 3K 285g/m² Article: HP-T286C from 1m² 38,68 32,50 from 3m² 36,83 30,95 31,95 26,85 30,45 28,44 25,94 24,87 25,59 23,90 21,80 20,90 Model making, motor sports, boat construction, sports equipment, carbon design. Ideal for complex geometries 285 g/m² 100 / 125cm Twill 4/4 7 y./cm 7 y./cm Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 342g/m², laminate thickness: 0,46mm, laminate weight: 627g/m² Carbon Fabrics 12K Unidirectional -Thermoplast fixation- This Carbon-Fabric is due to the special manner of preparation very hard-wearing and easy to handle. Shiftings are almost impossible because of the thermosetting ((Hotmelt-fibre in ). No frazzle when cut. HT- / 3K 200tex Colours / Coatings Mould Release Agent Cleanser / Thinner Fillers / Additives Mould and Casting Article: HP-U215C from 1m² 15,95 13,40 from 3m² 15,59 13,10 14,88 12,50 13,45 12,38 11,25 10,59 11,30 10,40 9,45 8,90 Model making, boat construction, motor sport, sports equipment, Sandwich construction, Orthopedic technology approx. 215 g/m² 100 cm Unidirectional 0 2,5 y./cm 1,6 y./cm HT- 12K 800tex E-Glass / Hotmelt Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 258g/m², laminate thickness: 0,35mm, laminate weight: 473g/m² Tools / Accessories 10 phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 11

7 Reinforcement Fabrics Sandwich Material Carbon Fabrics 12K Uniderectional -Thermoplast fixation- Article: HP-U315C from 1m² 22,49 18,90 from 3m² 21,30 17,90 19,75 16,60 17,79 16,30 14,88 13,92 14,95 13,70 12,50 11,70 Model making, boat construction, motor sport, sports equipment, Sandwich construction, Orthopedic technology approx. 315 g/m² 100 cm Unidirectional 0 3,65 y./cm 1,6 y./cm HT- 12K 800tex E-Glass / Hotmelt Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 378g/m², laminate thickness: 0,51mm, laminate weight: 693g/m² Carbon Fabrics 12K 600g/m² Article: HP-T600C from 1m² 35,58 29,90 from 3m² 31,99 26,88 29,99 25,20 28,50 27,25 25,99 24,95 23,95 22,90 21,84 20,97 Model making, motor sports, boat construction, sports equipment, carbon design. 600 g/m² 100 cm Twill 3,7 y./cm 3,7 y./cm Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 720g/m², laminate thickness: 0,96mm, laminate weight: 1320g/m² Carbon Roving HT- / 12K 800tex Colours / Coatings Mould Release Agent Mould and Casting Epoxy Resins Vacuum Technology Carbon Fabrics 12K approx. 400g/m² Article: HP-P400C from 1m² 25,99 21,84 from 3m² 22,59 18,98 21,30 17,90 19,98 18,39 16,90 16,48 16,79 15,45 14,20 13,85 Article: HP-T421C from 1m² 25,99 21,84 from 3m² 22,59 18,98 21,30 17,90 19,98 18,39 16,90 16,48 16,79 15,45 14,20 13,85 Model making, boat construction, motor sport, sports equipment. Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 480g/m², laminate thickness: 0,64mm, laminate weight: 880g/m² Model making, motor sports, boat construction, sports equipment, carbon design. 420 g/m² 100 cm Twill 2,6 y./cm 2,6 y./cm Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 530g/m², laminate thickness: 0,67mm, laminate weight: 924g/m² 400 g/m² 100 cm 2,5 y./cm 2,5 y./cm HT- / 12K 800tex HT- / 12K 800tex This 50K fibre strand is with single filaments more than twice as heavy and wide as the conventional 24K fibre. Therefore, the price-performance ratio ( /Kg) is very interesting. Article: HP-HT-50K /roll 50m (188g) 12,97 10,90 Basic price/100g 6,90 5,79 100m (375g) Basic price/100g 250m (938g) Basic price/100g 1500m (5,6kg) Basic price/100g 23,68 19,90 6,31 5,30 41,53 34,90 4,42 3,72 190,28 159,90 3,28 2,70 : Panex 35 Density: 1,81 g/m³ Tensile Modulus: 241 GPa Diameter 7,2 µm Filament count: = 50K : approx. 3,75 g/m hand laminating, winding and pultrusion Tools / Accessories Fillers / Additives Cleanser / Thinner 12 phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 13

8 Mould and Casting Epoxy Resins Vacuum Technology Sandwich Material Reinforcement Fabrics Overview Spread Tow Carbon Fabrics The Spread-Tow-Carbon-Fabric is a fabric with spreaded fibres. It is very thin through the spreading of the single filaments but nevertheless the fabric is very closed. You achieve an increased strength and a lower resin consumption because of the low fibre bending. It is ideal for design applications because of its unique carbon look. page Article weight g/m² weave style threads/cm / yarn type Tex yarn type Tex strand width mm 15 HP-P64S25C 64 0,4 x 0,4 12K 12K HP-T64S25C HP-P80S20C HP-T80S20C HP-P100S16C HP-T100S16C HP-P160S15C HP-P160S25C HP-T160S15C HP-P161SC HP-T161SC HP-P193C HP-T193C HP-P201SC HP-T201SC Twill 2/2 Twill 2/2 Twill 2/2 Twill 2/2 Twill 2/2 Twill 2/2 Twill 2/2 0,4 x 0,4 0,5 x 0,5 0,5 x 0,5 0,6 x 0,6 0,6 x 0,6 0,66 x 0,66 0,4 x 0,4 0,66 x 0,66 4 x 4 4 x 4 1,2 x 1,2 1,2 x 1,2 5 x 5 5 x 5 12K 12K 12K 12K 12K 15K 15K 15K 3K 3K 12K 12K 3K 3K 12K 12K 12K 12K 12K 15K 15K 15K 3K 3K 12K 12K 3K 3K ,5 2,5 8,3 8,3 2 2 These articles, as well as different weights, constructions and widths are available upon request! Spread Tow Carbon Fabrics Article: HP-P64S25C from 1m² 63,90 53,70 from 3m² 59,98 50,40 54,98 46,20 from 63,5m² 51,77 49,92 45,82 43,50 41,95 38,50 Spread Tow Carbon Fabric strand width: approx. 25mm High-strength, thin laminates, Model making, motor sports, sports equipment. Construktion 64 g/m² approx. 127 cm 0,4 y./cm 0,4 y./cm Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 77g/m², laminate thickness: 0,10mm, laminate weight: 141g/m² Article: HP-P80S20C from 1m² 61,64 51,80 from 3m² 57,95 48,70 53,49 44,95 49,92 48,49 44,49 41,95 40,75 37,39 Spread Tow Carbon Fabric strand width: approx. 20mm High-strength, thin laminates, Model making, motor sports, sports equipment. Construktion HT- / 12K 80 g/m² approx. 102 cm 0,5 y./cm 0,5 y./cm Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 96g/m², laminate thickness: 0,13mm, laminate weight: 176g/m² Article: HP-P100S16C from 1m² from 3m² s and availability upon request Spread Tow Carbon Fabric strand width: approx. 16mm High-strength, thin laminates, Model making, motor sports, sports equipment. Construktion HT- / 12K 100 g/m² 102 cm 0,6 y./cm 0,6 y./cm Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 120g/m², laminate thickness: 0,16mm, laminate weight: 220g/m² HT- / 12K Colours / Coatings Mould Release Agent Fillers / Additives Cleanser / Thinner Tools / Accessories 14 phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 15

9 Epoxy Resins Vacuum Technology Sandwich Material Reinforcement Fabrics Spread Tow Carbon Fabrics Article: HP-P161SC from 1m² 29,74 24,99 from 3m² 27,67 23,25 25,59 21,50 24,10 22,49 20,59 20,25 18,90 17,30 Spread Tow Carbon Fabric strand width: approx. 2,5mm High-strength, thin laminates, Model making, motor sports, sports equipment. Construktion 160 g/m² 100 / 125 cm 4 y./cm 4 y./cm Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 192g/m², laminate thickness: 0,26mm, laminate weight: 352g/m² Article: HP-T161SC from 1m² from 3m² Spread Tow Carbon Fabric strand width: approx. 2,5mm High-strength, thin laminates, Model making, motor sports, sports equipment. HT- / 3K 160 g/m² 100 / 125 cm Construktion Twill 2/2 4 y./cm 4 y./cm Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 192g/m², laminate thickness: 0,26mm, laminate weight: 352g/m² Article: HP-P193C from 1m² from 3m² 29,74 24,99 27,67 23,25 25,59 21,50 24,10 20,25 22,49 18,90 19,87 16,70 28,50 23,95 26,89 22,60 25,59 21,50 Spread Tow Carbon Fabric strand width: approx. 8,3mm Construktion HT- / 3K 193 g/m² 127 cm 1,2 y./cm Overview Multiaxial Carbon Fabrics Non-woven Multiaxial Carbon Fabrics are textile structures. Their fibres are endless and located parallel to each other. They are fixed together with a sewing thread or with thermosetting. Many areas increase their competitiveness by using the advantages of multiaxial fabrics, whether in aerospace, boat building or motor sports. Quality features epoxy, polyester and vinylester resin Better mechanical properties Good wet out and lower resin consumption Load oriented fibre orientation Applications + 45 Boat construction Sportsequiment Motor sports - 45 Motor blades Mould and tank construction Page Article weight g/m² construction fibre stitch type width cm 18 HP-U030/60C 30 0 HT- 24K Carbon HP-U050/50C 50 0 HT- 50K or 24K Carbon HP-U080/50C 80 0 HT- 50K or 24K Carbon HP-U100/50C HT- 50K or 24K Carbon HP-U158/122C HT- 50K Carbon Tricot HP-U200/60C HT- 50K Carbon Tricot HP-U300/61C HT- 50K Carbon Tricot HP-U500/123C HT- 50K Carbon Tricot HP-B205C / 90 HT- 50K Carbon Tricot HP-B412C / 90 HT- 50K Carbon Tricot HP-B060C / -45 HT- 24K Carbon Franse HP-B080C / -45 HT- 24K Carbon Franse HP-B100C / -45 HT- 24K Carbon Franse HP-B141C / -45 HT- 24K Carbon Franse HP-B200C / -45 HT- 12K o. 50K Carbon Franse Fillers / Additives Cleanser / Thinner Mould Release Agent Colours / Coatings Mould and Casting from 127m² 23,68 19,90 21,99 18,48 21,30 17,90 on request Model making, motor sports, carbon design. Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 232g/m², laminate thickness: 0,31mm, laminate weight: 425g/m² Article: HP-T193C from 1m² 31,65 26,60 from 3m² 29,99 25,20 28,32 23,80 26,66 24,87 23,21 22,40 20,90 19,50 from 127m² on request Spread Tow Carbon Fabric strand width: approx. 8,3mm Model making, motor sports, carbon design. Construktion 1,2 y./cm HT- / 12K 193 g/m² 127 cm Twill 1,2 y./cm 1,2 y./cm Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 232g/m², laminate thickness: 0,31mm, laminate weight: 425g/m² HT- / 12K 22 HP-B305C / -45 HT- 50K Carbon Franse HP-B415C / -45 HT- 50K Carbon Franse HP-B600C / -45 HT- 50K Carbon Franse HP-T300C / -45 / 0 HT- 50K Carbon Tricot HP-T450C / -45 / 0 HT- 50K Carbon Tricot HP-Q305C /-45 /90 /+45 HT- 50K Carbon Tricot HP-Q600C /-45 /90 /+45 HT- 50K Carbon Tricot 127 HP-Q810C /-45 /90 /+45 HT- 50K Carbon Tricot 127 These articles, as well as different weights, constructions and widths are available upon request! Tools / Accessories 16 phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 17

10 Mould and Casting Epoxy Resins Vacuum Technology Sandwich Material Reinforcement Fabrics Carbon Fabric Unidirectional 0 - Thermofixed - Article: HP-U030/50C from 1m² 15,35 12,90 from 3m² 14,64 12,30 13,92 11,70 12,97 11,78 10,59 9,40 10,90 9,90 8,90 7,90 Model making, motor sports, boat construction, sports equipment. Calculated data for hand laminate with 45 vol. % fibres: resin consumption: 23,7g/m², laminate thickness: 0,04mm, laminate weight: 53,7g/m² Article: HP-U050/50C from 1m² 10,70 8,99 from 3m² 10,12 8,50 9,76 8,20 8,93 8,27 7,74 7,08 7,50 6,95 6,50 5,95 Model making, motor sports, boat construction, sports equipment. Calculated data for hand laminate with 45 vol. % fibres: resin consumption: 39,5g/m², laminate thickness: 0,06mm, laminate weight: 89,5g/m² Article: HP-U080/50C from 1m² 11,31 9,50 from 3m² 10,65 8,95 10,35 8,70 9,51 8,75 8,21 7,74 7,99 7,35 6,90 6,50 Model making, motor sports, boat construction, sports equipment. Calculated data for hand laminate with 45 vol. % fibres: resin consumption: 65g/m², laminate thickness: 0,10mm, laminate weight: 145g/m² Article: HP-U100/50C from 1m² 11,78 9,90 from 3m² 11,29 9,49 10,69 8,98 9,88 9,10 8,45 8,03 8,30 7,65 7,10 6,75 Model making, motor sports, boat construction, sports equipment. 30 g/m² 50 or 60 cm Unidirectional g/m² Calculated data for hand laminate with 45 vol. % fibres: resin consumption: 80g/m², laminate thickness: 0,12mm, laminate weight: 180g/m² HT- / 24K 50 g/m² 50 cm Unidirectional g/m² HT- / 50K or 24K 80 g/m² 50 cm Unidirectional g/m² HT- / 50K or 24K 100 g/m² 50 cm Unidirectional g/m² HT- / 50K or 24K Carbon Fabric Unidirectional 0 Article: HP-U158/122C from 1m² 11,78 9,90 from 3m² 11,29 9,49 10,69 8,98 9,88 8, ,8 g/m² (E-Glass) 9,10 7,65 Model making, motor sports, 8,45 7,10 boat construction, sports equipment, mould and tank cons- from 122m² 7,97 6,70 truction, masts, rotor blades. HT- / 50K Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 190g/m², laminate thickness: 0,25mm, laminate weight: 348g/m² Article: HP-U200/60C 200 g/m² 61 cm from 1m² 15,41 12,95 from 3m² 14,88 12,50 Unidirectional 0 14,16 11, g/m² 12,97 10,90 11,78 9,90 Model making, motor sports, from 61m² 10,53 8,85 boat construction, sports equipment, mould and tank construction, masts, rotor blades. HT- / 50K Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 240g/m², laminate thickness: 0,32mm, laminate weight: 440g/m² Article: HP-U300/61C 300 g/m² 61 cm from 1m² 22,49 18,90 from 3m² 21,30 17,90 Unidirectional 0 20,11 16, g/m² 18,92 15,90 17,20 14,45 Model making, motor sports, HT- / 50K from 61m² 15,17 12,75 boat construction, sports equipment, mould and tank construction, masts, rotor blades. Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 360g/m², laminate thickness: 0,48mm, laminate weight: 660g/m² Article: HP-U500/123C 158 g/m² 122 cm Unidirectional g/m² 500 g/m² 123 cm from 1m² 29,39 24,70 from 3m² 28,20 23,70 Unidirectional 0 27,07 22, g/m² 24,75 20,80 23,21 19,50 Model making, motor sports, from 61,5m² 21,66 18,20 boat construction, sports equipment, mould and tank construction, masts, rotor blades. HT- / 50K Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 600g/m², laminate thickness: 0,80mm, laminate weight: 1100g/m² Colours / Coatings Mould Release Agent Cleanser / Thinner Fillers / Additives Tools / Accessories 18 phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 19

11 Mould and Casting Epoxy Resins Vacuum Technology Sandwich Material Reinforcement Fabrics! Carbon Fabric Bidirectional 0 /90 Article: HP-B205C from 1m² 19,64 16,50 from 3m² 17,73 14,90 16,54 13,90 15,35 12,90 13,69 11,50 from 63,5m² 12,85 10,80 Article: HP-B412C Carbon Fabric Bidiagonal +45 /-45 Article: HP-B060C* from 1m² 27,25 22,90 from 3m² 25,95 21,81 24,40 20,50 22,49 18,90 20,83 17,50 from 63,5m² 18,92 15,90 Very light and good drapability! Model making, motor sports, boat construction, sports equipment, mould and tank construction. Calculated data for hand laminate with 40 vol. % fibres: resin consumption: 194g/m², laminate thickness: 0,28mm, laminate weight: 394g/m² from 1m² 30,82 25,90 from 3m² 28,44 23,90 26,42 22,20 24,63 20,70 21,66 18,20 from 63,5m² 20,11 16,90 Model making, motor sports, boat construction, sports equipment, mould and tank construction. Calculated data for hand laminate with 40 vol. % fibres: resin consumption: 400g/m², laminate thickness: 0,58mm, laminate weight: 810g/m² Model making, sport equipment, motor sport, automotive industry. 60 g/m² 127 cm Bidiagonal +45 / g/m² g/m² Calculated data for hand laminate with 40 vol. % fibres: resin consumption: 58,1g/m², laminate thickness: 0,08mm, laminate weight: 118g/m² * Due to the low weight of HP-B060C, HP-B080C, HP-B100C and HP-B141C, gaps on the fabrics are possible. Such gaps do not constitute from bad quality. 200 g/m² 127 cm Bidirectional 0 / g/m² g/m² HT- / 50K 400 g/m² 127 cm Bidirectional 0 / g/m² g/m² HT- / 50K HT- / 24K * Due to the low weight of HP-B060C, HP-B080C, HP-B100C and HP-B141C, gaps on the fabrics are possible. Such gaps do not constitute from bad quality.!!!! Article: HP-B080C* from 1m² 27,25 22,90 from 3m² 25,95 21,81 24,40 20,50 22,49 18,90 20,83 17,50 from 63,5m² 18,92 15,90 Very light and good drapability! Model making, sport equipment, motor sport, automotive industry. Calculated data for hand laminate with 40 vol. % fibres: resin consumption: 85g/m², laminate thickness: 0,1mm, laminate weight: 173g/m² Article: HP-B100C* 80 g/m² 127 cm Bidiagonal +45 / g/m² g/m² 100 g/m² 127 cm from 1m² 24,87 20,90 from 3m² 23,68 19,90 Bidiagonal +45 /-45 22,49 18, g/m² 20,83 17, g/m² 18,92 15,90 Model making, sport equipment, motor sport, automo- HT- / 24K 17,73 14,90 from 63,5m² tive Very light and good drapability! industry, boat building. Calculated data for hand laminate with 40 vol. % fibres: resin consumption: 97g/m², laminate thickness: 0,1mm, laminate weight: 197g/m² Article: HP-B141C* HT- / 24K 140 g/m² 127 cm from 1m² 24,87 20,90 from 3m² 23,68 19,90 Bidiagonal +45 /-45 22,49 18, g/m² 20,83 17, g/m² 18,92 15,90 Model making, motor sports, boat HT- / 24K 17,73 14,90 from 63,5m² construction, sports equipment, mould Very light and good drapability! and tank construction. Calculated data for hand laminate with 40 vol. % fibres: resin consumption: 136g/m², laminate thickness: 0,2mm, laminate weight: 276g/m² Article: HP-B200C from 1m² 19,64 16,50 from 3m² 17,73 14,90 16,54 13,90 15,35 12,90 13,69 11,50 from 63,5m² 12,85 10,80 Very light and good drapability! Model making, motor sports, boat construction, sports equipment, mould and tank construction, rotor blades. 200 g/m² 127 cm Bidiagonal +45 / g/m² g/m² Calculated data for hand laminate with 40 vol. % fibres: resin consumption: 194g/m², laminate thickness: 0,28mm, laminate weight: 394g/m² HT- / 50K Tools / Accessories Fillers / Additives Cleanser / Thinner Mould Release Agent Colours / Coatings 20 phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 21

12 Vacuum Technology Sandwich Material Reinforcement Fabrics Article: HP-B305C from 1m² from 3m² from 63,5m² Very light and good drapability! Model making, motor sports, boat construction, sports equipment, mould and tank construction. Calculated data for hand laminate with 40 vol. % fibres: resin consumption: 290g/m², laminate thickness: 0,42mm, laminate weight: 590g/m² Article: HP-B415C from 1m² from 3m² from 63,5m² 22,49 18,90 21,50 18,07 20,41 17,15 18,68 15,70 17,49 14,70 16,42 13,80 23,74 19,95 22,49 18,90 21,99 18,48 19,99 16,80 18,74 15,75 17,49 14,70 Model making, motor sports, boat construction, sports equipment, mould and tank construction. 300 g/m² 127 cm Bidiagonal +45 / g/m² g/m² Calculated data for hand laminate with 40 vol. % fibres: resin consumption: 586g/m², laminate thickness: 0,85mm, laminate weight: 1191g/m² HT- / 50K 410 g/m² 127 cm Bidiagonal +45 / g/m² g/m² HT- / 50K Article: HP-T450C from 1m² from 3m² from 63,5m² Article: HP-Q305C Model making, motor sports, boat construction, sports equipment, mould and tank construction. Calculated data for hand laminate with 40 vol. % fibres: resin consumption: 436g/m², laminate thickness: 0,63mm, laminate weight: 886g/m² Carbon Fabric Quadraxial 0 /-45 /90 /+45 from 1m² from 3m² from 63,5m² 32,73 27,50 30,35 25,50 28,44 23,90 25,94 21,80 24,40 20,50 22,49 18,90 22,49 18,90 21,50 18,07 20,41 17,15 18,68 15,70 17,49 14,70 16,42 13,80 Model making, motor sports, boat construction, sports equipment, mould and tank construction. 450 g/m² 127 cm Triaxial +45 /-45 /0 +45 /-45 each 150 g/m² g/m² Calculated data for hand laminate with 40 vol. % fibres: resin consumption: 290g/m², laminate thickness: 0,42mm, laminate weight: 590g/m² HT- / 50K 300 g/m² 127cm Quadraxial 0 /-45 /90 /+45 0 /90 each 75g/m² +45 /-45 each 75g/m² HT- / 50K epoxy- & polyester resin Cleanser / Thinner Mould Release Agent Colours / Coatings Mould and Casting Epoxy Resins Article: HP-B600C from 1m² from 3m² from 63,5m² Carbon Fabric Triaxial +45 /-45 /0 Article: HP-T300C from 1m² 31,89 26,80 30,82 25,90 28,95 24,33 27,25 22,90 24,87 20,90 23,21 19,50 Model making, motor sports, boat construction, sports equipment, mould and tank construction. 600 g/m² 127 cm Bidiagonal +45 / g/m² g/m² HT- / 50K Calculated data for hand laminate with 40 vol. % fibres: resin consumption: 387g/m², laminate thickness: 0,56mm, laminate weight: 787g/m² 22,49 18, g/m² 127 cm Article: HP-Q600C from 1m² from 3m² from 63,5m² 35,58 29,90 33,92 28,50 32,73 27,50 29,63 24,90 27,25 22,90 25,59 21,50 Model making, motor sports, boat construction, sports equipment, mould and tank construction. 600 g/m² 127cm Quadraxial 0 /-45 /90 /+45 0 /90 each 150g/m² +45 /-45 each 150g/m² Calculated data for hand laminate with 40 vol. % fibres: resin consumption: 581g/m², laminate thickness: 0,84mm, laminate weight: 1181g/m² HT- / 50K epoxy- & polyester resin Tools / Accessories Fillers / Additives from 3m² from 63,5m² 21,50 18,07 20,41 17,15 18,68 15,70 17,49 14,70 16,42 13,80 wind energy, sports equipment making, ship and boat construction, motor sport, aircraft construction. Triaxial +45 /-45 /0 +45 /-45 each 100 g/m² g/m² Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 360g/m², laminate thickness: 0,48mm, laminate weight: 660g/m² HT- / 50K 22 phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 23

13 Sandwich Material Reinforcement Fabrics Carbon Fabric Tapes (Thermoset) Due to the special manner of preparation the unidirectional Carbon-Fabric-Tapes are very hard-wearing and easy to handle. Shiftings are almost impossible because of the thermosetting. Carbon fibres have a high tensile strength, a low specific weight, low breaking elongation and a high temperature resistance. They have a higher strength than most metals and other fibre composites. The elongation of CRP is elastic, the fatigue resistance and vibration damping is excellent. 315g/m² 2,5cm, 4cm, 5cm, 10cm Unidirectional 0 HT-Faser / 12K 800tex Tanks, pipes, hulls Model making Boat construction Sport equipment Repairs & reinforcements Carbon Standard Tapes Our Fabric-Tapes are manufactured on high-performance ribbon looms up to a width of 100mm. Other weights, constructions or other widths are available by request. Fields of application: Tanks, pipes, hulls Model making Boat construction Sport equipment Repairs & reinforcements page Article weight g/m² threads/cm / yarn type Tex yarn type Tex 25 HP-U125C/ ,0 / 3,5x2 3K-200 EC HP-U125C/ ,0 / 3,5x2 3K-200 EC HP-U175C/ ,0 / 4x2 3K-200 EC width mm Mould Release Agent Colours / Coatings Vacuum Technology Article: HP-U315C/025 : 2,5 cm Lenght: 50 lfm /roll from 1 roll 52,00 43,50 1,04 0,87 Article: HP-U315C/040 : 4 cm Lenght: 50 lfm /roll from 1 roll 82,50 69,50 1,65 1,39 26 HP-U175C/ ,0 / 4x2 3K-200 EC HP-U175C/ ,0 / 4x2 3K-200 EC HP-U225C/ ,0 / 3,5x2 6K-400 EC HP-U225C/ ,0 / 3,5x2 6K-400 EC HP-U225C/ ,0 / 3,5x2 6K-400 EC HP-U340C/ ,2 / 1,6 12K-800 EC HP-U340C/ ,2 / 1,6 12K-800 EC HP-U340C/ ,2 / 1,6 12K-800 EC Cleanser / Thinner Epoxy Resins from 2 rolls from 5 rolls from 10 rolls 47,00 39,50 0,94 0,79 42,00 35,50 0,84 0,71 37,50 31,50 0,75 0,63 from 2 rolls from 5 rolls from 10 rolls 75,00 63,00 1,50 1,26 68,00 57,00 1,36 1,14 59,50 50,00 1,19 1,00 27 HP-U340C/ ,2 / 1,6 12K-800 EC HP-U525C/ ,2 / 4x2 12K-800 EC HP-U525C/ ,2 / 4x2 12K-800 EC HP-U525C/ ,2 / 4x2 12K-800 EC HP-P202C/ ,0 / 5,0 3K-200 3K HP-P202C/ ,0 / 5,0 3K-200 3K HP-P305C/ ,5 / 2x2 6K-400 6K Fillers / Additives 28 HP-P305C/ ,5 / 2x2 6K-400 6K Mould and Casting Article: HP-U315C/050 : 5 cm Lenght: 50 lfm /roll from 1 roll 94,00 79,00 1,88 1,58 from 2 rolls from 5 rolls from 10 rolls 84,50 71,00 1,69 1,42 75,00 63,00 1,50 1,26 68,50 57,50 1,37 1,15 Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 378g/m², laminate thickness: 0,51mm, laminate weight: 693g/m² Article: HP-U315C/100 : 10 cm Lenght: 50 lfm Article: HP-U125C/025 /roll from 1 roll 169,00 142,00 3,38 2,84 from 2 rolls from 5 rolls from 10 rolls 160,00 134,50 3,20 2,69 141,00 118,50 2,82 2,37 127,00 106,50 2,54 2,13 Different weights, constructions and widths are available upon request! 125g/m² / 25mm / 0 /roll 5 m 10 m 25 m 50 m 100 m 9,24 7,76 1,85 1,55 13,63 11,46 1,36 1,15 26,37 22,16 1,05 0,89 46,69 39,24 0,93 0,78 76,76 64,50 0,77 0,65 Article: HP-U125C/ g/m² / 50mm / 0 /roll 5 m 10 m 25 m 50 m 100 m 13,11 11,02 2,62 2,20 20,64 17,35 2,06 1,73 42,51 35,72 1,70 1,43 77,13 64,81 1,54 1,30 132,09 111,00 1,32 1,11 Tools / Accessories 24 phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 25

14 Reinforcement Fabrics Sandwich Material Carbon Standard Tapes 175g/m² Unidirektional Article: HP-U175C/ g/m² / 25mm / 0 /roll 5 m 10 m 25 m 50 m 100 m 9,99 8,39 2,00 1,68 14,99 12,60 1,50 1,26 29,50 24,79 1,18 0,99 52,58 44,19 1,05 0,88 87,47 73,50 0,87 0,74 Article: HP-U175C/ g/m² / 50mm / 0 /roll 5 m 10 m 25 m 50 m 100 m 14,74 12,38 2,95 2,48 23,58 19,82 2,36 1,98 49,28 41,41 1,97 1,66 89,89 75,54 1,80 1,51 155,30 130,50 1,55 1,31 Article: HP-U175C/ g/m² / 100mm / 0 /roll 5 m 10 m 25 m 50 m 100 m 23,61 19,84 4,72 3,97 39,64 33,31 3,96 3,33 86,24 72,47 3,45 2,90 159,59 134,11 3,19 2,68 282,03 237,00 2,82 2,37 Carbon Standard Tapes 340g/m² Unidirektional Article: HP-U340C/ g/m² / 25mm / 0 /roll 5 m 10 m 25 m 50 m 100 m 10,23 8,59 2,05 1,72 16,17 13,59 1,62 1,36 32,87 27,62 1,31 1,10 54,18 45,53 1,08 0,91 93,30 78,40 0,93 0,78 Article: HP-U340C/ g/m² / 40mm / 0 /roll 5 m 10 m 25 m 50 m 100 m 12,91 10,85 2,58 2,17 21,30 17,90 2,13 1,79 45,05 37,86 1,80 1,51 75,42 63,38 1,51 1,27 133,28 112,00 1,33 1,12 Article: HP-U340C/ g/m² / 50mm / 0 /roll 5 m 10 m 25 m 50 m 100 m 14,83 12,46 2,97 2,49 24,96 20,97 2,50 2,10 53,75 45,17 2,15 1,81 90,59 76,13 1,81 1,52 161,84 136,00 1,62 1,36 Colours / Coatings Mould Release Agent Vacuum Technology Carbon Standard Tapes 225g/m² Unidirektional Article: HP-U225C/ g/m² / 25mm / 0 /roll 5 m 10,86 9,13 2,17 1,83 Article: HP-U225C/ g/m² / 50mm / 0 /roll 5 m 16,36 13,75 3,27 2,75 Article: HP-U225C/ g/m² / 100mm / 0 /roll 5 m 26,98 22,67 5,40 4,53 Article: HP-U340C/ g/m² / 100mm / 0 /roll 5 m 10 m 23,79 19,99 4,76 4,00 42,03 35,32 4,20 3,53 Cleanser / Thinner Epoxy Resins 10 m 25 m 50 m 100 m 16,57 13,93 1,66 1,39 33,14 27,85 1,33 1,11 59,45 49,96 1,19 1,00 99,96 84,00 1,00 0,84 10 m 25 m 50 m 100 m 26,52 22,29 2,65 2,23 56,05 47,10 2,24 1,88 102,65 86,26 2,05 1,73 178,50 150,00 1,79 1,50 10 m 25 m 50 m 100 m 45,74 38,44 4,57 3,84 100,30 84,29 4,01 3,37 186,10 156,39 3,72 3,13 330,23 277,50 3,30 2,78 25 m 50 m 100 m 94,36 79,29 3,77 3,17 161,39 135,63 3,23 2,71 295,12 248,00 2,95 2,48 Fillers / Additives Mould and Casting Carbon Standard Tapes 525g/m² Unidirektional Article: HP-U525C/ g/m² / 25mm / 0 /roll 5 m 10 m 11,49 9,65 2,30 1,93 17,70 14,88 1,77 1,49 Article: HP-U525C/ g/m² / 50mm / 0 /roll 5 m 10 m 17,36 14,59 3,47 2,92 28,33 23,81 2,83 2,38 Article: HP-U525C/ g/m² / 100mm / 0 /roll 5 m 10 m 28,61 24,04 5,72 4,81 48,68 40,91 4,87 4,09 Tools / Accessories 25 m 50 m 100 m 35,74 30,04 1,43 1,20 64,36 54,09 1,29 1,08 108,89 91,50 1,09 0,92 25 m 50 m 100 m 60,21 50,60 2,41 2,02 110,51 92,86 2,21 1,86 192,78 162,00 1,93 1,62 25 m 50 m 100 m 107,07 89,97 4,28 3,60 198,86 167,11 3,98 3,34 353,43 297,00 3,53 2,97 26 phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 27

15 Sandwich Material Reinforcement Fabrics Carbon Standard Tapes 205g/m² Article: HP-P202C/ g/m² / 50mm / /roll 5 m 10 m 25 m 50 m 100 m 18,11 15,22 3,62 3,04 29,69 24,95 2,97 2,49 63,34 53,22 2,53 2,13 116,40 97,81 2,33 1,96 203,49 171,00 2,03 1,71 Article: HP-P202C/ g/m² / 100mm / Leinwand /roll 5 m 10 m 25 m 50 m 100 m 29,60 24,88 5,92 4,98 50,49 42,43 5,05 4,24 111,23 93,47 4,45 3,74 206,72 173,71 4,13 3,47 367,71 309,00 3,68 3,09 Carbon Flat Braid Carbon braided tapes are an excellent alternative to conventional carbon fiber tapes. Due to the special braiding technique, the application width is variable. By stretching or gathering together the width can be changed. Ideally, the fiber angle should be between 30 and 60. Optimal torsion and shear strengths without complex cutting are therefore possible. The carbon fibre sleeves are well suitable for applications with epoxy or polyester resins. You can find more detailed information on our product data sheet. Our carbon braided tapes are always offered and sold in stretched condition, since it is technically not possible to wrap the tapes with a fiber angle of 45. Please note that the length changes depending on the fibre angle. Article material HT- number of ENDS width at 45 mm area of application mm HP-BFC035/65/1 1K 67tex HP-BFC063/65/3 3K 200tex Mould Release Agent Colours / Coatings Epoxy Resins Vacuum Technology Carbon Standard Tapes 205g/m² Article: HP-P305C/ g/m² / 50mm / /roll 5 m 10 m 25 m 50 m 21,11 17,74 4,22 3,55 35,11 29,51 3,51 2,95 75,83 63,72 3,03 2,55 139,96 117,61 2,80 2,35 Article: HP-P305C/ g/m² / 100mm / Leinwand /roll 5 m 10 m 25 m 50 m 35,23 29,60 7,05 5,92 60,66 50,98 6,07 5,10 134,66 113,16 5,39 4,53 250,90 210,84 5,02 4,22 Article: HP-BFC035/65/1 Article: HP-BFC063/65/3 /roll 5 m 10 m 25 m 50 m 100 m 31,86 26,75 6,37 5,36 54,60 45,90 5,46 4,59 118,79 99,75 4,75 3,99 225,98 190,00 4,52 3,80 435,24 366,00 4,35 3,66 /roll 5 m 10 m 25 m 50 m 100 m 27,38 23,00 5,48 4,60 46,20 38,80 4,62 3,88 102,31 86,00 4,09 3,44 187,53 157,50 3,75 3,15 356,36 299,00 3,56 2,99 Fillers / Additives Cleanser / Thinner Mould and Casting 100 m 246,33 207,00 2,46 2, m 448,04 376,50 4,48 3,77 Tools / Accessories 28 phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 29

