Fascia Systems S. Old Peachtree Rd Norcross, GA (800) Copyright 2010, Innovative Metals Company, Inc.

Size: px

Start display at page:

Shanon Jones
6 years ago
Views:

Any Building In Any Place At Any Time Could Be Called Upon to Protect the Contents Within The turn of the century brought a rash of severe weather events and the promise of a dynamic climate that

Whether due to global warming or simply following cyclical trends, it seems clear that the frequency and severity of high-velocity wind events will continue to place demands on our structural

Some of the more notorious storms of the decade precipitated intensive study of the vulnerability of roofing systems by organizations such as the Roofing Industry Committee on Weather Issues (RICOWI)

2 Any Building In Any Place At Any Time Could Be Called Upon to Protect the Contents Within The turn of the century brought a rash of severe weather events and the promise of a dynamic climate that will continue to produce these natural assaults. Experts around the world agree that we are at the precipice of an extreme weather era. Whether due to global warming or simply following cyclical trends, it seems clear that the frequency and severity of high-velocity wind events will continue to place demands on our structural environment. Some of the more notorious storms of the decade precipitated intensive study of the vulnerability of roofing systems by organizations such as the Roofing Industry Committee on Weather Issues (RICOWI) and Factory Mutual Global (FM). These studies revealed that the vast majority of all weather-related losses (75%) were due to roof failures, and of those, more than half were due to perimeter failure. As a result, building codes and standards have evolved to demand better design and performance of roofing systems. The 2003 and subsequent editions of the International Building Code (IBC) contain provisions requiring edge-metal flashings (copings, fascia, gravel stop) to be designed and installed in accordance with ANSI/ SPRI ES-1, Wind Design Standard for Edge Systems Used with Low Slope Roof Systems Edge securement for low-slope roofs. Low-slope membrane roof system metal edge securement, except gutters, shall be designed and installed for wind loads in accordance with Chapter 16 and tested for resistance in accordance with ANSI/SPRI ES-1, except the basic wind speed shall be determined from Figure Although these studies and the adoption of the ES-1 standard by IBC are most directly attributable to the destruction inflicted by hurricanes, events such as straight-line winds and tornadic activity associated with common seasonal storms inflict widespread damage each year. FEMA has divided the United States into four zones that reflect the number and strength of extreme windstorms encountered in each region. The tables to the right clearly illustrate that no area is immune to wind-related roofing damage. R Copyright 2010, Innovative

That s Why We Bring You PerformaEdge A line of performance-inspired Edge Systems from IMETCO ES-1 Certification Edge Systems from IMETCO have successfully passed the three tests required by the

The membrane is pulled at a 45-degree angle to the roof deck to simulate a billowing.

RE-2: Pull-off Test for Metal Edge Flashing RE-2 evaluates the strength of the metal edge flashing to ensure that the fascia system meets or exceeds the building s calculated design wind pressure.

The results must meet or exceed the calculated design pressure of the building.

3 That s Why We Bring You PerformaEdge A line of performance-inspired Edge Systems from IMETCO ES-1 Certification Edge Systems from IMETCO have successfully passed the three tests required by the ANSI/SPRI ES-1 standard: 1. RE-1: Roof Edge Termination Test The RE-1 test evaluates the perimeter attachment to a minimum holding power of 100 pounds per foot. The membrane is pulled at a 45-degree angle to the roof deck to simulate a billowing. Failure occurs when the membrane detaches from the edge termination, or the termination detaches from its mounting. 2. RE-2: Pull-off Test for Metal Edge Flashing RE-2 evaluates the strength of the metal edge flashing to ensure that the fascia system meets or exceeds the building s calculated design wind pressure. An incremental load is applied to the face of the specimen and held for 60 seconds, then removed and increased in increments of 25 psf until 150 psf, then increments of 10 psf are applied thereafter. The results must meet or exceed the calculated design pressure of the building. Failure occurs with securement loss of any component of the roof edge, or deformation that would hinder weather protection at the edge. 3. RE-3: Pull-off Test for Metal Wall Coping RE-3 evaluates the strength of a metal coping cap to ensure that it meets or exceeds the building s calculated design wind pressure. Incremental loads are applied as with the RE-2 test, where the load is applied to the face and top simultaneously. Failure occurs with the securement loss of any component of the roof edge system, or deformation that would hinder weather protection at the edge. 3 Metals Company, Inc. (800)

ES-FX Series Fascia IMETCO s line of Edge Systems includes our strongest and most versatile fascia, the ES-FX.

From multi-ply built-up roofs to single ply systems to thicker modified bituminous membranes, the ES-FX fascia system can easily adjust to each one.

Engineered with its VariTight TM flashing component, ES-FX allows for installation with various roof membrane types and thicknesses without any penetration of the membrane.

