ESTIMATING/TAKE-OFF AND ORDERING GUIDE
|
|
|
- Eric Nichols
- 5 years ago
- Views:
Transcription
1 MAY, WALL SYSTEM 1 CURTAIN WALL 1 ESTIMATING/TAKE-OFF AND ORDERING GUIDE
2 WALL SYSTEM 1 CURTAIN WALL MAY, 2017 INDEX PAGE PART IDENTIFICATION , 4, 5 MATERIAL TAKE-OFF GUIDE PERIMETER DETAILS , 8 ANCHOR CHARTS INTERMEDIATES INSIDE CORNER OUTSIDE CORNERS , 13 ENTRANCE DETAILS , 15 GLASSVENT WINDOWS FOR CURTAIN WALL WINDOW APPLICATION MID ANCHOR DETAIL INTERMEDIATES W/ FIBERGLASS PRESSURE PLATE Consult the KawneerDirect website for the latest updates to the estimating/ take-off and ordering guides before beginning work on your project.
3 MAY, WALL SYSTEM 1 CURTAIN WALL PARTS IDENTIFICATION 3 1" FRAMING 1/4" FRAMING Extrusion # Profile Description Extrusion # Profile Description /4" Lightweight 5-1/4" Heavyweight Lightweight Heavyweight /4" /4" Lightweight 5-1/4" Heavyweight Lightweight Heavyweight /4" /4" /4" /4" /4"
4 WALL SYSTEM 1 CURTAIN WALL MAY, 2017 PARTS IDENTIFICATION PRESSURE PLATE GLAZING ADAPTERS (1" SYSTEM) Extrusion # Profile Description Standard dry glazed pressure plate. Pre-punched for pressure plate fasteners. Flush Double Acting Door Adapter pressure plate. For use with cover. See Entrance Details in this Take-Off Guide. Flush Single Acting Door Adapter pressure plate. For use with cover. See Entrance Details in this Take-Off Guide. Optional dry glazed pressure plate. For use with (2-1/2") deep cover. Pre-punched for pressure plate fasteners. 1" System Extrusion # Profile Description /8" Infill /4" Infill /8" Infill /2" Infill /8" Infill /4" System PERIMETERS Extrusion # Profile Description 1" "F" Perimeter 1/4" "F" Perimeter Jamb Channel 5-1/4" & 6" System Perimeter A Jamb Channel 6-3/4" & 7-1/2" System Perimeter A
5 MAY, WALL SYSTEM 1 CURTAIN WALL PARTS IDENTIFICATION 5 SNAP-ON COVERS OPEN BACK FILLERS Extrusion # Profile Description Extrusion # Profile Description COVER SLEEVES Part # Profile /4" Standard Cover 1-1/4" Optional Cover 2-1/2" Optional Cover 3" Optional Cover Flush Door Adapter Cover Description 3/4" Standard Cover Sleeve Splice Sleeves Open Back Filler 5-1/4" & 6" System Open Back Filler 6-3/4" & 7 1/2" System Part # Profile Description SHEAR BLOCK FASTENERS Horizontal (2 per shear block) Mullion Sleeve 5-1/4" Mullion Sleeve Vertical (2 per shear block) Typical /4" Optional Cover Sleeve 2-1/2" Optional Cover Sleeve 3" Optional Cover Sleeve PRE-PUNCHED SHEAR BLOCKS Part # Intermed. Horiz Intermed. Horiz Head / Sill Head / Sill Head / Sill Head / Sill Description 5-1/4" & 6" System 6-3/4" & 7-1/2" System 5-1/4" & 6" System Perimeter B C 6-3/4" & 7-1/2" System Perimeter B 5-1/4" & 6" System Perimeter A 6-3/4" & 7-1/2" System Perimeter A C
6 WALL SYSTEM 1 CURTAIN WALL MAY, 2017 MATERIAL TAKE-OFF SIDE BLOCK VERTICAL SHEAR BLOCK JOINT PLUG OPEN BACK FILLER HORIZONTAL INTERIOR WEATHERING GLAZING COVER THERMAL SEPARATOR EXTERIOR WEATHERING DESCRIPTION PART NUMBER GLAZING PRESSURE PLATE TAKE-OFF GUIDE Vertical (24'-0" S/L) Make Proper Selection Stock Lengths Required Horizontal (24'-0" S/L) Make Proper Selection Stock Lengths Required Open Back Filler (24'-0" S/L) Cover (24'-0" S/L) Glazing Pressure Plate (24'-0" S/L) Make Proper Selection Make Proper Selection Stock Lengths Required Stock Lengths Required Stock Lengths Required Thermal Separator Interior / Exterior Weathering Pressure Plate Fastener Vertical/Horizontal Footage 4 x Vertical/Horizontal Footage 1.8 x Thermal Separator Setting Block (1/4" Framing) Per D.L.O. Setting Block (1" Framing) Per D.L.O. Side Block (1/4" Framing) Per D.L.O. Side Block (1" Framing) Per D.L.O. Shear Block See Shear Block Chart 2 Per Horizontal Shear Block to Vertical Fastener Per Shear Block Shear Block to Horizontal Fastener Per Shear Block Joint Plug (1/4" Framing) (Typical) Per Horizontal Joint Plug (1" Framing) (Typical) Per Horizontal Perimeter "A" Joint Plug (1" Framing) (Typical) Per Horizontal Perimeter "A" Joint Plug (1/4" Framing) (Typical) Per Horizontal Perimeter "C" Vertical End Caps 1" Per Vertical Perimeter "C" Vertical End Caps 1/4" Per Vertical Note: For other applications and accessories, reference shop drawings, installation instructions and Kawneer's website at
7 MAY, WALL SYSTEM 1 CURTAIN WALL PERIMETER DETAILS 7 A EXTERIOR FRAME PERIMETER Note: Requires Head / Sill Shear Blocks: " System /2" System Head / Sill Joint Plugs: " Framing /4" Framing Use "F" & "T" Anchors PERIMETER GASKET SEALANT AND BACK-UP ROD BY OTHERS PERIMETER GASKET SHIM AS REQUIRED BY OTHERS SEALANT AND BACK-UP ROD BY OTHERS. B "F" PERIMETER Note: Use a or without F or T anchors only if mullion end reactions are less than 350 pounds. Note: Requires Head / Sill Shear Blocks: " System /2" System Use typical joint plugs PERIMETER GASKET SHIM AS REQUIRED BY OTHERS PER JOB CONDITION SEALANT BY OTHERS "F" PERIMETER, "F" PERIMETER FOR 1/4" SHIM AS REQUIRED BY OTHERS.
