4 N E X T G E N E R A T I O N

Transcription

1 N X T N R A T O N lectronically nhanced Solenoid Valves rass and Stainless Steel odies 1/" - 2" NPT 2/2 3/2 /2 SRS eneration eatures ncrease in pressure ratings to A levels on all products (up to a 500% improvement) Lower power operation Voltage ranging uilt-in surge suppression limination of A hum ncrease in A and operating temperatures Low solenoid temperature rise Longer coil life due to lower operating temperatures and electrical surge suppression Solenoid approvals to UL, SA, and directives Available with lass, ivision 2 coils ( prefix) RoS 2 ompliant Nominal Ambient Temp. Ranges 1 to 10 (-10 to 60 ) or 8262/8263/831 Series: -13 to 10 (-25 to 60 ) ow to order ind the valve that you are looking for in the provided specifications tables. The tables contain the following information designed to help you in making your selection: Pipe Size Orifice ia. v low ^ ) Operating Pressure ifferential (psi) Max. Agency Air-nert as Water Light 300 SSU Max luid Temp. rass onst. Ref. UL Stainless Steel onst. Ref. UL A/ Agency Wattage Approx. Shipping Weight (lbs.) Min. 1/2 5/ P09 m When ordering a valve product, specify the ASO base catalog number (x. 8210P09). This number will always be 8 digits long. hoose one of the three operating voltage ranges (100-20V/50-60z/, 2-120V/50-60z/ or 12-2/) and add it to the base catalog number (x. 8210P V/50-60z/). f you want to enhance the product with one or more of the options allowed in the Optional eatures hart for that catalog number, please add the appropriate prefix or suffix (as shown): LTRONALLY NAN Pipe Size Orifice ia. Solenoid Options ase atalog Number Resilient Materials Other Standard Rebuild Kit lass, ivision 2 oil rass Stainless Steel NR KM 1/2 5/8 8210P09 - l V J N - - V MO M Optional lass, ivision 2 solenoid (x. 8210P V/50-60z/) f an KM elastomer and manual operator are required, add VMO to the back of the base catalog number. (x. 8210P09VMO 2-120V/50-60z/) When ordering a rebuild kit for a valve, supply the rebuild kit number as shown in the table. (x ) When ordering a rebuild kit for a valve with a suffix, add the suffix to the appropriate standard rebuild kit. (x. The rebuild kit for the above valve with KM is V) All constructions are available with prefix for lass, ivision 2 requirements. PM R Oxygen Service PT Urethane Vacuum Manual Operator Mounting racket rass Stainless Steel When ordering a replacement coil, select from the following: Voltage Range Valve Prefix Replacement oil Part Number V/50-60z/ * 2-120V/50-60z/ * 12-2/ * V/50-60z/ * 2-120V/50-60z/ * 12-2/ * Solenoid nclosures Standard: Watertight, Types 1, 2, 3, 3S,, and X. Optional: lass, ivision 2 for azardous Locations and Watertight, Types 3, 3S,, X. (To order, add prefix to catalog number.) Note See ngineering Section for valve parts in contact with fluids and additional information. 105

