How to ensure the quality of ETICS?
|
|
- Christine Booth
- 5 years ago
- Views:
Transcription
1 How to ensure the quality of ETICS? Examples of what EAE members do to ensure durability and reliability of thermal insulation systems. QUALICHeCK workshop on 15 December 2016 Brussels, Belgium Ralf Pasker, Managing Director QUALICHeCK workshop Quality of ETICS Brussels/BE Ralf Pasker 1
2 External Thermal Insulation Composite Systems (ETICS) consist of 1. Adhesive 2. Thermal insulation material 3. Anchors 4. Base coat 5. Reinforcement, glass fibre or metal mesh 6. Finishing layer: finishing coat with a key coat (optional) and/or a decorative coat (optional) 7. Accessories, e.g. fabricated corner beads, connection and edge profiles, expansion joint profiles, base profiles, etc. The performance of ETICS depends on the choice of components, assessed by system holders. QUALICHeCK workshop Quality of ETICS Brussels/BE Ralf Pasker 2
3 Quality of ETICS Quality of the system Quality of planning Quality of components Quality of execution Quality of maintenance QUALICHeCK workshop Quality of ETICS Brussels/BE Ralf Pasker 3
4 System loyalty is essential Selection of components and consideration of their interaction is essential for long-term function and durability Georg Pommer, testing, inspection and certification body of City of Vienna/Austria This approach helps to avoid problems caused by building physics and to reduce the risk of failures early in the design stage Luc Dedeyne, architect, bcba BENERGIE Architectuur en Energie, Torhout/Belgium QUALICHeCK workshop Quality of ETICS Brussels/BE Ralf Pasker 4
5 The system is the construction product ETICS 2. kit means a construction product placed on the market by a single manufacturer as a set of at least two separate components that need to be put together to be incorporated in the construction works Article 2 of Regulation (EU) No 305/2011 of the European Parliament and of the Council (CPR) It shall be checked carefully on site if system components have been delivered by one system holder Comply with the configurations as foreseen by the system holder (e.g. see Declaration of Performance/ETA) Only then the performance and durability of an ETICS as given in the DoP (Declaration of Performance) can be guaranteed! Costly repairs or even total reconstruction of systems are often consequences of mixing individual system components from different suppliers. QUALICHeCK workshop Quality of ETICS Brussels/BE Ralf Pasker 5
6 Certificate of the applied kit EAE members recommend to fill a certificate of the applied ETICS. It indicates which system components have been finally installed on site; that these components comply with the system holders documentation for the intended use. It shall be signed by the installer after the assembly has been completed and should be handed over to the investor. German approvals already demand such documentation for many years now. QUALICHeCK workshop Quality of ETICS Brussels/BE Ralf Pasker 6
7 Quality of planning and design EAE s European Application Guideline for ETICS First European guidance paper taking care of design details, e.g. joints, fire barriers, etc. Meanwhile translated to different European languages. Considering specific requirements (legislation) of Member States. Used as basic document for trainings of planners, designers, and applicators. QUALICHeCK workshop Quality of ETICS Brussels/BE Ralf Pasker 7
8 Content Checklists, detail drawings, general advice Download: QUALICHeCK workshop Quality of ETICS Brussels/BE Ralf Pasker 8
9 Experience with EAE Application Guideline Significantly helped to improve the quality of works especially in developing markets. Sharing the experience of mature markets helps to prevent typical mistakes. Highly requested by new EAE members. Well recognized and translated in China and Japan (EAE liaison partner associations). Training and education are key to create reliable results together with system holders, designers, and applicators. QUALICHeCK workshop Quality of ETICS Brussels/BE Ralf Pasker 9
10 One step further: certification schemes in Member States Austria: Training scheme elaborated by Austrian ETICS association Qualitätsgruppe Wärmedämmsysteme, construction academies and WIEN-Zert. Basic document: Austrian Application Guideline. Duration of basic seminar: 40 h Refreshment seminar every 3 years. QUALICHeCK workshop Quality of ETICS Brussels/BE Ralf Pasker 10
11 One step further: certification schemes in Member States Germany: Quality group founded in 1996 by members of the German painters association. Basic principles: permanent training, third party controls of the construction works. Guidance document elaborated by quality circle, with participation of the German ETICS association Fachverband WDVS. Certified applicators may use the quality sign. QUALICHeCK workshop Quality of ETICS Brussels/BE Ralf Pasker 11
