BILL OF QUANTITY PART-III CIVIL WORKS ITEM NO. DESCRIPTION UNIT QTY RATE AMOUNT

Size: px

Start display at page:

Download "BILL OF QUANTITY PART-III CIVIL WORKS ITEM NO. DESCRIPTION UNIT QTY RATE AMOUNT"

Harold Hall
5 years ago
Views:

1 Page 1 BILL OF QUANTITY PART-III CIVIL WORKS ITEM NO. DESCRIPTION UNIT QTY RATE AMOUNT 1 Providing and fixing door Closer/Bottle type Each 10 2 Providing and fixing door Stopper Each 10 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : marked, with 3 cover and suitable locking Liter 1000 arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make,in all colors, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in SQM 30 skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

2 Page 2 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1 st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, SQM 30 Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours SQM 30 and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 500x500 mm Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming KG 10 coat with approved steel primer all complete. Fixed to steel windows by welding Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. Flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : EACH , with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

3 Page 3 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40 mm flush bend, overflow arrangement EACH 2 with specials of standard make and mosquito proof coupling of approved municipal design complete, Including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded EACH frame of approved make and 2 shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm 18.1 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work- Exposed on wall 15 mm dia nominal bore 20 mm dia nominal bore 25 mm dia nominal bore 32 mm dia nominal bore METRE METRE METRE

4 Page 4 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard 09/21/03 wood and well matched commercial 3 ply veneering SQM 20 with vertical grains or cross bands and face veneers on both faces of shutters : 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws Providing and fixing ISI marked oxidised M.S. sliding EACH door bolts with nuts and 10 screws etc. complete :300x16 mm Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with EACH 10 necessary screws etc. complete :125 mm Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Teesections, 10/13/01 joints mitred and welded, including fixing of KG 10 necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) Providing and fixing wash basin with C.I. brackets, 15 mm C.P. Brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and EACH 2 brackets, cutting and making good the walls wherever require :White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

5 Page 5 Providing and fixing P.V.C. low level flushing cistern with the manually controlled device (handle lever) EACH conforming to IS : 7231, with 3 all fittings and fixtures complete.10 itre capacity - White Providing and fixing soil, waste and vent pipes :100 mm METRE dia, Sand cast iron S&S pipe 20 as per IS: 1729 Providing and fixing white vitreous china squatting plate EACH urinal with integral rim 2 longitudinal flush pipe 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including Cutting chases and making good the walls etc. 15 mm nominal outer dia Pipes METRE mm nominal outer dia Pipes METRE Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement,trenching refilling & testing of joints complete as per direction of Engineer in Charge. External work 15 mm nominal outer dia Pipes METRE mm nominal outer dia Pipes METRE 40

6 Page Providing and fixing brass bib cock of approved quality : 15 mm nominal bore EACH mm nominal bore EACH 10 Providing and fixing brass stop cock of approved quality 15 mm nominal bore EACH mm nominal bore EACH 10 Cleaning of overhead and 1 (A) Underground tanks are required Each To be cleaned once in every 3 2 months AT R.o Disposal of building rubbish / malba / similar unserviceable, Dismantled or waste materials by mechanical means, including Loading, transporting, 2.(15.60) unloading to approved Cum 10 municipal dumping Ground or as approved by Engineer-incharge, beyond 50 m initial lead, for all leads including all lifts involved. White washing with lime to give an even shade :Old work SQM 200 (two or more coats) Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary SQM 200 repairs to scratches etc. complete Distempering with oil bound Washable distemper of approved brand and manufacture to give SQM 200 an even shade : Old work (one or more coats) Removing dry or oil bound Distemper, water proofing cement paint and the like by scrapping, sand papering and SQM 200 preparing the surface smooth including necessary repairs to scratches etc. complete.

7 Page Painting with synthetic enamel SQM 50 Paint of approved brand and Manufacture of required colour to give an even shade : One or more coats on old work Providing and applying plaster of Paris putty of 2 mm thickness over plastered SQM 200 surface to prepare the surface even and smooth complete. Applying priming coat :With ready mixed pink or Grey primer of approved brand and SQM 100 manufacture on wood work (hard and soft wood) Repairs to plaster of 14.1 thickness 12 mm to 20 mm in patches SQM 100 with cement mortar 1:4. Fixing chowkhat in existing opening in brick / RCC wall with dash fasteners/ Chemical fasteners of appropriate size 14.3 (3 nos on each vertical member EACH of door chowkhat and 2 nos on 5 each vertical member of window chowkhats), including Cost of dash fasteners/ chemical fastener Float glass panes of thickness 5.5 mm SQM 150 Distempering with dry distemper of approved brand and manufacture (one or more SQM 200 coats) and of required shade on old work to give an Even shade. Polishing on wood work with ready made wax polish of SQM 100 approved Brand and manufacture : Old work

8 Page 8 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of SQM 100 rubbish to the dumping ground within 50 metres lead mm cement plaster of mix : SQM 100 1:6 (1 cement: 6 coarse sand) mm cement plaster on rough side of single or half brick SQM 100 wall of mix : 1:4 (1 cement: 4 coarse sand) THE RATES ARE BASED ON DSR-2014 AND LOWEST MARKET RATE WHICH ARE VERIFIED PERSONALLY QUANTITY PROVIDED ARE SUFFICIENT FOR THE YEAR FURTHER ESCALATION IN QUANTITIES OF MATERIAL WOULD TAKEN INTO CONSIDERATION BY AN ENGINEER-IN-CHARGE.ANY ITEM WHICH ARE NOT COVERED INTO THE ESTIMATE WILL BE PAYABLE ON THE BASIS OF DSR RATES & NON DSR ITEM WILL BE PAYABLE ON THE BASIS OF LOWEST MARKET RATE.

CIVIL/INTERIOR RENOVATION WORKS OF BASEMENT-2 AT ADMINISTRATIVE OFFICE, SHIMLA

CIVIL/INTERIOR RENOVATION WORKS OF BASEMENT-2 AT ADMINISTRATIVE OFFICE, SHIMLA FINANCIAL BID/PRICE BID/SHEDULE OF QUANTITIES Sl.No. Description of Item Quantity Rate (Rs) Unit Amount (Rs) 1 Providing and