Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
|
|
- Beatrice Malone
- 5 years ago
- Views:
Transcription
1 ccredited to Laboratory locations: Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Porterfield Road Renfrew Scotland P4 8DJ Contact: Mr Bell Tel: +44 (0) Fax: +44 (0) alexander.bell@doosan.com Website: below s covered by the organisation and their relevant activities details ctivity code ddress Doosan Babcock Ltd Porterfield Road Renfrew Scotland P4 8DJ Local contact Mr Bell Tel: +44 (0) Fax: +44 (0) alexander.bell@doosan.com Website: Fuels - Chemical and Physical Metals and Weldments - Chemical Metals and Weldments - Mechanical Metals and Weldments - Metallurgical Metals and Weldments - NDT Site activities performed away from the locations listed above: details ctivity code Premises including commercial and industrial Metals and Weldments - NDT Testing B ssessment Manager: CB3 Page 1 of 7
2 Schedule of ccreditation United Kingdom ccreditation Service ccredited to DETIL OF CCREDITTION COL, COKE, SH, GRIT or DUST and BOILER DEPOSITS Sample Preparation/ Loss of moisture on air drying (including sample preparation to particle size smaller than 212 µm and 2.8 mm) Documented In-House Method WI BS ISO :2016 COL ND SOLID FUELS Chemical Documented In-House Methods based on British Standards: Calorific value Proximate analysis Volatile Matter sh Ultimate analysis Sulphur Chlorine Carbon and Hydrogen WI BS ISO 1928:2009 WI BS ISO 562:2010 WI BS ISO 1171:2010 WI WI BS :1996 WI STM D WI BS 1016: :1996 Nitrogen WI ssessment Manager: CB3 Page 2 of 7
3 Schedule of ccreditation United Kingdom ccreditation Service ccredited to COL ND SOLID FUELS (cont d) Chemical (cont d) Documented In-House Methods based on British Standards: Oxides in Coal sh: l2o3 CaO WI using ICP and Combustion / IR Detection Fe2O3 K2O MgO Na2O SiO2 TiO2 P2O5 SO3 Physical Size analysis WI WI BS :1995 (withdrawn) Hardgrove index WI BS :1995(withdrawn) sh Fusibility WI BS ISO 540:2008 METLS, LLOYS ND METL PRODUCTS Chemical Documented In-House Methods: Iron, steel and other ferrous alloys luminium (total) rsenic Boron Carbon Chromium Cobalt Copper Manganese Molybdenum Nickel Niobium Phosphorus Silicon Sulphur Tin Titanium Vanadium WI using Direct Reading Emission Spectrometry ssessment Manager: CB3 Page 3 of 7
4 Schedule of ccreditation United Kingdom ccreditation Service ccredited to METLS, LLOYS ND METL PRODUCTS (cont d) Chemical (cont d) Documented In-House Methods: Iron, steel and other ferrous alloys (cont d) Chromium Cobalt Copper Manganese Molybdenum Nickel Titanium Vanadium WI using ICP- OES Silicon WI using ICP- OES Carbon and Sulphur WI using Combustion and Infra-Red Detection Nitrogen WI using Thermal Dissociation and Thermal Conductivity Oxygen WI using Reduction with Graphite and Infra- Red nalysis for CO2 Electrode Coatings and Fluxes Moisture WI Mechanical and Physical Brinell Hardness HBW10/3000 BS EN ISO :2014 STM E10-15a STM Vickers Hardness HV30, HV10, HV 5, HV 1, HV 0.5 and HV 0.3 BS EN ISO :2005 STM STM E92-16 Rockwell Hardness B and C BS EN ISO :2016 STM E18-16 STM ssessment Manager: CB3 Page 4 of 7
5 Schedule of ccreditation United Kingdom ccreditation Service ccredited to METLS, LLOYS ND METL PRODUCTS (cont d) Tensile testing: mbient Temperature (Load up to 1200 kn) BS EN ISO :2016 STM E8/E8M-16a STM Elevated Temperature (load up to 200 kn) (up to 700 C) BS EN ISO :2011 STM E21-09 STM Impact testing: Charpy (-196 C and -60 C to 120 C ) BS EN ISO 148-1:2016 STM E23-16b STM Seamless and welded steel tube Bend BS EN ISO 7438:2016 STM E STM Fracture Toughness: CTOD (-60 C to ambient) BS :1991 STM E a Bend BS EN :2013 BS EN :2002+1:2005 Tube - Drift Expanding test BS EN ISO 8493:2004 STM Tube - Flattening test BS EN ISO 8492:2013 STM Metallurgical Metallographic replication assessment for microstructure and creep damage Documented In-House Method WI ssessment Manager: CB3 Page 5 of 7
