K12 Framing Board. Insula t i o n INSULATION FOR WOOD AND STEEL FRAMING SYSTEMS. Premium performance rigid thermoset insulation. R value of 16 on 2
|
|
- Matthew Nicholson
- 6 years ago
- Views:
Transcription
1 Insua t i o n First Issue Apri 2017 K12 INSULATION FOR WOOD AND STEEL FRAMING SYSTEMS Premium performance rigid thermoset insuation R vaue of 16 on 2 Higher R vaue per inch than any commony used insuation Negigibe smoke deveoped NFPA 285 compiant ASTM E 84 rating of 25/20 (fame-smoke) Cear cavity is maintained resists moisture penetration Low emissivity foi facings significanty increase the therma resistance of the cavity Unaffected by air infitration Easy to hande and insta Manufactured with a bowing agent that has zero ODP, ow GWP, HCFC and CFC free
2 Typica Constructions Introduction Kootherm K12 is a premium performance insuation, with a fiber free rigid thermoset phenoic insuation core faced on both sides with a ow emissivity composite foi facing which is used in wood or stee frame was. Insuated Sheathing Insuated Sheathing on Stee Frame Stee studwork Drywa Kootherm K12 Buiding Wrap Wa Tie Figure 1 Insuated Sheathing on Wood Frame Wood frame stud Buiding Wrap Drywa Wa ties with retaining cip Kootherm K12 Figure 2 Insuated Sheathing on Stee Frame Buiding Wrap Drywa Stee studwork Cement board Wa ties Kootherm K12 2 Figure 3
3 Wood Frame Wa with Stucco on Bockwork Insuation Between Wood Frame Studs with Insuated Drywa Wood Frame Wa with Ventiated Cadding Insuation Between Wood Frame Studs with Insuated Drywa OSB or pywood Kootherm K12 Wood stop batten Insuated Drywa Ventiated cadding e.g. wood or fiber cement cadding Insuated drywa Kootherm K12 GreenGuard Buiding Wrap GreenGuard Buiding Wrap Wood frame wa tie Bockwork with stucco finish OSB or pywood Figure 4 Figure 6 Insuation Between Wood Frame Studs and Insuated Sheathing Insuation Between Wood Frame Studs and Insuated Sheathing GreenGuard Buiding Wrap Wood stop batten Drywa Ventiated cadding e.g. wood or fiber cement cadding Drywa Kootherm K12 Kootherm K12 Buiding Wrap OSB or pywood Wa tie with retaining cip Bockwork with stucco finish Buiding Wrap on outside of with ventiated cadding systems OSB or pywood Figure 5 Figure 7 3
4 Typica Constructions Product Detais Renovation Interna Drywa Insuation Between, and Insuated Drywa Attached to, Wood Framework on Soid Brick Wa course Kootherm over wood framing with drywa covering Figure 8 Wood Frame Wa with Brickwork Insuation Between Wood Frame Studs with Insuated Drywa OSB or pywood Wood frame wa tie Figure 9 Insuation Between Wood Frame Studs and Insuated Sheathing Kootherm K12 Brickwork Kootherm K12 trimmed to fit between studs Insuated drywa Kootherm K12 Buiding Wrap Drywa The Facings Kootherm K12 is faced on both sides with a ow emissivity composite foi, adhesivey bonded to the insuation core during manufacture. This refective, ow emissivity surface improves the therma resistance of any unventiated cavity adjacent to the board. The Core The core of Kootherm K12 is a premium performance rigid thermoset fiber-free phenoic insuant manufactured with a bowing agent that has zero Ozone Depetion Potentia (ODP) and ow Goba Warming Potentia (GWP). Standard Dimensions Kootherm K12 is avaiabe in the foowing standard size(s): Nomina Dimension (in) Avaiabiity (mm) Width Length Insuant Thickness Refer to Insuation for current stock and non stock sizes. Standards and Approvas Kootherm K12 is manufactured to the highest standards under a management system certified to ISO 9001: 2008 (Quaity Management Systems. Requirements), ISO 14001: 2004 (Environmenta Management Systems. Requirements), and OSHAS 18001:2007 (Occupationa Heath & Safety Management Systems. Requirements). Durabiity If correcty instaed, Kootherm K12 can have an indefinite ife. Its durabiity depends on the supporting structure and the conditions of its use. Buiding Wrap OSB or pywood Wa tie with retaining cip Figure 10 4
5 Resistance to Sovents, Fungi & Pests The insuation core is resistant to short term contact with petro and with most diute acids, akais and minera ois. However, it is recommended that any spis be ceaned off fuy before the boards are instaed. Ensure that safe methods of ceaning are used, as recommended by the suppiers of the spied iquid. The insuation core is not resistant to some sovent based adhesive systems, particuary those containing methy ethy ketone. Adhesives containing such sovents shoud not be used in association with this product. Damaged boards or boards that have been in contact with harsh sovents or acids shoud not be used. The insuation core and facings used in the manufacture of Kootherm K12 resist attack by mod and microbia growth, and do not provide any food vaue to pests. Product Data Property Test Method Resut Nomina Thickness Standard Dimensions Width (in / mm) Length (in / mm) Compressive Strength, Min. (psi) Water Absorption, Max. (% by voume) Density, Min. (b/ft 3 ) Cosed Ce Content (% of ces cosed) Air Permeance (L/S/m 2) / (cfm/ft 2 ) Water Vapor Permeance, Max. 1 (perm) Genera ASTM C 209 ASTM C 272 ASTM C 1621 ASTM D 6226 ASTM E 2178 ASTM E 96 Made to Order / / / Permeance shown is for 25mm thick board. Permeance typicay decreases as board thickness increases. Fire Performance The rigid thermoset insuation core of Kootherm K12, when subjected to the ASTM E 84 (Standard Method for Surface Burning Characteristics of Buiding Materias) fire test specified in the tabe beow, has achieved the resut shown. Fame Spread Smoke Deveoped Further detais on the fire performance of Insuation products may be obtained from Insuation. Therma Resistance The R vaues detaied beow are quoted in accordance with ASTM C518 (Standard Test Method for Steady-State Therma Transmission Properties by Means of the Heat Fow Meter Apparatus). Therma resistance (R vaue) varies with thickness and is cacuated by dividing the thickness of the board by its therma conductivity. Insuant Thickness Therma Resistance (in) (mm) (R vaue) Refer to Insuation for current stock and non stock sizes. 5
