LEGENDS/SYMBOLS INDEX SHEET NUMBER ABBREVIATIONS PROJECT NAME AND ADDRESS 2/3/12 1ST. SUBMISSION ARCHITECTURAL DRAWINGS: DATED 08/05/11

Transcription

1 LEGENDS/SYMBOLS FINISHED WOOD PLYWOOD DIMENSION LUMBER BATT INSULATION FACE BRICK GROUT RIGID INSULATION GLAZED TILE CUT STONE MARBLE CONCRETE ACOUSTICAL CEILING CONCRETE BLOCK SHIM PACK STEEL IN SECTION ALUMINUM DETES BLOCKING OR SHIM, T CONTINUOUS, T NECESSARILY ONE PIECE & T BY BOYKIN DETES BACKER ROD OR CAULK ROPE ANCHOR LOCATION FASTENER LOCATION DIMENSIONAL REFERENCE / ELEVATION ARCHITECTURAL DRAWINGS: DATED 08/05/11 WORKING POINT S FIELD APPLIED SEALANT CUSTOMER TAKEOFF: NA SD SHOP DRILL FD FIELD DRILL SPECIFICATIONS: NA 1 GLAZING INDICATION NUMBER DETAIL NUMBER SHEET NUMBER ADDENDUM: NA OTHER: NA A WINDOW MARK 1 REVISION. (SMALL TRIANGLE) A A DOOR NUMBERS B C A 4.01 ELEVATION LOCATION-VIEW POINT ELEVATION MARK/TITLE ELEVATION SHEET NUMBER D E F G ABBREVIATIONS A/C A.F.F. B.O. C L B.O.M. DIM. D.L.O. D.L. D.O. EL. F.D. F.F. G.C. M.O. M.L. N.B.B. ACCESS CONTROLLED ABOVE FINISHED FLOOR BY OTHERS BOTTOM OF MULLION CENTER LINE DIMENSION DAYLIGHT OPENING DEAD LOAD (ANCHOR) DOOR OPENING ELEVATION FRAME DIMENSION FINISH FLOOR GENERAL CONTRACTOR MASONRY OPENING MULLION LENGTH T BY TBOYKIN DETES RTH DIRECTION N.I.C. N.T.S. O.D. O.F.D. REF. R.O. T.O.F.F. T.O.M. T.O.S. T.O.STL. U.N.O. W.C. W.D. W.L. W.P. T IN CONTRACT T TO SCALE OPENING DIMENSION OVERALL FRAME DIMENSION REFERENCE ROUGH OPENING TOP OF FINISHED FLOOR TOP OF MULLION TOP OF SLAB TOP OF STEEL UNLESS TED OTHERWISE WEB CENTER WINDOW DIMENSION WIND LOAD (ANCHOR) WORKING POINT H I J INDEX SHEET NUMBER DESCRIPTION.01 COVER SHEET GENERAL INFORMATION, GLASS SCHEDULE & DOOR HARDWARE FLOOR PLANS ELEVATIONS DETAILS.01

2 PRODUCT TYPES YKK YHS 300OG 3" X 7 11/16" CURTAINWALL - EXTERIOR CURTAINWALL GLASS SCHEDULE FRONT SET TO ACCEPT 1 5/16" GLASS W1 W2 W3 W4 W5 W6 W7 GLASS SURFACE ILLUSTRATION: YKK YES 45FS 1 3/4" X 4 1/ STOREFRONT - INTERIOR FRAMES CENTER SET TO ACCEPT 1/4" GLASS W8 EXTERIOR INTERIOR YKK 35H IMPACT RESISTANT DOORS TO ACCEPT 9/16" GLASS CONVENTIONAL SPACER LAMINATED GLASS 011 YKK 35 MEDIUM STILE DOORS TO ACCEPT 1/4" GLASS GLAZING TYPE DESCRIPTION SUPPLIED BY GLAZED BY YKK BOYKIN YKK BOYKIN 010 IG1 1 5/16" VISION TEMPERED- EXTERIOR FRAMES - BLAST RESISTANT OUTBOARD - 1/4" TEMPERED SPACER - 1/ AIRSPACE INBOARD - 9/16" CLEAR LAMINATED DG 9/16" LAMINATED VISION - EXTERIOR DOOR GLASS - BLAST RESISTANT 9/16" LAMINATED GLASS SG1 1 5/16" SPANDREL- EXTERIOR FRAMES - BLAST RESISTANT OUTBOARD - 1/4" TEMPERED SPACER - 1/ AIRSPACE INBOARD - 9/16" CLEAR LAMINATED WITH SPANDREL COATING ON #6 SURFACE FINISH TYPE AND COLOR: DARK BRONZE ADIZED SG2 1/4 1 5/16" SPANDREL- EXTERIOR FRAMES - BLAST RESISTANT OUTBOARD - 1/4" TEMPERED SPACER - 1/ AIRSPACE INBOARD - 9/16" CLEAR LAMINATED WITH SPANDREL COATING ON #6 SURFACE 1/4" TEMPERED GLASS - INTERIOR GLASS 1/4" CLEAR TEMPERED GLASS ** PLEASE REFER TO SEPARATE GLASS SAMPLES AND SUBMITTALS FOR EXACT GLASS MAKEUP **.02

