Laboratory Certification For. Reno Geotech & Construction Material Testing Company
|
|
|
- Britney Tate
- 5 years ago
- Views:
Transcription
1 Laboratory Certification For Reno Geotech & Construction Material Testing Company Lab ID: LCP-011 Issue date: June 10 th, 2018 Expiry date: Dec 9 th, 2018 This letter confirms the completion of inspection and certification for Reno Geotech & Construction Materials Testing Lab, which is located at House# 15, street #6, Shama Square, Khoshal Khan, Kabul, Afghanistan. This laboratory should now be considered as Certified for a period of 6-months from the date of this letter. This laboratory should now be considered as certified for use by the US Army Corps of Engineers Transatlantic Afghanistan District (USACE TAA) and other clients, for all tests listed in Table 1 to Table 7, as attached to this letter. The following tests (ASTM D3080, ASTM D4791, and ASTM C1019) are not permitted under this period of Certification. This certification will be included with records that are maintained at the ABA and USACE TAA Headquarters in Bagram Airbase, Afghanistan. Retaining the certification will require yearly inspections by the ABA. This certification is also contingent upon the following conditions: A. Continued employment of the below individual while without his oversight, the laboratory will require recertification: a. Asadullah Salih Laboratory Manager; B. If the calibration certificates of equipments expire or become invalid as per the relevant standard; C. If the laboratory is moved to a new location, it will require recertification; and D. If the laboratory fails to comply by the approved lab quality management plan, safety standards, and other criteria set forth in the most up-to-date ABA lab certification manual, the lab certification may be suspended. For verification and good standing of this certification please check our online directory of laboratories at The inspection and certification process for the Reno adhered to procedures outlined by the Materials Testing Center (MTC), which is located at the Geotechnical and Structures Laboratory (GSL), U.S. Army Engineer Research and Development Center (ERDC) in Vicksburg, Mississippi, USA. The MTC is the USACE-authorized agency for certifying laboratories for use in quality control testing for USACE construction projects. To facilitate construction in Afghanistan, the USACE TAA has authorized the ABA to conduct laboratory certifications with strict adherence to MTC protocol. Qualifications of the authors for conducting these certifications include: 12 years of laboratory experience, 12 years of teaching classes on construction materials, and six years of teaching university-level construction classes. Certified to perform 95 tests, as shown on attached sheets and summarized as: Table 1: 19 Table 2: 4 Table 3: 19 Table 4: 25 Table 5: 19 Table 6: 7 Table 7: 2 Regards, Mowdood Popal President of Afghanistan Builders Association (ABA)
2 Reno Geotech & Construction Material Testing Company Certified Laboratory Tests Table 1. List of Soil Tests 1 ASTM C421 Standard Practice for Dry Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants 2 ASTM D422 Standard Test Method for Particle Size Analysis 3 ASTM D 698 Compaction Characteristics by Standard Effort 4 ASTM D854 Standard Test Method for Specific Gravity of Soil by Water Pycnometer 5 ASTM D1140 Material Finer than 75 mm (No. 200) Sieve 6 ASTM D1556 Density & Unit Weight by Sand Cone 7 ASTM D1557 Compaction Characteristics by Modified Effort 8 ASTM D1883 California Bearing Ratio (CBR) 9 ASTM D2166 Standard Test Method for Unconfined Compressive Strength of Cohesive Soils 10 ASTM D2216 Standard Test Methods for Laboratory Determination of Water Content of Soil and Rock by Mass 11 ASTM D2487 Standard Practice for Classification of Soils for Engineering Purpose 12 ASTM D2488 Standard Practice for Description of and Identification of Soils (Visual-Manual Procedure) 13 ASTM D3282 Standard Practice for Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purpose 14 ASTM D4220 Standard Practices for Preserving and Transporting Soil Samples 15 ASTM D4318 Liquid & Plastic Limits & Plasticity Index 16 ASTM D4643 Determination of Water Content of Soil by Microwave Oven 17 ASTM D4718 Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles 18 ASTM D6951 Standard Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications 19 AASHTO T224 Correction for Coarse Particles in the Soil Compaction Test ` Table 2. List of Advanced Soil Tests Non repetitive Static Plate Load Tests of Soils and Flexible Pavement 1 ASTM D1196 Components, for Use in Evaluation and Design of Airport and Highway Pavements 2 3 ASTM D2113 ASTM D1586 Standard Practice for Rock Core Drilling and Sampling of Rock for Site Investigation Penetration Test and Split-Barrel Sampling of Soils