6 Design Considerations Sitework Sustainabiity & Responsibiity Insuation has a ong term commitment to sustainabiity and responsibiity. A report covering the sustainabiity and responsibiity of Insuation Ltd s British operations is avaiabe at Specification Cause Kootherm K12 shoud be described in specifications as: The stud wa insuation sha be Kootherm K12 Framing Board mm thick: comprising a premium performance rigid thermoset insuation core faced on both sides with a ow emissivity composite foi facing. The product sha be manufactured: with a bowing agent that has zero Ozone Depetion Potentia (ODP) and ow Goba Warming Potentia (GWP); under a management system certified to BS / I.S. EN ISO 9001: 2008, BS / I.S. EN ISO 14001: 2004 and BS / I.S. OHSAS 18001: 2007; by Insuation Limited; and instaed in accordance with the instructions issued by them. Genera Cutting Cutting shoud be carried out either by using a fine toothed saw, or by scoring with a sharp knife, snapping the board over a straight edge and then cutting the facing on the other side. Ensure accurate trimming to achieve cose butting joints and continuity of insuation. Daiy Working Practice At the competion of each day s work, or whenever work is interrupted for extended periods of time, board edges and joints shoud be protected from incement weather. Avaiabiity Kootherm K12 is avaiabe through speciaist insuation distributors throughout the US. Packaging and Storage The poyethyene packaging of Insuation products, which is recycabe, shoud not be considered adequate for outdoor protection. Ideay, boards shoud be stored inside a buiding. If, however, outdoor storage cannot be avoided then the boards shoud be stacked cear of the ground and covered with an opaque poyethyene sheet or weatherproof tarp. Boards that have been aowed to get wet shoud not be used. Heath and Safety Insuation products are chemicay inert and safe to use. A Safety Data Sheet for this product is avaiabe from the Insuation website Pease note that the refective surfaces on this product are designed to enhance its therma performance. As such, they wi refect ight as we as heat, incuding utravioet ight. Therefore, if this product is being instaed during very bright or sunny weather, it is advisabe to wear UV protective sungasses or gogges, and if the skin is exposed for a significant period of time, to protect the bare skin with a UV bock sunscreen. The refective facings used on this product can be sippery when wet. Therefore, it is recommended that any excess materia shoud be contained to avoid a sip hazard. Warning do not stand on or otherwise support your weight on this product uness it is fuy supported by a oad bearing surface. Layer Staggered Joint Pattern Boards to be instaed horizontay (meaning 96 in horizonta orientation) 6
7 Insuation Company Detais Insuation LLC is part of the Group pc., one of Europe s eading construction product manufacturers. The Group was formed in the ate 1960s and is a pubicy traded group of companies headquartered in Kingscourt, County Cavan, Ireand. Insuation LLC, headquartered in Atanta, GA, is a eading manufacturer in energy efficiency and moisture management products, offering high performance insuation, buiding wraps and pre-insuated HVAC ductwork. Products & Appications Insuation LLC has a vast product range that incudes optimum, premium and high performance rigid insuation products and moisture management products. Insuation LLC products are suitabe for both new buid and renovation in a variety of appications within both residentia and non residentia buidings. Insuation for: Fat Roofs (XPS & VIP) Green Roofs (XPS & VIP) Cavity Was Soid Was Wood and Stee Framing Insuated Cadding Systems Insuated Render Systems Beow Grade Basement Was Foors Soffits Ductwork Further Soutions: Kootherm Cavity Coser Insuation Product Benefits Product Overview Vacuum Insuation Pane (VIP) With an aged R-vaue of 23.8 per inch, these products provide an insuating performance that is up to five times better than other commony avaiabe insuation materias. Provides high eves of therma efficiency with minima thickness. Over 90% (by weight) recycabe. Kootherm K range Products Higher R vaue per inch than any commony used insuation. Each product achieves the required fire performance for its intended appication. ASTM E 84 rating of 25/20 (fame/smoke). Manufactured with a bowing agent that has zero ODP, ow GWP, HCFC and CFC free. Range Products Rigid extruded poystyrene insuation (XPS) for use as genera purpose insuation for roofing, wa and foundation appications requiring a minimum compressive strength. R vaue of 5.0 per inch of thickness. Continuous Insuation (Ci) for above grade was, as we as beow grade was and foors. Provides an extra barrier against moisture infitration. Each product achieves the required fire performance for its intended appication. A Products Unaffected by air infitration a probem that can be experienced with minera fiber and which can reduce therma performance. Safe and easy to insta. If instaed correcty, can provide reiabe ong term therma performance over the ifetime of the buiding. KooDuct Pre Insuated Ducting Buiding Wraps 7
