Training Courses on BioPAT MFCS/win 3.0, DoE and MVA turning science into solutions

Transcription

1 Training Courses on BioPAT MFCS/win 3.0, DoE and MVA 2013 turning science into solutions

2 Basic Course BioPAT MFCS/win 3.0 User Training Basic Course BioPAT MFCS/win 3.0 User Training This training is primarily directed towards persons starting with a new BioPAT MFCS/win system or using BioPAT MFCS/win for their daily work. The target of the training is to convey handling with the Batch-Management, Sample-Management, Plots and creation of fermentation documentation. Furthermore training for creation of calculations, profiles and using of recipes will be provided. The participants will have notebooks for hands on training. Introduction into SCADA-System BioPAT MFCS/win Shell, Service Control Program Data storing and Batch Management Process Visualization with Operator Service Program Off-line Data Management Evaluation by Plotting Reporting of Batches and Data export Configuration of Variables, Controllers and Calculations Update Configuration and Backup Copy Using S88 Recipes Help-Documentation Course duration 3 days March 2013 (German) 4 6 June 2013 (English) September 2013 (German) November 2013 (English) 1800 plus VAT Maximum of 8 trainees per training

3 This training is primarily directed towards administrators and experienced users of existing BioPAT MFCS/win systems. The focus of this advanced training is on extended functionality of the software, e. g. creation of event dependent processes by using the S88 recipe approach. Furthermore comprehensive configuration of the system including integration into network environments is provided. The participants will have notebooks for hands on training. Overview about BioPAT MFCS/win and its basic functions (Operator Service Program, Data Management, Configuration options) Configuration of Process Units and Control Units PID Control and Applications User Management, 21 CFR Part 11 and Audit Trail Configuration Reports Update Configuration and Backup Copy Maintenance, System Recovery and System Utilities Processes automation with S88 Recipes Installation and Uninstallation of MFCS/win Server Workstation MFCS/win Network Structure and Settings Security Settings Help-Documentation Course duration: 4 days 8 11 April 2013 (German) November 2013 (English) 2600 plus VAT Maximum of 6 trainees per training Advanced Course BioPAT MFCS/win 3.0 Manager Training Advanced Course BioPAT MFCS/win 3.0 Manager Training

4 Advanced Course BioPAT MFCS/win 3.0 Application Training Advanced Course BioPAT MFCS/win 3.0 Application Training This advanced training is primarily directed towards power users who want to create own control and feeding strategies inside BioPAT MFCS/win with recipes and calculations. The target of the training is focused on extended and individualized functionality of BioPAT MFCS/win, e. g. creation of event dependent processes by using the S88 recipe together with complex calculations in BioPAT MFCS/win. Integration, Differentiation MIN, MAX Determination Moving Average, Timers If then Else Structures OUR, CER, RQ Calculation Exponential Feed PID Controllers and MFCS PID Control po 2 Cascade Control (DO Control) PD Gravimetric Flow Control Fedbatch Fermentation with Gravimetric Flow Controllers Continuous Fermentation with Gravimetric Flow Controllers DO-Stat ph-stat k L a Determination of k L a Course duration: 3 days June 2013 (German) 3 5 December 2013 (English) 2600 plus VAT Maximum of 4 trainees per training

5 Basic Course MFCS/win 3.0 Crossflow This training is primarily directed towards persons starting with a new MFCS/win system or using MFCS/win for their daily work with Crossflow systems. The target of the training is to convey handling with the Batch-Management, Sample-Management, Plots and creation of filtration documentation. Furthermore training for creation of calculations, profiles and using of recipes will be provided. For practical exercises the participants will have training notebooks for direct use. Crossflow filtration, filtration parameters Transmembrane pressure, Reynolds number, yield Introduction into SCADA-System MFCS/win Shell, Service Control Program Data storing and batch management Process visualization with Operator Service Program Off-line data management Evaluation by plotting Reporting of batches and data export Configuration of variables, controllers and calculations DCU sequences for filtration processes Configuration of equipment phases Update configuration und backup copy Automatization of filtration processes with S88 recipes Basic Course MFCS/win 3.0 Crossflow Course duration: 3 days June 2013 (English) 1800 plus VAT Maximum of 8 participants per training

