d n g a n a ck a tio cia lica Filters ctio 3 S ctio n n 3 T ctio 2 S ctio 2 T ctio 1 S d C ctio 1 T d C ria 904L rie e S Ordering Number Description
|
|
- Laura Underwood
- 6 years ago
- Views:
Transcription
1 B-16
2 B-16 FT, FB, FI and FW
3 B-163 Filtration Definitions Sintered element: metal powder (alloys are available) is pressed in a die at sufficient pressure that the powder particles adhere at their contact points. Strainer element: the strainer is cup-shaped and includes an inner cup-shaped support structure having staggered perforations extending through the surfaces thereof, an outer cup-shaped strainer structure constructed of wire mesh is closely received over the support structure. nominal pore size: the element nominal pore size is normally calculated from the pressure required to cause air to bubble from the largest pore in the filter element when submerged in a test liquid. Features Tee-type FT Filter element replaceable without removing body from system Union bonnet design Nominal pore sizes for sintered element: 0.5,,, 15, 0, 60 and 0 μm Nominal pore sizes for strainer element:, 150, 50 and 50 μm Working pressure up to: 6000 psig (1 bar) Working temperature: -0 F to 900 F (- C to C) Body materials: 316 SS, 316L SS, 30 SS, 30L SS, 90L SS and Brass Variety of end connections available Bypass FB Bypass port at filter bottom for the ease of sampling or purging Union bonnet design Nominal pore sizes for sintered element: 0.5,,, 15, 0, 60 and 0 μm Nominal pore sizes for strainer element:, 150, 50 and 50 μm Working pressure up to: 6000 psig (1 bar) Working temperature: -0 F to 900 F (- C to C) Body materials: 316 SS, 316L SS, 30 SS, 30L SS, 90L SS and Brass Variety of end connections available In-line FI Compact and space-saving design Nominal pore sizes for sintered element: 0.5,,, 15, 0, 60 and 0 μm Nominal pore sizes for strainer element:, 150, 50 and 50 μm Working pressure up to: 3000 psig (0 bar) Working temperature: -0 F to 900 F (- C to C) Body materials: 316 SS, 316L SS, 30 SS, 30L SS, 31 SS, 90L SS and Brass Variety of end connections available ll-welded In-line FW Large filtration area and high flow coefficient ll-welded construction for elimination of leakage Easy cleaning of filters by backflushing Full-penetration weld between body and filter element Nominal pore sizes for sintered element: 0.5 μm Nominal pore sizes for strainer element:,, 15 and 0 μm Working pressure up to: 6000 psig (1 bar) Working temperature: -0 F to 900 F (- C to C) Body materials: 316 SS, 316L SS, 30 SS, 30L SS and 90L SS Variety of end connections available
4 B-16 Pressure vs. Temperature Temperature ( C) FT, FB, FW 316 SS Pressure (psig) FI 316 SS FT, FB Brass Pressure (bar) FI Brass Temperature ( F) Contact FITOK Group or our authorized distributors for curve graph of other materials. FT FB FI FW 1 1 Inlet Inlet Bypass port Inlet 3 1 Inlet 1 Standard Materials of Construction Component 316 SS Material Grade/STM Specification Brass 1 Body F316 SS/1 (FT, FB ), 316 SS/9 (FI, FW ) Brass C300/B3 (FT, FB ) Brass C36000/B16 (FI ) 3 Gasket Spring Sintered 316 SS or strainer 316 SS 316 SS/9 with PTFE/D110 coating or silver-plated 30 SS/313 Sintered 316 SS or strainer 316 SS PTFE/D110 or aluminum/b09 30 SS/313 5 Bonnet Nut 316 SS/9 C36000/B16 6 Backup Ring Stainless steel Bonnet 316 SS/9 C36000/B16 1. FW filters not available in brass. Lubricants: molybdenum disulfide-based and silicone-based o o Maximum Differential Pressure of Clean Filter at 0 F (0 C) FT, FB, FI FW 0.5 micron micron micron 15 micron 50 (155.) 600 (1.) 50 (155.) (6.9) 1950 (13.5) (6.9) 150 (10.) (6.9) Maximum Differential Pressure psig (bar) 0 micron 60 micron 0 micron micron 150 micron 50 micron 50 micron 1150 (9.3) 1150 (9.3) (69.0) (69.0) (69.0) (69.0) (69.0)
5 B-165 Filter s Filter elements remove 95 % of particles larger than the nominal pore size. Nominal Pore Size μm Pore Size Range μm 0.5 to 1 to 5 to to 5 35 to to 5 0 to 95 Type Sintered Sintered or Strainer Strainer Filtration rea FT, FB FT, FB 6FT, 6FB FT, FB FI FI 6FI FI FW Orifice in. (mm) 0.09 (.0) 0.1 (.) 0.1 (5.) 0.5 (6.) 0.09 (.) 0.19 (.) 0. (.1) 0.1 (10.3) 0.19 (.) Filtration rea in. (mm ) Sintered 1.30 (30) 1.30 (30).00 (10).00 (10) 0.55 (350) 1.30 (30).00 (10).00 (10) Strainer 1.00 (60) 1.00 (60) 1.0 (1090) 1.0 (1090) 1.00 (60) 1.0 (1090) 1.0 (1090) 0.39 (5) 0.39 (5)