16 Mould and Casting Epoxy Resins Vacuum Technology Sandwich Material Reinforcement Fabrics Carbon Braided Sleeve Carbon braided sleeves are ideal for the production of tubes and also for prostheses in orthopedic technology. Another major area of application is spar- or hollow structures in vehicles, sports equipment and boat building. The carbon fibre sleeves are well suitable for applications with epoxy or polyester resins. The diameter of the braided sleeves can be varied by stretching. Ideally, the fiber angle should be between 30 and 60. Optimal torsion and shear strengths are achieved at an angle of 45. You can find more detailed information on our product data sheet. Our carbon braided sleeves are always offered and sold in stretched condition, since it is technically not possible to wrap the hoses with a fiber angle of 45. As a guideline, a length change of approx % is possible. Example: straight carbon sleeve approx. 100m / at 45 length of approx. 75m Article material HT- /roll 5 m 10 m 25 m 50 m 100 m number of ENDS diameter at 45 mm area of application ø mm HP-BSC009/40/1 1K 67tex 40 9, HP-BSC018/32/6 6K 400tex HP-BSC035/96/3 3K 200tex HP-BSC062/144/3 3K 200tex HP-BSC156/144/12 12K 800tex Article: HP-BSC009/40/1 /roll 5 m 10 m 25 m 50 m 100 m 24,40 20,50 4,88 4,10 38,50 32,35 3,85 3,24 81,89 68,82 3,28 2,75 143,96 120,97 2,88 2,42 257,62 216,49 2,58 2,16 Article: HP-BSC035/96/3 Article: HP-BSC62/144/3 35,62 29,93 7,12 5,99 58,81 49,42 5,88 4,94 128,65 108,11 5,15 4,32 229,53 192,88 4,59 3,86 412,57 346,70 4,13 3,47 /roll 5 m 10 m 25 m 50 m 100 m 44,55 37,44 8,91 7,49 79,06 66,44 7,91 6,64 179,89 151,17 7,20 6,05 333,30 280,08 6,67 5,60 599,40 503,70 5,99 5,04 Article: HP-BSC018/32/6 /roll 5 m 10 m 25 m 50 m 100 m Article: HP-BSC156/144/12 /roll 5 m 10 m 25 m 50 m 100 m 21,75 18,30 4,35 3,66 33,70 28,30 3,37 2,83 71,00 59,50 2,84 2,38 124,00 104,00 2,48 2,08 221,00 186,00 2,21 1,86 102,98 86,54 20,60 17,31 189,28 159,06 18,93 15,91 452,68 380,40 18,11 15,22 843,41 708,75 16,87 14, , ,35 16,27 13,67 Design-Fabric Our design fabrics have been specially developed for design applications to create unique, refined and particularly fascinating surface coatings. Due to the twill weave they are good drapable and smooth. Therefore, it is suitable for flat components, roundings and complex geometries. Typical fields of application: Design application, car- & motorcycling components, skis, kite-, long-, snow- and kickboards, furniture and furnishing parts, safety helmets and much more. Carbon-Design-Fabric Article: HP-T405CER red magic carbon width: 100cm from 1m² from 3m² 70,81 59,50 68,90 57,90 65,33 54,90 61,76 51,90 58,19 48,90 55,81 46,90 on request Polyester-Design-Fabric Article: HP-T199PB blue width: 120cm from 1m² from 3m² 10,59 8,90 9,98 8,39 9,40 7,90 8,93 7,50 7,85 6,60 6,78 5,70 5,89 4,95 Article: HP-T405CEB blue magic carbon width: 100cm Special Features: A three-dimensional carbon look paired with noble coloured design. Due to the tight weaving it is on the one hand slip-resistant and on the other hand good drapable and cuddly. Article: HP-T199PG green width: 120cm Special Features: Cheap alternative to coloured Carbon Design Fabric with a weight of only 200g/m². Very flexible and supple and therefore, it adapts well to complicated geometries. Good impregnation properties with our low-viscosity epoxy systems HP-E25D or HP-E40D. approx. 405 g/m² 100 cm Twill 6/6 6 Fd./cm 18 Fd./cm Design red magic carbon blue magic carbon Article: HP-T199PR red width: 120cm 200 g/m² 120 cm Twill 2/2 6 Fd./cm 8,7 Fd./cm Design blue, green, red Tools / Accessories Fillers / Additives Cleanser / Thinner Mould Release Agent Colours / Coatings 30 phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 31

17 Sandwich Material Reinforcement Fabrics 3D-Design-Fabric The 3D-Design-Fabrics are the most newly developed glass fabric, with dyed colours and one sided metallised glass fabric twill weave. Components which are refined with this 3D-Design fabric, will get a unique 3 dimensional metallic appearance. The 3D-Design-Fabrics are very smooth, has a good drapability and slip-resistance. Article: HP-T300EA from 1m² 17,79 14,95 15,89 13,35 14,49 12,97 11,29 9,98 12,18 10,90 9,49 8,39 approx. 300 g/m² 100 cm Twill 2/2 7 Fd./cm 7 Fd./cm Design alustyle Overview Aramid Fabric Aramid fibres are characterized by a high tenacity, a very good impact strength and abrasion resistance. Further properties are e.g. a good dampening ability, excellent chemical resistance and non-flammability. Working with the raw fabric and the laminates is often hard and therefore it is recommended to use special tools. page Article weight g/m² weave style threads/cm / yarn type Tex yarn type Tex thickness mm HP-P36A 36 8,0 x 8, ,10 34 HP-P60A 61 13,5 x 13, ,12 HP-P75A 75 8,7 x 8, ,15 Mould Release Agent Colours / Coatings Epoxy Resins Vacuum Technology Article: HP-TP200EA from 1m² 18,98 15,95 from 3m² 17,79 14,95 16,96 14,25 15,70 13,91 11,89 13,19 11,69 9,99 Design 200 g/m² 127 cm Twill / 17,4 Fd./cm 12 Fd./cm aluminum rhombus HP-T110A HP-P110A HP-P115A HP-P120A HP-P158A HP-M160A HP-P160A HP-T160A HP-P163A HP-T171A HP-P170A HP-T172A HP-T170A HP-T174A HP-T195A Twill 2/2 Mesh 101 Twill 2/2 Atlas 1/7 Twill 2/2 X-Twill 3/1 Twill 2/2 Twill 2/2 13,0 x 13,0 13,4 x 13,4 13,4 x 13,4 8,0 x 6,0 9,0 x 5,5 5,0 x 5,0 5,0 x 5,0 5,0 x 5,0 6,5 x 6,5 19,0 x 19,0 6,5 x 6,5 5,2 x 5,2 6,5 x 6,5 5,0 x 5,0 6,0 x 6, , , ,20 0,18 0,20 0,20 0,28 0,50 0,30 0,30 0,29 0,30 0,29 0,30 0,32 0,35 0,35 Fillers / Additives Cleanser / Thinner HP-T220A 220 X-Twill 3/1 6,7 x 6, ,43 Mould and Casting Article: HP-TP200ET from 1m² 19,99 16,80 from 3m² 18,74 15,75 17,79 14,95 16,41 14,58 12,50 13,79 12,25 10,50 Design 200 g/m² 127 cm Twill / 17,4 Fd./cm 12 Fd./cm titanium rhombus 34 HP-P230A HP-T230A HP-T231A HP-M230A HP-P285A HP-P295A HP-T310A HP-S315A HP-T315A HP-S335A HP-S365A HP-P470A HP-T470A HP-P556A Twill 2/2 X-Twill 3/1 Mesh 101 Twill 2/2 Atlas 1/4 X-Twill 3/1 Atlas 1/4 Atlas 1/7 P 4/4 4-fdg. Twill 2/2 Panama 4/4 7,0 x 7,0 7,0 x 7,0 7,0 x 7,0 7,0 x 7,0 10,5 x 10,5 9,3 x 8,4 4,5 x 4,5 6,3 x 6,3 4,9 x 4,9 6,8 x 6,8 20,5 x 2,3 10,5 x 8,5 8,0 x 6,5 8,0 x 8, ,35 0,40 0,45 0,60 0,41 0,47 0,56 0,60 0,60 0,62 0,78 0,81 0,90 These articles, as well as different weights, constructions and widths are available upon request! Tools / Accessories 32 phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 33

18 Reinforcement Fabrics Sandwich Material Vacuum Technology Aramid Fabrics Article: HP-P60A from 1m² from 3m² 32,73 27,50 31,54 26,50 28,92 24,30 26,54 22,30 24,87 20,90 23,68 19,90 on request Sandwich construction, model making, aircraft construction, sports equipment, high-strength coating. Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 86g/m², laminate thickness: 0,12mm, laminate weight: 147g/m² Article: HP-T172A from 1m² from 3m² 23,68 19,90 21,99 18,48 19,99 16,80 18,45 15,50 16,54 13,90 15,35 12,90 13,98 11,75 Sandwich construction, model making, aircraft construction, sports equipment, high-strength coating. 61 g/m² cm 13,5 y./cm 13,5 y./cm Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 240g/m², laminate thickness: 0,34mm, laminate weight: 410g/m² Aramid 22tex 170 g/m² 100 cm Twill 5,2 y./cm 5,2 y./cm Aramid 158tex Aramid Tapes Our Fabric-Tapes are manufactured on high-performance ribbon looms up to a width of 100mm. Other weights, constructions or other widths are available by request. Article weight g/m² construction material threads/cm / width cm length m HP-P171A/ Aramid 121tex 7 / 3,5x2 2,5 100 HP-P171A/ Aramid 121tex 7 / 3,5x HP-P171A/ Aramid 121tex 7 / 3,5x Article: HP-P171A/025 Article: HP-P171A/050 Article: HP-P171A/100 /roll 5 m 10 m 25 m 50 m 100 m 9,99 8,39 2,00 1,68 14,99 12,60 1,50 1,26 29,50 24,79 1,18 0,99 52,58 44,19 1,05 0,88 87,47 73,50 0,87 0,74 /roll 5 m 10 m 25 m 50 m 100 m 14,36 12,07 2,87 2,41 22,90 19,25 2,29 1,92 47,72 40,10 1,91 1,60 86,94 73,06 1,74 1,46 149,94 126,00 1,50 1,26 /roll 5 m 10 m 25 m 50 m 100 m 22,61 19,00 4,52 3,80 37,83 31,79 3,78 3,18 82,08 68,97 3,28 2,76 151,74 127,51 3,03 2,55 267,75 225,00 2,68 2,25 Colours / Coatings Mould Release Agent Cleanser / Thinner Epoxy Resins Mould and Casting Article: HP-P170A from 1m² from 3m² Sandwich construction, model making, aircraft construction, sports equipment, high-strength coating. Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 240g/m², laminate thickness: 0,34mm, laminate weight: 410g/m² Article: HP-T310A from 1m² from 3m² 23,68 19,90 21,99 18,48 19,99 16,80 18,45 15,50 16,54 13,90 15,35 12,90 13,98 11,75 28,50 23,95 26,89 22,60 25,59 21,50 23,68 19,90 21,30 17,90 19,99 16,80 18,98 15,95 Sandwich construction, model making, aircraft construction, sports equipment, high-strength coating. 170 g/m² 100 cm 6,7 y./cm 6,7 y./cm Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 456g/m², laminate thickness: 0,61mm, laminate weight: 767g/m² Aramid 121tex 310 g/m² 100 cm Twill 4,5 y./cm 4,5 y./cm Aramid 322tex Special Offers Many greatly reduced items can be found in our online store under the heading Special Items or follow this QR-Code: 40% Aramid Fabric 60g/m² 25% 40% Carbon Fabric 40% 285g/m² Twill 4/4 Hybrid Fabric 205g/m² Twill Glas Fabric 1250g/m² Triaxial Fillers / Additives Tools / Accessories 34 phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 35

19 Mould and Casting Epoxy Resins Vacuum Technology Sandwich Material Reinforcement Fabrics Overview Hybrid Fabric Hybrid Fabrics combine the good properties of the Carbon Fabrics with the ones of the Aramid Fabrics. Through the Carbon s the fabric gets a high stiffness and the Aramid s give the fabric a high impact strength, tensile strength, capacity and wear resistance. page Article weight g/m² weave style threads/cm / yarn type Tex HP-P71AC 71 6,5 x 6,5 1K Carbon - 67 Kevlar HP-P96AC x 10 1K Carbon - 67 Kevlar HP-P163AC 163 4,4 x 4,4 3K Carbon Aramid 158 HP-P165AC 165 4,6 x 4,6 3K Carbon Aramid 161 yarn type Tex These articles, as well as different weights, constructions and widths are available upon request! thickness mm HP-P167AC 165 4,0 x 5,0 3K Carbon Aramid 158 0,35 37 HP-P180AC 180 5,0 x 5,0 3K Carbon Kevlar HP-T205AC 205 Twill 2/2 6,0 x 6,0 3K Carbon Kevlar HP-T207AC 205 Twill 2/2 5,0 x 6,0 3K Carbon Aramid 158 0,35 HP-T210AC 210 Twill 3/1 6,5 x 6,0 3K Carbon Kevlar HP-T240AC 240 Twill 2/2 6,7 x 6,7 3K Carbon Kevlar HP-T600AC 600 Twill 2/2 6,6 x 6,6 12K Carbon Kevlar K Carbon - 67 Kevlar K Carbon - 67 Kevlar K Carbon Aramid 158 3K Carbon Aramid 161 3K Carbon Kevlar K Carbon Kevlar K Carbon Kevlar K Carbon Kevlar K Carbon Kevlar ,14 0,18 0,30 0,30 0,31 0,35 0,37 0,40 0,90 Hybrid Fabrics Article: HP-P163AC from 1m² from 3m² Article: HP-P180AC Model making, sports equipment, boat construction. Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 210g/m², laminate thickness: 0,29mm, laminate weight: 375g/m² from 1m² from 3m² Sandwich construction, model making, aircraft construction, sports equipment, high-strength coating. Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 230g/m², laminate thickness: 0,32mm, laminate weight: 410g/m² Article: HP-T205AC from 1m² from 3m² 18,99 15,96 17,49 14,70 15,80 13,28 14,90 12,52 13,98 11,75 12,97 10,90 11,84 9,95 22,49 18,90 19,99 16,80 18,45 15,50 17,49 14,70 16,60 13,95 15,35 12,90 14,22 11,95 23,68 19,90 20,94 17,60 19,40 16,30 18,45 15,50 17,49 14,70 16,60 13,95 15,35 12,90 Sandwich construction, model making, aircraft construction, sports equipment, high-strength coating. 180 g/m² 100 cm 4,9 y./cm 4,9 y./cm Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 260g/m², laminate thickness: 0,36mm, laminate weight: 465g/m² 163 g/m² 100 cm 4,4 y./cm 4,4 y./cm Carbon 3K 200tex Aramid 158tex HT- / 3K 200tex Aramid 158tex 205 g/m² 100/120 cm Twill 5,5 y./cm 5,5 y./cm HT- / 3K 200tex Aramid 158tex Tools / Accessories Fillers / Additives Cleanser / Thinner Mould Release Agent Colours / Coatings 36 phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 37

20 Reinforcement Fabrics Overview Glass Filament Fabric Glass-Filament-Fabrics are weaved panels consisting of endless E-Glass-Yarn. The glass yarn is a spinning thread which is provided with a slight turning (approx turnings per meter). Glass fibre threads consist of several glass yarns which are twisted together. The properties of textile glass materials as reinforcing materials are determined by the fineness and sizing of the spinning thread. The sizing of the thread is a thin coating based on chrome or silane compounds. It is applied with an application roll while the pulling process. Overview Glass Filament Fabric - Silane - page Article weight g/m² weave style threads/cm / yarn type Tex yarn type Tex cm HP-P80E HP-T80E HP-P110E HP-T110E Twill 2/2 Twill 2/2 12 x 11,5 12 x 11,5 16 x x 15 EC6-34 EC6-34 EC6-34 EC6-34 EC6-34 EC6-34 EC6-34 EC Colours / Coatings Mould and Casting Epoxy Resins Vacuum Technology Sandwich Material The mechanical basic features (e.g. tensile strength, tensile moduls of elasticity, elongation at break) are determined by the glass type, the application and the sizing of the thread. These include smoothness and sliding ability while processing with the textiles, the compatibility of the glass surfaces and the resin matrix and hereby the implementation of the mechanical basic features onto the composite material. E-Glass Description Glasstype Density kg/dm³ Softening temperature C Comparison: Silane / Finish Preparation Tensilstrength MPa Silane The sizing is applied during the production of the yarn on the basis of a universal Silane bonding agent. Silane fabrics need no further treatment and are directly applicable in the fibre composite. Properties Good mechanical properties in the laminate Transparent laminates Low Print Very cheap EP and UP resin Good impregnation of the fibre Applications boat building sport equipments vehicle industrie model and mould components Elasticity modul GPa Elongation % Finish Thermal conductivity W(m.K) E-Glas 2,59-2, ,5-4 0,15 The fabric is first prepared from a textile fibreglass. Thereafter, the textile glass sizing is burned. And then a special bonding agent, the so-called finish is applied. The finish consists of a bifunctional chemical compound. This compound optimized on the one hand the binding to the resin and on the other hand to the fibre. Very good mechanical properties in the laminate Very transparent laminates Low Print Very high-quality Very suitable for EP and UP resin Outstanding impregnation of the fibre Very low dust during cutting For the first layer(s) after the mold cover layer, since they not stand out from the surface. boat building sport equipments vehicle industrie model and mould components wood and venner coatings HP-P163E HP-T163E HP-T211E HP-P220E HP-P280E HP-T280E HP-P390E HP-T390E HP-S430E HP-S660E Twill 2/2 Twill 2/2 Twill 2/2 Twill 2/2 Satin 4/3 Satin 8/3 12 x 11,5 12 x 11,5 19 x x 4,8 7 x 7 7 x 7 7,5 x 6,8 7,5 x 6,8 20,0 x 10,0 16,0 x 16,0 EC9-68 EC9-68 EC9-68 EC EC EC EC EC EC9-68 EC9-68 EC9-68 EC9-68 EC9-68 EC EC EC EC EC EC9-68 EC Overview Glass Filament Fabric - Finish - page Article weight g/m² weave style threads/cm / yarn type Tex yarn type Tex cm 44 HP-P25EF x 19,5 EC5-5,5 EC5-5, HP-P49EF HP-P50EF HP-T72EF HP-P78EF HP-P80EF HP-P100EF HP-T100EF HP-P160EF HP-P163EF HP-T163EF HP-T194EF HP-P200EF HP-U220EF HP-P280EF HP-T280EF HP-S300EF HP-P330EF Twill 2/2 Twill 2/2 Twill 2/2 Twill 2/2 UD / Twill 2/2 8 Satin 20 x 22 23,5 x 18,5 16 x x x x x 23 6 x 5,5 11,8 x 12 11,8 x x x 11,8 6 x 7 7 x 7 7 x 7 22 x 21,4 6,5 x 6,5 EC5-11 EC5-11 EC7-22 EC7-22 EC9-34 EC7-22 EC7-22 2x EC9-68 EC9-68 EC9-68 EC9-68 EC9-68 5x EC9-68 3x EC9-68 3x EC9-68 EC9-68 5x EC9-68 EC5-11 EC5-11 EC7-22 EC5-11 EC9-34 EC7-22 EC7-22 EC9-136 EC9-68 EC9-68 EC9-68 EC9-68 EC7-22 EC EC EC9-68 3x EC / Tools / Accessories Fillers / Additives Cleanser / Thinner Mould Release Agent HP-P390EF HP-T390EF HP-U445EF HP-S440EF HP-HD1000EF Twill 2/2 UD / 8 Satin HD- 6 x 6,7 6 x 6,7 28,5 x 6,3 6 x 8,5 22,4 x 14 5x EC9-68 5x EC9-68 EC x EC9-68 2x EC9-136 EC EC EC9-68 EC x EC These articles, as well as different weights, constructions and widths are available upon request! 38 phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 39

21 Mould and Casting Epoxy Resins Vacuum Technology Sandwich Material Reinforcement Fabrics Glass Filament Fabrics -Silane- Article: HP-P80E : 100cm from 1m²* 3,21 2,70 3,00 2,52 2,78 2,36 1,82 1,56 2,34 1,98 1,53 1,31 from 1m²* 3,46 2,91 3,24 2,72 3,00 2,53 1,96 1,68 2,52 2,13 1,65 1,41 Sandwich construction, model making, boat construction, thin coatings. Sandwich construction, model making, boat construction, thin coatings. * Up to 2,5m² the article will be delivered folded. From 3m² on a roll. Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 71g/m², laminate thickness: 0,09mm, laminate weight: 157g/m² Article: HP-P110E : 100cm Article: HP-T80E Twill : 100cm Article: HP-T110E Twill : 100cm 105 g/m² 100 cm / Twill 16 y./cm 15 y./cm Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 86g/m², laminate thickness: 0,12mm, laminate weight: 191g/m² Sizing Sizing 86 g/m² 100 cm / Twill 12 y./cm 11,5 y./cm Silane epoxy- & polyester resin Silane epoxy- & polyester resin Glass Filament Fabrics -Silane- Article: HP-P163E : 100cm from 1m²* 3,36 2,82 3,13 2,63 2,90 2,46 1,90 1,59 2,44 2,07 1,60 1,34 Article: HP-T211E 213 g/m² 120 cm from 1m²* 4,00 3,36 3,74 3,14 Twill 3,46 2,91 19 y./cm 2,93 2,46 12 y./cm 2,26 1,90 Sandwich construction, model making, thin coatings, boat construc- Sizing Silane from 120m² 1,93 1,62 tions, vehicle parts, mould and tank epoxy- & polyester resin construction, sports equipment. Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 175g/m², laminate thickness: 0,23mm, laminate weight: 388g/m² Article: HP-P220E Article: HP-T163E Twill : 100cm Sandwich construction, model making, thin coatings, boat constructions, motorsports, mould and tank construction. * Up to 2,5m² the article will be delivered folded. From 3m² on a roll. Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 136g/m², laminate thickness: 0,18mm, laminate weight: 302g/m² 166 g/m² 100 cm / Twill 12 y./cm 11,5 y./cm 224 g/m² 100 cm from 1m²* 3,64 3,06 3,40 2,86 3,15 2,65 12 y./cm 2,67 2,24 4,8 y./cm 2,06 1,73 Sandwich construction, model making, thin coatings, boat construc- Sizing Silane 1,76 1,48 tions, vehicle parts, mould and tank epoxy- & polyester resin construction, sports equipment. Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 184g/m², laminate thickness: 0,25mm, laminate weight: 408g/m² Sizing Silane epoxy- & polyester resin Tools / Accessories Fillers / Additives Cleanser / Thinner Mould Release Agent Colours / Coatings 40 phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 41

22 Sandwich Material Reinforcement Fabrics Glass Filament Fabrics -Silane- Article: HP-P280E : 100cm from 1m²* 4,71 3,96 4,40 3,70 3,77 3,17 3,14 2,64 2,67 2,24 Article: HP-T280E Twill : 100cm Sports equipment, boat construction, tank and mould construction, vehicle parts, model making. * Up to 2,5m² the article will be delivered folded. From 3m² on a roll. Sizing 282 g/m² 100 cm / Twill 7 y./cm 7 y./cm Silane epoxy- & polyester resin Glass Filament Fabrics -Silane- Article: HP-S430E from 1m²* 7,76 6,52 6,79 5,71 5,82 4,89 4,86 4,08 4,27 3,59 3,88 3,26 Boat construction, model making, tank and mould construction, vehicle parts. * Up to 2,5m² the article will be delivered folded. From 3m² on a roll. 420 g/m² 100 cm Satin 4/3 20 y./cm 10 y./cm Calculated data for hand laminate with 40 vol. % fibres: resin consumption: 280g/m², laminate thickness: 0,40mm, laminate weight: 700g/m² Sizing Silane epoxy- & polyester resin Mould Release Agent Colours / Coatings Vacuum Technology 2,27 1,91 Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 232g/m², laminate thickness: 0,31mm, laminate weight: 514g/m² Mould and Casting Epoxy Resins Epoxidharze im Bootsbau PRAXISTIPPS - WERKSTOFFE AUCH FÜR SCHWERE SEE - Tools / Accessories Fillers / Additives Article: HP-P390E : 100cm Article: HP-T390E Twill : 100cm 390 g/m² 100 cm INSTRUCTIONS / VIDEOS BOAT BUILDING On our website in the Video & Download Portal you ll find various work instructions and tutorials for free around the theme of Epoxy resins in boat building. Learn the basics of coating and refurbishment of boats from the correct selection of materials up to the structure of the coating. Cleanser / Thinner from 1m²* 4,96 4,17 4,63 3,89 4,30 3,61 3,64 3,06 3,15 2,65 2,85 2,39 Sports equipment, boat construction, tank and mould construction, vehicle parts, model making. / Twill 7,5 y./cm 6,8 y./cm Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 320g/m², laminate thickness: 0,43mm, laminate weight: 710g/m² Sizing Silane epoxy- & polyester resin You ll reach the instruction comfortably over this QR-Code, or on our website under the category downloads. 42 phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 43

23 Reinforcement Fabrics Sandwich Material Vacuum Technology Glass Filament Fabrics -Finish- Article: HP-P25EF from 1m²* 3,21 2,70 3,00 2,52 2,78 2,34 2,36 1,98 19,5 y/cm 1,82 1,53 Boat construction, model making, tank and mould constructi- Sizing Finish from 103m² 1,56 1,31 from 127m² on, vehicle parts, circuit boards, epoxy- & polyester resin wing coatings, veneer coatings. Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 24g/m², laminate thickness: 0,04mm, laminate weight: 49g/m² Article: HP-P49EF * Up to 2,5m² the article will be delivered folded. From 3m² on a roll. 25 g/m² 103 cm 20 y/cm 49 g/m² 127 cm from 1m²* 3,21 2,70 3,00 2,52 2,78 2,34 20 y/cm 2,36 1,98 22 y/cm 1,82 1,53 Boat construction, model making, tank and mould constructi- Sizing Finish from 127m² 1,56 1,31 on, vehicle parts, circuit boards, wing coatings, veneer coatings. epoxy- & polyester resin Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 39g/m², laminate thickness: 0,05mm, laminate weight: 87g/m² Glass Filament Fabrics -Finish- Article: HP-P78EF from 1m²* from 127m² Boat constructions, model making, sandwich construction, thin coatings, sports equipment. Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 64g/m², laminate thickness: 0,09mm, laminate weight: 142g/m² Article: HP-P80EF from 1m²* 4,25 3,57 3,84 3,23 3,56 2,99 3,28 2,76 2,87 2,41 2,33 1,96 4,82 4,05 4,50 3,78 4,18 3,51 3,86 3,24 3,38 2,84 2,84 2,39 Sandwich construction, model making, thin coatings, GRP-panels. * Up to 2,5m² the article will be delivered folded. From 3m² on a roll. 78 g/m² 127 cm 23,6 y/cm 22 y/cm Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 67g/m², laminate thickness: 0,09mm, laminate weight: 148g/m² Sizing Sizing Finish epoxy- & polyester resin 81 g/m² 100 cm 12 y/cm 11 y/cm Finish epoxy- & polyester resin Colours / Coatings Mould Release Agent Cleanser / Thinner Epoxy Resins Article: HP-P50EF from 1m²* 4,82 4,05 4,50 3,78 4,18 3,51 49 g/m² 127 cm 23,5 y/cm Article: HP-P100EF : 127 cm Article: HP-T100EF Twill : 127cm 104 g/m² 127 cm / Twill 24 y/cm Fillers / Additives Mould and Casting 3,86 3,24 18,5 y/cm 3,38 2,84 Boat construction, model making, tank and mould constructi- Sizing Finish from 127m² 2,84 2,39 on, vehicle parts, circuit boards, epoxy- & polyester resin wing coatings, veneer coatings. Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 39g/m², laminate thickness: 0,05mm, laminate weight: 87g/m² Article: HP-T72EF from 1m²* 5,34 4,49 72 g/m² 127 cm from 1m²* from 127m² 4,82 4,05 4,50 3,78 4,18 3,51 3,86 3,24 3,38 2,84 2,73 2,29 Sandwich construction, model making, thin coatings, boat construction Sizing 23 y/cm Finish epoxy- & polyester resin Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 85g/m², laminate thickness: 0,11mm, laminate weight: 189g/m² Tools / Accessories from 127m² 4,75 3,99 4,43 3,72 3,88 3,26 3,44 2,89 2,92 2,45 Boat construction, model making, sandwich construction, thin coatings, sports equipment. Twill 16 y/cm 16 y/cm Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 64g/m², laminate thickness: 0,09mm, laminate weight: 142g/m² Sizing Finish epoxy- & polyester resin 44 phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 45

24 Epoxy Resins Vacuum Technology Sandwich Material Reinforcement Fabrics Glass Filament Fabrics -Finish- Article: HP-P160EF from 1m²* 5,34 4,49 4,75 3,99 4,43 3,88 3,44 2,92 3,72 3,26 2,89 2,45 Model making, boat construction, vehicle parts, hull coatings. Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 131g/m², laminate thickness: 0,18mm, laminate weight: 291g/m² Article: HP-P163EF : 100cm from 1m²* 5,34 4,49 4,75 3,99 4,43 3,88 3,44 2,96 3,72 3,26 2,89 2,49 Article: HP-T163EF Twill : 100cm Model making, sports equipment, boat construction, tank and mould construction, vehicle parts. * Up to 2,5m² the article will be delivered folded. From 3m² on a roll. 160 g/m² 100 cm 6 y/cm 5,5 y/cm Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 136g/m², laminate thickness: 0,18mm, laminate weight: 302g/m² Sizing Sizing Finish epoxy- & polyester resin 163 g/m² 100 cm / Twill 11,8 y/cm 12 y/cm Finish epoxy- & polyester resin Glass Filament Fabrics -Finish- Article: HP-P200EF from 1m²* 4,46 3,75 4,02 3,38 3,84 3,57 3,31 2,73 3,23 3,00 2,78 2,29 Model making, sports equipment, boat construction, tank and mould construction, vehicle parts. Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 169g/m², laminate thickness: 0,23mm, laminate weight: 375g/m² Article: HP-U220EF from 1m²* 6,49 5,45 5,94 4,99 5,65 4,95 4,39 3,95 4,75 4,16 3,69 3,32 Design of models, sports equipment, airfoil coating, rotor blades, sandwich components. Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 181g/m², laminate thickness: 0,24mm, laminate weight: 401g/m² Article: HP-P280EF : 100cm Article: HP-T280EF Twill : 100cm * Up to 2,5m² the article will be delivered folded. From 3m² on a roll. Sizing 206 g/m² 100/127 cm 17 y/cm 11,8 y/cm Finish epoxy- & polyester resin 220 g/m² 100 cm 0 6 y/cm 7 y/cm Sizing Finish epoxy- & polyester resin 280 g/m² 100 cm / Twill 7 y/cm Fillers / Additives Cleanser / Thinner Mould Release Agent Colours / Coatings 7 y/cm Mould and Casting Article: HP-T194EF from 1m²* 5,34 4,49 4,75 3,99 from 120m² from 127m² 4,43 3,88 3,44 2,96 3,72 3,26 2,89 2,49 Model making, sports equipment, boat construction, tank and mould construction, vehicle parts. 194 g/m² 120 / 127 cm Twill 14 y/cm 14 y/cm Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 160g/m², laminate thickness: 0,21mm, laminate weight: 354g/m² Sizing Finish epoxy- & polyester resin from 1m²* 6,49 5,45 5,94 4,99 5,65 4,95 4,39 3,87 4,75 4,16 3,69 3,25 Model making, sports equipment, boat construction, tank and mould construction, vehicle parts. Sizing Finish epoxy- & polyester resin Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 232g/m², laminate thickness: 0,31mm, laminate weight: 514g/m² Tools / Accessories 46 phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 47

25 Epoxy Resins Vacuum Technology Sandwich Material Reinforcement Fabrics Glass Filament Fabrics -Finish- Article: HP-S300EF from 1m²* Model making, sports equipment, boat construction, tank and mould construction, vehicle parts. Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 250g/m², laminate thickness: 0,33mm, laminate weight: 550g/m² from 1m²* 7,95 6,68 7,50 6,30 6,96 5,85 6,43 5,40 5,62 4,72 5,11 4,29 Article: HP-P390EF : 100cm 7,50 6,30 6,96 5,85 6,43 5,40 5,62 4,72 4,87 4,09 4,46 3,75 Article: HP-T390EF Twill : 100cm Model making, sports equipment, boat construction, tank and mould construction, vehicle parts. * Up to 2,5m² the article will be delivered folded. From 3m² on a roll. 300 g/m² 100 cm Satin 8 22 y/cm 21,4 y/cm Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 320g/m², laminate thickness: 0,43mm, laminate weight: 710g/m² Sizing Sizing Finish epoxy- & polyester resin 390 g/m² 100 cm / Twill 6 y/cm 6,7 y/cm Finish epoxy- & polyester resin! Glass Filament Fabrics -Finish- Article: HP-HD1000EF from 1m²* 22,50 18,91 20,90 17,56 19,99 18,45 16,99 16,80 15,50 14,28 on request Very good for complicate geometries and ambitious components! FORMENBAU mit Faserverbundwerkstoffen PRAXISTIPPS Die Herstellung einteiliger Formen Model making, motor sports, tank and mould construction g/m² 100 cm HD- 22,4 y/cm 14 y/cm Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 820g/m², laminate thickness: 1,10mm, laminate weight: 1800g/m² INSTRUCTION: Mould Making * Up to 2,5m² the article will be delivered folded. From 3m² on a roll. Sizing Finish epoxy- & polyester resin On our website in the Video & Download Portal you ll find various work instructions and tutorials for free around the theme of Mould Making. Learn the basics of the mould construction from the correct selection of materials up to the structure of the laminate. You ll reach the instruction comfortably over this QR-Code, or on our website under the category service. Fillers / Additives Cleanser / Thinner Mould Release Agent Colours / Coatings Mould and Casting! Article: HP-S440EF from 1m²* 8,20 6,89 7,60 6,39 6,99 6,49 5,69 5,45 5,87 5,45 4,78 4,58 Very good for complicate geometries and ambitious components! Model making, motor sports, tank and mould construction. 440 g/m² 100 cm Mock leno 6 y/cm 8,5 y/cm Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 360g/m², laminate thickness: 0,48mm, laminate weight: 800g/m² Sizing Finish epoxy- & polyester resin Also available from us: With this set you can create a master model of a positive or negative form. The materials are sufficient for small to medium sized moulds to about 1m². You can find it in the catalog on page 168 or in our online shop at Mould making with composite material FRP The starter set mould making Tools / Accessories 48 phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 49

26 Epoxy Resins Vacuum Technology Sandwich Material Reinforcement Fabrics Glass Filament Fabric Tapes -Silane- E-Glass s are the most versatile and widely used fibres of any reinforcement material. Different weigths and widths available upon request. Fields of application: Tanks, pipes, hulls Model making Boat construction Sport equipment Repairs Reinforcements Article: HP-P140/025E : 2,5 cm /roll from 1 roll 11,78 9,90 0,118 0,099 from 5 rolls from 10 rolls 140 g/m² 7,4 y./cm 6,5 y./cm Length: 100lfm Article: HP-P140/050E : 5 cm /roll from 1 roll 17,32 14,55 0,17 0,15 from 5 rolls from 10 rolls Length: 100lfm Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 115g/m², laminate thickness: 0,15mm, laminate weight: 255g/m² epoxy and polyester resins. 9,46 7,95 0,095 0,080 8,79 7,39 0,088 0,074 14,32 12,03 0,14 0,12 12,70 10,67 0,13 0,11 Glass Filament Fabric Tapes -Silane- 220 g/m² 6,0 y./cm 4,8 y./cm Article: HP-P220/020E Article: HP-P220/030E : 2 cm Length: 100 lfm : 3 cm Length: 100 lfm /roll /roll from 1 roll from 5 rolls from 10 rolls 10,59 0,106 8,63 0,086 7,85 0,079 8,90 0,089 7,25 0,073 6,60 0,066 from 1 roll from 5 rolls from 10 rolls 12,79 0,128 10,65 0,107 9,50 0,095 10,75 0,108 8,95 0,090 7,98 0,080 Article: HP-P220/080E Article: HP-P220/100E : 8 cm Length: 100 lfm : 10 cm Length: 130 lfm /roll /roll from 1 roll from 5 rolls from 10 rolls 30,33 0,30 25,85 0,26 22,47 0,23 25,49 0,26 21,72 0,22 18,88 0,19 from 1 roll from 5 rolls from 10 rolls 43,91 0,34 40,10 0,31 37,49 0,29 36,90 0,28 33,70 0,26 31,50 0,24 Article: HP-P220/050E : 5cm Length: 100 lfm /roll from 1 roll from 5 rolls from 10 rolls 18,96 0,19 16,15 0,16 14,04 0,14 15,93 0,16 13,57 0,14 11,80 0,12 Article: HP-P220/200E : 20 cm Length: 130 lfm /roll from 1 roll from 5 rolls from 10 rolls 81,99 0,63 79,61 0,61 76,76 0,59 68,90 0,53 66,90 0,52 64,50 0,50 Fillers / Additives Cleanser / Thinner Mould Release Agent Colours / Coatings Mould and Casting 144 g/m² 11 y./cm 10 y./cm Article: HP-P144/050E : 5 cm Length: 100lfm /roll from 1 roll 19,60 16,47 0,20 0,16 from 5 rolls 15,95 13,40 0,16 0,13 from 10 rolls 14,22 11,95 0,14 0,12 Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 118g/m², laminate thickness: 0,16mm, laminate weight: 262g/m² Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 184g/m², laminate thickness: 0,25mm, laminate weight: 408g/m² Article: HP-T280/050E 280 g/m² : 5 cm Length: 100 lfm Twill /roll 7,0 y./cm from 1 roll 22,17 18,63 7,0 y./cm 0,22 0,19 from 5 rolls 20,49 17,22 0,21 0,18 from 10 rolls 16,39 13,77 0,16 0,13 Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 232g/m², laminate thickness: 0,31mm, laminate weight: 514g/m² Tools / Accessories 50 phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 51