6 Schedule of ccreditation United Kingdom ccreditation Service ccredited to METLS, LLOYS ND METL PRODUCTS (cont d) Mechanical and Metallurgical Weldments designated in specific welding codes, excluding non-destructive testing - as detailed below: Impact, Tensile, Bend, Hardness, Fracture, Macroscopic and Microscopic Examination Visual inspection by certified staff, BS EN ISO 9016:2012 BS EN ISO 5178:2011 BS EN ISO 4136:2012 BS EN ISO 5173: :2011 BS EN ISO 17637:2011 BS EN ISO :2011 BS EN ISO 9017:2013 BS EN ISO 17639:2013 BS EN ISO 9606:2013 BS EN ISO :2004+2:2012 SME BPVC IX:2015 PI 1104:2013 (21 st Edition) BS :2009 BS :1999 WS D1.1/D1.1M: rd Edition PI SPEC 6 20 th Edition EEMU 158:2014 BS EN ISO :2015 NCE MR0175/ISO 15156:2015 LIGHT and DENSE METLS and LLOYS including forgings and weldments Non-Destructive utomated Ultrasonic Flaw Detection examination method under the supervision of suitably qualified personnel Specific Procedures to client s requirements, based on Documented In-House Procedure OP , B Semi-automated Ultrasonic Flaw Detection; SMRRT-Scan system including TOFD (Time of flight diffraction) Specific procedures to client s requirements based on Documented In-house procedure OP , B Ultrasonic Phased-array inspection method Documented In-house procedure OP and OP BS EN ISO 13588:2012 SME BPVC V 2015 rticle 4, B Dye Penetrant OP BS EN ISO :2013 BS EN :1998 SME BPVC 2015, Section V:rticle 6, B ssessment Manager: CB3 Page 6 of 7
7 Schedule of ccreditation United Kingdom ccreditation Service ccredited to LIGHT and DENSE METLS and LLOYS including forgings and weldments (cont d) Non-Destructive (cont d) Magnetic Particle OP BS EN ISO 17638:2009 BS EN :1999 (superseded) BS EN ISO :2001+ :Feb 2004 (superseded) SME BPVC 2015, Section V:rticle 7, B DENSE METLS Non-Destructive Weldments and forgings Ultrasonic Flaw Detection: Manual Contact Method OP BS EN 10160:1999 BS EN :1998 (superseded) BS EN :1999 (superseded) SME BPVC 2015, Section V:rticle 5 OP , B Preparation of manual NDT contract specific procedures and technical documents. METLS, LLOYS ND METL PRODUCTS Stainless steel and nickel alloys Elemental analysis and Positive Metal Identification (PMI) WI using Portable Niton XRF nalyser, B END ssessment Manager: CB3 Page 7 of 7
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ccredited to Moxley Industrial Centre Western Way Wednesbury WS10 7G United Kingdom
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ccredited to Moxley Industrial Centre Western Way Wednesbury WS10 7G United Kingdom
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Element Materials Technology Sheffield Ltd, Trading as Element ccredited to 3
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Unit 10 Victory Park Victory Road Derby Derbyshire DE24 8ZF ontact: Mr G Tomlinson Tel: +44 (0)1332 275700 Fax: +44 (0)1332 275729 E-Mail: graham.tomlinson@ndtservices.co.uk Website: www.ndtservices.co.uk
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Unit 10 Victory Park Victory Road Derby Derbyshire DE24 8ZF ontact: Mr ndy Harrison Tel: +44 (0)1332 275700 E-Mail: andy.harrison@intertek.com Website: www.ndtservices.co.uk Laboratory locations: below
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 6 Finchwell Close Contact: Mr M Collier Handsworth Tel: +44 (0)114-2437271 Sheffield Fax: +44 (0)114-2437288 South Yorkshire E-Mail: office@metalstechnology.co.uk
