DECORLINI. Lineal Acoustic Panel Systems. Innovative Intelligent Functional

Transcription

1 DECORLINI Lineal Acoustic Panel Systems Innovative Intelligent Functional

2 AT A GLANCE Superb acoustic performance Technical - aesthetic balance Flexible enough to bend and form curves Wide selection of surface finishes Precise tongue and groove jointing assures perfect planarity Ease of installation Eco compliant Reusable materials

3 HOW TO SPECIFY 1. Choose your SUBSTRATE Standard MDF Moisture Resistant MDF Fire Rated MDF Black MDF 2. Choose a PRO FILE (Please refer to perforations booklet for more information) DL (open area 17%) DL (open area 25%) DL (open area 12%) DL (open area 19%) DL (open area 7.5%) 3. Choose a FINISH Natural Timber Veneer Or any veneer of your choice Queensland Hoop Pine Ned Kelly Ironbark Roma Blackwood Alaskan White Ash Albany Blackbutt Californian Cherry Crown Cut Northern Beach SmartLook Options Austrian Forest Maple Oxbow Maple Aldini Oak Mozart Beech Wentworth Cherry Woodlands Pine Midnight Blanket White Amazon Wenge Burnie Blackwood Limed Alaskan Wood Longreach Walnut Oslo Plantation Oak 2 Pack Poly Paint Options Any solid polyurethane colour of your choice available Finishes are subject to change without notice due to availability.

4 FEATURES Handsome flat or curved timber veneer architectural acoustic panel system Choice of 5 profiles available Seamless tongue and groove installation offers a continuous surface over the entire area Can be curved to a 1m Radius Available in your choice of timber veneer, paint, melamine finish DecorSorb Integrated Acoustic Backing applied to rear of panel Quick & easy installation saves time and money resulting in an economical and efficient process Concealed fixing clips for fast installation Your Decor Systems Technical Consultant can help. Avail yourself of Decor Systems Technical Support from the earliest planning stages. For prompt answers to your questions, general and technical advice, product samples, absorption coefficients, and support from planning to specification and installation - we welcome your contact. Call us now on

5 DELIVERS UNRIVALLED POSSIBILITIES DecorLini is without peer when the project demands dynamic looks, with high sound absorption, and the ability to vary the absorption without changing the surface appearance. Imagine the unique warmth and atmosphere generated by timber. Imagine further, this naturally beautiful panel that allows unlimited sequencing to enable seamless ceiling and wall design. Indulge your design, too, with the fact that DecorLini can be curved: ceiling clouds, curved walls and other shapes are readily achievable, as are stage sets in theatres and auditoriums. Music to your ears. A feast for your eyes. DecorLini's many groove patterns ensure a solution specific to your project. Narrow spaced grooves look like a modern textured surface, wider spaced grooves can be seen individually. Manufactured in plank widths of 128mm (nominal) DecorLini can be installed by using concealed clip system provided with the planks. The most advanced sound absorption. DecorLini provides the ideal acoustics from low frequencies to the highest; naturally, this certified by authorised testing laboratories. DecorLini - gentle on our environment. The DecorLini products are manufactured from MDF (medium density fibreboard) as standard. Produced from soft and hard wood fibres with binding agents. Accoustic Test Results for a typical DecorLini Installation DecorLini can be veneered in natural timber veneer and is and is processed for each order to capture the most even appearance possible for both colour and pattern Width 128mm (nominal) Length 2400mm mm (nominal) 3600mm s Hz 200mm Airgap 50mm Airgap Minimum tested airgap is 50mm PLEASE NOTE: These specifications are subject to conditions. Please contact us to confirm your project s requirements

6 ACOUSTIC MEASUREMENT REPORT DecorLini DL Performance Indices 2,3 αw = 0.90 SAA = 0.90 NRC = 0.90 DecorLini DL Performance Indices 2,3 αw = 0.75 SAA = 0.76 NRC = 0.75 DecorLini DL Performance Indices 2,3 αw = 0.60 (M) SAA = 0.67 NRC = 0.65