2 2/2 3/2 /2 SRS eneration LTRONALLY NAN 2-Way eatures Two-way (2/2) eneration solenoid valves have one inlet port and one outlet port ontrol of air, water, light oil, and non-corrosive media Normally closed (opens when energized) and normally open (closed when energized) operation Pipe sizes 1/8 to 2 inch Operating Pressure ifferential (psi) 2-Way Specifications (nglish units) Pipe Size 106 Orifice ia. v low Min. Air-nert as Max. Water Max Agency Agency Wattage Light 300 SSU luid Temp. rass onst. Ref. UL Stainless Steel onst. Ref. UL A/ eneral Service - Normally losed 1/8 3/ R175 ƒ 1 l 1/8 3/ R099 ƒ 1 l /8 3/ R277 1 m 8262R178 1 m 1/8 1/ R105 1 m 8262R17 1 m 1/8 1/ R077 1 m / 3/ R107 ƒ 2 l / 3/ R181 ƒ 2 l 1/ 3/ R109 2 m 8262R183 2 m 1/ 1/ R232 2 m 8262R185 2 m 1/ 5/ R202 2 m 8262R220 2 m 1/ 7/ R208 2 m 8262R226 2 m 1/ 9/ R212 2 m 8262R230 2 m 1/ 9/ R078 2 m / 5/ P /8 1/ R115 3 m 8263R191 3 m 3/8 5/ R200 3 m 8263R193 3 m 3/8 7/ R12 3 m 8263R332 3 m 3/8 9/ R210 3 m 8263R333 3 m 3/8 5/ P /8 5/ P093 m /8 5/ P006 l /2 3/ P P /2 5/ P09 m /2 5/ P087 7 l 1/2 5/ P007 m / 5/ P088 7 l 3/ 3/ P095 7 m / 3/ P003 8 m / 3/ P P00 10 m / 1 1/ P m /2 1 1/ P m / P l eneral Service - Normally Open 1/8 3/ R155 ƒ 1 l 8262R168 ƒ 1 l 1/8 3/ R156 1 l 8262R169 1 l 1/8 3/ R128 1 l 8262R236 1 l 1/8 1/ R129 1 l 8262R237 1 l 1/ 3/ R161 ƒ 2 l 8262R199 ƒ 2 l 1/ 3/ R260 2 l 8262R130 2 l 1/ 3/ R261 2 l 8262R13 2 l 1/ 1/ R262 2 l 8262R138 2 l 1/ 5/ R263 2 l 8262R12 2 l 1/ 7/ R26 2 l 8262R18 2 l 1/ 9/ R265 2 l 8262R152 2 l 3/8 1/ R070 3 l 8263R080 3 l 3/8 5/ R071 3 l 8263R081 3 l 3/8 7/ R072 3 l 8263R082 3 l 3/8 9/ R073 3 l 8263R083 3 l 3/8 5/ P l /2 5/ P03 15 l / 3/ P l / 3/ P l m = Safety Shut-off Valve. l = eneral Purpose Valve

3 2/2 3/2 /2 SRS eneration 2-Way Specifications (Metric units) Operating Pressure ifferential (bar) Pipe Orifice Kv low Max. Max Agency Agency Wattage Size ia. (mm) actor (m 3 /h) Min. Air-nert as Water Light 300 SSU luid Temp. rass onst. Ref. UL Stainless Steel onst. Ref. UL A/ eneral Service - Normally losed 1/ R175 ƒ 1 l 1/ R099 ƒ 1 l / R277 1 m 8262R178 1 m 1/ R105 1 m 8262R17 1 m 1/ R077 1 m / R107 ƒ 2 l / R181 ƒ 2 l 1/ R109 2 m 8262R183 2 m 1/ R232 2 m 8262R185 2 m 1/ R202 2 m 8262R220 2 m 1/ R208 2 m 8262R226 2 m 1/ R212 2 m 8262R230 2 m 1/ R078 2 m / P / R115 3 m 8263R191 3 m 3/ R200 3 m 8263R193 3 m 3/ R12 3 m 8263R332 3 m 3/ R210 3 m 8263R333 3 m 3/ P / P093 m / P006 l / P P / P09 m / P087 7 l 1/ P007 m / P088 7 l 3/ P095 7 m / P003 8 m / P P00 10 m / P m / P m P l eneral Service - Normally Open 1/ R155 ƒ 1 l 8262R168 ƒ 1 l 1/ R156 1 l 8262R169 1 l 1/ R128 1 l 8262R236 1 l 1/ R129 1 l 8262R237 1 l 1/ R161 ƒ 2 l 8262R199 ƒ 2 l 1/ R260 2 l 8262R130 2 l 1/ R261 2 l 8262R13 2 l 1/ R262 2 l 8262R138 2 l 1/ R263 2 l 8262R12 2 l 1/ R26 2 l 8262R18 2 l 1/ R265 2 l 8262R152 2 l 3/ R070 3 l 8263R080 3 l 3/ R071 3 l 8263R081 3 l 3/ R072 3 l 8263R082 3 l 3/ R073 3 l 8263R083 3 l 3/ P l / P03 15 l / P l / P l m = Safety Shut-off Valve. l = eneral Purpose Valve LTRONALLY NAN 107