3 4 ASTM D2435 Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading Table 3. List of Aggregate (Fine and Course) Tests 1 ASTM C29 Standard Test Method for Bulk Density (Unit Weight) and Voids in Aggregate 2 ASTM C70 Standard Test Method for Surface Moisture in Fine Aggregate by Oven 3 ATSM C88 Standard Test Method for Soundness of Aggregate by Use of Sodium Sulfate or Magnesium Sulfate 4 ASTM C117 Standard Test Method for Material Finer than 75 µm (No. 200) Sieve in Mineral Aggregate by Washing 5 ASTM C127 Standard Test Method for Relative Density (Specific Gravity )& Absorption in Coarse Aggregate Standard Test Method for Relative Density (Specific Gravity )& Absorption in ASTM C128 6 Fine Aggregate 7 ASTM C131 Los Angeles Abrasion Resistance on Small-Size Coarse Aggregate 8 ASTM C136 Sieve Analysis of Fine Aggregate and Fineness Modulus 9 ASTM C142 Standard Test Method for Clay Lumps and Friable Particles in Aggregate 10 ASTM C144 Standard Specification for Aggregate for Masonry Mortar 11 ASTM C404 Standard Specification for Aggregate for Masonry Grout 12 ASTM C535 Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine 13 ASTM C566 Standard Test Method for Total Evaporable Moisture Content of Aggregate by Sieve and Oven 14 ASTM C897 Standard Specification for Aggregate for Job-Mixed Portland Cement-Based Plaster Mix Design 15 ASTM D75 Standard Practice for Sampling Aggregate 16 ASTM D1241 Standard Specification for Materials for Soil-Aggregate Subbase, Base, and Surface Courses 17 ASTM D2419 Standard Test Method for Sand Equivalent Value of soil and Fine Aggregate 18 ASTM D4944 Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester 19 ASTM D5821 Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate
4 Table 4. List of Cement, Grout, Mortar, & Concrete Tests 1 ASTM C31 Making and Curing Test Specimens in the Field 2 ASTM C39 Compressive Strength of Cylindrical Specimens 3 ASTM C42 Obtaining and Testing Drilled Cores and Sewed Beams of Concrete 4 ASTM C109 Compressive Strength of Hydraulic Cement Mortars 5 ASTM C143 Slump of Hydraulic Cement Concrete 6 ASTM C172 Standard Practice for Sampling Freshly Mixed Concrete 7 ASTM C174 Measuring Thickness of Concrete Elements Using Drilled Concrete Cores 8 ASTM C185 Standard Test Method for Air Content of Hydraulic Cement Mortar 9 ASCTM C187 Standard Test Method for Amount of Water Required for Normal Consistency of Hydraulic Cement Paste 10 ASCTM C188 Standard Test Method for Density of Hydraulic Cement 11 ASCTM C191 Standard Test Method for Time Setting of Hydraulic Cement by Vicat Needle 12 ASTM C192 Making and Curing Test Specimens in Laboratory 13 ASTM C ASTM C270 REV A 15 ASTM C ASTM C451 Standard Test Methods for Air Content of Freshly Mixed Concrete by the Pressure Method Standard Specification for Mortar for Unit Masonry Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Center Point Load) Standard Test Method for Early Stiffening of Hydraulic Cement ( Paste Method) 17 ASTM C140 Block Compression Test (CMU) 18 ASTM C476 Standard Specification for Grout of Masonry 19 ASTM C617 Standard Practice for Capping Cylindrical Specimens 20 ASTM C642 Density, Absorption and Voids in Hardened Concrete 21 ASTM C778 Standard Specification for Standard Sand 22 ASTM C805 Standard Test Method for Rebound Number of Hardened Concrete 23 ASTM C926 REV A Standard Specification for Application of Portland Cement Based Plaster 24 ASTM C1064 Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete 25 ASTM C1437 Standard Test Method for Flow of Hydraulic Cement Mortar
5 Table 5. List of Asphalt Cement and Asphalt Concrete Tests 1 AASHTO T182 Coating and Stripping of Bitumen-Aggregate Mixtures 2 ASTM D5 Standard Test Method for Penetration of Bituminous Materials 3 ASTM D36 Standard Test Method for Softening Point of Bitumen (Ring-and Ball Apparatus) 4 ASTM D70 Standard Test Method for Density of Semi-Solid Bituminous Materials (Pycnometer Method) 5 ASTM D92 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester 6 ASTM D140 Sampling Bituminous Materials 7 ASTM D242 Standard Specification for Mineral Filler for Bituminous Paving Mixtures 8 ASTM D546 Standard Test Method for Sieve Analysis of Mineral Filler for Bituminous Paving Mixtures 9 ASTM D979 Sampling Bituminous Paving Mixtures 10 ASTM D2041 Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures 11 ASTM D2172 Standard Test