7 ACOUSTIC MEASUREMENT REPORT DecorLini DL Performance Indices 2,3 αw = 0.75 SAA = 0.75 NRC = 0.75 DecorLini DL Performance Indices 2,3 αw = 0.90 SAA = 0.92 NRC = 0.90 DecorLini DL Performance Indices 2,3 αw = 0.80 (H) SAA = 0.79 NRC = 0.75

8 ACOUSTIC MEASUREMENT REPORT DecorLini DL Performance Indices 2,3 αw = 0.80 (L,H) SAA = 0.79 NRC = 0.80 TIMBER PANEL ACCLIMATIZATION AND HUMIDITY Timber panels, like other wood-based products and many other building materials, will respond to fluctuations in relative humidity and variations in temperature. Board dimensions are closely related to moisture content. It is imperative that all timber-based panels are acclimatised in the immediate area in which they are to be installed for seven (7) days before installation. Panels should be split from the packing and placed around the room without any obstruction. Room temperature and humidity levels should remain constant and conform with accepted building practices thus ensuring environmental stability and panel longevity. Areas that are exposed to higherthan normal amounts of direct sunlight, moisture, humidity and any other special considerationsshould be referred to your Project Consultants at Decor Systems for project-specific advice.

9 YOUR FIXING GUIDE Figure 11: Mounting Detail Fixing Details Consideration should be given to reduced framing centres for higher impact areas, such as corridors and crowded spaces, or where surfaces are to be curved. DecorLini wall panels should be installed with a full perimeter support and panels must have the face grain running at right angles to framing members. Starter Clip Direct fixing to timber or metal battens for wall and ceiling installations (first row only). Mounting Clip Direct fixing to timber or metal battens for wall and ceiling installations Mounting Clip Starter Clip ATTENTION The method of fixing indicated for this product is of a general nature only and does not allow for specific design criteria such as wind loads, expansion joints or any other special design requirements which should be separately provided for by the specifier. Due to continual product improvement the information in this publication is subject to alteration without notice. No part of this publication may be reproduced without the written consent of Decor Systems Australasia. Contact your Decor Systems consultant for additional installation information. YOUR SUGGESTED SPECIFICATIONS : This suggested specification is submitted without prejudice, and does not take into account specific criteria or other design requirements which must be addressed by the specifier. The following draft specifications contain 2.0 PRODUCT The sections following of italicised draft specifications text where contain the Important: 2.0 PRODUCT Where acoustic performance is sections specifiers of input italicised is required. text where the specifiers required, Important: add DecorSorb Where acoustic after the performance product type is in input Text identified is required. with an asterisk* requires clause required, 2.1 and add include DecorSorb paragraph after the 2.2 product in project Text the non identified applicable with an wording asterisk* to be requires struck specification. type in clause 2.1 and include paragraph 2.2 the out non or deleted. applicable wording to be struck out or in project specification. deleted. Text containing 2.1 PANELS Text requires containing the specified information requires to be the Ceilings/walls* 2.1 PANELSshall be DecorLini type specified inserted. information to be inserted. (insert Ceilings/walls* code) mm shall be DecorLini thick type by Decor Systems (insert Australasia. code) mm The Decor Systems thick GENERAL GENERAL Consultant by Decor for Systems this project Australasia. is: The Decor SCOPE SCOPE Systems Consultant for this project is: Materials listed below to be supplied and installed to to all areas all areas detailed detailed on drawings, on or Panels shall be otherwise drawings, quantified. or otherwise quantified. Panels *Pre-finished shall be with Decor Systems DecorImage *Pre-finished with Decor Systems(design) 1.2 QUALIFICATIONS decorative DecorImage surface finish and (design) Installation shall comply with the relevant (style) decorative edge with surface finish and (design) building codes using approved fixings fixings and the finish. (style) edge with (design) work and the executed work by executed competent by tradesmen, competent *Veneered finish with (type veneer) endorsed tradesmen, by endorsed Decor Systems by Decor Australasia. Systems laminated to the exposed face/face and *Veneered with (type veneer) Australasia. edges* of the panel and pre-finished