4 2/2 3/2 /2 SRS eneration 2-Way Optional eatures hart ase atalog Number Resilient Materials and Suffix Options Other Standard Rebuild Kit LTRONALLY NAN Pipe Size Orifice ia. rass Stainless Steel Ammonia Silicone ree ry Air NR LT NR KM 1/8 3/6 8262R099 ƒ 8262R175 ƒ - S l - - M W W 1/8 3/6 8262R155 ƒ 8262R168 ƒ - S l - - M W W 1/8 3/6 8262R R169 N S - l A V J N T M /8 3/ R R178 N S - l A V J N T - MS M /8 3/ R R236 N S - l A V J N T M /8 1/8 8262R R17 N S - l A V J N T - V MS M /8 1/8 8262R S - - l M /8 1/8 8262R R237 N S - l A V J N T - V - M / 3/6 8262R107 ƒ 8262R181 ƒ - S l - - M W W 1/ 3/6 8262R161 ƒ 8262R199 ƒ - S l - - M W W 1/ 3/6 8262R R130 N S - l A V J N T M / 3/ R R183 N S P l A V J N T - - MS M / 3/ R R13 N S - l A V J N T M / 1/8 8262R R18 N S P l A V J N T - - MS M / 1/8 8262R R138 N S - l A V J N T M / 5/ R R220 N S P l A V J N T - - MS M / 5/ R R12 N S - l A V J N T M / 7/ R R226 N S P l A V J N T - - MS M / 7/ R R18 N S - l A V J N T M / 9/ R R230 N S P l A V J N T - V MS M / 9/ R R152 N S - l A V J N T - V - M / 9/ R S - - l M / 5/ P l A /8 1/8 8263R R191 N S - l A V J N T - - MS M /8 1/8 8263R R080 N S - l A V J N T M /8 5/ R R193 N S - l A V J N T - - MS M /8 5/ R R081 N S - l A V J N T M /8 7/ R R332 N S - l A V J N T - - MS M /8 7/ R R082 N S - l A V J N T M /8 9/ R R333 N S - l A V J N T - - MS M /8 9/ R R083 N S - l A V J N T M /8 5/ P l /8 5/8 8210P l - V J N - - V MO M /8 5/8 8210P l - V J N - - V - M /8 5/8 8210P l - V J N MO M /2 3/8 8223P P l /2 5/8 8210P l - V J N - - V MO M /2 5/8 8210P l - V J N - - V - M /2 5/8-8210P l - V J N MO M /2 5/8 8210P l - V J N MO M / 5/8-8210P l - V J N MO M / 3/ 8210P l - V J N - - V MO M / 3/ 8030P l - V J N MO M / 3/ 8210P l - V J N - - V - M / 3/ 8030P l - V J N M / 3/ 8223P l P l - V J N MO / 1 1/8 8210P l - V J N MO /2 1 1/ 8210P l - V J N MO / 8210P l - V J N MO l = Standard. Other options may be available. All option combinations may not be available. Please consult your local ASO contact. Valve contains PT main disc; Pressure rating reduced by 25%; Pressure rating limited to 250 psi; Valve contains Nylon 11 piston. ƒ ast UR disc supplied as standard, limits min. ambient temp. to 32 (0 ). uel gas service only; Ambient Temp. -0 to 10, luid Temp. -0 to 167 ; as capacity for 8262R077 is 18,700 tu/hr, for 8262R078 53,500 tu/hr based on 1" W.. 2" W.. nlet Pressure, 1000 tu/cu.ft. or more, 0.6 Specific ravity as. N suffix only available for Stainless Steel constructions. 12-2V V A/, V A/. PM R Oxygen Service PT Urethane Vacuum Manual Operator Mounting racket rass Stainless Steel 108