27 Reinforcement Fabrics Sandwich Material Mould and Casting Epoxy Resins Vacuum Technology Bidiagonal Glass Fabric Tape This Fabric-Tape is especially smooth and it can be easily applied around corners, curves and edges. It is suitable for applications in boat and tank construction, model making, sports equipment, pond and swimming pool constructions. : The fibres lie crossed on top of each other in +45 C and -45 C. They are fixed by a sewing thread. Article: HP-B320/100E : 10 cm /roll 20 m 9,90 8,32 0,50 0,42 50 m 100 m Article: HP-B320/150E : 15 cm /roll 20 m 11,90 10,00 0,60 0,50 50 m 100 m Article: HP-B420E /roll 20 m 9,75 8,19 0,49 0,41 50 m 100 m 17,50 14,71 0,35 0,29 27,90 23,45 0,28 0,23 21,90 18,40 0,44 0,37 36,85 30,97 0,37 0, Article: HP-B320/200E : 20 cm /roll 20 m 13,90 11,68 0,70 0,58 50 m 100 m Sports equipment,tanks,pipes, hulls, model making, boat building, reinforcements & repairs. Length Length 420 g/m² 9,5 cm 20 / 50 / 100 m Bidiagonal +45 / /-45 each 210 g/m² 300tex Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 345g/m², laminate thickness: 0,46mm, laminate weight: 765g/m² Sizing 320 g/m² 10 / 15 / 20 / 30 cm 20 / 50 / 100 m Bidiagonal +45 / /-45 each 160 g/m² 200tex E-Glass with Silane epoxy- & polyester resin Article: HP-B320/300E : 30 cm /roll 20 m 17,80 14,96 0,89 0,75 50 m 100 m Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 263g/m², laminate thickness: 0,35mm, laminate weight: 583g/m² 17,45 14,66 0,35 0,29 29,90 25,13 0,30 0,25 25,90 21,76 0,52 0,44 44,90 37,73 0,45 0,38 Silane 34,90 29,33 0,70 0,59 62,90 52,86 0,63 0,53 epoxy- & polyester resin D T ein eich.de Pond Pool Roof High quality coatings with glass fabric and! Whether pond, pool or roof coatings, glass fiber reinforced plastics (GfK) are a high-quality alternative to conventional materials! Advantages: Glass Fabric & Epoxyresin Easy do it yourself system solution Wrinkle-free design in many colors More durable than conventional materials Can be expanded and redesigned at any time Pond Koi Basin Roof Coating Pool Inform & order now: Our team will be happy to assist you with any questions about your project! info@deinteich.de +49 (0) A division of HP-Textiles GmbH Colours / Coatings Mould Release Agent Tools / Accessories Fillers / Additives Cleanser / Thinner 52 phone: +49 (0) mail: info@hp-textiles.com

28 Sandwich Material Reinforcement Fabrics Glass Braided Sleeve Glass fibre braided sleeves are ideal for the production of tubes and also for prostheses in orthopedic technology. Another major area of application is spar- or hollow structures in vehicles, sports equipment and boat building. The glass fibre sleeves are well suitable for applications with epoxy or polyester resins. The diameter of the braided sleeves can be varied by stretching. Ideally, the fiber angle should be between 30 and 60. Optimal torsion and shear strengths are achieved at an angle of 45. You can find more detailed information on our product data sheet. Our glass fibre braided sleeves are always offered and sold in stretched condition, since it is technically not possible to wrap the hoses with a fiber angle of 45. As a guideline, a length change of approx % is possible. Example: straight carbon sleeve approx. 100m. / at 45 length of approx. 75m Article material E-Glass number of ENDS diameter at 45 mm area of application ø mm HP-BSE017/060 34x2tex HP-BSE020/ tex Glass Flat Braid E-Glass braided tapes are an excellent alternative to conventional glass fiber tapes. Due to the special braiding technique, the application width is variable. By stretching or gathering together the width can be changed. Ideally, the fiber angle should be between 30 and 60. Optimal torsion and shear strengths without complex cutting are therefore possible. The e-glass fiber braided tapes are well suitable for applications with epoxy or polyester resins. You can find more detailed information on our product data sheet. Our e-glass braided tapes are always offered and sold in stretched condition, since it is technically not possible to wrap the tapes with a fiber angle of 45. As a guideline, a length change of approx % is possible. Example: straight carbon sleeve approx. 100m. at 45 length of approx. 75m Please note that the length changes depending on the fibre angle. Article material E-Glass number of ENDS width at 45 mm area of application mm HP-BFE036/65 136tex HP-BFE065/ tex Mould Release Agent Colours / Coatings Mould and Casting Epoxy Resins Vacuum Technology HP-BSE043/ tex HP-BSE055/ tex HP-BSE100/ tex Article: HP-BSE017/060 /roll 5 m 10 m 25 m 50 m 100 m Article: HP-BSE043/192 Article: HP-BSE055/288 /roll 5 m 10 m 8,06 6,75 1,61 1,35 9,40 7,90 0,94 0,79 14,98 12,50 0,60 0,50 21,96 18,50 0,44 0,37 38,53 32,00 0,39 0,32 11,76 9,90 2,35 1,98 16,45 13,80 1,64 1,38 /roll 5 m 10 m 13,57 11,40 2,71 2,28 19,90 16,70 1,99 1,67 Article: HP-BSE020/144 /roll 5 m 10 m 25 m 50 m 100 m Article: HP-BSE100/720 /roll 5 m 10 m 9,77 8,20 1,95 1,64 12,66 10,60 1,27 1,06 22,72 19,00 0,91 0,76 36,63 31,00 0,73 0,62 66,98 56,00 0,67 0,56 28,38 23,85 5,68 4,77 47,57 40,00 4,76 4,00 Article: HP-BFE036/65 /roll 5 m 10 m 25 m 50 m 100 m 9,31 7,80 1,86 1,56 11,78 9,90 1,18 0,99 20,63 17,25 0,83 0,69 32,67 27,50 0,65 0,55 59,35 50,00 0,59 0,50 Article: HP-BFE065/130 /roll 5 m 10 m 25 m 50 m 100 m 11,10 9,30 2,22 1,86 15,18 12,80 1,52 1,28 28,71 24,13 1,15 0,97 47,58 39,98 0,95 0,80 89,13 75,00 0,89 0,75 Tools / Accessories Fillers / Additives Cleanser / Thinner 25 m 50 m 100 m 31,71 26,75 1,27 1,07 53,36 45,00 1,07 0,90 99,60 84,00 1,00 0,84 25 m 50 m 100 m 39,91 33,50 1,60 1,34 69,19 58,00 1,38 1,16 129,99 109,00 1,30 1,09 25 m 50 m 100 m 106,89 89,75 4,28 3,59 193,92 163,00 3,88 3,26 377,14 317,00 3,77 3,17 Braided Sleeve 54 phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 55

29 Vacuum Technology Sandwich Material Reinforcement Fabrics Overview Glass Roving Fabric The Glass-Roving-Fabric consists of one or a certain number of glass strands aligned almost parallel, twist free and bundled to form. The diameter of a single filament is between 13mµ and 24mµ. You can make thick mouldings with less layers. The fibre content and the strength of these laminates is higher compared to the Glass--Mats but lower than the Glass-Filament-Fabrics or multiaxial fabrics. page Article weight g/m² weave style threads/cm / yarn type Tex yarn type Tex 57 HP-P300E 300 5,0 x 5, width mm HP-P401E HP-T580E HP-P600E HP-T600/150E HP-P800E Twill 2/2 Twill 2/2 3,3 x 2,3 2,5 x 2,2 2,5 x 2,4 7 x 7,2 1,7 x 1, Different weights, constructions and widths are available upon request! Glass Roving Fabrics Article: HP-P300E from 1m²* from 65m² from 130m² Article: HP-P401E from 1m²* from 65m² from 130m² 2,57 2,16 2,25 1,89 1,80 1,51 1,61 1,35 1,29 1,08 1,15 0,97 Boat constructions, tank and mould construction, vehicle parts. Boat constructions, tank and mould construction, vehicle parts. * Up to 2,5m² the article will be delivered folded. From 3m² on a roll. Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 247g/m², laminate thickness: 0,33mm, laminate weight: 547g/m² 3,14 2,64 2,75 2,31 2,20 1,85 1,96 1,65 1,57 1,32 1,42 1, g/m² 130 cm 3,3 y./cm 2,3 y./cm Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 330g/m², laminate thickness: 0,44mm, laminate weight: 730g/m² Sizing Sizing 300 g/m² 130 cm 5 y./cm 5 y./cm Silane epoxy- & polyester resin Silane epoxy- & polyester resin Cleanser / Thinner Mould Release Agent Colours / Coatings Epoxy Resins Article: HP-T580E from 1m²* 4,36 3,66 4,21 3,54 4,07 3, g/m² 130 cm Twill 2,5 y./cm Fillers / Additives Mould and Casting 3,92 3,29 2,2 y./cm 1 Roll / 2,90 2,44 Boat constructions, tank and Sizing Silane 42,9m² mould construction, vehicle parts. 2 Rolls / 2,62 2,20 epoxy- & polyester resin 85,8m² Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 476g/m², laminate thickness: 0,49mm, laminate weight: 820g/m² Article: HP-P600E from 1m²* 3,68 3, g/m² 130 cm Tools / Accessories 1 Roll / 41,5m² 2 Rolls / 83m² 3,55 2,98 3,44 2,89 3,31 2,78 2,82 2,37 2,45 2,06 Boat constructions, tank and mould construction, vehicle parts. Sizing 2,5 y./cm 2,4 y./cm Silane epoxy- & polyester resin Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 493g/m², laminate thickness: 0,66mm, laminate weight: 1093g/m² 56 phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 57

30 Vacuum Technology Sandwich Material Reinforcement Fabrics Glass Roving Fabrics Article: HP-T600/150E from 3m² Boat constructions, tank and mould construction, vehicle parts. * Up to 2,5m² the article will be delivered folded. From 3m² on a roll. 600 g/m² 150 cm Twill 2/2 7 y./cm 7,2 y./cm Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 493g/m², laminate thickness: 0,66mm, laminate weight: 1093g/m² Article: HP-P800E from 1m²* from 65m² from 130m² 6,38 5,36 5,46 4,59 4,91 4,13 4,37 3,67 3,97 3,34 4,33 3,64 3,71 3,12 3,34 2,81 2,98 2,50 2,48 2,08 2,23 1,87 Boat constructions, tank and mould construction, vehicle parts. Sizing Silane epoxy- & polyester resin 800 g/m² 130 cm 1,7 y./cm 1,6 y./cm Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 658g/m², laminate thickness: 0,88mm, laminate weight: 1458g/m² Sizing Silane epoxy- & polyester resin Overview Chopped Glass Mat The mat consists of chopped and un-oriented E-Glass spinning threads which are coated with a silane sizing. The connection of the spinning threads among each other takes place by a powdery, in styrene readily soluble and polyester based mat-binder. The processing takes place by the usual contact process. The mat is suitable for epoxy, polyester and vinylester resins. ECR-Glass fibre mat (HP-MP450C) combine the electrical and mechanical properties of E-glass fibre with superior chemical corrosion resistance, superior thermal resistance, higher dielectric strength and better surface resistivity. ECR-Glass (E-Glass Corrosion Resitant) has an extremely high corrosion resistance. ECR-Glass chopped strand mat is made from fibreglass strands of a certain length and they are bonded together with a powder binder. page Article weight g/m² Roll kg / roll Inner Tube ø mm width cm Packing Quantity roll / palett 60 HP-MPS150E /30/ Foil HP-MP225E /35/ Foil HP-MP300E /35/ Foil HP-MP450E /35/ Foil HP-MP600E /35/ Foil HP-MP450C / Foil 20 Different weights, constructions and widths are available upon request! Cleanser / Thinner Mould Release Agent Colours / Coatings Mould and Casting Tools / Accessories Epoxy Resins Fillers / Additives 58 phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 59

31 Vacuum Technology Sandwich Material Reinforcement Fabrics Chopped Strand Mats -Powder Bounded- Artikel: HP-MPS150E from 1m²* 1,67 1,40 1,37 1,15 1 Roll / 25kg /kg 1,18 1,00 0,82 4,45 0,99 0,84 0,69 3,74 Boat construction, tank and mould construction, vehicle parts, garden ponds and swimming pools. * Up to 2,5m² the article will be delivered folded. From 3m² on a roll. Yarn type Strand linier density: 150 g/m² 125 cm Chopped Strand Mat E-Glass 15 tex Calculated data for hand laminate with 15 vol. % fibres: resin consumption: 376g/m², laminate thickness: 0,38mm, laminate weight: 526g/m² Artikel: HP-MP225E from 1m²* 1 Roll / 25kg /kg 1,83 1,54 1,51 1,27 1,25 1,05 1,05 0,88 0,94 0,79 3,25 2,73 Boat construction, tank and mould construction, vehicle parts, garden ponds and swimming pools. Sizing Yarn type Strand linier density: Silane EP-, UP- & VE-Resin 225 g/m² 125 cm Chopped Strand Mat E-Glass 33 tex Calculated data for hand laminate with 15 vol. % fibres: resin consumption: 560g/m², laminate thickness: 0,58mm, laminate weight: 789g/m² Sizing Silane EP-, UP- & VE-Resin Chopped Strand Mats -Powder Bounded- Artikel: HP-MP600E from 1m²* 1 Roll / 25kg /kg 4,50 3,78 3,72 3,13 3,08 2,59 2,57 2,16 3,00 2,52 Boat construction, tank and mould construction, vehicle parts, garden ponds and swimming pools. * Up to 2,5m² the article will be delivered folded. From 3m² on a roll. Yarn type Strand linier density 600 g/m² 125 cm Chopped Strand Mat E-Glass 33 tex Calculated data for hand laminate with 15 vol. % fibres: resin consumption: 1500g/m², laminate thickness: 1,54mm, laminate weight: 2100g/m² Sizing Silane EP-, UP- & VE-Resin Cleanser / Thinner Mould Release Agent Colours / Coatings Mould and Casting Epoxy Resins Artikel: HP-MP300E from 1m²* 1 Roll / 25kg /kg 2,31 1,94 1,92 1,61 1,58 1,33 1,32 1,11 1,18 0,99 3,00 2,52 Boat construction, tank and mould construction, vehicle parts, garden ponds and swimming pools. Yarn type Strand linier density: 300 g/m² 125 cm Chopped Strand Mat E-Glass 33 tex Calculated data for hand laminate with 15 vol. % fibres: resin consumption: 750g/m², laminate thickness: 0,77mm, laminate weight: 1050g/m² Artikel: HP-MP450E from 1m²* 3,38 2,84 2,80 2,35 1 Roll / 25kg /kg 2,31 1,93 3,00 1,94 1,62 2,52 Boat construction, tank and mould construction, vehicle parts, garden ponds and swimming pools. Sizing Yarn type Strand linier density: Silane EP-, UP- & VE-Resin 450 g/m² 125 cm Chopped Strand Mat E-Glass 33 tex Calculated data for hand laminate with 15 vol. % fibres: resin consumption: 1127g/m², laminate thickness: 1,15mm, laminate weight: 1577g/m² Sizing Silane EP-, UP- & VE-Resin ECR Glass Mat * Up to 2,5m² the article will be delivered folded.. From 3m² on a roll. ECR-Glass reinforcements combine the eletrical and mechanical properties of E-Glass s with superior chemical corrosion resistance, superior thermal resistance, higher dielectric strenght and better surface resistivity. ECR-Glass (E-Glass Corrosion Resistant) has an extremely high corrosion resistance. ECR-Glass chopped strand mat is made from fibreglass strands of a certain length and they are bonded together with a powder binder. Article: HP-MP450C 450 g/m² from 1m²* 4,58 3, / 127 cm 3,67 3,08 ECR Glass Mat 3,20 2,69 Yarn type ECR-Glass from 20m² 2,75 2,31 Strand linier density: 30 tex 1 Roll / 25kg 3,99 3,35 sewer renovation, automotiv parts, Sizing Silane /kg boat construction, swimming pools. high weathering & chemical resistance EP-, UP- & VE-Resin Calculated data for hand laminate with 15 vol. % fibres: resin consumption: 1127g/m², laminate thickness: 1,15mm, laminate weight: 1577g/m² Tools / Accessories Fillers / Additives 60 phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 61

32 Reinforcement Fabrics Sandwich Material Vacuum Technology Combo Mat The Combo-Mat is made of a Glass-Roving-Fabric and a Glass--Mat that are stitched together. The Glass--Mat is made of chopped glass. The combination of the Roving-Fabric and the -Mat combines the advantages of the individual components and saves one working process. The Combo-Mat is basically used in pultrusion, RTM, filament winding and hand lay-up processes. Typical products include pultruded parts, pipe, storage tanks, wind generator blades and other FRP products. Article: HP-PC1050AD Woven Roving + Chopped Glass from 1m² 10,59 8,90 9,22 7,75 7,72 6,49 6,65 5,59 5,53 4,65 4,99 4,19 Advantex-Glass - Combo Mat Sewer pipes, boat building, car parts, tank and mould construction. high weathering & chemical resistance 1050 g/m² 125 cm Roving fabric 600 g/m² Glass Mat 450 g/m² Sizing needled Silane epoxy- & polyester resin Calculated data for hand laminate with 25 vol. % fibres: resin consumption: 1400g/m², laminate thickness: 1,62mm, laminate weight: 2450g/m² C-Glass Non Woven The non-woven C-Glass-Fabric has a styren soluble binder. It owns an optimised chemical resistance and has a thread equipment on a silane basis. The binder disperses quickly in the resin, therefore it is possible to handle complex geometries and curves. The C-Glass fabrics can be applied in different processes (e.g. by using low pressure) in order to achieve visually and chemically improved surfaces. Article: HP-VJ30C from 1m² 2,14 1,80 1,71 1,44 1,29 1,08 1,15 0,97 1,12 0,94 1,07 0,90 Tubes and tank for chemicals, industrial pressing parts, pond and pool coatings. * Up to 2,5m² the article will be delivered folded. From 3m² on a roll. Yarn type 30 g/m² 100 / 127 cm Glass non woven C-Glass epoxy- & polyester resin Colours / Coatings Mould Release Agent Cleanser / Thinner Epoxy Resins Mould and Casting Article: HP-PC1050E Woven Roving + Chopped Glass from 1m² from 65m² from 130m² 8,09 6,80 6,94 5,83 6,24 5,24 5,55 4,66 4,63 3,89 4,17 3,50 Boat construction, tank and mould construction, vehicle parts, flag poles. Calculated data for hand laminate with 25 vol. % fibres: resin consumption: 1400g/m², laminate thickness: 1,62mm, laminate weight: 2450g/m² Article: HP-BC1050E Multiaxial Fabric + Chopped Glass from 1m² 8,13 6,83 6,96 5,85 1 Roll / 31,75m² 2 Rolls / 63,5m² 5,81 5,11 4,18 4,88 4,29 3,51 Boat construction, tank and mould construction, vehicle parts, flag poles g/m² 130 cm Roving fabric 600 g/m² Glass Mat 450 g/m² Sizing needled Silane epoxy- & polyester resin 1050g/m² 127cm Roving fabric 600 g/m² 0 /90 Glass Mat 450 g/m² Sizing needled Silane epoxy- & polyester resin Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 863g/m², laminate thickness: 1,15mm, laminate weight: 1913g/m² Article: HP-VJ50C from 1m² 2,14 1,80 1,71 1,44 1,29 1,15 1,12 1,07 1,08 0,97 0,94 0,90 Tubes and tank for chemicals, industrial pressing parts, pond and pool coatings, model making. 50 g/m² 100 cm Glass non woven Yarn type C-Glass epoxy- & polyester resin Fillers / Additives Tools / Accessories 62 phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 63

33 Vacuum Technology Sandwich Material Reinforcement Fabrics Printed Glass Non Woven Our newly developed printed Non-Woven-Glass is made of very fine and evenly distributed glass fibres. A high-quality print with very resistant colours is possible because of the smooth surface. The Non-Woven-Glass is very smooth and good to handle because of the low binder content. We recommend for processing with the Non-Woven-Glass our non-sticky hardening Epoxy and. The final look of the component is shown after hardening. Sports equipment Furniture industry Ski and snowboards Kick- and skateboards Exhibition stands and shopfitting Boat construction Sanitary installations Article: HP-V30CF from 1m² 8,21 6,90 7,08 5,95 5,83 4,70 4,28 3,81 4,90 3,95 3,60 3,20 Quality Features: High quality print Constant fibre distribution, smooth surfaces Consistent colours The visual appearance on the cured laminate is very nice Low binder content Soft and smooth, good deformability Look 30 g/m² 100 cm Glass non woven Camouflage EP-, UP and VE Resin The resin consumption depends on the underground. Only for the Non-Woven Glass it s about 250g/m². Mould Making Fabric - Non Woven- This Mould-Making-Fabric is especially well drapable and tensible. It is therefore suitable for complex components and forms. It is made of 100% polyester fibres and is suitable for epoxy and polyester resins. The resin consumption is at approx. 1,5-2 kg/m² depending on the use. It can be used effectively in single or multiple layers. Article: HP-VP151P from 1m²* 3,75 3,15 2,68 2,25 2,14 1,61 1,34 1,13 1,80 1,35 1,13 0,95 Car boot expansion, car-hi-fi extensions and door boards, roof liners. Ideal for complex curvatures Mould making fabric -Combo mat- * Up to 2,5m² the article will be delivered folded. From 3m² on a roll. Material Weave Thickness 150 g/m² 130 cm max. temp. 185 C Non Woven 100% Polyester needled 3-4 mm (unpressed) epoxy- & polyester resin Cleanser / Thinner Mould Release Agent Colours / Coatings Mould and Casting Epoxy Resins Article: HP-V30SW from 1m² 8,21 6,90 7,08 5,95 5,83 4,70 4,28 3,81 4,90 3,95 3,60 3,20 Article: HP-V30WG from 1m² 8,21 6,90 Look 30 g/m² 100 cm Glass non woven Stone Effect EP-, UP and VE Resin The resin consumption depends on the underground. Only for the Non-Woven Glass it s about 250g/m². 30 g/m² 100 cm Due to the special needling of roving and chopped glass fibres this combination is especially voluminous, cuddly and therefore suitable for applications in moulds. Already with one layer you achieve a laminate thickness of approx. 4 5 mm. The resin consumption is at approx. 2 kg/m² depending on surface and application. Article: HP-PC600E Woven Roving + Chopped Glass from 1m² 7,50 6,30 6,19 5,20 5,59 4,75 4,27 3,80 4,70 3,99 3,59 3,19 Tank and mould construction, boot expansion, car-hi-fi extensions and door boards. 600 g/m² 120 cm Roving fabric 300 g/m² Choppes glass 300 g/m² needled epoxy- & polyester resin Tools / Accessories Fillers / Additives 7,08 5,95 5,83 4,90 4,70 3,95 4,28 3,60 3,81 3,20 Look Glass non woven Wood Effect EP-, UP and VE Resin The resin consumption depends on the underground. Only for the Non-Woven Glass it s about 250g/m². Ideal for complex curvatures 64 phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 65

34 Epoxy Resins Vacuum Technology Sandwich Material Reinforcement Fabrics Glass Staple Fabric Our Glass Staple Fabrics do have excellent thermal insulation properties. They are very soft and absorbent and therefore, they are particularly suited as supporting fabrics for sealings and compensators. Due to the good draping performance, the thickness and the homogenious resin absorption, Glass Staple Fabrics are perfectly adapted to applications like modeling and molding. The C-Glass owns an optimised chemical resistance. Article: HP-PT160E from 1m²* Article: HP-PT400E from 1m²* 8,29 6,97 6,96 5,85 6,19 5,20 5,59 4,70 4,74 3,98 4,15 3,49 13,80 11,60 11,72 9,85 9,98 8,39 9,16 7,70 7,62 6,40 6,89 5,79 Modell and mould construction, thermal insulation and filtration technology. Modell and mould construction, thermal insulation and filtration technology. * Up to 2,5m² the article will be delivered folded. From 3m² on a roll. Yarn type Yarn type 160 g/m² 100 cm 3,9 y./cm 4,0 y./cm C-Glass / 200 tex Z110 epoxy- & polyester resin 400 g/m² 100 cm 2,8 y./cm 2,9 y./cm C-Glass / 660 tex Z110 epoxy- & polyester resin Overview Multiaxial Glass Fabrics Non-woven Multiaxial Glass Fabrics are textile structures. Their fibres are endless and located parallel to each other. They are fixed together with a sewing thread or with a thermosetting. Many areas increase their competitiveness by using the advantages of multiaxial fabrics, whether in aerospace, boat building or motor sports. Quality features epoxy, polyester and vinylester resin Better mechanical properties Good wet out and lower resin consumption Load oriented fibre orientation page Article Weave Style Unidirectional Orientation Areal weight g/m² Applications + 45 Boat construction Sports equiment Motor sports - 45 Motor blades Mould and tank construction cm Roll length m Roll weight kg 68 HP-U400E HP-U600E HP-U960E HP-U1210E HP-B421E HP-B320E HP-B450E HP-B600E HP-B810E HP-B980E HP-B1210E HP-B421E HP-B630E HP-B840E HP-T610E Unidirectional Unidirectional Unidirectional Bidirectional Bidiagonal Bidiagonal Bidiagonal Bidiagonal Bidiagonal Bidiagonal Bidirectional Bidirectional Bidirectional Triaxial /90 +45/ / / / / /-45 0 /90 0 /90 0 /90 0 /-45/ /127 63/ /100 50/ / /41 29/ ,5 / Fillers / Additives Cleanser / Thinner Mould Release Agent Colours / Coatings Mould and Casting HP-T750E HP-T1150E HP-Q630E HP-Q850E HP-Q1200E Triaxial Triaxial Quadraxial Quadraxial Quadraxial 0 /-45/+45 0 /-45/+45 0 /-45/90 /+45 0 /-45/90 /+45 0 /-45/90 / / 30 / / / ,4 / These articles, as well as different weights, constructions and widths are available upon request! Tools / Accessories 66 phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 67

35 Mould and Casting Epoxy Resins Vacuum Technology Sandwich Material Reinforcement Fabrics Multiaxial Glass Fabrics -Unidirectional- Article: HP-U400E from 1m² 3,83 3,22 3,36 2,82 2,59 2,18 2,11 1, g/m² 1 Roll / 1,73 1,45 Boat construction, tank and mould 63,5m² construction, vehicle parts, model making, ski and snowboards, rotor blades, sports equipment. Sizing Silane epoxy- & polyester resin Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 328g/m², laminate thickness: 0,44mm, laminate weight: 728g/m² Article: HP-U600E 650 g/m² 127 cm from 1m² 4,85 4,08 4,17 3,50 Unidirectional 0 3,51 2, g/m² 3,05 2, g/m² 1 Roll / 2,50 2,10 Boat construction, tank and mould 50,8m² Sizing Silane construction, vehicle parts, model making, ski and snowboards, epoxy- & polyester resin rotor blades, sports equipment. Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 492g/m², laminate thickness: 0,66mm, laminate weight: 1092g/m² Article: HP-U1210E 440 g/m² 127 cm Unidirectional g/m² Multiaxial Glass Fabrics -Bidirectional- Article: HP-B421E Article: HP-B320E Boat construction, tank and mould construction, model making, sports equipment Calculated data for hand laminate with 40 vol. % fibres: resin consumption: 279g/m², laminate thickness: 0,40mm, laminate weight: 700g/m² Multiaxial Glass Fabrics -Bidiagonal- Boat construction, tank and mould construction, vehicle parts, model making, sports equipment, garden ponds and swimming pools. epoxy- & polyester resin 1210 g/m² 127 cm Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 263g/m², laminate thickness: 0,35mm, laminate weight: 583g/m² from 1m² 8,79 7,39 7,56 6,35 Unidirectional 0 6,28 5, g/m² Article: HP-B320/635E 5,53 4, g/m² 320 g/m² 1 Roll / 4,11 3,45 Boat construction, tank and mould Sizing Silane 63 cm 50kg /kg /kg construction, vehicle parts, model making, ski and snowboards, from 1m² 3,77 3,17 epoxy- & polyester resin 3,36 2,82 Bidiagonal +45 /-45 rotor blades, sports equipment. 2,93 2, g/m² Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 994g/m², laminate thickness: 1,33mm, laminate weight: 2204g/m² 2,51 2, g/m² 1 Roll / 2,09 1,76 Boat construction, tank and mould 63m² Sizing Silane construction, vehicle parts, model making, sports equipment, garden ponds and swimming epoxy- & polyester resin pools. from 1m² 1 Roll / 63,5m² from 1m² 1 Roll / 63,5m² 3,83 3,22 3,36 2,82 2,59 2,18 2,11 1,77 1,73 1,45 3,77 3,17 3,36 2,82 2,93 2,46 2,51 2,11 2,09 1, g/m² 127 cm Bidiagonal +45 / g/m² g/m² Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 263g/m², laminate thickness: 0,35mm, laminate weight: 583g/m² Sizing 421 g/m² 127 cm Bidirectional 0 / g/m² g/m² Sizing Very well suitably for complicated geometry Silane epoxy- & polyester resin Silane Colours / Coatings Mould Release Agent Cleanser / Thinner Fillers / Additives Tools / Accessories Note: The article HP-B320E is now also available as tape in the widths 10cm, 15cm, 20cm and 30cm (see page 52)! 68 phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 69

36 Vacuum Technology Sandwich Material Reinforcement Fabrics Multiaxial Glass Fabrics - Bidiagonal- Article: HP-B450E 450 g/m² from 1m² 4,69 3, cm 4,11 3,45 Bidiagonal +45 /-45 3,52 2, g/m² 2,93 2, g/m² 1 Roll / 2,58 2,17 Boat construction, tank and mould 63,5m² Sizing Silane construction, vehicle parts, model making, sports equipment, garden ponds and swimming pools. epoxy- & polyester resin Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 370g/m², laminate thickness: 0,49mm, laminate weight: 820g/m² Article: HP-B450/635E 450 g/m² 63 cm from 1m² 4,69 3,94 4,11 3,45 Bidiagonal +45 /-45 3,52 2, g/m² 1 Roll / g/m² 2,93 2,46 31,5m² Boat construction, tank and mould 2 Rolls / Sizing Silane 2,58 2,17 construction, vehicle parts, model 63m² making, sports equipment, garden ponds and swimming pools. epoxy- & polyester resin Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 370g/m², laminate thickness: 0,49mm, laminate weight: 820g/m² Multiaxial Glass Fabrics -Triaxial / Quadraxial- Article: HP-T750E from 1m² 6,90 5,80 5,91 4,97 1 Roll / 31,75m² 2 Rolls / 63,5m² 4,93 4,34 3,55 4,14 3,65 2,98 Boat constructions, tank and mould construction, vehicle parts, model making, snowboards, kickboards. Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 616g/m², laminate thickness: 0,82mm, laminate weight: 1365g/m² Article: HP-T1150E 750 g/m² 127 cm Triaxial 0 /-45 / g/m² +45 /-45 each 235 g/m² 1150 g/m² from 1m² 10,59 8, cm 9,07 7,62 Triaxial 0 /-45 /+45 7,56 6, g/m² 1 Roll / +45 /-45 each 300 g/m² 6,65 5,59 31,75m² Boat construction, tank and 2 Rolls / Sizing Silane 5,44 4,57 mould construction, vehicle parts, model making, ro- 63,5m² epoxy- & polyester resin tor blades, sports equipment. Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 945g/m², laminate thickness: 1,26mm, laminate weight: 2095g/m² Sizing Silane epoxy- & polyester resin Cleanser / Thinner Mould Release Agent Colours / Coatings Mould and Casting Epoxy Resins Article: HP-B600E from 1m² 1 Roll / 50,8m² Article: HP-B810E from 1m² 1 Roll / 31,75m² 5,47 4,60 4,69 3,94 4,22 3,55 3,75 3,15 3,13 2,63 Boat construction, tank and mould construction, vehicle parts, model making, rotor blades. Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 493g/m², laminate thickness: 0,66mm, laminate weight: 1093g/m² 7,39 6,21 6,33 5,32 5,27 4,43 4,64 3,90 3,80 3,19 Boat construction, tank and mould construction, vehicle parts, model making, rotor blades. 810 g/m² 127 cm Bidiagonal +45 / g/m² g/m² Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 665g/m², laminate thickness: 0,89mm, laminate weight: 1475g/m² Sizing 600 g/m² 127 cm Bidiagonal +45 / g/m² g/m² Sizing Silane epoxy- & polyester resin Silane epoxy- & polyester resin Article: HP-Q800E 800 g/m² 127 cm from 1m² 7,46 6,27 6,39 5,37 Quadraxial 0 /90 /+45 /-45 5,33 4,48 0 /90 /+45 /-45 each 200g/m² 4,69 3,94 Sizing Silane 1 Roll / 60kg / 3,83 3,22 Boat construction, tank and approx. 74m² mould construction, vehicle parts, model making, ro- epoxy- & polyester resin tor blades, sports equipment. Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 657g/m², laminate thickness: 0,88mm, laminate weight: 1457g/m² Article: HP-Q850E 860 g/m² 127 cm from 1m² 7,82 6,57 6,71 5,64 Quadraxial 0 /-45 /90 /+45 5,59 4, g/m² 1 Roll / +45 /90 /-45 each 200g/m² 4,91 4,13 38,1m² Boat construction, tank and 2 Rolls / Sizing Silane 4,02 3,38 mould construction, vehicle parts, model making, ro- 76,2m² epoxy- & polyester resin tor blades, sports equipment. Calculated data for hand laminate with 35 vol. % fibres: resin consumption: 698g/m², laminate thickness: 0,93mm, laminate weight: 1550g/m² Tools / Accessories Fillers / Additives 70 phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 71