8 WALL SYSTEM 1 CURTAIN WALL MAY, 2017 PERIMETER DETAILS C PERIMETER PRESSURE PLATES Note: Requires Head / Sill Shear Blocks: " System /2" System Typical Joint Plugs Use "F" & "T" Anchors PERIMETER GASKET SEALANT AND BACK-UP ROD BY OTHERS PRESSURE PLATE SHIM AS REQUIRED BY OTHERS. Note: Uses vertical top & bottom end caps (1") (1/4") PERIMETER GASKET SEALANT AND BACK-UP ROD BY OTHERS PRESSURE PLATE SHIM AS REQUIRED BY OTHERS.
9 MAY, WALL SYSTEM 1 CURTAIN WALL ANCHOR CHARTS 9 "F" AND "T" ANCHOR CHARTS MULLION Note: T- anchors must be used if mullion end reactions exceed 350 pounds. If mullion end-reactions are less than 350 pounds, then perimeter anchoring may be used. (See page 4). End Reactions = Module (ft.) x Length (ft.) x Windload (PSF) (Pounds) 2 PART NUMBER PART NUMBER F - Anchor Chart To be used with , , , , , , T - Anchor Chart To be used with System 5-1/4" & 6" 6-3/4" & 7-1/2" System , , , /4" & 6" FASTENER PREPS , , , "T" Anchor "F" Anchor 6-3/4" & 7-1/2" "T" ANCHOR ("F" ANCHOR SIMILAR)
10 WALL SYSTEM 1 CURTAIN WALL MAY, 2017 INTERMEDIATES INTERMEDIATES Note: Requires Intermediate Shear Blocks: " System /2" System Typical Joint Plugs PRESSURE PLATE PRESSURE PLATE
11 MAY, WALL SYSTEM 1 CURTAIN WALL 90 INSIDE CORNER INSIDE CORNERS 1" System Shown, 1/4" System Similar 0.125" BRAKE FOAM TAPE " BRAKE
12 WALL SYSTEM 1 CURTAIN WALL MAY, OUTSIDE CORNERS 90 OUTSIDE CORNERS 1" System Shown, 1/4" System Similar " BRAKE
13 MAY, WALL SYSTEM 1 CURTAIN WALL 90 OUTSIDE CORNERS OUTSIDE CORNERS 1" System Shown, 1/4" System Similar 7-1/2" SYSTEM /2" SYSTEM 6" SYSTEM
14 WALL SYSTEM 1 CURTAIN WALL MAY, 2017 ENTRANCE DETAIL ENTRANCE DETAILS Entrance Adapters - 1" Framing /2" TRANSOM BAR Single Acting /2" Surface mounted closer only. Offset pivots or butt hinges /2" DOOR JAMB Single Acting DOOR JAMB Single Acting
15 MAY, WALL SYSTEM 1 CURTAIN WALL ENTRANCE DETAILS 15 ENTRANCE SUB-FRAME - 1" AND 1/4" FRAMING 1" System Shown, 1/4" System Similar TRANSOM BAR Use with butts, O.S. pivots, or center hung hinges. Use with concealed or surface mounted closer. DOOR JAMB NOTES: Mullion & cover extrusion numbers per job requirements. Details may vary according to hanging and closer combinations used. Typical details shown. Use assembly in lieu of if doors are hung offset /2" 3/4"
16 WALL SYSTEM 1 CURTAIN WALL MAY, 2017 GLASSVENT WINDOWS FOR CURTAIN WALL HEAD ADAPTER FOR PROJECT OUT ONLY SILL ADAPTER JAMB
17 MAY, WALL SYSTEM 1 CURTAIN WALL WINDOW APPLICATION 17 WINDOW APPLICATION 1" FRAMING ADAPTER /4" FRAMING
18 WALL SYSTEM 1 CURTAIN WALL MAY, 2017 MID ANCHOR DETAIL STANDARD INTERMEDIATE DEAD LOAD AND WIND LOAD MID-ANCHOR DETAILS For Alternate Detail Condition Consult Factory. VARIES MULLION SEPARATOR STEEL ANCHORS DEAD LOAD THRU BOLTS AS REQUIRED SEPARATOR STEEL ANCHORS SLIP WASHER WIND LOAD THRU BOLTS AS REQUIRED
19 MAY, WALL SYSTEM 1 CURTAIN WALL PRESSURE PLATE 19 INTERMEDIATES W/ FIBERGLASS PRESSURE PLATE Note: Requires Intermediate Shear Blocks: " System /2" System Typical Joint Plugs FIBERGLASS PRESSURE PLATE NOTE: REQUIRES /4 X 1-1/4" HWHTF AB SCREWS FOR PRESSURE PLATE ATTACHMENT FIBERGLASS PRESSURE PLATE
20 WALL SYSTEM 1 CURTAIN WALL MAY, 2017 KAWNEER COMPANY, INC. TECHNOLOGY PARK/ATLANTA 555 GUTHRIDGE COURT NORCROSS, GEORGIA 30092
1600 WALL SYSTEM 2 ESTIMATING/TAKE-OFF AND ORDERING GUIDE (16 Pages) E.C.# (09/09/13)
1600 WALL SYSTEM 2 ESTIMATING/TAKE-OFF AND ORDERING GUIDE 162-904 (16 Pages) E.C.#95449-095 (09/09/13) KAWNEER COMPANY, INC., 2006 1600 WALL SYSTEM 2 INDEX PAGE PARTS IDENTIFICATION ---------------------------
PART IDENTIFICATION...