6 B-166 Dimensions FT o 5 D C B E F Hex Mounting Holes M5 X H Threads 0.5 (6. mm) Deep Basic Ordering Number Connection Type and Size Filter Dimensions, in. (mm) Inlet B C D E F FT -FL- FT -FL- 1/" FITOK 1/" FITOK 1/" FITOK 1/" FITOK FT FT. (5.). (6.) 0.3 (9.) 1.9 (3.) 1.00 (5.) 1.00 (5.) 1 (5.) FT -FL6- FT -FL- 3/" FITOK 1/'' FITOK 3/" FITOK 1/'' FITOK FT FT. (.1) 3.0 (.) 0.6 (11.) 1. (.) 1.13 (.) 1.13 (.) 1 1/ (.6) FT -ML6- FT.6 (6.5) 0.3 (9.) 1.9 (3.) 1.00 (5.) 1.00 (5.) 1 (5.) FT -ML- mm FITOK mm FITOK FT. (.1) FT -ML10-10 mm FITOK 10 mm FITOK FT.6 (.6) 0.6 (11.) 1. (.) 1.13 (.) 1.13 (.) 1 1/ (.6) FT -ML1-1 mm FITOK 1 mm FITOK FT 3.0 (.) FT -TS- 1/" TS 1/" TS FT FT -TS6- FT -TB- 3/" TS 1/" TB 3/" TS 1/" TB FT FT 1.6 (.) FT -TB6-3/" TB 3/" TB FT 0.3 (9.) 1.9 (3.) 1.00 (5.) 1.00 (5.) 1 (5.) FT -FNS- 1/ Female NPT 1/ Female NPT FT.00 (50.) FT -FNS- FT -NS- 1/ Female NPT 1/ Male NPT 1/ Female NPT 1/ Male NPT FT FT.13 (5.1) FT -NS6- FT -NS- 3/ Male NPT 1/ Male NPT 3/ Male NPT 1/ Male NPT FT FT.3 (60.5).5 (69.9) 0.6 (11.) 1. (.) 1.13 (.) 1.13 (.) 1 1/ (.6) FT -FR- 1/ Male FR 1/ Male FR FT.30 (5.) 0.3 (9.) 1.9 (3.) 1.00 (5.) 1.00 (5.) 1 (5.) FT -FR- 1/ Male FR 1/ Male FR FT.55 (6.) 0.6 (11.) 1. (.) 1.13 (.) 1.13 (.) 1 1/ (.6) Mounting holes not available with 1/ female NPT end connections
7 B-16 FB o 5 D C E B F Hex Bypass Port Mounting Holes M5 X H Threads 0.5 (6. mm) Deep Basic Ordering Number Connection Type and Size Inlet Filter Dimensions, in. (mm) B C D E F Bypass Port FB -FL- FB -FL- 1/'' FITOK 1/'' FITOK 1/'' FITOK 1/'' FITOK FB FB. (5.). (6.) 1.9 (50.) 0.3 (9.). (61.9) 1.00 (5.) 1.00 (5.) 1 (5.) FL FL FB -FL6- FB -FL- 3/'' FITOK 1/'' FITOK 3/'' FITOK 1/'' FITOK FB FB. (.1) 3.0 (.). (69.1) 0.6 (11.).96 (.) 1.13 (.) 1.13 (.) 1 1/ (.6) FL6 FL FB -ML6- FB.6 (6.5) 0.3 (9.). (61.9) 1.00 (5.) 1.00 (5.) 1 (5.) FL FB -ML- mm FITOK mm FITOK FB. (.1). (69.1) FL6 FB -ML10- FB -ML1-10 mm FITOK 1 mm FITOK 10 mm FITOK 1 mm FITOK FB FB.6 (.6) 3.0 (.) 0.6 (11.).96 (.) 1.13 (.) 1.13 (.) 1 1/ (.6) FL FB -TS- 1/'' TS 1/'' TS FB FB -TS6- FB -TB- 3/'' TS 1/'' TB 3/'' TS 1/'' TB FB FB 1.6 (.) 1.3 (56.) TB FB -TB6-3/'' TB 3/'' TB FB 0.3 (9.) 1.00 (5.) 1.00 (5.) 1 (5.) FB -FNS- 1/ Female NPT 1/ Female NPT FB.00 (50.) FB -FNS- FB -NS- 1/ Female NPT 1/ Male NPT 1/ Female NPT 1/ Male NPT FB FB.13 (5.1) 1.1 (3.) FNS FB -NS6- FB -NS- 3/ Male NPT 1/ Male NPT 3/ Male NPT 1/ Male NPT FB FB.3 (60.5).5 (69.9) 0.6 (11.).00 (50.) 1.13 (.) 1.13 (.) 1 1/ (.6) FB -FR- 1/ Male FR 1/ Male FR FB.3 (60.5) 0.3 (9.). (61.9) 1.00 (5.) 1.00 (5.) 1 (5.) FL FB -FR- 1/ Male FR 1/ Male FR FB.5 (69.9) 0.6 (11.).96 (.) 1.13 (.) 1.13 (.) 1 1/ (.6) FL Mounting holes not available with 1/ female NPT end connections
8 B-16 FI F Hex Basic Ordering Number Connection Type and Size Dimensions Filter in. (mm) Inlet F FI -FL- 1/'' FITOK 1/'' FITOK FI.35 (59.) 9/16 (1.3) FI -FL- 1/'' FITOK 1/'' FITOK FI.95 (.9) 3/ (19.1) FI -FL6- FI -FL- 3/'' FITOK 1/'' FITOK 3/'' FITOK 1/'' FITOK FI FI 3.1 (1.5) 3.9 (.6) 1 (5.) F Hex FI -ML3-3 mm FITOK 3 mm FITOK FI.3 (60.5) 9/16 (1.3) FI -ML6- FI.96 (5.) 3/ (19.1) FI -FNS- 1/ Female NPT 1/ Female NPT FI.16 (5.9) 9/16 (1.3) FI -FNS- 1/ Female NPT 1/ Female NPT FI. (.9) 3/ (19.1) FI -NS- FI -NS- 1/ Male NPT 1/ Male NPT 1/ Male NPT 1/ Male NPT FI FI 1. (.).69 (6.3) 9/16 (1.3) FI -FR- FI -FR- 1/ Male FR 1/ Male FR 1/ Male FR 1/ Male FR FI FI.9 (0.) 3/ (19.1) FI -FRT- 1/ Female BSPT 1/ Female BSPT FI.16 (5.9) 9/16 (1.3) FI -FRT- 1/ Female BSPT 1/ Female BSPT FI. (.9) 3/ (19.1) FI -RT- 1/ Male BSPT 1/ Male BSPT FI 1. (.) 9/16 (1.3) FI -RT- 1/ Male BSPT 1/ Male BSPT FI.69 (6.3) 3/ (19.1) FW F Hex Basic Ordering Number Connection Type and Size Dimensions Orifice in. (mm) in. (mm) Inlet F FW -FL- FW -ML6-1/'' FITOK 1/'' FITOK 0.19 (.5).15 (5.6) FW -FNS- 1/ Female NPT 1/ Female NPT 0.5 (11.5) 1.5 (39.9) 1 (5.) FW -NS- 1/ Male NPT 1/ Male NPT 0. (.1) 1.9 (.0) FW -FR- 1/ Male FR 1/ Male FR 0.19 (.5).0 (51.) 1. FITOK means FITOK double ferrule tube fittings, FR means metal gasket seal fittings, TS means fractional tube socket weld, TB means fractional tube butt weld.. Sizes and types listed are standard. Other sizes and types are available upon request. 3. Dimensions are shown with FITOK nuts finger-tightened. ll dimensions are for reference only and are subject to change. For dimensions not shown above, please contact FITOK Group or our authorized distributors.
