MALOUT INSTITUTE OF MANAGEMENT & INFORMATION TECHNOLOGY
|
|
- Neil Wilcox
- 5 years ago
- Views:
Transcription
1 MALOUT INSTITUTE OF MANAGEMENT & INFORMATION TECHNOLOGY Name: Dr. Rajesh Choudhary FACULTY PROFILE Designation : Assistant Professor, Incharge Mechanical Engg. Deptt. Qualification: Ph.D (Mechanical Engg.) Specialization: Non Conventional Machining, Processing of metal matrix composites, Modelling & Optimization of machining processes Publications in International Journals and Conferences Sr. No. Title of paper Name of the Journal/ Conference Experimental and Morphological Journal of Materials Investigations into Electrical & Discharge Surface Grinding of Performance 6061Al/Al2O3 10% composite by (Springer IF: 0.98) composite tool electrode Vol. & Year Pages 23 (4) April Machining Performance and Surface Integrity of AISI D2 Die Steel machined using Electrical Discharge Surface Grinding Process Journal of Materials & Performance (Springer IF: 0.98) 22(12) Dec Analysis of Electro discharged machined surfaces of AISI D3 Steel by composite tool electrode Structural Analysis of electrodischarge machined surfaces of EN31 Tool steel International Journal of surface & Materials Technology Tribology: Material Surfaces Interfaces (Maney publishers) 02 July-Dec (2) Performance & Surface Integrity of Nimonics 75 alloy machined by Electrical discharge Machining Investigations into Electrical discharge surface grinding of 6061Al/Al2O3 10% composite by composite tool electrode 4 th International Materials Processing & Characterization 3 RD International Production & Industrial (CPIE 2013) March, 2015 Materialstoday: Proceedings (Elsevier) 2(2015)
2 Experimental Analysis of EN-31 tool steel by electric discharge machining. Analysis & Evaluation of Heat Affected Zones in Electrical discharge Machining of EN-31 Die steel. Analysis of electro discharge machined surfaces of EN-31 Tool steel. Study of electrical discharge machining process for EN-31 Tool steel International Production & Industrial (CPIE 2007) March, 2007 Publications in National Journals and Conferences Indian Journal of 67(12) & Material 2008 Science (IJEMS) Journal of Scientific & Industrial research Manufacturing Technology Today 17 April Jan Experimental Investigation into electrical discharge machining of AISI D3 die steel using composite tool electrode on Innovation in Futuristic materials & manufacturing techniques Dec Proceedings to be published by Taylor & Francis group Effect of cryogenic treated tool electrodes on electrical discharge machining of AISI D3 die steel Electroless copper plating of silicon carbide SiC for Cu/SiCp metal matrix composite A review on Abrasive Electrical Discharge Surface Grinding (AEDSG): A hybrid approach on EDM and conventional grinding Electrical discharge machining (EDM) as a production process: A practical approach on Innovation in Futuristic materials & manufacturing techniques National conference on emerging vistas of Mechanical In 21st century on Welding Technology (NCWT 2009) on recent developments in Mechanical Engg. at TIET Patiala Dec Feb Proceedings to be published by Taylor & Francis group Abstract Book published Nov Role of Industry Institute to Product Management. Role of Mechatronics in Manufacturing. Changing Management culture, its accurance, Efforts Involvement and their Failure. Emerging Trends in Mechanical Engg. at NIT Kurukshetra. Role of Mathematics in. MIMIT Malout on Transforming Traditional Business. PCMA Conference at Ludhiana Mar Mar Feb
3 19. Change Management: Essence of Organization Development. Transforming Traditional Business. PCMA Conferences at Ludhiana Feb. LIST OF RESPONSIBILITIES S.No Name of Charge Duration Incharge Mechanical Engg till date Chairman DRC Committee to Incharge Transport to & to Incharge Guest House to Resident Engineer cum Estate officer to Incharge M.Tech Mechanical Engg to Member of core committee for TEQIP-II Proposal Incharge Institute Time Table to till date 8. Nodal Officer of Institute for welfare department of Punjab Govt to date 9. Co-Chair in Technical session at conference RITME 2015 at MIMIT 27-28, March Head Examiner for PTU Evaluation Center at MIMIT from 2009 to till date 1 Expert for interview for the selection of Lecturer workshop practice at GZSCET Bhathinda Member of AICTE project evaluation committee (PEC)
4 DETAILS OF PROJECTS COMPLETED S.No Title of Project Granting Agency Amount of Grant Year of Completion Hostels for SC/ST students Modernization of tool room of workshop in Mechanical Engg. Department (MODROBS) Modernization of Manufacturing lab with Flexible Manufacturing Cell (MODROBS) AICTE, New Delhi 2 Crores 2014 AICTE, New Delhi 9.5 Lakhs 2014 AICTE, New Delhi 14.5 Lakhs 2009 DETAILS OF THESIS COMPLETED S.No Title of M.Tech Thesis Name of Institute/Uni. Year of degree awarded Investigation on Performance of Copper Ceramic Based Composite Tool Electrode in Electric Discharge Machining Process Punjabi University, Patiala 2011 Some investigations into Electrical Discharge Machining of Titanium alloy (Ti-6Al-4V) using different tool electrodes MIMIT, Malout 2014 REVIEWER OF JOURNALS S.No Name of the Journal Journal of Manufacture Journal of Brazilian Society of Mechanical Sciences and Advance Materials Research and Application SHORT TERM COURSE ORGANISED S.No Name of STC Sponsored Agency Duration/Year Advances in Materials & Manufacturing Technology PTU, Jal. One week/ July 2011 Advances in Welding Technology & Surace PTU, Jal. One week/ July 2012
5 Research Methodology NITTTR, Chd April 2013 PROFESSIONAL MEMBERSHIPS S.No Associations Membership No. IAENG Hong Kong (International) ISTE New Delhi (National) LM 95979
PROFILE OF Dr TILAK RAJ. Officiating Registrar of YMCA University of Science and Technology.