2 1600 WALL SYSTEM 4 INDEX JUNE, 2010 E.C. 95468-36 PAGE PART IDENTIFICATION............................. 3, 4 MATERIAL TAKE-OFF GUIDE....................... 5 PERIMETER DETAILS..............................
ESTIMATING/TAKE-OFF AND ORDERING GUIDE
SEPTEMBER, 2017 E.C. 95514-022 1 ESTIMATING/TAKE-OFF AND ORDERING GUIDE 2 INDEX AUGUST, 2017 PAGE PARTS IDENTIFICATION --------------------------- 3,4 MATERIAL TAKE-OFF ------------------------------ 5
SPECIAL NOTES: EXCLUSIONS: THE FOLLOWING ITEMS ARE NOT SUPPLIED - SEE SEPARATE SAMPLES FOR GLASS MAKE UP.
SPECIAL NOTES: - SEE SEPARATE SAMPLES FOR GLASS MAKE UP. A/C ACCESS CONTROLLED A.F.F. C L B.O.M. DIM. D.L.O. D.L. D.O. EL. F.D. F.F. G.C. ABOVE FINISHED FLOOR BOTTOM OF MULLION CENTER LINE DIMENSION DAYLIGHT
apexfacades.com apexfacades.com. Keystone Pg- 1
1.866.970.5948 apexfacades.com apexfacades.com K E Y S T O N 1.2E H I G H 5 0 0 P E R F O R M A N C E Keystone Pg- 1 2 C U R T A I NPrintedW A L L on 04/03/18 THIS PAGE INTENTIONALY LEFT BLANK apexfacades.com
TMW 450 TECHNICAL MANUAL
ARCHITECTURAL METALS, INC. TMW 450 TMW 450 TECHNICAL MANUAL TMW 450 ARCHITECTURAL METALS, INC. BLANK PAGE FEATURES ARCHITECTURAL METALS, INC. TMW 450 FEATURES TMW 450 is 6 3/4" deep with a 2" wide sightline
Series Outside glazed curtain wall. Installation instructions
Series 5900 Outside glazed curtain wall Installation instructions Part NO. Y350 July 2015 SECTION TABLE OF CONTENTS PAGE I. General Notes & Guidelines 3-4 II. Perimeter Application...... 5-6 III. Anchor
Series Silicone structural glazed. Installation Instructions
Series 5600 Silicone structural glazed Installation Instructions Part NO. Y306 May 2016 SECTION TABLE OF CONTENTS PAGE I. General Notes & Guidelines 3-4 II. Perimeter Applications. 5 III. Anchor Installation.
Series Silicone structural glazed curtain wall. Installation instructions
Series 5900 Silicone structural glazed curtain wall Installation instructions Part NO. Y354 July 2015 SECTION TABLE OF CONTENTS PAGE I. General Notes & Guidelines.. 3-4 II. Perimeter Application..... 5-6
Aluminum-Framed Entrances and Storefronts
University of New Hampshire University of New Hampshire Scholars' Repository Division 08 Openings Chapter 5 Technical Construction and Renovation Standards 1-25-2013 084113 - Aluminum-Framed Entrances
SWING DOOR SPECIFICATION
SWING DOOR A1 Work included: Furnish all necessary materials, labour and equipment for the complete installation of aluminum entrance doors, door frames and hardware as detailed on the drawings and specified
SECTION ALUMINUM-FRAMED ENTRANCES AND STOREFRONTS
SECTION 08 4113 ALUMINUM-FRAMED ENTRANCES AND STOREFRONTS PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Aluminum entrance doors and frames. 2. Glass infill panels. 3. Door hardware. B. Related Sections:
Flushglaze For Steel Tube Applications and Horizontal Panels. Façades Installation Guide
Flushglaze 7500 For Steel Tube pplications and Horizontal Panels Façades Installation Guide September 2016 BENCHMRK Welcome to Kingspan, global leaders in the design and manufacture of insulated metal
PINNACLE 600/650 HIGH PERFORMANCE CURTAIN WALL apexfacades.com. apexfacades.com 1.2 Pinnacle Pg- 1. Printed on 12/12/17
1.866.970.5948 apexfacades.com PINNACLE 600/650 apexfacades.com 1.2 Pinnacle Pg- 1 HIGH PERFORMANCE CURTAIN WALL THIS PAGE INTENTIONALY LEFT BLANK apexfacades.com 1.2 Pinnacle Pg- 2 Series Curtain Wall
SECTION E INDEX CURTAINWALL FRAMING SYSTEMS
SECTION E INDEX CURTAINWALL FRAMING SYSTEMS E PAGE DESCRIPTION 0 CURTAINWALL FRAMING SPECIFICATION 0 SERIES /" () WIDE THERMALLY IMPROVED CURTAIN WALL FRAMING SYSTEM FOR SEALED UNIT GLAZING. 00 SERIES
INSTALLATION INSTRUCTIONS 2-1/2 x 7-5/16 for 1-5/16 Glass
INSTALLATION INSTRUCTIONS 2-1/2 x 7-5/16 for 1-5/16 Glass -- Wet and Dry Glazed Captured System (Shown) June 2012 3010 Rice Mine Road, Tuscaloosa, Alabama 35406 1-800-772-7737 Fax 1-800-443-6261 www.coralind.com
200 Singleton Drive Waxahachie, Texas T: F:
200 Singleton Drive Waxahachie, Texas 75165 T: 972-937-9651 F: 972-937-0405 Page 2-D4 United States Aluminum SERIES 4250T AND 4250 CURTAIN WALL TABLE OF CONTENTS PAGE GENERAL NOTES...2-D4 and 3-D4 FRAME
TMS 114 XT TECHNICAL MANUAL
TECHNICAL MANUAL BLANK PAGE FEATURES FEATURES is center set flush glazed systems that are 4 1/2" deep with a 2" wide sightline Glaze from the outside or inside Screw spline or shear block fabrication Glazing