12 One step further: certification schemes in Member States Germany: Quality guidelines to ensure reliable quality of insulation products to be used in ETICS established by the German ETICS association Fachverband WDVS in collaboration with insulation products associations. Originally elaborated for EPS and MW, nowadays also available for PU. Others will follow. To be used for bilateral contracts between system holder and insulation manufacturer. Third-party inspections on voluntary base. To be adapted at EAE level (currently under discussion). QUALICHeCK workshop Quality of ETICS Brussels/BE Ralf Pasker 12
13 One step further: certification schemes in Member States Italy: Lectures about ETICS at Florence University. Webinars on specific topics attract hundreds of participants per year. Basic document: CORTEXA s Application Guideline. QUALICHeCK workshop Quality of ETICS Brussels/BE Ralf Pasker 13
14 Conclusions Common guidance papers for design and application useful to improve the knowledge about appropriate use of ETICS. Certification schemes for both applicators and system components may further support efforts. Finally, quality, performance, durability, and reliability of ETICS require a broad quality approach and joint efforts of industry, designers/architects and applicators. Efforts finally pay off: If applied correctly the life-cycle of an ETICS is regarded to be equal to rendered facades (approved by long-term field-tests; Fraunhofer IBP). Only if building owners trust in the long-term performance of External Thermal Insulation Composite Systems they will invest in energy efficient buildings envelopes. QUALICHeCK workshop Quality of ETICS Brussels/BE Ralf Pasker 14
15 ! Thank you for your attention! QUALICHeCK workshop Quality of ETICS Brussels/BE Ralf Pasker 15
16 The sole responsibility for the content of this presentation lies with the authors. It does not necessarily reflect the opinion of the European Union. Neither the EASME nor the European Commission are responsible for any use that may be made of the information contained therein.
System loyalty pays off!
European Association for External Thermal Insulation Composite Systems System loyalty pays off! Why respecting the system is essential for quality, safety and long-term performance of External Thermal
More informationHow to achieve quality of the works?
How to achieve quality of the works? Hans Erhorn Fraunhofer Institute for Building Physics QUALICHeCK Lyon workshop 17 January 2017 Fraunhofer IBP Fraunhofer IBP The trend towards Nearly Zero-Energy Buildings
More informationThe ETA for ETICS Basics of the technical assessment of ETICS with rendering. Matthias Hammerla R&D Knauf Group
Basics of the technical assessment of ETICS with rendering Matthias Hammerla R&D Knauf Group I. Overview on terms and definitions II. Basic information on ETAs a. General information b. Specific information
More informationThe European ETICS market - Do ETICS sufficiently contribute to meet political objectives?
The European ETICS market - Do ETICS sufficiently contribute to meet political objectives? Ralf Pasker EAE Managing Director 4 th European ETICS-Forum 5 th October 2017 Warsaw/POLAND 4 th European ETICS-Forum
More informationSource book on EPC compliance
Source book on EPC compliance Overall approach François DURIER IEE/13/610/SIO2.675574 01/03/2014-28/02/2017 QUALICHeCK documentation Source book for improved compliance of Energy Performance Certificates
More informationExternal Thermal Insulation Composite Systems (ETICS) for Sustainable Buildings: Performance, Standardisation and Quality
External Thermal Insulation Composite Systems (ETICS) for Sustainable Buildings: Performance, Standardisation and Quality Dr. Helge Kramberger, RMI, Germany 02/2011 1 ETICS for Sustainable Buildings External
More informationVOLUNTARY CONTROL SCHEME DEVELOPED BY THE PROVINCE OF SALZBURG: BUILDING SERVICES SYSTEMS DECLARATION BASED ON AS- BUILT CHARACTERISTICS
fact sheet #34 2016.12 Author Susanne Geissler (OEGNB) Technology Building services systems Renewable energy technologies Aspect Compliance frameworks Country Austria VOLUNTARY CONTROL SCHEME DEVELOPED
More informationQUALICHECK STUDY AUSTRIA - ASSESSMENT OF EPC INPUT DATA BASED ON RECALCULATION AND ON-SITE VALIDATION
Authors Susanne Geissler, Peter Wallisch (OEGNB) Lukas Maul (University of Applied Sciences Technikum Wien) fact sheet #12 2016.6 Technology All technologies Aspect Status on the ground Country Austria
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 13499:2003 Thermal insulation products for buildings - External thermal insulation composite systems (ETICS) based on expanded polystyrene - Specification Thermal insulation products
More informationOverview on the implementation of EPC databases in EU 28: status quo and future needs with regard to effective compliance and control
QUALICHeCk Webinar 5 th July 2016 Overview on the implementation of EPC databases in EU 28: status quo and future needs with regard to effective compliance and control Aleksandra Arcipowska Project Manager
More informationGuidance from the Group of Notified Bodies for the Construction Products Directive 89/106/EEC. unsupported systems" systems