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 6 Finchwell Close Contact: Mr M Collier Handsworth Tel: +44 (0)114-2437271 Sheffield Fax: +44 (0)114-2437288 South Yorkshire E-Mail: office@metalstechnology.co.uk
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK A Division of Special Metals Contact: Mr P Scrimshire Wiggin Ltd Tel: +44 (0)1432-352230 Holmer Road Fax: +44 (0)1432-353545 Hereford E-Mail:
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ccredited to Speciality Steels Limited 7 Fox Valley Way Stocksbridge Sheffield
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service High Street, Feltham, Middlesex, TW13 4UN, UK
Schedule of ccreditation United Kingdom ccreditation Service 21-47 High Street, Feltham, Middlesex, TW13 4UN, UK ccredited to Moxley Industrial Centre Western Way Wednesbury WS10 7G United Kingdom Contact:
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Hareness Circle Industrial Estate Aberdeen Scotland AB12 3LY Contact: Mrs D McAdam Tel: +44 (0)1224-890020 Fax: +44 (0)1224-890220 E-Mail:
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 19 Wildmere Road Banbury Oxfordshire OX16 3JU Contact: Mr J Guntrip Tel: +44 (0)1295 261211 Fax: +44 (0)1295 263096 E-Mail: qualityuk@wmtr.com
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Eden House Watling Street Industrial Estate Leadgate Consett County Durham DH8 6TA Contact: Mr R L Hannant Tel: +44 (0)1207 599260 Fax: +44
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK PO ox 869 PC 130 zaiba Contact: Mr Robert McKenzie Tel: +968 24501870 Fax: +968 24595619 E-Mail: info.oman@element.com Website: www.element.com
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ccredited to Metals and Minerals Division 2 Perry Road Witham Essex CM8 3TU Contact:
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK shghal Centre for Research and Development ccredited to l Najma Street number
More informationRITES Lab, Western Region, 210, Amit Industrial Estate, 61, Dr. S.S. Rao Road, Parel, Mumbai, Maharashtra
Last Amended on - Page 1 of 5 I. METALS & ALLOYS 1. Low-Alloy Steel Carbon ASTM E 415-08/ Manganese ASTM E 415-08/ Silicon ASTM E 415-08/ Sulphur ASTM E 415-08/ Phosphorous ASTM E 415-08/ Chromium ASTM
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK PO ox 8 West Street Havant PO9 1LG Contact: Mr Gordon Smith E-Mail: g.smith@portsmouthwater.co.uk
More informationComparison of BS and BS EN for steel materials
Comparison of BS and BS EN for steel materials Appendix This table only highlights the comparison of BS and BS EN on steel materials, which are relevant to plan approval. Title of BS BS BS EN Title of
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ccredited to INOVYN ChlorVinyls nalytical Group Runcorn Cheshire W7 4JE Contact:
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
ccredited to Laboratory locations: Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 12 The Gardens roadcut Fareham Hampshire PO16
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-19221-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 11.04.2017 to 19.05.2019 Holder of certificate: DEKRA
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, hertsey Lane, Staines-upon-Thames, TW18 3HR, UK Tata Steel UK Limited trading as Tata Steel Group Health Safety and ccredited
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ccredited to Laboratory locations: i54 Business Park Valiant Way Wolverhampton
More informationThis annex is valid from: to Replaces annex dated: Locations where activities are performed under accreditation
nnex to ISO/IEC 17025:2005 declaration Element Materials Technology msterdam B.V. Locations where activities are performed under accreditation Location bbreviation/ location code Element Materials Technology