Installation Instructions
Installation Instructions 400SS Series Curtainwall 3056 WALKER RIDGE DR. NW, SUITE G WALKER, MI 49544 800-866-2227 dependable@tubeliteinc.com Revised June 2016 dependable@tubeliteinc.com Page 1 TABLE OF
2-1/4" Flush Projected Architectural Thermal Aluminum Windows. Project In TR-2400 (AW-PG80-AP) or Project Out TR-2500 (AW-PG80-AP)
2-1/4" Flush Projected Architectural Thermal Aluminum Windows Project In TR-2400 (AW-PG80-AP) or Project Out TR-2500 (AW-PG80-AP) TR-2000 Series Thermal Windows Durability, Adaptability and Thermal Performance
E-Wall System 5800, 5800-I
Windows Curtain Walls Entrances Storefronts E-Wall System 5800, 5800-I The beauty of EFCO s E-Wall Silicone Gasket curtain wall system is the simplicity in which it is installed. There are no internal
SECTION ALUMINUM-FRAMED HIGH PERFORMANCE THERMAL ENTRANCE DOORS
PART 1 GENERAL SECTION 08 1116 ALUMINUM-FRAMED HIGH PERFORMANCE THERMAL ENTRANCE DOORS 1.01 SECTION INCLUDES A. Aluminum-framed storefront, with vision glass. B. Infill panels of glass. C. Aluminum doors
System Curtain Wall Thermally Improved System
Windows Curtain Walls Entrances Storefronts System 5900 2 1 2 Curtain Wall Thermally Improved System Configurations Outside Glazed Inside Glazed 2 or 4-sided Structural Silicone Glazed The 5900 curtain
TMS 152 / 152T / 152XT TECHNICAL MANUAL
TMS 152 / 152T / 152XT TECHNICAL MANUAL BLANK PAGE FEATURES FEATURES TMS 152 (non-thermal), 152T (single thermal barrier), and 152XT (double thermal barrier) are front set flush glazed systems that are
Series x Thermal Triple Set Storefront Framing
Windows Curtain Walls Entrances Storefronts Series 433 2 x 4 1 2 Thermal Triple Set Storefront Framing Configurations Screw Spline Shear Block System 433 is a thermally broken storefront framing system.
SERIES 5600PG PREGLAZABLE CURTAINWALL
SERIES 5600PG PREGLAZABLE CURTAINWALL Part Y56P EFCO 2016 Y56P Page 1 Section Page 1. General notes and Guidelines. 3-4 2. Parts Identification.. 5-8 3. Setting and Anchoring Units.... 9-13 4. Horizontal
SERIES 487 CENTER GLAZED SLIDING DOOR WITH 1-1/2" TRIM
INSTALLATION INSTRUCTIONS SERIES 487 CENTER GLAZED SLIDING DOOR WITH 1-1/2" TRIM Phone: (800) 421-6144 Fax: (866) 921-0531 crlaurence.com usalum.com crl-arch.com 11M0200 GENERAL INSTALLATION NOTES Recommended
SECTION ALUMINUM ENTRANCES AND STOREFRONTS. A. Section Includes: Aluminum doors and window wall frames.
SECTION 08410 ALUMINUM ENTRANCES AND STOREFRONTS PART 1 GENERAL 1.01 SUMMARY A. Section Includes: Aluminum doors and window wall frames. B. Related Sections: 1. Section 08480 Balanced Doors 2. Section
Architectural Specification Manual
Architectural Specification Manual SteelBuilt Curtainwall INFINITY System The SteelBuilt Curtainwall Infinity System can use as a back mullion almost any type of custom steel member, such as stainless
Architectural Testing ASTM E283, ASTM E330, ASTM E331 TEST REPORT. Report Number: C Rendered to: Tubelite Inc.
Architectural Testing ASTM E283, ASTM E330, ASTM E331 TEST REPORT Report Number: C0271.01-450-44 Rendered to: Tubelite Inc. Walker, Michigan MODEL DESIGNATION: 400 Series Curtainwall with 4 Sided SSG PRODUCT
TABLE OF CONTENTS: HURRICANE RESISTANCE STOREFRONT SERIES IT600 REVISION D E S C R I P T I O N HURRICANE RESISTANT STOREFRONTS CRL / US ALUMINUM
TABLE OF CONTENTS: SHEET DWG D E S C R I P T I O N REVISION 1 2 3 4 HURRICANE RESISTANCE STOREFRONT 1 1.00 COVER 2 1.01 ELEVATION, PLAN AND SECTION 3 1.02 ELEVATION, PLAN AND SECTION 4 1.03 ELEVATION,
Tender No Section St. James - Assiniboia Centennial Pool Fitness Facility Addition Page 1
Fitness Facility Addition Page 1 PART 1 GENERAL 1.1 SECTION INCLUDES.1 Extruded aluminum windows with fixed sash..2 Factory glazed..3 Perimeter sealant. 1.2 RELATED SECTIONS.1 Section 05500 - Metal Fabrications.2
7000 Series Curtain Wall Information Specifications
7000 Series Curtain Wall Information Specifications Information All framing members shown in this section, unless noted otherwise, are stock items in dark bronze or clear anodic coatings and are available
METL-VISION WINDOW SYSTEM FOR HORIZONTAL WALL
METL-VISION WINDOW SYSTEM FOR HORIZONTAL WALL TEchnical bulletin PIONEERING INSULATED METAL PANEL TECHNOLOGY PIONEERING INSULATED METAL PANEL TECHNOLOGY CONTENTS DETAIL TITLE FILE NO. PAGE NO. INTRODUCTION.......................................................................
