Technical Application Guide for UP-SHINE LED Downlight

Size: px

Start display at page:

Download "Technical Application Guide for UP-SHINE LED Downlight"

Percival Page
5 years ago
Views:

1 Technical Application Guide for UP-SHINE LED Downlight UP-DL22-3-1W

2 Introduction Up-shine COB downlight is unique designed with reflector and Citizen COB high power LED chip. ADC12 Aluminum profile provides excellent thermal dissipation. Short heatsink designed for any ceiling installations. Isolated driver solution both in dimmable and nondimmable version achieves great dimming compatibility with worldwide brand dimmers. Up to 7% energy saving compared to standard CFL Long lifetime of 4, hours Triac dim, -1V dim, DALI dim 6 wide beam angle 9-1mm cutout CCT: 27K 3K 4K 5K No UV/IR light Environment friendly, without Mercury or any other hazardous substances Application notes IP2/IP44 for indoor use only Professional electrician for installation only Switch off before installation Do not touch when in use Keep away from hot steam and corrosive gas Application Areas It is designed for general lighting applications in office, supermarket, shop, school, hotel, etc. It is also widely used for public areas, such as stairway, lobby, reception, corridors etc. Certificate info@upshine-lighting.com

3 Product Information Technical Specifications Model Voltage Power Power Factor Lumen (±5%) Beam angle CCT Lifespan CRI Dimmable Dimension UP-DL22-3-1W AC1-24V 1W o 27K 4h 8 No Ø11*5m cutout 9-1mm UP-DL22-3-1W AC1-24V 1W o 3K 4h 8 No Ø11*5m cutout 9-1mm UP-DL22-3-1W AC1-24V 1W o 4K 4h 8 No Ø11*5m cutout 9-1mm UP-DL22-3-1W AC1-24V 1W o 5K 4h 8 No Ø11*5m cutout 9-1mm UP-DL22-3-1WD AC23V 1W o 27K 4h 8 Yes Ø11*5m cutout 9-1mm UP-DL22-3-1WD AC23V 1W o 3K 4h 8 Yes Ø11*5m cutout 9-1mm UP-DL22-3-1WD AC23V 1W o 4K 4h 8 Yes Ø11*5m cutout 9-1mm UP-DL22-3-1WD AC23V 1W o 5K 4h 8 Yes Ø11*5m cutout 9-1mm Driver data Sheet Driver data DIM Non dim Input rated Voltage AC23V AC1-24V Frequency 5Hz 5/6Hz Input Voltage AC2-24V AC85-265V Efficiency 78% 86% Total load Wattage 1W±1W 1W±1W Power Factor.9.9 Rated input current 6A 2A Full load output Voltage DC35-38V DC35-38V Rated output current 215mA 2A Output current range 215mA±5% 2A±5% Power tolerance ±5% ±5% Current output tolerance ±5% ±5% Dimming range 8%-1% Dimmer Triac dimmers Short circuit protection PASS PASS Over voltage protection PASS PASS Over temperature protection PASS PASS Withstand voltage AC375V AC375V Fixture Compatibility Rated Wattage Electrical Classification Ingress Protection Operating Temp Operating Humidity Storage Temp 1W Ⅱ IP2/IP44-2 o C~45 o C ~9% -2 o C~65 o C info@upshine.com

4 Spectral Distribution 27K 3K Max=5338 [1.=2] 3.5SDCM F27K Max=7171 [1.=2] 2.12SDCM F3K x=464 y=49 x=841 y= K 5K Max=8694 [1.=2] 2.5SDCM F4K Max=7432 [1.=2] 4.91SDCM F5K x=473 y=564 x=473 y= Photometric Diagram 27K 3K MH=1m C/18 C9/27 Flux out: lm 3.281ft 41, 55.25fc 1m 436.1, 594.7lx 6.562ft 13, 13.81fc 2m 19., 148.7lx 3.857ft cm 7.741ft cm MH=1m C/18 C9/27 Flux out: lm 3.281ft 38.94, 54.37fc 1m 419.1, 585.2lx 6.562ft 9.735, 13.59fc 2m 14.8, 146.3lx 3.992ft cm 7.985ft cm , 6.139fc 48.45, 66.8lx 11.57ft cm , 6.41fc 46.57, 65.2lx 11.98ft 365.6cm , 3.453fc 27.25, 37.17lx 15.43ft 476cm , 3.398fc 26.2, 36.57lx 15.97ft cm AVERAGE BEAM ANGLE(5%): 6 DEG ft 1.621, 2.21fc 19.29ft 5m 17.44, 23.79lx cm Height Eavg, Emax Angle: 6.9deg Diameter AVERAGE BEAM ANGLE(5%): 61.7 DEG ft 1.568, 2.175fc 19.96ft 5m 16.77, 23.41lx 68.43cm Height Eavg, Emax Angle: 62.63deg Diameter 4K 5K MH=1m C/18 C9/27 Flux out: lm 3.281ft 42.4, 58.22fc 1m 452.5, 626.7lx 6.562ft 11, 14.56fc 2m 113.1, 148.7lx 3.946ft 128cm 7.892ft 246cm MH=1m C/18 C9/27 Flux out: lm 3.281ft 43.78, 72.66fc 1m 471.2, 782.1lx 6.562ft 1.94, 18.16fc 2m 117.8, 195.5lx 4.24ft cm 8.48ft cm , 6.469fc 58, 69.63lx 11.84ft 364cm , 8.73fc 52.36, 86.9lx 12.61ft cm , 3.639fc 28.28, 39.17lx 15.78ft cm , 4.541fc 29.45, 48.88lx 16.82ft cm AVERAGE BEAM ANGLE(5%): 6 DEG ft 1.682, 2.329fc 19.73ft 5m 18.1, 25.7lx 61.4cm Height Eavg, Emax Angle: 65deg Diameter AVERAGE BEAM ANGLE(5%): 61.7 DEG ft 1.751, 2.96fc 21.2ft 5m 18.85, 31.28lx 648cm Height Eavg, Emax Angle: 61.29deg Diameter info@upshine-lighting.com