GNB-CPD SG05 Guidance from the Group of Notified Bodies for the Construction Products Directive 89/106/EEC NB-CPD/SG05/03/007 Issued: November2003 APPROVED SG05 GUIDANCE GNB-CPD position paper from SG05
More informationQuality of the works Good practices and guidance
Quality of the works Good practices and guidance Hans Erhorn, Fraunhofer Institute for Building Physics QUALICHeCK Webinar Overview of main QUALICHeCK results and insights 28 February 2017 German Building
More informationQuality certification frameworks for Energy Efficiency services to scale up responsible investment in the building sector
Quality certification frameworks for Energy Efficiency services to scale up responsible investment in the building sector Project Coordinator: Stefan Amann This project receives funding from the European
More informationConstruction Products Regulations Curtain walling. Stephen Ledbetter, CWCT
Construction Products Regulations Curtain walling Stephen Ledbetter, CWCT Construction Products Regulations What they are? Harmonised product standard CE marking Performance characteristics Impacts on
More informationDECLARATION OF PERFORMANCE
DECLARATION OF PERFORMANCE DoP: 0112 for fischer termoz CN 8 / fischer termoz CN 8 R / fischer termoz CNplus 8 (Plastic anchors for use in concrete and masonry ) EN 1. Unique identification code of the
More informationClean Energy for all Europeans: with a focus on buildings and the EPBD
Clean Energy for all Europeans: with a focus on buildings and the EPBD Frances Bean - Project Manager Buildings Performance Institute Europe QUALICHeCK International Workshop Brussels, 15 December 2016
More informationSpecial Applications of ETICS. Wolfgang Setzler, General Manager Fachverband Wärmedämm- Verbundsysteme e.v.
Special Applications of ETICS Wolfgang Setzler, General Manager Fachverband Wärmedämm- Verbundsysteme e.v. EUMEPS Master Class ETICS March 18th and 19th 2013 16/03/2013 1 TOPICS 1. Dark without any limitation?
More informationEQUITONE [pictura] Material Information Sheet
1. Product Appearance EQUITONE [pictura] Material Information Sheet EQUITONE [pictura] is a coloured facade panel. The surface is smooth, matt, with double layer acrylic coating and a UV hardened PU top-coat
More informationOverheating assessment method and results from Austrian buildings
Overheating assessment method and results from Austrian buildings Susanne Geissler ÖGNB Österreichische Gesellschaft für Nachhaltiges Bauen (Austrian Sustainable Building Council) geissler@oegnb.net 2
More informationBarriers and opportunities for achieving compliance and enforcement: application to transmission aspects Peter Wouters
Barriers and opportunities for achieving compliance and enforcement: application to transmission aspects Peter Wouters INIVE EEIG Robust Details Update after 900,000 homes Not able t Not possible to have
More informationDiagram of Leno weave
High quality glass fibre mesh fabrics are an important part of façade systems and internal plastering because they can prevent cracks and reduce the risk of mechanical damage to the surface. To achieve
More informationEJOT a sustainable connection
EJOT a sustainable connection 4 th German American Energy Efficiency Conference 6 December 2011, Houston Alexander Bauer, IBDM EJOT Building Fasteners GmbH Energy Efficiency Conference 2011 Alexander Bauer
More informationGreen public procurement for biomass (wood pellets) in Valka
Green public procurement for biomass (wood pellets) in Valka Organisation: Latvian Environmental Investment Fund and Valka Municipality Purchasing higher quality pellets from known origins for better performance
More informationSource book on Quality of the Works overall approach
Source book on Quality of the Works overall approach Hans Erhorn, Fraunhofer Institute for Building Physics 3rd QUALICHeCK conference Better compliance and quality of the works, in practice Brussels, May
More informationWP3 Impact, compliance and control of legislation - the Czech Republic. Jan Pejter ENVIROS, s.r.o. Prague
WP3 Impact, compliance and control of legislation - the Czech Republic Jan Pejter ENVIROS, s.r.o. Prague EPBD Implemented by Energy Management Act No. 406/2006 specifies buildings and constructions that
More informationNo: UK-WER _english. 1. Unique identification code of the product-type UK-WER _english
1. Unique identification code of the product-type UK-WER-0213-01_english 2. Intended use of the construction product as foreseen by the manufacturer, in accordance with the applicable harmonised technical
More informationBELGIAN/FLEMISH EVALUATION SCHEME FOR VENTILATION SYSTEMS
Authors Samuel Caillou, Paul Van den Bossche (BBRI) fact sheet #55 2017.02 Technology Ventilation Aspect Compliance frameworks Country Belgium BELGIAN/FLEMISH EVALUATION SCHEME FOR VENTILATION SYSTEMS
More informationData Sheet 3550 Englisch
Data Sheet 3550 Englisch ETICS Powder Adhesive 3550 WDVS Pulverkleber 3550 mineral adhesive and reinforcing plaster for Brillux ETICS Systems I through VI Properties Mineral adhesive and reinforcing powder.