SECTION B3 SERIES COS451 FRONT GLAZED STACKING SYSTEM
SECTION B SERIES COS51 FRONT GLAZED STACKING SYSTEM for STOREFRONT / WINDOW WALL x ½ for 1 GLASS ARCHITECTURAL DETAILS EXTERIOR GLAZED Effective October 01 www.cardcompro.com 1 INTERIOR GLAZED www.cardcompro.com
SIGNATURE SERIES UNIT WALL
SIGNATURE SERIES UNIT WALL Note: Installation and Glazing Manuals are product specific. FOR REVIEW ONLY! 01 TABLE OF CONTENTS SHEET GENERAL INFORMATION Product Use Protection and Storage Check Material
Specification Section Storefront Systems has been revised. Omit previously issued Storefront section.
December 28, 2018 ADDENDUM NO. 2 To: Re: Bidders Corey Pitts, NewQuest Properties This Addendum forms a part of the contract documents identified above. Acknowledge the receipt of this Addendum on the
FG/FT-451 S T O R E F R O N T. 2 x 4 1/2 THERMAL & NON THERMAL WALL DETAILBOOK TRULITE GLASS & ALUMINUM SOLUTIONS TM
FG/FT-451 B6 S T O R E F R O N T 2 x 4 1/2 THERMAL & NON THERMAL WALL DETAILBOOK TRULITE GLASS & ALUMINUM SOLUTIONS TM FG451 & FT451 FRAMING ( x 4-1/) C2-ELEV FG451/FT451 SYSTEM HIGHLIGHTS x 4 1/ FRAMING
1 3 4 Tie Rod Aluminum Swing Entrance Doors
Windows Curtain Walls Entrances Storefronts Series T200 Narrow Stile Series T300 Medium Stile T500 Wide Stile Configurations Narrow Stile (2 1 8 ) Medium Stile (3 1 2 ) Wide Stile (5 ) EFCO tie rod entrances
Project: U.S. Federal Courthouse, Coeur d Alene, ID
0- ALUMIUM Table of Contents BLAST MITIGATIO SECTIO PAGE SPECIFICATIOS...0- and 0- TECHICAL DATA...04- SPECIAL FEATURES...05- TYPICAL DETAILS...0- thru 08- TYPICAL DETAILS FOR MID-SPA ACHORS AD MULLIO
RIXSON Heavy Duty Floor Closers
Absolute Control: Heavy Duty Floor Closers Floor closers provide the best mechanical means of controlling a door.they are designed to work with the laws of physics to provide long lasting performance and
Duracast Pressure Plate Installation Instructions
July 2015 EFCO CORPORATION 7/2015 PART NO. YW45 1 TABLE OF CONTENTS SECTION S-5600 / S-5900 DURACAST PRESSURE PLATE PAGE I. General Notes and Guidelines. 3-4 II. Glazing Preparation & Installation... 5
ASTM E 1886 and ASTM E 1996 TEST REPORT. Report No.: A Rendered to: CORAL ARCHITECTURAL PRODUCTS Tuscaloosa, Alabama
Architectural Testing ASTM E 1886 and ASTM E 1996 TEST REPORT Report No.: A2653.02 401 44 Rendered to: CORAL ARCHITECTURAL PRODUCTS Tuscaloosa, Alabama PRODUCT TYPE: Curtain Wall SERIES/MODEL: PW257 Captured
Blast Curtain Wall Installation Analysis
August 11, 2005 57402.01-122-34 JAR/STS 1 US Aluminum BR3250 Blast C.W. Blast Curtain Wall Installation Analysis Subject: BR3250 Blast Curtain Wall System ATI Report 57402.01-122-34 Rendered to: International
System Thermal Clip Storefront System
Windows Curtain Walls Entrances Storefronts System 960 1 3 4 Thermal Clip Storefront System Configurations Shear Block Screw Spline System 960 has a face dimension of 1 3/4 and system depths from 2 3/4
PERFORMANCE TEST REPORT. Rendered to: TREMCO INC. SERIES/MODEL: Proglaze ETA - System 3 PRODUCT TYPE: Pre-Engineered Air Barrier Transition Assembly
PERFORMANCE TEST REPORT Rendered to: TREMCO INC. SERIES/MODEL: Proglaze ETA - System 3 PRODUCT TYPE: Pre-Engineered Air Barrier Transition Assembly Title Summary of Results Air Infiltration
SECTION C1. SERIES CWW451T THERMALLY BROKEN FRONT GLAZED WINDOW WALL / STOREFRONT SYSTEM 2" X 4 1 /2" for 1" GLAZING ARCHITECTURAL DETAILS
SECTION C1 SERIES CWW51T THERMALLY BROKEN FRONT GLAZED WINDOW WALL / STOREFRONT SYSTEM " X 1 /" for 1" GLAZING ARCHITECTURAL DETAILS EXTERIOR GLAZED Effective October 01 www.cardcompro.com 1 INTERIOR GLAZED
YCW 250 I-Beam Curtain Wall System Installation Manual
Installation Manual 2004 YKK AP America Inc. is a subsidiary of YKK Corporation of America. TABLE OF CONTENTS INSTALLATION NOTES..................................... Page ii PARTS DESCRIPTION Framing
SECTION ALUMINUM WINDOWS
SECTION 08520 ALUMINUM WINDOWS PART 1 - GENERAL 1.01 SUMMARY A. Section includes: 1. Storefront systems and aluminum framed glass doors. 2. Hardware, fasteners, accessories, filler pieces, etc., required
Series x Thermal Triple Set Storefront Framing
Series 433 2 x 4 1 2 Thermal Triple Set Storefront Framing CONFIGURATIONS Screw Spline Shear Block System 433 is a thermally broken storefront framing system. Glass planes can be placed in an outside set,
