PRIMAL SF % ACRYLIC POLYMER FOR INTERIOR AND EXTERIOR PAINTS

Transcription

1 100% ACRYLIC POLYMER FOR INTERIOR AND EXTERIOR PAINTS SUMMARY acrylic emulsion has been designed for the formulation of environmentally friendly, low odour, interior wall paints. It has exceptional pigment binding capacity which permits formulation of flat wall paints at high pigment volume concentration while maintaining good scrub resistance. Thus, Primal SF-016 can be formulated economically in solvent free flat paints compared to competitive technologies. High PVC wall paints based on exhibit excellent wet colour rub, particularly observable in deep tones, which further distinguish it from other solvent free products and allow the formulation of superior coatings. In addition, allows the manufacture of interior sheen paints with good resistance to block and dirt pick up. Its all acrylic composition permits use in exterior coatings for mineral substrates such as masonry and on wood. Environmental Properties: Film formation without the need for coalescents and solvents Ammonia free Formaldehyde free Alkyl phenol ethoxylate free Low residual monomer levels and low odour Characteristics of the Product: High pigment binding capacity affording economical interior wall paints Excellent mechanical stability under high shear conditions Excellent scrub resistance Easy removal of stains Exterior durability Typical Physical Properties (Not to be used as specifications) Solids Content % ph Viscosity (Brookfield LV spindle 3 at 60rpm) <500 mpa.s Minimum Film Formation Temperature 1 C /

2 FORMULATIONS SOFT SHEEN PAINT Formulation SS-16-1 Ingredients Kilograms Litres Level Grind Orotan 963 (47%) Kathon LX 1.5% Nopco NXZ AMP % Disp Ti-Pure R % PVC Durcal % PVC Talc AT % PVC Acrysol RM-12W % PVC Grind Sub-Total Letdown Ammonia (28%) Acrysol DR-73 Acrysol DR Total: % PVC Levels without Additives: % Density % Solvent 0.026% VOC 0.49 Dispersant 0.75% Levels with Additives: % % /

3 INTERIOR FLAT PAINT Formulation IF-16-1 Ingredients Kilograms Litres Level Grind Orotan 731N Natrosol 250 MHR (2.5%) Kathon LX 1.5% Tego Foamex 1495 KOH 1M Triton CF % Disp Tioxide TR % PVC Talc AT % PVC P % PVC Durcal % PVC Grind Sub-Total Letdown Acrysol RM-2020 Acrysol TT % PVC Total: % PVC Levels without Additives: % Density % Solvent 0.026% VOC 0.49 Dispersant 1.00% Levels with Additives: % % /

4 EXTERIOR FLAT MASONRY PAINT Formulation EM-16-50/OP Natrosol 250 MR One molar KOH Orotan 731 Byk 035 Ingredients Kilograms Litres Level Acrysol SCT % PVC Tioxide TR % PVC Talc AT % PVC Durcal % PVC Calibrite SL % PVC Byk 035 Texanol Skane M Total: % PVC Levels without Additives: % Density % Solvent 0.009% VOC 29.8 g/l Dispersant 1.000% Coalescent 3.000% Levels with Additives: % % Other Measurements: ph KU ICI 8.5 > /

5 INTERIOR SILK PAINT FORMULATION BASED ON PRIMAL SF-016 Formulation IS-16-1 Orotan 963 Byk 024 Aqueous ammonia Tioxide TR-92 Durcal 2 Kathon LX 1.5% Aqueous ammonia Acrysol DR-73 Acrysol DR-72 Ingredients Parts by Weight Total: PROPERTIES Viscosity at equilibrium Gel strength 5 ICI cone and plate 1.2 Krebs Stormer (KU) 106 Brookfield (spindle 4, 6 rpm) Syneresis No % 30.0 % 39.5 PVC % 30.0 Density 1.20 Scrub resistance (cycles at 50% weight loss) /

6 SOFT SHEEN PAINT FORMULATION BASED ON PRIMAL SF-016 Formulation SS-16-2 Ingredients Parts by Weight 80.0 Byk Orotan NaOH (20%) 9.6 Tioxide TR Micro Mica Kathon LX 1.5% 1.6 Densil P Acrysol DR Total: PROPERTIES Viscosity at equilibrium ICI cone and plate Krebs Stormer (KU) Brookfield (spindle 4, 6 rpm) % 38.5 % 50.5 PVC % 35.8 Density 1.24 Gloss Gloss Scrub (abrasive - cycles at 50% weight loss) /

7 NOTES /

8 ROHM AND HAAS IN EUROPE AUSTRIA Rohm and Haas Austria Ges.m.b.H Diefenbachgasse A-1150 Vienna Austria Tel: 43 (0) Fax: 43 (0) BENELUX Rohm and Haas Belgium N.V. Ankerrui 9 B-2000 Antwerpen Belgium Tel: 32 (0) Fax: 32 (0) SAFE HANDLING INFORMATION Rohm and Haas Company maintains comprehensive and up-to-date material safety data sheets (MSDS) on all of its products. These sheets contain pertinent information that you may need to protect your employees and customers against any known health or safety hazards associated with our products. Rohm and Haas Company recommends that you obtain copies of our material safety data sheets from your local Rohm and Haas representative on each of our products prior to its use in your facilities. We also suggest that you contact your supplier of other materials recommended for use with our products for appropriate health and safety precautions prior to their use. FRANCE Rohm and Haas France S.A.S. La Tour de Lyon 185, rue de Bercy F Paris Cedex 12 France Tel: 33 (0) Fax: 33 (0) ITALY Rohm and Haas Italia S.r.l. Via Trieste 25 I Mozzate (CO) Italy Tel: Fax: SWEDEN Rohm and Haas Nordiska A.B. Osterleden 165, Box 45 S Landskrona Sweden Tel: 46 (0) Fax: 46 (0) ROHM AND HAAS EUROPEAN LABORATORIES 371, rue Ludwig van Beethoven Sophia Antipolis F Valbonne Cedex France Tel: 33 (0) Fax: 33 (0) GERMANY Rohm and Haas Deutschland GmbH In der Kron 4 D Frankfurt Germany Tel: 49 (0) Fax: 49 (0) SPAIN Rohm and Haas España S.a. Provenza 216, 3rd Floor E Barcelona Spain Tel: 34 (0) Fax: 34 (0) UNITED KINGDOM Rohm and Haas (UK) Limited Lennig House 2 Mason's Avenue Croydon CR9 3NB United Kingdom Tel: 44 (0) Fax: 44 (0) Rohm and Haas website: These suggestions and data are based on information we believe to be reliable. They are offered in good faith, but without guarantee, as conditions and methods of use of our products are beyond our control. We recommend that the prospective user determines the suitability of our materials and suggestions before adopting them on a commercial scale. Suggestions for uses of our products or the inclusion of descriptive material from patents and the citation of specific patents in this publication should not be understood as recommending the use of our products in violation of any patent or as permission or license to use any patents of the Rohm and Haas Company. Subsidiaries of Rohm and Haas Company, Philadelphia, USA Acrysol, Drycryl, Elastene, Fastrack, Maincote, Orotan, Paraloid, Primal, Ropaque, Rovace and Skane are trademarks of Rohm and Haas Company, Philadelphia, USA 2001 Rohm and Haas Company, Philadelphia, USA /