Fisher ENVIRO-SEAL and HIGH-SEAL Packing Systems for Sliding-Stem Valves (Live-Loaded)
|
|
|
- Wilfrid Miller
- 6 years ago
- Views:
Transcription
1 Product Bulletin 59.1:061 D101633X012 Sliding-Stem Live-Loaded Packing Fisher ENVIRO-SEAL and HIGH-SEAL Packing Systems for Sliding-Stem Valves (Live-Loaded) Fisher patented ENVIRO-SEAL and HIGH-SEAL live-loaded packing systems offer exceptional stem sealing capabilities. These systems easily install in your existing valves or can be purchased with new valves. ENVIRO-SEAL and HIGH-SEAL packing systems help seal your process to conserve valuable process fluid and protect the environment against the emission of hazardous or polluting fluids. The long life and reliability of these systems also reduce your maintenance costs and downtime. For process control applications requiring compliance with mandated environmental protection regulations, the unique ENVIRO-SEAL packing system (figure 1) and, for hazardous service, the ENVIRO-SEAL bellows seal system are offered. These packing systems keep fugitive emission concentrations below the 100 ppm (parts per million) requirement set by the federal Environmental Protection Agency (EPA). FLANGE FOLLOWER BONNET STEM BELLEVILLE SPRINGS W5814-1* / IL The HIGH-SEAL packing system (figure 2) provides excellent sealing at pressure/temperature ratings beyond ENVIRO-SEAL limits. Both ENVIRO-SEAL and HIGH-SEAL packing systems feature live-loading and unique packing-ring arrangements for consistent, long-term sealing performance. The ENVIRO-SEAL packing system is available in double PTFE, graphite ULF, and duplex configurations. The HIGH-SEAL packing system is offered without PTFE washers (graphite composite), for nuclear applications where PTFE is prohibited, and with PTFE washers (graphite ULF) for all other applications. Features Figure 1. Fisher easy-e Valve Bonnet with ENVIRO-SEAL Packing Installed Compliance with the Clean Air Act The excellent stem sealing of the patented ENVIRO-SEAL packing system (figure 2) controls emissions to below the EPA minimum of 100 ppm (parts per million). ENVIRO-SEAL packing systems provide an excellent stem seal to help prevent the loss of process fluid. Improved Service Life ENVIRO-SEAL and HIGH-SEAL packing systems, coupled with a very
2 Sliding Stem Live Loaded Packing Product Bulletin smooth stem surface and live-loading, give you long service life with very low maintenance. The live-loading provides a constant load over the life of the packing material. This greatly reduces or, in many applications, helps to eliminate your need for packing box adjustment and maintenance. The installed packing system provides excellent sealing, guiding, and transmission of loading force. Lubrication is required for the packing studs and nuts. While it is important to properly lubricate the stud threads and internal nut threads, it is also important to properly lubricate the contacting face of the nut. Easy Installation in Existing Valves All parts needed to install the systems in existing valves are available in a convenient kit. Adaptable to Many Applications ENVIRO-SEAL systems are available with PTFE, Graphite ULF, or Duplex packing for 9.5 through 31.8 mm (3/8 through 1-1/4 inch) diameter valve stems on CL125 through CL600 valves. HIGH-SEAL systems with Graphite ULF packing are available for 9.5 through 50.8 mm (3/8 through 2-inch) diameter valve stems on CL600 through CL2500 valves. Standard ENVIRO-SEAL PTFE packing systems can be used in vacuum service with packing rings in the standard orientation. It is not necessary to reverse the PTFE packing rings. Lubrication Recommendations for ENVIRO-SEAL Packing Systems Do not lubricate ENVIRO-SEAL packing components or the bonnet bore prior to assembly. Lubrication is often used as part of standard valve assembly techniques. However, lubrication is not required for the ENVIRO-SEAL packing systems. ENVIRO-SEAL Duplex Packing Systems ENVIRO-SEAL Duplex packing systems (figure 2) are available for Fisher sliding-stem valves with valve stem diameters ranging from 9.5 to 31.8 mm (3/8 to 1-1/4 inches). See table 2 for a list of applicable product types and stem diameters. ENVIRO-SEAL Duplex packing systems were developed, utilizing the benefits of both PTFE and graphite components. These special packing systems provide the capability of graphite packing along with low friction advantages of PTFE packing. Thus, ENVIRO-SEAL Duplex packing systems provide a low friction, low emission, fire-tested solution for applications with process temperatures below 232 C (450 F). ENVIRO-SEAL Duplex packing systems were tested in accordance with API Standard 589, Fire Test Evaluation of Valve Stem Packing, first edition. 2
3 Product Bulletin Sliding Stem Live Loaded Packing BOX STUD BOX STUD SPRINGS SPRINGS ANTI- EXTRUSION RING RING FOLLOWER LANTERN RING BONNET W / IL TYPICAL ENVIRO-SEAL SYSTEM WITH PTFE W TYPICAL ENVIRO-SEAL SYSTEM WITH GRAPHITE ULF BOX STUD BOX STUD SPRINGS SPRING FOLLOWER FOLLOWER A7018 / IL W TYPICAL ENVIRO-SEAL SYSTEM WITH DUPLEX TYPICAL HIGH-SEAL SYSTEM WITH GRAPHITE ULF Figure 2. Fisher ENVIRO-SEAL and HIGH-SEAL Packing Systems 3