37 Vacuum Technology Sandwich Material Reinforcement Fabrics 3D CORE TM 3D CORE is a structure reinforcing foam core, which consists of hexagonal honeycombs, connected together by fine ribs. Through the honeycomb structure, the plate receives a great flexibility, which allows an excellent drapability of the foam core, and thus follows a contour. Due to the simplicity of processing 3D CORE improves production processes and therefore also suitable for the IMC/MTI -process. So it not only saves time but also material. 3D-CORE is the ideal closed cell foam core for your application: 3-dimensional drapeability Highly improved technical properties for flexural, compression and shear strength Sustainable production better bending stiffness reduced input of carbon excellent processing highly economic clearly better fiber impregnation no fiber washing Resin Consumption: Surface approx.. 400g/m²/Seite Structure 90g x mm x m² Integrated flow aid drapability increase productivity Light and stable inexpensive Best technical characteristics Article Sheet Size thickness Material Sheets / Box m² / Box mm mm PET 100kg/m³ HP-3DCORE x 405 x ,34 Vacuum Infusion with 3D Core Article: HP-3DCORE-3 Article: HP-3DCORE-5 Thickness: 3 mm PET 100kg/m³ Thickness: 5 mm PET 100kg/m³ /sheet from 1 pcs. 7,37 6,19 from 1 pcs. 7,81 6,57 from 5 pcs. 6,59 5,54 from 5 pcs. 6,98 5,87 from 10 pcs. 5,96 5,01 from 10 pcs. 6,32 5,31 from 25 pcs. 5,49 4,61 from 25 pcs. 5,82 4,89 from 50 pcs. 5,21 4,38 from 50 pcs. 5,52 4,64 from 100 pcs. 4,86 4,09 from 103 pcs. 5,15 4,33 Reductions Other Strengths New Dimensions Article: HP-3DCORE-7 Thickness: 7 mm PET 100kg/m³ from 1 pcs. 9,48 7,97 from 5 pcs. 8,48 7,12 from 10 pcs. 7,67 6,44 from 25 pcs. 7,06 5,94 from 50 pcs. 6,70 5,63 from 73 pcs. 6,26 5,26 Cleanser / Thinner Mould Release Agent Colours / Coatings Mould and Casting Epoxy Resins HP-3DCORE x 405 x ,65 HP-3DCORE x 405 x ,76 HP-3DCORE x 405 x ,62 HP-3DCORE x 405 x ,30 HP-3DCORE x 405 x ,32 HP-3DCORE x 405 x ,17 HP-3DCORE-12, x 405 x 12,5 12, ,61 HP-3DCORE x 405 x ,11 HP-3DCORE x 405 x ,45 HP-3DCORE x 405 x ,38 HP-3DCORE x 405 x ,30 + = in stock - = on demand 3D CORE is available on request in different foam types, densities and structures. Foam types / densities: PET 100, 150, 200kg/m³ Structures: Hexagon (PET und XPS), Rhombus (XPS), DELTA (XPS) Article: HP-3DCORE-10 Article: HP-3DCORE-12,5 Article: HP-3DCORE-15 Thickness: 10 mm PET 100kg/m³ Thickness: 12,5 mm PET 100kg/ Thickness: 15 mm PET 100kg/m³ from 1 pcs. 11,73 9,85 from 1 pcs. 13,18 11,08 from 1 pcs. 15,53 13,05 from 5 pcs. 10,42 8,76 from 5 pcs. 11,72 9,85 from 5 pcs. 13,80 11,60 from 10 pcs. 9,38 7,88 from 10 pcs. 10,55 8,86 from 10 pcs. 12,42 10,44 from 25 pcs. 8,86 7,45 from 25 pcs. 9,96 8,37 from 34 pcs. 11,73 9,86 from 51 pcs. 8,34 7,01 from 40 pcs. 9,37 7,88 from 68 pcs. 11,04 9,28 from 102 pcs. 7,82 6,57 from 80 pcs. 8,79 7,39 Article: HP-3DCORE-20 Article: HP-3DCORE-25 Thickness: 20 mm PET 100kg/m³ Thickness: 25 mm PET 100kg/m³ Tools / Accessories Fillers / Additives from 1 pcs. from 5 pcs. from 10 pcs. from 25 pcs. from 50 pcs. 19,78 17,53 16,18 15,28 14,39 16,62 14,73 13,60 12,84 12,09 from 1 pcs. from 5 pcs. from 10 pcs. from 20 pcs. from 40 pcs. 23,13 20,56 18,50 17,48 16,45 19,44 17,28 15,55 14,69 13,82 72 phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 73

38 Sandwich Material Reinforcement Fabrics SORIC SF / LRC of Lantor SORIC SF Thin and good drapeable honeycomb corematerial. The general purpose for infusion core, especially for thinner laminates. closed mould processes, including infusion (IMC/MTI-Process), RTM-light and RTM-Heavy. Advantages: excellent drapeability The general purpose for infusion core, especially for thinner laminates. Compatible with all regular types of resins, including Polyester, Vinylester and Epoxy. Controlled and stable flow front SORIC LRC Very thin honeycomb corematerial. The general purpose for infusion core, especially for thinner laminates. closed mould processes, including infusion (IMC/MTI-Process), RTM-light and RTM-Heavy. Advantages: for very thin applications Compatible with all regular types of resins, including Polyester, Vinylester and Epoxy. Controlled and stable flow front Coremat of Lantor Core material and print through barrier for open mould processes Advantages: Honeycomb structure for excellent drapeability. Is used as core material and/or print blocker. Compatible with all regular types of resins, including Polyester, Vinylester and Epoxy. Is suitable for hand lay-up and spray-up processes. Article designation thickness mm cm g/m² resin uptake approx. kg/m² fibre type HP-CORE-XM-2 Coremat XM Polyester HP-CORE-XM-3 Coremat XM ,5 Polyester HP-CORE-XM-4 Coremat XM Polyester HP-CORE-XM-10 Coremat XM ,5 Polyester Mould Release Agent Colours / Coatings Mould and Casting Epoxy Resins Vacuum Technology Article designation thickness mm Article: HP-CORE-SF-2 Thickness: 2 mm from 1m² 14,15 11,89 from 3m² 12,97 10,90 11,84 9,95 10,47 8,80 9,46 7,95 7,38 6,20 from 101,6m² 7,08 5,95 Article: HP-CORE-LRC-1.5 Thickness: 1,5 mm from 1m² from 3m² from 88,9m² cm g/m² Article: HP-CORE-LRC-2 Thickness: 2 mm from 1m² from 3m² from 76,2m² resin uptake approx. kg/m² fibre type HP-CORE-SF-2 Soric SF Polyester HP-CORE-SF-3 Soric SF ,3 Polyester HP-CORE-LRC-1.5 Soric LRC 1, ,6 Polyester HP-CORE-LRC-2 Soric LRC ,8 Polyester HP-CORE-LRC-3 Soric LRC ,0 Polyester 14,15 11,89 12,97 10,90 11,84 9,95 10,47 8,80 9,46 7,95 7,44 6,25 7,20 6,05 15,41 12,95 14,15 11,89 12,97 10,90 11,54 9,70 10,34 8,69 8,09 6,80 7,74 6,50 Article: HP-CORE-SF-3 Thickness: 3 mm from 1m² from 3m² from 63,5m² Article: HP-CORE-LRC-3 Thickness: 3 mm from 1m² from 3m² from 50,8m² 19,28 16,20 17,79 14,95 15,95 13,40 14,58 12,25 13,03 10,95 10,65 8,95 21,99 18,48 20,17 16,95 18,33 15,40 16,54 13,90 14,64 12,30 12,85 10,80 Applications for SORIC SF / LRC and Coremat by Lantor: Marine: Hulls, decks and structures of boats and yachts Transportation: Parts and panels of cars, trailers and trucks Leisure: Kayaks, surfboards, pools and tubs Industrial: Wind Energy, cladding panels, containers and tanks Article: HP-CORE-XM-2 Thickness: 2 mm from 1m² from 3m² from 80m² Article: HP-CORE-XM-10 Thickness: 10 mm from 1m² from 3m² from 30m² 10,95 9,20 10,20 8,57 9,39 7,89 8,21 6,90 7,44 6,25 6,65 5,59 5,49 4,61 s and availability upon request Article: HP-CORE-XM-3 Thickness: 3 mm from 1m² from 3m² 14,15 11,89 12,97 10,90 11,84 9,95 10,47 8,80 9,46 7,95 7,38 6,20 Article: HP-CORE-XM-4 Thickness: 4 mm from 1m² from 3m² from 40m² 16,90 14,20 15,70 13,19 14,22 11,95 12,38 10,40 11,07 9,30 9,10 7,65 Tools / Accessories Fillers / Additives Cleanser / Thinner 74 phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 75

39 Vacuum Technology Sandwich Material Reinforcement Fabrics 16 Overview Vacuum Technology In a fibre-reinforced combination, the load admission is taken primarily of the fibres.to achieve high strength, composite components should have a very high fiber volume fraction.this is achieved with the vacuum infusion process. In the Vacuum-Infusion-Process, the materials are laid dry into the mould and the vacuum bagging film is applied before the resin is introduced. The vacuum bagging film is heremetically sealed with a sealing tape. Once a complete vacuum is achieved, a fluid resin is literally sucked into the laminate via a second tubing. The reinforcement fibres are thus vented through the infusion resin and impregnated and compressed at the same time. Advantages of the Vacuum-Infusion-Process: high fibre volumen fraction and therefore achieving optimal component properties minimizing of gas and air pockets because of the closed impregnation manufacturing of complex and three-dimensional components is possible integration of inserts and foam cores is possible high degree of automation is possible (e.g. rotor blades) Overview of the construction of the vacuum infusion: Check the vacuum pressure with the VAC Checker during the infusion Description Material / Notes item Vacuum test with the VAC checker before the infusion After successful test, optional connection of the valve Vers. 5.5 Instructions / Videos Vacuum Technology On our website in the Video & Download Portal you ll find various work instructions and tutorials around the theme of vacuum technology for free. Learn step by step the basics of the vacuum technology. Starting with Why vacuum?, to Vacuum compression, Vacuum infusion and to the IMC / MTI - process in the vacuum infusion. You ll reach our download portal comfortably over this QR-Code, or on our website under the category downloads. Das IMC / MTI - Verfahren = Vakuuminfusion der nächsten Generation - Das Handbuch zur Animation - In-Mould Coating + MTI -Leitung Kosteneinsparung bei hoher Prozesssicherheit PRAXISTIPPS Video & Download-Portal Cleanser / Thinner Mould Release Agent Colours / Coatings Epoxy Resins 1 - Mould 2 - Release agent aqueous, up to 150 C (briefly up to 200 C) HP-HGR5 Priming wax and PVA, up to 100 C HP-G and HP-PVA Carnauba wax, up to 80 C HP-CX7 3 - Reinforcement fibres various types 4 - Peel ply Polyamide, twill / plain, var. width HP-P83P or HP-T105P 5 - Perforated film HDPE, 30g/m² HP-RF25/150, HP-Rf30/130 We are also happy to advise you by telephone or by mail! Tel.: +49 (0) Mail: info@hp-textiles.com Fillers / Additives 6 - Flow aid PE 145g/m², width 100cm HP-IM145/100 o. HP-IM230/120 Mould and Casting 7 - Flow channel PE spiral hose / Blade-Runner HP-ST060, HP-ST080, HP-ST100 / hp-vz Vacuum ring line MTI -hose HP-MTI Vacuum sealing tape Butyl rubber, use up to 80 C, black HP-ST12X3/80 synth. rubber, use up to 210 C, yellow HP-ST10X3/ Vacuum bagging film PA/PE/PA, width 2,60m HP-VF60/260 PA/PE/PA, width until 8m, very clear HP-VF70 PA/PE/PA as hose, width 1,50m HP-VFT75/150 PA as hose, width 20, 30, 60, 90cm hp-vft50 Advantage of MTI-Membran Infusion Tools / Accessories 11 - Vacuum hoses PE (esp. inexpensive), 10 or 12mm HP-VZ1010 or HP-VZ1020 PUR (esp. flexible), 10 or 12mm HP-VZ1030 or HP-VZ Plug connectors various types, manometer, valves, etc 13 - Squeezee /Squeezer hose clamp HP-VZ1400 or HP-VZ MTI Valve Automatic valve for vacuum infusion HP-VZ VAC Checker Digital Vacuum Gauge HP-VZ Vacuum pump Rotary vane pump, oil-lubricated HP-VZ1200, HP-VZ phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 77

40 Reinforcement Fabrics Sandwich Material Overview Peel Ply / Tear-Off Fabric The Peel Ply has been well-known in aircraft construction for many years. It is made of Nylon and is added into epoxy or polyester resins as the first and/or final layer of the construction. After hardening, just before further processing it has to be peeled of slowly and in a sharp angle. This result is an overall rough, bondable upper surface free from lubricating film. Sanding or cleaning of the surface is not necessary before sticking or coating. The Peel Ply can t remain in the construction therefore a red or blue tracer thread is woven into the fabric. Peel Ply / Tear-Off Fabric g/m² Weave Material Nylon y./cm 16 y./cm Article: HP-P83P3 : 3 cm, Lenght: 100 lfm = 3 m² /roll from 1 roll ² from 2 rolls ² 11,25 9,45 3,75 3,15 9,99 8,39 3,33 2,80 Article: HP-P83P4 : 4 cm, Lenght: 100 lfm = 4m² /roll from 1 roll ² from 2 rolls ² 15,00 12,60 3,75 3,15 13,32 11,19 3,33 2,80 * Up to 2,5m² the article will be delivered folded. From 3m² on a roll. Article: HP-P83P5 : 5 cm, Lenght: 100 lfm = 5 m² /roll from 1 roll ² from 2 rolls ² 16,65 14,00 3,33 2,80 14,60 12,25 2,92 2,45 Colours / Coatings Mould Release Agent Vacuum Technology Weave Style: or Twill Advantages to Work with Peel Ply Fabric: Accurate upper surface A bit rough after tearing off, absolutely clean and free of dust Ideal subsoil for bonding or further laminating / painting Saves time, no need to grind with sand-paper or removing of grinding dust : 3cm - 150cm from 5 rolls ² from 10 rolls ² 8,76 7,36 2,92 2,45 7,50 6,30 2,50 2,10 Article: HP-P83P8 : 8 cm, Lenght: 100 lfm = 8 m² from 3 rolls ² from 7 rolls ² 11,68 9,81 2,92 2,45 10,00 8,40 2,50 2,10 Article: HP-P83P10 : 10 cm, Lenght: 100 lfm = 10 m² from 5 rolls ² from 10 rolls ² 12,50 10,50 2,50 2,10 10,85 9,12 2,17 1,82 Article: HP-P83P15 : 15 cm, Lenght: 100 lfm = 15 m² Cleanser / Thinner Epoxy Resins In some cases it is desired to have a slip resistance of the component (e.g. stand space of surf boards, boat decks). After tearing off the Peel Ply the surface is ready for use. /roll from 1 roll ² from 2 rolls ² from 3 rolls ² 26,64 22,39 3,33 2,80 23,32 19,60 2,92 2,45 20,00 16,80 2,50 2,10 /roll from 1 roll ² from 3 rolls ² from 5 rolls ² 29,20 24,50 2,92 2,45 25,00 21,00 2,50 2,10 21,70 18,20 2,17 1,82 /roll from 1 roll ² from 2 rolls ² from 4 rolls ² 43,73 36,75 2,92 2,45 37,49 31,50 2,50 2,10 32,49 27,30 2,17 1,82 Fillers / Additives from 7 rolls 17,36 14,59 from 10 rolls 19,20 16,10 from 7 rolls 28,74 24,15 Mould and Casting 1. Introduce the Peel Ply as the last layer 2. After curing tear off the Peel Ply fabric Video: Peel Ply Tips + Tricks 1 Peel Ply / Tear off fabric 3. Ideal surface for further works On our website you ll find a video with more information about Working with peel ply. You ll reach the video comfortably over this QR-Code, or on our website under the category service. ² Article: HP-P83P20 : 20 cm, Lenght: 100 lfm = 20 m² /roll from 1 roll ² from 2 rolls ² from 3 rolls ² from 5 rolls ² 2,17 1,82 58,31 49,00 2,92 2,45 49,98 42,00 2,50 2,10 43,32 36,40 2,17 1,82 38,32 32,20 1,92 1,61 ² Article: HP-P83P60 : 60 cm, Lenght: freely selectable from 1m²* from 60m² from 120m² from 240m² 1,92 1,61 3,75 3,15 3,33 2,80 2,92 2,45 2,50 2,10 2,17 1,82 1,92 1,61 1,76 1,48 ² Article: HP-P83P100 : 100 cm Lenght: freely selectable from 1m²* from 200m² 1,92 1,61 3,75 3,15 3,33 2,80 2,92 2,45 2,50 2,10 2,17 1,82 1,92 1,61 1,76 1,48 Tools / Accessories phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 79

41 Reinforcement Fabrics Sandwich Material Peel Ply / Tear-Off Fabric g/m² Weave Material Nylon y./cm 16 y./cm Article: HP-P83P150 : 150 cmlenght: freely selectable from 1m²* from 150m² from 300m² * Up to 2,5m² the article will be delivered folded. From 3m² on a roll. 3,75 3,15 3,33 2,80 2,92 2,45 2,50 2,10 2,17 1,82 1,92 1,61 1,76 1,48 Polyester Non-Woven Absorber * Up to 2,5m² the article will be delivered folded. From 3m² on a roll. The non-woven Absorber has a good drapeability. Ideal for the use in connection with components containing complex curvatures or acute radius. It absorbs the excess resin which is pressed through the Perforated Release Film. It can be used effectively in single or multiple layers. Article: HP-VP80P from 1m²* 1,81 1,52 1,58 1,33 1,36 1,14 1,04 0,87 0,94 0,79 0,82 0,69 Material Polyester (black) 80 g/m² 80 cm Thickness approx. 2mm (unpressed) needled Max. temperature 185 C Colours / Coatings Mould Release Agent Mould and Casting Epoxy Resins Vacuum Technology Peel Ply / Tear-Off Fabric -Twill- 83 g/m² Weave Twill Material Nylon y./cm Article: HP-T105P125 : 125 cm Lenght: freely selectable Article: HP-T105P100 : 100 cm Lenght: freely selectable Article: HP-T105P25 : 25 cm Lenght: freely selectable Minimum quantity: 5m² 21 y./cm from 1m²* from 200m² 4,17 3,50 3,75 3,15 3,33 2,80 2,92 2,45 2,50 2,10 2,17 1,82 1,92 1,61 The Peel-Ply is very smooth and has a good drapability because of the twill weave. Article: HP-VP150P from 1m²* from 130m² Perforated Release Film Article: HP-RF30/130 * : 130 cm Thickness: 30 µm Article: HP-RF25/150 : 150 cm Thickness: 27 µm from 1m² from 130m² * from 150m² 3,75 3,15 2,68 2,25 2,14 1,80 1,61 1,35 1,34 1,13 1,13 0,95 High-tensible perforated Release Film. Ideal for the use in a vacuum bag / autoclave processing of composites and vacuum press method. the use of polyester, epoxy and phenolic resin systems. Basic purpose of the Release Film is to ensure the proper release of the helping material from the component. The Release Film is placed directly on the Peel Ply in contact with the laminate. It separates the laminate from beather / bleeder fabrics, which have no release characteristics. 3,27 2,75 2,08 1,75 1,49 1,25 1,18 0,99 1,01 0,85 0,77 0,65 0,77 0,65 Material Polyester (white) 150 g/m² 130 cm Thickness approx. 3-4mm (unpressed) needled Max. temperature 185 C Material HDPE approx. 30g/m² 130 / 150 cm Thickness 27 / 30 µm Enlogation at break > 210% Max. temperature 120 C From 1m² the article will be delivered folded. From 5m² on a roll. Tools / Accessories Fillers / Additives Cleanser / Thinner phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 81

42 Reinforcement Fabrics Vacuum Bagging Film Our Vacuum Bagging Film has good mechanical properties: It has a high tensile strength, good temperature resistance, it is flexible and it has a low permeability. The Vacuum Bagging Film is the last material in the layer-construction. It gets fixed on the mould by our Sealant-Tape (HP-ST12X3/80 or HP-ST10X3/210). * Up to 5m² the article will be delivered folded. From 5m² on a roll. Vacuum Bagging Tube Our Vacuum Bagging Tube is reasonable priced and has good mechanical properties: It has a high tensile strength, good temperature resistance, it is flexible and it has a low permeability. Moulded components could be shoved into the tube. The ends get fixed with our Sealant-Tape (HP-ST12X3/80 or HP-ST10X3/210). Colours / Coatings Sandwich Material Vacuum Technology Epoxy Resins Article: HP-VF60/260 from 1m²* from 260m² Article: HP-VF70/260 : 260 cm folded to 130 cm from 1m²* from 260m² 3,95 3,32 2,75 2,31 1,95 1,64 1,49 1,25 1,13 0,95 0,98 0,82 0,77 0,65 3,95 3,32 2,75 2,31 1,95 1,64 1,49 1,25 1,13 0,95 0,98 0,82 0,77 0,65 Material PA/PE/PA approx. 60 g/m² 260 cm (folded to 130 cm) Thickness approx. 60 µm Elongation at break > 300 % Max. temperature approx. 125 C Melting point approx. 220 C Colour transparent green epoxy- & polyester resin Material PA/PE/PA approx. 70 g/m² Thickness approx. 70 µm Elongation at break > 400 % Max. temperature approx. 127 C Colour transparent / yellowish epoxy- & polyester resin Article: HP-VFT75/150 2,75 2,31 from 300m² from 600m² 2,07 1,61 1,25 1,09 0,89 0,79 1,74 1,35 1,05 0,92 0,75 0,66 Article: HP-VFT50/020 : 20 cm Tube-ø: 12,7 cm /m from 5m from 10m from 25m from 50m from 100m from 250m Delivery information: 1m = 3m² Material PA/PE/PA approx. 75 g/m² 150 cm (Scope 300cm) Thickness ca. 75 µm Elongation at break > 300 % Max. temperature approx. 180 C Melting point approx. 220 C Colour transparent green epoxy- & polyester resin The HP-VFT50 is a PA vacuum bagging tube with good mechanical properties for applications with epoxy and polyester resins. The tube is flexible, has a high tear resistance and a temperature resistance up to 195 C. Therefore, the tube is also suitable for applications in the oven and an autoclave. Moldings can easily be pushed into the tube. The ends are removed via vacuum Sealant-Tape (HP-ST12X3/80 or HP ST10x3/210). 1,46 1,23 1,25 1,05 1,05 0,88 0,88 0,74 0,73 0,61 0,61 0,51 HP-VFT50/020 Material PA approx. 50 g/m² 20, 30, 60, 90 cm Thickness ca. 50 µm Elongation at break > 330 % Max. temperature approx. 195 C Melting point > 205 C Colour transparent green epoxy- & polyester resin Mould Release Agent Cleanser / Thinner Fillers / Additives Mould and Casting Article: HP-VF70/400 Article: HP-VF70/600 Article: HP-VF70/800 : 400 cm, folded to 200 cm : 600 cm, folded to 180 cm : 800 cm, folded to 240 cm Lenght: 100 m = 400m² / roll Lenght: 100 m = 600m² / roll Lenght: 100 m = 800m² / roll /roll from 1 roll 280,00 236,00 ² 0,70 0,59 /roll from 1 roll 420,00 354,00 ² 0,70 0,59 /roll from 1 roll 560,00 472,00 ² 0,70 0,59 HP-VF70/400, HP-VF70/600 and HP-VF70/800 are only available as a complete roll! Shipping costs on request! Article: HP-VFT50/030 : 30 cm Tube-ø: 19,1 cm /m from 5m from 10m from 25m from 50m from 100m from 250m 2,11 1,77 1,82 1,53 1,49 1,25 1,27 1,07 1,08 0,91 0,93 0,78 HP-VFT50/030 Article: HP-VFT50/060 : 60 cm Tube-ø: 38,2 cm /m from 5m from 10m from 25m from 50m from 100m from 250m 2,61 2,19 2,43 2,04 1,95 1,64 1,69 1,42 1,48 1,24 1,26 1,06 HP-VFT50/060 Article: HP-VFT50/090 : 90 cm Tube-ø: 57,0 cm /m from 5m from 10m from 25m from 50m from 100m from 250m 3,80 3,19 3,53 2,97 2,82 2,37 2,49 2,09 2,17 1,82 1,90 1,60 HP-VFT50/090 Tools / Accessories phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 83

43 Mould and Casting Epoxy Resins Vacuum Technology Sandwich Material Reinforcement Fabrics Vacuum Mesh / Infusion Mesh The Infusion Mesh has to be applied between the Vacuum Film and the Release Film to ensure the even flow of resin throughout the moulds surface. It is generally coloured in green for a better visual clarity. After the resin is cured it has to be removed from the surface of the mould area. Article: HP-IM145/100 from 1m²* 4,14 3,48 3,55 2,98 2,96 2,59 2,25 1,77 2,49 2,18 1,89 1,49 Article: HP-IM230/120 from 1m² 4,14 3,48 3,55 2,98 from 60m² from 120m² 2,96 2,59 2,25 1,77 2,49 2,18 1,89 1,49 Ideal for complex parts Ideal for large, flat parts * Up to 2,5m² the article will be delivered folded.. From 3m² on a roll. Material HDPE (green) 145 g/m² (±5%) 100 cm (±5%) Thickness approx. 1,15 mm Max. temperature 120 C Drapability good Material HDPE (green) 200 g/m² (±5%) 120 cm (±5%) Thickness approx. 1 mm Max. temperature 120 C Drapability not good Information of delivery: Delivery up to 2,5m² only rolled up without paper tube. More than 3m² on paper roll. Double Sided Adhesive Glass Tape The -Glass-Tape is used to fix different fabrics or core materials together or to fix them in the mould. Article: HP-AM075/050 /roll from 1 roll 7,90 6,64 0,087 0,073 from 5 rolls from 10 rolls from 25 rolls from 50 rolls 6,90 5,80 0,076 0,063 5,90 4,96 0,065 0,054 4,90 4,12 0,054 0,045 4,50 3,78 0,050 0,042 Spray adhesive Roll length 90 m 75 g/m² 50 mm The spray adhesive HP-FIX400 is for the fixation of different reinforcement materials from HP-Textiles to hold single layers in position. To fix reinforcing fabrics (carbon, glass, aramid, ), core materials or vacuum aids in place Application in combination with the s from HP-Textiles (Other brands should be tested) Excellent spray control with adjustable spray button and dosage valve Bonding wood, textiles, rubber, foams, many synthetic materials, paper and other base materials. Article: HP-FIX400 /pcs. from 1 pcs. from 3 pcs. from 6 pcs. from 12 pcs. from 24 pcs. from 36 pcs. from 48 pcs. 11,84 11,25 10,66 9,47 8,88 8,29 7,70 9,95 9,45 8,96 7,96 7,46 6,97 6,47 Drying Time 5 min (20 C) Heat resistance 80 C Colour milky cloudy Tools / Accessories Fillers / Additives Cleanser / Thinner Mould Release Agent Colours / Coatings phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 85

44 Mould and Casting Epoxy Resins Vacuum Technology Sandwich Material Reinforcement Fabrics Sealant-Tape The Tacky Tape is a double-sided adhesive, non-shrinking, workable and sound absorbing vacuum bag sealant tape. It is used to create a seal between the Vacuum Bagging Film and the mould and to position the Spiral Tubes. Article: HP-ST-12X3/80 /roll from 1 roll from 5 rolls from 10 rolls from 16 rolls from 48 rolls Sealant-Tape with 210 C Temperatue Resistance Permanently elastic Sealant Tape of synthetic rubber for fastening all types of vacuum films to the edges of the mould. The Sealant Tape is a double-sided adhesive, non-shrinking, workable and sound absorbing vacuum bag tape. It is used to create a seal between the Vacuum Bagging Film and the mould and to position the Spiral Tubes. Article: HP-ST10X3/210 /roll from 1 roll from 5 rolls from 10 rolls from 22 rolls from 44 rolls 10,41 8,75 0,69 0,58 9,40 7,90 0,63 0,53 8,21 6,90 0,55 0,46 7,68 6,45 0,51 0,43 6,96 5,85 0,46 0,39 11,60 9,75 0,77 0,65 10,59 8,90 0,71 0,59 9,40 7,90 0,63 0,53 8,21 6,90 0,55 0,46 7,74 6,50 0,52 0,43 Good adhesion on: Roll size: Good adhesion on: Roll size: Material Butyl Rubber Roll length 15 m 12 mm Thickness 3 mm Colour: black Max. temperature max. 80 C aluminium, steel, wood, glass, plastic incl. PE 12x3mm / roll length = 15m / 16 rolls in one box Material Sythetic Rubber Roll length 15 m 10 mm Thickness 3 mm Colour: yellow Max. temperature max. 210 C aluminium, steel, wood, glass, plastic incl. PE 10x3mm / roll length = 15m / 22 rolls in one box MTI - Hose vacuum air or gases resin System The MTI - Hose is the new innovation in the branch of vacuum infusion. This new technology will provide more quality, less costs and better mechanical properties. The pores of the membrane are very small, holding the resin back and only leaving the air through the pores. Advantages: Less investment needed for extra machines and materials Curses the work in the same way as with any other vacuum techniques Reduction of the trapped gas and air within the component part Minimisation of dry spots The results are: high process quality as well as an excellent component quality Article: HP-MTI-08 /m from 1m 5,56 4,67 from 10m 5,25 4,41 from 25m 4,87 4,09 from 50m 4,54 3,82 from 100m 4,12 3,46 Gases can escape through the membrane and be sucked off. Inner-diameter (Ø) Outer-diameter (Ø) Max. operation temperature Exhaust capacity/m by pabs. 50mpas On our website in the Video & Download Portal you ll find various work instructions and videos around the theme of the MTI -Hose for free. You ll reach our download portal comfortably over this QR-Code, or on our website under the category service. membrane Resin flow is stopped at the membrane and evenly distributed in the component. Innovation in the Vacuuminfusion 8 mm 15 mm 80 C < 50l/m EP- & UP-Resin Tools / Accessories Fillers / Additives Cleanser / Thinner Mould Release Agent Colours / Coatings phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 87

45 Reinforcement Fabrics Sandwich Material Vacuum Technology PE Vacuum-Hose - Standard - The PE-Hose is used in the vacuum-injection (vacuum-infusion) process. It can be used mainly as a disposable product in combination with our connectors POM (page 94-95). Low weight High impact strength Resistancy against acid, alkali and salt solutions is mainly used as a disposable product Article: HP-VZ1010 Outer-(Ø): 10 mm Inner-(Ø): 8 mm /roll 5 m-roll 6,65 5,59 1,33 1,12 10 m-roll 25m-roll 50m-roll 9,90 8,32 0,99 0,83 16,75 14,08 0,67 0,56 27,50 23,11 0,55 0,46 Article: HP-VZ1020 Outer-(Ø): 12 mm Inner-(Ø): 10 mm /roll 5 m-roll 7,40 6,22 1,48 1,24 10 m-roll 25m-roll 50m-roll Material Polyethylen Outer - diameter (Ø) 10 mm / 12 mm Inner - diameter (Ø) 8 mm / 10 mm Temperature range -10 C upto +40 C Shore-Hardness 50 D Colour nature 11,40 9,58 1,14 0,96 20,25 17,02 0,81 0,68 34,50 28,99 0,69 0,58 Spiral Tube for Vacuum Infusion The Spiral Tube is used as a central suction line for the vacuum moulding. It is fixed on the vacuum bagging film with our Sealant Tape. Article: HP-ST060 Diameter: 6 mm /roll 5 m-roll 6,95 5,84 1,39 1,17 10 m-roll 25m-roll 10,50 8,82 1,05 0,88 19,25 16,18 0,77 0, m 58,00 48,74 (4 x 25 m) /100 m /100 m 0,58 0,49 Article: HP-ST080 Diameter: 8 mm /roll 5 m-roll 7,95 6,68 1,59 1,34 10 m-roll 25m-roll 12,50 10,50 1,25 1,05 22,25 18,70 0,89 0, m 63,90 53,70 (4 x 25 m) /100 m /100 m 0,64 0,54 Material Polyethylen Diameter (Ø) 6mm / 8mm / 10mm Max. operation temp. +80 C Melting point +113 C Article: HP-ST100 Diameter: 10 mm /roll 5 m-roll 8,95 7,52 1,79 1,50 10 m-roll 25m-roll 14,58 12,25 1,46 1,23 23,74 19,95 0,95 0, m 70,81 59,50 (4 x 25 m) /100 m /100 m 0,71 0,60 Colours / Coatings Mould Release Agent Cleanser / Thinner Epoxy Resins Mould and Casting PU Vacuum-Hose - Flexible - PU hose with high wall thickness and excellent flexibility. Use as resin-carrying line as well as reusable suction in combination with the vacuum pump HP VZ1200. Multiple use in combination with our connectors IQS standard (page 92-94). Small bending radius by special flexibility Very good flexibility at low temperature and recovery characteristics Kink and corrosion proof Resistant against aliphatic hydrocarbons and most lubrications Non-aging in oxigene and ozone Reusable Article: HP-VZ1030 Outer-(Ø): 10 mm Inner-(Ø): 8 mm /roll special flexibly Material Polyurethan Outer - diameter (Ø) 10 mm / 12 mm Inner - diameter (Ø) 6,5 mm / 8 mm Temperature range -35 C upto +60 C Shore-Hardness 97 A Colour transparent Article: HP-VZ1040 Outer-(Ø): 12 mm Inner-(Ø): 10 mm /roll Fillers / Additives Tools / Accessories 5 m-roll 10 m-roll 25 m-roll 50 m-roll 14,00 11,76 2,80 2,35 24,60 20,67 2,46 2,07 49,75 41,81 1,99 1,67 89,50 75,21 1,79 1,50 5 m-roll 10 m-roll 25 m-roll 50 m-roll 15,75 13,24 3,15 2,65 28,20 23,70 2,82 2,37 58,75 49,37 2,35 1,97 107,50 90,34 2,15 1, phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 89

46 Mould and Casting Epoxy Resins Vacuum Technology Sandwich Material Reinforcement Fabrics Resin feed line Blade Runner During the setup for the vacuum infusion, one or more resin feed lines are placed on the part. Often a normal spiral tube or an omega channel is used. Now this one can simply be substituted by the new resin feed line. Blade Runner is more stable by the construction and the materials as a normal spiral tube. Thereby it is easier to place and fix it at the desired place. This makes the setup for the vacuum infusion faster. By its unique design the new resin feed line keeps a distance to the part surface. Blade Runner does not leave any print on the surface and minimizes air impacts especially in the area where the resin feed line is placed. Result is a higher part quality with a perfect surface and structurally better parts. With Blade Runner working hours and with it costs can be saved for the setup and the work on the surface after the infusion. The resin feed line is suitable for all parts which will be produced with the vacuum infusion process. Blade Runner can be used for prototypes, small series, batch production and for mould building. Although the resin feed line is especially for big and long parts like a rotor blade of a wind turbine. Advantages: Easier to place and fix at the desired place The setup for the vacuum infusion process will be faster The resin feed line does not leave any print on the surface Minimize air impacts under the resin feed line With a smooth surface, structurally better parts will be produced Working hours and with it costs for the setup and the working on the surface will be saved Article: HP-VZ1475 /roll 5 m-roll 10 m-roll 25 m-roll 50 m-roll 100 m-roll 39,51 33,20 7,90 6,64 69,85 58,70 6,99 5,87 157,38 132,25 6,30 5,29 287,39 241,50 5,75 4,83 534,31 448,00 5,34 4,48 Article inner ø mm Max. operation temp. C HP-VZ Innovation in the Vacuuminfusion EP- & UP-Resin Resin supply hose for the Blade Runner Using the resin supply pipe, the resin is introduced through the blade Runner Connector in the Blade Runner resin line. PVC hose with spring steel wire, highly flexible, robust, smooth interior and exterior for high pressure and vacuum resistance. Article: HP-VZ1480 /roll 5 m-roll 10 m-roll 25 m-roll 50 m-roll 100 m-roll Blade Runner -Connector Article: HP-VZ1490 Article Blade Runner -Conector for the Blade Runner Resin feed line. Tube Clip Squeezee / Squeezer Article: HP-VZ1400 for hoses up to 15mm outer-ø /pcs. from 1 pcs. from 5 pcs. from 10 pcs. 29,45 24,75 5,89 4,95 47,48 39,90 4,75 3,99 103,75 87,25 4,15 3,49 190,00 159,50 3,80 3,19 355,00 298,00 3,55 2,98 outer ø mm HP-VZ1490 inner ø mm HP-VZ Article: HP-VZ1490 HP-VZ1480 /pcs. from 1 pcs. from 5 pcs. from 10 pcs. from 25 pcs. from 50 pcs. from 100 pcs. Article: HP-VZ1425 for hoses up to 25mm outer-ø /pcs. from 1 pcs. from 5 pcs. from 10 pcs. Material PVC hose, steel spiral 5,47 4,60 4,95 4,16 4,70 3,95 4,30 3,61 4,05 3,40 3,80 3,19 The tube clibs allow an exact dosing of the resin flow and easy disconnecting of the resin line in the vacuum infusion. Squeezee Squeezer 32,90 27,65 31,26 26,27 29,61 24,88 44,45 52,90 42,23 50,26 47,61 40,01 Tools / Accessories Fillers / Additives Cleanser / Thinner Mould Release Agent Colours / Coatings Advantages: Ideal for disconnecting all tube lines Requires only a minimum of force for disconnecting resin lines Exact dosing of the resin flow is possible Designed for the everyday, industrial application tubes up to 15mm / 25mm outer diameter 90 phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 91