More informationGLASS FIBRE MESH FABRICS. Stronger ideas for a sustainable world ETICS. Marble slab reinforcement. Lightweight construction boards reinforcement
GLASS FIBRE MESH FABRICS Marble slab reinforcement ETICS Mosaic reinforcement Lightweight construction boards reinforcement Profile manufacture Render reinforcement Floor heating mats Stronger ideas for
More informationCEN/TC 88/WG 18 N 754
CEN/TC 88/WG 18 N 754 REPLACES: N 744 CEN/TC 88/WG 18 External thermal insulation composite systems E-mail of Secretary: juliane.jung@din.de Secretariat: DIN WI0088330 (E) - ETICS Specification Date of
More informationEWI. Enewall EWI Inspection, Maintenance & Repair Manual. Issue 2 April Authorised by
Enewall EWI Inspection, Maintenance & Repair Manual Issue 2 April 2015 Authorised by 1 CONTENTS 1. Introduction...page 3 2. Inspection & Maintenance...page 3 3. Repair of EWI General...page 4 4. Repair
More informationIntroducing an EPC after completion of the building works:
Introducing an EPC after completion of the building works: Reasons behind and preliminary lessons learnt from the QUALICHeCK case study carried out in the Salzburg region of Austria Susanne Geissler ÖGNB
More informationGreen public procurement for printers
Green public procurement for printers The Latvian Environmental Investment Fund and The Latvian State Regional Development Agency Applying principles of green public procurement via central electronical
More informationOFFSITE CONSTRUCTION DESIGN ARE YOU COMPLIANT?
OFFSITE CONSTRUCTION DESIGN ARE YOU COMPLIANT? PRESENTED BY DECLAN WALLACE, CEO ABOUT EVOLUSION WHO WE ARE Multi-disciplinary consultancy 100% self-owned Specialise in offsite construction Work with a
More informationSenergy - FOAMGLAS EIFS system. External Insulation Façade System NFPA 285 Standard Fire Test Approved
Senergy - FOAMGLAS EIFS system External Insulation Façade System NFPA 285 Standard Fire Test Approved The Senergy - FOAMGLAS system The Senergy -FOAMGLAS system is a non-combustible insulation multilayered
More informationPotential of ventilative cooling in German residential buildings
Potential of ventilative cooling in German residential buildings QUALICHeCK-Webinar, 2016-12-01 Auf Wissen bauen Fraunhofer IBP Introduction Background Highly insulated buildings with almost completely
More informationDeliverable 3.9: Graphical flow chart of the methodological process, taking into account all tasks within WP3
Deliverable 3.9: Graphical flow chart of the methodological process, taking into account all tasks within WP3 Document published: 19.04.2018 Lead author of this document: ECOS Project coordinator: WIP
More informationcombustibility behaviour of insulation products
1 combustibility behaviour of insulation products Smouldering and continuous glowing Smouldering and continuous glowing are slow internal combustion processes that can lead to fires breaking out some distance
More informationSuperior Performance Phenolic Insulation SR/TB. Insulation for Drylining Walls Fixed with Adhesive Dabs. Walls AS LOW AS
Superior Performance Phenolic Insulation Walls SR/TB Insulation for Drylining Walls Fixed with Adhesive Dabs AS LOW AS 020 Data Sheet SR/TB is a composite insulated panel of Xtratherm phenolic insulation
More informationTimber Roof Trusses - General Information
COFORD 2017 WOOD TECHNOLOGY IRELAND. NO. 2 Key points I.S.EN 14250:2010 is the harmonised standard covering roof trusses for use in Ireland Timber Roof Trusses - General Information S.R. 70 Timber in construction
More informationEuroPHit. Outlines for training modules for designer
EuroPHit Outlines for training modules for designer Zeno Bastian Passive House Institute Darmstadt, Germany www.europhit.eu The EuroPHit Project With the EnerPHit Standard as the goal and Passive House
More informationNarrow Cavity Insulating Glass Units (IGU s) with Reduced Spacer-bar Sightlines
Always use a current GGF Member. To see the latest list of GGF Members visit www.ggf.org.uk/directory OTHER ADVICE REFERENCE 50.5 SEPTEMBER 2014 Narrow Cavity Insulating Glass Units (IGU s) with Reduced
More informationImpact resistance of external thermal insulation systems