4 Sliding Stem Live Loaded Packing Product Bulletin Table 1. Sliding-Stem Product Availability for Fisher ENVIRO-SEAL PTFE and Graphite ULF Packing Systems TYPE STEM DIAMETER, mm (INCHES) 9.5 (3/8) 12.7 (1/2) 19.1 (3/4) 25.4 (1) 31.8 (1-1/4) STEM DIAMETER, mm 12 mm 18 mm A X X X X X CAV X X X D X DA X DBQ X X X X DBQ-NS X easy-e (ED, ES, ET, EZ, EW) X X X X X E-NS X EH X X X X ENA X ET-C X X X EWT-C X X X EZ-C X X X FB X X HP X X X X HS X X X SS X SS X X X SS X SS X SS X YD X X X X X YS X X X X X Table 2. Sliding-Stem Product Availability for Fisher ENVIRO-SEAL Duplex Packing TYPE 9.5 (3/8) STEM DIAMETER, mm (INCHES) 12.7 (1/2) 19.1 (3/4) 25.4 (1) 31.8 (1-1/4) A X X X X X DBQ X X X X easy-e (ED, ES, ET, EZ, EW) X X X X X EH X X X X FB X X HP X X X X HS X X X SS X X X YD X X X X X YS X X X X X 4
5 Product Bulletin Sliding Stem Live Loaded Packing ENVIRO-SEAL Graphite ULF and HIGH-SEAL Graphite ULF A6142-1/IL Figure 3. Applications Guidelines for 100 ppm Service Temperature, C ENVIRO-SEAL PTFE AND ENVIRO-SEAL DUPLEX HIGH-SEAL GRAPHITE ULF Pressure, PSI ENVIRO-SEAL GRAPHITE ULF HIGH-SEAL GRAPHITE Pressure, Bar Ordering Information When ordering, specify: For Existing Valves 1. Process fluid Temperature, F Figure 4. Applications Guidelines for Nonenvironmental Service 6. Valve stem diameter and bonnet type (plain, extension, or bellows) 7. Refer to the specifications. Review the information under each specification. Write down your choice whenever a selection is to be made. 2. Process fluid temperature 3. Maximum valve inlet pressures 4. Maximum valve pressure drops 5. Valve design (ED, YD, etc.), size, and pressure rating For New Valves 1. Refer to the valve bulletin for ordering information. 2. Also refer to the specifications. Review the information under each specification and in the referenced tables; write down your choice whenever there is a selection to be made. 5
6 Sliding Stem Live Loaded Packing Product Bulletin ENVIRO-SEAL Packing System Specifications Applicable Sliding-Stem Valve Designs and Stem Diameters See tables 1 and 2 Pressures and Temperatures (1) See bulletin 59.1:062, Packing Selection Guidelines for Sliding-Stem Valves. Construction Materials PTFE Packing Systems: Packing Ring and Lower Wiper: PTFE V-ring (2). Male and Female Adaptor Rings: Carbon-filled PTFE V-ring Optional Male and Female Adaptor Rings: Glass-filled PTFE V-ring 1 The pressure/temperature limits in this bulletin, in the valve bulletin, and any applicable code or standard limitation, should not be exceeded. 2. In vacuum service, it is not necessary to reverse the ENVIRO-SEAL PTFE packing rings. Graphite ULF Packing Systems: Packing Rings: Graphite Anti-Extrusion Washer: Filled PTFE (not required for graphite packing) Lantern Ring: S31600 (316 stainless steel) (not required for graphite packing) Packing Box Flange: S31600 Spring: N07718 Packing Follower: S31600 lined with carbon-filled PTFE Packing Box Studs: Strain-hardened 316 stainless steel Packing Box Nuts: 316 stainless steel SA194 Grade 8M HIGH-SEAL Packing System Specifications Applicable Sliding-Stem Valve Designs CL600: easy-e (1), YD, and YS CL1500: CAV4, HPD, HPS, and HPT CL2500: EHD, EHS, EHT, HPD, HPS, and HPT Applicable Stem Diameters Millimeters: 9.5, 12.7, 19.1, 25.4, 31.8, and 50.8 Inches: 3/8, 1/2, 3/4, 1, 1-1/4, and 2 Maximum Pressures and Temperatures (2) See bulletin 59.1:062, Packing Selection Guidelines for Sliding-Stem Valves. Construction Materials Packing Rings: Carbon/graphite composition, graphite, and zinc Packing Box Bushing: Graphite Packing Box Flange, Studs, and Nuts: S31600 (316 stainless steel) (other materials are available on request) Springs: S17700 (17-7 stainless steel) or N easy-e includes ED, ES, ET, EW, and EZ valves. 2. The pressure/temperature limits in this bulletin, in the valve bulletin, and any applicable code or standard limitation, should not be exceeded. 6
7 Product Bulletin Sliding Stem Live Loaded Packing Note Neither Emerson, Emerson Process Management, nor any of their affiliated entities assumes responsibility for the selection, use, or maintenance of any product. Responsibility for the selection, use, and maintenance of any product remains with the purchaser and end-user. 7
