Research Areas : Quality Engineering, Maintenance Engineering, Supply Chain, Manufacturing and Industrial Systems Engineering

Transcription

1 Associate Professor Department of Mechanical Engineering National Institute of Technology, Hamirpur H.P (Under MHRD, Govt.of India) INDIA Phone No (0), Research Areas : Quality Engineering, Maintenance Engineering, Supply Chain, Manufacturing and Industrial Systems Engineering a) Educational Qualification Details Degree/ Dip. B.Tech Discipline / Specialisation Mechanical Engg. M. E Industrial Engineering Ph. D. Department of Mechanical and Indl Engineering Division / Grade 75.18% First with (Hons) Univ Medal 9.81 (CGPA) (Hons.) and Gold Medal Year University/ Institute 2000 Punjab Technical University, Jallandhar, Punjab,India 2002 Thapar Institute of Engineering and Technology TIET, Thapar University, Patiala Punjab Indian Institute of Technology, IIT Roorkee Uttranchal b) Research Experience and Areas Involved in a Full-Time Research Programme (Under fellowship of MHRD, GOI) in the Mechanical Engineering Department of Indian Institute of Technology Roorkee, leading to the Ph.D. Thesis on Analysis, Design and optimization of Quality, Reliability and Maintainability aspects in production Systems. The Topic of the research is of great interest to practicing engineers and managers to ensure quality and reliability of their product(s)/processes. After analyzing the system with the help of RCA, the maintenance managers can develop better insight into the system constituents, their function, failure mode and its effect on system performance. In the area of maintainability the presented work solves the maintenance mix problem and provides approach to implement TPM as a maintenance strategy. On the Quality front, a framework to implement and sustain Quality Costing System will help the

2 managers to (i) properly identify the set of alternatives required to define the taxonomy of quality-based investments. (ii) Set-up both exogenous and endogenous quality priorities. Research Areas : Quality Engineering, Maintenance Engineering, Supply Chain, Manufacturing and Industrial Systems Engineering c) Employment profile Position held Year Organization Head of Department Mechanical Engineering Associate Professor ( INR) Assistant Professor ( INR) Assistant Professor ( INR) Oct 2014 to Sep June,12 to till date June 2009-May 31,2012 Jan May 31,20009 National Institute of Technology, Hamirpur National Institute of Technology, Hamirpur National Institute of Technology, Hamirpur National Institute of Technology, Hamirpur Research Scholar (MHRD Assistantship) July Dec,2005 Indian Institute of Technology, IIT Roorkee, Roorkee, Uttranchal Lecturer National Institute of Technology, Hamirpur d) Research Guidance B.Tech. / B.E/M.E/Ph. D. Thesis Supervision Degree Title /Area of research projects Year Name of scholar PhD Supply Chain Management 2008 Prashant Chauhan (Submitted) PhD PhD PhD Supply Chain Performance Measurement Electric Discharge Machining of Tungsten Alloy Quality Management in MSMEs Framework for Characterizing the Design of Vendor Managed Inventory 2010 Ms Pratima Mishra (Awarded) 2012 Er Jagdeep Singh (In progress) 2014 Manjeet Kharub (In progress) 2013 Kulbhushan Phogat

