Technical Application Guide for UP-SHINE LED Tube Light UP-T86W600-R

Transcription

1 Technical Application Guide for UP-SHINE LED Tube Light UP-T86W6-R

2 Introduction Up-shine AL+PC LED Tube light adopts LM SMD LED with high brightness and slight light decay. Excellent cooling systemwith >.8mm thickness AL66 aluminum heatsink. Clear or frosted cover optional.v fire-rated PC cover, up to 95% light transmittance. Reliable LED driver with brandedhigh quality capacitor and IC solution ensures excellent working performance. Up to 7% energy saving compared to traditional tube Long lifetime of 4, hours 12 wide beam angle 6mm length CCT: K 4K 5K 57K No UV/IR light Environment friendly, without Mercury or any other hazardous substances Application notes IP2 for indoor use Professional electrician for installation only Switch off before installation Do not touch when in use Keep away from hot steam and corrosive gas Application Areas Suitable for commercial and residential applications like offices, supermarkets, shops, schools, hotels, restaurants, workshop, warehouse, homes etc. Certificates SAA

3 Product Information Technical Specifications Model Voltage Power Power Factor Lumen (±5%) Beam angle CCT Lifespan CRI Dimmable Dimension UP-T86W6-R AC1-24V 6W o K 4h 8 No L6*W28.5*H2.mm UP-T86W6-R AC1-24V 6W o 4K 4h 8 No L6*W28.5*H2.mm UP-T86W6-R AC1-24V 6W o 5K 4h 8 No L6*W28.5*H2.mm UP-T86W6-R AC1-24V 6W o 57K 4h 8 No L6*W28.5*H2.mm Driver data Sheet Driver data Non-dim Input rated Voltage Frequency Input Voltage AC1-24V 5/6HZ AC85-265V Efficiency 85% Total load Wattage 6W±.5W Power Factor.9 Rated input current Full load output Voltage Rated output current Output current range.7a DC64-7V 8mA 8mA±5% Power tolerance ±5% Current output tolerance ±5% Short circuit protection Over voltage protection Over temperature protection PASS PASS PASS Fixture Compatibility Rated Wattage Electrical Classification Ingress Protection Operating Temp Operating Humidity Storage Temp 6W Ⅱ IP2-2 o C~45 o C ~9% -2 o C~65 o C

4 Spectral Distribution K 4K.8 Max=8814 [1.=2] 2.9SDCM FK.8 Max=64 [1.=2] 6SDCM F4K x=.44 y= x=.798 y= K 57K Max=7857 [1.=2].92SDCM F5K.8 Max=5919 [1.=2] SDCM F57K.5.4. x=.25 y= x=.167 y= Photometric Diagram K 4K / MH=1m C/18 C9/27 Flux out: 5 lm.281ft 8.617, 24.66fc 1m 76, 265.5lx 6.562ft 54, 6.165fc 2m 2.19, 66.6lx 8.45ft cm 16.91ft 515.2cm / MH=1m C/18 C9/27 Flux out: 55.4 lm.281ft 7.979, 25.12fc 1m 85.89, 27.4lx 6.562ft 1.995, 6.281fc 2m 21.47, 67.6lx 9.9ft cm 18.8ft 55.99cm ft.9575, 4fc m 1.1, 29.5lx 25.6ft cm ft.8866, 91fc m 9.54,.5lx 27.12ft cm ft.586, 41fc 4m 5.797, 16.59lx.81ft 1.65cm ft.4987, 7fc 4m 5.68, 16.9lx 6.15ft cm - AVERAGE BEAM ANGLE(5%): DEG ft.447,.9865fc 42.27ft 5m.71, 1.62lx cm Height Eavg, Emax Angle: 18.6deg Diameter - AVERAGE BEAM ANGLE(5%): 1 DEG ft.192, fc 45.19ft 5m.46, 2lx cm Height Eavg, Emax Angle: 18.4deg Diameter 5K 57K / MH=1m C/18 C9/27 Flux out: 59. lm.281ft 8.548, 24.fc 1m 9, 26lx 6.562ft 7, 6.81fc 2m 2., 65.46lx 8.61ft 26.7cm 17.26ft cm / MH=1m C/18 C9/27 Flux out: 56.4 lm.281ft 9.8, 25.57fc 1m 96.96, 275.2lx 6.562ft 2.252, 6.9fc 2m 24.24, 68.81lx 8.68ft cm 17.7ft 529.1cm ft.9498, fc m 2, 29.9lx 25.89ft cm ft 1.1, 2.841fc m 1.77,.58lx 26.5ft 79.96cm AVERAGE BEAM ANGLE(5%): 121. DEG ft.542, 2fc 4.52ft 1.12ft.9.56, 98fc 4.7ft 4m 5.751, 16.6lx cm 24 4m 6.6, 17.2lx cm ft.419,.97fc 4.15ft ft.6, fc 4.41ft 5m.68, 1.47lx 115.5cm 5m.878, 11.1lx 12.27cm Height Eavg, Emax Angle: 11deg Diameter Height Eavg, Emax Angle: 14deg Diameter AVERAGE BEAM ANGLE(5%): 12 DEG

5 Polar Diagram Comparison -15 O +/-18 O 15 O -12 O 12 O -9 O 9 O O 18 6 O 24 - O O O AVERAGE BEAM ANGLE (5%): 12DEG C/18, 18.1 deg C/21, deg C6/24, 11 deg C9/27, 16.1 deg Driver lifetime & LED light decay rate Driver Lifetime LED Light Decay Rate 9 11%.4 Lifetime (hours) o C 75 o C 85 o C 95 o C 15 o C Capacitor Tc ( o C) % Luminous Flux 15% 1% 95% 9% 85% % 75% FLUX.1.5 U'V' 7% LifeTime (hours) Temperature The testing is operated at 25 C The lifetime of capacitor, minimum of 5, hours if operated at 15 C, will be doubled whenever the temperature drops 1 C The highest withstand temperature of IC, MOS could be 12 C The highest withstand temperature of LED junction temperature is 15 C Temperature ( o C) :59:47 2:2:4 21:5:4 21:8:4 22:11:4 22:44:4 2:17:4 :2:4 :56:4 1:29:4 2:2:4 2:5:4 :8:4 4:14:4 5:2:4 5:5:4 6:26:4 7:2:4 8:5:4 8:8:4 Time IC Capacitor MOS PCB Voltage transformer Environmental temperature The driver lifespan is based on capacitor working temperature.

6 Installation 1. One end power tube, installation with 1-24Vac 1-24Vac Disconnect the wire 1-24Vac Step 1 Step 2 Step 2. One end power tube,installation with Inductive Ballast Inductive Ballast Inductive Ballast 1-24Vac 1-24Vac Remove the fluorescent starter 1-24Vac Fluorescent starter Step 1 Step 2 Step. Two end power tube, installation with Disconnect the wire 1-24VAC 1-24VAC 1-24VAC Step 1 Step 2 Step 4. Two end power tube, installation with Inductive Ballast 1-24VAC Inductive Ballast 1-24VAC Remove the inductive ballast or not (In order to save more energy, plese remove ballast) 1-24VAC Connect the wire if the inductive ballast is removed Fluorescent starter Remove the Fluorescent starter Step 1 Step 2 Step Packaging Information SIZE(CM) N.W/pc (KGS) G.W.(KGS) Q'TY(PCS) Carton 69.*21* '' standard container 4'' standard container CTNS Q'TY(PCS) VOLUME(CBM) Phone: Add: 2nd building Dingfeng High-Tech Zone, Fuyuan 1st road, Fu Yong Sub-district, Bao'an, Shenzhen China