Impact resistance of external thermal insulation systems Ewa Sudoł 1,*, Dawid Dębski 2, Renata Zamorowska 1, and Barbara Francke 1 1 Building Research Institute, Filtrowa St. 1, Warszawa -611, Poland 2
More informationEnforcing energy performance requirements in new and refurbished buildings
Wina Roelens Xavier Loncour Enforcing energy performance requirements in new and refurbished buildings August 2014 www.epbd-ca.eu Enforcing energy performance requirements in new and refurbished buildings
More informationEPC DATABASE AND CONTROL SYSTEM FOR COMPLIANT EPC INPUT DATA IN SWEDEN
fact sheet #24 2016.8 Author Pär Johansson (Chalmers) Technology Transmission characteristics Ventilation & airtightness Renewables in multi-energy systems Aspect Compliant and easily accessible EPC input
More informationFOCAL POINT RENDAPANEL TM CLADDING SYSTEM
FOCAL POINT RENDAPANEL TM CLADDING SYSTEM strength and durability SYSTEM INFORMATION & TECHNICAL SPECIFICATION V4 2002 Page 1 of 7 INTRODUCTION Monolithic Light Weight Cement Render Cladding RendaPanel
More informationOPTIWIN MOTURA. Technical Description. Synopsis:
Technical Description OPTIWIN MOTURA Synopsis: 1. Product "OPTIWIN MOTURA" General Description... 2 2. Materials... 3 2.1. Wood... 3 2.2. Surface... 3 2.2.1. Inside... 3 2.2.2. Outer shell... 4 2.3. Glazing...
More informationENVIRONMENTAL AWARENESS AND SUSTAINABILITY
ENVIRONMENTAL AWARENESS AND SUSTAINABILITY CONTRIBUTION TO THE LEED SYSTEM COMMITMENT TO THE ENVIRONMENT In PREMO, a company specialized in the design, development, production and installation of modular,
More informationPIR Insulation XT/TL. Insulation for Drylining Walls Fixed with Adhesive Dabs. Walls 04/ /0183
PIR Insulation Walls XT/TL Insulation for Drylining Walls Fixed with Adhesive Dabs 04/4130 03/0183 Data Sheet XT/TL Insulation for Drylining walls Fixed with Adhesive Dabs Thin-R Thermal Liner Dot & Dab
More informationAnnex to the Accreditation Certificate D-ZE
«DAkkS Akkreditierungsstell GmbH Annex to the Accreditation Certificate D-ZE-054-0-00 according to DIN EN ISO/IEC 7065:203 Period of validity: 26.04.208 to 25.04.2023 Date of issue: 04.05.208 Holder of
More informationTotal Concept method implementation on a European scale
Total Concept method implementation on a European scale Overall evaluation and recommendations Kalle Kuusk and Aivar Uutar Estonian Society of Heating and Ventilation Engineers February 2017 This report
More informationLIQUID APPLIED ROOF WATERPROOFING KITS
Mandate to EOTA : LIQUID APPLIED ROOF WATERPROOFING KITS Page 1 sur 11 MANDATE TO EOTA CONCERNING THE EXECUTION OF HARMONISATION WORK FOR AN ETA GUIDELINE ON CReatE LIQUID APPLIED ROOF WATERPROOFING KITS
More informationKITS FOR EXTERNAL THERMAL INSULATION COMPOSITE SYSTEM (ETICS) WITH PANELS AS THERMAL INSULATION PRODUCT AND DISCONTINUOUS CLADDINGS AS EXTERIOR SKIN
EAD 040287-00-0404 June 2017 KITS FOR EXTERNAL THERMAL INSULATION COMPOSITE SYSTEM (ETICS) WITH PANELS AS THERMAL INSULATION PRODUCT AND DISCONTINUOUS CLADDINGS AS EXTERIOR SKIN 2018 European Assessment
More informationEuropean Technical Assessment ETA-10/0067 of
European Technical Assessment ETA-10/0067 of 09.07.2015 GENERAL PART Technical Assessment Body issuing the European Technical Assessment Trade name of the construction product Product family to which the
More informationDS131 EXPANDED POLYSTYRENE (EPS) INSULATION BOARD SPECIFICATIONS
EXPANDED POLYSTYRENE (EPS) INSULATION BOARD SPECIFICATIONS 1. SCOPE 1.1 This specification covers the type, physical properties and dimensions of Expanded Polystyrene Insulation Board intended for use
More informationThermal bridges calculation rules and accounting in energy calculation in 9 focus countries
Thermal bridges calculation rules and accounting in energy calculation in 9 focus countries Jarek Kurnitski, Kalle Kuusk Tallinn University of Technology Brussels, 15 th December 2016 IEE/13/610/SIO2.675574
More informationProposal for a COUNCIL DECISION
EUROPEAN COMMISSION Brussels, 18.5.2018 COM(2018) 308 final 2018/0155 (NLE) Proposal for a COUNCIL DECISION on the conclusion of an agreement between the European Union and the Government of the People's