3 B.Tech. (Mech.) B.Tech. (Mech.) B.Tech. (Mech.) Design and Analysis of Cellular Manufacturing systems Mitigating Bullwhip effect in SCM Analysing the effcet of Maintenance Strategies on the Throughput of FMC Investigating Flexibility and Cell formation Issues in FMS Analysing Reliability issues in Industrial robot in FMC Investigation of Material Handling Issues in FMS Scheduling in Flexible Manufacturing System Enhancing competitive advantage through Quality management tools cum techniques Integrating Reliability, Availability and Maintainability Aspects for improved operation industry Quality management practices in industries 2013 Arun Sivaraj 2013 Naveen kumar 2014 Ashok Kumar Gaula 2014 Shailendra Kumar 2015 Anant Tiwari 2015 Radhakant 2015 Deepanchal Bansal Jatin,Suraj, Ravneesh, Hardyl,Mukesh HarshVerdhan,Pratik, Gajendra,Senthil Akshay, Kartikeya, Dinesh, Ashok Gopal. B.Tech. (Mech.) Performance Analysis of Maintenance System in Cement Plant Kushul Gupta, Ankush, Rahul and Vipul B.Tech. (Mech.) Performance Measurement of Flexible Manufacturing System Ankit Sood, Prashant Sharma, Adheesh Gupta B.Tech (Mech) Reliability Modelling HVAC systems B.Tech (Mech) Maintenance Decision Analysis using Holonic System B.Tech (Mech) Ergonomic Design of Wheel

4 Chair e) Sponsored Research Projects Title of Project Analysis of quality reliability aspects in Industries Quality management Aspects in MSMEs Funding Agency/ Financial Outlay Total period Name of P.I. UGC 0.75 lac Dr.Rajiv Sharma DST 9.32 lac In Progress Dr f) Courses / Training Programmes Organized Title of the Course Sponsored By Duration Year Maintenance Management in Industries Repair and Maintenance of Motor Vehicle Systems QMS Quality management Systems Concept and Issues TEQIP One Week 2006 TEQIP One Week 2007 TEQIP One Week 2014 Maintenance Management in Industries Advances in Quality Management I Industry TEQIP One Week 2014 TEQIP One Week 2015 g) Conferences Organized/Attended Title of the Conference Sponsored By Duration Year National Conference on Quality, Reliability and Maintainability aspects in Engineering Systems TEQIP December 27-28, i) Membership of Professional Bodies Life Member, Indian Institution of Industrial Engineering (India) Member Institution of Engineers, Calcutta India Faculty Advisor, Institution of Engineers (India),Student Chapter (MED)

5 Membership ISTE k) Referee / Editorial Member of International Journals International Journal of Production Research IEEE Transactions on Reliability Journal of Production Planning and Control Jou of Quality reliab management Journals Published by Indersciemnce, Emerald, Springer, Elsevier L) Institutional Responsibilties Warden of Boys Hostel OIC (Purchase) Deptt OIC(Deptt Library) OIC(Time Table) Member (DUGC) Member (BoD) Member (DPGC) Convener (DUGC) Coordinator Institute News letter Membrer Secretary IEDC Cell

6 Annexure Publications Refereed International Journals S.No Paper Title Authors Name Journal Reference Journal Impact Factor 1 Systematic Failure Mode Effects Analysis (FMEA) using Fuzzy Linguistic Modeling 2 FLM to Select Suitable Maintenance Strategy in Industries Using MISO Model, Dinesh Kumar and Pradeep kumar (2005), International Journal of Quality and Reliability Management Vol. 22 (9), pp (2005), International Journal of Quality in Maintenance Engineering Vol.11 (4), pp (2006) 3 Manufacturing Excellence through TPM Implementation Practical analysis (2006), International Journal of Industrial Management and Data Systems, Vol.106 (2), pp (2012). 4 A Framework to Implement QCS through Process Cost modeling (2007), Total Quality Management Journal, TQM Vol. 19 (1), pp Behavior Analysis and Resource Optimization for an Industrial System (2007) International Journal of Industrial and Systems Engineering Vol. 2(4), pp FM A Pragmatic Tool to Model, Analyze and Predict Complex Behavior of Industrial Systems (2007) Engineering Computations- International Journal for Computer- Aided Engineering and Software Vol 24 (4) pp , (2012) 7 Quality Costing in process industries through QCAS-A Practical Case (2007) International Journal of Production Research vol. 45, pp Taylor and Francis 1.460(2012) 8 Modeling System Behavior for Risk and Reliability Analysis Using KBARM (2007) Quality Reliability Engineering International, Wiley Interscience Vol.23 pp (2006) 9 An Integrated Approach to Analyze System Behavior Using Knowledge Based ARMS 10 Modeling and Analyzing System Failure Behavior using RCA, FMEA and NHPPP model (2007) International Journal of Reliability and Safety Vol 1 (3) pp (2007) International Journal of Quality and Reliability Management, Vol. 24(5), pp