Method for Quantitative Extraction of Bitumen from Bituminous Paving Mixtures 12 ASTM D2726 Standard Test Method for Bulk Specific Gravity and Density of Non- Absorptive Compacted Bituminous Mixtures 13 ASTM D3549 Standard Test Method for Thickness or Height of Compacted Bituminous Paving Mixture Specimens 14 ASTM D3665 Standard Practice for Random Sampling of Construction Materials 15 ASTM D113 Ductility of Bitumen 16 ASTM D5361 Standard Practice for Sampling Compacted Bituminous Mixtures for Laboratory Testing 17 ASTM D5444 Standard Test Method for Mechanical Size Analysis of Extracted Aggregate 18 ASTM D6926 Standard Practice for Preparation of Bituminous Specimens Using Marshall Apparatus 19 ASTM D6927 Standard Test Method Marshall Stability and Flow of Bituminous Mixtures
6 Table 6. List of Bricks, Stone, & CMU s Tests Standard Specification for Building Brick (Solid Masonry Unit Made From Clay 1 ASTM C62 or Shale) 2 ASTM C67 Sampling and Testing Brick and Structural Clay Tile 3 ASTM C90 Standard Specification for loadbearing Concrete Masonry Unit 4 ASTM C97 Standard Test Methods for Absorption and Bulk Specific Gravity of Dimension Stone 5 ASTM C140 Sampling and Testing Concrete Masonry and Related Units 6 ASTM C170 Compressive Strength of Dimension Stone 7 ASTM C1552 Capping CMU/Related Units/Masonry Prisms for Compression Testing Table 7. List of Steel Tests 1 AASHTO T285 Standard Method of Test for Bend Test for Bars for Concrete Reinforcement 2 ASTM A370 Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Bend)
Laboratory Certification For. Delta Afghan Technical Engineering Services (DATES)
Laboratory Certification For Delta Afghan Technical Engineering Services (DATES) Lab ID: LCP-026 Issue date: Jan 6 th, 2019 Expiry date: July 5 th, 2019 This letter confirms the completion of inspection
Laboratory Certification For. Build Afghanistan Engineering Services (BAES) Laboratory
Laboratory Certification For Build Afghanistan Engineering Services (BAES) Laboratory Lab ID: LCP-017 Issue date: Oct 5, 2016 Expiry date: April 4, 2017 This Extension letter confirms the completion of
Laboratory Certification For. National Engineering Services for Rehabilitation of Afghanistan (NESRA)
Laboratory Certification For National Engineering Services for Rehabilitation of Afghanistan (NESRA) Lab ID: LCP-004 Issue date: Feb 15 th, 2018 Expiry date: Aug 14 th, 2018 This extension letter confirms
STRATA Certified Laboratory Tests
STRATA Certified Laboratory Tests Table 1. List of Certified Soil Tests 1 ASTM D 422 Standard Test Method for Particle-Size Analysis of Soils 2 ASTM D 698-12 Standard Test Method for Compaction Characteristics
Standard Testing & Engineering, LLC
Standard Testing & Engineering, LLC dba Standard Testing & Engineering Company in Oklahoma City, Oklahoma, USA has demonstrated proficiency for the testing of construction materials and has conformed to
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. TEAM SERVICES, INC. 717 SE 6 th Street Des Moines, IA Jeff Roberts Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TEAM SERVICES, INC. 717 SE 6 th Street Des Moines, IA 50309 Jeff Roberts Phone: 515 282 8818 Valid To: April 30, 2019 Certificate Number: 0576.01 In recognition
Flood Testing Laboratories, Inc.
in Chicago, Illinois, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies established
Terracon Consultants, Inc.
in College Station, Texas, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 PROFESSIONAL SERVICE INDUSTRIES, INC. 3011 South Huson Street, Suite A Tacoma, WA 98409 Eric Allen Phone: 253 589 1804 Valid To: December 31, 2019 Certificate
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 GEOTECH ENGINEERING AND TESTING, INC. 17407 Highway 59 North Humble, TX 77396 Andrie Fruel, P.E. Phone: 713 699 4000 Valid To: December 31, 2019 Certificate
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TOLUNAY-WONG ENGINEERS, INC 10710 Sam Houston Parkway West, Suite 100 Houston, TX 77031 Patricia Hodgkins Phone: 504 202 7541 Valid To: February 29, 2020 Certificate
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 NORTHWEST GEOTECH, INC. d/b/a NORTHWEST TESTING, INC. 9120 SW Pioneer Court, Suite B Wilsonville, OR 97070 Thomas Ginsbach, P.E. Phone: 503 682 1880 Valid To:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. CARLSON TESTING, INC Hudson Avenue, NE Salem, OR James Hathaway, PE Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CARLSON TESTING, INC. 4060 Hudson Avenue, NE Salem, OR 97301 James Hathaway, PE Phone: 503 589 1252 Valid To: January 31, 2020 Certificate Number: 0258.03 In
Pennoni Associates, Inc.