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Laboratory locations: Schedule of ccreditation 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Unit H7 Washington usiness Centre Turbine usiness Park Turbine Way Washington Tyne & Wear SR5
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Metals and Minerals Division 2 Perry Road Witham Essex CM8 3TU Contact: Mrs C Hargreaves Tel: +44 (0)1376 536800 Fax: +44 (0)1376 520819 E-Mail:
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ccredited to Laboratory locations: i54 Business Park Valiant Way Wolverhampton
More informationCERTIFIED REFERENCE MATERIALS (CRM)
CERTIFIED REFERENCE MATERIALS (CRM) Sufficiently Homogenized Indian Reference Materials certified by Round robin analysis for the use of validation of methods and calibration. CSIR-National Metallurgical
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Laboratory locations: 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Scientific Services Contact: Mr Iain Hunter Tel: +44 (0)1823 355951 E-Mail: ITHunter@somerset.gov.uk below s covered
More informationExceptional Turnaround From A Proven Partner in Materials Testing
www.pes-testing.com MECHANICAL TESTING METALLURGICAL ANALYSIS CHEMICAL ANALYSIS NON-DESTRUCTIVE TESTING FAILURE ANALYSIS CONSULTING Exceptional Turnaround From A Proven Partner in Materials Testing About
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELEMENT MATERIALS TECHNOLOGY HOUSTON REGAL ROW 1 9925 Regal Row Houston, TX 77040 Richard Green Phone: 281 848 0270 MECHANICAL Valid To: January 31, 2020 Certificate
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ssay Office and nchorcert nalytical (trading names of The Guardians of the Standard
More informationExceptional Turnaround From A Proven Partner in Materials Testing
www.pes-testing.com MECHANICAL TESTING METALLURGICAL ANALYSIS CHEMICAL ANALYSIS NON-DESTRUCTIVE TESTING FAILURE ANALYSIS CONSULTING Exceptional Turnaround From A Proven Partner in Materials Testing About
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18478-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 01.09.2014 to 31.01.2018 Holder of certificate: MT
More informationAccurate Laboratory Services, Plot No. 71/1-B7, General Block, MIDC Bhosari, Bhosari-Pimpri Road, Pune, Maharashtra
Last Amended on 21.07.2015 Page 1 of 8 I. MECHANICAL PROPERTIES OF MATERIALS 1. Ferrous & Non and Alloys Brinell Hardness IS 1500: 2013 ISO 6506-1: 2014 ASTM E 10: 2014 Rockwell Hardness IS 1586 Part 1:
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK R-TECH Services Ltd trading as R-TECH Materials Testing House Kenfig Industrial Estate Margam Port Talbot SA13 2PE Contact: Dr A Franks Tel:
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Brickendonbury Contact: Mr C Stephenson Hertford Tel: +44 (0)1992 584966 Hertfordshire Fax: +44 (0)1992 554837 SG13 8NL E-Mail: cstephenson@tarrc.co.uk
More informationIPSCO Research & Development Center. Commercial Testing Capabilities
IPSCO Research & Development Center Commercial ing Capabilities A Wide Range of ing IPSCO s 70,000 square foot Research & Development Center combines the most advanced virtual and physical testing equipment
More informationIndustrial Development and Testing Laboratory, 40/107, Jay Bibi Road, Plot No. 18 & 20, Ghusuri, Howrah, West Bengal
Last Amended on - Page 1 of 6 I. MECHANICAL PROPERTIES OF MATERIAL 1. Ferrous & Non-Ferrous Metals & Alloys Tensile test Ultimate Tensile Strength Yield Stress/Proof Stress/E.U.L % Elongation % Reduction
More informationStandard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels 1
