Invisi II. 242 For further information visit or call The more stars the more water efficient WATER RATING

Transcription

1 A joint government and industry program Licence No When tested in accordance with Standard AS/NZS 6400 For more information and to compare products, refer to: Invisi II 4.5/3 litre Inwall/Under Counter/ Induct/Inceiling Installation. 1.8 litre Single Flush Urinal Inwall/Under Counter/ Induct/Inceiling Installations. A 4.5/3 litre dual flush plastic cistern suitable for inwall, under counter, induct and inceiling applications. The cistern features a number of contemporary button design options with concealed fixing that are pneumatically operated for ease of operation and installation. The push buttons can be activated remotely up to 4 metres from the cistern, ideal for care and custom applications. The cistern incorporates Caroma Smartflush water saving technology. For installation flexibility the cistern, bracket and specially designed waste pipe have been developed to be installed in a standard 90mm metal or timber stud wall applications.the cistern is adjustable to 6/3 litre dual flush. Extended pneumatic hoses are additional and supplied separately Code No Alternatively the extended hose is also supplied with the Remote Mounting Box Kit Code No Invisi II Installations: Inwall The cistern can be fitted within a minimum cavity of 90mm with service access within the room via the standard or large button panel. A range of access panel kits are available to suit dual flush, single flush and remote push button positions. Under Counter The cistern can be fitted under counter with a minimum cavity depth of 90mm for front mount button installations and 100mm from the finished wall face to the counter's internal front face, for top mount button installations, as illustrated in Invisi II following pages (not suitable for urinals). Induct The cistern is suitable for behind the wall installations in a single service duct, as illustrated in following pages. Inceiling The cistern is suitable for mounting in the ceiling duct where access is provided for adjustment and servicing. This installation requires the fabrication of a using 40mm DWV and Flush Pipe Extension components contained in the Remote Mounting Box Kit Code No , as illustrated in following pages. Due to the high head height, only nominated Caroma boxed rim pans should be used with this installation. Invisi II Buttons Buttons and access plate are not included with the cistern, see following pages for available options. The more stars the more water efficient WATER RATING Water Consumption 1.8 litres per flush per stall For further information visit or call

2 Invisi II Inwall/Under Counter/Induct/Inceiling Cistern For wall faced pan applications, Code No For wall faced pan installations the cistern is simply mounted in position with the two brackets supplied which are screwed to the studwork. Invisi II Under Counter For wall hung pan applications, Code No The D.403 Invisi II WH Bracket is supplied for concrete floors or stud wall installations. Note: The bracket system is suitable for installation only where non compressible wall materials are used. Invisi II Inwall/Induct/Inceiling Cistern For wall hung pan applications, Code No The D.402 Invisi II WH Bracket is supplied for concrete floors or stud wall installations. Note: The bracket system is suitable for installation only where non compressible wall materials are used. Invisi II Structural Brick Wall For structural brick walls the cistern is fixed inwall and the wall hung pan is fixed using the D.788 Sanifix Bolt Through the Wall Bracket. Invisi II Urinal Single Flush: The Invisi II 3 star, 1.8 litre single stall urinal cistern is supplied with instructions for conversion to suit two stall and three stall, and 0.8 litre applications. A copper sparge adapter is included in place of a. Important: Working pressure is minimum 30kPa to maximum 1000 kpa flow pressure. Installation: Refer to Important Information for Plumbers section. Colours: White, chrome and satin chrome button options available, see following page Water inlet connection To centre line of buttons Note: Cistern height can be increased to 3m with additional extension kit (adjustable) 205 max. Studs 400mm 420mm flush pipe support For further information visit or call

3 Invisi II Buttons and Plates (suitable for cistern access) Invisi II Round Plate and Buttons Code No W Code No C Code No S Invisi II Rectangle Plate and Buttons Code No C Code No S Invisi II Round Care Plate and Raised Buttons Code No C Code No S Invisi II Rectangle Single Flush Plate and Button Code No C Code No S Invisi II Blank Access Plate Code No C Code No S Invisi II Custom Buttons (cistern requires alternative access) Ø67 78 Invisi II Round Custom Buttons Code No C Code No S Invisi II Rectangle Custom Buttons Code No C Code No S 78 Invisi II Round Single Flush Custom Button Code No C Code No S Invisi II Access Panel Options for Inwall Applications (Buttons supplied separately) 470 Invisi II Rectangle Single Flush Custom Button Code No C Code No S Ø67 Ø67 34 Invisi II Round Care Raised Buttons Code No C Code No S Large Access Panel Top Code No Large Access Panel Single Flush Bottom Code No Large Access Panel Blank Code No Note: Large access panels are recommended for double brick wall installations. Invisi II Remote Mounting Box Kit includes 2 x 4m pneumatic hose with extension componentsfor use with induct or remote mounted button installations. Code No m pneumatic hose. Code No (2 hoses required for remote dual flush installations) 6mm min. mm max. wall lining thickness 5mm min. mm max. wall thickness 5mm min. mm max. wall thickness Remote Button Plate Installation Standard button plate Installation Custom Button Installation 244 For further information visit or call