47 Sandwich Material Reinforcement Fabrics MTI VALVE - Automatic Valve for Vacuum Infusion - Advantages of the MTI VALVE Regulates the infusion of resin independently No resin pooling at inlet point s are evenly covered with resin Homogeneous laminate Article: HP-VZ1450 /pcs. from 1 pcs. from 5 pcs. from 10 pcs. from 50 pcs. from 100 pcs. 4,64 3,90 4,10 3,45 3,45 2,90 2,92 2,45 2,61 2,19 cross section Optimum fibre volume ratio Highest quality of parts with reproducible results Working hours and its costs can be saved Video for more information!! IQS-Connectors T-Connector Connector for the angular conjunction between three hoses. Article: HP-VZ1070 for hoses with 10mm outer-ø /pcs. from 1 pcs. from 5 pcs. from 10 pcs. Y-Connector 5,10 4,29 4,59 3,86 4,08 3,43 Article: HP-VZ1080 for hoses with 12mm outer-ø /pcs. from 1 pcs. from 5 pcs. from 10 pcs. Connector for the linear conjunction between three hoses. 5,61 4,71 5,05 4,24 4,49 3,77 Mould Release Agent Colours / Coatings Vacuum Technology IQS-Connectors The Push-In Connectors (IQS-Standard) serve as connection between the Vacuum-Hoses. They are suitable for Vacuum-Hoses in standard PE and flexible PU. Material Body Plastic/ nickel-plated brass Material Seal NBR (nitrile rubber) Temperature range 0 C up to +60 C Article: HP-VZ1120 for hoses with 10mm outer-ø /pcs. from 1 pcs. from 5 pcs. from 10 pcs. 4,88 4,10 4,39 3,69 3,90 3,28 Article: HP-VZ1130 for hoses with 12mm outer-ø /pcs. from 1 pcs. from 5 pcs. from 10 pcs. 5,91 4,97 5,32 4,47 4,73 3,98 Cleanser / Thinner Mould and Casting Epoxy Resins Connector - Straight- Connector for conjunction between two hoses with the same diameter. Article: HP-VZ1050 for hoses with 10mm outer-ø /pcs. from 1 pcs. from 5 pcs. from 10 pcs. Connector - Reducing- Article: HP-VZ1090 for reduction of hoses from 12 to 10mm /pcs. from 1 pcs. from 5 pcs. from 10 pcs. 3,50 2,94 3,15 2,65 2,80 2,35 Article: HP-VZ1060 for hoses with 12mm outer-ø /pcs. from 1 pcs. from 5 pcs. from 10 pcs. Connector for conjunction between two hoses with different diameters (10 mm and 12 mm). 3,95 3,32 3,56 2,99 3,16 2,66 4,14 3,48 3,73 3,13 3,31 2,78 Connector with Female Thread Connector with female thread G 1/4 for connecting the vacuum pump and manometer. Article: HP-VZ1100 for hoses with 10mm outer-ø /pcs. from 1 pcs. from 5 pcs. from 10 pcs. Lock Valve with Push-In Connector Article: HP-VZ1140 for hoses with 10mm outer-ø /pcs. from 1 pcs. from 5 pcs. from 10 pcs. 3,88 3,26 3,49 2,93 3,10 2,61 Article: HP-VZ1110 for hoses with 12mm outer-ø /pcs. from 1 pcs. from 5 pcs. from 10 pcs. Lock valve with push-in connector for adjusting the evacuation. 12,49 10,50 11,24 9,45 10,00 8,40 Article: HP-VZ1150 for hoses with 12mm outer-ø /pcs. from 1 pcs. from 5 pcs. from 10 pcs. 4,40 3,70 3,96 3,33 3,52 2,96 13,25 11,13 11,93 10,02 10,60 8,90 Tools / Accessories Fillers / Additives phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 93

48 Reinforcement Fabrics Sandwich Material IQS-Connectors Standard-Push-Connector POM Stud to Close Stud to close up connectors. Article: HP-VZ1160 for hoses with 10mm inner-ø /pcs. from 1 pcs. from 5 pcs. from 10 pcs. 1,17 0,98 1,05 0,88 0,94 0,78 Standard-Push-Connector Article: HP-VZ1170 for hoses with 12mm inner-ø /pcs. from 1 pcs. from 5 pcs. from 10 pcs. POM 1,29 1,08 1,16 0,97 1,03 0,86 Y-Hose Connector Article: HP-VZ1340 for hoses with 8mm inner-ø POM Connector for the conjunction between three hoses. /pcs. from 1 pcs. from 5 pcs. from 10 pcs. from 25 pcs. 1,26 1,06 1,20 1,01 1,13 0,95 1,07 0,90 Compatible with HP-VZ1010, HP-VZ1040 Article: HP-VZ1350 for hoses with 10mm inner-ø /pcs. from 1 pcs. from 5 pcs. from 10 pcs. from 25 pcs. 1,44 1,37 1,30 1,22 1,21 1,15 1,09 1,03 Compatible with HP-VZ1020 Colours / Coatings Mould Release Agent Vacuum Technology Epoxy Resins The Standard-Push-Connector (POM) serves for easy and low-priced connection between vacuum-hoses. Hose Connector - Straight - Article: HP-VZ1300 for hoses with 8mm inner-ø /pcs. from 1 pcs. from 5 pcs. from 10 pcs. from 25 pcs. Compatible with HP-VZ1010, HP-VZ1040 POM Connector for conjunction between two hoses with the same diameter. 0,58 0,49 0,55 0,47 0,52 0,44 0,49 0,42 Article: HP-VZ1310 for hoses with 10mm inner-ø /pcs. from 1 pcs. from 5 pcs. from 10 pcs. from 25 pcs. Compatible with HP-VZ1020 0,81 0,68 0,77 0,65 0,73 0,61 0,69 0,58 Material POM Temperature range 0 C up to +80 C Vac Checker Digital Vacuum Gauge Digital vacuum gauge - VAC CHECKER Field of application: Vacuum infusion Storage temperature: -20 bis +50 C Operationg temperature: -20 up to +50 C Dimensions: 250 x 165 x 55 mm : approx. 500 g Battery type: 2 mignon cells AA Measurement transducer: Absolute pressure sensor Measuring range: bis 0 mbar Vacuum resolution: 0,01 hpa / 10 micron Parameter: mmhg, Torr, mbar, hpa, micron, inh2o, inhg, Pa Overload: absolut 6 bar / 87 pis (relativ 5 bar / 72 psi) Attachments: Connection adapters for pipes with an internal diameter of: 6mm / 8mm /10mm Cleanser / Thinner Fillers / Additives Mould and Casting T-Hose Connector POM Connector for the angular conjunction between three hoses. Article: HP-VZ1320 for hoses with 8mm inner-ø Article: HP-VZ1330 for hoses with 10mm inner-ø Article: HP-VZ1440 /pcs. 1 piece 237,40 199,50 Tools / Accessories /pcs. /pcs. from 1 pcs. from 5 pcs. from 10 pcs. from 25 pcs. 1,18 1,12 1,06 1,00 0,99 0,94 0,89 0,84 Compatible with HP-VZ1010, HP-VZ1040 from 1 pcs. from 5 pcs. from 10 pcs. from 25 pcs. 1,31 1,24 1,18 1,11 1,10 1,05 0,99 0,94 Compatible with HP-VZ phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 95

49 Epoxy Resins Vacuum Technology Sandwich Material Reinforcement Fabrics Standard Manometer for Vakuum Manometer standing - class 2.5 Display area -1 bar to 0 bar (Vacuum) Bar-display (black) / PSI-display (red) Connection: G 1/4 below Diameter 50mm Article: HP-VZ1180 G1/4 below Connection: vertical (below) /pcs. from 1 pcs. from 5 pcs. from 10 pcs. 7,39 6,21 6,65 5,59 5,91 4,97 Vacuum Pump 220V / 150W Article: HP-VZ1190 G1/4 at the back Connection: horizontal (at the back) /pcs. from 1 pcs. from 5 pcs. from 10 pcs. 7,39 6,21 6,65 5,59 5,91 4,97 Compact, low-maintenance, slide vane rotary vacuum pump, with circulating oil lubricartion applicable for Vacuum-Compression & Vacuum-Infusion. For components up to approx. 10m² (depending on the layer structure). Ideal for the IMC/MTI-Process! Performance Data: Max. vacuum: 0,933 bar relative (complies to 20mbar absolute) (correspond to a pressure of more than 10 tons/m²) Max. efficency by barometic pressure: 67 litre / min (= 4m³/h) continuous operating range between 2 and 500 mbar absolute Equipment: Vane rotary vacuum pump incl. pulse damper and 220V mains supply. Suction-sided with check valve, suction filter and two connecting adapters. Delivered incl. oil and users manual! Housing Measuring system, connection, motion work Window Temperature range ambience Medium Plastic Brass Clear plastic -40 C up to +60 C max. +60 C Article: HP-VZ1250 Vacuum Pump Oil HVI32 100ml /pcs. 1 piece 7,74 6,50 Vacuum Pump 220V / 750W Compact, low-maintenance, slide vane rotary vacuum pump, with circulating oil lubricartion applicable for Vacuum-Compression & Vacuum-Infusion. For components larger than 5m² (depending on the layer structure). Ideal for the IMC/MTI-Process! Performance Data: Max. vacuum: 2mbar absolute (correspond to a pressure of more than 10 tons/m²) Max. efficency by barometic pressure: 333 liter/min (=20m³/h) continuous operating range between 2 and 400 mbar absolute Equipment: Rotary vane vacuum pump including 4 vibration dampers pre-assembled on aluminum plate. 220V mains connection including on / off switch. Suction side equipped with non-return valve, suction filter and two connection adapters including shut-off valve. Delivery includes vacuum pump oil, operating and maintenance manual! Connection adapter 1: PU vacuum line AD = 12mm; ID = 8mm (article: HP-VZ1040) Connection adapter 2: PVC suction pressure hose with steel spiral 16x3mm (article: HP-VZ1480) Article: HP-VZ2000 /pcs. 1 piece 1299, ,60 Max. valid gas and ambience emperature Motor Engine power Noise level +12 up to + 40 C 220 V / 50 Hz 750 W 19 kg 64 db(a) Fillers / Additives Cleanser / Thinner Mould Release Agent Colours / Coatings Mould and Casting Article: HP-VZ1200 /pcs. 1 piece 624,90 525,13 Connecting adapter 1: suitable for vacuum hose HP-VZ1010 & HP-VZ1040 Max. valid gas and ambience emperature Motor Engine power Noise level Electrical execution +12 up to + 40 C 220 V / 50 Hz 150 W 5,4 kg 52 db(a) Protection category IP55 Tools / Accessories Connection adapter 2: suitable for vacuum hose HP-VZ1020 & HP-VZ1040 (12mm connectors) You find a current picture in our Online-Shop You find a current picture in our Online-Shop phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 97

50 Reinforcement Fabrics Overview EPOXY RESIN SYSTEMS Epoxy resins have several application uses. Whether for marine, automotive, wind power, or the creation of complex models for example pond & swimming pools. Epoxy resins consist primarily of two components (resin and hardener). By mixing the components, a chemical reaction occurs which results in a cured plastic laminate. Properties: Free of solvents - suitable for styrofoam or styrodur High resistance to hydrolysis (osmosis protection) Good mechanical properties High adhesive force Very low shrinkage Low odour nuisance Colours / Coatings Sandwich Material Vacuum Technology Epoxy Resins PRIMING LAMINATING INFUSION ADHERE COVERING CASTING FEATURES VISCOSITY COLOUR SYSTEM / HARDENER Page Products the higher, Type the thicker FILLING 100 HP-UC K-PUR grounding, sealing 100 HP-E80FS grounding, sealing 101 HP-E30FB mould surfaces HP-E5K, HP-E60K, HP-E120K adhesives HP-E25KL, HP-E45KL O O + multi-purpose systems HP-E28L, HP-E55L, HP-E110L O laminating systems HP-E29L, HP-E56L, HP-E111L O laminating systems HP-E3000RI O - infusion / injection systems HP-E3000GL O - infusion / injection systems HP-E25D covering system (topcoat) HP-E40D covering system (topcoat) for non absorptive suboils (plastics, glass, metals, tiles ) for porous substrate (mineral, wood, ) mould surfaces, black, aluminium filled adhesing / sticking together, slightly tacky multi-purpose system,unfilled mould resin, base for filler / putties, high chemical resistant standard laminating system for many applications high level laminating system for many applications, very good physiological compatibility POT LIFE min. at 20 C processing minimum(recommended) TEMPERATURES loadability (Tg MAX in C) low black HP-UC (25 C) n. a. low brownish HP-E80FS (20 C) n. a. high (thixotropic) medium medium low low black brownish slightly yellowish bluish bluish for infusion or injection (RTM) very low transparent 1 for infusion or injection (RTM) Ipproved by DNV GL for building of boats and wind-driven power stations application with brush / roller application with brush / roller for casting thickness < 10mm very low low low very transparent 1 very transparent very transparent HP-E30FB (20 C) 115 C HP-E5K 5 5 (20 C) 80 C HP-E60K (20 C) 60 C HP-E120K (20 C) 80 C HP-E25KL 25 5 (20 C) 78 C HP-E45KL (20 C) 66 C HP-E28L (20 C) 75 C HP-E55L (20 C) 81 C HP-E110L (20 C) 75 C HP-E29L (20 C) 93 C HP-E56L (20 C) 91 C HP-E111L (20 C) 79 C HP-E30RI (25 C) 90 C HP-E120RI (25 C) 98 C HP-E300RI (25 C) 83 C HP-E15GL (25 C) 91 C HP-E200GL (25 C) 107 C HP-E300GL (25 C) 92 C HP-E25D (20 C) 45 C HP-E40D (20 C) 50 C Mould Release Agent Cleanser / Thinner Fillers / Additives Mould and Casting HP-E25DM covering system (gelcoat) 116 HP-E300GB casting system 117 HP-E45GA casting system HP-E30TLS laminating system HP-E30TDS covering system (topcoat) HP-E45T, HP-E45TM O laminating and covering system HP-E25TU, HP-25TMU O laminating and covering system 126 HP-E30S filler system application with brush / roller embedding system, for casting thickness < 50mm slightly yellowish, electrical castings up to 48V, for casting thickness <20mm laminating system for building ponds / pools couloured, topcoat for ponds, pools and boats 2 HP-E45TM: saltwater, portable water for desert terrariums, suitable for the use of UV lamps filler system for approx. osmosis treatment = very good applicable + = applicable o = conditionally applicable - = not provided n. a. = data not available = depends on the hardener = colour shift / chalking possible! Rev. 3.3 medium very low medium low high (thixotropic) low / medium low / medium pasty very transparent transparent slightly yellowish slightly yellowish coloured slightly yellowish slightly yellowish light green - flat HP-E25DM (20 C) 69 C HP-E300GB (20 C) 45 C HP-E45GA (20 C) 67 C HP-E30TLS (20 C) 50 C HP-E30TDS (20 C) 50 C HP-E45T (20 C) 50 C HP-E45TM (20 C) 66 C HP-E25TU (20 C) 69 C HP-E25TMU (20 C) 45 C HP-E30S > 100 C Tools / Accessories 98 phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 99

51 Sandwich Material Reinforcement Fabrics PUR-Foundation / Primer for Epoxy Resins Properties: HP-UC-9004 is a two component polyurethane primer/adhesion for applications with s. Especially suitable for smooth, non absorptive suboils (many plastics, glass, metals, tiles, ) Article: HP-UC-9004 PUR-Primer for EP-Resins /pcs. 375 ml 750 ml 18,90 15,88 50,40 42,35 29,90 25,13 39,87 33,51 Features & Benefits: PUR primer for sticking or laminating on smooth surfaces high adhesion, suitable for all Epoxy Resins from HP-Textiles black ground coat (primer for carbon design) for spraying, manual application with paint-brush or roller is also possible wax free, without styrene Not suitable for porous, mineral substrates (concrete, screed, ), PE, PP, PTFE, silicones or elastomers. Some of these plastics may have release agents on their surfaces (such as ABS). These release agents must be removed completely - every trace has negative effects regarding adhesion! Epoxy Mould Covering Resin The system HP-E30FB is an aluminium-filled, high-viscous combination of resin and hardener with high abrasion resistance and processing time (pot life) of about 30 minutes. Article: HP-E30FB Processing time 30min / high viscosity 1100 g 2750 g 5,5 kg 24,90 20,92 22,64 19,02 49,00 41,18 17,82 14,97 85,00 71,43 15,45 12,99 Features and Benefits: High quality mould covering resin, aluminium-filled Non-drip, without run-off on vertical surfaces, high thixotropic Produced in vacuum therefore free of air bubbles Coloured in deep black For abrasion- and breaking resistance surfaces with good thermal conductivity User friendly mixing ratios (100:10) (If necessary dilutable with XB-thinner) Mould Release Agent Colours / Coatings Mould and Casting Epoxy Resins Vacuum Technology Epoxy Priming Resin The epoxy system HP-E80FS is an unfilled, low viscous combination of resin and hardener with high adhesion to mineralized / porous foundations. Article: HP-E80FS Processing time 35min / low viscosity 800 g 1600 g 4000 g 12,8 kg 48 kg 13,50 11,34 16,88 14,18 22,90 19,24 14,31 12,03 50,90 42,77 12,73 10,69 137,90 115,88 10,77 9,05 443,17 372,41 9,23 7,76 for barrel upon request Features and Benefits: For a better sealing in the pore of mineralized foundations is add on with approx. 10% XB-thinner reasonable. Very good wetting Causes tacky-free surface Osmosis protection, filler for wooden porosities, water barrier layer Primer / Adhesion Promoter for several surfaces: thermosetting plastics, GRP- or CRP-parts, (melamine) resin plates wood, glulam (timber), plywood (sev. kinds) concrete, brick wall, cement plaster or other surfaces / substrates Corrosion Prevention for metal / aluminium (bare) Further build-up with adhesives, laminating oder covering-resins (epoxy, polyester) paints (acrylic-, alkyd-, epoxy- or polyurethane-based) 11 kg 33 kg 154,90 130,17 14,08 11,83 399,00 335,29 12,09 10,16 for barrel upon request Innovative formulation, free of DETA¹ with high styrene resistance* For following layers wet-in-wet. Another option is to work with a dry-coupling layer. Product Properties: Resin Hardener Method HP-E30FB Colouring deep black Mixing ratio weight Mixed viscosity (at 20 C) Pot life (at 20 C) minutes 30 Demouldable after hours 24 Processing temperature (optimum) C Processing temperature (minimum) C Physical Data: Viscosity Data of Unreinforced Resin: Tensile strength Hardness Density mpa s N/mm² Shore D g/cm³ ca HP (cured condition) 50 HP HP ,2 HP Tools / Accessories Fillers / Additives Cleanser / Thinner Product Properties: Resin Hardener Method HP-E80FS Colouring yellowish Mixing ratio (weight) weight Mixing ratio (volume) volume Mixed viscosity low viscosity Pot life (at 20 C) days 35 Thermal stability C 115 (after tempering) *Styrene resistance: After tempering / post-curing (15h/60 and 6h/80 C) there is no significant loading in styrene. Measuring was in pure styre for 168h at 20 C. ¹ DETA = Diethylentriamine. Component in simple formulations. Even minor variations (resin : hardener ratio, airhumidity,...) may cause to greasy, hygroscopic surfaces phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 101

52 Sandwich Material Reinforcement Fabrics Epoxy Adhesive System The Epoxy Adhesive Systems HP-E5K, HP-E60K and HP-E120K are an unfilled medium-viscous combination of resin and hardener. Features and Benefits: Applicable for metal, wood, rubber, ceramics, rigid foams and many other plastic materials Cold-hardening, workable at room-temperature Possible to add fillers Tough-hard formulation Fast-setting epoxy for high-performance applications Epoxy Adhesive System HP-E5K in an Double Syringe: Delivery includes: 5 minutes-epoxy glue in a double syringe (29g) 1x adapter / HP-L4001 (multiple applicable) 1x mixing tube / HP-L4002 You can also order separately an adapter (Article: HP- L4001) and mixing tube (Article: HP-L4002). Please have a look at page 165. Article: HP-E5K-0029 Double Syringe incl. adapter and mixing tube from 1 pcs. from 5 pcs. from 10 pcs. 8,21 6,90 0,28 0,24 7,80 6,55 0,27 0,23 7,39 6,21 0,25 0,21 Note: After use, the cures in the mixing tube so that multiple use of the mixing tube not possible is. After the application DO NOT twist the mixing tube; DO NOT change the mixing tube until reuse! Mould Release Agent Colours / Coatings Epoxy Resins Vacuum Technology Product Properties: Resin Hardener Method HP-E5K HP-E60K HP-E120K Mixing ratio weight Mixing ratio volumen Mixed viscosity medium viscous Pot life (at 20 C) minutes Hand tight (at 20 C) minutes 10 Minimum hardening time (at 20 C) hours (h) Processing temp. (optimum) C Physical Data: Viscosity mpa s ca DIN Article: HP-E5K Processing time 5min / medium viscous 200 g 500 g 1000 g 8,46 7,11 42,30 35,55 15,33 12,88 30,66 25,77 27,81 23,37 27,81 23,37 Fillers / Additives Cleanser / Thinner Mould and Casting Data of Unreinforced Resin: Tensile strength Hardening 30min at 20 C Tensile strength Hardening 24h at 20 C Shear strength (steel) Shear strength (ep-laminate) Incipient crack (steel) E-Modulus mpa*s mpa*s N/mm² N/mm² N/mm kn/mm² (cured condition) 5 15 DIN DIN DIN DIN DIN Article: HP-E120K Processing time 120min / medium viscous 750 g 1500 g 7500 g 17,40 14,62 23,20 19,51 29,95 25,17 19,96 16,77 99,90 83,95 13,32 11,19 Article: HP-E60K Processing time 60min / medium viscous 750 g 1500 g 7500 g 17,40 14,62 23,20 19,51 29,95 25,17 19,96 16,77 99,90 83,95 13,32 11,19 Tools / Accessories 15 kg 45 kg 159,42 133,97 10,63 8,93 426,91 358,75 9,48 7,97 15 kg 45 kg 159,42 133,97 10,63 8,93 426,91 358,75 9,48 7,97 for barrel upon request * suitable outlet valves, see page phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 103

53 Vacuum Technology Sandwich Material Reinforcement Fabrics Adhesive-/ Laminate Resin System The Epoxy Laminating Resin Systems HP-E25KL and HP-E45KL are unfilled, medium-viscous, chemical resistant combination of resin and hardener with short or medium processing time (pot life). They can be used as general-purpose systems for many applications: as Laminating Resin: Excellent wet-out of fibreglass, carbon and aramid fibres Cold-hardening, medium-viscosity, HP-E25KL: used from 5 C as Covering Layer Resin: Clear, tack-free surface Usable for repairs / refit of osmosis damages High resistance to many chemicals such as styrene, fuels,... Therefore, they can be used for coatings in tanks, pipelines, ponds and terrariums as Mould Resin: Usable as mould making resin (mixable with colour pigments) For coupling-layers (with fillers) as Adhesive Resin or basic for Fillers: Due to a good adhesion for bonding / fillers can be added (e. g. combination of HP-PK22 and HP-BF1) The special formulation allows the usage under difficult conditions (low temperatures, air humidity). Adhesive-/ Laminate Resin System Product Properties: Resin Hardener Method HP-E25KL HP-E45KL Colouring colourless light blue-green Mixing ratio weight Mixing ratio volumen Mixed viscosity (at 20 C) mpa s (medium viscous) Mixed viscosity (at 25 C) mpa s (medium viscous) Pot life (at 20 C) minutes Demouldable after h <18 <30 Processing temperature (optimum) C Processing temperature (minimum) C 5 15 Physical Data: Viscosity (at 25 C) mpa s Density (at 25 C) g/cm³ (NH)-Equivalent g/eq Epoxy-Equivalent g/eq Data of Unreinforced Resin: Tensile strength N/mm² Elongation % Flexural strength N/mm² HP ,14-1,16 1,01-1,03 HM HM HM (cured condition) HM HM HM Cleanser / Thinner Mould Release Agent Colours / Coatings Epoxy Resins HP-E25KL / HP-E45KL are also free of nonylphenol and contain no reactive diluents! Please note: HP-E25KL and HP-E45KL come with a similar resin. Both hardeners can be mixed among themselves. E-Modulus kn/mm² Hardness Shore D Glass transition temperature Tg MAX % HP-E25KL Processing time 25min HP-E45KL Processing time 45min 3,1 3 HM HP HP04.08 Fillers / Additives Mould and Casting 400 g 800 g 1600 g 9,90 8,32 24,75 20,80 13,50 11,34 16,88 14,18 22,90 19,24 14,31 12,03 Tools / Accessories 4 kg 12,8 kg 48 kg 50,90 42,77 12,73 10,69 137,90 115,88 10,77 9,05 443,17 372,41 9,23 7,76 for barrel upon request * suitable outlet valves, see page phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 105

54 Vacuum Technology Sandwich Material Reinforcement Fabrics Standard Laminating Resin The Epoxy-Systems HP-E28L, HP-E55L and HP-E110L are unfilled, low viscous 2-component combinations of resin and hardeners with various processing times between minutes. These are low-priced standard laminating resins with good dimensional stability and impregnating behaviour. Note: The resin components of HP-E28L, HP-E55L and HP-E110L are identical. Furthermore, the hardeners are mixable among themselves. hp-e28l, HP-E55L and HP-E110L are free of Nonylphenol and DETA. Features: Very good wetting properties of the reinforcing fibres Cold setting, de-mouldable at room temperature Free of solvents and fillers Improved physiological compatibility (no R62 labelling) Practically shrink-free curing Temperature resistance (Tg Max) up to 81 C (HP-E55L) Standard Laminating Resin Product Properties: Resin Hardener Method HP-E28L HP-E55L HP-E110L Colouring Slyghtly bluish / green Mixing ratio weight Mixing ratio volumen Mixed viscosity minutes low viscous Pot life (at 20 C) minutes Demouldable after (at 20 C) hours (h) Demouldable after (at 40 C) hours (h) Processing temperature optimal C Processing temperature minimal C Physical Data: Viscosity (at 25 C) Density (at 20 C) (NH)-equivalent Epoxy-equivalent mpa s g/cm³ g/eq g/eq Data of Unreinforced Resin: Tensile strength N/mm² Elongation % Flexural strength MPa HP ,1-1,15 0,96-1,04 HM HM HM (cured condition) HM HM HM Cleanser / Thinner Mould Release Agent Colours / Coatings Mould and Casting Epoxy Resins As impregnating and laminating resins in the areas of Mould-making and fixture construction, Industrial parts of sports equipment, model making Orthopaedic Vehicle substructures / motorsport Boat construction, E-Modulus (bending test) GPa Hardness (tempering 2h/120 C) Shore D Glass transition temperature Tgmax C HP-E28L HP-E55L Processing time 28min Processing time 55min HP-E110L Processing time 110min 700 g 1400 g 2800 g 12,50 10,50 17,86 15,00 19,90 16,72 14,21 11,94 36,90 31,01 13,18 11,08 3 3,1 HM HP HP04.08 Tools / Accessories Fillers / Additives 7 kg 42 kg 74,90 62,94 10,70 8,99 381,80 320,84 9,09 7,64 for barrel upon request * suitable outlet valves, see page phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 107

55 Sandwich Material Reinforcement Fabrics High Strength Thermosetting Resin The Epoxy-Systems HP-E29L, HP-E56L and HP-E111L are unfilled, low viscous 2-component combinations of resin and hardeners with various processing times between minutes. Compared to standard resins our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance. Of course it is possible to add filling agents like microballoons, cotton flocks, thixotrophypowder or colour pigments from HP-Textiles. A combination with suitable gelcoats, based on polyester, polyurethane and epoxy, is achievable as well. Note: The resin components of HP-E29L, HP-E56L and HP-E111L are identical. Furthermore, the hardeners are mixable among themselves. hp-e29l, HP-E56L und HP-E111L are free of Nonylphenol and DETA. High Strength Thermosetting Resin Product Properties: Resin Hardener Method HP-E29L HP-E56L HP-E111L Colouring colourless light blue-green Mixing ratio weight Mixing ratio volumen Mixed viscosity minutes low viscous Pot life (at 20 C) minutes Demouldable after (at 20 C) hours (h) Demouldable after (at 40 C) hours (h) Processing temperature optimum C Processing temperature minimum C Physical Data: Mould Release Agent Colours / Coatings Vacuum Technology Features: Very good wetting properties of the reinforcing fibres Cold setting, demouldable at room temperature Free of solvents and fillers Improved physiological compatibility (no R62 labelling) Practically shrink-free curing Temperature resistance (Tg Max) up to 93 C (HP-E29L) Viscosity (at 25 C) mpa s Density (at 20 C) g/cm³ (NH)-Equivalent g/eq Epoxy-Equivalent g/eq Data of Unreinforced Resin: Tensile strength N/mm² Elongation % HP ,1-1,15 0,96-1,04 HM HM HM (cured condition) HM HM Cleanser / Thinner Flexural strength N/mm² k.a. HM Mould and Casting Epoxy Resins Special formulation supports faster curing and increased strength, especially at higher temperatures Individual colouring is available upon request Excellent adhesion to the In-Mould Coating of HP-Textiles In total better characteristic values of approx. 10% (Tg MAX, tensile strength etc.) than those of standard systems! As impregnating and laminating resins in the areas of Mould-making and fixture construction, Industrial parts of sports equipment, model making Orthopaedic Vehicle substructures / motorsport Boat construction Aircraft construction (ultralight aviation) E-Modulus (bending test) kn/mm² Hardness (after curing 2h/120 C) Shore D Glass transition temperature Tgmax C HP-E29L HP-E56L Processing time 25min Processing time 55min HP-E111L Processing time 110min 1400 g 2800 g 7 kg 42 kg 23,90 20,08 17,07 14,35 42,90 36,05 15,32 12,88 89,00 74,79 12,71 10,68 490,00 411,76 11,67 9,80 > 3 HM HP HP04.08 The mechanical properties are verified by independent departments like the University of Applied Sciences in Osnabrück / Lower Saxony, Germany. for barrel upon request * suitable outlet valves, see page 165 Tools / Accessories Fillers / Additives phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 109

56 Mould and Casting Epoxy Resins Vacuum Technology Sandwich Material Reinforcement Fabrics Injection-Resin / Laminating Resin The Base of the series HP-E3000RI is an unfilled Epoxy-Resin, which is mixable with different hardeners for several applications. The hardeners HP-E30RI and HP-E300RI allow pot-life times between 30 and 300 minutes. Furthermore, the special hardener HP-E120RI provides higher temperature stabilities. The injection- / infusion-resins of the series HP-E3000RI show very low viscosities, what supports excellent wetout and flow properties. The series is usable for hand-laminating, too. Features and Benefits: Excellent wet-out in infusion- or injection-process Warm-hardening, demouldable at higher temperature High dynamic and static strength Usable for RTM / RI - process For application in modelmaking, automotive-industry and building of boats and rotor blades Glass transition temperature 98 C (with hardener HP-E120RI) With thixotroping agent HP-PK22 applicable for hand-laminating 1) Expected values. Will be substituted by external laboratory after validation. According to DIN EN ISO 527. Product Properties: Resin Hardener Method HE3000RI HTE30RI HTE120RI HTE300RI Colour colourless colourless / slightly amber Colour gardner < 2 < 2 Mixing ratio weight Pot life (at 20 C) minutes Processing temperature optimum C Physical Data: Viscosity (at 25 C) mpa s Data of unreinforced Resin: 1 ) Density (at 25 C) g/cm³ Tensile strength mpa Elongation % Flexural strength mpa E-Modulus kn/mm² Glass transition temperature C Hardness Shore D PM (cured condition) PM PM PM PM PM PM PM Data of unfilled samples. Curing schedule with hardener : HP-E30RI h at C 24h/20 C, and 5h/60 C and 6h/80 C HP-E300RI h at C 24h/20 C, and 5h/60 C and 6h/80 C HP-E120RI h at C 24h/20 C, and 5/60 C und 6h/80 C and 2h/120 C Injection-Resin / Laminating Resin This Infusion Resin HP-E300RI was developed in cooperation with the University of Osnabrück and tested by the Ignition Racing Team of Hochschule Osnabrück. It was used among the others for the construction of the vehicle (carbon fibre monocoque) of the Formula Student. Article: HP-HE3000RI Quantity 0,75 kg 2,4 kg 9 kg 25 kg required amount of hardener resin 0,75 kg 31,95 26,85 12,78 10,74 2,4 kg 82,71 69,50 10,34 8,69 9 kg 279,00 234,45 9,30 7,82 60 kg 1659, ,90 8,30 6,97 * suitable outlet valves, see page 150 * Formula student car IRTe16 HS Osnabrück 30 min 200 min 300 min Article: HP-HTE30RI Processing time Quantity 0,75 kg 2,4 kg 9 kg 25 kg 50 kg Quantity 0,75 kg 2,4 kg 9 kg 25 kg 50 kg Quantity 0,75 kg 2,4 kg 9 kg 25 kg 50 kg hardener approx. 30min. (at 20 C) 16,54 13,90 22,05 18,53 47,01 39,50 19,59 16,46 141,61 119,00 15,73 13,22 368,31 309,50 14,73 12,38 708,05 595,00 14,16 11,90 Article: HP-HTE120RI hardener Processing time approx. 200min. (at 20 C) 15,95 13,40 21,26 17,87 44,98 37,80 18,74 15,75 135,96 114,25 15,11 12,69 344,98 289,90 13,80 11,60 655,21 559,00 13,30 11,18 Article: HP-HTE300RI hardener Processing time approx. 300min. (at 20 C) 14,16 11,90 18,88 15,87 39,87 33,50 16,61 13,96 112,93 94,90 12,55 10,54 289,77 243,50 11,59 9,74 546,21 459,00 10,92 9,18 Tools / Accessories Fillers / Additives Cleanser / Thinner Mould Release Agent Colours / Coatings 110 phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 111

57 Reinforcement Fabrics Resin System with a Statement of Approval of the German Lloyd The whole system has a statement of approval of the German Lloyd for the building of boats and wind-driven power stations. (Approval No. WP HH) The basis of the series HP-E3000GL is an unfilled Epoxy-Resin, which is mixable with different hardeners for every individual purpose. A special feature of this series is a high initial glass transition temperature (Tg) by hardening at room temperature. The use of the hardener HP-E200GL increases the maximum glass transition temperature (Tg MAX) up to 107 C. The series also has a high transparency, so that it is very suitable for visible carbon parts. Resin System with a Statement of Approval of the German Lloyd The whole system has a statement of approval of the Germanischer Lloyd for the building of boats and wind-driven power stations. Article: HP-HTE15GL hardener Processing time approx. 15min. (at 20 C) Quantity 0,75 kg 16,90 14,20 22,53 18,93 Colours / Coatings Mould and Casting Epoxy Resins Vacuum Technology Sandwich Material Features and Benefits: Extremely low viscosity, so it has a very good fibre wet-out High static and dynamic strength Pot life time can be freely adjusted between 15 min hardener (HP-E15GL) and 300 min (hardener HP-E300GL) Glass transition temperature (Tg max) up to 107 C (hardener HP-E200GL) Vacuum-infusion methods (IMC/MTI, RI, VARI, SCRIMP ) Pressure injection methods (RTM, RIM) Filament winding Hand laminating Building of boats and wind-driven power stations Optical application such as visible carbon parts (HP-E200GL) Product Properties: Resin Hardener Method HE3000GL HTE15GL HTE200GL HTE300GL Colour colourless yellowish colourless, clear Colour gardner < 1 < 5 < 1 < 1 Mixing ratio weight Pot life (at 20 C) minutes Processing temperature optimum C Physical Data: Viscosity (at 25 C) mpa s PM Data of unreinforced Resin: (cured condition) Density (at 25 C) g/cm³ ,16 1,16 1,16 ISO1183-A Tensile strength mpa ISO 527 Elongation % 5,1 6,9 7,8 ISO 527 Flexural strength mpa ISO 178 E-Modulus kn/mm² ISO 178 Glass transition temperature C HP04.08 Hardness Shore D after Temp. Data of unfilled samples. Curing schedule with hardener : HP-E30RI h at C 5h/60 C and 6h/80 C HP-E300RI h at C 5h/60 C and 6h/80 C HP-E120RI h at C 5h/60 C and 6h/80 C (and for Tg max. 2h/120 C) Article: HP-HE3000GL Quantity 0,75 kg 2,4 kg 9 kg 25 kg required amount of hardener resin 0,75 kg 32,70 27,48 13,08 10,99 2,4 kg 84,97 71,40 10,62 8,93 9 kg 286,79 241,00 9,56 8,03 60 kg 1717, ,48 8,59 7,22 * suitable outlet valves, see page min 200 min 300 min 2,4 kg 9 kg 25 kg 50 kg Article: HP-HTE200GL hardener Processing time approx. 200min. (at 20 C) Quantity 0,75 kg 2,4 kg 9 kg 25 kg 50 kg Article: HP-HTE300GL hardener Processing time approx. 300min. (at 20 C) Quantity 0,75 kg 2,4 kg 9 kg 25 kg 50 kg 48,49 40,75 20,21 16,98 144,94 121,80 16,10 13,53 380,68 319,90 15,23 12,80 736,61 619,00 14,73 12,38 16,07 13,50 21,42 18,00 46,29 38,90 19,29 16,21 136,73 114,90 15,19 12,77 355,81 299,00 14,23 11,96 689,01 579,00 13,78 11,58 14,88 12,50 19,83 16,67 41,53 34,90 17,30 14,54 117,81 99,00 13,09 11,00 296,31 249,00 11,85 9,96 570,01 479,00 11,40 9,58 Tools / Accessories Fillers / Additives Cleanser / Thinner Mould Release Agent 112 phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 113