in Bethlehem, Pennsylvania, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies
1997 UBC Standard Test method for compressive strength of masonry prisms
IAS Accreditation Number TL-196 Company Name Address 3310 Airport Way Long Beach, California 90806 Contact Name Steve Crumb Lab Manager Telephone (562) 426-3355 Effective Date of Scope April 20, 2017 Accreditation
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. QC LABORATORIES, INC Northwest Freeway Houston, TX Damon Dolat Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 QC LABORATORIES, INC. 10810 Northwest Freeway Houston, TX 77092 Damon Dolat Phone: 713 695 1133 Valid to: July 31, 2018 Certificate Number: 1127.01 In recognition
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 OTTO ROSENAU & ASSOCIATES, INC. 6747 Martin Luther King Jr. Way S. Seattle, WA 98118 Judi Rosenau-Payseno Phone: 206 725 4600 Valid To: February 28, 2019 Certificate
Accredited Laboratory
Accredited Laboratory A2LA has accredited PIONEER LABORATORY Doha, Qatar for technical competence in the field of Construction Materials Testing This laboratory is accredited in accordance with the recognized
IAS Accreditation Number Pacific Testing and Inspection, Inc. Address 2417, Harrison Avenue, Centralia, WA 98531
IAS Accreditation Number TL-779 Company Name Address 2417, Harrison Avenue, Centralia, WA 98531 Contact Name Tim A. Barney, President Telephone (360) 736-3922 Effective Date of Scope November 30, 2017
IAS Accreditation Number Materials Testing and Inspection 2791 South Victory View Way Boise, Idaho 83709
IAS Accreditation Number Company Name Inspection Address 2791 South Victory View Way Boise, Idaho 83709 Contact Name Elizabeth Brown, P.E. Corporate Quality Manager Telephone (208) 376-4748 Effective Date
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. HTS, INC. CONSULTANTS 416 Pickering Houston, TX Terry J. Jackson, P.E. Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 HTS, INC. CONSULTANTS 416 Pickering Houston, TX 77206 Terry J. Jackson, P.E. Phone: 713 692 8373 Valid To: October 31, 2018 Certificate Number: 0029.01 In recognition
Following are key codes & standards to remember for Civil Estimators to prepare the tender/bid proposal in correct manner.
CODES & STANDARDS FOR ON-SITE TESTING LABORATORY Following are key codes & standards to remember for Civil Estimators to prepare the tender/bid proposal in correct manner. Codes & Standards are published
PAVETEX Engineering, LLC
in El Paso, Texas, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies established
Accredited Laboratory
Accredited Laboratory A2LA has accredited Houston, TX for technical competence in the field of Construction Materials Testing This laboratory is accredited in accordance with the recognized International
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 PROFESSIONAL SERVICE INDUSTRIES, INC. PORTLAND, OREGON DIVISION 6032 N Cutter Circle, Suite #480 Portland, OR 97217 Joseph A. Morrissey, PE Phone: 503 289 1778
GeoTesting Express, Inc.
in Acton, Massachusetts, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies
FHWA-Central Federal Lands Highway Division
in Denver, Colorado, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies established
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 GORRONDONA ENGINEERING SERVICES, INC. 4641 Kennedy Commerce Drive Houston, TX 77032 Corey Ritter Phone: 281 469 3347 Valid To: August 31, 2020 Certificate Number:
Accredited Laboratory
Accredited Laboratory A2LA has accredited (FORMERLY KNOWN AS GORRONDONA & ASSOCIATES, INC.) Houston, TX for technical competence in the field of Geotechnical Testing This laboratory is accredited in accordance
United-Heider Inspection Group Goldencrest Drive, Suite 114, Moreno Valley, CA 92553, USA Martin Lowenthal, General Manager
IAS Accreditation Number Company Name Address Contact Name Telephone +1 (951) 697-4777 Effective Date of Scope August 28, 2017 Accreditation Standard ISO/IEC 17025:2005 CMT TL-699 22620 Goldencrest Drive,
LABORATORY INSPECTION INFORMATION REQUEST
LABORATORY INSPECTION INFORMATION REQUEST This information will assist in the processing of laboratory inspections. The inspection is a two-man day comprehensive review that includes review of the quality
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 GORRONDONA ENGINEERING SERVICES, INC. 4641 Kennedy Commerce Drive Houston, TX 77032 Corey Ritter Phone: 281 469 3347 Valid To: August 31, 2020 Certificate Number:
DEPARTMENT OF THE ARMY U.S. ARMY CORPS OF ENGINEERS AFGHANISTAN ENGINEER DISTRICT - SOUTH APO AE 09355
DEPARTMENT OF THE ARMY U.S. ARMY CORPS OF ENGINEERS AFGHANISTAN ENGINEER DISTRICT - SOUTH APO AE 09355 REPLY TO ATTENTION OF USACE-EC-TSB 1 June 2013 (Expiration: 2 June 2015) 2013 INSPECTION AND CERTIFICATION
Nelson Testing Laboratories
in Elmhurst, Illinois, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies
Wiss, Janney, Elstner Associates, Inc.