3 HARDWARE SCHEDULE: HW #1 MODIFIED DOOR 011 SURFACE MOUNTED CLOSER (SUPPLIED BY OTHERS) YKK STANDARD 1 1/2 PAIR BUTT HINGES VON DUPRIN 99 CONCEALED VERTICAL ROD PANIC DEVICE YKK E AIR ONLY THRESHOLD YKK STANDARD 1" DIAMETER PULL SETS YKK STANDARD WEATHERSTRIPPING.03

4 BASEMENT FLOOR PLAN NTS ARCHITECTURAL REFERENCE A-011 ARCH / G.C. TE: FLOOR PLANS ARE PROVIDED FOR OPENING TYPE LOCATION ONLY. REFER TO SPECIFIC MARK ELEVATIONS FOR SIZE REFERENCE DIMENSIONING, MULLION SPACING, ETC. 1.01

5 1ST FLOOR PLAN NTS ARCHITECTURAL REFERENCE A-012 ARCH / G.C. TE: FLOOR PLANS ARE PROVIDED FOR OPENING TYPE LOCATION ONLY. REFER TO SPECIFIC MARK ELEVATIONS FOR SIZE REFERENCE DIMENSIONING, MULLION SPACING, ETC. 1.02

6 2ND FLOOR PLAN NTS ARCHITECTURAL REFERENCE A-013 ARCH / G.C. TE: FLOOR PLANS ARE PROVIDED FOR OPENING TYPE LOCATION ONLY. REFER TO SPECIFIC MARK ELEVATIONS FOR SIZE REFERENCE DIMENSIONING, MULLION SPACING, ETC. 1.03

7 2.01

8 2.02

9 2.03

10 2.04

11 WEEP HOLES WEEP HOLE WEEP HOLE WEEP HOLES WEEP HOLES WEEP HOLE 3.01

12 WELD AS REQ'D BY INSTALLER C OF FLOOR L 1/4" COUNTERSINK FASTENERS AS REQ'D TO ATTACH 1/4" TAP PLATE TO FRAMING WELD AS REQUIRED BY INSTALLER 1/4"x4"x5 1/ STEEL ANGLE WINDLOAD ANCHOR 4" LONG WITH (1) 9/16" X 1 1/ SLOTTED HOLE () D 3.02 C " (1) 9/16 X 1 1/ SLOTTED HOLE SHOP PREPPED (1) 1/x 4" BOLT (N.B.T.) FIELD MATCH DRILL VERTICALS 1/4"x F.V." STEEL PLATE WIND LOAD ANCHOR 4" LONG WITH (1) 9/16" X 1 1/ SLOTTED HOLE WELD AS REQ'D BY INSTALLER 1 1/ 2 1/ 1" 1/4" B /16" THICK NYLON SLIP PADS 1/4"x4"x5" TAP PLATE W/ TAPPED HOLE FOR (1) 1/ BOLT AS REQ'D () D SECTION 5" (6) #10 FLAT HEAD COUNTERSINK FASTENERS AS REQ'D TO ATTACH 1/4" TAP PLATE TO FRAMING (1) 9/16"Ø HOLE SHOP PREPPED (N.B.T.) C OF MULLION SPLICE JT. L C SECTION 4" C OF PRESSURE PLATE JT. L C OF COVER SPLICE JT. L 1/4" x 4" x 5" TAP PLATE WITH TAPPED HOLE FOR (1) 1/ BOLT AS REQ'D () A SECTION WIND LOAD ANCHOR A 3.02 E 3.02 WELD AS REQUIRED BY INSTALLER F /4" COUNTERSINK FASTENERS AS REQ'D TO ATTACH 1/4" TAP PLATE TO FRAMING (1) 9/16 HOLE SHOP PREPPED 1/4"x F.V." STEEL PLATE DEAD LOAD ANCHOR 4" LONG WITH (1) 9/16" HOLE 4" 1/4"x4"x5 1/ STEEL ANGLE DEADLOAD ANCHOR 4" LONG WITH (1) 9/16" HOLE () (1) 1/x 4" BOLT (N.B.T.) FIELD MATCH DRILL VERTICALS WELD AS REQ'D BY INSTALLER WEEP HOLES B SECTION WORKING SPLICE 1/16" THICK NYLON SLIP PADS 1/4"x4"x5" TAP PLATE W/ TAPPED HOLE FOR (1) 1/ BOLT AS REQ'D () E SECTION F 1 1/ 2 1/ 1" SECTION 5" 4" (6) #10 FLAT HEAD COUNTERSINK FASTENERS AS REQ'D TO ATTACH 1/4" TAP PLATE TO FRAMING (1) 9/16"Ø HOLE SHOP PREPPED (N.B.T.) 1/4" x 4" x 5" TAP PLATE WITH TAPPED HOLE FOR (1) 1/ BOLT AS REQ'D () DEAD LOAD ANCHOR 3.02

13 3.03

14 E E E E E E E E E E E E E E E E E E E E E E E