8 Sliding Stem Live Loaded Packing Product Bulletin Fisher, easy-e, and ENVIRO-SEAL are marks owned by one of the companies in the Emerson Process Management business division of Emerson Electric Co. Emerson Process Management, Emerson, and the Emerson logo are trademarks and service marks of Emerson Electric Co. All other marks are the property of their respective owners. These products may be covered by one or more of the following patents: 5,129,625; 5,131,666; 5,056,757; 5,230,498; and 5,299,812 or under pending patents. The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. All sales are governed by our terms and conditions, which are available upon request. We reserve the right to modify or improve the designs or specifications of such products at any time without notice. Neither Emerson, Emerson Process Management, nor any of their affiliated entities assumes responsibility for the selection, use or maintenance of any product. Responsibility for proper selection, use, and maintenance of any product remains solely with the purchaser and end-user. Emerson Process Management Marshalltown, Iowa USA Sorocaba, Brazil Chatham, Kent ME4 4QZ UK Dubai, United Arab Emirates Singapore Singapore Fisher 8 Controls International LLC 1991, 2009; All Rights Reserved
Fisher ENVIRO-SEAL and HIGH-SEAL Packing Systems for Sliding-Stem Valves (Live-Loaded)
Sliding-Stem Live-Loaded Packing Product Bulletin Fisher ENVIRO-SEAL and HIGH-SEAL Packing Systems for Sliding-Stem Valves (Live-Loaded) Fisher ENVIRO-SEAL and HIGH-SEAL live-loaded packing systems offer
HIGH SEAL ULF Live Loaded Packing System
Instruction Manual HIGH-SEAL Live-Loaded Packing HIGH SEAL ULF Live Loaded Packing System Contents Introduction... 1 Scope of Manual... 1 Description... 2 Spring Selection... 3 Installation... 3 Parts
Fisher EZ Sliding-Stem Control Valve
EZ Valve Product Bulletin 51.1:EZ Fisher EZ Sliding-Stem Control Valve Fisher EZ valves (figure 1) are used for throttling or on-off control of a wide variety of liquids and gases. The single-port, globe-style
Baumann 24000F Wafer Body Control Valve
24000F Valve Product Bulletin Baumann 24000F Wafer Body Control Valve The Baumann unique 24000F wafer style control valve mates with ASME and EN line flange connections and is designed to control a wide
Fisher Cavitrol III One, Two, and Three Stage Trims
Cavitrol III Trims D0096X0 Product Bulletin 80.:00 September 07 Fisher Cavitrol III One, Two, and Three Stage Trims Cavitrol III trims (figures,, and ) are used for cavitating liquid applications in various
Packing for Sliding-Stem Valves
August 1999 Bulletin 59.1:060 Packing for Sliding-Stem Valves This bulletin will guide you in selecting standard Fisher Controls valve stem packing materials and packing box arrangements. Packing materials
Fisher A11 High-Performance Butterfly Valve, NPS 30-72
A11 Valve Product Bulletin Fisher A11 igh-performance Butterfly Valve, NPS 30-72 The Fisher A11 igh-performance Butterfly Valve maintains tight shutoff, and can be specified for a wide range of pressure
Baumann 16, 32, 54, and 70 Pneumatic Actuators
Baumann Pneumatic s Product Bulletin Baumann 16, 32,, and 70 Pneumatic s Baumann actuators are single acting, pneumatic actuators with spring-return action. They are compact, multi-spring actuators with
ENVIRO-SEAL Packing System for Types A11, A31A, A31D and 8532
Instruction Manual Form 50 January 000 ENVIRO-SEAL System Butterfly Valves ENVIRO-SEAL Packing System for Types A11, A1A, A1D and 85 Contents Introduction............................... 1 Scope of Manual.............................
Run with higher performing, more versatile flow control.
Run with higher performing, more versatile flow control. Fisher easy-e Globe Valves Maximize your flow control options with these workhorses of the process control industry. You need less complexities
289 Series Spring-Loaded Relief Valves
8/9 289 Series Spring-Loaded Relief Valves W187-2 W187-2 W21-1 W29-2 1-INCH TYPE 289H AND 289HH 2-INCH TYPE 289H Figure 1. Type 289H and 289HH Relief Valves The 289 Series relief valve is a throttling
289 Series Spring-Loaded Relief Valves
89 Series Spring-Loaded Relief Valves Bulletin 71.4:89 April 1 W187_1 W1871 type 89L 1 NPT TYPEs 89H and 89HH W187 NPT TYPE 89H Figure 1. Types 89H, 89L, and 89U Relief Valves W187_ types 89U and 89A Introduction
289 Series Spring-Loaded Relief Valves
February 1 89 Series Spring-Loaded Relief Valves W187_1 W1871 TYPE 89L 1 NPT TYPES 89H AND 89HH W187 NPT TYPE 89H W187_ TYPES 89U AND 89A Figure 1. Types 89H, 89L, and 89U Relief Valves Introduction The
SAPAG. A full range of API 526 flanged safety relief valves for process applications, gas, steam and liquid. Safety Relief Valve Series 8100/8200
SAPAG A full range of API 526 flanged safety relief valves for process applications, gas, steam and liquid. Features Full compliance to API RP 520 and standards 526, 527. Certified ASME Section VIII on
brands you trust. Tufline Lined Ball Valves
brands you trust. Tufline Lined Ball Valves Materials Of Construction Part 911 &944 911XP & 944XP Valves Only Ball PFA Lined Steel or Ductile Iron PFA Lined Steel or Ductile Iron Body & Tail PFA
1301 Series High-Pressure Regulators
1301 Series High-Pressure Regulators Bulletin 71.1:1301 December 2013 P10 Figure 1. Type 1301F Regulator Features Durable Stainless Steel Diaphragm For high-outlet pressure applications. Spare Valve Disk
Ensure full compliance of your nuclear plant s air- and motor-operated valve program.