58 Vacuum Technology Sandwich Material Reinforcement Fabrics Covering Resin System The Epoxy Topcoat Systems HP-E25D, HP-E40D and HP-E25DM are unfilled, low-viscous combinations of resin and hardener with higher UV-resistance. Features and Benefits: Sealing for metal, wood, plastics, concrete, screed Causes clear, non-gluey surfaces Higher resistance to UV radiation, low tendency to yellowing Excellent mechanical properties, high impact strength Osmosis protection, filler for wooden porosities Carbon Look Laminates Water barrier layer, surface protection, varnish By adding the colour paste HP-FP (page 145) it is colour-adjustable! Product Properties: Resin Hardener Method HP-E25D HP-E40D HP-E25DM HP-E25D HP-E40D HP-E25DM Chemical nature Bisphenol / Epichlorhydrin resin Colouring without colour / transparent Mixing ratio (at 20 C) weight Mixing ratio (at 20 C) volume Mixed viscosity low viscous medium viscous Pot life (at 20 C) minutes Covering Resin System Article: HP-E25D Processing time 25min / low viscous 400 g 800 g 1600 g 4 kg 12,8 kg 48 kg 12,30 10,34 30,75 25,85 18,90 15,88 23,63 19,85 28,90 24,29 18,06 15,18 58,90 49,50 14,73 12,38 172,90 145,29 13,51 11,35 536,61 450,93 11,18 9,39 Cleanser / Thinner Mould Release Agent Colours / Coatings Mould and Casting Epoxy Resins Walkable (Shore D 40 after) h Processing temperature (minimum) C Physical Data: Viscosity Data of Unreinforced Resin: Tensile strength mpa s N/mm² Elongation % Flexural strength E-Modulus N/mm² kn/mm² Glass transition temperature Tg MAX % (cured condition) DIN DIN DIN DIN DIN HP Article: HP-E40D Processing time 40min / low viscous 750 g 1500 g 3000 g 7,5 kg 37,5 kg 15,90 13,36 21,20 17,81 24,90 20,92 16,60 13,95 39,90 33,53 13,30 11,18 89,00 74,79 11,87 9,97 429,00 360,50 11,44 9,61 Article: HP-E25DM Processing time 25min / medium viscous 400 g 800 g 1600 g 4 kg 12,8 kg 48 kg 12,30 10,34 30,75 25,85 18,90 15,88 23,63 19,85 28,90 24,29 18,06 15,18 58,90 49,50 14,73 12,38 172,90 145,29 13,51 11,35 536,61 450,93 11,18 9,39 Tools / Accessories Fillers / Additives for barrel upon request * suitable outlet valves, see page 150 To increase the colou0r stability, we recommend the addition of about 3% UV stabilizer HP-BEL91 (see page 156) phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 115

59 Reinforcement Fabrics Casting Resin System -Transparent- The Epoxy-System HP-E300GB is an unfilled, low-viscous combination of resin and hardener with processing time (pot life) of more than 300 minutes.* Usable for epoxy casting of medium thickness (up to approx. 50mm*) and slightly increased temperatures.* HP-E300GB is free of nonylphenol and contains no active diluents! Casting Resin System - Semi-Transparent - The Epoxy-System HP-E45GA is an unfilled, medium-viscous combination of resin and hardener with processing time (pot life) of approx. 45 minutes.* Usable for epoxy casting of medium thickness (up to approx. 20mm*) HP-E45GA is free of nonylphenol and contains no active diluents! Colours / Coatings Sandwich Material Article: HP-E300GB Processing time > 300min / low viscous 1350 g 3375 g 22,95 19,29 17,00 14,29 51,55 43,32 15,27 12,84 Features and Benefits: Transparent, low shrink-casting with tacky-free surfaces Very good flow behaviour (low-viscous) Cold-hardening, demouldable at room-temperature, applicable at slightly increased temperatures High fillable casting resin Causes pressure-resistant and impact-resistant (tough) moulds / components with high strength and very low shrinkage Article: HP-E45GA Processing time 45min / medium viscous 400 g 800 g 9,90 8,32 24,75 20,80 13,95 11,72 17,44 14,65 Features and Benefits: Semi-transparent, low shrink-casting with tacky-free surfaces Good flow behaviour (medium-viscous) Cold-hardening, demouldable at room-temperature High fillable casting resin Cause pressure-resistant and impact-resistant (tough) moulds / components with high strength Mould Release Agent Vacuum Technology 8,1 kg 13,5 kg 40,5 kg 99,80 83,87 12,32 10,35 155,93 131,03 11,55 9,71 429,80 361,18 10,61 8,92 for barrel upon request Industrial Modelling / Hobby Modelling / Boatbuilding: Foundry patterns, die plates, reproduction patterns Building of medium moulds and castings Encapsulation of decorative elements Levelling compound / injection resin for structural repairs 1600 g 4 kg 12,8 kg 23,95 20,13 14,97 12,58 53,75 45,17 13,44 11,29 129,75 109,03 10,14 8,52 for barrel upon request Industrial Modelling / Hobby Modelling / Boatbuilding: Foundry patterns, die plates, reproduction patterns Building of small moulds and castings with slightly yellow colour Encapsulation of decorative elements Levelling compound Dielectric resin for electrical embedding up to 48 Volts Cleanser / Thinner Epoxy Resins * suitable outlet valves, see page 150 Product Properties: Resin Hardener Method HP-E300GB Colouring transparent Mixing ratio weight Mixing ratio volume * suitable outlet valves, see page 150 Product Properties: Resin Hardener Method HP-E45GA Colouring transparent yellowish Mixing ratio weight Mixing ratio volume Fillers / Additives Mould and Casting Mixed viscosity Pot life (100g at 20 C) minutes Demouldable after* (at 20 C) hours Demouldable after (at 30 C) hours Processing temperature (optimum) C Physical Data: Viscosity mpa s low viscous > 300 < 48 < DIN Mixed viscosity Pot life (100g at 20 C) minutes Demouldable after* (at 20 C) hours Demouldable after (at 30 C) hours Processing temperature (optimum) C Physical Data: Viscosity mpa s medium viscous 45 < 12 < DIN Tools / Accessories Data of Unreinforced Resin: (cured condition) Density g/cm³ 1,1 Hardness Shore D 75 Colour (mixed) transparent / colourless * Depends on geometry and total amount of casting. Specifications after hardening 7d at 20 C. Data of Unreinforced Resin: (cured condition) Density g/cm³ 1,1 Hardness Shore D 82 Colour (mixed) slightly yellowish * Depends on geometry and total amount of casting. Specifications after hardening 7d at 20 C phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 117

60 Mould and Casting Epoxy Resins Vacuum Technology Sandwich Material Reinforcement Fabrics Overview Pondbuilding with Epoxy-Systems Realize your dream of owning a swimming pool/pond or Koi pond. The epoxy systems HP-E30TLS and HP-E30TDS are free of solvents (virtually odorless) and therefore not only for outdoor installations, but also perfectly suitable for use indoors. They provide the highest quality and a user-friendly processing, whether professional pond builder or home users with little previous knowledge. Advantages of Glass fiber reinforced plastic against pond liner: More durable than any foil Very high strength e.g. towards animal claws, stones, shock loads, Wrinkle-free pool design, limitless creative freedom Trouble-free incorporate of connections such as skimmers, draining aways, underwater lighting, and so on... May at any time be expanded and redesigned From one piece - no welding! Building a High-Quality glass Coating with Epoxy Resin: 1. Underground (mineral): Concrete, plaster, screed, brickwork, Primer: Epoxy Resin HP-E80FS - Barrier against moisture and at the same primer 3. Laminate: Epoxy Resin HP-E30TLS in conjunction with the fibreglass fabric HP-B320E or HP-B450E 4. Protective coating: Epoxi-Covering-Resin-System HP-E30TDS - high water & chemical resistance - available in different RAL colours, e.g. as light blue, light gray, anthracite grey, chrome oxide green, ivory, deep black Laminate Structure: Multiaxial Glass Fabrics HP-B320E, HP-B450E To increase the color stability, we recommend using an additional transparent topcoat HP-E30TDS-0000 incl. Approx. 3% UV stabilizer HP-BEL91. These products can be ordered optionally. 4. Covering Resin System HP-E30TDS 3. Laminating Resin HP-E30TLS 3. Laminating Resin HP-E30TLS 2. Primer HP-E80FS 1. Underground (concrete, plaster, screed, stonework,...) Covering and Laminating Epoxy-System The Epoxy-System HP-E30TLS is an unfilled two-component combination of resin and hardener with medium working time (pot life). It is versatile for surface coating and laminating. Features and Benefits: good wet-out of reinforcement fibres very good mechanical and chemical properties Universally suitable for pre-sealing or / and laminating of fibre reinforced surface coating in system configuration between primer (HP-E80FS) and topcoat (HP-E30TDS) Completely free of solvents, therefore - direct working on PU- or PS/EPS foam is possible - suitable for indoor use (fish ponds, pools, tanks, ) Using for tough, high quality, fibre reinforced coatings in following: - outdoor AND INDOOR swimming pools, water tanks, fish and aquaculture ponds - roofs and rooftops - balcony sealing - agricultural and industrial coantings For best results, we recommend a finish with a suitable epoxy-topcoat (like HP-E30TDS)! Product Properties: Resin Hardener Method Mixing ratio weight HP-E30TLS Mixed viscosity (at 20 C) low viscous Pot life (at 20 C) minutes 30 Walkable after (at 20 C) hours 24 Walkable after (at 15 C) hours 48 Processing temperature (optimum) C Processing temperature (minimum) C 15 Physical Data: Viscosity mpa s Data of Unreinforced Resin: Tensile strength N/mm² Elongation % DIN (cured condition) 40 DIN DIN Tools / Accessories Fillers / Additives Cleanser / Thinner Mould Release Agent Colours / Coatings Instruction: Pond coating On our website you ll find an instruction with more information about Pond Coating with Epoxyresin. You ll reach the instruction comfortably over this QR-Code, or on our website under the category service. you can find the Pondbuilding Epoxy Resin Systems on the next pages Flexural strength N/mm² E-Modulus kn/mm² Temperature resistance (Tg MAX) C Specifications after hardening 7d at 23C. 75 DIN ,75 DIN HP phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 119

61 Vacuum Technology Sandwich Material Reinforcement Fabrics Covering and Laminating Epoxy-System User-friendly packaging units: + Ready to mix, no weighing necessary + Hardener drains completely into the resin and mixed there Article: HP-E30TLS-1.4 Article: HP-E30TLS-3 Processing time 30min / low viscous Unit of quantity: 1 bundle = 1400 g / bundle from 1 bundle from 2 bundle from 5 bundle For Self-Dosage: Dispatch by Parcel Service + Partial taking out is possible Article: HP-E30TLS Processing time 30min / low viscous 23,90 20,08 17,07 14,34 22,71 19,08 16,22 13,63 22,23 18,67 15,88 13,34 Processing time 30min / low viscous Unit of quantity: 1 bundle = 3000 g / bundle from 1 bundle from 2 bundle from 5 bundle Dispatch by forwarding agency 39,85 33,49 13,28 11,16 37,86 31,82 12,62 10,61 37,06 31,14 12,35 10,38 Coating and Laminating Epoxy-System The Epoxy-System HP-E30TDS is a filled and thixotropic two-component combination of resin and hardener with medium working time (pot life). It is versatile for high quality surface coatings. Features and Benefits: sealing for wood, metal, several plastics (especially frp), screed and concrete very good adhesive properties, high abrasion-reasistance very high chemical and mechanical resistance distinct osmosis protection free of solvents, can be thinned with HP-XB upon demand (maximum up to 5%) Used as high quality surface coating in following areas: - boatbuilding, (especially for osmosis protection in underwater areas) - outdoor and indoor swimming pools, water tanks, fish and aquaculture ponds - roofs and rooftops - balcony sealing - agricultural and industrial coantings - as surface for low temperature moulds (< 50 C) Available in several colours. By adding the colour paste HP-FP (page 145) it is colour-adjustable! In order to achieve best results we recommend the use in combination with our primer / sealer (HP-E80FS) and / or laminating resin (HP-E30TLS). Product Properties: Resin Hardener Method Cleanser / Thinner Mould Release Agent Colours / Coatings Mould and Casting Epoxy Resins 400 g 800 g 1600 g 4 kg 12,8 kg 48 kg Dispatch by Parcel Service 9,90 8,32 24,75 20,80 13,50 11,34 16,88 14,18 22,90 19,24 14,31 12,03 50,90 42,77 12,73 10,70 137,90 115,88 10,77 9,05 443,17 372,41 9,23 7,76 Video: Roof Coating On our website you ll find a video with more information about a Roof Coating. You ll reach the video comfortably over this QR-Code, or on our website under the category service. Mixing ratio weight Mixed viscosity (at 20 C) Pot life (at 20 C) minutes Walkable after (at 20 C) hours Walkable after (at 15 C) hours Processing temperature (optimum) C Processing temperature (minimum) C Physical Data: Viscosity mpa s Data of Unreinforced Resin: Tensile strength N/mm² Elongation % HP-E30TDS (cured condition) DIN DIN DIN Tools / Accessories Fillers / Additives Flexural strength N/mm² 75 DIN E-Modulus kn/mm² Temperature resistance (Tg MAX) C Specifications after hardening 7d at 23C. 2,75 DIN HP04.08 The epoxi system HP-E30TDS has a low yellowing potential. Under UV, chlorine and weather conditions (such as increased outside temperatures) are s generally not completely color-stable over the long term. To increase the color stability, we recommend using an additional transparent topcoathp-e30tds-0000 incl. Approx. 3% UV stabilizer HP- BEL91. These products can be ordered optionally phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 121

62 Vacuum Technology Sandwich Material Reinforcement Fabrics Surface and Covering Epoxy-System Covering System: Article: HP-E30TDS Processing time 30min / thixotrop Colour: Clear 400 g 800 g 1600 g 4 kg 12,8 kg 48 kg 9,90 8,32 24,75 20,80 13,50 11,34 16,88 14,18 22,90 19,24 14,31 12,03 50,90 42,77 12,73 10,70 137,90 115,88 10,77 9,05 443,17 372,41 9,23 7,76 Dispatch by Parcel Service Available in several colours or clear, adjustable with color paste HP-FP to RAL (page...) To increase color stability, we recommend the addition of our UV-Absorber HP-BEL91 (page 157) industrial coatings agricultural coatings Surface and Covering Epoxy-System Covering System: Article: HP-E30TDS-1.5 Processing time 30min / thixotrop Unit of quantity: 1 bundle = 1500 g Colour: / bundle from 1 bundle from 3 bundle from 5 bundle Article: HP-E30TDS-1.5 Processing time 30min / thixotrop Unit of quantity: 1 bundle = 1500 g Article: HP-E30TDS-3.3 Processing time 30min / thixotrop Unit of quantity: 1 bundle = 3300 g RAL 6020 = chrome green Colour: RAL 6020 = chrome green RAL 9005 = deep black RAL 9005 = deep black 27,90 23,45 18,60 15,63 27,06 22,75 18,04 15,16 26,50 22,28 17,66 14,85 / bundle from 1 bundle from 3 bundle from 5 bundle Article: HP-E30TDS-3.3 Processing time 30min / thixotrop Unit of quantity: 1 bundle = 3300 g 44,90 37,73 13,61 11,43 43,55 36,60 13,20 11,09 42,65 35,84 12,93 10,86 Cleanser / Thinner Mould Release Agent Colours / Coatings Epoxy Resins Colour: / bundle from 1 bundle from 3 bundle RAL 1014 = ivory 35,47 29,82 23,65 19,88 34,42 28,92 22,95 19,28 Colour: / bundle from 1 bundle from 3 bundle RAL 1014 = ivory 59,20 49,75 17,78 15,08 57,42 48,25 17,24 14,62 Fillers / Additives Mould and Casting Article: HP-E30TDS-1.5 Processing time 30min / thixotrop Unit of quantity: 1 bundle = 1500 g / bundle from 1 bundle Article: HP-E30TDS-3.3 Processing time 30min / thixotrop Unit of quantity: 1 bundle = 3300 g Colour: RAL 5012 = light blue Colour: RAL 5012 = light blue RAL 7015 = anthracite grey RAL 7015 = anthracite grey RAL 7035 = light grey RAL 7035 = light grey 29,90 25,13 19,93 16,75 / bundle from 1 bundle 49,90 41,93 15,12 12,71 from 5 bundle 33,71 28,33 22,47 18,89 from 5 bundle 56,24 47,26 16,89 14,32 Tools / Accessories from 3 bundle from 5 bundle 29,00 24,38 19,33 16,25 28,40 23,87 18,93 15,91 from 3 bundle from 5 bundle 48,40 40,67 14,67 12,32 47,40 39,83 14,36 12,07 The 1.5 kg packages are shipped by parcel service. The 3.3kg packages are shipped exclusively by forwarding agency phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 123

63 Epoxy Resins Vacuum Technology Sandwich Material Reinforcement Fabrics Epoxy-System for Aquariums and Terrariums Our terrarium / aquarium systems have been developed specifically for the use in these areas. The sealed surfaces are impact, scratch and bite resistant. The result is a waterproof barrier which can be easily cleaned and disinfected. A nesting of bacteria and pathogens into the ground is prevented. Features and Benefits: As Laminating and Covering System Good wetting of the reinforcing fibres Make clear and tack-free surface Cold curing Good strength Sealing of metal, wood, various plastics and mineral substrates High surface protection, excellent hygiene and water barrier High impact resistance The user can add fillers to modify the desired properties. So it can be simulated by adding color pigments ground or sand colors. Furthermore, it is possible to imitate mineral surfaces during curing by sprinkling sand or small stones. By stirring in cotton flocks (HP-BF1) and thixotropypowder (HP-PK22), the material can thicken to a paste, by which the user can make irregular surfaces. Our systems differ in consistency; it can be used for porous substrates such as open-pored wood, fluid systems with very good peration properties. Medium (viscous) systems are used on smooth surfaces to prevent premature sagging. Styrofoam / Styrodur and other plastics are not attacked. You can select between different processing times. For larger projects, pot lifes are of 45 minutes. The experienced user often only needs 25 min processing time. For desert terrariums with UV-term stress, there are special non-yellowing systems with high resistance to artificial lighting (HP-E25TU / TMU). Epoxy-System for Aquariums and Terrariums Product Properties: HP-E45T HP-E45TM HP-E25TU HP-E25TMU Colour Mix ratio (resin : hardener) weight volume light yellow / clear 100:60 100:60 100:60 100:60 100:66 100:70 100:64 100:66 Mixed viscosity (at 20 C) mpa s low viscous medium viscous low viscous medium viscous Pot life (at 20 C) minutes Tack-free hours Processing temperature (optimum) C Processing temperature (minimum) C Consumption as a sealing (unreinforced, unfilled) 400 g 800 g 1600 g 4 kg 12,8 kg 48 kg g/m² Article: HP-E45T Processing time 25min / low viscous 11,90 10,00 29,75 25,00 15,35 12,90 19,19 16,13 27,55 23,15 17,22 14,47 58,35 49,03 14,59 12,26 138,80 116,64 10,84 9,11 443,17 372,41 9,23 7,76 approxy 400g/m² (in two coats) Article: HP-E45TM Processing time 25min / medium viscous 400 g 800 g 1600 g 4 kg 12,8 kg 48 kg 11,90 10,00 29,75 25,00 15,35 12,90 19,19 16,13 27,55 23,15 17,22 14,47 58,35 49,03 14,59 12,26 138,80 116,64 10,84 9,11 443,17 372,41 9,23 7,76 Fillers / Additives Cleanser / Thinner Mould Release Agent Colours / Coatings Mould and Casting Aquarium and Terrarium Systems Compared: Field of Application: Underground Article Humid Terrariums Aquariums, paludariums low viscous for hard surfaces (OSB, stone, ) medium viscous for soft or non-porous surfaces (Styrofoam, ) Desert Terrariums high UV-resistance low viscous for hard surfaces (OSB, stone, ) medium viscous for soft or non-porous surfaces (Styrofoam, ) HP-E45T HP-E45TM HP-E25TU HP-E25TMU Article: HP-E25TU Processing time 25min / low viscous 400 g 800 g 1600 g 12,49 10,50 31,23 26,25 18,29 15,37 22,86 19,21 29,99 25,20 18,74 15,75 Article: HP-E25TMU Processing time 25min / medium viscous 400 g 800 g 1600 g 12,49 10,50 31,23 26,25 18,29 15,37 22,86 19,21 29,99 25,20 18,74 15,75 Tools / Accessories Others Also suitable for saltwater aquariums the use of UV lamps E = Epoxy Resin Systems; T = Terrarium system; M = medium viscous; U = at higher UV load 4 kg 12,8 kg 48 kg 69,79 58,65 17,45 14,66 159,80 134,29 12,48 10,49 536,61 450,93 11,18 9,39 4 kg 12,8 kg 48 kg 69,79 58,65 17,45 14,66 159,80 134,29 12,48 10,49 536,61 450,93 11,18 9,39 for barrel upon request phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 125

64 Vacuum Technology Sandwich Material Reinforcement Fabrics Epoxy Filler The epoxy filler HP-E30S is a filled two component combination of resin and hardener with fine extenders. This filler has very good adhesion to wood, steel, polyester and other surfaces. HP-E30S is solvent-free and therefore low unpleasant odour. Further more is this epoxy filler suitable for permanent immersion in (sea) water. Article: HP-E30S Processing time 30min / pasty 1 kg 5 kg 22,49 18,90 22,49 18,90 94,90 79,75 18,98 15,95 Features and Benefits: Very good adhesion to wood, steel, polyester and other surfaces provided with suitable primers Water vapour impermeable Resistant to various chemicals Among others, usable for osmosis treatment Easy to sand Semi-flexible permanent immersion in (sea) water Dust dry after approx 120min Product Properties: Resin Hardener Method HP-E30S Colouring Light green - mat Mixing ratio weight Mold System and Casting Resins Page Products HP-SI6GB Silicone Mold System HP-SI30GB Silicone Mold System HP-SI41GB Silicone Mold System HP-R15GB-flex Polyurethane Casting Resin HP-R4GB Polyurethane Casting Resin Mixing ratio Pot life Hardness Shore ( minutes at 20 C) 130 HP-R12GB 100/ D Polyurethane Casting Resin HP-A15GB Acryl Casting Resin 100/100 6 A / A /3 40 A / A / D / D 84 Particularities - high dimensional accuracy - high dimensional accuracy - Particularly suitable for mineral casting resins - tin free - High flexibility - Electric casting compound - insulation resistance > 20 GΩ (at 2500V/3mm) - Ideal for objects > 100g - solvent-free water basis - odorless Cleanser / Thinner Mould Release Agent Colours / Coatings Epoxy Resins Mixing ratio volume Mixed viscosity pasty Pot life (100g at 20 C) minutes 30 Dust dry after (at 20 C) hours 2 Recoating interval (at 20 C) hours 48 Processing temperature (minimal) C 15 Density g/cm³ approx. 1,5 (mixed) Fillers / Additives Solid Content % approx. 100 Mould and Casting Flash Point (DIN C > 100 Tools / Accessories phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 127

65 Sandwich Material Reinforcement Fabrics Silicone Mold System The silicone systems HP-SI6GB, HP-SI30GB and HP-SI41GB are medium-viscosity 2-component combinations of silicone rubber with low processing time. Features and Benefits: Medium viscous molding compound High tear strength Bubble-free grouting Creation of flexible molds Duplicate in model building Product Properties: HP-SI6GB HP-SI30GB HP-SI41GB addition crosslinking condensation crosslinking Colouring light green red white Mixing ratio weight 100/ / /3 Mixed viscosity medium viscous Polyurethane flexibal Casting Resin The PUR system HP-R15GB-flex is an unfilled, medium-viscosity 2-component combination of resin and hardener with high flexibility. Features and Benefits: Excellent flow characteristics High flexibility Paintable with colouring pastes Creation of detailed models with low wall thicknesses Product Properties: Colouring Mixing ratio Mixed viscosity weight HP-R15GB-flex beige 100/30 medium viscous Mould Release Agent Colours / Coatings Epoxy Resins Vacuum Technology Pot life (at 20 C) minutes Demouldable after (at 20 C) hours (h) Hardness Shore A hours (h) Shrinkage % Particularities: Article: HP-SI6GB Processing time 6min Application with high dimensional accuracy Article: HP-SI30GB Processing time 30min <0,2 <0,2 <1 Particularly suitable for mineral casting resins PU fast casting resins Limited suitable for epoxy casting resins tin free Article: HP-SI41GB Processing time 40min Article: HP-R15GB Processing time min 0,65 kg 1,3 kg 2,6 kg Pot life (at 20 C) minutes Demouldable after (at 20 C) minutes Full cure (at 20 C) hours (h) Hardness Shore A 16,90 14,20 26,00 21,85 26,90 22,61 20,69 17,39 47,90 40,25 18,42 15, Fillers / Additives Cleanser / Thinner Mould and Casting 500 g 1 kg 2 kg 18,35 15,42 36,70 30,84 29,35 24,66 29,35 24,66 53,90 45,29 26,95 22, g 1 kg 2 kg 18,35 15,42 36,70 30,84 29,35 24,66 29,35 24,66 53,90 45,29 26,95 22,65 1,03 kg 2,06 kg 5,15 kg 24,90 20,92 24,17 20,31 43,90 36,89 21,31 17,91 97,50 81,93 18,93 15,91 6,5 kg 13 kg 109,90 92,35 16,91 14,21 189,90 159,58 14,61 12,28 Tools / Accessories 5 kg 126,90 106,64 5 kg 126,90 106,64 10,3 kg 183,90 154,54 10 kg 20 kg 40 kg 25,38 21,33 239,00 200,84 23,90 20,08 455,30 382,61 22,77 19,13 850,85 715,00 21,27 17,88 10 kg 20 kg 40 kg 25,38 21,33 239,00 200,84 23,90 20,08 455,30 382,61 22,77 19,13 850,85 715,00 21,27 17,88 20,6 kg 17,85 15,00 324,90 273,03 15,77 13, phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 129

66 Reinforcement Fabrics Sandwich Material Vacuum Technology Polyurethane Fast Casting Resin The PUR systems HP-R4GB and HP-R12GB are unfilled, low-viscosity 2-component combinations of resin and hardener with rapid through-hardening. Features and Benefits: Excellent flow characteristics Fast curing, short demoulding time Easy to edit High filling capacity Creation of detailed models with low wall thicknesses Can be dyed with color pastes - Addition max. 3% Product Properties: HP-R4GB HP-R12GB Colouring beige Mixing ratio weight 100/100 Mixed viscosity low viscous Pot life (at 20 C) minutes Demouldable after (at 20 C) minutes > 30 (100g, layer thickness 30mm) > 180 Mechanically resistant (at 20 C) hours (h) 3 24 Electrically resistant (at 20 C) hours (h) 1 Hardness Shore D Particularities: Ideal for objects < 100g Ideal for objects > 100g Acryl Casting Resin The acrylic system HP-A15GB is a medium-viscosity 2-component combination of acrylic resin and mineral powder on a solvent-free water basis. Features and Benefits: Low heat generation Easy to process, odorless Addition of up to 5% water is possible Can be mixed with dry color pigments Thickening with cotton flakes is possible Product Properties: Creation of decorative and technical elements Production of sculptures and reliefs Creation of detailed models Duplication of objects HP-A15GB Colouring beige Mixing ratio weight 100 parts Acrylic / 300 parts mineral powder Mixed viscosity medium viscous Pot life (at 20 C) minutes Demouldable after (at 20 C) minutes Mechanically resistant (at 20 C) hours (h) 8 Full cure (at 20 C) hours (h) 24 Hardness Shore D 84 Colours / Coatings Mould Release Agent Cleanser / Thinner Epoxy Resins Mould and Casting Article: HP-R4GB Processing time 3-4min 500 g 1 kg 2 kg 5 kg 13,90 11,68 27,80 23,36 19,90 16,72 19,90 16,72 32,90 27,65 16,45 13,82 74,30 62,44 14,86 12,49 Electric casting compound Article: HP-R12GB Processing time 9-10min 500 g 1 kg 2 kg 5 kg 13,90 11,68 27,80 23,36 19,90 16,72 19,90 16,72 32,90 27,65 16,45 13,82 74,30 62,44 14,86 12,49 Article: HP-A15GB Processing time min 2 kg 4 kg 20 kg 100 kg 17,99 15,12 9,00 7,56 29,99 25,20 7,50 6,30 119,29 100,24 5,96 5,01 525,00 441,18 5,25 4,41 Fillers / Additives Tools / Accessories 10 kg 20 kg 132,50 111,34 13,24 11,13 249,90 210,00 12,50 10,50 10 kg 20 kg 132,50 111,34 13,24 11,13 249,90 210,00 12,50 10, phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 131

67 Reinforcement Fabrics Sandwich Material Overview POlYESTER RESIN SYSTEMS Polyester resins are prized for their durability and weather resistance, making them useful for many outdoor and indoor applications. Polyester resins are the most widely used resins. They are very used in many different and diversified applications such as marine industry, pond / pool coatings processes and so on. Table guidance for choosing the right Polyester Resin System. Properties: Excellent value compared to other matrix resins Good chemical resistance LSE (low Styrene Emission) Polyester Resin Simple dosage setting The viscosity can be adjusted with the addition of Thixotropic Powder (HP-PK22) Colours / Coatings Mould Release Agent Vacuum Technology page 134 Products HP-P21L laminating resin (wax free) LAMINATING ADHERE COVERING CASTING FEATURES SURFACE POT LIFE TEMPERATURES fibre wet-out sticking together in female moulds (gelcoat) on top (topcoat) embedding ++ O - - ORTHO, LSE, slightly thixotropic, laminating resin for frp ponds tacky-free surface? no Improved chemical resistance? no min. at 20 C processing minimum (recommended) C loadability (HDT / C) Cleanser / Thinner Epoxy Resins HP-P21LP laminating resin (wax containing) HP-P21LPG laminating resin (wax containing) HP-P21LS laminating resin (wax free) HP-P21LSP laminating resin (wax containing) O ORTHO, LSE, slightly thixotropic ORTHO, LSE, approval from Lloyd s Register, slightly thixotropic ISO/NPG, LSE, slightly thixotropic, laminating resin for frp ponds / pools ISO/NPG, LSE, slightly thixotropic yes yes no yes no no yes yes > > 90 Fillers / Additives Mould and Casting HP-P21TC * topcoat (wax containing) HP-P21GC * gelcoat (wax free) = very good applicable + = applicable o = conditionally applicable - = not provided thixotropic, colourless or coloured, high quality topcoat,suitable for frp ponds pools thixotropic, colourless or coloured yes * Gel - and Topcoats are available in different colours. no yes yes > > 80 Tools / Accessories Law change in the Chemicals Prohibition Ordinance (ChemVerbotsV)!!! The shipping of polyester resins is only possible if the following basics are met: - Professional use - Public research, study or educational institutions - Resellers In addition, polyester resin systems can only be picked up by persons over 18 years with appropriate instruction. 132 phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 133

68 Epoxy Resins Vacuum Technology Sandwich Material Reinforcement Fabrics Laminate Polyester Resin - Wax Free / Tacky Curing The LSE Polyester Laminating System HP-P21L is an unfilled, low-viscous combination of resin and hardener with short processing time (pot life). Article: HP-P21L Orthopthalic-based Processing time 15-20min / low viscous 1kg resin/ 20g hardener 5kg resin/ 100g hardener 10kg resin/ 200g hardener 30kg resin/ 600g hardener *50kg resin/ 1kg hardener *220kg resin/ 5kg hardener * Shipping in steel bucket or steel drum 9,90 8,32 9,71 8,16 32,90 27,65 6,45 5,42 56,90 47,82 5,58 4,69 142,75 119,96 4,67 3,92 209,00 175,63 4,10 3,44 849,00 713,45 3,77 3,17 Features and Benefits: Unsaturated Polyester Resin Orthophtalic-based, pre-accelerated, high thixotropic index Wax free, tacky for further bonds / layers Good mechanical properties Excellent wet-out of fibre glass, carbon and aramid fibres Applicable for hand lay-up, spray and for general reinforced plastics Laminating tanks, containers, floating equipments, pools, ponds, modelmaking, car industry... LSE ( Low Styrene Emission) polyester resin Contains peroxide-idicator Product Properties: Resin Hardener Method HP-P21L Mixing ratio weight Mixing ratio volume Mixed viscosity (at 20 C) low viscous Pot life (at 20 C) minutes Demouldable after hours 24 Full cure days 2 Processing temperature C Laminate Polyester Resin - Waxed for Finish Uses The LSE Polyester Laminating System HP-P21LP is an unfilled, low-viscous combination of resin and hardener with short processing time (pot life). Article: HP-P21LP Orthopthalic-based Processing time 15-20min / low viscous 1kg resin/ 20g hardener 5kg resin/ 100g hardener 10kg resin/ 200g hardener 30kg resin/ 600g hardener *50kg resin/ 1kg hardener *220kg resin/ 5kg hardener * Shipping in steel bucket or steel drum 9,90 8,32 9,71 8,16 32,90 27,65 6,45 5,42 56,90 47,82 5,58 4,69 142,75 119,96 4,67 3,92 209,00 175,63 4,10 3,44 849,00 713,45 3,77 3,17 Features and Benefits: Unsaturated Polyester Resin Orthophtalic-based, pre-accelerated, high thixotropic index Waxed for top or finish uses (prevent coats of resin from remaining sticky) Good mechanical properties Excellent wet-out of fibre glass, carbon and aramid fibres Applicable for hand lay-up, spray and for general reinforced plastics Laminating tanks, containers, floating equipment, pools, ponds, modelmaking, car industry... LSE (Low Styrene Emission) polyester resin Contains peroxide-indicator Product Properties: Resin Hardener Method HP-P21LP Mixing ratio weight Mixing ratio volume Mixed viscosity (at 20 C) low viscous Pot life (at 20 C) minutes Demouldable after hours 24 Full cure days 2 Processing temperature C Fillers / Additives Cleanser / Thinner Mould Release Agent Colours / Coatings Following layers without grinding within days 7 Following layers without grinding within days 1 Mould and Casting * Project zoo - therapy center Münzesheim (Kraichtal hospital) Physical Data: Viscosity mpa s Data of Unreinforced Resin: Tensile strength MPa Elongation at break % DIN (cured condition) 62 ISO 527 1,7 ISO 527 Physical Data: Viscosity mpa s Data of Unreinforced Resin: Tensile strength MPa Elongation at break % DIN (cured condition) 62 ISO 527 1,7 ISO 527 Tools / Accessories Flexural strength MPa 110 ISO 178 Flexural strength MPa 110 ISO 178 Impact resistance kj/m² 7,4 ISO 179 E-Modulus MPa 4100 ISO 527 Hardness Barcol B 45 ASTM D2583 Heat distortion temperature C 60 ISO R 75 Specifications after curing 48h at 20 C (68 F) and 2% MEKP Impact resistance kj/m² 7,4 ISO 179 E-Modulus MPa 4100 ISO 527 Hardness Barcol B 45 ASTM D2583 Heat distortion temperature C 60 ISO R 75 Specifications after curing 48h at 20 C (68 F) and 2% MEKP phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 135