2018 Special-Lite ALUMINUM FRAMING
201 Special-Lite ALUMINUM FRAMING Framing Aluminum Framing Better materials and construction make our framing more durable. The frame is the foundation of any entrance. It must be capable of holding the
Architectural Subframe & Casement Windows
Architectural Subframe & Casement Windows The Metal Technology Architectural Subframe System is a complete thermally-broken framing and casement system with minimal fabrication, for all commercial and
SPECIFICATION For the Supply and Installation of BRITAL SG-2-56-HFF. Two Sided Structurally Glazed Curtain Walling. (Horizontal Structural joints)
SPECIFICATION For the Supply and Installation of BRITAL SG-2-56-HFF Two Sided Structurally Glazed Curtain Walling (Horizontal Structural joints) Issue date Revision Comment R0 Draft 05/05/09 R1 Approved
YOW 250 T Window System
MegaTherm Glass Fiber With 6/6 Nylon Thermal Break YOW 250 T SYSTEM DESCRIPTION YOW 250 T PERFORMANCE FEATURES 2-1/2 Overall Depth MegaTherm Thermal Break Separate Interior/Exterior Finish Options Variations:
Design No. HI/BP PERIMETER FIRE BARRIER SYSTEM Hilti, Inc. ASTM E 2307 Table 1
FIRESTOP JOINT SPRAY CFS-SP WB SILICONE JOINT SPRAY CFS-SP SIL F-RATING 2-HR. 2-HR. T-RATING -HR. -HR. APPLICATION THICKNESS PERIMETER FIRE BARRIER SYSTEM Hilti, Inc. ASTM E 2307 Table /8" WET FILM (/6"
T SERIES WINDOW SPECIFICATIONS
SPECIFICATIONS Part 1 - GENERAL Scope The framing shall be Metro "T" Series fixed window system with thermal break as manufactured by Metro Glass. Furnish all materials, labour, and services for the complete
Project: U.S. Federal Courthouse, Coeur d Alene, ID
0- ALUMIUM Table of Contents BLAST MITIGATIO SECTIO PAGE SPECIFICATIOS...0- and 0- TECHICAL DATA...04- SPECIAL FEATURES...05- TYPICAL DETAILS...0- thru 08- TYPICAL DETAILS FOR MID-SPA ACHORS AD MULLIO
TRUMAN STATE UNIVERSITY GREENWOOD SCHOOL WINDOW REPLACEMENT
SECTION 085200 - WOOD WINDOWS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
Series 3500 Thermal Series 3900 Fixed Thermal Architectural Grade Horizontal Sliding Window
E F C O C O R P O R A T I O N Visit us on the web at efcocorp.com IMPACT GRADE Series 3500 Thermal Series 3900 Fixed Thermal 3 1 4 Architectural Grade Horizontal Sliding Window Configurations XO OX XOX
C.R. Laurence Co., Inc. Los Angeles, California
TEST REPORT: AAMA 501-05 Performance and ASTM E 1996-09 and ASTM E 1886-05 Impact and Cyclic Test Report C. R. Laurence Co., Inc. Series: StormWall L Product/Type: SSG Twin Span Curtain Wall Test Date:
Project: North Charleston City Hall, North Charleston, SC
0- ALUINU Table of Contents STOR WALL Series IW50 SECTION PAGE SPECIFICATIONS...0- and 0- TECHNICAL DATA...04- SPECIAL FEATURES...05- TYPICAL DETAILS FOR 7/6" () GLAZING...06- TYPICAL DETAILS FOR -/6"
SERIES 4250/4250T CURTAIN WALL
INSTALLATION INSTRUCTIONS SERIES 4250/4250T CURTAIN WALL Phone: (800) 262-5151 Fax: (866) 262-3299 crlaurence.com usalum.com crl-arch.com 11M0181 HANDLING, STORAGE, AND PROTECTION OF The following precautions
BID # College Center EXTERIOR DOOR REPLACEMENT SECTION "C" TECHNICAL SPECIFICATIONS OWNER
BID # 16-15 College Center EXTERIOR DOOR REPLACEMENT SECTION "C" TECHNICAL SPECIFICATIONS OWNER Board of Trustees Middlesex County College 2600 Woodbridge Avenue P.O. Box 3050 Edison, New Jersey 08818-3050
Project No: Pakenham Branch Library, Pakenham, Ontario Section January, 2017 Page 1 of 7
January, 2017 Page 1 of 7 1 GENERAL 1.01 RELATED SECTIONS.1 Section 01 33 00 Submittal Procedures.2 Section 01 78 00 Closeout Submittals.3 Section 07 92 10 Sealants..4 Section 08 80 50 Glazing. 1.02 REFERENCES.1
Ballard Avenue Retail/Office Building For Lease
Ballard Avenue Retail/Office Building For Lease 50-5 Ballard Avenue NW, Seattle, WA 9807,850 SF Retail/Office space for lease with great visibility in downtown Ballard Prime location with over 5 feet of
2000 Skylight. For specific product applications, Consult your Kawneer representative. JANUARY, 2017 EC FEATURES ADMF020EN
JANUARY, 2017 FEATURES 1 Features Suitable for sloped glazed area, or roof mounted skylights Integrates with standard 1600 vertical wall Pressure equalized rain screen design Simple overlap connections
.1 Comply with the General Conditions of the Contract, Supplementary General Conditions and the requirements of Division 1.