Ensure full compliance of your nuclear plant s air- and motor-operated valve program. QUIKLOOK 3-FS Valve Diagnostic System Achieve greater efficiency, improve safety, and reduce operations and maintenance
Corrosion Protection for Fisher Valves
Corrosion Protection Product Bulletin Corrosion Protection for Fisher Valves Control valves operate in some of the most severely corrosive conditions imaginable. Valves used near or on the sea are constantly
BSA3HP Bellows Sealed High Pressure Stop Valve
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Duplex Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1
87J-200 SERIES Duplex Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1 For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART (1/2 & 3/4
88A-200 Series. Carbon Steel ASME Class 150 Flanged Full Port Ball Valve -
88A-200 Series Carbon Steel ASME Class 150 Flanged Full Port Ball Valve - MATERIALS OF CONSTRUCTION Description (1/2 & 3/4 Valves) Material 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108 Type 1215 8.
Carbon Steel ASME Class 150 Flanged Std. Port Ball Valve through 2
88A-100 SERIES Carbon Steel ASME Class 150 Flanged Std. Port Ball Valve - 1.5 through 2 For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART MATERIAL 1 Body ASTM
87A-200 Series. Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1
87A-200 Series Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - MATERIALS OF CONSTRUCTION Description (1/2 & 3/4 Valves) Material 2. Retainer ASTM A276 Type 316 3. Ball ASTM A276 Type 316
87A-100 Series. Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve -
87A-100 Series Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 MATERIALS OF CONSTRUCTION Description Material 1. Body ASTM A351 CF8M 2. Retainer ASTM A276 Type 316 3. Ball
CONTROL VALVE SOURCEBOOK PULP & PAPER
CONTROL VALVE SOURCEBOOK PULP & PAPER Copyright 2011 Fisher Controls International LLC All Rights Reserved. Fisher, ENVIRO-SEAL, Whisper Trim, Cavitrol, WhisperFlo, Vee Ball, Control Disk, NotchFlo, easy
Compact CATALOG. Performance. Safety Relief Valves Series 437 Series 459. The-Safety-Valve.com
Compact Performance Safety Relief Valves Series 437 Series 459 CATALOG The-Safety-Valve.com Valve Finder Product group High operating to set pressure ratio, high backpressure or low total height? Yes High
Worcester Controls E51/52. Enviro-Safe High Integrity Flanged Ball Valves
Worcester Controls E1/2 Enviro-Safe High Integrity Flanged Ball Valves General Description With environmental protection and control established as a major issue for the future, Flowserve Worcester Controls
Sho-Rate TM Models 1250 & 1255
DS-VA-1250-55-Series-eng May, 2017 Data Sheet Sho-Rate TM Models 1250 & 1255 Sho-Rate TM 1250/55 Series Ships in 3 days Overview Product Features es Variable Area Low Flow Glass Tube Flowmeters Series
diaphragm valves DV1 Series 2-Way Diaphragm Valves Typical Applications Analytical Instrumentation Petrochemical Pharmaceutical Chemical
DV1 Series 2-Way Diaphragm Valves The DV1 Series Diaphragm Valves are totally free of springs, bellows, packing, o-rings and lubricants in the process wetted area. Metal-to-metal seals to atmosphere ensure
Mueller Gas Products. Mueller H17650 H17656 No Blo Service Stop Tee Weld x Weld 250 PSI
Mueller Gas Products Distributed by: Mountain States Pipe and Supply Colorado Springs, Colorado 80903 1 800 777 7173 Mueller H17650 H17656 No Blo Service Stop Tee Weld x Weld 250 PSI MUELLER NO-BLO FORGED
Direct contact and metal-to-metal seating make the T-pattern globe stop valve ideal for most shut-off applications.