69 Epoxy Resins Vacuum Technology Sandwich Material Reinforcement Fabrics Laminate Polyester Resin - Approval to Lloyd s Register of Shipping The LSE Polyester Laminating System HP-P21LPG is an unfilled, low-viscous combination of resin and hardener. Article: HP-P21LPG Orthopthalic-based Processing time 15-20min / low viscous 1kg resin/ 20g hardener 5kg resin/ 100g hardener 10kg resin/ 200g hardener 30kg resin/ 600g hardener *50kg resin/ 1kg hardener *220kg resin/ 5kg hardener * Shipping in steel bucket or steel drum 10,90 9,16 10,69 8,98 34,90 29,33 6,84 5,75 59,50 50,00 5,83 4,90 149,00 125,21 4,87 4,09 219,50 184,45 4,30 3,62 899,00 755,46 4,00 3,36 Features and Benefits: Unsaturated Polyester Resin Orthophtalic-based, pre-accelerated, high thixotropic index Waxed for top or finish uses (prevent coats of resin from remaining sticky) Good mechanical properties Excellent wet-out of fibre glass, carbon and aramid fibres Applicable for hand lay-up, spray and for general reinforced plastics Laminating tanks, containers, floating equipment, pools, ponds, modelmaking, car industry... LSE (Low Styrene Emission) Polyester Resin Approval to Lloyd s register of shipping Product Properties: Resin Hardener Method HP-P21L Mixing ratio weight Mixing ratio volume Mixed viscosity (at 20 C) low viscous Pot life (at 20 C) minutes Demouldable after hours 24 Full cure days 2 Processing temperature C Laminate Polyester Resin - Wax-Free ISO/NPG Basis The LSE Polyester Laminating System HP-P21LS is an unfilled, low-viscous combination of resin and hardener. Article: HP-P21LS ISO-NPG-based Processing time 15-20min / low viscous 1kg resin/ 20g hardener 5kg resin/ 100g hardener 10kg resin/ 200g hardener 30kg resin/ 600g hardener *50kg resin/ 1kg hardener *220kg resin/ 5kg hardener * Shipping in steel bucket or steel drum 11,50 9,66 11,27 9,47 36,90 31,01 7,24 6,08 69,90 58,74 6,85 5,76 179,50 150,84 5,87 4,93 275,00 231,09 5,39 4, ,00 945,38 5,00 4,20 Features and Benefits: Unsaturated high quality Polyester Resin, based in ISO/NPG Pre-accelerated, high thixotropic index Wax free, tacky for further bonds / layers Good mechanical properties Excellent wet-out of fibre glass, carbon and aramid fibres Applicable for hand lay-up, spray and for general reinforced plastics Laminating tanks, containers, floating equipment, pools, ponds, modelmaking, car industry... LSE (Low Styrene Emission) polyester resin High water / chemical resistance and better heat stability Product Properties: Resin Hardener Method HP-P21LS Mixing ratio weight Mixing ratio volume Mixed viscosity (at 20 C) low viscous Pot life (at 20 C) minutes Demouldable after hours 24 Full cure days 2 Processing temperature C Fillers / Additives Cleanser / Thinner Mould Release Agent Colours / Coatings Following layers without grinding within days 1 Following layers without grinding within days 7 Mould and Casting Physical Data: Viscosity Data of Unreinforced Resin: mpa s Peak temperature (1% MEKP, from 25 C) C Tensile strength MPa DIN (cured condition) ISO 527 Physical Data: Viscosity Data of Unreinforced Resin: mpa s Tensile strength MPa Elongation at break % DIN (cured condition) 80 ISO 527 3,5 ISO 527 Tools / Accessories Elongation at break % 2 ISO 527 Flexural strength MPa 110 ISO 178 Flexural strength MPa Impact resistance kj/m² E-Modulus MPa Hardness Barcol B Heat distortion temperature C 110 ISO ISO ISO ASTM D ISO R 75 Specifications after curing 48h at 20 C (68 F) and 2% MEKP Impact resistance kj/m² E-Modulus MPa Hardness Barcol B Heat distortion temperature C Specifications after curing 48h at 20 C (68 F) and 2% MEKP 10 ISO ISO ASTM D2583 > 90 ISO R phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 137

70 Epoxy Resins Vacuum Technology Sandwich Material Reinforcement Fabrics Laminate Polyester Resin - Waxed for Top or Finish Uses / ISO/NPG Basis The LSE Polyester Laminating System HP-P21LSP is an unfilled, low-viscous combination of resin and hardener. Article: HP-P21LSP ISO-NPG-based Processing time 15-20min / low viscous 1kg resin/ 20g hardener 5kg resin/ 100g hardener 10kg resin/ 200g hardener 30kg resin/ 600g hardener *50kg resin/ 1kg hardener *220kg resin/ 5kg hardener * Shipping in steel bucket or steel drum 11,50 9,66 11,27 9,47 36,90 31,01 7,24 6,08 69,90 58,74 6,85 5,76 179,50 150,84 5,87 4,93 275,00 231,09 5,39 4, ,00 945,38 5,00 4,20 Features and Benefits: Unsaturated high quality polyester resin, based in ISO/NPG Pre-accelerated, high thixotropic index Waxed for top or finish uses Good mechanical properties Excellent wet-out of fibre glass, carbon and aramid fibres Applicable for hand lay-up, spray and for general reinforced plastics Laminating tanks, containers, floating equipment, pools, ponds, modelmaking, car industry... LSE (Low Styrene Emission) polyester resin High water / chemical resistance and better heat stability Product Properties: Resin Hardener Method HP-P21LSP Mixing ratio weight Mixing ratio volume Mixed viscosity (at 20 C) low viscous Pot life (at 20 C) minutes Demouldable after hours 24 Full cure days 2 Processing temperature C Gelcoat - ISO/NPG Basis The Polyester-System HP-P21GC is a pre-accelerated, semi-flexible ISO/NPG gelcoat. It s particularly suitable for coatings in swimming pools and pond constructions, in boat building, vehicle manufacturing and tuning parts, as well as in modeling. Features and Benefits: High-quality, unsaturated polyester gelcoat ISO/NPG Thixotropic, tacky curing (wax free) Cobalt pre-accelerated Slightly higher elasticity (semi-flexible and therefore less damage on the laminate) High UV stability, excellent weather resistance For use in swimming pools / pond constructions and in boat building Viscosity set for manual application Product Properties: Resin Hardener HP-P21GC Mixing ratio weight Mixing ratio volume Mixed viscosity (at 20 C) thixotropic High viscosity for manual application Pot life (at 20 C) minutes Demouldable hours 24 Cured hours 48 Processing temperature (optimal) C 20 Processing temperature (min/max) C Recoat within hours 24 Fully cured after days 7 Fillers / Additives Cleanser / Thinner Mould Release Agent Colours / Coatings Following layers without grinding within days 1 Mould and Casting Physical Data: Viscosity mpa s Data of Unreinforced Resin: Tensile strength MPa Elongation at break % DIN (cured condition) 80 ISO 527 3,5 ISO 527 Available Standard Colours: Article: HP-P21GC RAL 0000 Transparent 1kg resin/ 20g hardener ISO-NPG-based 13,49 11,34 13,23 11,12 Article: HP-P21GC RAL 9010 Pure White 1kg resin/ 20g hardener ISO-NPG-based 13,49 11,34 13,23 11,12 Tools / Accessories Flexural strength MPa 110 ISO 178 Impact resistance kj/m² 10 ISO 179 E-Modulus MPa 3500 ISO 527 Hardness Barcol B 45 ASTM D2583 Heat distortion temperature C > 90 ISO R 75 Specifications after curing 48h at 20 C (68 F) and 2% MEKP 2,5kg resin/ 100g hardener 5kg resin/ 100g hardener 18,4kg resin/ 400g hardener 30,90 25,97 11,89 9,99 58,90 49,50 11,55 9,71 164,99 138,65 8,97 7,54 2,5kg resin/ 100g hardener 5kg resin/ 100g hardener 20,42kg resin/ 400g hardener 30,90 25,97 11,89 9,99 58,90 49,50 11,55 9,71 189,98 159,65 9,30 7, phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 139

71 Reinforcement Fabrics Sandwich Material Topcoat - ISO/NPG Basis The LSE Polyester Laminating System HP-P21LSP is an unfilled, low-viscous combination of resin and hardener. Features and Benefits: High-quality, unsaturated polyester resin based on ISO/NPG Thixotropic, tacky- free curing (waxed) Cobalt pre-accelerated Slightly higher elasticity (semi-flexible and therefore less damage on the laminate) High UV stability, excellent weather resistance Salient Heat resistance > 80 C Article: HP-P21TC RAL kg resin/ 20g hardener 2,5kg resin/ 100g hardener 5kg resin/ 100g hardener 19,63kg resin/ 400g hardener ISO-NPG-based Chromoxydgreen 13,49 11,34 13,23 11,12 30,90 25,97 11,89 9,99 58,90 49,50 11,55 9,71 199,80 167,90 9,98 8,38 Article: HP-P21TC RAL 9010 Pure White Article: HP-P21TC RAL 9005 Deep Black 1kg resin/ 20g hardener 2,5kg resin/ 100g hardener 5kg resin/ 100g hardener 20,35kg resin/ 400g hardener ISO-NPG-based ISO-NPG-based 13,49 11,34 13,23 11,12 30,90 25,97 11,89 9,99 58,90 49,50 11,55 9,71 212,95 178,95 10,26 8,62 Colours / Coatings Mould Release Agent Vacuum Technology Product Properties: Resin Hardener HP-P21TC Mixing ratio weight Mixing ratio volume Mixed viscosity (at 20 C) Thixotropic High viscosity for manual application Pot life (at 20 C) minutes kg resin/ 20g hardener 2,5kg resin/ 100g hardener 5kg resin/ 100g hardener 13,49 11,34 13,23 11,12 30,90 25,97 11,89 9,99 58,90 49,50 11,55 9,71 Cleanser / Thinner Epoxy Resins Demouldable hours Cured hours Processing temperature (optimal) C Processing temperature (min/max) C Recoat within hours Fully cured after days ,37kg resin/ 400g hardener MEKP-Hardener für 189,98 159,65 9,15 7,69 Fillers / Additives Mould and Casting Article: HP-P21TC RAL 0000 Transparent 1kg resin/ 20g hardener 2,5kg resin/ 100g hardener ISO-NPG-based 13,49 11,34 13,23 11,12 30,90 25,97 11,89 9,99 Article: HP-P21TC RAL 5012 Light Blue 1kg resin/ 20g hardener 2,5kg resin/ 100g hardener ISO-NPG-based 13,49 11,34 13,23 11,12 30,90 25,97 11,89 9,99 Article: MEKP Dosage: 2% 100g hardener 200g hardener 600g hardener 4,70 3,95 47,00 39,50 5,90 4,96 29,50 24,79 9,89 8,31 16,48 13,85 Features and Benefits: Can be used for the pre-accelerated of the series HP-P21 Other resins may require preliminary Made for Laminating Resins Gel / Topcoats with accelerator : hand lay up, spray up, spinning, infusion and filament winding Product Properties: MEKP Tools / Accessories 5kg resin/ 100g hardener 18,35kg resin/ 400g hardener 58,90 49,50 11,55 9,71 169,99 142,85 9,07 7,62 5kg resin/ 100g hardener 19,15kg resin/ 400g hardener 58,90 49,50 11,55 9,71 189,98 159,65 9,72 8,17 1kg hardener 5kg hardener 15,90 13,36 15,90 13,36 45,10 37,90 9,02 7,58 This product must be sent by carrier agencie because it is a hazardous good. Please contact us for more information about transport costs for this item. Chemical nature Colour Mixing ratio Processing temperature C Dosage % methyl ethyl ketone peroxide transparent As recommended by the respective system phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 141

72 Reinforcement Fabrics In-Mould Coating The In-Mould Coating (IMC) is a special developed 2K polyurethane varnish for coating fibre- reinforced plastic components in negative moulds and it is preferably used for coating epoxy laminates. Whether for highly transparent visible carbon parts, complex vehicle components or special colours in flight model construction - our IMC-Varnish enables the complete manufacturing of the fibre-composite component in the mould. At the end of the process, you ll have a ready painted component. Features and Benefits: High quality coatings for In-Mould coating (first layer in female moulds) Userfriendly processing due to the possibility to laminate it again Available in different colours (RAL) or Neon Colours Good uv-stability, wax free Forms chemical compounds with all epoxy-resins (laminating, covering and infusion) from HP-Textiles For spraying, manual application with a paint-brush is also possible Colours / Coatings Sandwich Material Our In-Mould Coatings are available in the colour systems of RAL or adjusted to your own colour sample. Highly transparent versions for design fabrics are also available. Principle: The painting of the moulded part takes place in the mould or in the negative mould. Instead of grinding and painting the component after de-moulding, the painting takes place already in the mould on the later visible side of the component. IN-Mould Coating Consumtion per Layer g/m² (wet) results to approx g/m² (dry) Recommended number of coats 2-3 (depends on the coverage of the colour) 1 liter mixture is enough for 4-5 m² surface in 3 layers with each 75g/m² (wet) Processing time: 30min Mould Release Agent Vacuum Technology Due to the specially developed formula, the applied PU-Varnish can be laminated even after weeks without problems and therefore, even a larger batch production is possible. Especially productions with the Vacuum-Infusion Method or the Vacuum-Press Method can benefit from this principle. The In-Mould Coating is applied with a spray gun or with a soft brush. Our Epoxy High Load Resin System HP-E29L, HP-E56L or HP-E111L as well as the Injection Resin System HP-E3000GL and HP-E300RI ensure an especially high adhesion between the layers. Standard Colours: Light Colours: Special Colours: 750ml resin 1500ml resin 7500ml resin 23,90 20,08 31,87 26,78 43,90 36,89 29,27 24,60 169,50 142,44 750ml resin 1500ml resin 7500ml resin 28,95 24,33 38,60 32,44 51,96 43,66 34,64 29,11 189,95 159, ml resin 7500ml resin 48,31 40,60 32,21 27,07 177,31 149,00 23,64 19,87 Cleanser / Thinner 22,60 18,99 25,33 21,28 Mould and Casting Epoxy Resins Advantages: 1. Significant cost reduction due to the immense time savings of up to 80% as well as the reduction of additional work steps. Furthermore, compared to conventional gel coats the low layer coating of the IMC reduces not only costs but also the total weight of the component. 2. High adhesion between the layers due to the special formula of the system. It enables a subsequent further processing after applying the In-Mould Coating even after weeks. In combination with our Epoxy High Load Resin Systems it forms a real chemical bond. 3. Optimised surface quality available in many RAL colours or in transparent for visible carbon parts. High UV- and light stability as well as a good resistance to weathering. In combination with the MTI -Hose (membrane-wrapped suction line) the respective advantages are combined and therefore unite the cost reduction with a high level of process stability! Article HP-IMC-0000 HP-IMC-1021 HP-IMC-2004 HP-IMC-3000 HP-IMC-5002 HP-IMC-9003 HP-IMC-9004 Colour RAL 0000 transparent (carbon design parts) RAL 1021 rape yellow RAL 2004 pure orange RAL 3000 flame red RAL 5002 ultramarine blue RAL 9003 signal white RAL 9004 signal black Special hints regarding luminous colours: Article HP-IMC-1026* HP-IMC-2005* HP-IMC-3024* Colour RAL 1026 luminous yellow RAL 2005 luminous orange RAL 3024 luminous red * Articles are similar to the RAL-Code Delivery in approx: 4-5 working days Would you like to order a special colour? From 1500g almost all colours are available according to RAL chart. Delivery in approx: 4-5 working days Viscosity of luminous varnish is higher than standard HP-IMC. If required, use thinner HP-IMC-X. Luminous colours generally have just medium UV- and light stabilities. Brilliance of colours can reduce over time. A Layer of IMC clear or multiple layers of coating will lower this effect. For high brightness, it is possible to apply a layer of white IMC at the end Tools / Accessories Fillers / Additives Convince yourself and have a look at our products!! Follow this QR-Code to a detailed instruction of the IMC/MTI -Method! Easy demoulding with our release agent HP-HGR5! you can find HP-HGR5 on page phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 143

73 Epoxy Resins Vacuum Technology Sandwich Material Reinforcement Fabrics HP-PUR / PUR-Top-Coat Two-component polyurethane varnish for high quality and weather proof coatings with intense gloss. Features and Benefits: Professional two-component polyurethane coating finish for industrial paintings Top coat for external weathering without a constant contact to water coating of machines, ship parts, furniture, containers and especially for FRP surfaces Ready to be sprayed, manual application with soft paint-brush or flocked roller is also possible Important advice: Unsuitable for applications under water! No adhesion on PE, PP, PTFE,... Spray Viscosity (flow cup DIN 4): sec. (4mm DIN at 20 C) Drying times at 20 C Dust-free minutes Non-sticky 4-5 hours Complete drying process 48 hours HP-PUR Processing time: approx. 3 hours the suitable diluent can be found on page 149 Special hints regarding luminous colours: Viscosity of luminous varnish is higher than the standard colours. If required, use thinner HP-IMC-X. Luminous colours generally have just medium UV- and light stabilities. Brilliance of colours can reduce over time. A Layer of IMC clear or multiple layers of coating will lower this effect. For high brightness, it is possible to apply a layer of white IMC at the end Standard Colours: Light Colours: Special Colours: Colour Pastes The opaque color pastes of the HP-FP series are made of high-quality pigments, castor oil and selected surfactants. The color pastes are free from solvents and volatile organic compounds. Features and Benefits: coloring solvent-free epoxy and polyurethane systems Due to high pigment concentration very efficient in consumption Contains surfactants and dispersants, therefore compatible with many basic materials Based on exclusively colourfast pigments Great color fidelity and reproducibility Available in many RAL colours or on customer request Article: HP-FP Colour Pastes, covering Category A 350g 13,90 11,68 39,71 33,37 B 350g 14,95 12,56 42,71 35,88 C 350g 15,99 13,44 45,68 38,40 D 350g 16,99 14,28 48,54 40,80 E 350g 19,20 16,13 54,85 46,08 F 350g 20,99 17,64 59,97 50,40 Mixing ratio (prescription): Coatings: 10-15% (weight parts) Cover layer systems: 5-10% (weight parts) Casting & Laminating Systems: 1-5% (parts by weight) To increase the color stability, we recommend using an additional transparent topcoat HP-E30TDS-0000 incl. Approx. 3% UV stabilizer HP-BEL91. These products can be ordered optionally. RAL1000 A RAL1023 E RAL3001 E RAL3031 E RAL5009 B RAL6004 A RAL6024 B RAL7010 A RAL7038 A RAL8015 A RAL1001 A RAL1024 A RAL3002 E RAL4001 F RAL5010 A RAL6005 D RAL6025 B RAL7011 A RAL7039 A RAL8016 A Fillers / Additives Cleanser / Thinner Mould Release Agent Colours / Coatings Mould and Casting 625ml resin 1250ml resin 6250ml resin Article 22,49 18,90 35,99 30,24 38,90 32,69 31,12 26,15 149,90 125,97 23,98 20,16 Colour 625ml resin 1250ml resin 6250ml resin Article Colour 26,49 22,26 42,38 35,62 42,90 36,05 34,32 28,84 161,95 136,09 25,91 21, ml resin 6250ml resin Would you like to order a 42,90 36,05 34,32 28,84 154,90 130,17 24,78 20,83 RAL1002 A RAL1027 E RAL3003 F RAL4002 E RAL5011 B RAL6006 B RAL6026 B RAL7012 A RAL7040 A RAL8017 A RAL1003 E RAL1028 F RAL3004 F RAL4003 E RAL5012 A RAL6007 B RAL6027 A RAL7013 A RAL7042 A RAL8019 A RAL1004 E RAL1032 D RAL3005 F RAL4004 F RAL5013 C RAL6008 A RAL6028 E RAL7015 A RAL7043 A RAL8022 F RAL1005 E RAL1033 E RAL3007 F RAL4005 B RAL5014 C RAL6009 E RAL6029 C RAL7016 A RAL7044 A RAL8023 E RAL1006 E RAL1034 C RAL3009 A RAL4006 F RAL5015 A RAL6010 E RAL6032 C RAL7021 A RAL7045 A RAL8024 E RAL1007 E RAL1037 E RAL3011 F RAL4007 F RAL5017 A RAL6011 A RAL6033 A RAL7022 A RAL7046 A RAL8025 A RAL1011 A RAL2000 F RAL3012 D RAL4008 F RAL5018 B RAL6012 A RAL6034 A RAL7023 A RAL7047 A RAL8028 A RAL1012 C RAL2001 F RAL3013 E RAL4009 A RAL5019 A RAL6013 A RAL6037 A RAL7024 A RAL8000 B RAL9001 A RAL1013 A RAL2002 E RAL3014 B RAL4010 E RAL5020 A RAL6014 A RAL7000 A RAL7026 A RAL8001 A RAL9002 A Tools / Accessories HP-PUR-0000 HP-PUR-1021 HP-PUR-2004 HP-PUR-3000 HP-PUR-5002 HP-PUR-9003 HP-PUR-9004 RAL 0000 transparent (carbon design parts) RAL 1021 rape yellow RAL 2004 pure orange RAL 3000 flame red RAL 5002 ultramarinblue RAL 9003 signal white RAL 9004 signal black HP-PUR-1026* HP-PUR-2005* HP-PUR-3024* RAL 1026 luminous yellow RAL 2005 luminous orange RAL 3024 luminous red * Articles are similar to the RAL-Code Delivery in approx: 4-5 working days special colour? From 1500g almost all colours are available according to RAL chart. Delivery in approx: 4-5 working days RAL1014 A RAL2003 E RAL3015 A RAL5000 C RAL5021 A RAL6015 C RAL7001 A RAL7030 A RAL8002 A RAL9003 A RAL1015 A RAL2004 F RAL3016 C RAL5001 B RAL5022 E RAL6016 B RAL7002 A RAL7031 A RAL8003 A RAL9004 A RAL1016 C RAL2008 E RAL3017 D RAL5002 C RAL5023 A RAL6017 C RAL7003 A RAL7032 A RAL8004 B RAL9005 A RAL1017 C RAL2009 F RAL3018 D RAL5003 D RAL5024 A RAL6018 E RAL7004 A RAL7033 A RAL8007 A RAL9010 A RAL1018 C RAL2010 E RAL3020 E RAL5004 F RAL6000 B RAL6019 A RAL7005 A RAL7034 A RAL8008 A RAL9011 B RAL1019 A RAL2011 E RAL3022 D RAL5005 A RAL6001 C RAL6020 A RAL7006 A RAL7035 A RAL8011 C RAL9016 A RAL1020 A RAL2012 C RAL3027 E RAL5007 A RAL6002 E RAL6021 A RAL7008 A RAL7036 A RAL8012 A RAL9017 A RAL1021 E RAL3000 F RAL3028 E RAL5008 A RAL6003 A RAL6022 D RAL7009 A RAL7037 A RAL8014 A RAL9018 A phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 145

74 Reinforcement Fabrics Overview Mould Release Agents Mould release agents are very important tools for the composite industry. They are used to facilitate the removal of cast parts from the moulds. Therefore, a post-treatment of the component is not necessary and it is possible to use the mould again. Release agents often have a significant effect on the surface of the finished product and costs can be minimized by using the right release agent. Please consult the following diagram as a support to choose the right Mould Release Agent System. All release agents are free of Silicone and PTFE! Colours / Coatings Sandwich Material Vacuum Technology Epoxy Resins site Products HP-BM17 Wax Dispersion, liquid fibre wet-out SUITABLE FOR APPLICATION WITH FEATURES POLISHABILITY CONSUMPTION DRYING TIME TEMPERATURES sticking together in female moulds (gelcoat) on top (topcoat) HP-G Priming Wax, viscous C C C C HP-PVA Release Film, liquid HP-CX7 Carnauba-Wax, pasty HP-HGR5 High-Gloss Relase Agent embedding = very good applicable + = applicable o = conditionally applicable - = not provided Applicable on smooth, non-porous surfaces. Usable as primer for PVA. Residues can be cleaned with white spirit or thinner XB. NO single release agent! Primer for PVA. Residues can be cleaned with white spirit or thinner XB. Generates very safe release film. Priming with HP-G (or HP-BM17 or HP-CX7) is necessary. Residues can be cleaned with water. Polish in several layers. High-gloss release agent. Usable as primer for PVA. Residues can be cleaned with white spirit or thinner XB. Water based 100% free of solvents! Very good release effect with PUR (IMC).Residues can be cleaned with water. g/m² minutes at 20 C...APPLICATION min. (recommended) C max. loadability C O C = in combination Rev. 3.2 Mould Release Agent Cleanser / Thinner Fillers / Additives Mould and Casting Durability at + 10 to + 30 C min. 6 months (HP-CX7 = 12 months). Liquid Release Agent: container contents must be stirred before and during processing. Bring to room temperature before use. Article: HP-BM17 Mould Release Agent 200ml 500ml 1000ml 5000ml 6,78 5,70 33,90 28,50 9,98 8,39 19,96 16,78 14,90 12,52 14,90 12,52 46,29 38,90 9,26 7,78 Thermal Stability: until 80 C Consumption: approx. 30ml/m² (depending on the surface) Characteristics and Application: HP-BM17 has to be applied sparingly with a soft cotton cloth (rotary motions). After a short drying time (approx.15 minutes) the surface can be polished with a dry and clean cotton cloth to high gloss. The mould is supposed to have an evenly gloss free from any streaks. Prior to the first mould release, new moulds are preprocessed with three or five coatings of BM 17. Every coating is supposed or be applied by using a different method, e.g.: from above to the bottom, from the left to the right, rotary. After the mould release agent has been aired for several hours (over night is the best), the material should be polished again intensively. Article: HP-G Priming Wax 200ml 500ml 1000ml 5000ml 6,78 5,70 33,90 28,50 9,98 8,39 19,96 16,78 14,90 12,52 14,90 12,52 46,29 38,90 9,26 7,78 Thermal Stability: until 100 C Consumption: approx. 30ml/m² (depending on the surface) Characteristics and Application: Silicon release agent Coating for PVA release agents in GRP moulds Do not polish, otherwise the coating wax film will be destroyed! The surface is mat after the drying period. Tools / Accessories 146 phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 147

75 Reinforcement Fabrics Sandwich Material Mould Release Agents Article: HP-PVA Film Release Agent 200ml 500ml 1000ml 5000ml 6,50 5,46 32,50 27,31 9,79 8,23 19,58 16,46 15,90 13,36 15,90 13,36 45,10 37,90 9,02 7,58 Thermal Stability: until 100 C Consumption: approx. 60ml/m² (depending on the surface) Characteristics and Application: Watery-alcoholic lotion of polyvenyalcohol Forms coatings similar to foils High selectivity can be used for non-priming surfaces Drying time 5-10min At first, you have to prime the ground with a coating of wax. After that, the PVA-Film Release Agent is applied with a film release-sponge or a soft brush. In order to achieve an even surface, the coating has to be carried out evenly and free from any streaks. By using a colouring, the evenly coating can be controlled especially well. After approx minutes the film release forms a dry and glossy film. Cleanser / Thinner Article: HP-AC Acetone 1 Ltr. Can 5 Ltr. Can 10 Ltr. Can 5,90 4,96 5,90 4,96 17,90 15,04 3,58 3,01 31,90 26,81 3,19 2,68 Boiling Point: 56 C Melting Point: -95 C Description and Application: Acetone is an uncoloured, aromatic smelling fluid. It is completely mixable with water. The substance is very volatile. Aceton is used as a solvent in colours, varnish and as a chemical intermediate. Paintbrushes, laminate roller, ventilation roller and other tools can be cleaned with aceton from non-cured polyester and. Colours / Coatings Mould Release Agent Mould and Casting Epoxy Resins Vacuum Technology Article: HP-CX7 Carnauba Wax /can 1 can of 425g 5 cans of 425g 10 cans of 425g Article: HP-HGR5 High-Gloss Relase Agent 100ml 250ml 500ml 1000ml 5000ml 16,90 14,20 39,76 33,41 14,90 12,52 35,06 29,46 13,69 11,50 32,21 27,06 4,90 4,12 49,00 41,20 10,90 9,16 43,60 36,64 18,90 15,88 37,80 31,76 31,90 26,81 31,90 26,81 139,00 116,81 27,80 23,36 Thermal Stability: until 100 C Consumption: approx g/m² (depending on the surface) Characteristics and Application: HP-CX7 Carnauba wax based Release Agent for high gloss finished surfaces. Wax release agent for brilliant high gloss finish in moulds with smooth, non porous surfaces most composites mould applications with solvent free epoxy and polyester resins Primer for Film Release Agent HP-PVA High-gloss Release Agent for working with In-Mould Coating HP-IMC (HP-Textiles) Thermal Stability: until 150 C Consumption: approx g/m² (depending on the surface) Characteristics and Application: Water based release agent for applications with In-Mould Coatings (HP-IMC) from HP-Textiles and also suitable for solvent free s, unsaturated polyester resin and vinylester resins Fast drying time (per layer <5 minutes at 20 C) Semipermanent, external release agent with good demoulding feature Application with spray gun (ready for spraying), lint-free cloth or soft brush possible Can be polished after short dry time Multiple demoulding processes are possible Article: HP-XB XB-Thinner 1 Ltr. Can 5 Ltr. Can 1 Ltr. Can 5 Ltr. Can Article: HP-IMC-X Thinner for PU 6,90 5,80 6,90 5,80 18,90 15,88 3,78 3,18 6,90 5,80 6,90 5,80 18,90 15,88 3,78 3,18 Degreasing agent for cleaning applications / passive thinning agent for EP-Systems Description and Application: The XB-Thinner can be filled in the ready mixed epoxy resin system, untill the desired consistence is achieved. Low viscosity resin systems can be made sprayable with the addition of XB-Thinner. Spraythinner for coating systems Thinner for EP-undercoat Mould cleaner Degreasing agent for cleaning applications Paint brush- and equipment cleaner HP-IMC-X is a thinner on the basis of xylene for our In-Mould-Coating and our 2K PUR Topcoats, and other polyurethane coatings. Description and Application: The thinner is used to achieve the ideal consistency in the blended PU given system. Dosage max. 5% (by weight) Tools / Accessories Fillers / Additives Cleanser / Thinner 148 phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 149

76 Reinforcement Fabrics Sandwich Material Overview Fillers Please consult the following diagram as a support to choose the right fillers. site 152 Products thicken / thixotroping FIELDS OF APPLICATION DOSAGE BULK WEIGHT FEATURES /BENEFITS anti setting backfilling coupling layer bonding, adhesion rough putty fine- / lightweight putty HP-Th23 Thixotroping Agent, minerally based C - till By weight (approx.) % approx. g/l Hygroskopic Do not apply to direct water contact. Colours / Coatings Mould Release Agent Vacuum Technology Epoxy Resins HP-PK22 Thixotroping Agent, pyrogenic silica HP-MB2 Microballoons HP-BF1 Cotton Flocks HP-GS3, HP-GS6 Chopped Glass C C C C C C 0, C ++ till C till till Hydrophobic = does not absorb water. Density: 2,2g/cm³; BET-surface: 200m²/g Dosage depends on the viscosity and temperature. Spezific weight 0,26g/cm³ max. particle size: 200µm Melting point: > 1200 C Particle size distribution (d50): 50µm length: µm thickness: µm length: 3 and 6mm thickness: µm Cleanser / Thinner Fillers / Additives Mould and Casting ++ = very good applicable + = applicable o = conditionally applicable - = not provided Example formulation for PUTTYS: HP-E45KL (resin) : 50g + (hardener) : 30g + HP-PK22 (thixo-agent) : 2g + HP-GS3/6 (chopped glass fibre) : 10g for putty alternative for fine- / light-weight-puttys HP-MB2 (microballoons) : 20g + HP-PK22 (perhaps add more) = approx g C = in combination with + or ++ Rev. 3.2 Example formulation for ADHESIVES: HP-E45KL (resin) : 50g + (hardener) : 30g + HP-PK22 (thixo-agent) : 2g + HP-BF1 (cotton flocks) : 20g + HP-PK22 (perhaps add more) = approx. 100g All fillers are versatile with epoxy, vinylester and unsaturated polyester resins. Tools / Accessories 150 phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 151

77 Reinforcement Fabrics Sandwich Material Vacuum Technology Thixotropypowder Filler for Synthetic Resin System to increase the viscosity of the sytem. Article: HP-TH23 Thixotropypowder 200g 500g 1kg 2kg 6kg Delivery in 4,30 3,61 21,50 18,05 9,30 7,82 18,60 15,64 13,95 11,72 13,95 11,72 24,90 20,92 12,45 10,46 60,90 51,18 10,15 8,53 Plastic bucket Plastic bucket Plastic bucket Plastic bucket Plastic bucket Dosage: until 15% : epoxy and polyester resin Bulk weight: g/l Characteristics and application: Filler to produce Gelcoat/Topcoat. Prevents the run down on downward surfaces. The outcome of this is an impact and a high UV-resistant upper face dosage untill 15%. Thixotropypowder HP-TH23 can be stirred intensively in the mixed synthetic resin system until the desired consistence is achieved. Microballoons Microballoons < 0,2 mm (filler for synthetic resin systems). Article: HP-MB2 Microballoons 100g 250g 500g 1kg 2kg 5kg 10kg Delivery in 3,90 3,28 39,00 32,80 6,50 5,46 26,00 21,84 9,30 7,82 18,60 15,64 14,90 12,52 14,90 12,52 25,90 21,76 12,95 10,88 49,90 41,93 9,98 8,39 89,90 75,55 8,99 7,56 Plastic bucket Plastic bucket Plastic bucket Plastic bucket Plastic bucket Plastic bucket Bag Dosage: until 30% : epoxy and polyester resin Bulk weight: g/l Specific density: 0,26 g/cm³ Particle size distribution: 50 µm Max. particle Sizing: 200 µm Melting point: > 1200 C Characteristics and application: Microballoons are white, very fine and light glass hollow balls for epoxy and polyester resin systems. By mixing them into the system, a compression proof and simple grindable filler paste be produced. Add-on till 30 % in relation of the desired consistence and strength. production of compression proof mould compounds production of light filler paste compounds Colours / Coatings Mould Release Agent Cleanser / Thinner Epoxy Resins Mould and Casting HP-PK22 is applied as a thickening and thixotropic agent in many organic systems. Article: HP-PK22 Thixotropypowder Delivery in 1 ltr 4,64 3,90 Plastic bucket 4,64 3,90 2,5 ltr 8,91 7,49 Plastic bucket 3,56 2,99 5 ltr 12,50 10,50 Plastic bucket 2,50 2,10 10 ltr 20,82 17,50 Plastic bucket 2,08 1,75 30 ltr 46,41 39,00 Plastic bucket 1,55 1,30 10 kg 148,75 125,00 Paper bag 0,595 0,50 Dosage: 0,5-5% : epoxy and polyester resin Density at 20 C: approx. 2,2g/cm³ Tamped density: approx. 40g/ltr. Characteristics and application: HP-PK22 is applied as a thickening and thixotropic agent in many organic systems, e. g. in unsaturated polyesters resins, coatings, adhesives cosmetics and others. Thixotropypowder HP-PK22 can be stirred intensively in the mixed synthetic resin system until the desired consistence is achieved. Amorphous pyrogenic silica. White colloidal powder of high purity. Cotton Flocks Filler for synthetic resin system. Article: HP-BF1 Cotton Flocks 100g 250g 500g 1kg 2kg. 6kg 20kg Delivery in 2,90 2,44 29,00 24,00 5,90 4,96 23,60 19,84 8,50 7,14 17,00 14,28 13,90 11,68 13,90 11,68 19,90 16,72 9,95 8,36 36,90 31,01 6,15 5,17 107,10 90,00 5,35 4,50 Plastic bucket Plastic bucket Plastic bucket Plastic bucket Plastic bucket Plastic bucket Bag Dosage: until 30% : epoxy and polyester resin Bulk weight: 70-90g/l length: µm thickness: 10-20µm Characteristics and application: Cotton flocks are used as a filler to thicken s or to promote adhesion between laminate layers. It offers dimensional stability and it enhances the compounds strength. It is also used for patching and repairing surfaces. They can be used in combination with chopped glass fibres. Mixtures with cotton flocks have an increased impact strength as well as improved tensile, compressive and bending strength. The molded materials are sanded and lightweight. Mould parts, design of models, sailplanes, automobil building, sandwich building, bonding and for boat building etc. Fillers / Additives Tools / Accessories phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 153