8 Contact Detais Saes and Technica Support Te Fax emai info@kingspaninsuation.us website Insuation LLC beieves the information and recommendations herein to be accurate and reiabe. However, since use conditions are not within its contro, Insuation LLC does not guarantee resuts from use of such products or other information herein and discaims a iabiity from any resuting damage or oss. No warranty, express or impied, is given as to the merchantabiity, fitness for particuar purpose, or otherwise with respect to the products referred to. For more information on specific buiding product recommendations and product data, contact your Insuation LLC representative. For the most current instaation guideines and compiance information go to Insuation LLC 2100 RiverEdge Parkway, Suite 175, Atanta, Georgia info@kingspaninsuation.us the G Device and the Lion Device are Registered Trademarks of the Group pc in the US, Canada and other countries. A rights reserved. GreenGuard, Kootherm and KooDuct and OPTIM-R are Registered Trademarks of the Group pc in the US. A rights reserved. BRO-K
K20 Concrete Sandwich Board
Insuation Third Revision November 2017 K20 Concrete Sandwich Board HIGH PERFORMANCE INSULATION FOR CONCRETE SANDWICH WALL SYSTEMS Premium performance rigid thermoset insuation R vaue of 17 on 2 in Higher
More informationK20 Concrete Sandwich Board
Insuation Fourth Revision June 2018 K20 Concrete Sandwich Board HIGH PERFORMANCE INSULATION FOR CONCRETE SANDWICH WALL SYSTEMS Premium performance rigid thermoset insuation R vaue of 17 on 2 in Higher
More informationK10 FM Soffit Board. Insulation INSULATION FOR STRUCTURAL CEILINGS (SOFFITS) Higher R value per inch than any commonly used insulation
Insuation First Revision March 2017 K10 FM Soffit Board INSULATION FOR STRUCTURAL CEILINGS (SOFFITS) Premium performance rigid thermoset insuation R vaue of 16.5 on 2 in Higher R vaue per inch than any
More informationK10 FM Soffit Board. Insulation INSULATION FOR STRUCTURAL CEILINGS (SOFFITS) Higher R value per inch than any commonly used insulation
Insuation Third Revision June 2018 K10 FM Soffit Board INSULATION FOR STRUCTURAL CEILINGS (SOFFITS) Premium performance rigid thermoset insuation R vaue of 16.5 on 2 in Higher R vaue per inch than any
More informationSingle Ply Roofing System
Insua t i o n Second Revision Juy 2018 Singe Py Roofing System NEXT GENERATION INSULATION SOLUTION FOR FLAT ROOFS Optimum performance rigid vacuum insuation pane Insuating performance up to five times
More informationInverted Roofing System
Insua t i o n First Issue September 2018 Roofing System NEXT GENERATION INSULATION SOLUTION FOR PROTECTED MEMBRANE FLAT ROOFS AND GREEN ROOFS Idea for constructions where a ack of construction depth or
More informationK15 Rainscreen Board. I nsulati on INSULATION FOR USE BEHIND RAINSCREEN FAÇADES. Low Energy Low Carbon Buildings
I nsuati on CI/SfB (21.9) Rn7 Tenth Issue M2 Juy 2017 K15 Rainscreen Board INSULATION FOR USE BEHIND RAINSCREEN FAÇADES Premium performance rigid thermoset phenoic insuation therma conductivity as ow as
More informationK8 Cavity Board. Insulation CAVITY WALL INSULATION
Insulation A4/6 K8 AW2194 Issue 13 Sep 2017 CAVITY WALL INSULATION Super high performance rigid thermoset phenolic insulation Fibre-free, closed cell insulation core Clear cavity is maintained resists
More informationK12 Framing Board. Insulation INSULATION FOR USE BEHIND WALL LINING AND FRAMED WALLS
Insulation A4/8 K12 AW2194 Issue 10 Sep 2017 INSULATION FOR USE BEHIND WALL LINING AND FRAMED WALLS Super high performance rigid thermoset phenolic insulation Fibre-free, closed cell insulation core Can
More informationK12 Framing Board. Insulation
Insulation A4/8 K12 AW2161 Issue 7 Dec 2016 INSULATION FOR USE BEHIND wall lining AND FRAMED WALLS Super high performance rigid thermoset phenolic insulation Fibre-free, closed cell insulation core Can
More informationTimber-framed Walls. Insulation
Insulation A4/6 TF AW2161 Issue 2 Jan 2017 Timber-framed Walls Insulation guide Super high performance solutions Fibre-free, closed cell insulation core Easy to handle and install Resistance to the passage
More informationK15 Rainscreen Board. Insulation INSULATION FOR USE BEHIND RAINSCREEN CLADDING SYSTEMS
Insulation A4/6 K15 AW2161 Issue 3 Dec 2016 INSULATION FOR USE BEHIND RAINSCREEN CLADDING SYSTEMS Super high performance rigid thermoset phenolic insulation Fibre-free, closed cell insulation core Suitable
More informationOffers excellent resistance to heat loss or gain, which saves energy and lowers operating costs. A low thermal conductivity of.23 at 75 F (24 C).