Designation: A 372/A 372M 03 An American National Standard Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels 1 This standard is issued under the fixed designation
More informationGB/T Translated English of Chinese Standard: GB/T NATIONAL STANDARD OF THE
Translated English of Chinese Standard: GB/T8163-2008 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 77.140.75 H 48 GB/T 8163-2008 Replacing
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Issue No: 037 Issue date: 07 pril 2017 ccredited to Tatlock House The Teuchats
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ccredited to Tatlock House The Teuchats Leven Fife Scotland KY8 5PF Contact:
More informationATRONA Test Labs, Inc Zenith Parkway, Loves Park, IL Atif Ott Odeh Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ATRONA Test Labs, Inc. 5271 Zenith Parkway, Loves Park, IL 61111 Atif Ott Odeh Phone: 815-229-8620 TESTING Valid to: March 29, 2017 Certificate Number: AT-1119
More informationASTM B363-06a Standard Specification for Seamless and Welded Unalloyed
Standard Specification for Seamless and Welded Unalloyed Titanium and Titanium Alloy Welding Fittings 1. Scope :- 1.1 This specification cover fittings intended for general corrosion resisting and elevated
More informationAppendix 3 JIS Steel and Related Standards 471
Appendix 3 JIS Steel and Related Standards 471 G 3314:1995 G 3315:2002 G 3316:1987 G 3317:1994 G 3318:1994 G 3320:1999 G 3321:1998 G 3322:1998 G 3350:1987 G 3351:1987 G 3352:2003 G 3353:1990 G 3429:1988
More informationAluminium and aluminium alloys. Castings. Chemical composition and mechanical
BSI titles relevant to the cast metals industry (as at 20/5/9) BSI Title International Equiv Aluminium and aluminium alloys. Castings. Chemical composition and mechanical where known 94/713477DC properties
More informationSPECIFICATION FOR TITANIUM AND TITANIUM ALLOY CASTINGS
TECHNICAL LITERATURE: ASME SB-367 [ASTM B367] Company Website: www.metalspiping.com Your Reliable Supplier of Titanium & Nickel Alloys SB-367 SPECIFICATION FOR TITANIUM AND TITANIUM ALLOY CASTINGS SB-367
More informationMATERIALS OF CONSTRUCTION FOR PROCESS EQUIPMENT AND PIPING SYSTEMS
MATERIALS OF CONSTRUCTION FOR PROCESS EQUIPMENT AND PIPING SYSTEMS SECTOR / ENGINEERING NON-TECHNICAL & CERTIFIED TRAINING COURSE Appropriate material selection is the cornerstone of pressure equipment
More informationCompany Profile. Metallurgical Consultancy and Services Sdn. Bhd. Contact Person : Dr. Lim Ching Liang, Director
Company Profile Metallurgical Consultancy and Services Sdn. Bhd. MS ISO/IEC 17025 TESTING SAMM No. 442 Contact Person : Dr. Lim Ching Liang, Director Contact Details: 20, Seksyen U5/17 (PS), Seksyen U5
More informationANSI-ASQ National Accreditation Board/ACLASS
ANSI-ASQ National Accreditation Board/ACLASS SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ATRONA Test Labs, Inc. 5271 Zenith Parkway, Loves Park, IL 61111 Atif Ott Odeh Phone: 815-229-8620 TESTING Valid
More informationATI 718 ATI 718. Technical Data Sheet. Nickel-Base Superalloy INTRODUCTION FORMS AND CONDITIONS AVAILABLE SPECIFICATIONS. (UNS Designation N07718)
ATI 718 Nickel-Base Superalloy (UNS Designation N07718) INTRODUCTION ATI 718 alloy (N07718) is an austenitic nickel-base superalloy which is used in applications requiring high strength to approximately
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11299-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 17.10.2016 to 16.10.2021 Holder of certificate: Salzgitter
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK B229 Contact: Ms Jill French Analytical Services Tel: +44 (0)19467 87408 Sellafield Fax: +44 (0)19467 75154 Cumbria E-Mail: jill.x.french@sellafieldsites.com
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