PAGE 1 PART 1 GENERAL 1.1 REFERENCE.1 Comply with the General Conditions of the Contract, Supplementary General Conditions and the requirements of Division 1. 1.2 RELATED WORK SPECIFIED ELSEWHERE.1 Cast
4-5/8" Offset Projected Architectural Thermal Aluminum Windows. Project In TR-740 (AW-PG80-AP) or Project Out TR-750 (AW-PG80-AP)
4-5/8" Offset Projected Architectural Thermal Aluminum Windows Project In TR-740 (AW-PG80-AP) or Project Out (AW-PG80-AP) TR-700 Window Wall Multifaceted Window System for Flexible Design The Admiral at
MARLIN WINDOWS, INC 3500 HC SERIES 3 3 8" SLIDING WINDOW PAGE 1
PAGE 1 SPECIFICATIONS GENERAL Sliding windows shall be Marlin series #3500-HC (thermally improved) as manufactured by Marlin windows, and shall conform to ANSI/AAMA 101-88 HS-HC40. Series #3500 shall have
SECTION STAINLESS STEEL WALL PANELS
SECTION 07400 PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Dry joint, Rainscreen stainless steel wall panel system. 2. Accessories including attachments, clips, sub girts, shims, and fasteners 3.
WEB BASED APPLICATION SPECIFIC INSTALLATION INSTRUCTIONS
WEB BASED APPLICATION SPECIFIC INSTALLATION INSTRUCTIONS Window Fastening Although all possible measures have been taken to insure the accuracy of the material presented, WIXSYS, and the author are not
HYBRID Curtain Wall HYBRID. Product Manual Curtain Wall 2008
HYBRID Curtain Wall HYBRID Product Manual Curtain Wall 2008 HCW.1.ii 10.08 Hybrid Curtain Wall Introduction The Company Senior Aluminium Systems are a group of companies based in the United Kingdom supported
Wall Assembly - ACM Metal Panel at Steel Stud Framing SCALE: 3" = 1'-0"
Thermafiber "RainBarrier 45" Nvelope "NH2" Bracket Adapter Nvelope Wall Bracket (90mm or as Req'd) ACM Metal Panel System Metal Panel Extrusion per ACM Manufactuer 1 2 " Self-Drilling Stainless Steel Fastener
Curtain Wall Systems. The Fusion Of Strength And Efficiency. Finally, a curtain wall framing system that equals the thermal performance of glass.
Curtain Wall Systems The Fusion Of Strength And Efficiency Advanced Composite Design U Values as low as 0.21 CRF (frame) up to 90 20 PSF Water Tested/Certified 60 PSF Design Pressure Finally, a curtain
SECTION ALL ULTREX DOUBLE HUNG WINDOW
SECTION 08 54 13 ALL ULTREX DOUBLE HUNG WINDOW PART 1 GENERAL 1.1 SECTION INCLUDES A. All Ultrex double hung window complete with hardware, glazing, weather strip, insect screen and half screen, grillesbetween-the
A. Section includes extruded aluminum windows with operating sash, operating hardware, and insect screens.
SECTION 08 51 13 - Page 1 PART 1 GENERAL 1.1 SUMMARY A. Section includes extruded aluminum windows with operating sash, operating hardware, and insect screens. B. Related Sections: 1. Section 07 92 00
SPECIFICATION For the Supply and Installation of BRITAL UN Four Sided Unitized Structurally Glazed Curtain Walling
SPECIFICATION For the Supply and Installation of BRITAL UN-4-76 Four Sided Unitized Structurally Glazed Curtain Walling Issue date Revision Comment 07/05/09 R0 Draft 11/05/09 R1 Approved for Issue R1 Amended
SECTION ALUMINUM STORM WINDOWS
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 08 51 69.11 1. Use this section only for NCA projects. 2. Delete between //----// if not applicable to project. Also delete any other item or paragraph not applicable
FIRESTOP JOINT SPRAY CFS-SP WB. 2mm (0.079") WET FILM ± 7.5 ± 5
Design No. CEJ 27 P (HI/JS 20-05) Table. CONCRETE FLOOR ASSEMBLY: Max. two-hour rated concrete floor assembly made from either lightweight or normal weight concrete with a density of 00-50 pcf, with a
TEST REPORT. Report No.: G Rendered to: C.R. LAURENCE CO., INC. Vernon, California
TEST REPORT Report No.: G6910.01-303-47 Rendered to: C.R. LAURENCE CO., INC. Vernon, California PRODUCT TYPE: Side Hinged Door - Outswing SERIES/MODEL: 925 Title Summary of Results Design Pressure ±2640
Note: Installation and Glazing Manuals are product specific. FOR REVIEW ONLY! FEBRUARY 2012
Note: Installation and Glazing Manuals are product specific. FOR REVIEW ONLY! TABLE OF CONTENTS General Information Building Codes Structural Sealants Perimeter Sealants Material Handling Cleaning Materials
SERIES BAL-350 ALUMINUM OUTSWING ENTRANCE DOORS
SERIES BAL-350 ALUMINUM OUTSWING ENTRANCE DOORS Page 1 of 11 TABLE OF CONTENTS SECTION PAGE BALCONY DOORS GENERAL NOTES 3-5 BAL-350. TYPICAL ELEVATION 6 HEAD & TRANSOM TYPICAL DETAILS 7 SILL & JAMB TYPICAL
1 P a g e w w w. s m o k e c o n t r o l. c o m. a u
PROPRIETARY ITEM: STOPLINE AND AUTOFIRE E60 FIRE WINDOWS AND DOORS FIRE RESISTANT GLASS WINDOWS AND DOORS PROTECTING OPENINGS CLOSE TO BOUNDARIES (BOUNDARY CONTROL TM ) PART 1 - GENERAL 1.01 SUMMARY A.