in Northbrook, Illinois, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies
Geotechnics, Inc. East Pittsburgh, Pennsylvania, USA
in East Pittsburgh, Pennsylvania, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation
PRI Asphalt Technologies, Inc.
in Tampa, Florida, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies established
Seattle Public Utilities Materials Laboratory
in Seattle, Washington, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies
FHWA-Western Federal Lands Highway Division
in Vancouver, Washington, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies
From: Samaniego, Eric E@DOT Date: Tue, Jul 1, 2014 at 8:38 AM Subject: FW: FW: City of Los Angeles 2014 QAP To: "ray.solomon@lacity.org" Cc: "Kumar,
Geotechnics, Inc. East Pittsburgh, Pennsylvania, USA
in East Pittsburgh, Pennsylvania, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation
DIVISION 2500 MISCELLANEOUS METHODS OF TEST
TABLE OF CONTENTS DIVISION 2500 MISCELLANEOUS METHODS OF TEST SECTION 2501 PART V... 2500-1 PAGE i SECTION 2501 PART V 2501.1 GENERAL In order to properly monitor materials on a project, follow all applicable
2501 PART V SECTION 2501 PART V
SECTION 2501 PART V 2501.1 GENERAL In order to properly monitor materials on a project, follow all applicable procedures as outlined in the KDOT Construction Manual, Part V. This includes, but is not limited
DIVISION 2500 MISCELLANEOUS METHODS OF TEST
TABLE OF CONTENTS DIVISION 2500 MISCELLANEOUS METHODS OF TEST SECTION 2501 PART V... 2500-1 PAGE i SECTION 2501 PART V 2501.1 GENERAL In order to properly monitor materials on a project, follow all applicable
Method of Test For In-Place Density of Treated and Untreated Soils and Aggregates
Rev. 04-12-17 Aggregates and Soils T102H T103G T104D T106B T107B T108C T111D T112F T115D T116A T200E T203G T206G T209C T210J T211J& T212J T224C T227I T228C T230D T235B Method of Test For In-Place Density
LIST OF DAC (17025) ACCREDITED TESTS CONSTRUCTION MATERIALS TESTING. Determination of sulphate content of soil and ground water testing
LIST OF DAC (17025) ACCREDITED TESTS CONSTRUCTION MATERIALS TESTING WATER: Material / Product Description Chemical Water Determination of ph Value 02 Chemical Water Determination of sulphate content of
CTL Engineering of Indiana, Inc.
in Indianapolis, Indiana, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies
Beyond Engineering & Testing, LLC.
in Round Rock, Texas, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies established
KANSAS DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION TO THE STANDARD SPECIFICATIONS, EDITION 2007
Sheet 1 of 6 KANSAS DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION TO THE STANDARD SPECIFICATIONS, EDITION 2007 Delete SECTION 2501 and replace with the following: SECTION 2501 PART V 2501.1 GENERAL In
Standard test method for organic impurities in fine aggregates for concrete. Standard test method for chemical analysis of hydraulic cement
IAS Accreditation Number TL-454 Company Name (QEL)- Foreign Branch Address Shed-9, Building-2189, Road-1529, Block 115 P.O. Box 50191 Hidd Kingdom of Bahrain Contact Name Sreekala Prabasankar, Technical
AESCO, Inc. Huntington Beach, California, USA
in Huntington Beach, California, USA has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation
(Please complete the application, print, sign and date. Mail to CMEC at 2779 Apopka Blvd, Ste 1, Apopka, FL 32703)
CMEC, Inc. LABORATORY ACCREDITATION APPLICATION STEP 1 LABORATORY INFORMATION BILLING INFORMATION: Laboratory: Mailing Address: City/State/Zip: Phone: Fax: Contact Person: Email Address: PHYSICAL INFORMATION:
(Please complete the application, print, sign and date. Mail to CMEC at 2779 Apopka Blvd, Ste 1, Apopka, FL 32703)
CMEC, Inc. LABORATORY ACCREDITATION APPLICATION STEP 1 LABORATORY INFORMATION BILLING INFORMATION: Laboratory: Mailing Address: City/State/Zip: Phone: Fax: Contact Person: Email Address: PHYSICAL INFORMATION:
Geotech Services, X-18, MIDC, Hingna, Nagpur, Maharashtra. Discipline Mechanical Testing Issue Date