IO/IEC 17025:2005 chedule of Accreditation United Kingdom Accreditation ervice 2 Pine Trees, Chertsey Lane, taines-upon-thames, TW18 3HR, UK Unit 14 Enterprise Park Industrial Estate Moorhouse Avenue Old
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18053-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 02.08.2018 to 26.07.2022 Holder of certificate: F
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 1144 N. Graham Street Allentown, PA 18109 Tracy Wiswesser Phone: 610 820 9551 tracy@wtti.com http://www.wtti.com MECHANICAL Valid To: March 31, 2019 Certificate
More informationMETALLIC MATERIAL SPECIFICATION
1. Scope: Page: 1 of 5 1.1. This specification shall be utilized in procurement of AISI 8630 modified steel (UNS G86300) in quenched and tempered condition to 22 HRc maximum hardness. 1.2. These materials
More informationIUCLID 5 COMPOSITION AND ANALYSIS GUIDANCE DOCUMENT:
IUCLID 5 COMPOSITION AND ANALYSIS GUIDANCE DOCUMENT: IRON [EINECS NUMBER 231-096-4, CAS NUMBER 7439-89-6] including IRON, FURNACE [EINECS NUMBER 265-998-4 CAS NUMBER 65996-67-0] INTRODUCTION Each REACH
More informationSchedule. Type of Test/ Properties Measured/ Range of Measurement
LABORATORY LOCATION: (PERMANENT LABORATORY) Page: 1 of 9 PROFESSIONAL TESTING SERVICES SDN BHD 7 JALAN MEGA 1 TAMAN PERINDUSTRIAN NUSA CEMERLANG 81550 GELANG PATAH, JOHOR MALAYSIA This laboratory accredited
More informationField PT Item Parameters Reference Standard Schedule
FINE FINISH PROFICIENCY TESTING PROVIDER (A Division of Fine Finish Organics Pvt. Ltd.) Doc :FFPTP-QF-PTSC-009-00 Date of issue : 12-12-2014 PT SCHEME CALENDAR PT Scheme Tensile Strength of Plastics ASTM
More informationProblem Steels 1. Welding Consumables Problem Steels. Section 12 - Welding Consumables. 12 Problem Steels. Welding of Problem Steels 2
Problem Steels 1 Afrox Product Reference Manual Problem Steels Section - Problem Steels 1 Welding of Problem Steels 2 Problem Steels Electrodes 3 Problem Steels MIG & TIG Wires 7 Problem Steels Flux Cored
More informationFINE FINISH PROFICIENCY TESTING PROVIDER (A Division of Fine Finish Organics Pvt. Ltd.) PT SCHEME CALENDAR. E-modulus of Plastics.
Doc :FFPTP-QF-PTSC-009-00 Page 1 of 20 FFOPL-PT001 Mechanical Polypropylene Tensile Strength of Plastics Elongation of Plastics E-modulus of Plastics Density Specific Gravity Water absorption of plastics
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 51 The Freelands Main Road Kempsey Worcester WR5 3NB Contact: Mr W Lewis Tel: +44 (0)1905-821911 E-Mail: info@redstonecal.co.uk Website: www.redstonecalibration.co.uk
More informationAtmy Analytical Labs Pvt. Ltd., I-38, DLF Industrial Area, Phase-1, Faridabad, Haryana. Discipline Chemical Testing Issue Date
Last Amended on - Page 1 of 11 I. METAL & ALLOYS 1. Steel (Carbon Steel & Low Alloy Steel) Carbon ASTM E-415: 2014, IS 228 (Part 1): 1997 (RA 2008) 0.01 % to 1.5 % 0.01 % to 1.5 % Silicon ASTM E-415: 2014,
More informationNATURAL GAS COMPRESSOR STATION PIPELINE WELDING AND RELATED FACILITIES. Engr. Md. Saidur Rahman 1,*
Proceedings of the International Conference on Mechanical Engineering and Renewable Energy 2015 (ICMERE2015) 26 29 November, 2015, Chittagong, Bangladesh ICMERE2015-PI-243 NATURAL GAS COMPRESSOR STATION
More informationAnalysis of Cast Iron Using Shimadzu PDA-7000
Analysis of Cast Iron Using Shimadzu PDA-7000 C112-0510M The analysis of low and high alloy cast iron by optical emission spectrometry is presented. Cast iron alloys are classified by their mechanical
More informationChina NIL Research Center for Proficiency Testing. China NIL Proficiency Testing Schemes (2018)