Submitta MSDS Guide Specifications Description Knauf 1000 Pipe Insuation is a moded, heavy-density, one-piece insuation made from inorganic gass fibers bonded with a thermosetting resin. It is produced
More informationK17 Insulated Plasterboard
Insulation A4/6 K17 AW2032 Issue 10 Nov 2015 K17 Insulated Plasterboard INSULATED DRY-LINING PLASTERBOARD FOR PLASTER DAuB / ADHESIVE BONDING Super high performance rigid thermoset phenolic insulation
More informationK18 Insulated Plasterboard
Insulation A4/8 K18 AW2203 Issue 11 Sep 2017 K18 Insulated INSULATED DRY-LINING PLASTERBOARD FOR MECHANICAL FIXING Super high performance rigid thermoset phenolic insulation Fibre-free, closed cell insulation
More informationK3 Floorboard. Insulation INSULATION FOR FLOORS
Insulation A4/6 K3 AW2194 Issue 6 Sep 2017 INSULATION FOR FLOORS K3 Floorboard Super high performance rigid thermoset phenolic insulation Fibre-free, closed cell insulation core Resistant to the passage
More informationK3 Floorboard. Insulation INSULATION FOR FLOORS
Insulation A4/6 K3 AW2385 Issue 7 Oct 2018 INSULATION FOR FLOORS K3 Floorboard Super high performance rigid thermoset phenolic insulation Fibre-free, closed cell insulation core Resistant to the passage
More informationThe width of single glazing. The warmth of double glazing.
Therma Insuation CI/SfB (31) Ro5 (M5) September 2011 The width of singe gazing. The warmth of doube gazing. Pikington Spacia Revoutionary vacuum gazing. Pikington Spacia Revoutionary vacuum gazing soution.
More informationK17 Insulated Plasterboard
Insulation A4/6 K17 AW2089 Issue 12 Mar 2016 K17 Insulated Plasterboard INSULATED DRY-LINING PLASTERBOARD FOR ADHESIVE BONDING Super high performance rigid thermoset phenolic insulation Fibre-free, closed
More informationAltro Seal standard, Altro Seal slip-resistant and Altro Seal vertical
Atro Sea standard, Atro Sea sip-resistant and Atro Sea vertica UV stabe poyurethane foor coating Nomina thickness 180 microns Technica and instaation data sheet September 2016 Product description FeRFA
More informationAltro Grip 6mm slip-resistant
Atro Grip 6mm sip-resistant Sovent-free, epoxy finish Technica and instaation data sheet September 2016 Product description FeRFA type 4 Atro Grip 6mm sip-resistant variant is a muti-ayer epoxy resin system
More informationAltro Tect standard, Altro Tect slip-resistant, Altro Tect vertical, Altro Tect fast-track,
Atro Tect standard, Atro Tect sip-resistant, Atro Tect vertica, Atro Tect fast-track, Sovent-Free epoxy coating Nomina thickness 400-500 microns Technica and instaation data sheet Juy 2017 Product description
More informationGypWall RAPID db Plus
Meta stud housing partition system! This section incudes updated information, added since it was first pubished in Juy 009. Pease see the WHITE BOOK update document for detais. Last updated /0/0 George
More informationAltro Mosaic standard matt, Altro Mosaic standard gloss, Altro Mosaic vertical matt and Altro Mosaic vertical gloss
Atro Mosaic standard matt, Atro Mosaic standard goss, Atro Mosaic vertica matt and Atro Mosaic vertica goss Muti-coour decorative foor finish system Nomina thickness 1-1.5mm Technica and instaation data
More informationBrick Veneer Walls. Insulation
Insulation A4/8 BV AW2157 Issue 7 Nov 2016 Brick Veneer Walls Insulation guide Helps achieve a 6-star house energy rating Rigid Kingspan Kooltherm and flexible Kingspan AIR-CELL solutions available Fibre-free,
More informationK10 FM Soffit Board. Insulation
Insulation A4/8 K10FM AW2257B Issue 14 Dec 2017 K10 FM Soffit Board Insulation for concrete soffits Super high performance rigid thermoset phenolic insulation Fibre-free, closed cell insulation core FM
More informationAltro Screed 3mm standard and Altro Screed 3mm
Atro Screed 3mm standard, Atro Screed 3mm sip-resistant Sovent-free, decorative, epoxy screed Technica and instaation data sheet September 2016 Product description FeRFA N/A Atro Screed 3mm standard and
More informationSoffit Board. Insulation
Insulation A4/8 K10+ AW2200 Issue 4 Sep 2017 K10 Soffit Board INSULATED FIBRE CEMENT SHEET for concrete soffits Super high performance rigid thermoset phenolic insulation Non combustible building board
More informationAltro Coat standard, Altro Coat slip-resistant,
Atro Coat standard, Atro Coat sip-resistant, Atro Coat vertica Water dispersed epoxy coating Nomina thickness 180 microns Technica and instaation data sheet September 2016 Product description FeRFA type
More informationK17 Insulated Plasterboard
Insulation A4/8 K17 AW2322 Issue 16 May 2018 K17 Insulated INSULATED DRY-LINING PLASTERBOARD FOR ADHESIVE BONDING Super high performance rigid thermoset phenolic insulation Fibre-free, closed cell insulation
More informationInsulation. Second Issue September See rear cover for applicable countries. Systems PRODUCT CATALOGUE. Low Energy Low Carbon Buildings
Insuation Second Issue September 2016 See rear cover for appicabe countries PRODUCT CATALOGUE Systems Low Energy Low Carbon Buidings Introduction Overview The heating, ventiation and air conditioning (HVAC)