7 11 Application of Fuzzy Methodology to Build Process Reliability -A Practical Case, (2008) International Journal of Product Development Vol.5 (2) pp Fuzzy modeling of system behavior for risk and reliability analysis 13 Predicting Uncertain Behavior of Industrial System Using FM A Practical case 14 Performance modeling in critical engineering systems using RAM analysis 15 A framework for system failure behavior analysis using FM, RCA and FMEA, (2008) International Journal of System Science, Volume 39, Issue 6, 2008, pages Taylor and Francis (2008)Applied Soft Computing. Vol.8 pp , (2008), Reliability Engineering & System Safety, Volume 93, Issue 6, June 2008, Pages Journal of Quality in Maintenance Engineering, Vol 16 (1)(2010) (2012) (2013) 2.441(2013) 16 Reengineering The Supply Chain Human Dimensions Using Six- Sigma Framework, Pratima Mishra International Journal for Quality Research Volume pp Conceptual Framework For Improving Business Performance With Lean Manufacturing And Successful Human Factors Interventions A Case Study 18 Computing RAM Indices for Reliable Operation of Production Systems 19 Integrated framework to optimize RAM and cost decisions in a process plant Sharma Kumar Rajiv & Sharma Pooja, Pooja Sharma International Journal for Quality Research, Volume pp Advances in Production Engineering & Management Journal Volume 7 (2012) Issue 4 (December 2012) Journal of Loss Prevention in the Process Industries, Volume 25, 6, 2012, Pages Integrating Six Sigma Culture andtpm Framework to Improve Manufacturing Performance in SMEs And Rajan Gopal Sharma Accepted for publication in Quality Reliability Engineering International, (In Presss) Wiley Interscience A hybrid framework based on SIPOC & Six Sigma DMAIC for improving process dimensions in supply chain network 22 Benchmarking SCM performance and Empirical analysis- A case from paint industry, 23 Impact of Key Human Dimensions on SCM Performance Qualitative and Mishra P. and Sharma, R. K. (2014). Mishra P. and Sharma4., R. K. (2014). Mishra P. and Sharma, R. K - International Journal of Quality & Reliability Management, 31 (5), (Emerald) Logistics Research, 7(1), (Springer). International Journal of Business Excellence (InderScience).. (2014).

8 Empirical Analysis 24 Qualitative And Quantitative Evaluation Of Barriers Hindering The Growth Of MSMEs" 25 Attaining competitive positioning through SPC an experimental investigation from SME 26 Effect of Powder Mixed Electrical Discharge Machining (PMEDM) on Difficult-tomachine Materials a Systematic Literature Review 27 Determination of multiperformance characteristics for powder mixed electric discharge machining of tungsten carbide alloy 28 "Analyzing the effect of maintenance strategies on throughput of a typical Flexible Manufacturing Cell 29 An ISM based framework for structural relationship among various manufacturing flexibility dimensions, 30 Cell Formation Heuristic Procedure Considering Production Data". Sharma, R and Manjeet Sharma, R and Manjeet Sharma R and Jagdeep Singh and Jagdeep Singh and Ashok Gaula and Shalindra and Shalindra (2014) International Journal of Business Excellence, In Press (Inder Science). Measuring Business Excellence, Volume: 18 Issue: 4, 2014 J. Manuf. Sci. Prod. 2014; In press 0.6 Proc IMechE Part B: J Engineering Manufacture 1 10 IMechE 2014 Journal of Systems Assurance Engineering and Management. In Press International Journal of System Assurance Engineering and Management DOI /s ,IJSA- D International Journal of Production Management and Engineering, In Press 0.72 Refereed National Journals S.No Paper Title Authors Name Journal Reference 1 Decision Support System for Conducting FMEA 2 Reliability Analysis of Repairable Systems Using NHPPP Models 3 Reduction of process defects in chrome plated cylinder liners of Diesel locomotives using TQM tools 4. Off line quality control using taguchi parameteric design-a case study, Dinesh Kumar and Pradeep kumar, Dinesh Kumar and Pradeep kumar, 2007, Journal of Institution of Engineers (IE), India 2007, Vol.88 pp , Industrial Engineering Journal, IIIE,2007, Vol 36(2) pp , Industrial Engineering Journal, IIIE,2005, Vol 34(3) pp , Industrial Engineering Journal, IIIE,2006, Vol 35(7) pp 5-10.