PROFILE OF Dr TILAK RAJ Officiating Registrar of YMCA University of Science and Technology NAME IN FULL : Tilak Raj DATE OF BIRTH : 09-09-1964 E-MAIL : tilakraj64@rediffmail.com, tilakraj64@gmail.com,
More informationFACULTY PROFILE. : Dr.B.CHOKKALINGAM. : Quality Engineering, Materials Engineering,
FACULTY PROFILE Name Designation Email ID : Dr.B.CHOKKALINGAM : Associate Professor : chokkalingam.me@srit.org Area of Specialization : Production Engineering, Quality Engineering, Materials Engineering,
More informationThe National Institute of Engineering, Mysore FACULTY PROFILE
01. Name of the Faculty [in Block Letters] The National Institute of Engineering, Mysore FACULTY PROFILE DR. Y S VARADARAJAN 02. Date of Birth DD MM YYYY 03. Sex Male Female 04. Designation 05. Department
More informationBIO-DATA Prof. Vinod Kumar
BIO-DATA Prof. Vinod Kumar 1. Name :Dr. Vinod Kumar 2. Designation : Professor 3. Department : Mechanical Engineering 4. Date of Birth : 21.09.1970 5. Address for Correspondence : Department of Mechanical
More informationRESUME. Ph.D. ( ): Mechanical Engineering Department, Birla Institute of Technology,
RESUME Raghvendra Kumar Mishra Assistant Professor Mechanical Engineering School of Engineering Gautam Buddha University, Greater NOIDA, Gautam Budh Nagar, U.P. PIN-201310, India Phone -91-120-23446002
More informationRESUME. : NIT, Rourkela. REC, Rourkela. BEC, Bagalkot.
RESUME Name : SURESH TOTAPPA DUNDUR Date of birth :21 st May 1962 Birth Place Address E-Mail : Gadag : B-3, Staff Quarters, Basaveshwar Engineering College, BAGALKOT-587 102, Karnataka State : sureshdundur@gmail.com
More informationCurriculum Vitae. Assistant Professor in Mechanical & Industrial Engineering, IIT Roorkee.
Dr. Manish Mishra Curriculum Vitae Designation - Date of Birth - 2-4-1970 Assistant Professor in Mechanical & Industrial Engineering, IIT Roorkee. Qualification - BE (Mechanical), ME (Energy Systems &
More informationFACULTY PROFILE. Class /CGPA I class % I class 70.05% I class with Distinction Ph.D Date of joining :
Staff Official Address with E-mail Id FACULTY PROFILE : S.R.Sundara Bharathi Mobile Number : 96880464. Personal Details Age : 35 Date of Birth : 0.07.98 Sex & Marital Status Citizenship Qualification :
More informationBIODATA. Month & year of passing
BIODATA NAME & ADDRESS:Basavaraj M. Angadi Department of Mechanical Engineering BLDEA s Vachana Pitamaha Dr.P.G.Halakatti College of Engg & Tech Vijayapur-586103, Institute mail id: mech.angadi@bldeacet.ac.in
More informationProfile. 1994(April)-2000(January) : Lecturer, Sant Longowal Institute of Engineering, Longowal Sangrur Punjab.