The consistent and crisp lines of the extruded cover cannot be matched by a formed product.

4 ES-FX Series Fascia IMETCO s line of Edge Systems includes our strongest and most versatile fascia, the ES-FX. This extruded aluminum fascia is compatible with most of the roof systems marketed today. From multi-ply built-up roofs to single ply systems to thicker modified bituminous membranes, the ES-FX fascia system can easily adjust to each one. Face dimensions of the ES-FX fascia system provide coverage for up to three nailers. Engineered with its VariTight TM flashing component, ES-FX allows for installation with various roof membrane types and thicknesses without any penetration of the membrane. The VariTight TM screws supplied with the system allow for removal and replacement of the fascia cover in retrofit applications, helping to reduce costs and to expedite project completion. The consistent and crisp lines of the extruded cover cannot be matched by a formed product. 1" 2 1/2" SPECIFY 1 3/4" ES-FX Fascia FASCIA COVER x 10'-0" 6" CONCEALED SPLICE EACH JOINT 18"o.c. (by IMETCO) VARI-TIGHT FLASHING (by IMETCO) CANT DAM x 10'-0" MEMBRANE FLASHING (by OTHERS) 1 1/4" ROOFING 12" o.c. MAX. (by OTHERS) 1 1/4" ROOFING 18" o.c. MAX. (by OTHERS) ANSI/SPRI ES-1 approved Tested face dimensions up to 10 inches Engineered 3-piece design allows various roof membrane thicknesses 20-year Blow-Off / Leak-Tight warranty available 20-year finish warranty available 10-foot standard length 22-gauge galvanized steel cant dam Fascia fasteners included Concealed 6-inch splice plate Heavy gauge extruded aluminum cover Post-coated Kynar standard and custom colors Mill finish available Corners & accessories mitered and welded in factory Does not penetrate roof membrane Fully welded radii available Product: ES-FX600 ES-FX700 ES-FX775 ES-FX850 ES-FX925 ES-FX1000 Face Size: 6.0 inches 7.0 inches 7.75 inches 8.5 inches 9.25 inches 10.0 inches R Copyright 2010, Innovative

ES-F Series Fascia The old-school gravel stop and fascia of the past is no longer acceptable for most roof systems of today.

Once again, with its line of fully tested Edge Systems, IMETCO demonstrates its commitment to our customers by providing a full line of

SPECIFY 1/2" 1 1/2" ES-F Fascia FASCIA COVER x 10'-0" FASCIA CANT x 10'-0" 6" CONCEALED SPLICE PLATE @ EACH JOINT MEMBRANE FLASHING (by OTHERS) 1 1/4"

(by OTHERS) Features and Benefits: ANSI/SPRI ES-1 approved Tested face dimensions up to 9½ inches Two-piece design 10-foot standard lengths (other

roof membrane No exposed fasteners Installs securely with various membrane thicknesses 20-Year Blow-Off/Leak-Tight Warranty available 20-Year Finish

5 ES-F Series Fascia The old-school gravel stop and fascia of the past is no longer acceptable for most roof systems of today. Fascia systems must be tested and approved to meet the ANSI/SPRI ES-1 standard as required by the IBC. Once again, with its line of fully tested Edge Systems, IMETCO demonstrates its commitment to our customers by providing a full line of performance-inspired fascia and coping for use with built-up, single ply, and modified roofing systems. SPECIFY 1/2" 1 1/2" ES-F Fascia FASCIA COVER x 10'-0" FASCIA CANT x 10'-0" 6" CONCEALED SPLICE EACH JOINT MEMBRANE FLASHING (by OTHERS) 1 1/4" ROOFING 12" o.c. MAX. (by OTHERS) Features and Benefits: ANSI/SPRI ES-1 approved Tested face dimensions up to 9½ inches Two-piece design 10-foot standard lengths (other lengths available) 22-gauge galvanized steel cant dams Concealed 6-inch splice plate Factory fabricated corners and accessories Does not penetrate the roof membrane No exposed fasteners Installs securely with various membrane thicknesses 20-Year Blow-Off/Leak-Tight Warranty available 20-Year Finish Warranty available Materials and Coatings.040,.050 &.063 aluminum 24- and 22-gauge galvanized steel 24- and 22-gauge stainless steel Pre-finished Kynar coated aluminum & steel standard Post-coated Kynar custom colors available 1 3/4" 1/2" Product: ES-F500 ES-F650 ES-F800 ES-F /4" ROOFING 12" o.c. MAX. (by OTHERS) Face Size: 5.0 inches 6.5 inches 8.0 inches 9.5 inches Metals Company, Inc. 5 (800)

ES-C Series Coping Edge Systems from IMETCO are engineered for performance.

IMETCO tests our coping system based on the real-life ANSI/SPRI ES-1 method to meet or exceed your specific project requirements.