9 B-169 Ordering Number Description FBSS - FL - ML10 - S -P FLSF Body Material Inlet Type Inlet Size Type Size Type Gasket Material Nominal Pore Size Bypass Port (for FB Only) Special pplication Cleaning and Packaging FT FB FI FW SS 316 SS 6L S L 316L SS 30 SS 30L SS S1 31 SS B Brass 90L 90L SS FNS NS FRT RT FMS MS FRP BP FL ML TS TB Female NPT Male NPT Female BSPT Male BSPT Female Metric Thread (for RP) Male Metric Thread (for RG) Female BSPP (for RP) Male BSPP (for RG) Fractional Tube Fitting Metric Tube Fitting Fractional Tube Socket Weld Fractional Tube Butt Weld /" 1/" 3/ " or 6 mm 1/ " or mm 10 mm 3/ " or 1 mm Same as Inlet Specified in the same way as the inlet type and size S Sintered Strainer Silver-plated 316 SS for FT, FB, FI P PTFE-plated 316 SS for FT, FB, FI luminum for FT, FB, FI (the only option for brass body) W No-plated 316 SS for FT, FB, FI μm (Sintered) μm μm 15 μ m 0 μ m 60 μ m 0 μ m μ m 150 μ m 50 μ m 50 μ m Note: "Ordering Number Description" is a reference to understand the combination rules of FITOK product part number. Not all combinations are available. FL FL TS FL6 FL 1/ Female NPT 1/ " Fractional Tube Fitting 1/ " Fractional Tube Fitting 1/ " Tube Socket Weld 3/" Fractional Tube Fitting 1/" Fractional Tube Fitting S No NCE MR015 F FC-01 FC-0 FR Male FR Fitting 1. Standard thread pitch for metric threads are as follows: M and below: mm M o M mm t : 1.5 M and above: mm Standard thread pitch should be ignored in the ordering number, others should be specified.. Cleaning and Packaging: FC-01 Standard cleaning and packaging for basic industrial procedures. FC-0 Special cleaning and packaging for wetted system components to ensure compliance requirement as stated in STM G93 Level C.
10 B-10 s Ordering Number Description SSE-SN-60 Material Part Name Type Nominal Pore Size SS 316 SS E SN Sintered ST Strainer (only for sintered) μm (sintered) μm μm μm 0 0 μm Note: "Ordering Number Description" is a reference to understand the combination rules of FITOK product part number. Not all combinations are available μm 0 μm μm 150 μm 50 μm 50 μm
11 FITOK Group FITOK GmbH (Headquarter) Sprendlinger Landstr. 115, Offenbach am Main, Germany Tel.: Fax: FITOK, Inc. 133 North Promenade Blvd., Suite 50, Stafford, Texas, US Tel.: Fax: FITOK Incorporated Block C, Zone E, Yingtai lndustrial Park, Dalang Street, Longhua New District, Shenzhen, 51109, China Tel.: Fax: FITOK Middle East Oil Equipment Trading LLC 0-09, Makateb Building, irport Road, P.O.Box 151, Deira, Dubai, UE Tel.: Fax: info@fitokgroup.com FK-IC-GV-13-EN-101
High Pressure Relief Valves
High Pressure Relief Valves HSR Series, 0,000 psi ( bar) Series, 0,000 psi ( bar) HAR Series, 0,000 psi ( bar) ITOK roup ITOK mbh (Headquarter) Sprendlinger Landstr., 0 Offenbach am Main, ermany Tel.:
More informationGrease Fittings and Bleed Fittings
Grease ittings and Bleed ittings VCG Series, VCG Series, PI Series, PI Series and BV Series ITOK Group ITOK GmbH (Headquarter) Sprendlinger andstr. 5, 09 Offenbach am Main, Germany Tel.: +9 9 900 9 ax:
More informationTubing and Pipes.