Direct contact and metal-to-metal seating make the T-pattern globe stop valve ideal for most shut-off applications. Features Heavy integral Stellite hardfacing on both body and disc seating surfaces. Conical
MECHANICAL PACKING AND GASKET CATALOG ENVIRONMENTALLY FRIENDLY SEALING SOLUTIONS
MECHANICAL PACKING AND GASKET CATALOG ENVIRONMENTALLY FRIENDLY SEALING SOLUTIONS Valve Sealing High Performance Mechanical Packing and Gasket Catalog Valve Sealing System A complete approach to valve sealing
CROSBY H-SERIES DIRECT SPRING SAFETY VALVES
DIRECT SPRING SAFETY VALVES Direct spring safety valves that provide comprehensive overpressure protection for ASME Boiler and Pressure Vessel Code Section I, and Section VIII steam safety applications
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15761 First edition 2002-12-15 Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries Robinets-vannes, robinets à soupape
NELES TRUNNION MOUNTED, BALL VALVES, FULL BORE, SERIES X
NELES TRUNNION MOUNTED, BALL VALVES, FULL BORE, SERIES X Metso's Neles series X is a trunnion modular ball valve. Neles X series valves incorporate robust stem to ball connection. This assures valves are
Vogt Valves The Connection Bulletin for Post Weld Heat Treatment of Socket Weld Valves CB 20
The Connection Bulletin for Post Weld Heat Treatment of Socket Weld Valves CB 20 Post Weld Heat Treatment of Socket Weld Valves Flow Control Division INTRODUCTION Some manufacturing and user construction
Cash Valve. Type C-776. ASME Section VIII Air/Gas and Cryogenic, UV National Board Certified Safety Valve. Flow Control
Cash Valve Type C-776 ASME Section VIII Air/Gas and Cryogenic, UV National Board Certified Safety Valve Issued - April 2000 CAVMC-0515-US-1202 ISO 9001 Certified Flow Control Type C-776 - Cryogenic Safety
D1 Series Multi-hole Cage Guided Control Valves
D1 Series Multi-hole Cage Guided Control Valves Model D1M Overview Model D1M globe control valves are with bolted bonnet and multi-hole cage guided trims. The design facilitates easy access to internal
CONNECTION BULLETIN. Vogt Valves. Experience In Motion. Post Weld Heat Treatment of Socket Weld Valves. FCD VVABR /05 (Replaces CB-20)
CONNECTION BULLETIN Vogt Valves Post Weld Heat Treatment of Socket Weld Valves FCD VVABR1020-00 01/05 (Replaces CB-20) Experience In Motion Post Weld Heat Treatment of Socket Weld Valves Introduction Some
D-1 FIRE PROTECTION PRODUCTS TAPPING VALVE. MUELLER Tapping Valves. MUELLER Tapping Sleeves and Crosses. MUELLER Stainless Steel Tapping Sleeves
TAPPING VALVE MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including cast iron, ductile iron, A-C, and cast iron O.D. PVC--Also outlet sealed
packless valves Packless Valves Index Bellows & Diaphragm
Packless Valves Bellows & Diaphragm Index 0300 Series (Bellows) 1 4100 Series (Bellows) 4 4200 Series (Bellows) 8 4500 Series (Bellows) 11 4600 Series (Diaphragm) 13 DV1 Series (Diaphragm) 17 HOKE PO Box
WOUTER WITZEL EUROVALVE. Dynaxe Setting The Standard Wouter Witzel EuroValve double eccentric high performance butterfly valve
Dynaxe Setting The Standard Wouter Witzel EuroValve double eccentric high performance butterfly valve 2 WOUTER WITZEL EUROVALVE Dynaxe sets the new standard for double-offset butterfly valves. It is the
Cryogenic Metal Seated Butterfly Valves
Cryogenic Metal Seated Butterfly Valves The Key to Cryogenic Valve Solutions VELAN S.A.S VELAN Inc Group VELAN inc is one of the world's leading independent manufacturer of steel gate, globe, check, butterfly
Pressure Regulators K Series
Pressure Regulators K Series 1 www.swagelok.com Pressure Regulators K Series Pressure-reducing models Back-pressure models Gas cylinder changeover model Vaporizing models 2 Pressure Regulators and Filters
1 Are you spending too much to transport air? The total expense of distributing air from your compressors to its point of use involves more than just the cost of piping. It also includes labor-intensive
KTM METALTITE BALL VALVES FLOATING AND TRUNNION TYPE
Metaltite metal seated ball valves have excellent sealing characteristics suitable for various fluids services with a wide range of operating temperatures FEATURES GENERAL APPLICATION Clean fluids, dirty
Kerotest/Marsh Needle Valves Series N
Series N Kerotest/Marsh N Series Needle Valves are used in processing plants, oil and gas production, hydraulic and pneumatic equipment, testing labs anywhere the flow of fluid must be carefully regulated.