Last Amended on 11.01.2014 Page 1 of 14 I. BUILDING MATERIALS 1. Soil / Rock Plate Load Test IS 1888 1982 (Reaffirmed-2007) Cyclic Plate Load Test IS 5249 1992 Clause 6 (Reaffirmed-2010) Load Test On In-Situ
KANSAS DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION TO THE STANDARD SPECIFICATIONS, 2015 EDITION
Sheet 1 of 6 KANSAS DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION TO THE STANDARD SPECIFICATIONS, 2015 EDITION Delete SECTION 2501 and replace with the following: SECTION 2501 PART V 2501.1 GENERAL In
LIST OF TESTING SERVICES
Soil 1 In-situ Density by Sand Replacement Method Using Large / Small Pouring Cylinder BS 1377 Part 9 2 In-place Density Test by Sand Cone Method ASTM D 1556 3 In-situ Density Test Using Nuclear Densitometer
Oklahoma DOT Central Laboratory Test List
Aggregate Count of Tests: 21 Aggregate Durability Index 00091 T210 AR Bulk Density and Voids 00086 T19 AR Clay Lumps and Friable Particles 00080 T112 AR OHDL9-OHDL38 Dust Coating of Cover Aggregates 00149
Discipline Mechanical Testing Issue Date Certificate Number T-1169 Valid Until Last Amended on
Last Amended on 08.06.2015 Page 1 of 8 I. MECHANICAL PROPERTIES OF MATERIALS 1. Reinforcing Bar Nominal mass of HSD rebar IS 1786: 2008 (RA 2013) 0.075 kg/m to 15 kg/m Tensile Test of HSD rebar 2. Strands
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION In terms of section 22(2) (b) of the Accreditation for Conformity Assessment, Calibration and Good Laboratory Practice Act, 2006 (Act 19 of 2006), read with sections 23(1),
JAZAN UNIVERSITY. CIVIL ENGINEERING DEPARTMENT Equipments and Devices of the Concrete Laboratory
JAZAN UNIVERSITY College of Engineering CIVIL ENGINEERING DEPARTMENT Equipments and Devices of the Concrete Laboratory The Equipment The Purpose To determination of compressive strength of samples Bricks,
GENERAL EQUIPMENT. 3 Electronic analytical balance (320gr capacity - 0,001gr readability)
1. Laboratory Equipment Every laboratory equipment has its own calibration certificate and is operatedmaintained according to its manual guide. The equipment of the laboratory is listed below. The laboratory
Index FM 5-472/NAVFAC MO 330/AFJMAN (I)
RETURN TO TOC FM 5-472/NAVFAC MO 330/AFJMAN 32-1221(I) Index A accelerators, 4-7 additive, 5-1, 5-2, 5-5, 5-6 admixtures, 4-2, 4-3, 4-7, 4-8, 4-9, 4-20 adsorption, 2-6, 2-7 aerial photographs, 2-28, 2-30,
QUALITY ASSURANCE PROGRAM
QUALITY ASSURANCE PROGRAM FOR CONSTRUCTION and CITY OF LAREDO JUNE 2005 2005 by Texas Department of Transportation (512) 506-5803 All Rights Reserved TABLE OF CONTENTS SECTION 1 - INTRODUCTION... 3 1.1
This annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation
This annex is valid from: 16-08-2017 to 01-08-2020 Replaces annex dated: 23-05-2016 Vlamoven 41 6826 TM Arnhem The Netherlands Location(s) where activities are performed under accreditation Head Office
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION In terms of section 22(2) (b) of the Accreditation for Conformity Assessment, Calibration and Good Laboratory Practice Act, 2006 (Act 19 of 2006), read with sections 23(1),
Radhey Testing & Consultants Pvt. Ltd., B-363, Kalindi Vihar, Agra, Uttar Pradesh. Discipline Mechanical Testing Issue Date
Last Amended on - Page 1 of 10 I. BUILDING MATERIALS 1. Aggregates (Coarse & Fine) Sieve Analysis IS 2386 (Part 1) 1963 (RA 2002) 4.75 mm to 100 mm 0.150 to 4.75 Specific Gravity IS 2386 (Part 3) 1963
SCHEDULE OF FEES 2016P PROFESSIONAL SERVICES Page 1 of 4
SCHEDULE OF FEES 2016P PROFESSIONAL SERVICES Page 1 of 4 PROFESSIONAL SERVICES Principal Engineer / Geologist $160.00 per hour Senior Engineer / Geologist $160.00 per hour Senior Environmental Scientist
Action Recommendation: Budget Impact:
City of Fayetteville Staff Review Form Matt Casey 1/30/2019 ENGINEERING (621) Submitted By 2019 0086 Legistar File ID 2/19/2019 City Council Meeting Date Agenda Item Only N/A for Non Agenda Item Submitted
This annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation
Annex to declaration accreditation (scope accreditation) Location(s) where activities are performed under accreditation Head Office Vlamoven 41 6826 TM Arnhem The Netherlands Location Abbreviation/ location
Special Provision No. 199S64 July 2016
GENERAL REQUIREMENTS FOR REFEREE TESTING Special Provision No. 199S64 July 2016 1.0 Scope This Special Provision describes the common requirements for referee testing related to laboratory and field testing
Standard Test Method for Bulk Density ( Unit Weight ) and Voids in Aggregate
IAS Accreditation Number Company Name Address TL-292 401 E. Fourth St., Bldg. 12B Bridgeport, PA 19405 Thomas Smith, Laboratory Manager Contact Name Telephone +1 (610) 313-3227 Effective Date of Scope
(DEPARTMENT OF CIVIL ENGINEERING)
CONSULTANCY & MATERIAL TESTING SERVICES (DEPARTMENT OF CIVIL ENGINEERING) VNR VIGNANA JYOTHI INSTITUTE OF ENGINEERING & TECHNOLOGY Bachupally, Nizampet( S.O.),Hyderabad -500 090 Phone: 040-23042758/59/60
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Prime Parkway Contact: Mr M Barham Prime Enterprise Park Tel: +44 (0)1332 383333 Derby Fax: +44 (0)1332 602607 DE1 3QB E-Mail: mike.barham@kiwa.co.uk
S.NO. APPARATUS NAME. Bitumen/Centrifuge Extractor - Hand Operated 1. 1.
CIVIL ENGINEERING DEPARTMENT INTEGRAL UNIVERSITY LUCKNOW TRANSPORTATION ENGINEERING LAB (ICE-552) Transportation has always played an essential role in the development of society, originally with regard
Department of Civil Engineering. Consultancy Experiments and Charges
Department of Civil Engineering Consultancy Experiments and Charges TRANSPORTATION ENGINEERING LABORATORY Rate Per Test (Rs.) S.N0. Test Name Proposed = Existing existing *1.5 1 CBR @ Field moisture Contents
PROGRAMME OF WORK : STANDARDS
Report : 09-0- Of 7 08 08/SC 0 470 (SABS 470) 4.0 Concrete poles for telephone, power and lighting purposes 08-08-0 508.0 Concrete retaining blocks 08-08-0 54 (SABS 54) 4.0 Concrete roofing tiles 08-08-0
NATIONAL INSTITUTE FOR CERTIFICATION IN ENGINEERING TECHNOLOGIES A division of the National Society of Professional Engineers
NATIONAL INSTITUTE FOR CERTIFICATION IN ENGINEERING TECHNOLOGIES A division of the National Society of Professional Engineers Transportation Engineering Technology HIGHWAY MATERIALS PROGRAM DETAIL MANUAL
Discipline Mechanical Testing Issue Date Certificate Number T-2522 Valid Until Last Amended on - Page 1 of 13
Bureau Veritas (India) Pvt. Ltd. - Construction Services, Last Amended on - Page 1 of 13 I. MECHANICAL PROPERTIES OF MATERIALS 1. Steel Reinforcement Weight/meter IS 1786: 2008 (RA 2013) 0.1 kg to 20 kg
SECTION AGGREGATES
SECTION 32 05 00 AGGREGATES PART 1 GENERAL 1.01 SUMMARY A. Section Includes: 1. Aggregate base 2. Engineered fill 3. Backfill 4. Fine filter aggregate (non-frost susceptible fill) 5. Riprap 6. Recreational
Glossary of Terms - A -
Glossary of Terms - A - AASHTO - American Association of State Highway and Transportation Officials. ABRASION - A test for determination of resistance of aggregate to abrasion conducted as per AASHTO Test
SECTION 904 AGGREGATES
SECTION 904 AGGREGATES 904.01 Aggregates. Aggregates shall consist of natural or manufactured materials produced from but not limited to limestone, dolomite, gravels, sandstones, steel furnace slag (SF),
Class 1 & 2 Road Base Material Supply Data Report
PAGE 1 of 4 Consulting Engineers Project Management Designers Unit 6, 9 Playle Street Myaree WA 6154 TEL 08 9317 3331 FAX 08 9317 3337 info@rsaeng.com.au www.rsaeng.com.au Class 1 & 2 Road Base Material
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION In terms of section 22(2) (b) of the Accreditation for Conformity Assessment, Calibration and Good Laboratory Practice Act, 2006 (Act 19 of 2006), read with sections 23(1),
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
chedule of Accreditation 2 Pine Trees, Chertsey Lane, taines-upon-thames, TW18 3HR, UK 5 Churchill Place Canary Wharf London E14 5HU Contact: Mr G P Booker Tel: +44 (0)20 38102416 Fax: +44 (0)20 7216 6950
CCIL BC/MB/NB/NL/SK Aggregate and Soil Proficiency Sample Program Please read the following instructions carefully BEFORE you start testing!