9 5 Achieving quality and productivity through Kaizen-A case study 6. Simulated availability of CO 2 Cooling System in a Urea Fertilizer Plant 7. Integration of reliability and maintainability aspects for improved performance in process industry 8 OEE for performance Analysis of Machines, Sunand Kumar Rajiv Sharma, Pooja Sharma, Ankit Sood, Adheesh Gupta, Prashant Sharma 2006, Industrial Engineering Journal, IIIE,2006, Vol 35(9) pp , Industrial Engineering Journal, IIIE,2006, Vol 36(10) pp , Industrial Engineering Journal, Vol 2 (9) pp22-27, 2010 Industrial Engineering Journal, Vol 5 Issue 10, Oct 2012 International Conferences S.No Paper Title Authors Name Reference 1 Analyzing Reliability Aspects of International Conference on HVAC systems Manufacturing and Industrial Engineering - ICMIE 2012, 2 A framework imbibing Leagile and Six-Sigma culture to improve SCM performance 3 An Integrated Framework of Lean, Agile and Six Sigma supply chain performance 4 Improving Lean Manufacturing Paradigm in FMS through Ergonomic interventions 5 Knowledge Based Reasoning to Model Uncertainties in FMEA 6 FP approach to model and analyze System behavior, - Mishra P. and Sharma, R. K. (2011). Mishra P. and Sharma, R. K. (2011). February 26-28, 2012, Singapore. International Conference on Advances in Supply Chain and Manufacturing Management, December 16-18, 2011 at IIT, Kharagpur. India. The International Conference on Enhancing organizational growth through innovation and creativity issues, opportunities and challenges, May 5-6, 2011 International Conference on Ergonomics and Human Factors HWWE IIT Chennai, Dinesh Kumar and Pradeep kumar 2005, International Conference on Productivity and Quality Research ICPQR-2005, IIT Delhi, India. pp , International Conference on Reliability safety Engineering INCRESE IIT Khargpur, India pp Parametric Study for Optimal Maintenance Decisions Using FM, 8 Fuzzy logic methodology to prioritize failure cause in FMEA, 2005, I4th ISME International Conference, Dec-2005, New Delhi, India. Proc of Int. conf. construction environment and manufacturing systems, ICET- 2004, Allied publishers, New Delhi, pp

10 National Conferences 1 Integrating ISO9000 with TQM Spirits A case study. 2 Quality through Continuous Improvement (Kaizen Concept) 3 Grey and Fuzzy Approach to Synthesize FMEA Information for Risk and Reliability Analysis 4. MMS-Maintenance Management Strategies- A review, P.L Bali, B.L Sethi Sunand Kumar & Rajiv Kumar Sharma 2003, National Conference on Recent Advances in Mechanical Engineering (NCME -2003) TIET Patiala Punjab 2007 National Conference on Quality, Reliability aspects in Engg systems NIT Hamirpur QRMAES 2007 pp National Conference on Quality, Reliability aspects in Engg systems NIT Hamirpur QRMAES 2007 pp National Conference on Quality, Reliability aspects in Engg systems NIT Hamirpur QRMAES 2007 pp