Invisi II Dual Flush/Single Flush Inwall/Under Counter/Induct/Inceiling Cistern. CI/SfB (74.4) n6 Date October 2014

Size: px

Start display at page:

Download "Invisi II Dual Flush/Single Flush Inwall/Under Counter/Induct/Inceiling Cistern. CI/SfB (74.4) n6 Date October 2014"

Valerie Harvey
5 years ago
Views:

The more CI/SfB (74.4) n6 Date October 2014 Invisi II Dual Flush/Single Flush Inwall/Under Counter/Induct/Inceiling Cistern Supersedes all previous issues 6.15.

1 The more CI/SfB (74.4) n6 Date October 2014 Invisi II Dual Flush/Single Flush Inwall/Under Counter/Induct/Inceiling Cistern Supersedes all previous issues The more stars the more water efficient WATER RATING A joint government and industry program Licence No Water Consumption 1.8 litres per flush per stall When tested in accordance with Standard AS/NZS 6400 For more information and to compare products, refer to: stars the more water efficient WATER RATING A joint government and industry program Licence No litres per full flush litres per half flush 3.5 litres per average flush When tested in accordance with Standard AS/NZS 6400 For more information and to compare products, refer to:

Invisi II Invisi II 4.5/3 Dual Flush Inwall/Under Counter/ Induct/Inceiling Installation 1.8 Single Flush Urinal Inwall/Induct/Inceiling Installations Shown with D.

2 Invisi II Invisi II 4.5/3 Dual Flush Inwall/Under Counter/ Induct/Inceiling Installation 1.8 Single Flush Urinal Inwall/Induct/Inceiling Installations Shown with D.403 Invisi II Wall Hung Pan Bracket and Invisi Dual Flush Plate and Buttons. A 4.5/3 litre dual flush plastic cistern suitable for inwall, under counter, induct and inceiling applications. The cistern features a number of contemporary button design options with concealed fixing that are pneumatically operated for ease of operation and installation. The push can be activated remotely up to 4 metres from the cistern, ideal for care and custom applications. The cistern incorporates Caroma Smartflush water saving technology. For installation flexibility the cistern, bracket and specially designed waste pipe have been developed to be installed in a standard 90mm metal or timber stud wall applications. The cistern is adjustable to 6/3 litre dual flush. Extended pneumatic hoses are additional and separately Code No Alternatively the extended hose is also with the Remote Access Mounting Box kit Code No Invisi II Dual Flush Installations: Inwall The cistern can be fitted within a minimum cavity of 90mm with service access within the room via the standard or large button panel. A range of access panel kits are available to suit dual flush, single flush and remote push button positions. Under Counter The cistern can be fitted under counter with a minimum cavity depth of 90mm for front mount button installations and 100mm from the finished wall face to the counter's internal front face, for top mount button installations, as illustrated in Invisi II page 4 (not suitable for urinals). Induct The cistern is suitable for behind the wall installations in a single service duct, as illustrated Invisi II page 6. Inceiling The cistern is suitable for mounting in the ceiling duct where access is provided for adjustment and servicing. This installation requires the fabrication of a flush pipe using 40mm DWV and Flush Pipe Extension components contained in the Remote Mounting Box Kit Code No , as illustrated Invisi II pages 7 and 9. Due to the high head height only nominated Caroma boxed rim pans should be used with this installation. Invisi II Buttons Buttons and access plate are not included with the cistern, see Invisi II page 3 for available options. Invisi II Inwall/Under Counter/Induct/Inceiling Cistern For wall faced pan applications, Code No For wall faced pan installations the cistern is simply mounted in position with the two brackets which are screwed to the studwork. Invisi II Under Counter For wall hung pan applications, Code No The D.403 Invisi II WH Bracket is for concrete floors or stud wall installations. The bracket system is suitable for installation only where non compressible wall materials are used. Invisi II Inwall/Induct/Inceiling Cistern For wall hung pan applications, Code No The D.402 Invisi II WH Bracket is for concrete floors or stud wall installations. The bracket system is suitable for installation only where non compressible wall materials are used. Invisi II Structural Brick Wall For structural brick walls the cistern is fixed inwall and the wall hung pan is fixed using the D.788 Sanifix Bolt Through the Wall Bracket. Invisi II Urinal Single Flush: The Invisi II 3 star, 1.8 litre single stall urinal cistern is with instructions for conversion to suit two stall and three stall, and 0.8 litre applications. A copper sparge adapter is included in place of a flush pipe. Working pressure is minimum 30kPa to maximum 1000 kpa flow pressure. Colours: White, chrome and satin chrome button options available see Invisi II page 3. Dimensions: All dimensions are in millimetres and are subject to normal manufacturing tolerances. Caroma pursues a policy of continuing improvement in design and performance of its products. The right is therefore reserved to vary specifications without notice Water inlet connection To centre line of Note: Cistern height can be increased to 3m with additional flush pipe extension kit (adjustable) 205 max. flush pipe support Studs 400mm 420mm