More informationRetrofitted listed buildings using vacuum insulation panels
Retrofitted listed buildings using vacuum insulation panels Dr. Pär Johansson Chalmers University of Technology QUALICHeCK WORKSHOP Performance of thermal insulation in low energy buildings and advanced
More informationSOUND ABSORBER FOR CHALLENGING ENVIRONMENTS REAPOR. SOUNDPROOFING SOLUTIONS FOR ALL INDUSTRIES pyroteknc.com
SOUND ABSORBER FOR CHALLENGING ENVIRONMENTS REAPOR SOUNDPROOFING SOLUTIONS FOR ALL INDUSTRIES pyroteknc.com Exceptionally high Noise Reduction Coefficient (NRC) Unique, non-combustible glass-based material
More informationEuropean Technical Approval ETA 13/0874
European Technical Approval ETA 13/0874 Trade Name Holder of the approval Website Generic type and use of construction product Modulart Modulart s.a. Rue de la déportation 218 1480 Tubize BELGIUM www.modulart.eu
More informationLeading in construction with non-metallic reinforcement.
Leading in construction with non-metallic reinforcement. Leading in construction with nonmetallic reinforcement Textile-reinforced concrete is the technology of the future. Reinforcements made of carbon
More informationCertificate No: EW369A
Certificate No: EW369A Rockwool UK - REDArt Silicone Description of Product The REDArt Silicone system is produced from insulation made of renewable volcanic rock. There are a number of options in thickness
More informationCONSTRUCTION SECTOR STANDARDIZATION GUIDANCE DOCUMENT
TF N 548 Rev1 2012-03-29 CONSTRUCTION SECTOR STANDARDIZATION GUIDANCE DOCUMENT How to draft clauses on Assessment and Verification of the Constancy of Performance (AVCP) in harmonized standards for construction
More informationAnnex to the Accreditation Certificate D-ZE according to DIN EN ISO/IEC 17065:2013
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-ZE-11267-01-00 according to DIN EN ISO/IEC 17065:2013 Period of validity: 17.08.2018 to 01.10.2022 Holder of certificate: Materialprüfanstalt
More informationEuropean Technical Approval No. ETA-12/0056
SINTEF Building and Infrastructure P.O.Box 124 Blindern N-0314 Oslo Tel. 47 22 96 55 55 Fax 47 22 69 94 38 Authorised and notified according to Article 10 of the Council Directive 89/106/EEC of 21 December
More information(Specifier Note: Aristech Surfaces LLC is the manufacturer of the Avonite brand
(Specifier Note: Aristech Surfaces LLC is the manufacturer of the Avonite brand The purpose of this guide specification is to assist the specifier in correctly specifying solid surface wall cladding, shower
More informationEUROPEAN UNION. Brussels, 3 April 2014 (OR. en) 2012/0184 (COD) 2012/0185 (COD) 2012/0186 (COD) LEX 1487 PE-CONS 11/2/14 REV 2 TRANS 18 CODEC 113
EUROPEAN UNION THE EUROPEAN PARLIAMT THE COUNCIL Brussels, 3 April 2014 (OR. en) 2012/0184 (COD) 2012/0185 (COD) 2012/0186 (COD) LEX 1487 PE-CONS 11/2/14 REV 2 TRANS 18 CODEC 113 DIRECTIVE OF THE EUROPEAN
More informationTechnical Assessment Body issuing the ETA and designated according to Article 29 of the Regulation (EU) No 305/2011: UL International (UK) Ltd
Member of www.eota.eu UL INTERNATIONAL (UK) LTD Wonersh House, Building C, The Guildway, Old Portsmouth Road, Guildford. GU3 1LR. United Kingdom. designated according to Article 29 of the Regulation (EU)
More informationEXTERIOR INSULATION FINISHING SYSTEMS. EIFS Alpha System. The House of Scandinavian Finishing Materials
EXTERIOR INSULATION FINISHING SYSTEMS EIFS Alpha System The House of Scandinavian Finishing Materials INTRODUCTION ALPHA SYSTEM As a leader in the production and distribution of environmentally friendly
More informationBlast Resistant Enhanced Curtain Wall. Reference Brand: Sapa Building System Elegance 85PF GENERAL DESCRIPTION PERFORMANCE
Blast Resistant Enhanced Curtain Wall Blast Resistant Enhanced Curtain Wall Reference Brand: Sapa Building System Elegance 85PF GENERAL DESCRIPTION Grid based thermally insulated curtain wall system with
More informationGREECE IMPACT, COMPLIANCE AND CONTROL OF EPBD LEGISLATION