Tubing and Pipes FITOK Group FITOK GmbH (Headquarter) Sprendlinger Landstr., 9 Offenbach am Main, Germany Tel.: +49 9 900 449 Fax: +49 9 900 449 FITOK, Inc. 4 North Promenade Blvd., Suite 70, Stafford,
More informationThermowells and Bosses
Thermowells and osses TW, TS, T, TJ and S Series ITOK Group ITOK GmbH (Headquarter) Sprendlinger Landstr. 115, 63069 Offenbach am Main, Germany Tel.: +9 69 8900 98 ax: +9 69 8900 95 ITOK, Inc. 1383 North
More informationPressure Regulators K Series
www.swagelok.com Pressure Regulators K Series Pressure-reducing models Back-pressure models Gas cylinder changeover model Vaporizing models Pressure Regulators, K Series 2 Swagelok K Series Pressure Regulator
More informationPressure Regulators K Series
Pressure Regulators K Series 1 www.swagelok.com Pressure Regulators K Series Pressure-reducing models Back-pressure models Gas cylinder changeover model Vaporizing models 2 Pressure Regulators and Filters
More informationMetering Valves. S, M, L, and 31 Series. Straight-pattern flow coefficients (C v ) from to Low- and high-pressure service
Metering Valves S, M, L, and 1 www.swagelok.com Metering Valves S, M, L, and Straight-pattern flow coefficients (C v ) from 0.004 to 0.16 Low- and high-pressure service Repeatable vernier handles available
More informationdiaphragm valves DV1 Series 2-Way Diaphragm Valves Typical Applications Analytical Instrumentation Petrochemical Pharmaceutical Chemical
DV1 Series 2-Way Diaphragm Valves The DV1 Series Diaphragm Valves are totally free of springs, bellows, packing, o-rings and lubricants in the process wetted area. Metal-to-metal seals to atmosphere ensure
More informationPre s sure Re gulators
www.swagelok.com Pre s sure Re gulators Pressure-reducing models Back-pressure models Gas cylinder changeover model Vaporizing models Pressure Regulators Swagelok Pressure Regulator Features Stem Fine-pitch
More informationSanitary Pressure Regulators RHPS Series
www.swagelok.com Sanitary Pressure Regulators RHPS Series Pressure-reducing regulators and tank blanketing regulators 316L stainless steel construction 1/2, 1, and 1 1/2 in. end connections Working pressures
More information1071 Cast Steel Globe Steam Stop Valve (Flanged)
1071 Cast Steel Globe Steam Stop Valve (Flanged) Flanged Ends to DIN 2545 PN 40. Straight Pattern, Outside Screw, Yoke Type, Rising Stem, Bolted Bonnet. Renewable 13% Cr. Stainless Steel (S.S 410) working
More informationPressure Regulators Pressure-reducing models Back-pressure models Gas cylinder changeover model Vaporizing models
www.swagelok.com Pressure Regulators Pressure-reducing models Back-pressure models Gas cylinder changeover model Vaporizing models Pressure Regulators 2 Swagelok Pressure Regulator Features Stem Fine-pitch
More information1,500 PSIG STAINLESS STEEL HOUSINGS
The 1 and 140 series of filters are ideal for use with gaseous and liquid sample process analyzers, as well as other demanding applications. The small internal volume, compact design, and positive O-ring
More informationStainless Steel Products Products for use in offshore, instrumentation, and compatiblity applications.
Section 16 Stainless Steel Products Products for use in offshore, instrumentation, and compatiblity applications. Contents F22 General Purpose Stainless Steel Filter 1/2" Port Size....................................LE-16-2
More informationClean Gas Filter. SF Series. Cartridge Type/Disposable Type IDFA IDFB IDH ID IDG IDK AMG AFF AM AMD AMH AME AMF ZFC SF SFD LLB AD GD SFC10
Clean Gas Filter Series Cartridge Type/Disposable Type Disposable type C0 Disposable type B30 Cartridge type 0 20 30 H HW T U B K MG FF M MD MH ME MF ZFC LLB D Cartridge type B0 B20 295 SMC Clean Gas Filter
More informationpackless valves Packless Valves Index Bellows & Diaphragm
Packless Valves Bellows & Diaphragm Index 0300 Series (Bellows) 1 4100 Series (Bellows) 4 4200 Series (Bellows) 8 4500 Series (Bellows) 11 4600 Series (Diaphragm) 13 DV1 Series (Diaphragm) 17 HOKE PO Box
More informationSERIES AK 1400T SINGLE STAGE PRESSURE REGULATOR TIED DIAPHRAGM SAFETY AND RELIABILITY
SERIES AK 1400T SINGLE STAGE PRESSURE REGULATOR TIED DIAPHRAGM SAFETY AND RELIABILITY Flow capacity* 200 sccm to 500 slpm (0.007 to 17.6 scfm) Vacuum to 2,300 psig (158 bar) inlet, 100 psig (7 bar) outlet
More informationPACK YOUR OWN CAPILLARIES FOR HPLC AND MASS SPEC
PACK YOUR OWN CAPILLARIES FOR HPLC AND MASS SPEC Pack micro-columns of various length and diameter Compact design will not tip on the work surface Seals safely at pressures up to 9000 psi * Assembles simply,
More informationFittings, Materials and Tubing Guide. Instrumentation Products
Fittings, s and Tubing Guide Fittings, s and Tubing Guide Instrumentation Products Single/Double Ferrule Instrument CPI / A-LOK Tube Fittings Introduction Parker CPI / A-LOK Instrumentation Tube Fittings
More informationdiaphragm valves Diaphragm Valves
Diaphragm Valves Index Safety Warning Inside Front Cover 2-way Diaphragm Valves Pneumatic Actuated Valves 4 DV Series- How to Order Matrix 7 Disclaimers Inside Back Cover GO Regulator PO Box 4866 Spartanburg,
More informationSeries SFA100/200/300
Cartridge Type/Disc Style Series SF00/200/300 Precision filtration for general gases used in the electronic industry, etc. Compressed air, Nitrogen, etc. PTFE membrane element is made into a cartridge.
More informationSevere-Service Union-Bonnet Needle Valves Special Alloy Materials
www.swagelok.com Severe-Service Union-Bonnet Needle Valves Special Alloy Materials N Series and HN Series Working pressures up to 10 000 psig (689 bar) Temperatures from 65 to 450 F ( 53 to 232 C) with
More informationInstruction Manual. Pressure Relief Valve. PRV22 (All Models) PRV16 (All Models)
Pressure Relief Valve PRV22 (All Models) PRV6 (All Models) Page 2 of 20 Issue: 4.0 General Description The Binks mechanical Pressure Relief Valve offers a practical solution for the prevention of Smart
More informationdiaphragm valves Diaphragm Valves Index DV1 Series 1 2-way diaphragm valve DV3 Series 8 3-way diaphragm valves
Diaphragm Valves Index DV1 Series 1 2-way diaphragm valve DV3 Series 8 3-way diaphragm valves GO Regulator 405 Centura Court PO Box 4866 (29305) Spartanburg, SC 29303 Phone (864) 574-7966 Fax (864) 574-5608
More informationDP Series Low Pressure Pneumatic Diaphragm Valves 316L SS/ASTM A479. Machine finished. FC-01 Standard Cleaning and Packaging
iaphragm Valves iaphragm Valves V-0 P Series ow Pressure Pneumatic iaphragm Valves Features Minimum particle generation and dead space Fully contained seat to provide excellent resistance to swelling and
More informationWALCOOM. Walcoom Corporation SINTERED MESH.