China Research Center for Proficiency Testing China Proficiency Testing chemes () China Research Center for Proficiency Testing takes great pleasure in informing you that we provide some international
More informationDissimilar Steel Welding of Super Heater Coils for Power Boiler Applications
American Journal of Materials Research 2015; 2(5): 44-49 Published online August 30, 2015 (http://www.aascit.org/journal/ajmr) ISSN: 2375-3919 Dissimilar Steel Welding of Super Heater Coils for Power Boiler
More informationChemical Analysis SEM/EDS. Spectroscopy. Carbon, Sulfur, Nitrogen and Oxygen Analysis
Chemical Analysis For over 30 years, APL, Inc. has been providing accurate and timely chemical analyses to our clients. To allow for the most efficient analysis of your material, a wide variety of spectrometers
More informationSpecification ALLOYED STEEL FOR QUENCHING AND TEMPERING, HIGH STRENGTH All.steel f.quen.a.temp, h.str.
Class: Heat-treatable steel Specification 16-09 ALLOYED STEEL FOR QUENCHING AND TEMPERING, HIGH STRENGTH Class No.:11 JED 723 Previous Edition Abbreviated Title 15-07 All.steel f.quen.a.temp, h.str. 8
More informationThis annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation
Location(s) where activities are performed under accreditation Head Office Voorerf 18 4824 GN Breda Location Abbreviation/ location code Voorerf 18 4824 GN Breda Schutterstraat 27B 6191 RZ Beek Zekeringstraat
More informationProfessional Testing Services Pte Ltd Certificate No. : LA G 32 Kian Teck Road Singapore Issue No. : 19 TESTS/ PROPERTIES
Professional Testing Services Pte Ltd Certificate No. : LA-1995-0088-G 32 Kian Teck Road Singapore 628779 Issue No. : 19 FIELD OF TESTING : Mechanical Testing Date : 05 January 2017 Page : 1 of 7 A. METALS
More informationSchedule. This laboratory has demonstrated its technical competence to operate in accordance with MS ISO/IEC 17025:2005 (ISO/IEC 17025:2005).
LABORATORY LOCATION: (PERMANENT LABORATORY) Page: 1 of 11 PROFESSIONAL TESTING SERVICES SDN BHD 7 JALAN MEGA 1 TAMAN PERINDUSTRIAN NUSA CEMERLANG 79200 ISKANDAR PUTERI, JOHOR MALAYSIA FIELD OF TESTING:
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
ccredited to Laboratory locations: Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Laboratories and Quality ffairs Khansa'a Street
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
ISO/IE 17025:2005 Laboratory locations: Schedule of ccreditation 2 Pine Trees, hertsey Lane, Staines-upon-Thames, TW18 3HR, UK Unit 5 D'rcy usiness Park D'rcy Way Llandarcy Neath West Glamorgan S10 6EJ
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AADFW, INC. 1350 Westpark Way Euless, TX 76040 Phone: 817 540 0153 Billy Brown billy@aadfwinc.com Elise Schiltz elise@aadfwinc.com MECHANICAL Valid To: January
More informationPSL/26 ISSUE 13 PCN CERTIFICATION AVAILABLE. Certification Services Division Newton Building, St George s Avenue Northampton, NN2 6JB
Certification Services Division Newton Building, St George s Avenue Northampton, NN2 6JB Tel: +44(0)1604-893-811. Fax: +44(0)1604-893-868. E-mail: pcn@bindt.org PSL/26 ISSUE 13 PCN CERTIFICATION AVAILABLE
More informationLista standard utilizzati per l'esecuzione dei test RTM Breda
ASTM E415-08 ASTM E415-14 Chemical analysis of carbon steels ASTM E415-99a RCCM MC 1350 ASTM E1086-08 Chemical analysis of stainless steels ASTM E1086-14 Quantometric chemical analysis of laminated or
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18716-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 17.11.2014 to 13.05.2018 Holder of certificate: Institut
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18511-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 30.01.2018 to 29.01.2023 Holder of certificate: TÜV