More informationTechnical support and product training
Technica support The British Gypsum Drywa Academy provides a singe point of contact for queries on the appication and use of the Company s products and systems. An experienced technica team is on hand
More informationAltro Flow 1mm standard, Altro Flow 2mm standard and Altro Flow 3mm standard
Atro Fow 1mm standard, Atro Fow 2mm standard and Atro Fow 3mm standard January 2019 Sef-smoothing epoxy fooring Technica and instaation data sheet Product description FeRFA type 5 Atro Fow 1mm standard,
More informationAltro Screed 5mm Rapicure standard, Altro Screed 5mm Rapicure slip-resistant
Atro Screed 5mm Rapicure standard, Atro Screed 5mm Rapicure sip-resistant Sovent-free ow odour, rapid cure, epoxy screed Technica and instaation data sheet September 2016 Product description FeRFA 6 Atro
More informationK5 External Wall Board
Insulation A4/6 K5 AW2161 Issue 5 Dec 2016 INSULATION FOR USE BEHIND TRADITIONAL AND LIGHTWEIGHT POLYMER MODIFIED RENDERS Super high performance rigid thermoset phenolic insulation Fibre-free, closed cell
More informationK5 External Wall Board
Insulation A4/6 K5 AW2194 Issue 9 Apr 2017 INSULATION FOR USE BEHIND TRADITIONAL AND LIGHTWEIGHT POLYMER MODIFIED RENDERS Super high performance rigid thermoset phenolic insulation Fibre-free, closed cell
More informationThermasheath -3. Insulation for the Building Envelope ROOF WALL SPECIALTY
Insulation for the Building Envelope ROOF WALL SPECIALTY PRODUCT DESCRIPTION Rmax Thermasheath-3 is an energy-efficient thermal insulation board composed of a closed-cell polyisocyanurate (polyiso) foam
More informationAltro Flexiflow 2mm classic standard, Altro Flexiflow 2mm classic slip-resistant
Atro Fexifow 2mm cassic standard, Atro Fexifow 2mm cassic sip-resistant February 2018 PU sef-smoothing fexibe fooring Technica and instaation data sheet Product description FeRFA type 5 Atro Fexifow cassic
More informationAltro Screed 4mm standard, Altro Screed 4mm slip-resistant
Atro Screed 4mm standard, Atro Screed 4mm sip-resistant Sovent-free, decorative, epoxy screed Technica and instaation data sheet September 2016 Product description FeRFA 6 Atro Screed 4mm is a three-part
More informationProGUARD Guide Specification
ProGUARD Guide Specification MANUFACTURER Section: 072100 Insulating Sheathing T.Clear Corporation 3255 Symmes Rd. Hamilton, OH 45015 Phone: 800-544-7398 Phone: 513-870-9246 Fax: 513-870-9606 072113 Cementitious
More informationUniversal one coat DPM Nominal thickness 250 microns Technical and installation data sheet. Product description. Standard colours
Atro Proof standard Universa one coat DPM Nomina thickness 250 microns Technica and instaation data sheet October 2016 Product description Atro Proof standard variant is a singe coat, high-buid epoxy surface
More informationDouble Brick Cavity Walls
Insulation A4/6 DB AW1638 Issue 3 Feb 2014 Double Brick Cavity Walls Insulation guide Helps achieve a 6-star house energy rating Rigid Kingspan Kooltherm and flexible Kingspan AIR-CELL solutions available
More informationK12 Framing Board INSULATION FOR TIMBER AND STEEL FRAMING SYSTEMS P E R F O R M A N C E
CI/Sfb (21.9) Rn7 M2 Third Issue November 2002 K12 Framing Board INSULATION FOR TIMBER AND STEEL FRAMING SYSTEMS Premium performance rigid phenolic insulation thermal conductivity 0.018 W/m.K Class O fire
More informationK12 Framing Board INSULATION FOR TIMBER AND STEEL FRAMING SYSTEMS. P E R F O R M A N C E Manufactured to BS EN ISO 9002: 1994 Certificate No.
CI/Sfb (21.9) Rn7 M2 Fourth Issue March 2003 K12 Framing Board INSULATION FOR TIMBER AND STEEL FRAMING SYSTEMS Premium performance rigid phenolic insulation thermal conductivity 0.022 0.024 W/m.K Class
More informationEnergy Performance Certificate
3 Harequin Road Sieby LOUGHBOROUGH Leicestershire LE12 7UR Dweing type: Date of assessment: Date of certificate: Reference number: Tota foor area: Mid-terrace house 09 November 2007 09 November 2007 9547-1831-6293-0503-2641
More informationAltro Crete 2mm slip-resistant, Altro Crete 4mm slip-resistant (PTV 36)
Atro Crete 2mm sip-resistant, Atro Crete 4mm sip-resistant (PTV 36) January 2019 Sef-smoothing poyurethane fooring Technica and instaation data sheet Product description FeRFA type 4 Atro Crete 2mm sip-resistant
More informationK10 FM Soffit Board. Insulation INSULATION FOR STRUCTURAL CEILINGS (SOFFITS) Low Energy Low Carbon Buildings. agent that has zero ODP and low GWP
Insulation Second Issue October 2016 See rear cover for applicable countries K10 FM Soffit Board INSULATION FOR STRUCTURAL CEILINGS (SOFFITS) l Premium performance rigid thermoset insulation thermal conductivities
More informationAltro Flexiflow 8mm acoustic standard, Altro Flexiflow 8mm acoustic slip-resistant
Atro Fexifow 8mm acoustic standard, Atro Fexifow 8mm acoustic sip-resistant March 2018 Sef smoothing fexibe comfort fooring Technica and instaation data sheet Product description FeRFA type 5 Atro Fexifow
More informationACO Building + Landscape product guide. Domestic drainage & landscaping systems.