Engineering Data Pack HD Industrial Duty Pumps
Engineering Data Pack HD Industrial Duty Pumps Version. Excellence at work. Excellence in life. Table of Contents 0A Pump Mounting Dimensions 0A Pump Mounting Dimensions with Flanged Ports Flanged Port
DIVISION: METALS SECTION: METAL FASTENINGS REPORT HOLDER: HILTI, INC DALLAS PARKWAY, SUITE 1000 PLANO, TEXAS 75024
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 42 6587 (562) 699 054 www.icc es.org ESR 247 Reissued 2/207 This report is subject to renewal 2/209. DIVISION: 05 00 00 METALS
Worcester 5 Series. BS 5351 Approved Flanged Ball Valves
Worcester 5 Series S 5351 pproved Flanged all Valves Flowserve Worcester is proud to announce the introduction of its new 519/529 range of ball valves which replaces the DN 15 - sizes of the proven Series
ISO INTERNATIONAL STANDARD. Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries
INTERNATIONAL STANDARD ISO 10434 Second edition 2004-07-15 Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries Robinets-vannes en acier à chapeau boulonné pour les industries
ARI-STEVI 440 / 441 (DN15-250) Control valve - straight through With pneumatic and electric actuators
ARI-STEVI 4 / 441 (DN15-0) Control valve - straight through With pneumatic and electric actuators ARI-STEVI 4 / 441 Pneumatic actuator ARI-DP 32-34 Tri Reversible pneumatic actuator Actuator with rolling
McCANNA Ball Valves for Purified Terephthalic Acid Services
flowserve.com McCANNA Ball Valves for Purified Terephthalic Acid Services Experience In Motion 1 McCANNASEAL Valves Meet the Challenges of Purified Terephthalic Acid (PTA) Processes With its vast experience
Flange Insulation Sets
Insulation sets are used to limit corrosion in pipeline systems. Where dissimilar metals are present, the sets remove the possibility of the system acting as a galvanic cell and reduce the risk of galvanic
PRESSURE REGULATORS. GAS LOW PRESSURE PRESSURE REDUCING STEEL.5 oz - 20 psig OPER. PRES.
1527 (2.5 lbs. Std.) Spring 3061 (5 lbs. Opt.) 4379 (20 lbs. Opt.) Stem 2913 * Gasket 1216 Diaphragm Plate 1208 * Diaphragm 1212 Screw 236, 10 Req d. Nipple 648 Gauge 4080 Tee 219 * Diaphragm 110 * Seat
8mm - 50mm (1/4-2 ) api 602 bs asme b16.34 mss sp 84
L&T FORGED STEEL GATE, GLOE & CHECK VALVES ASME 150-2500 8mm - 50mm (1/4-2 ) api 602 bs 5352 S 6364 asme b16.34 mss sp 84 Introduction L&T Forged Steel Gate, Globe and Check Valves have established themselves
Valbart Through Conduit Slab Gate Valve (TCSGV)
Valbart Through Conduit Slab Gate Valve (TCSGV) The Oil and Gas Industry s Choice for Liquid and Gas Applications Experience In Motion Flowserve Solutions to Keep You Flowing Flowserve is one of the world
Product Bulletin 2K-3.2. stamixco. mix it up..
stamixco Product Bulletin 2K-3.2 mix it up.. 2-Component Resin Mixing Technology Plastic Disposable & Metal Static Mixers for Mixing Viscous Materials 2 Introduction For more than 40 years, static mixers
ball valves Ultramite 70 Series Fixed End 2- and 3-way Ball Valves
Fixed End 2- and 3-way Ball Valves Ultramite 70 Series valves are designed to guard against accidental disassembly. The tamper-proof fixed end fittings are welded in place, with the exception of the 7065
CHEMICAL /4" 3/8" to 5/8" /8" 3/4" to 1-1/4" 1 10
194 ASTM A193 GRADE B7 HIGH-STRENGTH CARBON, ZINC PLATED (ASTM B 633 YELLOW DICHROMATE) B7 (AISI 414) anchor rod is supplied with nuts meeting the requirements of ASTM Specification A 194, Grade 2H (ASTM
DM/..., DC/95000, DM/..., DC/96000
D/..., DC/95000, D/..., DC/96000 Compact cylinders Single acting Ø 12 to 50 mm ight weight Compact design, which is considerably shorter than IS/VD or NF equivalent. ow friction characteristics for high
UL / FM D-1 FIRE PROTECTION PRODUCTS TAPPING VALVE. MUELLER Tapping Sleeves and Crosses. MUELLER Tapping Valves
UL / FM TAPPING VALVE SECTION Rev. 2-15 MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including cast iron, ductile iron, A-C, and cast iron O.D.
12.1 MUELLER TAPPING MATERIALS AND SPECIALTY VALVES. MUELLER Tapping Sleeves and Crosses. MUELLER Tapping Valves. MUELLER Stainless Steel Tapping
MUELLER TAPPING MATERIALS AND SPECIALTY VALVES 12.1 Shaded area indicates change Rev. 7-16 MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including
Standards are finally approved by the Standards High Council of Iranian Ministry of Petroleum.
FOREWORD This Standard is intended to be used within and for Iranian Ministry of Petroleum (N.I.O.C, N.I.G.C, N.P.C., N.I.O.R.D.C. and other affiliate organizations and companies) and has been prepared
EZ LOADER. Bishamon. EZ Loaders are true ergonomic tools. in every sense of the word. They are. designed to eliminate worker bending
EZ LOADER A U T O M A T I C P A L L E T P O S I T I O N E R EZ Loaders are true ergonomic tools in every sense of the word. They are designed to eliminate worker bending by automatically raising and lowering
special male. Bronze 3-Piece Full Port Ball Valve With Male Brazed Extensions
82-200 special male Bronze 3-Piece Full Port Ball Valve With Male Brazed Extensions Solder end, 600 CWP (psig), Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Designed for soft
Rosemount 405 Compact Orifice Primary Element
Rosemount 405 Compact Orifice Primary Element SPECIFICATIONS Performance Discharge Coefficient Uncertainty TABLE 20. 405 Compact Orifice Primary Element Type 405C (Conditioning Compact) 405P (1)(2) (Standard
Edward Valves. Asbestos-Free Stem Packing for High Temperature Valves. V-Rep 82-1
Edward Valves Asbestos-Free Stem Packing for High Temperature Valves V-Rep 82-1 By R. L. Schweitzer, Supervisory Development Engineer, Flow Control Division and D. A. Goodman, Former Development Engineer,
Section 20. Globe Valves
Section 20 A globe valve is a type of valve used for regulating flow in a pipeline, consisting of a movable disk-type element and a stationary ring seat in a generally spherical body. Globe valves are
Regulating valves REG 6-65, REG-SS 15-40
MAKING MODERN LIVING POSSIBLE Technical brochure Regulating valves REG 6-65, REG-SS 15-40 REG are angle-way and straight-way regulating valves, which act as normal stop valves in closed position. The valves
Sabrorazi (Technymon Polymers Divis.)