5 2/2 3/2 /2 SRS eneration imensions: inches (mm) onst. Ref. 1 in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm [8].69 [18] MOUNTN OLS LOW onst. Ref. 1 ANPT OT NS.59 [15] MOUNTN OLS M5 TRA.25 [6.] MN. ULL TRA PT. 2 OLS OR MOUNTN. onst. Ref. 2 ANPT OT NS LTRONALLY NAN.3 [9].87 [22.2] MOUNTN OLS.87 [22.2] MOUNTN OLS onst. Ref. 3 LOW M5 TRA.30 [7.6] MN. ULL TRA PT. 2 OLS OR MOUNTN. onst. Ref., 7, 15, 16, 17 ANPT OT.57 [1].75 [19] MOUNTN OLS.81 [20.6] MOUNTN OLS LOW M5 TRA.2 [6] MN. ULL TRA PT. 2 OLS OR MOUNTN ANPT OT NS PORT 2 109

6 2/2 3/2 /2 SRS eneration imensions: inches (mm) onst. Ref. 5, 6, 9 onst. Ref. 8 LTRONALLY NAN onst. Ref. 10 onst. Ref. 11, 12 onst. Ref. 18 ANPT OT NS 110

7 ngineering nformation eneration lectronically nhanced Solenoids ( eneration) All Redat eneration solenoid valves are rated for continuous duty under the operating conditions outlined within this section. oil Operating Voltage Ranges All coils are designed for industrial operating voltages and can be used on the following voltage ranges: Voltage Range Minimum Voltage Maximum Voltage V/50 or 60z/ lectrical Specifications 2 Watt lectronic oils Type Maximum Ambient Temperature 10 Maximum ycle Rate Standard oil lass of nsulation 1 Operation/ Second Power onsumption The eneration solenoid power rating is 1.0 watt of power for 12-2V and 1.5 watts for 2-120V A/, and V A/ V/50 or 60z/ / only The coils with voltage ranges of and 2-99 have three lead wires, 2 inches long (2 red for power input, and one green lead for grounding where necessary). These two versions are not polarity sensitive. The coil with a voltage range of 12-2/ has 3 lead wires, one red, one black, and one green. This coil is polarity sensitive. The red lead is the positive, black is the negative, and green is the ground wire. This solenoid is also polarity protected. Reversing the polarity will not damage the coil, but the coil will not function until the correct polarity is applied. Note: The voltage range is also suitable for battery charging circuits designed around a 125/ nominal voltage range. Magnet wire - lass insulation Lead wire - UL and SA listed 600 volt leads, 6 strand, 18awg, P coated Overmold LP obbin-lp 85 NNRN

8 ngineering nformation eneration The advanced technology used in the eneration coil includes electronic circuitry which may limit the compatibility with certain control system components. The following issues need to be considered when specifying an output card or device to operate the eneration coil. An initial inrush current spike is drawn by the eneration coil. This inrush spike is 72 msec in duration, which is sufficient time for the core to reach the plugnut. The electrical requirement then drops to the holding value. nrush urrent: The power source, wiring, and output device used need to have surge ratings equal to or greater than the inrush current value (appropriate to the voltage range) specified in the table below. nrush urrent Rating oil Version Peak nrush urrent (Amps) 12-2/ /50-60z/ /50-60z/ 0.32 Maximum uration = 72 ms olding urrent: The power source, wiring, and output device used need to have continuous current ratings equal to or greater than the holding current value (appropriate to the voltage range) specified in the table below. The eneration coil is suitable for systems using supervisory currents that do not exceed the drop-out currents noted in the table below. Supervisory/Leakage urrent Rating oil Version rop-out urrent (ma) 12-2/ /50-60z/ /50-60z/ 7 mportant: Supervisory and leakage currents above the drop-out current listed with cause improper operation. onsult your local ASO Sales office for additional assistance. Solenoid nclosures The eneration solenoid coil is fully encapsulated using upont Zenite Liquid rystal Polymer resin (LP). Zenite (LP) is a thermoplastic polyester resin which exhibits several advantages over other thermoplastics. The advantages include excellent resistance to a wide range of organic solvents and automotive fluids*, resistance to impact, and long term retention of properties at continuous-use temperatures. *hemical resistance of Zenite LP may not be suitable for all applications. Zenite LP is not suitable for caustic solution. Please consult ASO for appropriate product solutions. Zenite is a registered Trademark of upont o. olding urrent Rating NNRN 86 oil Version 12-2/ 2-120/50-60z/ /50-60z/ nput Voltage Average olding urrent (Amps) Average olding Volt-Amps (VA) Supervisory/Leakage urrents: The leakage current is defined as a current that is supplied from an output device when the device is in its off or de-activated state. Redat eneration Solenoids are available as: eneral Purpose/Watertight ntended for indoor and outdoor use and provides protection classifications from NMA Types 1 through X. lass, ivision 2 for azardous Locations/Watertight Meets Types 1 through X and is UL listed and SA certified for lass, ivision 2, roups A,,, and and lass, ivision 2, roups and. Operating temperature code TA (120 ).