CHANNEL SLOT THRESHOLD LANDSCAPING SYSTEMS ACO Buiding + Landscape product guide. Domestic drainage & andscaping systems. www.aco.co.uk ATTENUATION & INFILTRATION Buiding + Landscape Products Channe Drainage
More informationCity of Cupertino Guidelines for Non-Residential Building Trash and Recycling Enclosures
City of Cupertino Guideines for Non-Residentia Buiding Trash and Recycing Encosures 1. SOLID WASTE REQUIREMENTS During the deveopment review process, prior to issuing grading, demoition, tenant improvement
More informationGritted anti-slip surface prevents slips, trips and falls in the workplace. Dura Grating. ...designed for the future
Heavy Duty Fibregass Foor Grating Gritted anti-sip surface prevents sips, trips and fas in the workpace Dura Grating...designed for the future Industria Rai Marine Landscaping Architectura Anti-sip fibregass
More informationNATIONAL ANNEX TO STANDARD. SFS-EN EUROCODE 5: DESIGN OF TIMBER STRUCTURS Part 1-1: Common rules and rules for buildings
ANNEX 16 NATIONAL ANNEX TO STANDARD SFS-EN 1995-1-1 EUROCODE 5: DESIGN OF TIMBER STRUCTURS Part 1-1: Common rues and rues for buidings Preface This Nationa Annex is used together with standard SFS-EN 1995-1-1:2004.
More informationwall TW50 zero ODP PARTIAL FILL CAVITY WALL INSULATION For more information on Kingspan Insulation visit
CI/Sfb (21.9) Rn7 M2 Second Issue November 2002 wall TW50 zero ODP PARTIAL FILL CAVITY WALL INSULATION High performance rigid urethane insulation thermal conductivity 0.022 W/m.K Utilises traditional cavity
More informationGold Bond BRAND Gypsum Sheathing
BRAND 09 06 29 16 00/NGC 43/NGC brand is a moisture-resistant sheathing installed on the outside of exterior framing as a substrate for exterior claddings. It is manufactured with a treated water-resistant
More informationHammer-Capsule Hammer-Capsule 57.1 Introduction Hammer Capsule Specifications Product Description
Hammer-Capsue 57.0 Hammer-Capsue 57.1 Introduction The Hammer-Capsue System consists of a sef contained, singe use, two-part gass capsue into which threaded anchor rod or reinforcing bars can be directy
More informationTAYLOR ROSE. Design Project Management Construction. The High Care Project Specialists
TAYLOR ROSE The High Care Project Speciaists Design Project Management Construction www.tayorroseuk.co.uk Contents Introduction What We Can Offer Services Civi & Structura Works Fooring & Drainage Mechanica
More informationTR26 LPC/FM. Insulation INSULATION FOR FLAT ROOFS WATERPROOFED WITH MECHANICALLY FIXED SINGLE PLY WATERPROOFING
Insulation A4/12 TR26 AW2260A Issue 1 Dec 2017 TR26 LPC/FM INSULATION FOR FLAT ROOFS WATERPROOFED WITH MECHANICALLY FIXED SINGLE PLY WATERPROOFING Super high performance rigid thermoset insulation LPCB
More informationInsulation. First Revison October DC14 Drainage Mat INSTALLATION GUIDE FOR RESIDENTIAL & COMMERCIAL APPLICATIONS
Insulation First Revison October 2016 DC14 Drainage Mat INSTALLATION GUIDE FOR RESIDENTIAL & COMMERCIAL APPLICATIONS 1. General Information This Guide describes the use of Kingspan GreenGuard DC14 Drainage
More informationTSX Insulation for Exposed Use ROOF WALL SPECIALTY
TSX-850 Insulation for Exposed Use ROOF WALL SPECIALTY PRODUCT DESCRIPTION Rmax TSX-850 is an energy-efficient thermal insulation board composed of a closed-cell polyisocyanurate (Polyiso) foam core bonded
More informationUniclass L68111:L35 CI/SfB EPIC F811:C21 (28.9) R (K3) Agrement Certificate No 90/2500. Promat MASTERBOARD. The Versatile Board
Unicass L68111:L35 CI/SfB EPIC F811:C21 (28.9) R (K3) Agrement Certificate No 90/2500 Promat MASTERBOARD The Versatie Board Promat MASTERBOARD Introduction Promat MASTERBOARD is a versatie Cass 0 buiding
More informationThermasheath-XP. Insulation for Exposed Use
Insulation for Exposed Use PRODUCT DESCRIPTION Rmax Thermasheath-XP is an energy-efficient thermal insulation board composed of a closed-cell polyisocyanurate (Polyiso) foam bonded to durable, embossed
More informationTechnical Data Sheet
Technical Data Sheet ProGUARD Concrete Insulated Sheathing Specifications & Installation Table Of Contents Product Description... pg. 1 Basic Use... pg. 1 Exterior Finishes... pg. 1 Standard Sizes... pg.
More informationChem-Stud Chem-Stud 56.1 Introduction Product Description Chem-Stud Capsule Specifications. Chem-Stud Recommended Setting Time
56.0 Chem-Stud 56.1 Introduction The Chem-Stud Anchor System consists of sef contained two-part gass capsues and matching chise pointed anchor rod which is instaed using a rotary hammer dri and rod adapters.
More informationCOMPOSITE FLOORS - II
24 COMPOSITE FLOORS - II 1.0 INTRODUCTION This chapter describes the basis for design of composite foors using profied deck sheets adopting the equations described in the chapter on composite foors - I
More informationGatic Vortex gives you control of drainage volume and speed.