WALCOOM Walcoom Corporation "A good solution for water treatment and gas filtration" Walcoom Corporation has been offering the strong and durable sintered mesh products for 20 years. We are specialized
More informationTrading LLC. QUALITY IS OUR BASIC STRATEGY FOR SURVIVAL AND FUTURE GROWTH
Trading LLC. QUALITY IS OUR BASIC STRATEGY FOR SURVIVAL AND FUTURE GROWTH ABOUT US In the Middle East as well as in any major economy, Oil and Gas, Power and Water are among the core sectors. In the Emirates,
More informationPACKLESS VALVES. Instrument/Analyzer Products. Catalog 4515/USA April 2003
PACKLESS VALVES Instrument/Analyzer Products Catalog 4515/USA April 2003 PACKLESS VALVES Instrument/Analyzer Products Catalog 4515/USA April 2003 table of contents NV55........................ 1-2 Nova
More informationACCESSORIES LS/520, LC/520 Heavy duty non-return valves 1/ LT1000 Block form flow regulators (uni-directional) 1/8 & 1/4
ESSORIES LT000 lock form flow regulators (uni-directional) /8 & /4 LT00 lock form flow regulators (bi-directional) /8 & /4 LT70 Quick exhaust valves /8 & /4 LS/50, L/50 Heavy duty non-return valves /4...
More informationDH Series High Pressure Springless Diaphragm Valves. Special Cleaning and Packaging 316L SS/ASTM A479. Machine finished
V-9 iaphragm Valves iaphragm Valves s Valves & Regulators H Series High Pressure Springless iaphragm Valves Features Metal-to-metal diaphragm seal Elgiloy diaphragm to provide high strength and corrosion
More informationP630 HIGH FLOW GAS REGULATOR
P60 HIGH FLOW GAS REGULATOR P60 HIGH FLOW GAS REGULATOR Stainless Steel Internals are Standard Steel Units comply with NACE MR0 Durable Powder Coated Exterior Wide Range of Flow Capacities The P60 is a
More informationThis specification describes the minimum requirements for piping systems for the following service:
1.0 APPLICATION 1/8 This specification describes the minimum requirements for piping systems for the following service: Gland Water Design Condition Operating Conditions 50 PSIG @ 150 F 0 to 5 PSIG @ 35
More information289 Series Spring-Loaded Relief Valves
February 1 89 Series Spring-Loaded Relief Valves W187_1 W1871 TYPE 89L 1 NPT TYPES 89H AND 89HH W187 NPT TYPE 89H W187_ TYPES 89U AND 89A Figure 1. Types 89H, 89L, and 89U Relief Valves Introduction The
More informationJSRLFLP Series. Sanitary Valves JSRLFLP Series Low FlowLow Pressure Gas Reducing Valves
JSRLFLP Series Pressure Reducing Valves for Low Flow and Low Pressure Biopharmaceutical and Parenteral process Gas JSRLFLP is a high purity low flow, regulator designed and built specifically for very
More informationSinterflo. Sintered Metal Filter Cartridges and Elements. World Class Filtration Solutions
Sinterflo Sintered Metal Filter Cartridges and Elements World Class Filtration Solutions Sinterflo Sintered Metal Filter Cartridges and Elements Porvair Filtration Group Porvair Filtration Group is an
More informationCONOFLOW HIGH-PRESSURE REGULATOR - HP500 Pressure Reducing - Diaphragm Type - High Purity
CONOFLOW HIGH-PRESSURE REGULATOR - HP500 Pressure Reducing - Diaphragm Type - High Purity The HP500 Regulator is a self-contained, diaphragm sensing high purity regulator. A broad offering of materials
More informationStandard Screens. Sizes, Materials and Pressure Ratings. How To Order BT150SS P. BF-Cast Iron. BF-Stainless Steel.
n Ounce of Prevention is Worth the Price of a Strainer! HRT INDUSTRIL BSKET STRINERS are used to protect sensitive downstream equipment from damage and premature wear by removing unwanted solids from process
More informationIR4015 Stainless Steel High Pressure Regulator, Internally Threadless Design Regulator
IR4015 Stainless Steel High Pressure Regulator, Internally Threadless Design Regulator Customer Value Proposition: Parker Hannifin Corporation s Veriflo Division presents the IR4000 Series internally threadless
More informationMODEL LP 225LP2 225LP4 Safety Relief Valves
Edition GDRV.06 BRYAN DONKIN RMG CANADA LIMITED Serving the Gas Industry WORLDWIDE Applications Specifically designed to protect the downstream system or equipment from over pressure conditions by discharging
More informationMaterials : Carbon steel or Stainless steel MERXTRADE BV.