9 ngineering nformation eneration Valve Specifications Maximum Ambient Temperature The maximum ambient temperature is 10 (60 ). This limit is based on continuous energization with the maximum fluid temperatures as shown on each catalog page. Response Time Response time from fully closed to fully open or vice versa depends on valve size, operating mode, fluids, temperature, inlet pressure, and pressure drop. The response times for eneration are defined as: Small direct acting valves 10 to 60 msec Large direct acting valves 25 to 90 msec nternally pilot operated valves: - Small diaphragm types 20 to 100 msec - Large diaphragm types 80 to 150 msec - Small piston types 80 to 150 msec - Large piston types 105 to 200 msec Operation on liquids has relatively little effect on small direct acting valves, however, response times of large direct acting and internally piloted valves may be lengthened by 50% to 100%. Manual Operators Manual operators are provided to operate the valves manually when electric actuation is not provided. There are two basic types of manual operators, momentary and maintained. To determine which type of manual operator is available for your valves, please see the Optional eatures hart on the relevant valve catalog page. Once it is determined that the subject valve can accommodate a manual operator, the chart below will tell you the type of manual operator. The chart also references the relevant cutaway illustration. utaway llustrations Series Number onst. Ref. Manual Operator Suffix Manual Operator Type llustration Number MO Maintained , 7, 10, 11, 12 MO Maintained MS Maintained MS Maintained MS Maintained , 6 MO Maintained MO Momentary MS Maintained MO Momentary MS Maintained , 3, MO Maintained MO Maintained 5 87 NNRN

10 ngineering nformation eneration Valve Parts in ontact with luids Series ody Seals and iscs isc older ore uide Springs Shading oil 8030 rass NR Stainless Steel opper Stainless Steel NR Stainless Steel Silver rass NR Stainless Steel opper Stainless Steel PT, NR Stainless Steel Silver rass NR, PA, PT Stainless Steel opper Stainless Steel NR Stainless Steel Silver 8262P Stainless Steel UR Stainless Steel Silver 8262R Stainless Steel UR Stainless Steel Silver 8262R Stainless Steel UR Stainless Steel Silver 8262R Stainless Steel UR Stainless Steel Silver 8262R Stainless Steel UR Stainless Steel Silver 8262 rass NR Stainless Steel opper 8262R077 rass LT NR - - nconel opper 8262R078 rass LT NR - POM nconel opper Stainless Steel NR Stainless Steel Silver 8263 rass NR Stainless Steel opper Stainless Steel NR, KM - POM 302 Stainless Steel Silver 831 rass NR, KM - POM 302 Stainless Steel opper 8316 rass NR POM POM 302, 17-7P Stainless Steels opper 8317 rass NR, KM, R - POM 302, 17-7P Stainless Steels opper Stainless Steel NR POM POM 302 Stainless Steel Silver 8320 rass NR POM POM 302 Stainless Steel opper 8321 rass NR POM POM 302 Stainless Steel opper 83 rass NR POM POM 302, 17-7P Stainless Steels opper 835 rass NR, PA - POM 302 Stainless Steel opper Stainless Steel NR, PA - POM 302 Stainless Steel opper 8551 Anodized Aluminum NR, PA - POM 302 Stainless Steel opper Note: All core tubes are 305 stainless steel and all cores and plugnuts are 30 stainless steel. 8210P033, 8210P03, and 8210P035 with PA isc older NNRN 88