Features and Benefits: ANSI/SPRI ES-1 approved Tested wall widths up to 24 inches Tested face dimension up to 6 inches Snap on design 10-foot standard lengths (other

Single slope and peaked profiles Fully welded radii 20-Year Blow-Off/Leak-Tight Warranty available 20-Year Finish Warranty available Materials and Coatings.040,.050,.063,.

6 ES-C Series Coping Edge Systems from IMETCO are engineered for performance. A leader in highly engineered structural standing seam metal roofing, IMETCO understands the need for tested and secure metal Edge Systems. IMETCO tests our coping system based on the real-life ANSI/SPRI ES-1 method to meet or exceed your specific project requirements. That s why our ES-C Series Coping system is one of the strongest in the industry. Features and Benefits: ANSI/SPRI ES-1 approved Tested wall widths up to 24 inches Tested face dimension up to 6 inches Snap on design 10-foot standard lengths (other lengths available) Install on wood nailers, masonry or steel parapet walls Heavy-gauge galvanized steel anchor plates (5 o.c. standard placement) Anchor plate fasteners included Concealed 6-inch splice plate with butyl sealant tape Mitered & fully welded corners, end caps, transitions, etc. Single slope and peaked profiles Fully welded radii 20-Year Blow-Off/Leak-Tight Warranty available 20-Year Finish Warranty available Materials and Coatings.040,.050,.063,.080 &.125 aluminum 24- and 22-gauge galvanized steel 24- and 22-gauge stainless steel Pre-finished Kynar coated aluminum and steel standard Post-coated Kynar custom colors available "B" "B" 1 3/8" 1 3/4" 1/8" ES-C Sloped Coping COPING COVER x 10'-0" 6" CONCEALED SPLICE EACH JOINT ANCHOR 5'-0" o.c. "A" (ACTUAL WALL WIDTH) ES-C Peaked Coping "A" (ACTUAL WALL WIDTH) COPING COVER x 10'-0" (4) FASTENERS PER ANCHOR PLATE 3/4" 1/4" 6" CONCEALED SPLICE EACH JOINT ANCHOR 5'-0" o.c. (4) FASTENERS PER ANCHOR PLATE "C" CLEARANCE FOR WALL VARIATIONS 5/8" 3/4" "C" 1/8" CLEARANCE FOR WALL VARIATIONS R Copyright 2010, Innovative

EZ Edge Formed Line EZ Edge Sloped and Peaked Coping 5/8" 5/8" 5/8" IMETCO s EZ Edge line combines quality with economy.

For use with built-up, single-ply and modified roofing systems, all of the EZ Edge products are available with a 20- year Kynar

"B" "C" "B" "A" "A" (ACTUAL WALL WIDTH) 7/8" EZ Edge Formed Fascias and Extender 7/8" "C" Features and Benefits: Factory fabricated

available) Concealed 6-inch splice plates Factory-made corners, end caps, etc.

available Welded radius coping, fascia & gutter 20-Year Finish Warranty available 4" 4" SPECIFY 1 1/2" EQUAL 1 1/2" EQUAL 1 1/2" EZ

7 EZ Edge Formed Line EZ Edge Sloped and Peaked Coping 5/8" 5/8" 5/8" IMETCO s EZ Edge line combines quality with economy. These products offer proven reliability and pleasing aesthetics at a lower cost than performance-inspired edge systems. For use with built-up, single-ply and modified roofing systems, all of the EZ Edge products are available with a 20- year Kynar finish warranty. EZ-Edge fascia and coping is available with a weather-tight warranty up to 10 years. "B" "C" "B" "A" "A" (ACTUAL WALL WIDTH) 7/8" EZ Edge Formed Fascias and Extender 7/8" "C" Features and Benefits: Factory fabricated and field proven Standard & project-specific profiles & sizes Simple, strong design 10-foot standard lengths (other lengths available) Concealed 6-inch splice plates Factory-made corners, end caps, etc. Mitered and fully welded corners, end caps, transitions, etc. available Welded radius coping, fascia & gutter 20-Year Finish Warranty available 4" 4" SPECIFY 1 1/2" EQUAL 1 1/2" EQUAL 1 1/2" EZ Edge A and D Style Gutter, and Downspout Materials and Coatings.032,.040,.050,.063,.080 &.125 aluminum 24- and 22-gauge galvanized steel 24-gauge stainless steel Pre-finished Kynar coated aluminum and steel standard Post-painted Kynar custom colors available 1" 1" 1" 1" 1" 1" 2" 1" 7 Metals Company, Inc. (800)

IMETCO s 28 standard, designer and premium colors are all cool colors, with SR measurements of.25 or better. Custom colors and specialty finishes are also available.