ADE B.V. Size : DN 1/4 to DN 2 Ends : Threaded female BSP, NPT or S.W. Min Temperature : - 30 C in S.S. and - 20 C in carbon steel Max Temperature : + 180 C Max Pressure : 138 Bars (Class 800) Specifications
More informationSuper Duplex Stainless Steel Ball Valve with Mounting Pad 1/4-1
76K-100-A SERIES Super Duplex Stainless Steel Ball Valve with Mounting Pad 1/4-1 Female NPT Thread, 2000 CWP (psig). Cold Non-Shock. (See referenced P/T chart) 150 psig Saturated Steam. Vacuum Service
More informationPARTS & ACCESSORIES: EATON DUPLEX BASKET STRAINERS FEATURES OPTIONS MODEL 53BTX DUPLEX (3/4 TO 4 ) MODEL 50 DUPLEX (5, 6, 8 )
PARTS & ACCESSORIES: MODEL BTX & 0 Section 64 Page 64. Issue E FEATURES MODEL BTX DUPLEX (/4 TO 4 ) Dynamic sealing design for long life Easy-to-operate lever handle no gear box required Unique seat and
More informationDAJA. Contents. Description Page Description Page. Lok to Male Thread. Introduction. Technical Specifications. (MC) Male Connector
Contents Description Page Description Page Introduction 0 Lok to Male 2 Technical Specifications How to Order lokdj Compression Fittings (UU) Union (CU) Conversion Union (RU) Conversion Union (BHU) Bulkhead
More informationHigh Pressure Filter Assemblies
High Pressure Filter Assemblies Up to 20,000 PSI (1378 bar) All stainless steel construction Stainless steel metal felt filter elements High Pressure T-Type Filter Assemblies Greater service life than
More information289 Series Spring-Loaded Relief Valves
89 Series Spring-Loaded Relief Valves Bulletin 71.4:89 April 1 W187_1 W1871 type 89L 1 NPT TYPEs 89H and 89HH W187 NPT TYPE 89H Figure 1. Types 89H, 89L, and 89U Relief Valves W187_ types 89U and 89A Introduction
More informationP133 Pressure Regulator
P33 Pressure Regulator Suitable for Monitoring Balanced Supply Valve Wide Pressure Range Offering The P33 is a direct operated pressure reducing regulator used in commercial and industrial applications
More informationASME Code Filter Vessels Compressed Air & Gas Filtration
SME ode Filter Vessels ompressed ir & Gas Filtration Large apacity SME Vessels Finite's filter vessels eliminate oil, water, and particulate contamination from large flows of compressed air and gas. Finite
More informationEngineering Excellence
Energy Saving Compressed Air Filters NGF SERIES 20 to 1500 scfm (34 to 2459 nm 3 /h) Engineering Excellence SPX is a place where innovation is valued, and the real needs of business are understood. We
More informationBall Float Steam Trap UNA 45, UNA 46, UNA 46A PN 40/Class 300 DN 15, 20, 25, 40, 50, 65
Data Sheet 819345-02 Issue Date: 06/16 all Float Steam Trap UNA 45, UNA 46, UNA 46A PN 40/Class 300, 20, 25, 40, 50, 65 UNA 45 hl, UNA 46 hl, UNA 46A hl UNA 45 hl UNA 45 hl Description Float traps type
More informationThe Filterautomat. Our Filter Systems Protect. The New Definition of Purity for Your Medium. flow rate 5 m 3 /h to 4,000 m 3 /h. filter fineness 5 µm
GB Filterautomat The New Definition of Purity for Your Medium Our Filter Systems Protect The Filterautomat Cooling Water River Water Plate Heat Exchangers Spray Nozzles Sea Water Sinter and Scale Separation
More informationCONA -Universal / CONA -Connector
CONA -Universal for quick assembly/disassembly on CONA -Connector or foreign system connectors CONA -Universal / CONA -Connector CONA B-Universal Bimetallic steam trap (BR 604) BR 604 Page CONA M-Universal
More informationInstrumentation Process Analyzer Condensed Catalog Regulators, Valves, Flow Controllers, Changeover Systems & Cylinder Connections
Instrumentation Process Analyzer Condensed Catalog Regulators, Valves, Flow Controllers, Changeover Systems & Cylinder Connections Veriflo Table of Contents REGULATORS Regulator Porting Guide...3 Single
More information07 SWIVEL JOINTS 268
07 7.01 The Range STRAIGHT SWIVEL JOINT Size : 1/2 to Working Pressure : 250 psi Page 270 90 SWIVEL JOINT Size : 1/2 to Working Pressure : 250 psi Page 271 FLANGED SWIVEL JOINT Size : 1/2 to Working Pressure
More informationANDERSON GREENWOOD OS&Y GAUGE VALVES SERIES M5K/M5AK/M5YK
SERIES M5K/M5AK/M5YK Root isolation valves with outside screw and yoke, bolted bonnet construction for pressures up to 6, psi (414 barg) FEATURES M5YK GENERAL APPLICATION M5K-L M5K series gauge valves
More information* Approximate flow at 90 psig (6.3 bar) inlet pressure and 5 psig (0.35 bar) pressure drop. F07 FLOW CHARACTERISTICS
ir line equipment F7 iniature Series 7 eneral Purpose Filter 1/" and 1/" s Compact design Protects air operated devices by removing liquid and solid contaminants Screw-on bowl reduces maintenance time
More informationDiaphragm seal with threaded connection Threaded design Model
Pressure Diaphragm seal with threaded connection Threaded design Model 990.10 WIKA data sheet DS 99.01 for further approvals see page 6 Applications For aggressive, hot, corrosive, environmentally hazardous
More informationSolid stream nozzles. Cleaning High pressure cleaning Jet cutting Recycling of liquids and many others...
Cleaning High pressure cleaning Jet cutting Recycling of liquids and many others... 109 Thanks to optimum flow geometries, Lechler solid stream nozzles produce compact, solid stream jets of defined lengths.
More information12D SERIES THREE SCREW PUMPS ROTARY SCREW PUMPS
TM 12D SERIES THREE SCREW PUMPS ROTARY SCREW PUMPS The reliable pump people Performance Shown at 2000 PSID (138 BAR), 200 SSU (43 CST) 60 HZ: 870 1150 1750 3500 *Bi-metal construction only 50 HZ: 960 1450
More informationThe specialist for tube and hose fittings in stainless steel / 316Ti. Make better connections!