3 Invisi II Page 3 Invisi II Buttons and Plates (suitable for cistern access) Invisi II Round Dual Flush Plate and Buttons Code No W Code No C Code No S Invisi II Rectangle Dual Flush Plate and Buttons Code No C Code No S Invisi II Round Care Dual Flush Plate and Raised Buttons Code No C Code No S Invisi II Rectangle Single Flush Plate and Button Code No C Code No S Invisi II Blank Access Plate Code No C Code No S Invisi II Custom Buttons (cistern requires alternative access) Invisi II Round Dual Flush Custom Buttons Code No C Code No S Invisi II Rectangle Dual Flush Custom Buttons Code No C Code No S Invisi II Round Single Flush Custom Button Code No C Code No S Invisi II Rectangle Single Flush Custom Button Code No C Code No S Invisi II Access Panel Options for Inwall Applications (Buttons separately) Large Access Panel Dual Flush Top Code No Note: Large access panels are recommended for double brick wall installations. Large Access Panel Single Flush Bottom Code No mm min. mm max. wall lining thickness 5mm min. mm max. wall thickness 5mm min. mm max. wall thickness Invisi II Remote Mounting Box Kit includes 2 x 4m pneumatic hose with flush pipe extension components For use with induct or remote mounted button installations. Code No m pneumatic hose Code No (2 hoses required for remote dual flush installations) Remote Button Plate Installation Standard button plate Installation Custom Button Installation

4 Invisi II Page 4 Under Counter Wall Faced Dual Flush Installation isolating valve, allows for side and back water connections A B C Cube Geo Leda to top of flush pipe support noggin A B min. C (+65 for Odourvac option suitable for front push only) 90mm min. front button installation 100mm min. top button installation Front mount Finished wall Top mount flush pipe support Bench thickness mm max. for top push Pan foot level Leda Wall Faced pan illustrated Note: access to cistern internals can be achieved through either front or top mount button plate option. Under Counter Wall Hung Dual Flush Installation A isolating valve, allows for side and back water connections Metro 408 Cube 408 Walvit min. 850 min. 915 min. for Odourvac option suitable for front push only A 90mm min. front button installation 100mm min. top button installation Front mount Finished wall Top mount Bench thickness mm max. for top push Finished floor Metro Wall Hung pan illustrated Note: access to cistern internals can be achieved through either front or top mount button plate option. The bracket system is suitable for installation only where non compressible wall materials are used.

5 Invisi II Page 5 Inwall Wall Faced Dual Flush Installation 90 min Frame isolating valve min. to underside of noggin and 6 min. max. wall thickness 582 Supplied (adjustable from ) min Frame isolating valve min. to underside of noggin and 6 min. max. wall thickness to top of flush pipe support noggin 965 Supplied (adjustable from ) Pan foot level flush pipe support Leda Wall Faced pan illustrated Uniconnector Note: access to cistern internals can be achieved through button plate. Recommended 90 setout ( range) Inwall Wall Hung Dual Flush Installation Spacer if required (Not ) 947 Stud fixing bolt kit ( Not ) Wall hung bracket suitable for structural slab or stud wall installation Cube Wall Hung pan illustrated Stud wall installation (For non-structural floor) The bracket system is suitable for installation only where non compressible wall materials are used. 408 ref Finished floor 40 For 100mm UPVC DWV connection use Caroma Invisi II wall hung waste connector 170 max. from finished wall with Invisi II WH pan connector Note: access to cistern internals can be achieved through button plate. 213

6 Invisi II Page 6 Induct Wall Faced with Remote Mounting Box Kit isolating valve 135 max. with flush pipe 5 min. max. wall lining thickness Remote mounted plate and Service duct (Cistern to be installed backwards for service duct access) 582 Supplied (adjustable from ) 25 to top of flush pipe support noggin Supplied (adjustable from ) 395 Pan foot level Use flush pipe extension kit for higher installation flush pipe support Leda Wall Faced pan illustrated Uniconnector Recommended 90 setout ( range) Induct Wall Hung with Remote Mounting Box Kit 135 max. with flush pipe isolating valve 5 min. max. wall lining thickness Remote mounted plate and Service duct (Cistern to be installed backwards for service duct access) Structural Wall Installation (Option) D788 Sanifix Bolt through wall bracket Code No ref Finished floor The bracket system is suitable for installation only where non compressible wall materials are used. Wall hung bracket suitable for structural slab or stud wall installation (Use D788 for structural wall installation) Cube Wall Hung pan illustrated For 100mm UPVC DWV connection use Caroma Invisi II wall hung waste connector 170 max. from finished wall with Invisi II WH pan connector The waste pipe must be accurately centralised to achieve a minimum wall cavity dimension of 90mm.