Unicass Juy 2014 L731 CI/SfB (52.7) h Gatic Vortex gives you contro of drainage voume and speed. Speciaised Engineering. Specia Advice. Harness the power of Vortex Gatic Vortex has been deveoped to bring
More informationTR27 LPC/FM. Insulation
Insulation A4/12 TR27 AW2260B Issue 1 Dec 2017 TR27 LPC/FM INSULATION FOR FLAT ROOFS WATERPROOFED WITH FULLY ADHERED SINGLE PLY, PARTIALLY BONDED BUILT UP FELT, MASTIC ASPHALT AND COLD LIQUID APPLIED WATERPROOFING
More informationEco-Versal. insulation. Polyisocyanurate (PIR) foam core with aluminium foil composite to both sides BASELINE TOPLINE SLIMLINE
insulation Eco-Versal A universal solution for insulating pitched roofs, floors, walls, dormer cheeks & ceilings Eco-Versal 5 in 1 Eco-Versal 5 in 1 Polyisocyanurate (PIR) foam core with aluminium foil
More informationK12 Framing Board. I n s u l a t i o n. Low Energy Low Carbon Buildings
I n s u l a t i o n CI/Sfb (27.9) Rn7 M2 Ninth Issue March 2011 K12 INSULATION FOR TIMBER AND STEEL FRAMING SYSTEMS Premium performance rigid thermoset insulation thermal conductivities as low as 0.020
More informationSeptember 24, 2011 Page 1 PRODUCT DESCRIPTION PRODUCT FEATURES
September 24, 2011 Page 1 DESCRIPTION PRODUCT FEATURES Closed cell high density expanded polystyrene (HDEPS) insulation suitable for high load compressive strength applications. USES Geotechnical and other
More informationThermasheath -3. Insulation for the Building Envelope ROOF WALL SPECIALTY
Insulation for the Building Envelope ROOF WALL SPECIALTY PRODUCT DESCRIPTION Rmax Thermasheath-3 is an energy-efficient thermal insulation board composed of a closed-cell polyisocyanurate (polyiso) foam
More informationSoffit Board. Insulation INSULATION FOR STRUCTURAL CEILINGS (SOFFITS) Low Energy Low Carbon Buildings. CI/SfB. (45) Rn7 M2 Second Issue October 2016
Insulation CI/SfB (45) Rn7 M2 Second Issue October 2016 K110 Soffit Board INSULATION FOR STRUCTURAL CEILINGS (SOFFITS) l Premium performance rigid thermoset phenolic insulation thermal conductivity of
More informationUK Quality Ash Association....the power behind PFA
UK Quaity Ash Association...the power behind PFA The UK Quaity Ash Association Introduction The UK Quaity Ash Association (UKQAA) is a trade association representing the producers and users of PFA (puverised
More informationSoffit Board. Insulation INSULATION FOR STRUCTURAL CEILINGS (SOFFITS) Low Energy Low Carbon Buildings. CI/SfB. (45) Rn7 M2 Fifth Issue May 2018
Insulation CI/SfB (45) Rn7 M2 Fifth Issue May 2018 K10 Soffit Board INSULATION FOR STRUCTURAL CEILINGS (SOFFITS) l Premium performance rigid thermoset phenolic insulation thermal conductivities as low
More informationCertainTeed. Soffit and Vertical Siding
CertainTeed Soffit and Vertica Siding Tripe 3-1/3" InvisiVent has the highest ventiation performance of any viny soffit avaiabe today. TRIPLE 3-1/3" INVISIVENT AND SOLID S Siding: Cedar Impressions Doube
More informationAll rights falling outside the terms of the Creative Commons licence are retained or controlled by The
Energy in buidings About this free course This free course is an adapted extract from the Open University courses T212 Energy and sustainabiity www.open.ac.uk/courses/modues/t213 and T313 Renewabe energy
More informationK10 Soffit Board. I n s u l a t i o n. Low Energy Low Carbon Buildings
I n s u l a t i o n CI/Sfb (27.9) Rn7 M2 Eleventh Issue October 2011 K10 Soffit Board INSULATION FOR STRUCTURAL CEILINGS (SOFFITS) Premium performance rigid thermoset insulation thermal conductivities
More informationK15 Cladding Board. Insulation INSULATION FOR USE BEHIND CLADDING SYSTEMS. Low Energy Low Carbon Buildings. Third Issue July 2017
Insulation Third Issue July 2017 See rear cover for applicable countries K15 Cladding Board INSULATION FOR USE BEHIND CLADDING SYSTEMS l Premium performance rigid thermoset insulation thermal conductivities
More informationThermasheath -3. Insulation for the Building Envelope ROOF WALL SPECIALTY
Insulation for the Building Envelope ROOF WALL SPECIALTY PRODUCT DESCRIPTION Rmax Thermasheath-3 is an energy-efficient thermal insulation board composed of a closed-cell polyisocyanurate (polyiso) foam
More informationHEMPADUR MULTI-STRENGTH GF 35870
because prevention is better than cure Tough, tougher Product description is an amine cured pure epoxy coating reinforced with a high content of speciay seected amear gass fakes. The product provides exceent
More informationK110 Soffit Board. Insulation INSULATION FOR STRUCTURAL CEILINGS (SOFFITS) Low Energy Low Carbon Buildings. CI/SfB
Insulation CI/SfB (45) Rn7 M2 Second Issue October 2016 K110 Soffit Board INSULATION FOR STRUCTURAL CEILINGS (SOFFITS) l Premium performance rigid thermoset phenolic insulation thermal conductivity of
More informationwarmer homes making your home more comfortable and reducing energy bills
warmer homes incudes: ase studies of typica and hard-to-treat houses in Saithwaite & Marsden, West Yorkshire Guidance on deveoping a whoe house pan & much more! making your home more comfortabe and reducing
More informationK12 Framing Board. Insulation INSULATION FOR TIMBER AND STEEL FRAMING SYSTEMS P E R F O R M A N C E
Insulation CI/Sfb (27.9) Rn7 M2 Seventh Issue May 2007 K12 Framing Board INSULATION FOR TIMBER AND STEEL FRAMING SYSTEMS Premium performance rigid phenolic insulation thermal conductivity as low as 0.021
More informationK12 Framing Board. Insulation INSULATION FOR TIMBER AND STEEL FRAMING SYSTEMS P E R F O R M A N C E
Insulation CI/Sfb (27.9) Rn7 M2 Sixth Issue June 2006 K12 Framing Board INSULATION FOR TIMBER AND STEEL FRAMING SYSTEMS Premium performance rigid phenolic insulation thermal conductivity as low as 0.021
More informationRoutes to Compliance: Fire Safety
Insuation Sixth Issue September 2018 Routes to Compiance: Fire Safety FOR FAÇADES INCORPORATING KINGSPAN KOOLTHERM K15 RAINSCREEN BOARD ON BUILDINGS WITH A HABITABLE STOREY 18 M, OR GREATER, ABOVE GROUND
More informationK15 Rainscreen Board. I n s u l a t i o n EP E R F O R M A N C. Low Energy - Low Carbon Buildings
EP E R F O R M A N C I n s u l a t i o n CI/Sfb (21.9) Rn7 M2 Eighth Issue November 2008 K15 Rainscreen Board INSULATION FOR USE BEHIND RAINSCREEN CLADDING SYSTEMS Premium performance rigid phenolic insulation
More informationPlyLok. Product Guide PIR and Plywood Laminate Insulation for Warm Flat Roofs.