The specialist for tube and hose fittings in stainless steel.57 / 6Ti Make better connections! www.volz.de We ve got everything you need. What we don t have, we can make for you.»00% traceability is second
More informationALPHAIR PNEUMATIC ACTUATORS EXTERNAL ADJUSTMENT NEW "RE"SERIES
ALPHAIR PNEUMATIC ACTUATORS EXTERNAL ADJUSTMENT NEW "RE"SERIES The new series of ALPHAIR Pneumatic Actuators with special External Adjustment system meets every quality and precision requirement. The new
More informationTechnical Data Body Construction Materials Aluminum, brass, steel, 303 or 316 stainless steel O-ring Materials
200 Series 0 to 3000 psig heck Valves H200 Series 0 to 6000 psig heck Valves Features & enefits Quick opening/positive closing Provides a wide range of adaptability Large flow capacity The patented sealing
More information1301 Series High-Pressure Regulators
1301 Series High-Pressure Regulators Bulletin 71.1:1301 December 2013 P10 Figure 1. Type 1301F Regulator Features Durable Stainless Steel Diaphragm For high-outlet pressure applications. Spare Valve Disk
More informationClass 125S/200WOG Bronze Gate Valve Non-Rising Stem, Threaded Ends Testing: BS EN 12288, BS 5154, BS EN Working Pressure: PN16
Class 125S/200WOG Bronze Gate Valve Non-Rising Stem, Threaded Ends Testing: BS EN 12288, BS 5154, BS EN 12266 Working Pressure: PN16 FIG. 201 WORKING PRESSURE Working Pressure Non-Shock (psi) Saturated
More informationASME Code Filter Vessels
SME ode Filter Vessels ompressed ir & Gas Filtration Large apacity SME Vessels Finite's fi lter vessels eliminate oil, water, and particulate contamination from large fl ows of compressed air and gas.
More informationProcess Interface Valves
www.swagelok.com Process Interface s Kenmac Series Process Interface s and Process Monoflanges Stainless steel, carbon steel, and duplex stainless steel materials Pressure ratings in accordance with ASME
More informationSuction Filter - SE. Working Temperature From -25 to +110 C. Materials. Aluminium alloy Spin-on cartridge: Steel Bypass valve: Polyammide
COMPONENTS Pressure (ISO 077-:00) Max working:, MPa ( bar) Test:,5 MPa (5 bar) Bursting:,5 MPa (5 bar) Collapse, differential for the filter element (ISO 9): 00 kpa ( bar) Bypass Valve Setting: 5 kpa (0,5
More informationP133 Pressure Regulator
P33 Pressure Regulator Suitable for Monitoring Balanced Supply Valve Wide Pressure Range Offering The P33 is a direct operated pressure reducing regulator with external pressure registration used in commercial
More informationº to 150º F In accordance with this specification and
SPEC-3006 2016/0/18 1/10 1.0 PURPOSE This specification describes the minimum requirements gland water piping systems operating at or below 400 PSIG. Gland water systems are to be constructed either of
More informationType 431, 433 PN 160. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 431, 433 PN 160 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.03-E 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle
More informationANDERSON GREENWOOD H1 HAND VALVES
Large bore, ⅜ (9.5 mm) diameter orifice, general purpose soft-seated hand valve for pressures to 6000 psig (414 barg) FEATURES GENERAL APPLICATION A general purpose, soft-seated hand valve designed for
More informationYARWAY HANCOCK CONTINUOUS BLOWDOWN GLOBE VALVE SERIES 5505
Advanced construction features of this high pressure drop angle globe valve provide quality and long service life. FEATURES GENERAL APPLICATION In addition to continuous blowdown service, the Yarway high
More informationPressure transducers DMU 02 Vario (flush)
Process engineering (flush) Ideal for hygienic processes Connection technology with numerous versions Extremely resistant to shock, pulsation and vibration Best dynamic pressure resistance at high load
More informationSolid stream nozzles. Cleaning High pressure cleaning Jet cutting Recycling of liquids and many others...
Cleaning High pressure cleaning Jet cutting Recycling of liquids and many others... Thanks to optimum flow geometries, Lechler solid stream nozzles produce compact, solid stream jets of defined lengths.
More informationM15 ISO Ball Valve DN¼" to DN2½"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationVESSEL & REACTOR VALVES. VD Series DISC VALVES PROCESS VALVES
VD Series VESSEL & REACTOR VALVES DISC VALVES PROCESS VALVES FULL FLOW BOTTOM OUTLET VALVES Tank Bottom Disc Valve M Ring for high temperature & vacuum. Other sealing systems are available Code: VD4R-VD6R
More informationApollo Flow Controls A SERIES ALLOY-20 BALL VALVE 1/4-1
399-100-A SERIES ALLOY-20 BALL VALVE 1/4-1 Female NPT Thread, 2000 CWP (psig). Cold Non-Shock. (See referenced P/T chart) 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. FEATURES Investment cast
More informationPRESSURE REGULATORS. GUIDE to REGULATORS and SERVO VALVES
Master Pneumatic regulators are made in a wide range of sizes to suit nearly all industrial requirements for pneumatic pressure regulation. Good pressure regulation is essential to the efficient use of
More informationSCREEN FILTERS IRRIGATION EQUIPMENT LTD. SERIES APPLICATIONS
IRRIGATION EQUIPMENT LTD. SCREEN W A T E R FILTERS SERIES 1900 APPLICATIONS Specially designed as a single Control Filter after gravel/sand filter arrays. Used as an economic and compact Secondary Filter
More informationAir Filters, Regulators & Lubricators
RO-Flo For more than years, Ingersoll Rand RO has been an industry leader in the design and manufacture of compressors, pneumatic tools, and air preparation equipment. Clean air is a key ingredient that
More informationBULLETIN MARCH 2009 POWERRAC CYLINDER ACTUATORS TECHNICAL SPECIFICATIONS
BULLETIN 74.00-2 MARCH 2009 POWERRAC CYLINDER ACTUATORS TECHNICAL SPECIFICATIONS Materials of Construction B21 R1A & R2A B9D B9E B9G B9H B9F B15 B14 B11 B10 B12 B13 B9C B7 B9A B6 B5 B9B B8 B22 B2 B20 B19
More informationPENBERTHY SERIES 100 AND 200 STRAIGHT PATTERN FLAT GLASS GAGECOCKS
Straight pattern gagecocks that provide a 90 connection to the process vessel and isolate the gage chamber from the liquid content of the vessel FEATURES Straight pattern. Integral bonnet (100 series).