Profile Prof.(Dr.) Raj Kumar Fellow IE(India) Qualification : 2010, Doctor of Philosophy (Power Plants), MDU, Rohtak : 1999, M.Tech. Energy Studies, IIT Delhi : 1993, B.Tech. (Mechanical Engineering) Regional
More informationDr. Ajmal Hussain. Assistant Professor, Department of Civil Engineering, Aligarh Muslim University, Aligarh , India
Dr. Ajmal Hussain Assistant Professor, Department of Civil Engineering, Aligarh Muslim University, Aligarh-202002, India Contact Information Emails: ajmalamin.iitr@gmail.com ajmal.hussain @ zhcet.ac.in
More informationProfile of the faculty to be included in the dynamic website. (Residential) : , Gayathri Nagar M.R. Palle, TIRUPATI
Profile of the faculty to be included in the dynamic website. Photo Name : Dr. J. KARTHIKEYAN Address (Official ) : Prof. J. KARTHIKEYAN Department of Civil College of Sri Venkateswara University TIRUPATI
More informationVELAMMAL ENGINEERING COLLEGE, CHENNAI
VELAMMAL ENGINEERING COLLEGE, CHENNAI DEPARTMENT OF MECHANICAL ENGINEERING Name : Dr. S.Satish kumar Designation : Professor & Head Qualification : B.E.(Mech.), M.E., Ph.D Specialization : Manufacturing
More informationCurriculum Vitae. Dr. HARI NARAYAN SINGH. Mechanical Engineering Department. N. I. T. Jamshedpur
Curriculum Vitae Dr. HARI NARAYAN SINGH Professor, Mechanical Engineering Department N. I. T. - 831014 E-mail: hnsingh.me@nitjsr.ac.in, hnsingh.jam@gmail.com Mob. No: 0-9431934051, 0-7903212936 Address
More informationCurriculum Vitae. Dr. Arun Kumar Tiwari
Curriculum Vitae Dr. Ph.D (Thermal and Fluid Engg.) Associate Professor and Associate Dean(DSW) Department of Mechanical Engineering Institute of Engineering & Technology Dr APJ Abdul Kalam Technical,
More informationInternational Journal of Advance Engineering and Research Development. Optimization of MRR in Sinker EDM Process Using Genetic Algorithm Technique
Scientific Journal of Impact Factor (SJIF): 4.14 International Journal of Advance Engineering and Research Development Volume 3, Issue 3, March -2016 e-issn (O): 2348-4470 p-issn (P): 2348-6406 Optimization
More informationDR. CHANNIWALA SALIM ABBASBHAI
CURRICULUM VITAE DR. CHANNIWALA SALIM ABBASBHAI Professor, Director-In Charge SVNIT, Surat E-Mail : sac@med.svnit.ac.in sac_svr@hotmail.com Telephone : (O) 0261 2201574 (R) 0261 2490267 (M) 099241-66200
More informationAssociate Professor. Office Address: Address for correspondence: D 17/1, Okhla Vihar, Jamia Nagar,New Delhi Academic Performance: Dr SHAH ALAM
Dr SHAH ALAM Associate Professor Office Address: University Polytechnic, Mechanical Engineering, F/O Engineering & Technology, Jamia Millia Islamia, Jamia Nagar, New 110025 Tel. No. 011-26980665, 011-2698686,
More informationDr. Mamatha M Assistant Professor Department of Chemical Engineering BIET, Davangere
Dr. Mamatha M Assistant Professor Department of Chemical Engineering BIET, Davangere [reddy5252@gmail.com; mamta5252@gmail.com] Work Experience : 15 Years Worked as a Lecturer in Chemical Engineering Department
More informationCURRICULUM VITAE. Dissertation Topic: Heat Transfer Studies on Thermosiphonic Flow in an Annulus.
CURRICULUM VITAE Dr. Mohammad Asif 568, RamlilaTilla Muzaffar Nagar, UP- 251002 asifhcst@gmail.com, masif@zhcet@ac.in asif_amu2004@yahoo.co.in +919675421591, +919808074586 PRESENT POSITION Assistant Professor,
More informationCOMPARISON OF CRYO TREATMENT EFFECT ON MACHINING CHARACTERISTICS OF TITANIUM IN ELECTRIC DISCHARGE MACHINING. Rupinder Singh and Bhupinder Singh
International Journal of Automotive and Mechanical Engineering (IJAME) ISSN: 2229-8649 (Print); ISSN: 2180-1606 (Online); Volume 3, pp. 239-248, January-June 2011 Universiti Malaysia Pahang DOI: http://dx.doi.org/10.15282/ijame.3.2011.1.0020
More informationCurriculum Vitae of Dr. Prem Pal Bansal Page 1 of 7 CURRICULAM VITAE
Curriculum Vitae of Dr. Prem Pal Bansal Page 1 of 7 Dr. Prem Pal Bansal Assistant Professor Department of Civil Engineering Thapar University Patiala (Punjab) 147 004 India Email: prempalbansal1@yahoo.com
More informationNational Institute of Technology, Tiruchirappalli: Performa for CV of Faculty/ Staff Members
Curriculum Vitae Brief Profile: 1-2 paragraphs (not exceeding 500 words) Dr.D.Lenin Singaravelu is working as Assistant Professor in the Department of Production, National Institute of Technology, Trichy.
More informationEfficiency Optimization during Electric Discharge Machining of H-13 Steel Based on Grey Relation Analysis
International Journal of Scientific & Engineering Research, Volume 4, Issue 8, August 2013 Efficiency Optimization during Electric Discharge Machining of H-13 Steel Based on Grey Relation Analysis Naveen
More informationBio Data. Dr. Jaspal Singh
Bio Data Of Dr. Jaspal Singh 1. Name: Dr. Jaspal Singh 2. Qualification: M.Sc. (Physics), Ph.D.(UGC Regulations 2009) 3. Designation: Assistant Professor in Physics 4. Date of Birth: 25/05/1981 5. Permanent
More information: Dr. B D V CHANDRA MOHAN RAO. :
Name Designation Department Mail Id : Dr. B D V CHANDRA MOHAN RAO : Professor : Civil : chandramohanrao_bdv@vnrvjiet.in, bdvcmrao@gmail.com Experience (in years) : Teaching 21, Research 2, Others (If any,
More informationYear of Passing Percentage/ Division Jammu st Division University
Dr. Syeda Shazia Bukhari, Assistant Professor, SOB Académie Qualification----Graduation onwards Qualification Board/ University Year of Passing Percentage/ Division B.B.A Jammu 2001 1 st Division University
More informationFACULTY PROFILE. Management. Degree Branch / Specialization College University. Govt.College of Technology, Coimbatore.