Sliding Bearings Foreword Mongodi Group started up in 975 as a small owned family company specialized in the production of sliding bearings. Thanks to the strong attachment to the business and to all the
Ugitech Stainless steel solutions for the oil and gas industry
Ugitech Stainless steel solutions for the oil and gas industry 02 Stainless steel solutions for the oil and gas industry Ugitech and the Oil and Gas industry The world s conventional oil reserves are seriously
Cast Steel Bolted Bonnet Stop Check Valves Sizes: 2 thru 14 Pressure Class: 150 thru 1500
ast Steel olted onnet Stop heck Valves Sizes: 2 thru 14 Pressure lass: 150 thru 1500 Manufactured by Newmans 45 Newco ast arbon Steel olted onnet Valves Typical Newco ast Steel olted onnet Stop heck Valve
Air-Operated Double Diaphragm Pumps
Air-Operated Double Diaphragm Pumps FIRST IN QUALITY Total Quality Management is ingrained in the Iwaki Air brand of Air-Operated Double Diaphragm (AODD) pumps, which are manufactured under stringent ISO
Seals with boundless possibilities!
European Seals Seals with boundless possibilities! Seals with boundless possibilities! ERIKS bv, the Netherlands ERIKS European Seals From Alkmaar, the Netherlands, ERIKS bv supplies technical components
Light Bases & Light Fixtures
Light Bases & Light Fixtures Keeping Them Together Clamping Force/Preload Force Torque Bolt Specifications Corrosion Galling 18-8 Disadvantages EB-83 bolts 2 Clamping Force = Preload Force 3 Fastener acts
NELES TOP ENTRY, ROTARY CONTROL VALVE, SERIES TOP 5
NELES TOP ENTRY, ROTRY CONTROL VLVE, SERIES TOP 5 Metso's Neles T5 series top entry rotary ball valves are designed to meet the requirements of chemical, petro-chemical and refining industries with improved
SECTION HIGH DENSITY POLYETHYLENE PIPE AND FITTINGS (PRESSURE PIPE)
SECTION 02623 HIGH DENSITY POLYETHYLENE PIPE AND FITTINGS (PRESSURE PIPE) PART 1 - GENERAL 1.1 SCOPE OF WORK A. Furnish all labor, materials, equipment and incidentals required and install high density
Industrial Self-Lubricating Bearings World Leader in Self-Lubricating Liner Systems
Metric Industrial Self-Lubricating Bearings World Leader in Self-Lubricating Liner Systems +1 (714) 841-3007 www.rbcbearings.com sales@rbcbearings.com Version No. 101 Last Revised: 03/19/2015 SELF-LUBRICATING
Crude Oil and Refined Products Processing
Crude Oil and Refined Products Processing High Performance Ball Valves for Severe Service Applications Experience in Motion Application Know-How For more than 60 years Argus has delivered high performance
COMBINATION AIR VALVE
MINING DIVISION COMBINATION AIR VALVE FOR HIGH FLOW D-6NS SERIES DESCRIPTION The D-6NS Series Combination Air Valve has the features of both an air release valve and an air & vacuum valve. The air release
1/2 2-1/2 (DN 15 65) STANDARD PORT AND 1/2 2 (DN 15 50) FULL PORT SERIES 4000 BALL VALVES Threaded End Socket Weld Butt Weld
1/ -1/ (DN 1 ) STANDARD PORT AND 1/ (DN 1 ) FULL PORT SERIES 000 BALL VALVES Threaded End Socket Weld Butt Weld The JAMESBURY Series 000 ball valves offer the three most desirable attributes of high-quality
Richter Bellows-sealed Globe Control Valves
Richter Bellows-sealed Globe Control Valves RSS NEW: Size DN 50/6 Corrosion-resistant PFA lining ISO/DIN and ANSI/ISA face-to-face Heavy-duty bellows Special designs for chlorine and high-purity media
M-CLASS. Metal seated ball valves
M-CLASS Metal seated ball valves Lockable tee-handle, gearbox and actuated options Patented tripod mounting bracket with ISO 5211 option for simple and precise actuator mounting Oversized stem to prevent
Section 3 Fusible PVC Pipe Connections
3.0 Fusible PVC pipe is joined together using butt-fusion joints, however, it may be necessary to utilize other connections to integrate Fusible PVC pipe sections into an overall pipe system. There are
PUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps...