More informationMATERIALS OF CONSTRUCTION
HIGH PRESSURE PURIFIER (MODEL SG6140) Model SG6140 purifier is designed to remove water and/or oil from gas or liquid streams. In the laboratory, it protects delicate or sensitive instruments, prolongs
More informationPENBERTHY SERIES 300 AND 400 OFFSET PATTERN FLAT GLASS GAGECOCKS
Offset pattern gagecocks that provide a 90 connection to the process vessel and isolate the gage chamber from the liquid content of the vessel FEATURES Offset pattern allows easy cleaning. Integral bonnet
More informationWater Cooled Oil Cooler
Water Cooled Oil Cooler HOW Series Iron particle type: HOWF series FH Copper particle type: HOW series HOW Series Heat transfer area (Inside pipe) (m ) Heat exchange (kw) Flow rate (L/min) Oil side side
More informationC-BV-0812 Catalog C-BV-0812 A h e A d O f t h e f l O w B a l l Va l v e s
catalog C-bV-0812 ahead of the flow Ball Valves Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves demands that new products and services
More informationIron Check Valves & Y-Strainers Illustrated Index
Iron Check Valves & Y-Strainers Illustrated Index Iron Body Swing Check Valve Bronze Mounted or All Iron 125 lb. SWP 200 lb. CWP Iron Body Swing Check Valve Bronze Mounted 250 lb. SWP 500 lb. CWP Lead
More informationAir Regulators. Type 10. Type 110. Type 40. Type 41. Type 50. Type 50 NACE. Type 51. Type 51SS. Type 60. Type 65. Type 70. Type 70BP. Type 77.
Air Regulators Type 10 Type 110 Type 40 Type 41 Type 50 Type 50 NACE Type 51 Type 51SS Type 60 Type 65 Type 70 Type 70BP Type 77 Type 78 Type 91 Type 92 www.marshbellofram.com 800.727.5646 1 Type 10 Pressure
More informationJSRLFLP Series. Sanitary Valves JSRLFLP Series Low FlowLow Pressure Gas Reducing Valves
JSRLFLP Series Pressure Reducing Valves for Low Flow and Low Pressure Biopharmaceutical and Parenteral process Gas JSRLFLP is a high purity low flow, regulator designed and built specifically for very
More informationBALL VALVES SUPERIOR BALL VALVES WA SERIES (WELDED) WA Series Ball Valve. WAS Series Ball Valve (With Access Fitting)
BALL VALVES SUPERIOR BALL VALVES WA SERIES (WELDED) WAS Series (Welded with Access Fittings) Full Refrigeration Service Temperature Range of -40 F to +325 F. Forged Brass Body and Seal Cap. Design Working
More informationC-BV-0413 Catalog C-BV-0413 A h e A d O f t h e f l O w B a l l Va l v e s
catalog C-bV-0413 ahead of the flow Ball Valves Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves demands that new products and services
More informationHIEX High-Expansion Foam Generators
DATA SHEET HIEX High-Expansion Foam Generators Features UL Listed and CE Marked FM Approved models available LNG specific models available Water-powered so no electrical power is required Foam capacities
More informationVarec 3500B, 3600B and 3650B Series Weight Loaded Vacuum or Pressure Relief Valves. 3500B Series
Varec 00B, 00B and 0B Series Weight Loaded or Pressure Relief Valves The 00B, 00B and 0B vacuum breakers are designed to provide superior seat tightness while protecting liquid storage vessels, vapor recovery
More informationPaper type solvent filter Cartridge type solvent filter In-line filter. Uniform fiber diameter of 1 µm. Minimized deviation in particle size.
Sintered Stainless Steel Fiber Filters For precision filtration of fluids Paper type solvent filter Cartridge type solvent filter In-line filter Features: Higher efficiency and precision than the filtration
More informationASTM Standards B127 B160 B161 B162 B163 B164 B165 B166 B167 B168 B333 B335 B407 B408 B409 B423
ASTM Standards : B127 Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, B160 Specification for Nickel Rod and Bar B161 Specification for Nickel Seamless Pipe and Tube B162 Specification
More informationParticulate Filters. Filter Function. Exclusive Dense Pack Element Design. Optional Components
Particulate ilters Inlet Outlet Monnier particulate filters remove solid and liquid contaminants from compressed air. The proper selection and use of compressed air filters will prevent many short and
More information3 Piece Ball Valve Line
3 Piece Ball Valve Line This image cannot currently be displayed. 3 Piece Ball Valve Features Tight Shut-off, ANSI/FCI CL VI Variety of end connections Swing Out for servicing Fire Tested API 607 available
More informationC-BV-0918 AHEAD OF THE FLOW. Ball Valves
C-BV-0918 AHEAD OF THE FLOW Ball Valves Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves demands that new products and services be continuously
More informationStainless Steel Ultra High Pressure Housings
Stainless Steel Ultra High Pressure Housings Our standard stainless steel filter series is also offered at, and 0 PSIG ratings to cover virtually every possible gas and liquid application. These units
More informationEngineered Swivel Joints for Special Applications
Engineered Joints for Special pplications EW Fuel Management Ltd 27 Kneesworth Street, Royston, Hertfordshire, SG8 5B. England. Tel : + 44 (0) 1763 248 650 Fax : +44 (0) 1763 248 970 Email : sales@ewfm.co.uk
More informationball valves Ultramite 70 Series Fixed End 2- and 3-way Ball Valves
Fixed End 2- and 3-way Ball Valves Ultramite 70 Series valves are designed to guard against accidental disassembly. The tamper-proof fixed end fittings are welded in place, with the exception of the 7065
More information