FACULTY PROFILE Name Designation Email ID Area of Specialization Total Experience : T.Shanmugapriya : Assistant Professor (Sr.Gr.) : tspriyavijay@gmail.com Shanmugapriya.ce@srit.org : Construction Engineering
More informationPUBLICATIONS PUBLICATIONS IN INTERNATIONAL JOURNALS
PUBLICATIONS PUBLICATIONS IN INTERNATIONAL JOURNALS Complete Reference of Journal MOJ Civil Engineering, MedCrave Publishing, Edmond, Oklahoma, United States, Volume 2 Issue 1-2017 Geomatics, Natural Hazards
More informationFACULTY PROFILE. 4. Area of Expertise : Welding Engineering: Ph.D topic: 6. Research Area : Welding Engineering: Ph.D topic:
FACULTY PROFILE 1. Name of the faculty with Qualification : Dr. T.VIGRAMAN M.E,Ph.D 1. Age & Date of birth : 52 & 20.05.1964 2. ation : Associate Professor Sr.Gr 3. Experience in NEC as on 01.06.16 : 17
More informationDepartment of Automobile Engineering
Department of Automobile Engineering Name & Photo : Dr.E.Ganapathy Sundaram Designation: Qualification : Area of Specialization : Teaching Experience : Associate Professor &HoD M.E., Ph.D., Thermal and
More informationDEVATHA Chella Purushothaman
DEVATHA Chella Purushothaman Office CI 116, Department of Civil Engineering, National Institute of Technology-Karnataka, Surathkal, MANGALORE--575 025 (D K) Karnataka INDIA Phone : (+91)-824-2473971 (Off.)
More informationCURRICULUM VITAE. Dr. Kh.Zaheeruddin. 4/1129, Sir Syed Nagar, Aligarh UP, INDIA Phone No
CURRICULUM VITAE Name: Father s Name: Residence : Date of Birth: Religion: Academic Qualifications: Ph.D. 1979, AMU, Aligarh-India Specialization in Tribology M.Sc. Engineering 1973, AMU, Aligarh-India
More informationINTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY
IJESRT INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY Developments in Electrical Discharge Grinding process: A review Dr. Govindan P *1, Praveen V V 2 2 M.Tech student, *1 Assistant
More informationVelammal Engineering College Department of Civil Engineering 20/8/15/5
Department of Civil Name & Photo: Dr.R.GANESAN M.E., Ph.D. Designation: Professor & Head Qualification: B.E., M.E., Ph.D. Area of Specialization : Environmental Teaching Experience : No. of Conference/FDP/workshop/Seminar
More informationOPTIMAL SELECTION OF PROCESS PARAMETERS OF ULTRASONIC MACHINING (USM) SYSTEM
OPTIMAL SELECTION OF PROCESS PARAMETERS OF ULTRASONIC MACHINING (USM) SYSTEM BY H. L A L C H H U A N V E L A B.E. (Mech), MNNIT, Allahabad (Formerly M.N.R.E.C., Allahabad), 1987; M.Tech. (Mech), IT-BHU,
More informationAnalysis of EDM Process Parameters by Using Coated Electrodes
Analysis of EDM Process Parameters by Using Coated Electrodes D. L. Panchal 1, S. K. Biradar 2, V. Y. Gosavi 3 1 AssociateProfessor, Mechanical Engineering, CHH.SH College of Engineering, Aurangabad (MH),
More informationCURRICULUM VITAE. R & D polytechnic college, Ludhiana Lecturer 04 August 2006 to 31 July 2007
Dr. Amit Bansal Ph.D. (Mechanical & Industrial Engineering) E-mail ID: amit.bansal978@gmail.com Tel: +91 8289000931 Professional Experience CURRICULUM VITAE Organization Designation Time Period Punjab
More informationDepartment of Mechanical Engineering
Velammal College Department of Mechanical Name & Photo : Dr. A. PRADEEP Designation: Qualification : ASSISTANT PROFESSOR III M.E., Ph.D. Area of Specialization : Teaching Experience : Welding, Manufacturing
More informationEffect of Soft Material Hardness and Hard Material Surface Morphology on Friction and Transfer Layer Formation; Dry Condition
International Journal of Recent Technology and Engineering (IJRTE) ISSN: 2277-3878, Volume-2, Issue-4, September 213 Effect of Soft Material Hardness and Hard Material Surface Morphology on Friction and
More informationFaculty Profile. Address : Centre for Environmental Studies. S.No Degree Name of the college / University Year of Completion
Faculty Profile Name : Dr. S KARTHIKEYAN Designation : Associate Professor Subject Expertise : Environmental Engineering Address : Centre for Environmental Studies Anna University, Chennai-600 025 Phone:
More information5. Qualification Sl. Graduation Institute University Year of Passing 1 Ph. D Gulbarga University Gulbarga University Gulbarga 2013