7 Invisi II Page 7 Inceiling Wall Faced with Remote Mounting Box Kit frame Invisi II Flush Pipe Extension 70mm Cavity (components with remote mounting box kit) Kee Seal Cistern Adaptor Breather Tube Cut to length and solvent weld (not ) 40mm 90 PVC DWV elbow (not ) Cut to length and solvent weld (not ) Invisi II Flush Pipe Extension 90mm Cavity (components with remote mounting box kit) Cistern Adaptor Kee Seal Breather Tube Cut to length and solvent weld (not ) Flush pipe Adaptor Flush Pipe (with cistern) isolating valve 90 Invisi II cistern Ceiling void Ceiling access 40mm DWV fabricated flush pipe Where the ceiling space is restricted the Invisi II can be dropped into the wall cavity. 4 metres long (max.) pneumatic tube (Included with remote mounting box kit) Note: Minimum wall cavity 70mm if cistern is inceiling. 90mm if cistern is in wall cavity. 150mm if uniconnector is in wall cavity. 4.5 min. max. wall cladding thickness 3m max. Remote mounted plate and 395 Flush pipe extension kit 25 to top of flush pipe support noggin Recommended push button position Pan foot level 25 flush pipe support 185 Leda Wall Faced pan illustrated Uniconnector Recommended 90 setout ( range) For 100mm UPVC DWV connection use Caroma Uniconnector PVC adaptor Vinidex Code No.785

8 Invisi II Page 8 4.5/3 LITRE DUAL FLUSH - Toilet Suites For 4.5/3 litre the bucket is preset. Connect pneumatic hoses to both the half flush and full flush positions. 4.5L 6/3 LITRE DUAL FLUSH - Toilet Suites For 6/3 litre flush remove outlet valve from cistern and bucket (see below), refit outlet valve in cistern. Connect the pneumatic hoses to both the half flush and full flush positions. Cut the 4 tabs to remove bucket 1.8 LITRE SINGLE FLUSH - Single Stall Urinal For 1.8 litre flush the bucket is preset. Connect the pneumatic hose to the full flush position. 0.8 LITRE - Single Stall Urinal For the 0.8 litre flush adjust the bucket to the 0.8L mark. Adjust water level to appropriate mark on cistern tank. Connect the pneumatic hose to the full flush position. 3.8 LITRE - 2 Stall Urinal For 3.8 litre flush, adjust the bucket to the 3.8L mark, and reset the water level to the corresponding mark on the cistern. Connect the pneumatic hose to either flushing position. 1.8L 5.8L LITRE SINGLE FLUSH - 3 Stall Urinal Conversion For 5.8 litre flush remove outlet valve from cistern and bucket (see below), refit outlet valve in cistern. Connect the pneumatic hose to either flushing position. Cut the 4 tabs to remove bucket

9 Invisi II Page 9 Flush pipe Extension Components (included in Remote Mounting Box Kit) Invisi II Flush Pipe Extension 90mm Cavity (components with remote mounting box kit) Breather Tube Cistern Adaptor Cut to length and solvent weld to adaptors (Not ) Flush pipe Adaptor Breather Tube Outlet Valve Flush Pipe ( with cistern) Kee Seal Invisi II Flush Pipe Extension 70mm Cavity (components with remote mounting box kit) Breather Tube Cistern Adaptor Cut to length and solvent weld (Not ) Cistern Base Kee Seal 40mm 90 PVC DWV elbow (Not ) - cut to length and solvent weld (Not )

10 Invisi II Page 10 Inwall/Induct Urinal Invisi II Installation Inwall Urinal Suite Induct Urinal Suite Frame isolating valve 6 min. max. wall thickness Finished wall 90mm min. cavity. 70mm min. for inceiling installation 5 min. max. wall lining thickness Service duct (Cistern to be installed backwards for service duct access) Blank Access plate 500 min. 335 to access panel Remote single flush push button Invisi II Cistern Ø20 sparge pipe 18 Reducer to Ø40 copper pipe Ø40 Flush pipe 65 Vitreous China Grate * 597 D.170 Concealed Fixing Bracket centre * mm recommended standard height. 400mm recommended disabled height (no pedestal). Finished floor standard 129 disabled

Invisi II. 242 For further information visit or call The more stars the more water efficient WATER RATING

Invisi II. 242 For further information visit or call The more stars the more water efficient WATER RATING A joint government and industry program Licence No. 0001 When tested in accordance with Standard AS/NZS 6400 For more information and to compare products, refer to: Invisi II 4.5/3 litre Inwall/Under Counter/