with laminated to the exposed face/face and (type of coating). edges* of the panel and pre-finished with 1.3 STORAGE OF MATERIAL *Site painted as nominated is finishes to site shall be stored (type of coating). All materials delivered to site shall be schedule. flat stored in an flat enclosed in an shelter, enclosed providing shelter, *Site painted as nominated is finishes protection providing protection from damage from and damage exposure and to 2.2 ACOUSTIC schedule. TREATMENT the exposure elements. to the Damaged elements. or deteriorated Damaged or DecorLini panels shall be supplied with material deteriorated shall be material immediately shall removed be from DecorSorb 2.2 ACOUSTIC Integrated TREATMENT Acoustic Backing and shall site. immediately Panels should removed be allowed from site. to acclimatise Panels conform DecorLini to Acoustic panels Test shall Report be supplied No. A03RMST1. with in should the area be allowed in which to they acclimatise are to be installed. the DecorSorb Integrated Acoustic Backing and This area is in best which achieved they are by standing to be installed. individual 3.0 INSULATION shall conform to Acoustic Test Report panels This is loosely best around achieved the room by and standing allowing Panels No. shall A03RMST1 be installed with type air individualpanels to freely circulate loosely around around them the for room several and thickness backing insulation at the rear of days and allowingair prior to fixing. to freely circulate around each 3.0 panel. INSULATION them for several days prior to fixing. Panels shall be installed with type and thickness backing insulation at the rear of each panel. Insulating materials to be laid across Insulating materials mm battens to be laid with across fabric facing tensioned over battens mm battens to create with fabric a facing mm tensioned deep air over gap/installed battens to create with a insulationfitted between mm deep support air gap/installed members with and insulation fabric facing fitted fitted over between entire support surface members area* carefully and fabric installed to facing avoid fitted creasing. over entire surface area* carefully installed to avoid creasing. 4.0 EXECUTION 4.0 EXECUTION Wall studs/battens/furring channels* shallbe installed Wall studs/battens/furring mm channels* centres shall and allow for be full installed perimeter at support of mm all centres wall panels. and Ceiling allow for panels full perimeter must be installed support of with all wall face grain at panels. right angles Ceiling to panels battens/furring must be installed channels* and all with panels face grain to be at right acclimatised angles to battens/ according to manufacturer s furring channels* recommendation and all panels to beprior to installation. acclimatised according Panels to to manufacturer s be fixed with recommendation type prior offastener to installation. at mm centres Panels within to be fixed the body with of the panel. Panels type shall of be fastener installed at with a nominal mm perimeter centres within clearance the and body of the panel. (type and size) cover strap over all Panels joints/ shall with be installed a with a nominal mm size expressed perimeter joint clearance to all sides/vee and jointed and (type butted and together* size) cover strap over all joints/ with a mm size expressed joint to all 5.0 sides/vee COMPLETION jointed and butted together* Upon completion of the installation, check that all 5.0 panels COMPLETION and cover moulds (if applicable) are securely Upon completion fastened to of their installation, framing members check and all that fixings all panels are properly and cover installed moulds (if and applicable) are to securely be prepared fastened to an to their approved framing standard finished. Surface in members readiness and to all receive fixings surface are properly treatment installed applied by and others finished. (not applicable Surface to to be prefinished prepared to panels). approved standard in readiness to receive surface treatment applied by others (not applicable to prefinished panels)

10 DECOR SYSTEMS AUSTRALIA FREECALL DECOR SYSTEMS NZ FREECALL DECOR SYSTEMS AUSTRALIA NEW SOUTH WALES House of Decor 6 Millennium Court Silverwater NSW 2128 Australia QUEENSLAND 194 Varsity Parade, Varsity Lakes QLD 4227 Australia VICTORIA Link Drive Campbellfield VIC 3061 Australia WESTERN AUSTRALIA 7 Bellows Street Welshpool WA 6106 Australia SOUTH AUSTRALIA Innovation House 50 Mawson Lakes Boulevard Mawson Lakes SA 5095 Australia DECOR SYSTEMS NZ 2 Edmonton Road Hornby Christchurch 8042 New Zealand DECOR SYSTEMS UK 178 Cheddon Road Taunton TA2 7AN United Kingdom