1. Name : Dr. Sharada P. 2. Designation : Associate Professor 3. Specialization : Biotechnology 4. E-mail : sharadabec@yahoo.co.in Sharadabec1980@gmail.com Contact : 9449985749 5. Qualification Graduation
More informationANNA UNIVERSITY REGIONAL CAMPUS MADURAI DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING FACULTY PROFILE
ANNA UNIVERSITY REGIONAL CAMPUS MADURAI DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING FACULTY PROFILE Full Name (With qualification) Designation Department E Mail Area of Interest SSANJEEVE KUMAR, ME
More informationEXPERIMENTAL STUDY OF ELECTRICAL DISCHARGE MACHINING ON STAINLESS STEEL WORKPIECE USING ONE PARAMETER AT A TIME APPROACH
EXPERIMENTAL STUDY OF ELECTRICAL DISCHARGE MACHINING ON STAINLESS STEEL WORKPIECE USING ONE PARAMETER AT A TIME APPROACH Param Singh Mechanical Engineering Department, Motilal Nehru National Institute
More informationResearch Areas : Quality Engineering, Maintenance Engineering, Supply Chain, Manufacturing and Industrial Systems Engineering
Associate Professor Department of Mechanical Engineering National Institute of Technology, Hamirpur H.P (Under MHRD, Govt.of India) 177005-INDIA Email: rksfme@nitham.ac.in, rksnithmr@gmail.com Phone No
More information- 1 - Anis Afzal. Greater Azad Enclave Dhorra, Aligarh India Website: Mobile:
- 1 - Anis Afzal Greater Azad Enclave Dhorra, Aligarh 202 002 India Website: http://www.amu.ac.in Mobile: 0091-9412593840 E-mail: anis_afzal@hotmail.com Education and Degrees: Ph.D., Department of Electrical
More informationThe National Institute of Engineering, Mysore
The National Institute of Engineering, Mysore FACULTY PROFILE 0. Name of the Faculty [in Block Letters] 02. Date of Birth 04. Designation 05. Department 06. Date of Joining NIE Dr. ARAVINDRAO M. YADWAD
More informationANALYSIS OF MACHINING CHARACTERISTICS DURING ELECTRO DISCHARGE MACHINING OF AISID3 STEEL
ANALYSIS OF MACHINING CHARACTERISTICS DURING ELECTRO DISCHARGE MACHINING OF AISID3 STEEL 1 Komal Krishna Patil, 2 Vijay D. Jadhav 1 Post Graduation Student, 2 Professor 1 Mechanical Engineering Department
More informationCurriculum Vitae: DR. Manisha Gupta. e Cell No ,
Curriculum Vitae: DR. Manisha Gupta e mail:manishapimt@gmail.com manisha.gupta@pimt.info Cell No. 91 92162 58572, 9356263001 1. OBJECTIVES I am ordained to pursue career in the field of education in an
More informationDr. Dwarikanath Ratha Assistant Professor Department of Civil Engineering Thapar University, Patiala Punjab, India
Dr. Dwarikanath Ratha Assistant Professor Department of Civil Engineering Thapar University, Patiala Punjab, India Dr. DWARIKANATH RATHA E-mail: dnath.ratha@thapar.edu dwarika_pune@yahoo.com dwarikarath@gmail.com,
More informationCURRICULUM VITAE. Dr. Upasana Sharma. Profile : Qualification : Research Supervision: Publications :
CURRICULUM VITAE Dr. Upasana Sharma Date of Birth : 01/12/1974 Permanent Address: H. No. -1621, PUSHPAC Complex, Sector 49B, Chandigarh Email: usharma@pbi.ac.in M: 9815703437 Profile : Presently working
More informationMetallographic Analysis of Pure Titanium (Grade-2) Surface by Wire Electro Discharge Machining (WEDM)
Metallographic Analysis of Pure Titanium (Grade-2) Surface by Wire Electro Discharge Machining (WEDM) Anish Kumar* 1, Vinod Kumar 2, Jatinder Kumar 3 *1 Department of Mechanical Engineering, M.M.University
More informationParametric Optimization of Electrical Discharge Machining Process for Machining of AISI5160 with Copper Electrode using Taguchi Method
IJRMET Vo l. 7, Is s u e 2, Ma y - Oc t 2017 ISSN : 2249-5762 (Online) ISSN : 2249-5770 (Print) Parametric Optimization of Electrical Discharge Machining Process for Machining of AISI5160 with Copper Electrode
More informationAcademic Qualifications
Dr. Kausik Chattopadhyay Associate Professor Department of Metallurgical Engineering Indian Institute of Technology (BHU) Varanasi 221 005; Phone: 0091-542-2369346, ext.234 (O) Fax: 0542-2369478 E-mail:
More informationINVESTIGATION OF INFLUENCE OF SOME PROCESS PARAMETERS IN EDM OF INCONEL-800 WITH SIVER COATED ELECTRODE