Polar Diagram Comparison -15 O 18 O 15 O O 12 O O 9 O 17 34-6 O 51 6 O 68-3 O 85 3 O O AVERAGE BEAM ANGLE (5%): 58.

4 deg Driver lifetime & LED light decay rate Driver Lifetime LED Light Decay Rate 9 11% 4 Lifetime (hours) 8 7 6 5 4

FLUX 1 5 U'V' 7% 1 2 3 4 5 6 7 8 9 1 LifeTime (hours) Temperature The testing is operated at 25 C The lifetime of

withstand temperature of IC, MOS could be 12 C The highest withstand temperature of LED junction temperature is 15 C

13:13:1 13:25:1 13:37:1 13:49:1 14:1:1 14:13:1 14:25:1 14:37:1 14:49:1 15:1:1 15:13:1 15:25:1 15:37:1 15:49:1 16:1:1

5 Polar Diagram Comparison -15 O 18 O 15 O O 12 O O 9 O O 51 6 O 68-3 O 85 3 O O AVERAGE BEAM ANGLE (5%): 58.5DEG C/18, 57.6 deg C3/21, 58.5 deg C6/24, 58.2 deg C9/27, 58.4 deg Driver lifetime & LED light decay rate Driver Lifetime LED Light Decay Rate 9 11% 4 Lifetime (hours) o C 75 o C 85 o C 95 o C 15 o C Capacitor Tc ( o C) % Luminous Flux 15% 1% 95% 9% 85% % 75% FLUX 1 5 U'V' 7% LifeTime (hours) Temperature The testing is operated at 25 C The lifetime of capacitor, minimum of 5, hours if operated at 15 C, will be doubled whenever the temperature drops 1 C The highest withstand temperature of IC, MOS could be 12 C The highest withstand temperature of LED junction temperature is 15 C Temperature ( o C) :13:13 11:25:1 11:37:1 11:49:1 12:1:1 12:13:1 12:25:1 12:37:1 12:49:1 13:1:1 13:13:1 13:25:1 13:37:1 13:49:1 14:1:1 14:13:1 14:25:1 14:37:1 14:49:1 15:1:1 15:13:1 15:25:1 15:37:1 15:49:1 16:1:1 16:13:1 16:25:1 16:37:1 Time IC Capacitor MOS PCB LED Fitting Environmental temperature The driver lifespan is based on capacitor working temperature. info@upshine.com

6 Installation Building material above fitting Install requirements A-gap above the fitting B-gap to the building material C-gap to the thermal insulation 25mm 25mm 25mm Building material or thermal insulation B Building material Ceiling Opening Ø9-1mm Connect Power supply Spring Clips 1 2 A. Hold back spring clips Finish Spring Clips Ceiling B. Push downlight into position 3 4 Packaging Information SIZE(CM) N.W/pc (KGS) G.W.(KGS) Q'TY(PCS) Carton 39*28* '' standard container 4'' standard container CTNS Q'TY(PCS) VOLUME(CBM) info@upshine.com Phone: Add: 2nd building Dingfeng High-Tech Zone, Fuyuan 1st road, Fu Yong Sub-district, Bao'an, Shenzhen China

Technical Application Guide for UP-SHINE LED Downlight UP-DL W.

Technical Application Guide for UP-SHINE LED Downlight UP-DL44-3-1W Introduction DL44 downlight is structural designed with integration of heatsink and surface cover, aims at increasing the heat dissipation