GREECE IMPACT, COMPLIANCE AND CONTROL OF EPBD LEGISLATION International Workshop on Impact, compliance and control of energy legislations September 1-2, 2009 Brussels /Belgium Marianna Papaglastra, Kyriaki
More informationEuropean Technical Assessment. ETA-18/0041 of Member of. General part
INSTITU Schenkenstrasse 4 T +43 1 533 65 50 1010 Vienna Ι Austria F +43 1 533 64 23 www.oib.or.at Ι mail@oib.or.at Designated according to Article 29 of Regulation (EU) No 305/2011 Member of www.eota.eu
More informationDECLARATION OF PERFORMANCE
ROCKWOOL B.V. / ROCKPANEL Group Konstruktieweg 2 NL-6045 JD Roermond www.rockpanel.com DECLARATION OF PERFORMANCE No. 0764-CPR-0249 UK vs01 1. Unique identification code of the product-type: ROCKPANEL
More informationEuropean Technical Assessment. ETA-17/0398 of Member of. General part
INSTITU Schenkenstrasse 4 T +43 1 533 65 50 1010 Vienna Ι Austria F +43 1 533 64 23 www.oib.or.at Ι mail@oib.or.at Designated according to Article 29 of Regulation (EU) No 305/2011 Member of www.eota.eu
More informationData Sheet 3611 Englisch
Englisch ETICS Mineral Wool Lamella Insulation Board 3611 WDVS Steinlamellen-Dämmplatte 3611 MW-L 041 WAP, non-combustible, blunt edges, pre-coated on both sides Properties Nichtbrennbar (non-combustible),
More informationWORKING DOCUMENT EN EN EN
EN EN EN Draft COMMISSION REGULATION (EU) No /.. of [ ] establishing criteria determining when copper scrap cease to be waste under Directive 2008/98/EC of the European Parliament and of the Council EN
More informationCOUNCIL REGULATION (EU)
EN L 94/2 Official Journal of the European Union 8.4.2011 REGULATIONS COUNCIL REGULATION (EU) No 333/2011 of 31 March 2011 establishing criteria determining when certain types of scrap metal cease to be
More informationDecember Overview of energy efficiency measures of European Industry
December 2010 Overview of energy efficiency measures of European Industry DIRECTORATE GENERAL FOR INTERNAL POLICIES POLICY DEPARTMENT A: ECONOMIC AND SCIENTIFIC POLICY INDUSTRY, RESEARCH AND ENERGY Overview
More informationBuildings XI Conference Workshop 2: Thermal Mass IV Assessing Thermal and Moisture Control Benefits of PCM Components by Hygrothermal Simulation
Buildings XI Conference Workshop 2: Thermal Mass IV Assessing Thermal and Moisture Control Benefits of PCM Components by Hygrothermal Simulation Hartwig M. Künzel, Fraunhofer Institute for Building Physics
More information15575/17 ADD 1 1 DPG
Council of the European Union Brussels, 22 December 2017 (OR. en) 15575/17 ADD 1 DRAFT MINUTES Subject: PV/CONS 72 JAI 1186 COMIX 826 3584th meeting of the Council of the European Union (Justice and Home
More informationPOLYCAST Trench Drain Systems
POLYCAST 3621 Industrial Park Drive Lenoir City, TN 37771 Phone: 800-346-3061 Fax: 865-986-0585 Email: hpsliterature@hubbell.com www.polycastdrain.com POLYCAST Trench Drain Systems FP800 Series Specification
More informationRegulation for Scheme Owners requesting acceptance by ACCREDIA of new Conformity Assessment Schemes and their revisions
Title Reference Regulation for Scheme Owners requesting acceptance by ACCREDIA of new Conformity Assessment Schemes and their revisions RG-19 Revision 00 Date 10-10-2017 NOTE: The present document represents
More informationMAGE SOLAR Company Presentation Saudi Arabia [May 2012]
MAGE SOLAR Company Presentation Saudi Arabia [May 2012] MAGE GROUP MAGE GROUP GEO-TEC SOLAR INDUSTRIES GMBH manufacturer of high grade solar thermal collectors private houses or large scale projects national
More informationPaver Costruzioni Piacenza Paver Costruzioni Ferrara Paver Costruzioni Pistoia
PAVER is one of the largest productive complexes in the field of prefabricated concrete products for construction and urban furnishing. Constant development throughout its forty-five-year lifespan has
More informationMapetherm AR1 Light. Lightweight one-component cementitious mortar FOR THERMAL INSULATION WITH SUPERIOR LIGHTNESS AND ASTONISHING PERFORMANCE
Mapetherm AR1 Light Lightweight one-component cementitious mortar FOR THERMAL INSULATION WITH SUPERIOR LIGHTNESS AND ASTONISHING LIGHTWEIGHT Mapetherm AR1 Light One-component, lightweight cementitious