INVESTIGATION OF INFLUENCE OF SOME PROCESS PARAMETERS IN EDM OF INCONEL-800 WITH SIVER COATED ELECTRODE K. Karunakaran and M. Chandrasekaran Department of Mechanical Engineering, Vels University, Chennai,
More informationDr. Mayadhar Debata. 12/ continuing Scientist CSIR-Institute of Minerals & Materials Technology Bhubaneswar
Dr. Mayadhar Debata 1. Designation: Scientist 2. Institution: CSIR-Institute of Minerals & Materials Technology 3. Address: Advanced Materials Technology Department CSIR-Institute of Minerals & Materials
More informationSTUDY OF TOOL WEAR RATE OF DIFFERENT TOOL MATERIALS DURING ELECTRIC DISCHARGE MACHINING OF H11 STEEL AT REVERSE POLARITY
Int. J. Mech. Eng. & Rob. Res. 2014 Nibu Mathew and Dinesh Kumar, 2014 Research Paper ISSN 2278 0149 www.ijmerr.com Vol. 3, No. 3, July 2014 2014 IJMERR. All Rights Reserved STUDY OF TOOL WEAR RATE OF
More informationThe National Institute of Engineering, Mysore FACULTY PROFILE
The National Institute of Engineering, Mysore FACULTY PROFILE 0. Name of the Faculty [in Block Letters] 0. Date of Birth 0. Designation 0. Department 0. Date of Joining 07. Phone Dr. H.D. PHANEENDRA DD
More informationBoard Of Public Exams, Kerala. Calicut University. Calicut University. Calicut University. Undergoing PhD at CUSAT, Cochin
FACULTY-PROFILE Name : K.S.PADMAVATHY Date of Birth : 15-09-1980 Highest Qualifications : M.Tech Academic Performance :- High School to Sl. Highest No. Qualifications School/Institute Year of Passing Class/Grade
More informationPARAMETRIC ANALYSIS ON MAGNETIC ABRASIVE MACHINING
PARAMETRIC ANALYSIS ON MAGNETIC ABRASIVE MACHINING GUIDED BY:- Prof. N.N.CHAUDHARY GROUP NO-20 PREPARED BY :- CHANDRASHEKHAR -120780119104 KISHORKUMAR PADHIYAR -120780119101 DALPAT VAGHELA -120780119019
More informationProfessional Synopsis. Nearly 10 years of teaching and research experience in graduate and post graduate courses. Education
Dr. Kuntal Assistant Professor Department of Zoology Gargi College,University of Delhi Mail ID: kuntal.kalra@gmail.com Professional Synopsis Nearly 10 years of teaching and research experience in graduate
More informationOptimization of machining parameters for electrical discharge machining using RSM
Optimization of machining parameters for electrical discharge machining using RSM Saurabh Sen 1, Harsh Pandey 2, Shubham Gupta 3 1&3 M-Tech Research Scholar 2 Assistant Prof. Dept.of MechianicalEngg Dr.
More informationResearch Publications: International Journal: 18 National Journals: 09 International/National Conferences/Seminars: 20
Brief Profile Shailendra Kumar (Ph.D. IIT Kharagpur) Professor & Head, Department of Civil Engineering I/C Director, Institute of Technology Guru Ghasidas Vishwavidyalaya (A Central University), Bilaspur,
More informationOptimization and Statistical Analysis of Machining Parameters for Tool Wear Rate on EN-19 Alloy Steel
Optimization and Statistical Analysis of Machining Parameters for Tool Wear Rate on EN-9 Alloy Steel Abstract Manish Vishwakarma Mechanical Engineering Department, M.A.N.I.T, Bhopal-5 (India) manishvishwa88@gmail.com
More informationPh.D. BIET / VTU Composite Materials. UBDTCE / Kuvempu University. B.E. Industrial Production Engineering
Updated on: (Mention the date on which you edit this document). Name: Dr. RAJANEESH N. MARIGOUDAR. Designation: Professor & Head of the Department. Department: Mechanical Engineering 4. Academic Background:
More informationDr. V.KANNAN,B.E.(Civil),M.E.(Str.).,Ph.D
Dr. V.KANNAN,B.E.(Civil),M.E.(Str.).,Ph.D Associate Professor and Head Department of Civil Engineering kannan_civil81@yahoo.in +91 4635 256343 Extn: 155 +919787211014 Address: 4/83, PerumalKovilStreet,
More informationUSING TOPSIS METHOD TO OPTIMIZE THE PROCESS PARAMETERS OF D2 STEEL ON ELECTRO-DISCHARGE MACHINING
International Journal of Mechanical Engineering and Technology (IJMET) Volume 9, Issue 13, December 2018, pp. 1083 1090, Article ID: IJMET_09_13_113 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=9&itype=13
More informationOptimization of Process Parameters in Electric Discharge Machining Of Inconel 718 by Using Copper Electrode
IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) e-issn: 2278-1684,p-ISSN: 2320-334X, Volume 13, Issue 3 Ver. III (May- Jun. 2016), PP 51-55 www.iosrjournals.org Optimization of Process Parameters
More informationFACULTY PROFILE. Designation : Professor of Civil Engineering & Dean, Faculty of Architecture
FACULTY PROFILE Name : Dr. BENNY MATHEWS ABRAHAM Designation : Professor of Civil Engineering & Dean, Faculty of Architecture Date of Birth :` 23/05/1960 Official address : School of Engineering, Cochin
More informationPERFORMANCE OF DIFFERENT ELECTRODE MATERIALS IN ELECTRO DISCHARGE MACHINING DIN
PERFORMANCE OF DIFFERENT ELECTRODE MATERIALS IN ELECTRO DISCHARGE MACHINING DIN 1.2714 LAKHWINDER SINGH 1, MANPREET SINGH 2, S.C.VERMA 3 1 Department of Mechanical Engg., Sant Longowal institute of Engineering
More informationDr. Pawan Kumar Sharma
Dr. Pawan Kumar Sharma Assistant Professor in the Department of Physics D.O.B 06.07.1968 email ID pawankumarsolan@email.com Marital Status Married EDUCATION 06/1985-05/1988 B.Sc., M.L.S.M.College, Sundernagar,
More informationIntegral University. Six years and ten months working experience in Integral University as a Assistant Professor from 24 th
Integral University Dr. AMINA JAFRI Department: Environmental Science Integral University, Lucknow Email: amina.jafri@yahoo.co.in amina@iul.ac.in Academic Profile: Ph.D. awarded on Characterization and
More informationMULTIRESPONSE OPTIMIZATION OF PROCESS VARIABLES OF POWDER MIXED ELECTRICAL DISCHARGE MACHINING ON INCONEL-600 USING TAGUCHI METHODOLOGY
International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) ISSN(P): 2249-6890; ISSN(E): 2249-8001 Vol. 8, Issue 1 Feb 2018, 711-722 TJPRC Pvt. Ltd. MULTIRESPONSE
More informationOPTIMIZATION OF EDM PROCESS PARAMETERS ON HYBRID COMPOSITE WITH ONE FACTOR APPROACH
International Journal of Mechanical Engineering and Technology (IJMET) Volume 8, Issue 5, May 2017, pp. 567 576, Article ID: IJMET_08_05_062 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=8&itype=5
More informationParametric Effects during Nonconventional Machining of PRALSICMMC by EDM
International Journal of Advancements in Research & Technology, Volume, Issue, February-13 1 Parametric Effects during Nonconventional Machining of PRALSICMMC by EDM K. L. Meena 1, Dr. A. Manna, Dr. S.S.
More informationAddress: Complete Profile Date of Birth: Educational Qualifications:
Name of the Faculty: M.KODEESWARA RAMANATHAN Designation: Scientific Officer/ Asst.Professor E-mail Address: mallsentkode@yahoo.co.in Complete Profile Date of Birth: 17.10.1957 Educational Qualifications
More informationCURRICULUM VITAE. Bachelor of Engineering, Civil, B.V.B. College of Engineering Hubli, India, 1991.
Dr. BASAVANAND M DODAMANI Associate Professor CURRICULUM VITAE Department of Applied Mechanics & Hydraulics National Institute of Technology Karnataka, Surathkal 575 025 Mangalore, INDIA E mail : mani@nitk.ac.in
More informationEffect of machining parameter on the surface roughness of AISI 304 in silicon carbide powder mixed EDM
Decision Science Letters (2017) 21 2 Contents lists available at GrowingScience Decision Science Letters homepage: www.growingscience.com/dsl Effect of machining parameter on the surface roughness of AISI
More informationTeaching Fellow, Institute for Energy Studies, College of Engineering Guindy, Anna University, Chennai from September-2012.
Cellphone : 9994314416 e-mail ID : sakthi2energy@gmail.com Address : Resident Counsellor, Block V - Marutham, Engineering College Hostels, College of Engineering Guindy Campus, Anna University, Chennai
More informationOptimal Machining Conditions For Turning Of AlSiC Metal Matrix Composites Using ANOVA
Optimal Machining Conditions For Turning Of AlSiC Metal Matrix Composites Using ANOVA J. Satheesh 1, Tajamul Pasha 2, Harish 3, T. Madhusudhan 4 Professor, Department of Mechanical Engineering, SJB Institute
More informationEligibility Qualifications for admission to various. M.E. / M.Tech. / M.Arch. / M.Plan. degree programmes (TANCET 2018)
Eligibility Qualifications for admission to various M.E. / M.Tech. / M.Arch. / M.Plan. degree programmes (TANCET 2018) I. FACULTY OF CIVIL ENGINEERING Sl. No. P.G Programmes Eligible Qualifications 1.