Standard Collection Irish Mist Almond Suede Emerald Forest Blue Sapphire Tuscan Slate Epic Bronze Solar White Cadet Gray Sandstone Chestnut Georgian Brick Opal Star Colonial Red Silver Cloud

weather-tight performance Rigorously tested to be leakproof and to withstand hurricane-force winds Ideal for structural or architectural applications One-piece clip facilitates unlimited thermal

System Premium Collection Platinum Silver Roman Copper Brite Copper Champagne Preweathered Galvalume Galaxy Blue Signature Collection* Antiqu Bronze Artisan Steel IMETCO Series 300 standing seam

for Community Safe Rooms Single source warranty covers complete assembly Prestige Collection* AquaBlock Underlayment Acrylic Galvalume United Zinc: Glacier Gray United Zinc: Onyx Black TextureMatte

Heat tolerant (250+ f) Engineered for metal and tile roofing Self-adhering, self-sealing 100% SBS-modified 90-day exposure resistance The IMETCO Advantage For more than a decade, we at IMETCO have

Our staff comprises expertise in metal roofing, design, engineering, testing, code compliance, manufacturing, and more. Above all, our staff excels in providing unparalleled customer service.

Contact your IMETCO representative for more information. Galvalume is steel pre-treatment and a registered trademark of Biec International Inc.

8 IMETCO s 28 standard, designer and premium colors are all cool colors, with SR measurements of.25 or better. Custom colors and specialty finishes are also available. Ask your IMETCO representative for more information. Standard Collection Irish Mist Almond Suede Emerald Forest Blue Sapphire Tuscan Slate Epic Bronze Solar White Cadet Gray Sandstone Chestnut Georgian Brick Opal Star Colonial Red Silver Cloud Wedgewood Weathered Copper Designer Collection Iron Mountain Cardinal Red Carolina Coast Natural Patina Caribbean Coral Merlot The Total Solution IMETCO offers a full line of metal roofing, wall, and edge systems and accessories. Be sure to ask your representative for information about other products and solutions from IMETCO, such as: Series 300 Standing Seam Metal Roofing System Precision engineering for long-term weather-tight performance Rigorously tested to be leakproof and to withstand hurricane-force winds Ideal for structural or architectural applications One-piece clip facilitates unlimited thermal movement 2⅜-inch high symmetrical seam with a separate, easy-to-install seam cap Factory-applied hot-melt sealant that remains isolated from the clip Can be curved or tapered Total Metal Roof & Deck System Premium Collection Platinum Silver Roman Copper Brite Copper Champagne Preweathered Galvalume Galaxy Blue Signature Collection* Antiqu Bronze Artisan Steel IMETCO Series 300 standing seam metal roofing Martin Fireproofing Perform-A-Deck metal roof deck system Tested to resist extreme winds and impact from wind-born debris, as recommended by FEMA 361: Design and Construction Guidance for Community Safe Rooms Single source warranty covers complete assembly Prestige Collection* AquaBlock Underlayment Acrylic Galvalume United Zinc: Glacier Gray United Zinc: Onyx Black TextureMatte Stainless Steel Copper Copper Patina Field Stone Quartz The colors above are for reference only. To select your final color, please request a metal color sample. Heat tolerant (250+ f) Engineered for metal and tile roofing Self-adhering, self-sealing 100% SBS-modified 90-day exposure resistance The IMETCO Advantage For more than a decade, we at IMETCO have enjoyed our reputation as a manufacturer committed to providing products of only the highest quality. Our staff comprises expertise in metal roofing, design, engineering, testing, code compliance, manufacturing, and more. Above all, our staff excels in providing unparalleled customer service. At IMETCO, your satisfaction is our only measure of success! * Signature and Prestige Collections are available for select products. Special conditions may apply. Contact your IMETCO representative for more information. Galvalume is steel pre-treatment and a registered trademark of Biec International Inc. Hylar is a fluorocarbon paint finish available on our metal products, and is a registered trademark of Ausimont USA Inc. Kynar is a fluorocarbon paint finish available on our metal products, and is a registered trademark of Elf Atochem North America Inc. FM (Factory Mutual) is a world leader in property loss prevention and control engineering, research, and training. Its research-based recommendations set new standards that reduce the chance of property loss due to fire, weather conditions, and failure of electrical or mechanical equipment. It is a registered trademark of Factory Mutual Global, and must be identified as such whenever referred to in print. Series 300 and all other trademarks are owned by Innovative Metals Company, Inc. (IMETCO) S. Old Peachtree Rd Norcross, GA (p) s (f)

SECTION ROOF SPECIALTIES

SECTION ROOF SPECIALTIES PART 1 - GENERAL 1.1 DESCRIPTION SECTION 07 71 00 1. Use this section only for NCA projects. 2. Delete between // // if not applicable to project. Also delete any other item or paragraph not applicable