4 Under Counter Wall Faced Invisi II Smartflush Suite Installation 410 min. isolating valve supplied allows for side and back water connections 25 to top of support noggin A B C (+65 for Odourvac option suitable for front push only) Pan foot level Accurate positioning of the waste pipe relative to studwork is essential. Leda wall faced pan illustrated. A B C Cube Geo Leda Finished wall 90mm min. front button installation 100mm min. top button installation Top mount buttons Bench thickness mm max. for top push buttons Front mount buttons support Note: Access to cistern internals can be achieved through either front or top mount button plate option. Under Counter Wall Hung Invisi II Smartflush Suite Installation 410 min. isolating valve supplied allows for side and back water connections min. 915 min. for Odourvac option suitable for front push only Finished floor Accurate positioning of the waste pipe relative to studwork is essential. Metro wall hung pan illustrated. Cube 408 Walvit 405 Metro mm min. front button installation 100mm min. top button installation A Top mount buttons Front mount buttons Finished wall Bench thickness mm max. for top push buttons Note: The bracket system is suitable for installation only where non compressible wall materials are used. A Note: Access to cistern internals can be achieved through either front or top mount button plate option. For further information visit or call

5 Inwall Wall Faced Invisi II Smartflush Suite Installation Frame isolating valve supplied min. to underside of noggin and buttons 90 min. 6 min. max. wall thickness 25 to top of flush pipe support noggin 582 Supplied (adjustable from ) Supplied (adjustable from ) 395 Pan foot level support 185 Accurate positioning of the waste pipe relative to studwork is essential. Leda wall faced pan illustrated. Recommended 90 setout ( range) Note: Access to cistern internals can be achieved through button plate. Uniconnector Inwall Wall Hung Invisi II Smartflush Suite Installation Frame isolating valve supplied min. to underside of noggin and buttons 90 min. 6 min. max. wall thickness ref Finished floor Accurate positioning of the waste pipe relative to studwork is essential. Cube wall hung pan illustrated. Wall hung bracket suitable for structural slab or stud wall installation Spacer if required (not supplied) For 100mm UPVC DWV connection use Caroma Invisi II wall hung waste connector 170 max. from finished wall with Invisi II WH pan connector Note: The waste pipe must be accurately centralised in the cavity to achieve a minimum dimension of 90mm. Stud fixing bolt kit (not supplied) Note: Access to cistern internals can be achieved through button plate. Stud wall installation (for non-structural floor) Note: The bracket system is suitable for installation only where non compressible wall materials are used. 246 For further information visit or call

6 Induct Wall Faced Invisi II Smartflush Suite Installation isolating valve supplied 135 max. with flush pipe 5 min. max. wall lining thickness Remote mounted plate and buttons Service duct (Cistern to be installed backwards for service duct access) 25 to top of flush pipe support noggin 582 Supplied (adjustable from ) Supplied (adjustable from ) 395 Pan foot level Use extension kit for higher installation support Accurate positioning of the waste pipe relative to studwork is essential. Leda Wall Faced pan illustration. Uniconnector Recommended 90 setout ( range) Induct Wall Hung Invisi II Smartflush Suite Installation isolating valve supplied 5 min. max. wall lining thickness Remote mounted plate and buttons 135 max. with (Supplied) Service duct (Cistern to be installed backwards for service duct access) Wall hung bracket suitable for structural slab or stud wall installation (Use D788 for structural wall installation) 408 ref 0 Finished floor Accurate positioning of the waste pipe relative to studwork is essential. Cube Wall Hung pan illustrated. For 100mm UPVC DWV connection use Caroma Invisi II wall hung waste connector 170 max. from finished wall with Invisi II WH pan connector Structural Wall Installation (Option) Note: The waste pipe must be accurately centralised in the cavity to achieve a minimum dimension of 90mm. D788 Sanifix Bolt through wall bracket Code No Note: The bracket system is suitable for installation only where non compressible wall materials are used. For further information visit or call