More informationRESUME. : Dr. Mahesh Chand Garg
RESUME NAME : Dr. Mahesh Chand Garg FATHER'S NAME : Sh. Kanwar Sain DATE OF BIRTH : 12.12.1965 PRESENT ADDRESS : Dr. Mahesh Chand Garg Professor Haryana School of Business Guru Jambheshwar University,
More informationTRIBOLOGICAL BEHAVIOUR FOR STIR CAST Al5086/Gr/Al2O3 HYBRID MATRIX COMPOSITE
TRIBOLOGICAL BEHAVIOUR FOR STIR CAST Al86/Gr/Al2O3 HYBRID MATRIX COMPOSITE K.CHANDRASEKARAN *1, S.AJITH 2, P.ABBAS 3, A.YASAR ARAFATH 4, K.VINOTHKUMAR Department of Mechanical Engineering, MAM School of
More informationProfessional Membership: Life time member of ISHMT (Indian Society of Heat and Mass Transfer)
DR. VAIBHAV JAIN Designation: ASST. PROF. Qualification: Ph. D, M.E., B.E. Specialization: Thermal Engineering Email: vaibhavjain@mait@ac.in Office Address: Room No. 234, IInd Block, MAIT, Sec 22, Rohini,
More informationMATHEMATICAL MODELING OF PROCESS PARAMETERS IN ELECTRICAL DISCHARGE MACHINING ON 17-4 PH STEEL USING REGRESSION ANALYSIS
MATHEMATICAL MODELING OF PROCESS PARAMETERS IN ELECTRICAL DISCHARGE MACHINING ON 17-4 PH STEEL USING REGRESSION ANALYSIS Chandramouli S. and Eswaraiah K. Department of Mechanical Engineering, Kakatiya
More informationComparative Study of Electro Discharge Machining with the use of Additional Rotary Tool EDM Performance During Machining of EN-8 Material
2018 IJSRST Volume 4 Issue 8 Print ISSN: 2395-6011 Online ISSN: 2395-602X Themed Section: Science and Technology Comparative Study of Electro Discharge Machining with the use of Additional Rotary Tool
More informationSURFACE TECHNOLOGIES AND ADVANCED MANUFACTURING
SURFACE TECHNOLOGIES AND ADVANCED MANUFACTURING AEROSPACE POWER GENERATION OIL & GAS www.hycrome.com TEL: +44 (0)1282 418300 FAX: +44 (0)1282 418310 About Hycrome Hycrome was originally established in
More informationDepartment of Human Resource Management (HRM) IIEST Shibpur Annual Report
Department of Human Resource Management (HRM) IIEST Shibpur Annual Report 2013-2014 Name of the Department : Human Resource Management A. About the department : The Human Resource Department ( HRM ) Department
More informationInternational Journal of Innovative Research in Advanced Engineering (IJIRAE) ISSN: Issue 1, Volume 2 (January 2015)
An Experimental Study of Material Removal Rate and Electrode Wear Rate of High Carbon-High Chromium Steel (AISI D3) In EDM Process Using Copper Tool Electrode Avdesh Chandra Dixit * Amit Kumar Ravindra
More informationid(s): Courses taught:
Name: Designation: Professor Dr. H. Suresh Hebbar Atawale Qualification: Ph.D., (IIT Delhi, 1999), Tribology of Composite Materials M.E. (Indian Institute of Science, Bangalore, 1987 ), Machine Design
More informationSponsored Projects: Sponsoring Agency. University Grants Commission, New Delhi. Indian National Science Academy
Sponsored Projects: S.No. Title Principal Investigator 1. Technical Analysis of Forge Welded Cannons of Western India 2. Catalogue of Forge Welded iron cannons in Western Maharashtra Forts Dr. P. P. Dr.
More informationEducational qualifications
H. Jane Helena Associate Professor Division of Structural Engineering Department of Civil Engineering College of Engineering, Guindy Anna University, Chennai 25 Educational qualifications Degree University/Institution
More informationSurface Engineering, Biomaterials, Corrosion, Laser Materials Processing
Dr. Renu Kumari Assistant Professor Department of Metallurgical & Materials Engineering Email: renu.met@nitjsr.ac.in, renumetalbit@gmail.com Areas of Speciallization/Interest: Surface Engineering, Biomaterials,
More informationI st (National Scholarship)
Dr. S. Mandal, Associate Professor, Dept of Civil Engg., IIT (BHU), Varanasi, U.P. 221 005 Academic Qualifications (Matric onwards): High School Examination Passed Higher Secondary Board/ University West
More informationThe potential for laser processing of metallic composites
The potential for laser processing of metallic composites AILU Workshop: Laser processing of polymer, metal and ceramic composites 3 rd December 2008 Presentation by Stephen Kyle-Henney Metal Matrix Composites
More informationFaculty Profile. Teaching: 07 Research: 05 Administration: Total: 07
Faculty Profile Name: Sanjay Sharma Designation: Assistant Professor Department: Mechanical Engineering Email ID: sanjaysharma@smvdu.ac.in Contact Number and Extn.: 9906134266, 2247 Qualification: DME,
More informationEffect of Electrode Material and Electrical Discharge Machining Parameters on Machining of CO-CR-MO
International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS Vol:16 No:03 53 Effect of Electrode Material and Electrical Discharge Machining Parameters on Machining of CO-CR-MO Abbas Razavykia
More informationCurriculum-Vitae. Rohtash Kumar, Ph.D. Education. Honors/ Medals/Scholarships. Research Interests. Research Projects/ Grants. Research Supervision
Curriculum-Vitae Rohtash Kumar, Ph.D. Asst. Professor Department of Statistics Faculty of Physical Sciences Punjabi University Patiala Patiala, PIN-147002 (Pb), INDIA Contacts: (+91) 80547-80540 (M), 0175-304-6444-45
More informationInvestigation of Recast Layer Formed on Titanium Alloy Machined by Wire Electric Discharge Machining
IJIRST International Journal for Innovative Research in Science & Technology Volume 3 Issue 04 September 2016 ISSN (online): 2349-6010 Investigation of Recast Layer Formed on Titanium Alloy Machined by
More informationCurriculum Vitae. UGC-NET Qualified (Public Administration), December 2013, Electronic Certificate No.:
Curriculum Vitae Name: Harpreet Singh Father s Name: Mr. Sawinder Singh Mother s Name: Mrs. Harjinder Kaur Designation: Assistant Professor (Public Administration), University College, Benra- Dhuri, District
More information