Please read the following instructions carefully BEFORE you start testing! Please report the results online using the reporting forms in your lab portal by Friday January 5, 2018. Results reported after
Effect of Adding Used-Foundry Sand on Hot Asphalt Mixtures Performance
Asphalt Mixtures Performance Dr. Hasan Hamodi Joni Building and Construction Engineering Department, University of Technology, Baghdad Email:Hassan_jony@yahoo.com Hussein Hamel Zghair Building and Construction
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service ccredited to Highways sset Planning Group Materials uilding G Merrow Lane Guildford Surrey GU4 7Q Contact: Mr J Tanzilli Tel: +44 (0)1483 517
OKLAHOMA DEPARTMENT OF TRANSPORTATION SPECIAL PROVISIONS FOR PLANT MIX BITUMINOUS BASES AND SURFACES
708-3(a-g) 99 OKLAHOMA DEPARTMENT OF TRANSPORTATION SPECIAL PROVISIONS FOR PLANT MIX BITUMINOUS BASES AND SURFACES These Special Provisions revise, amend and where in conflict, supersede applicable sections
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK shghal Centre for Research and Development ccredited to l Najma Street number
DEPARTMENT OF TRANSPORTATION STATE OF GEORGIA SPECIAL PROVISION. Section 815 Graded Aggregate
January 20, 2006 April 1, 2010 November 5, 2010 DEPARTMENT OF TRANSPORTATION STATE OF GEORGIA Delete Section 815 and substitute the following: 815.1 General Description SPECIAL PROVISION Section 815 Graded
Handbook for Concrete and Cement Table of Contents Issued 1 September 1997 (updated December 2002)
Handbook for Concrete and Cement Table of Contents Issued 1 September 1997 (updated December 2002) Standards and Specifications that are dual CRD-C and ASTM or ACI may be obtained from those organizations.
SPECIAL PROVISION FOR FURNISHING AND PLACING MARSHALL HMA MIXTURE (WITH SAMPLING BEHIND THE PAVER)
MICHIGAN DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION FOR FURNISHING AND PLACING MARSHALL HMA MIXTURE (WITH SAMPLING BEHIND THE PAVER) C&T:JWB 1 of 10 C&T APPR:KPK:CJB:08-02-06 FHWA:APPR:08-21-06 a.
SECTION ASPHALTIC CONCRETE PAVING
SECTION 02742 ASPHALTIC CONCRETE PAVING PART 1 GENERAL 1.1 SUMMARY A. Includes But Not Limited To 1. Prepare pavement sub-grade as described in Contract Documents to receive pavement base and paving. 2.
Publications Transmittal
Publications Transmittal Transmittal Number PT 17-032 Publication Title / Publication Number Materials Manual M 46-01.28 Originating Organization Materials Laboratory, Engineering and Regional Operations
Publications Transmittal
Publications Transmittal Transmittal Number PT 11-006 Publication Title / Publication Number Materials Manual M 46-01.07 Date Originating Organization Materials Laboratory through Administrative and Engineering
Evaluation of Warm Mix Asphalt Technologies
NTPEP Committee Work Plan for Evaluation of Warm Mix Asphalt Technologies NTPEP Designation: WMA-01-16 National Transportation Product Evaluation Program 444 North Capitol Street N.W., Suite 249 Washington,
32.02 RESPONSIBILITIES OF THE TESTING AGENCY
32.2 RESPONSIBILITIES OF THE TESTING AGENCY 32.2.1 General All materials and operations shall be tested in accordance with these Specifications and as directed by the Project Manager. Agencies testing
50 lbs (23 kg) of + #8 (+2.36 mm) material plus 50 lbs (23 kg) of pile run material.
5.5 REQUIRED SAMPLE SIZES 1. SCOPE This section covers the size of samples to be submitted to the s and Research Center for testing. The sample sizes listed are minimums and in special cases the Engineer