STOREFRONT, CURTAINWALL & ENTRANCES
2007 STOREFRONT, CURTAINWALL & ENTRANCES 14.02 14000 Series Flush Glaze Guide Specifications General Description Furnish all necessary materials, labor and equipment for the complete installation of aluminum
Building Your Visions
Ferguson C EAP Curtain Wall Systems Ferguson-EAP 130HP Series High Performance Curtain Wall System Ferguson s 130HP curtain wall system was developed for high performance double, triple, unique acoustical
Patent No. 9,045,900 Technical Glass Products Architectural Specification Manual
Technical Glass Products Architectural Specification Manual 800.426.0279 fireglass.com FIREFRAMES ALUMINUM SERIES INTERIOR APPLICATION ONLY Fireframes Aluminum Series combined with Pilkington Pyrostop
T series Storefront Framing Flush Glazed Thermally Broken Product Details
Aluminum T-14650-series Storefront Framing Flush Glazed Thermally Broken Product Details Details: T-14650 series has a 2 sightline and is 6-1/2 deep. Utilizes a snap-in heavy duty CDM-32 door stop, which
Unitised Curtain Wall Beaded
Unitised Curtain Wall Beaded Glazed Frame Unitised Curtain Wall Reference Brand: Sapa Building System Elegance 72 GF GENERAL DESCRIPTION Unitised curtain wall system using glazing beads for glass retention.
FLUSHLINE ENTRANCES. Features
APRIL, 2012 FLUSHLINE ENTRANCES FEATURES 1 Features Flush appearance with face sheet of fiberglass reinforced polyester (FRP), acrylic modified polyester (AMP) or aluminum, that is captured on four sides
Series 3500 Thermal Series 3900 Fixed Thermal Architectural Grade Horizontal Sliding Window
Windows Curtain Walls Entrances Storefronts Series 3500 Thermal Series 3900 Fixed Thermal 3 1 4 rchitectural Grade Horizontal Sliding Window Configurations X X XX X XX Fixed Series 3500 retains an M rchitectural
PROJECT LOCATION SECTION COPPER METAL PLATE WALL PANELS
SECTION 07 4213.25 PART 1- GENERAL 1.01 SECTION INCLUDES A. Copper metal plate wall panels. 1.02 RELATED REQUIREMENTS A. Section 05 4000 Cold-Formed Metal Framing: Wall panel substrates support framing.
PRODUCT SPECIFICATION THE 9500 SERIES FAMILY - SERIES 9502 / 9503 THERMALLY BROKEN ALUMINUM OUTSWING BALCONY DOOR
PART 1 - GENERAL 08 13 16 ALUMINUM DOORS (Outswing Aluminum-Framed Glass Doors) A high-quality thermally broken aluminum balcony outswing door designed for residential high rise construction. 1.1 SUMMARY
Guide Specification for Pre-Engineered Skylight System. A. Engineering, design and drafting of the entire skylight system.
Guide Specification for Pre-Engineered Skylight System SECTION 08630 - METAL FRAMED SKYLIGHTS PART 1 GENERAL 1.01 SECTION INCLUDES A. Engineering, design and drafting of the entire skylight system. B.
Aluminum Storefront Systems SERIES 200, 300 and 500 DOORS GUIDE SPECIFICATIONS
Aluminum Storefront Systems SERIES 200, 300 and 500 DOORS GUIDE SPECIFICATIONS SECTION 08410 ALUMINUM ENTRANCES AND STOREFRONTS This suggested guide specification has been developed using the current edition
Custom fabrication in two weeks or less, guaranteed.
Custom fabrication in two weeks or less, guaranteed. Ramco is the midwest Kawneer distributor and fabricator. ramcometals.com got lead times? Ramco offers custom fabrication in two weeks or less, guaranteed!
SECTION U.S. ALUMINUM SERIES BAL-350 HURRICANE RESISTANT BALCONY/TERRACE DOOR
Page 1 of 6 SECTION 08 39 80 U.S. ALUMINUM SERIES BAL-350 HURRICANE RESISTANT BALCONY/TERRACE DOOR U.S. Aluminum has designed one of the most demanding air and water protection products, the BAL- 350 Small
SERIES ET350 STRIP WINDOW SYSTEM
INSTALLATION INSTRUCTIONS SERIES ET350 STRIP WINDOW SYSTEM Phone: (800) 262-5151 Fax: (866) 262-3299 crlaurence.com usalum.com crl-arch.com 11M0297 HANDLING, STORAGE, AND PROTECTION OF ALUMINUM The following
General Window Installation Instructions
Table of Contents Version 0.1 General Overview Pages 2-6 1. General Notes 2. Construction Notes 3. Building Codes 4. Window Installation 5. Perimeter Anchorage 6. Operable Window Sections Basic Installation
DETENTION / SECURITY WINDOWS SECTION 08660
SWI Steel Window Specifications DETENTION / SECURITY WINDOWS SECTION 08660 Steel Window Institute, Inc. 1300 Sumner Ave. Cleveland, OH 44115-2851 Phone: 216-241-7333 Fax: 216-241-0105 E-Mail: swi@steelwindows.com