More informationBaumit External Wall Insulation Systems. System Solutions. Ideas with a future
Baumit External Wall Systems System Solutions Ideas with a future System Solutions Who are Baumit External wall insulation The Baumit brand is recognised as a leader in building materials in 28 countries
More informationAcroWall-ES System. Class PB Exterior Insulation and Finish System providing a primary moisture barrier. Typical Details
Typical Details AcroWall-ES System Class PB Exterior Insulation and Finish System providing a primary moisture barrier 1. Typical AcroWall-ES System Application 2. Typical Aesthetic Reveal 3. Typical Window
More informationDecember 2011 OFF-SITE. Off-site solutions
December 2011 Off-site solutions Why choose British Gypsum? Off-site manufacturing demands product that is proven, consistent, reliable and robust. British Gypsum has a package of products and services
More informationSupport and Training for an Excellent Energy Efficiency Performance
IEE/13/844/SI2.675838 from 01/03/2014 to 28/02/2017 Updated: 27/04/2015 Support and Training for an Excellent Energy Efficiency Performance STEEEP and coordinated by The sole responsibility for the content
More informationFacilitating the use of ETV to increase energy efficiency in water sector
Partnerzy projektu: Facilitating the use of ETV to increase energy efficiency in water sector Environmental Technology Verification (ETV) as a tool providing credible, market-useful information on the
More informationQUALICHeCK International Workshop on Summer Comfort Technologies in Buildings Athens, 9-10 March 2016
Energy Performance Buildings Standards: status and flexibility of the CEN and ISO standards on EPBD CEN: European Standard Organisation; ISO: International Standard Organisation EPBD: Energy Performance
More informationEnvironmental Product Declarations for EPS and ETICS
Environmental Product Declarations for EPS and ETICS Paola Gamarra, Senior Consultant at PE International EUMEPS Master Class ETICS March 18th and 19th 2013 16/03/2013 1 Sustainability in Building/Construction
More informationCERTIFICATE Date of issue
CERTIFICATE Date of issue 12.2.2014 No VTT-C-10787-14 NAME OF PRODUCT PreWIS CERTIFICATE HOLDER Narmapinnoitus Oy, Jonkankatu 2a1, 20360 Turku MANUFACTURERS Listed concrete element factories PRODUCT DESCRIPTION
More informationPOSITION. Smallholder Group Certification for Organic Production & Processing
POSITION Smallholder Group Certification for Organic Production & Processing PREAMBLE The majority of agriculture practitioners worldwide are smallholders. Adoption of organic agriculture, a sustainable
More informationEuropean Technical Assessment ETA-14/0354 of
European Technical Assessment ETA-14/0354 of 20.02.2015 GENERAL PART Technical Assessment Body issuing the European Technical Assessment Trade name of the construction product Product family to which the
More informationWELMEC Application of module D Quality assurance Under directive 2014/32/EU (MID) or directive 2014/31/EU (NAWID)
WELMEC 8.4 2017 Application of module D Quality assurance Under directive 2014/32/EU (MID) or directive 2014/31/EU (NAWID) WELMEC is a cooperation between the legal metrology authorities of the Member
More informationCERTIFICATION OF EXPERTS FOR THE ISSUANCE OF EPCS IN SWEDEN
Author Paula Wahlgren, Chalmers University of Technology fact sheet #56 2017.02 Technology All Technologies Aspect Compliant and easily accessible EPC input data Country Sweden CERTIFICATION OF EXPERTS
More informationFaçade excellence for every building. An overview of the alsecco external wall insulation systems
Façade excellence for every building An overview of the alsecco external wall insulation systems Changing the face of the façade Monotonous façade design has now become a thing of the past. Representing
More informationEU Treaty Declaration (No 30) on WEU (Maastricht, 7 February 1992)
EU Treaty Declaration (No 30) on WEU (Maastricht, 7 February 1992) Caption: In this Declaration made at the Maastricht European Council of 9 and 10 December 1991 and annexed to the Final Act of the Treaty
More information