7 Inceiling Wall Faced Invisi II Smartflush Suite Installation with Remote Mounting Box Kit Invisi II Flush Pipe Extension Kit 70mm Cavity (components supplied with Remote Mounting Box kit) Invisi II Flush Pipe Extension Kit 90mm Cavity (components supplied with Remote Mounting Box kit) Cistern Adaptor Kee Seal Breather Tube 40mm PVC DWV Pipe Cut to length and solvent weld (not supplied) 40mm 90 PVC DWV elbow (not supplied) 40mm PVC DWV Pipe Cut to length and solvent weld (not supplied) Cistern Adaptor Kee Seal Breather Tube 40mm PVC DWV Pipe Cut to length and solvent weld (not supplied) Flush pipe Adaptor Flush Pipe (with cistern) frame stopcock supplied 90 Invisi II cistern Ceiling void Ceiling access Where the ceiling space is restricted the Invisi II can be dropped into the wall cavity. 4 metres long (max.) pneumatic tube (Included with Remote Mounting Box kit) 40mm DWV fabricated Note: Minimum wall cavity 70mm if cistern is inceiling. 90mm if cistern is inwall cavity. 150mm if uniconnector is inwall cavity. 4.5 min. max. wall cladding thickness Remote mounted plate and buttons 3m max. Flush pipe extension kit to top of support noggin Recommended push button position Pan foot level support Leda Wall Faced pan illustrated. Uniconnector Recommended 90 setout ( range) For 100mm UPVC DWV connection use Caroma Uniconnector PVC adaptor Vinidex Code No For further information visit or call

8 4.5/3 Litre Toilet Suites For 4.5/3 litre the bucket is preset. Connect the pneumatic hoses to both the half flush and full flush positions. 4.5L 6/3 Litre Toilet Suites For 6/3 litre flush remove outlet valve from cistern and bucket (see below), refit outlet valve in cistern. Connect the pneumatic hoses to both the half flush and full flush positions. Cut the 4 tabs to remove bucket 1.8 Litre Single Flush Single Stall Urinal For 1.8 litre flush the bucket is preset. Connect the pneumatic hose to the full flush position. 0.8 Litre Single Flush Single Stall Urinal For the 0.8 litre flush adjust the bucket to the 0.8 litre mark. Adjust water level to appropriate mark on cistern tank. Connect the pneumatic hose to the full flush position. 3.8 Litre Single Flush TwoStall Urinal For 3.8 litre flush adjust the bucket to the 3.8 litre mark and reset the water level to the corresponding mark on the cistern tank. Connect the pneumatic hose to either flushing position. 1.8L 5.8 Litre Single Flush 3 Stall Urinal Conversion For 5.8 litre flush remove outlet valve from cistern and bucket (see below). Connect the pneumatic hose to either flushing position. Cut the 4 tabs to remove bucket For further information visit or call

9 Flush Pipe Extension Components (included in Remote Mounting Box Kit) Invisi II Flush Pipe Extension 90mm Cavity (components supplied with Remote Mounting Box Kit) Breather Tube Cistern Adaptor 40mm PVC DWV Pipe Cut to length and solvent weld to adaptors (not supplied) Flush pipe Adaptor (Supplied) Flush Pipe (with cistern) Kee Seal Invisi II Flush Pipe Extension 70mm Cavity (components supplied with Remote Mounting Box Kit) Kee Seal Breather Tube Cistern Adaptor 40mm PVC DWV Pipe Cut to length and solvent weld (not supplied) 40mm 90 PVC DWV elbow (Not supplied) 40mm PVC DWV Pipe Cut to length and solvent weld (not supplied) Breather Tube Outlet Valve Cistern Base 250 For further information visit or call

10 Inwall/Induct Urinal Invisi Invisi II II Installation Inwall Urinal Suite Frame isolating valve supplied 90mm min. cavity, 70mm min. for inceiling installation 6 min. max. wall thickness Finished wall Blank access panel 500 min. 335 to access panel Invisi II Cistern Reducer to Ø40 copper pipe Ø40 Flush pipe 18 Ø20 sparge pipe Single flush plate and button Vitreous China Grate 438 * 597 D.170 Concealed Fixing Bracket centre Finished floor standard 129 disabled * 650mm recommended standard height. 400mm recommended disabled height (no pedestal). Leda urinal illustrated. Induct Urinal Suite 5 min. max. wall lining thickness Service duct (Cistern to be installed backwards for service duct access) For further information visit or call