78 Mould and Casting Epoxy Resins Vacuum Technology Sandwich Material Reinforcement Fabrics Chopped Glass Chopped glass fibre 6mm (chopped E-Glass fibre with silane). Article: HP-GS3 Chopped Glass Article: HP-GS6 Chopped Glass 100g 250g 500g 1kg 2,5kg 5kg 10kg 20kg 3mm 6mm Delivery in 2,30 1,93 23,00 19,30 3,90 3,28 15,60 13,12 5,30 4,55 10,60 9,10 7,60 6,39 7,60 6,39 14,90 12,52 5,96 5,01 22,90 19,24 4,58 3,85 37,90 31,85 3,79 3,19 59,90 50,34 3,00 2,52 Minigrip bag Plastic bucket Plastic bucket Plastic bucket Plastic bucket Plastic bucket Plastic bucket Bag Dosage: until 30% : epoxy and polyester resin Bulk weight: g/l length: 6mm / 3mm Characteristics and application: Used to add in polyester and, to increase the strength of the mould parts and the mixture is still able to flow. Chopped glass fibre can be added alone or with cotton flocks. Resins that are reinforced with chopped glass fibres have a high tensile-, bending and pressure strength. masses and press masses, plastics, glue, corrosion protector coating and asbest alternative. Colour Pigments The opaque colour pigments of the HP-FD series are used for colouring layers (gel and topcoats). It will also be used for laminating and casting resins. Article: HP-FD Colour Pigments 20g Basic price/100g 100g Basic price/100g 500g Basic price/100g 1kg Basic price/100g Sufficient for Standard colours: black HP-RS ultramarine HP-UB yellow HP-EG titanium white HP-TW univ. red HP-ER moss-green HP-MG crystal blue HP-KB *terra die siena HP-TS * terra di siena can affect the curing process of polyester resins in a negative way Characteristics and application: Colour pigments for gel-, topcoats, laminating or casting resins Good light stability Good colouring unsaturated polyester resins, s, vinylester, polyurethane We recommend tests beforehand. Pigments may reduce pot-life times. To prevent settling, we recommend combination with thixotroping agent HP-PK22 (page 152). Colour Art.-No. Bulk Density titanium white pure yellow univ. pure red terra di Sienna1 moss green crystal pure ultramarine blue black 1,95 1, g 9,75 8,20 5,95 5, g 5,95 5,00 12,95 10,88 2,5-10kg 2,59 2,18 21,90 18, kg 2,19 1,84 Riddle Densitiy Chemical Specification Approximate Values referring to total quantity g/ml g/ml in laminating resins % in covering resins % HP-TW 0,8 1,0 anorganic HP-EG 1,2 1,5 anorganic HP-ER 1,5 1,9 anorganic HP-TS 0,9 1,1 anorganic HP-MG 0,9 1,1 anorganic HP-KB 1,1 1,3 anorganic HP-UB 0,5 0,7 anorganic HP-RS 0,5 0,6 organic Tools / Accessories Fillers / Additives Cleanser / Thinner Mould Release Agent Colours / Coatings 1 With unsaturated polyester resins, pigment terra di sienna may stop the reaction! That is why we advice against using in this combination phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 155

79 Sandwich Material Reinforcement Fabrics Overview Additives Liquid additives to adjust properties of resins and paints. HP-BEL11: Liquid foaming agent Volume increase of approxy 200 up to 300% with our HP-BEL11 To foam up of s and to build foam laminates or in combination with sandwich materials (such as paddles or other components). Dosage (based on total formulation) weight % HP-BEL11 HP-BEL51 HP-BEL71 HP-BEl91 Add-on resin no recomm. 2 recomm. possible possible mixture recomm. no possible recomm. recomm. Density (at 20 C) g/cm³ 0,98-1,02 1,14-1,18 0,79-0,83 0,93-0,97 0,94-0,98 Active ingredient based on active foaming agent carbonyl diamides polysiloxanes polyacrylic acids amines Opaque? EP EP, UP EP,UP,PUR EP, UP, PUR EP, UP, PUR 0, , ,2-0,8 1 0,5-1,5 1 0,2-4 1 not specified Overdosing may cause to less transparency. no opacity Mould Release Agent Colours / Coatings Mould and Casting Epoxy Resins Vacuum Technology HP-BEL31: Liquid thixotroping agent Prevents settling / sagging of resin formulations. Main usage in covering systems (paints, topcoats, ). For high thixotroping applications like pitties, we recommend HP-PK22. HP-BEL51: Degassing additive Used to add, in order to prevent the mixture from any formation and bubbling during the application. HP-BEL71: Levelling additive Improve levelling properties (such as gel- or topcoats), reduces fish-eyes. Main usage in covering systems, like topcoats. HP-BEL91: Light Stabilizer / Anti-Yellowing Additive Low-viscosity, UV-absorber for high quality surface-applications. (carbon-design, wooden coatings, casting). Usable in epoxy-systems and PUR-paints by HP-Textiles. *Please note: 1 The mentioned amounts are standard values. Additives or combination among themselves may cause to less transparency. The exact values should be determined by tests beforehand. 2 The thixotropy will generate after a medium reaction time. That is why we recommend predispensing into resin component. Article: HP-BEL11 Article: HP-BEL31 Foaming Agent Thickening Agent 20ml Basic price/100ml 100ml Basic price/100ml 500ml Basic price/100ml 1000ml Basic price/100ml 20ml Basic price/100ml 3,95 3,32 19,75 16,60 8,29 6,97 8,29 6,97 24,90 20,92 4,98 4,18 36,80 30,92 3,68 3,09 Article: HP-BEL71 Levelling Additive 20ml Basic price/100ml 100ml Basic price/100ml 500ml Basic price/100ml 1000ml Basic price/100ml 3,95 3,32 19,75 16,60 3,95 3,32 19,75 16,60 9,90 8,32 9,90 8,32 29,90 25,13 5,99 5,03 56,90 47,82 5,69 4,78 20ml Basic price/100ml Article: HP-BEL51 System Degasser 20ml Basic price/100ml 100ml Basic price/100ml 500ml Basic price/100ml 1000ml Basic price/100ml Article: HP-BEL91 Light Stabilizer 4,95 4,16 24,75 20,80 3,45 2,90 17,25 14,50 6,95 5,84 6,95 5,84 24,90 20,92 4,97 4,18 44,90 37,73 4,49 3,77 Tools / Accessories Fillers / Additives Cleanser / Thinner 100ml Basic price/100ml 500ml Basic price/100ml 1000ml Basic price/100ml 9,90 8,32 9,90 8,32 29,90 25,13 5,99 5,03 56,90 47,82 5,69 4,78 100ml Basic price/100ml 500ml Basic price/100ml 1000ml Basic price/100ml 14,95 12,56 14,95 12,56 52,90 44,45 10,58 8,89 97,50 81,93 9,75 8, phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 157

80 Epoxy Resins Vacuum Technology Sandwich Material Reinforcement Fabrics DEGASSER ROLLER Degasser rollers are used for compressing and ventin the laminates. Paddle Roller Aluminium roller with screw fastening incl. holder and plastic grip. : Article No.: roller-ø roller width HP-PR-20x75 20mm 75mm 9,50 7,98 HP-PR-25x75 25mm 75mm 10,90 9,16 HP-PR-25x150 25mm 150mm 16,90 14,20 HP-PR-30x100 30mm 100mm 19,90 16,72 Radius Roller : almost all resin systems and glass fabrics Characteristics and application: High resistance to almost all cleansers The aluminium roller can be cleaned by burning off cured resin and so the life time will be even longer Ergonomical formed plastic grip with adapter for an extension Aluminium roller with screw fastening incl. holder and plastic grip. almost all resin systems and glass fabrics Article No.: roller-ø roller width HP-RR-13x75 13mm 75mm 9,90 8,32 HP-RR-25x75 25mm 75mm 10,90 9,16 HP-RR-25x150 25mm 150mm 15,90 13,36 HP-RR-50x75 50mm 75mm 17,90 15,04 HP-RR-50x150 50mm 150mm 23,90 20,08 Characteristics and application: High resistance to almost all cleansers The aluminium roller can be cleaned burning off cured resin and so the life time will be even longer Ergonomical formed plastic grip with adapter for an extension Nobby Roller Aluminium roller with screw fastening incl. holder and plastic grip. : thick matts and fabrics Article No.: roller-ø roller width HP-NR-25x75 25mm 75mm 14,90 12,52 HP-NR-25x100 25mm 100mm 16,90 14,20 HP-NR-25x150 25mm 150mm 19,90 16,72 HP-NR-25x200 25mm 200mm 24,90 20,92 Characteristics and application: High resistance to almost all cleansers The aluminium roller can be cleaned by burning off cured resin and so the life time will be even longer Ergonomical formed plastic grip with adapter for an extension Radius Roller Aluminium roller with screw fastening incl. holder and plastic grip. : curved and round surfaces Article No.: roller-ø roller width HP-DR-13x50 13mm 50mm 11,90 10,00 HP-DR-25x75 25mm 75mm 16,90 14,20 Characteristics and application: High resistance to almost all cleansers The aluminium roller can be cleaned by burning off cured resin and so the life time will be even longer Corner Roller Aluminium roller with screw fastening incl. holder and plastic grip. : rough and edges Article No.: roller-ø roller width HP-CR-50x15 50mm 15mm 11,90 10,00 Fillers / Additives Cleanser / Thinner Mould Release Agent Colours / Coatings Mould and Casting Spiral Bristle Roller Bristle roller with screw fastening incl. holder and grip : uneven surfaces and thin glass fabrics Article No.: roller-ø roller width HP-SBR-30x50 30mm 50mm 9,90 8,32 HP-SBR-30x75 30mm 75mm 10,90 9,16 HP-SBR-30x100 30mm 100mm 14,90 12,52 HP-SBR-30x150 30mm 130mm 19,90 16,72 Characteristics and application: Ergonomical formed plastic grip with an adapter for an extension A quick change of the roller is possible with the plug fixing of the holder Difficult to clean due to its bristles Characteristics and application: High resistance to almost all cleansers The aluminium roller can be cleaned by burning off cured resin and so the life time will be even longer Ergonomical formed plastic grip with adapter for an extension Nobby Roller A clinched plasticroller for thick matts and fabrics. : coatings of greater areas like pond or swimming pool Article No.: roller-ø roller width HP-L mm 24cm 9,99 8,39 Characteristics and application: High resistance to almost all cleansers incl. holder and plastic grip with adpater for Telescopic-Extension Rod (HP-L1024) Tools / Accessories phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 159

81 Sandwich Material Reinforcement Fabrics TOOLS / ACCESSORIES Article: HP-L50 Roller Paint + Tray from 1 piece from 5 pieces from 10 pieces Consisting of: 1 Plastic Tray 50ml 1 Stick-in handle 15cm 1 Foam roller 5cm Article: HP-L pcs. Laminating Set 1,49 1,25 1,34 1,13 1,27 1,07 Article: HP-L300 Roller Paint + Tray from 1 piece from 5 pieces from 10 pieces Consisting of: 1 Plastic Tray 300ml 1 Stick-in handle 27cm 1 Foam roller 10cm Article: HP-L pcs. Brush Set with Pot 2,49 2,09 2,24 1,88 2,11 1,77 Article: HP-L1067 Velours Roller 5cm from 1 piece from 5 pieces from 10 pieces Article: HP-L1066 Velours Roller 15cm 0,62 0,52 0,56 0,47 0,53 0,44 Description: : 5cm Pole height: 4mm For extra fine finishes Article: HP-L1015 Velours Roller 10cm from 1 piece from 5 pieces from 10 pieces Article: HP-L1016 Polyamide Roller 10cm 0,98 0,82 0,88 0,74 0,83 0,70 Description: : 10cm Pole height: 4mm For extra fine finishes Mould Release Agent Colours / Coatings Mould and Casting Epoxy Resins Vacuum Technology from 1 piece from 5 pieces from 10 pieces from 1 piece from 5 pieces from 10 pieces Article: HP-L pcs. Brush Set Consisting of: 2 Foam roller 11cm 1 Universal brush 10mm 1 Stick-in handle 29cm 1 Plastic stirr stick 3 Flat brushe 25/35/50mm 1 Plastic tray 300ml 1 Round brush Gr. 2 Consisting of: 3 Flat brushs 20/25/35mm 2 Round brushes Size le paint brushes 0/1/2 2 Corner brushes 25/35mm Article: HP-L1071 Laminating Brush 2cm from 1 piece from 12 pieces from 36 pieces 5,79 4,87 5,21 4,38 4,92 4,14 2,98 2,50 2,68 2,25 2,53 2,13 0,82 0,69 0,70 0,59 0,58 0,49 Description: Flat brush straight 20mm Black China bristle Length: approx. 34cm Thickness: approx. 8mm from 1 piece from 5 pieces from 10 pieces from 1 piece from 5 pieces from 10 pieces Article: HP-L pcs. Allroundset Consisting of: 2 Round brushes Gr Flat brushes 25/35/50mm 1 Brush pot Consisting of: 2 Foam roller cm 2 Stick-in handles15 +29cm 3 Flat brushes 25/35/50mm 1 Plastic tray 300ml Article: HP-L1030 Plug Bracket 6mm from 1 piece from 5 pieces from 10 pieces 3,79 3,18 3,41 2,87 3,22 2,71 6,79 5,71 6,11 5,14 5,77 4,85 1,18 0,99 1,06 0,89 1,00 0,84 Description: for small roller 10-16mm 1 Covering film 4 x 2,5m Suitable with our: HP-L1010, HP-L1011, HP-L1066, HP-L1067, HP-L1017, HP-L1015, HP-L1018 from 1 piece from 5 pieces from 10 pieces Description: : 15cm Pole height: 4mm For extra fine finishes Article: HP-L1017 Polyamide Roller 15cm from 1 piece from 5 pieces from 10 pieces Article: HP-L1010 Foam Roller 5cm from 1 piece from 5 pieces from 10 pieces 1,24 1,04 1,12 0,94 1,05 0,88 Description: Replacement roll 5cm Super fine structure Outer diameter 35mm 2,19 1,84 1,97 1,66 1,86 1,56 Description: Polyamide roller 15cm Particularly hard-wearing Outer diameter 35mm 0,59 0,50 0,53 0,45 0,50 0,42 from 1 piece from 5 pieces from 10 pieces Description: Polyamide roller 10cm Particularly hard-wearing Outer diameter 35mm Article: HP-L1018 Flocked Foam Roller 11cm from 1 piece from 5 pieces from 10 pieces Article: HP-L1011 Foam Roller 11cm from 1 piece from 5 pieces from 10 pieces 1,79 1,50 1,61 1,35 1,52 1,28 1,79 1,50 1,61 1,35 1,52 1,28 Description: Flocked Foam roll : 11cm For a very fine surface finishes Description: Replacement roll 11cm Super fine structure Outer diameter 35mm 0,79 0,66 0,71 0,60 0,67 0,56 Tools / Accessories Fillers / Additives Cleanser / Thinner phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 161

82 Mould and Casting Epoxy Resins Vacuum Technology Sandwich Material Reinforcement Fabrics Article: HP-L51 Plastic Resin Tray 50ml from 1 piece from 5 pieces from 10 pieces Article: HP-L1026 Polyamide Roller 25cm from 1 piece from 5 pieces from 10 pieces Consisting of: Plastic tray 50ml Size: 12 x 23cm Description: Inclusive stick-in handle with adaptor for telescopic extensions (HP-L1024). Well recommended for works in ponds and swimming pools. epoxy and polyester resin. from 1 piece from 5 pieces from 10 pieces from 20 pieces from 1 piece from 5 pieces from 10 pieces 0,49 0,41 0,44 0,37 0,42 0,35 5,99 5,03 5,39 4,53 5,09 4,28 Article: HP-L1050 Plastic Bucket 14 ltr. with measure 4,90 4,12 4,41 3,70 4,17 3,50 3,92 3,29 Description: epoxy and polyester resin Made from a very resistable material Article: HP-L1024 Telescope Extension 200cm 9,99 8,39 7,99 6,71 5,99 5,03 Article: HP-L301 Plastic Resin Tray 300ml from 1 piece from 5 pieces from 10 pieces Article: HP-L1022 Replacement Roller 25cm from 1 piece from 5 pieces from 10 pieces Consisting of: Plastic tray 300ml Size: 15 x 32cm Description: Polyamide roll 25cm Very durable HP-L1026 from 1 piece from 5 pieces from 10 pieces 0,99 0,83 0,89 0,75 0,84 0,71 Article: HP-L1051 Stirrer with Metal Propeller 4,99 4,19 4,49 3,77 4,24 3,56 2,49 2,09 2,24 1,88 2,12 1,78 Description: For a max. mixing of approx. 15 Kg. Adapter for a drill machine Easy cleaning with aceton Measure: 85 x 400mm Description: Aluminium telescope extension pole 200cm length Good grip and adjustable till 200cm our HP-L1021 and Polyamide Roller HP-L1026 Recommended for a large coating area in pond and swimming pool construction. Article: HP-L1061 Spatula / 1 pack = 100 pieces /pack from 1 pack Basic price/cup from 3 pack Basic price/cup from 5 pack Basic price/cup Description: Spatula / Wood spatula Length: 180mm : 18mm 100 pieces / Pack /pack from 1 pack Basic price/cup from 5 pack Basic price/cup from 10 pack Basic price/cup Article: HP-L1046 Plastic Bucket 5,7 ltr. from 1 piece from 5 piece from 10 pieces from 25 pieces 4,70 3,95 0,047 0,039 4,23 3,55 0,042 0,035 3,76 3,16 0,038 0,032 Article: HP-L1063 Mixing Cup 250ml / 1 pack = 100 pcs 8,95 7,52 0,90 0,7 7,16 6,02 0,72 0,06 6,27 5,27 0,06 0,05 2,32 1,95 2,09 1,76 1,97 1,66 1,74 1,46 from 1 piece from 3 pieces from 5 pieces Description: PP-nature, round EP and UP resin Volume: 250ml or 500ml 250ml = 100 pieces / pack 500ml = 50 pieces / pack Description: PP-nature, round with metal hanger / plastic lid EP and UP resin Volume: 5,7ltr. or 10,8ltr. Article: HP-L1054 Scissors, Stainless Steel 6,90 5,80 6,21 5,22 5,87 4,93 Description: Scissors Optima stainless steel Suitable to cut glass fabrics, carbon fabrics, matts, polyester non-woven absorber, (Not suitable for Aramid fabric) Length: 12 / 29cm Article: HP-L1064 Mixing Cup 500ml / 1 pack = 50 pcs /pack from 1 pack Basic price/cup from 5 pack Basic price/cup from 10 pack Basic price/cup Article: HP-L1048 Plastic Bucket 10,8 ltr. from 1 piece from 5 piece from 10 pieces from 25 pieces 8,95 7,52 0,18 0,15 7,16 6,02 0,14 0,12 6,27 5,27 0,13 0,11 3,50 2,94 3,15 2,65 2,97 2,50 2,62 2,20 Tools / Accessories Fillers / Additives Cleanser / Thinner Mould Release Agent Colours / Coatings phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 163

83 Reinforcement Fabrics Article: HP-L7005 Plastic Bottle 100 ml from 1 piece from 5 piece from 10 pieces from 25 pieces 1,00 0,84 0,95 0,80 0,90 0,76 0,80 0,67 Description: HDPE-nature Incl. screw lid EP resin and solvent-free substances Volume: 100 / 250 / 500 / 1000 ml Article: HP-L4001 Adapter for 29g double syringe from 1 piece from 5 piece from 10 pieces from 25 pieces 1,65 1,38 1,49 1,25 1,32 1,11 1,16 0,98 Description: Adapter for HP-E5K 29g double syringe. You need this adapter to connect the mixing tube (HP- L4002) on the double syringe. Colours / Coatings Vacuum Technology Sandwich Material Article: HP-L7015 Plastic Bottle 250 ml from 1 piece from 5 piece from 10 pieces from 25 pieces 1,07 0,90 1,02 0,86 0,96 0,81 0,86 0,72 Article: HP-L7025 Plastic Bottle 500 ml from 1 piece from 5 piece from 10 pieces from 25 pieces 1,25 1,05 1,19 1,00 1,12 0,95 1,00 0,84 Article: HP-L7035 Plastic Bottle 1000 ml from 1 piece from 5 piece from 10 pieces from 25 pieces 1,43 1,20 1,36 1,14 1,29 1,08 1,14 0,96 Article: HP-L4002 Mixing tube for 29g double syringe from 1 piece from 5 piece from 10 pieces from 25 pieces Plastic Valve 1,89 1,59 1,70 1,43 1,51 1,27 1,32 1,11 Aticle-No.: Quantity incl VAT Description: Length: 85mm Mixing tube with 13 stages and adjustable tip (Ø 1-4mm). Note: After use, the cures in the mixing tube so that multiple use of the mixing tube not possible is. After the application DO NOT twist the mixing tube; DO NOT change the mixing tube until reuse! Cleanser / Thinner Mould Release Agent Mould and Casting Epoxy Resins Article: HP-L7040 Jerrycan 2,5 ltr. from 1 piece from 5 piece from 10 pieces from 25 pieces from 1 piece from 5 piece from 10 pieces from 25 pieces Article: HP-L7060 Jerrycan 10 ltr. 2,95 2,48 2,65 2,23 2,36 1,98 2,21 1,86 5,56 4,68 5,01 4,21 4,45 3,74 4,17 3,51 Description: HDPE-nature Incl. screw lid EP resin and solvent-free substances Volume: 2,5 / 5 / 10 / 20 / 30 ltr. Article: HP-L7070 Jerrycan 20 ltr. from 1 piece from 5 piece from 10 pieces from 25 pieces 10,76 9,04 9,68 8,14 8,61 7,23 8,07 6,78 Article: HP-L7050 Jerrycan 5 ltr. from 1 piece from 5 piece from 10 pieces from 25 pieces from 1 piece from 5 piece from 10 pieces from 25 pieces Article: HP-L7080 Jerrycan 30 ltr. 3,57 3,00 3,21 2,70 2,86 2,40 2,68 2,25 12,46 10,47 11,22 9,42 9,97 8,38 9,35 7,85 HP-L1057 from 1 pcs. 3,99 3,35 HP-L1059 from 1 pcs. 4,99 4,19 HP-L1058 from 1 pcs. 4,99 4,19 Please consult the following diagram as a support to choose the right valve: Article Quantity Resin canister Hardener canister HP-E80FS 4kg / 12,8kg HP-L1057 HP-L kg HP-L1058 HP-L1058 HP-E30FB 33kg HP-L1057 HP-E25D, HP-E25DM 4kg / 12,8kg 48kg HP-L1057 HP-L1058 HP-L1057 HP-L1058 HP-E40D 3kg / 7,5kg 37,5kg HP-L1057 HP-L1058 HP-L1057 HP-L1058 HP-E60K, HP-E120K 7,5kg / 15kg 45kg HP-L1057 HP-L1058 HP-L1057 HP-L1058 HP-E25KL, HP-E45KL 4kg / 12,8kg 48kg HP-L1057 HP-L1058 HP-L1057 HP-L1058 HP-E3000WS 10,2kg 61,2kg HP-L1057 HP-L1058 HP-L1057 HP-L1058 HP-E28L, HP-E29L, HP-E55L, HP-E56L, HP-E110L, HP-E111L 2,8kg 7kg 42kg HP-L1057 HP-L1057 HP-L1058 HP-L1057 HP-L1059 Serie HP-E3000RI Serie HP-E3000GL 3,25kg 10,4kg 39kg HP-L1057 HP-L1057 HP-L1058 HP-L1057 HP-L1057 HP-E300GB 3,375kg 8,1kg / 13,5kg HP-L1057 HP-L1057 HP-L1057 HP-E45GA 4kg / 12,8kg HP-L1057 HP-L1057 Tools / Accessories Fillers / Additives phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 165

84 Reinforcement Fabrics Sandwich Material Article: HP-L1053 Nitril Gloves size 10 from 1 piece from 5 pieces from 10 pieces 4,90 4,12 4,41 3,71 4,17 3,50 Disposable Nitril Gloves Description: Partial coated on BW-Trikot, premium model with cotton lining. Permanent consistent. Colour: yellow Norm: EN Description: High resistance against chemicals More resistant than vinyl and latex Good to wear and easy to handle with Also suitable to use in medicine, laboratory and food processing COMPLETE SET S These set s have been specially put together to get a first introduction and handling with composite materials. Work instructions can be found on our website Carbon Coating - Complete Set With this set you are able to refine a component and thereby it gets an unique look. This set includes enough material for small to medium sized coatings. Article: HP-KS-CB Carbon Coating 1 Set 74,90 62,94 The Set Consists of the Following Products: Quantity 800g Designated Epoxy Resin Coating / HP-E25DM 1m² Carbon Fabric approx. 195g/m² (Twill 2/2) 1m² Peel Ply Fabric approx. 105g/m² (Twill 2/2) Colours / Coatings Mould Release Agent Mould and Casting Epoxy Resins Vacuum Technology Aticle-No.: Size Quantity incl VAT per package per package Basic price per piece Basic price per piece HP-L1080 L / powder free 100 pcs. 10,59 8,90 0,11 0,09 HP-L1081 L / powder free 20 pcs. 4,64 3,90 0,23 0,19 HP-L1082 L / powder free 10 pcs. 2,98 2,50 0,30 0,25 HP-L1085 XL / powder free 100 pcs. 10,59 8,90 0,11 0,09 HP-L1086 XL / powder free 20 pcs. 4,64 3,90 0,23 0,19 HP-L1087 XL / powder free 10 pcs. 2,98 2,50 0,30 0,25 HP-L1090 L / with powder 100 pcs. 10,59 8,90 0,11 0,09 HP-L1091 L / with powder 20 pcs. 4,64 3,90 0,23 0,19 HP-L1092 L / with powder 10 pcs. 2,98 2,50 0,30 0,25 HP-L1095 XL / with powder 100 pcs. 10,59 8,90 0,11 0,09 HP-L1096 XL / with powder 20 pcs. 4,64 3,90 0,23 0,19 HP-L1097 XL / with powder 10 pcs. 2,98 2,50 0,30 0,25 Instruction Carbon Coating 1x Radius Roller 1x 10 pcs Paint-/Laquered 3x Velours Roller / HP-L Pair Nitrile Gloves - size XL 5x Mixing Cups (plastic) 5x Wood Sticks for Mixing 1x Instruction sheet Tools / Accessories Fillers / Additives Cleanser / Thinner 166 phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 167

85 Reinforcement Fabrics Sandwich Material Mould and Casting Epoxy Resins Vacuum Technology glass Repair Kit for Boat Building, Automotive Parts, Pools... Optimal for repairs of GRP and for beginners! With this GRP set you are able to make repairs, e.g. filing work of small holes, repairs of cracks or repairs of osmosis affected components. This set offers a wide range of materials for the processing with small to medium sized repairs. If you do not have any experience with GRP work yet than this set would be the optimal start kit for you! Article: HP-KS-GFK01 glass Repair Kit 1 Set The Set Consists of the Following Products: Quantity Moulding Set - Complete Set 1x 1x 1x Designated HP-XB-1000 XB-Thinner HP-P144/050 Glass Tape 144g/m² 101meters HP-E45KL Epoxy Resin 1600g 1m² HP-T163E Glass Fabric Silane Twill 163g/m² 1m² HP-B320E Biax Glass Fabric 320g/m² 1m² HP-T105P100 Peel Ply Fabric Twill 105g/m² 1x 1x 1x 1x 1x 1x 1x 1x HP-L1001 Laminating Set 10pcs. HP-L1097 Disposable Nitril Gloves 5 pairs HP-L ml Mixing Cups 5pcs. HP-L1061 Wood Spatula 10pcs. 1 x Instruction sheet HP-L1015 Verlous Roller 10cm 3pcs. HP-L1054 Satinless Steel Scissors HP-BF Cotton Flocks 100g HP-PK22-1 Thixotropypowder 1liter With this set you are able to create a positive or negative model from a basic model. This set includes enough material for small to medium sized moulds. Article: HP-KS-FB Moulding Set 1 Set 69,90 58,74 Instruction Boat Building 68,90 57,90 Instruction mould building The Set Consists of the Following Products: Quantity 1100g 800g Designated Epoxy Mould Resin / HP-E30FB Epoxy Laminating Resin / HP-E45KL 1m² Glass Fabric approx. 105g/m² (Twill 2/2) 2m² Glass Fabric approx. 320g/m² +/ ml 200ml 100g 100g 1x Priming Wax Film Release Agent PVA Cotton Flocks Chopped Glass 10 pcs Paint-/Lacquered 5 Pair Nitrile gloves size XL 5x 5x Mixing Cups (plastic) Wood Sticks for Mixing 1 x Instruction sheet ORDERING INFORMATION OFFER: All offers are subject to confirmation and without obligation. All deliveries are based on our general terms and conditions. Miscalculate, clerical error, print mistakes and errors respectively authorise us to correct it, even in case the bill is already drafted. PRICE: Our prices depend on the latest valid price list. All prices quoted in our catalogue are wholesale prices and subject to VAT of 19%. The prices are not including packaging & shipping. TERMS OF PAYMENT: Payment in advance (bank transfer): After placing your order you will receive an , containing your customer number, proforma-invoice, order number and the total amount of your order also including our bank details. Please indicate this information on the payment when paying via bank transfer. Account holder: HP-Textiles GmbH Account number: Sort code: (Oldenburgische Landesbank AG) For bank transfers from foreign countries: S.W.I.F.T.-Code: OLBO DE H2 IBAN DE The goods are dispachted within 24hours after receiving the payment. COD (Cash on delivery): Cash on delivery in Germany plus 7,90 COD fee Cash on delivery for Belgium, Netherlands, Luxembourg, Austria, Czech Rep. and Hungary plus 18,50 COD fee The goods are usually dispatched on the same day. Direct Debit (Only available for German account holders): Paying my order by Direct Debit: After placing your order you will receive a form, which you will need to fill out and send to us by post office. In this form you will be asked to state your details such as invoice address, delivery address, date of birth and bank details (IBAN and BIC). After receiving this form back, we will proof your status and inform you immediately about the status of your order. The goods are dispachted within 24hours after receiving the direct debit form. Via PayPal: PayPal is designed to be a safer way to send money online. PayPal does not expose or sell customers financial information to merchants. Product features include information is automatically sent with a high level of data encryption, to help safeguard against identity theft, every PayPal payment is followed by an confirming transaction and online safety essentials that contains the identity protection guide to help for avoid identity theft. After your online order you ll receive an additional confirming your order incl. customer-number, proforma-invoice-number and total amount. Please indicate this information on the Paypal payment. Ordering Information 168 phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 169

86 Ordering Information ORDERING INFORMATION DELIVERY WITHIN GERMANY: Dispatch Methods: The prices are calculated for standard parcel inclusive insurance (excluding hazardous goods or bulky goods fees) please see bellow the current prices. Up to 2 Kg 4,90 Up to 10 Kg 6,90 Up to 31,5 Kg 9,70 (the price includes 19%VAT) ORDERING INFORMATION DELIVERY WITHIN EUROPE: Delivery outside Germany are normally per courier service. Outside the European Union customs clearence costs or customs duties may occur, that will be charged from your account. Shipping prices for European-Wide-Dispatch by parcel service (mainland only): COUNTRY up to 5kg up to 15kg up to 30kg up to 50kg up to 75kg up to 100kg Ordering Information Extra Shipping Costs for Bulky Items and Hazardous Goods: Resin and hardener systems are treated as hazardous goods and some packaging units as bulky goods. These products are send especially via freight carrier only. For glass or carbon fabrics which are 100cm width or bigger, the shipping costs will be 9,70. You will be informed in a separate about the shipping cost, if this applies to your order. Island Delivery: Delivery to islands has normally a fee of 14,50 per courier service. Hazardous goods will only be delivered by freight carrier. Delivery per Forward Agency: Certain hazardous goods or very heavy rolls can only be dispatched by freight carrier. You can contact us per or even calling and requesting the shipping cost to your city or country. Otherwise, you will receive an with a confirmation concerning the shipping charges. The freight by truck depends on the weight and distance. The actual freight charges will always be charged. DELIVERY TIME: Please allow two working days for goods which are delivered within Germany and up to 6 working days for the delivery to foreign countries. The goods are dispachted within 24hours after receiving the payment. Order today, delivery tomorrow: With Guaranteed 24 Service it is possible to receive your goods the next day. The goods will leave our warehouse only after payment. Please note that the order must be made until 12 o clock and an 8,95 extra charge for this service. *Apllies from Mondays till Thursdays. You can schedule your delivery for 8:00, 9:00, 10:00 or 12:00 o clock on the next day. * Please note that this service does not cover the whole of Germany, please inform us about your postal code (zip code) so we can check if the service is available where you live. * Please contact us for the exact total price for this service. Belgium* Bulgaria Denmark* England Estonia Finland France* Greece Irland Italy* Latvia Lithuania Luxembourg* Netherlands* Norway* Austria* Poland* Portugal* Romania Sweden Switzerland* Slovakia* Slovenia* Spain* Czech Rep.* Hungary* 10,00 13,36 18,40 24,37 39,41 48,74 upon request 10,00 13,36 18,40 24,37 39,41 48,74 15,61 18,26 22,41 35,89 55,76 71,78 32,49 44,76 55,64 66,77 117,60 133,54 26,81 32,35 39,41 54,54 86,89 109,08 14,09 17,26 21,72 33,53 51,30 67,06 upon request 26,81 32,35 39,41 54,54 86,89 109,08 19,54 25,79 33,32 56,02 82,62 112,04 32,49 44,76 55,64 66,77 117,60 133,54 32,49 44,76 55,64 66,77 117,60 133,54 10,00 13,36 18,40 24,37 39,41 48,74 10,00 13,36 18,40 24,37 39,41 48,74 26,81 32,35 39,41 54,54 86,89 109,08 10,00 13,36 18,40 24,37 39,41 48,74 19,54 25,79 33,32 56,02 82,62 112,04 32,49 44,76 55,64 66,77 117,60 133,54 26,81 32,35 39,41 54,54 86,89 109,08 19,54 25,79 33,32 56,02 82,62 112,04 upon request 26,81 32,35 39,41 54,54 86,89 109,08 26,81 32,35 39,41 54,54 86,89 109,08 19,54 25,79 33,32 56,02 82,62 112,04 26,81 32,35 39,41 54,54 86,89 109,08 26,81 32,35 39,41 54,54 86,89 109,08 * Possibility to deliver hazardous goods (LQ) with parcel service (exclusive 19% VAT) WORLD WIDE DELIVERY: In case your country is not listed on the shipping list, please contact us regarding the shipping prices to your country. Please contact us, if you require the shipping price for islands. Many resin and hardener products are categorised as hazardous goods and it is forbidden to send them via parcel service. For this reason we dispatch these products by forwarding agencies. Please ask for shipping costs to your country. Tel: 0049 (0) info@hp-textiles.com Tel: +49 (0) info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com phone: +49 (0) mail: info@hp-textiles.com 171

87 Your system supplier for (fiber) composites HP-Textiles GmbH Otto-Hahn-Str Schapen Germany Phone: +49 (0) Fax: +49 (0) Our Strengths: Development and sales in one hand System Supplier Epoxy resins from own formulation 24h Online-Shopping Cut out according to customer requirements Short delivery times worldwide Technical advice and training Certification ISO 9001