More informationEAM :2003/05 Revision 01 21/10/2016
European Approval for Materials Data Sheet EAM-0879-04 This data sheet has been raised in accordance with the requirements of Article 15 of the Pressure Equipment Directive 2014/68/EU. The material described
More informationJiangyin Donghao Stainless Steel Pipe Co., Ltd
Jiangyin Donghao Stainless Steel Pipe Co., Ltd March 12 th, 2018 Edition ISO 9001-2008, PED97/23/EC and ASME Boiler and Pressure Vessel Code Certificate certified. Built in 2005, Cover area over 30,000
More informationGeneral Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
ICS 77.140.60 DRAFT Jamaican Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling BUREAU OF STANDARDS JAMAICA This Jamaican National Standard
More informationStandard Specification for Titanium and Titanium Alloy Castings 1
Designation: B 367 06 Standard Specification for Titanium and Titanium Alloy Castings 1 This standard is issued under the fixed designation B 367; the number immediately following the designation indicates
More informationDirective 97/23/EC Pressure Equipment
Directive 97/23/EC Pressure Equipment Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-19890-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 03.11.2016 to 14.04.2020 Holder of certificate: Aktien-Gesellschaft
More informationOverview of Non-Destructive Testing and Inspection Course Syllabus
Overview of Non-Destructive Testing and Inspection Course Syllabus This course reviews the general principles of seven non-destructive testing methods and their derivative techniques The following class
More informationISO INTERNATIONAL STANDARD. Implants for surgery Metallic materials Part 1: Wrought stainless steel
INTERNATIONAL STANDARD ISO 5832-1 Fourth edition 2007-06-15 Implants for surgery Metallic materials Part 1: Wrought stainless steel Implants chirurgicaux Matériaux métalliques Partie 1: Acier inoxydable
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 4520 Willow Parkway Cleveland, OH 44125 Alexander Manuk Phone: 216 641 3290 CHEMICAL Valid To: May 31, 2019 Certificate Number: 0161.01 In recognition of the
More informationSTAINLESS STEEL SHEETS
STAINLESS & NICKEL ALLOY CHATHAM STEEL CORPORATION 59 STAINLESS STEEL SHEETS TYPE 04, 04L, 6, 6L No. 2B Finish Cold Rolled, Annealed *No. 2D Finish No. Finish Polished One Side No. 4 Finish Polished One
More informationMolybdenum. Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium- Designation: A 387/A 387M 03
Designation: A 387/A 387M 03 Used in USDOE-NE Standards Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium- Molybdenum 1 This standard is issued under the fixed designation A 387/A
More informationRequest for Exclusion from Remedies: Section 232 National Security Investigation of Steel Imports
Request for Exclusion from Remedies: Section 232 National Security Investigation of Steel Imports Exclusion Request Requirements: Only individuals or organizations operating in the United States that use
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELEMENT MATERIALS TECHNOLOGY BROKEN ARROW LLC 3100 North Hemlock Circle Broken Arrow, OK 74012 Gilbert Monos Phone: 918 258 6066 gil.monos@element.com MECHANICAL
More informationIdentification. Type Analysis
Page 1 of 12 Unit Display: English Print Now Custom 455 Stainless E-Mail Datasheet Add to My Materials UNS Number S45500 Identification Type Analysis Carbon 0.05 % Manganese 0.50 % Phosphorus 0.040 % Sulfur
More informationMaterial and Process. Specification
s 146-67- 1 of 7 Document By: Title Name 1. Purpose 1.1 This document defines approved revision levels of Material and Process specifications used by Onboard Systems. This list is for supplier reference
More information