PlyLok Product Guide PIR and Plywood Laminate Insulation for Warm Flat Roofs. Introduction The Company. Driven by a culture of innovation, technical competence and flair, Recticel Insulation Products is
More informationTSX Insulation for Exposed Use ROOF WALL SPECIALTY
Insulation for Exposed Use ROOF WALL SPECIALTY PRODUCT DESCRIPTION Rmax TSX-8500 is an energy-efficient thermal insulation board composed of a closed-cell polyisocyanurate (Polyiso) foam core bonded to
More informationAugust 2008: Issue 1. Non - Residential New Build 4.5 Basements
Non - Residential New Build 4.5 Basements August 2008: Issue 1 Non-residential new build 4.0 Non-residential New Build Basements Contents Introduction find online page Solution optimiser and pathfinder
More informationK10 FM Soffit Board. I n s u l a t i o n. Low Energy Low Carbon Buildings
I n s u l a t i o n CI/Sfb (23.9) Rn7 M2 Twelfth Issue (b) June 2012 K10 FM Soffit Board INSULATION FOR STRUCTURAL CEILINGS (SOFFITS) Premium performance rigid thermoset insulation thermal conductivities
More informationSOAKWELL INFORMATION
www.pastube.com.au SOAKWELL INFORMATION This document gives detai s on the Pastube range of Soakwe products, incuding the physica characteristics. It aso describes simpe design measures for Pastube soakwes
More informationK8 Cavity Board. Insulation PARTIAL FILL CAVITY WALL INSULATION P E R F O R M A N C E BBA BRITISH
Insulation CI/Sfb (27.9) Rn7 M2 Eighth Issue May 2007 PARTIAL FILL CAVITY WALL INSULATION Premium performance rigid phenolic insulation thermal conductivity as low as 0.021 W/m.K Class 0 / Low Risk fire
More information1/2 in. (12.7 mm) and 5/8 in. (15.9 mm) glass mesh. It has an exceptionally hard, durable surface that can withstand prolonged exposure to moisture.
BRAND 09 29 28 00/NGC 1/2 in. (12.7 mm) and 5/8 in. (15.9 mm) brand is a rigid substrate made of Portland cement, aggregate and glass mesh. It has an exceptionally hard, durable surface that can withstand
More informationGA APPLICATION OF GYPSUM SHEATHING
1. Scope 1.1 This specification describes the minimum requirements for, and the methods of handling, storage, and application of, gypsum sheathing for use as a substrate for exterior claddings. 1.1.1 Exterior
More informationTW55. Insulation INSULATION FOR TIMBER AND STEEL FRAMING SYSTEMS
Insulation CI/Sfb (21.9) Rn7 M2 Fifth Issue May 2007 TW55 INSULATION FOR TIMBER AND STEEL FRAMING SYSTEMS High performance rigid urethane insulation thermal conductivity 0.023 W/m.K Can be used between
More informationK15 Rainscreen Board. Insulation INSULATION FOR USE BEHIND RAINSCREEN CLADDING SYSTEMS P E R F O R M A N C E
Insulation CI/Sfb (21.9) Rn7 M2 Sixth Issue June 2006 K15 Rainscreen Board INSULATION FOR USE BEHIND RAINSCREEN CLADDING SYSTEMS Premium performance rigid phenolic insulation thermal conductivity as low
More informationGREASE SEPARATORS INSTALLATION DIAGRAM 1 OILS AND GREASES SEDIMENTS
1. OILS AND GREASES: inet zone in which the turbuence of the inet fow is dampened and in which the substances with a specific weight ower than water (ois, foams, etc...) accumuate. 1 OILS AND GREASES 2.
More informationI-JOIST DESIGN GUIDE. I-Joist Products from KOTT NJ40U/AJS 24 NJ60U/AJS 25. LPI 20Plus NJ40H/AJS 150 NJ60H/AJS 20. l l l l l NJ60H/ AJS 20
I-JOIST DESIGN GUIDE THE MOST COST-EFFECTIVE FLOORS START WITH I-JOISTS FROM KOTT With our range of avaiabe I-Joist products, KOTT has you covered for a performance and price points. Our Design team wi
More informationJune Non - Residential Refurbishment 5.5 Basements
June 2010 Non - Residential Refurbishment 5.5 Basements Non-residential refurbishment 5.0 Non-residential Refurbishment Basements Contents Introduction find online page Solution optimiser and pathfinder
More information