6 Basic Course MFCS DoE Nowadays, DoE is one of the most important techniques for systematic planning and execution as well as statistical evaluation and modeling of experiments. Advanced by the FDA initiative for Process Analytical Technologies (PAT), the implementation of DoE in the development and design phase of products and processes is frequently applied. Target of the training is to introduce DoE tools for your cost- and time-saving process optimization. Basic Course MFCS DoE Basics of Design of Experiment (DoE) methods Modde 9.1 and MFCS DoE module Discover optimal operation conditions: screening, optimization and robustness test Elimination of insignificant CPPs Efficient identification of the relationship between critical quality attributes (CQAs) and critical process parameters (CPPs) Objective statistical analysis Process optimization with DoE for Fermentation Cross flow applications Course duration: 2 days April 2013 (English) 1400 plus VAT Maximum of 8 trainees per training DoE Design of Experiments

7 Basic Course MFCS MVA In several cases, different critical process parameters (CPPs) are assumed to be independent of one another. Hence, processes are only analyzed in an univariant way. In fact, these parameters often influence one another and show a high correlation. Certain CPPs cannot be measured directly, but rather result from a combination of multiple parameters. To uncover these correlations, Multivariate Data Analysis (MVA) methods must be applied. Target of the training is to help you transform raw data into valuable information and make decisions quickly and confidently. Basics in advanced data analysis Principal Component Analysis (PCA) and Partial Least Square Regression (PLS) Simca-P 12 and MFCS MVA Module Batch Modelling and Evaluation for improved process understanding Basis for advanced process control Basic Course MFCS MVA Course duration: 2 days September 2013 (English) 1400 plus VAT Maximum of 8 participants per training

8 Basic Course DCU User Training Basic Course DCU User Training This training is primarily directed towards persons starting with a new DCU fermenter system or using DCU fermenter systems for their daily work. The target of the training is to convey handling with the Main-Operation, Calibration-Operation, Controller-Operation and other System-Operation. The participants will have notebooks for hands on training and also will have training with fermenter systems. Start-Menu Main Calibration (probes, flow, balances) Control Loops Parametrisation of Control loops Setpoint Profiles Gravimetric Dosing po 2 Cascade Control po 2 -Gasmix Controller, po 2 -Gasflow Ratio Controller, Oxygen Enrichment Phases (Sequences) Alarms User Management Trend Display Logbook Functionality System Management (Network, Manual Operation) Course duration: 2 days on demand 1400 plus VAT Maximum of 8 trainees per training

9

10 Organization and Information Services The participants will have notebooks for hands on training. Documents, refreshments and daily lunch included. Venue Sartorius College Otto-Brenner-Str Goettingen Hotel Accommodation On request, we will be happy to reserve your hotel accommodations. Transfer All courses start at 9 am. Transfer to training-site and back to the preferred hotel is included. Our shuttle service from the hotel starts at 8:45 am. Contact Kirsten Ludwig-Wiens Training Center Sartorius Stedim Biotech GmbH Goettingen, Germany Phone Fax kirsten.ludwig@sartorius-stedim.com NEW EXPAND Training and Seminar Catalog 2013 available! Cancellations must be in writing and received 20 working days prior to training courses and workshops. If a registered person cannot attend a course the full registration fee is due and payable, they may appoint a substitute to attend.

11 Registration Form Fax Basic Course MFCS/win 3.0 User Training Advanced Course MFCS/win 3.0 Manager Training Advanced Course MFCS/win 3.0 Application Training Basic Course MFCS/win 3.0 Crossflow Basic Course MFCS DoE Basic Course MFCS MVA Basic Course DCU User Training Secure yourself the new EXPAND Training and Seminar Catalog 2013! Please send me a copy of the EXPAND Training and Seminar Catalog Name First Name Title Company Department Company Address Phone Fax Hotel Accommodation Arrival Date Departure Date Non-smoking room preferred Date Signature

12 Sartorius Stedim Biotech GmbH August-Spindler-Strasse Goettingen, Germany Phone Fax Specifications subject to change without notice. Printed in Germany on paper that has been bleached without any use of chlorine. W Publication No.: ST-1009-e12094 Order No.: Ver