PUMPS FOR INDUSTRY CONTENTS: The Vertical Pump Specialists Introduction & User List Product Overview Vertical Process Pumps... Series 600 Vertical Sewage Pumps... Series 700 Vertical Sump Pumps... Vertical
DIVISION: MASONRY SECTION: MASONRY ANCHORS REPORT HOLDER: HILTI, INC DALLAS PARKWAY, SUITE 1000 PLANO, TEXAS 75024
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 587 (52) 99 0543 www.icc es.org ESR 393 Reissued 12/2017 This report is subject to renewal 12/2018. DIVISION: 04 00 00 MASONRY
KNIFE GATE & SLURRY VALVE PRODUCT GUIDE
KNIFE GATE & SLURRY VALVE PRODUCT GUIDE BRAY.COM Contents Series 700 Page Series 740 Bidirectional Knife Valve 4 Series 745 Bidirectional Slurry Valve 4 Series 746 Bidirectional Slurry Valve 5 Series 752
SUGGESTED SPECIFICATIONS Pump Frames through 64132
TYPE HBB - HORIZONTAL SOLIDS-HANDLING WASTEWATER PUMPS Pump Frames 44081 through 64132 GENERAL Furnish and install Horizontal Flexible Coupled Dry Pit Pumping Units complete with all accessories and appurtenances
All Prospective Bidders. SUBJECT: Addendum #2. DATE: April 8, Huntley High School Athletic Field Improvements Bid Release #2
TO: All Prospective Bidders SUBJECT: Addendum #2 DATE: April 8, 2013 PROJECT: Huntley High School Athletic Field Improvements Bid Release #2 OWNER: Consolidated School District #158 Algonquin, IL CONSTRUCTION
ULTRALIFT DEEPWATER GAS-LIFT SYSTEMS
PRODUCTION ULTRALIFT DEEPWATER GAS-LIFT SYSTEMS Enhance production and improve completion integrity in the most extreme environment DRILLING & FORMATION EVALUATION WELL CONSTRUCTION COMPLETION & STIMULATION
www.polyvalveusa.com 1 Why use Polyvalve Poly-Gas Valves? Polyvalve Poly-Gas valves are everything you d expect from the company that invented polyethylene valves. Millions of Polyvalve Poly-Gas valves
Metering Valves. S, M, L, and 31 Series. Straight-pattern flow coefficients (C v ) from to Low- and high-pressure service
Metering Valves S, M, L, and 1 www.swagelok.com Metering Valves S, M, L, and Straight-pattern flow coefficients (C v ) from 0.004 to 0.16 Low- and high-pressure service Repeatable vernier handles available
Model and 2 Heavy-Duty Regulator. Regulator Features: Regulator Specifications:
Model 5600 1 and 2 Heavy-Duty Regulator The Model 5600 is a spring-loaded, self-operated pressure regulator, available in 1 and 2 sizes and built to withstand the most difficult processes and environments.
d n g a n a ck a tio cia lica Filters ctio 3 S ctio n n 3 T ctio 2 S ctio 2 T ctio 1 S d C ctio 1 T d C ria 904L rie e S Ordering Number Description
B-16 B-16 FT, FB, FI and FW B-163 Filtration Definitions Sintered element: metal powder (alloys are available) is pressed in a die at sufficient pressure that the powder particles adhere at their contact
Rosemount 1154 Alphaline Nuclear Pressure Transmitter
Product Data Sheet 00813-0100-4514 Rev BA Rosemount 1154 Rosemount 1154 Alphaline Nuclear Pressure Transmitter INDUSTRY LEADING PERFORMANCE Qualified per IEEE Std. 323-1974 and IEEE Std. 344-1975 1.1 10
GROUP. special. Mechanical Transmissions on Demand. ingranaggi
Mechanical Transmissions on Demand GROUP special ingranaggi A solid and flexible company GROUP special ingranaggi MECHANICAL TRANSMISSIONS ON DEMAND Since 1999 we are the recognised leaders in the manufacture
Available End Connections & Size Range
ECCENTRIC PLUG VALVES Size Range 3"-24" Water Working Hydrostatic Size Range Pressure psi Test psi 3"-12" 175 350 14"-24" 150 300 Available End Connections & Size Range Figure No. Flanged 3"-24" F-5412
VALVE PRODUCT OVERVIEW
WATER MANAGEMENT VALVE PRODUCT OVERVIEW WATER MANAGEMENT Double Eccentric BFV DEX Main Specification Double Eccentric BFV DEX Model Body Disc Shaft Retaining ring Internal bolts External bolts Bearing
ECLIPSE. NSF/ANSI 61* *Non-metallic Only EXTERNAL GEAR PUMP ENGINEERED PRODUCTS. Flow: up to 33 gpm (125 lpm)
ECLIPSE EXTERNAL GEAR PUMP Flow: up to 33 gpm (125 lpm) Differential Pressure: up to 15 psi (1.3 bar) Working Pressure: up to 3 psi (2.7 bar) Temperature: from -4 to 45 F (-4 to 232 C) Viscosity: up to