KIN-TEK. The Calibration Specialists

Transcription

1 KIN-TEK The Calibration Specialit

2 491M Ga Standard Generator Modular Sytem Thi modular ytem i for multipoint, multicomponent calibration of mot type of ga analyzer uch a GC, GC-MS, FTIR & Ion Mobility Spectrometer. The 491M ha a concentration range of ub-ppb to 50%, depending on the compound and module elected. Thi broad concentration range, plu the preurized ample delivery ytem, humidification module, econdary dilution module, analyzer interface module and extra permeation tube oven module allow the uer to cutom configure the intrument to the application. Thi intrument ue all type of permeation tube. The humidification module humidifie the tandard up to 80% relative humidity. ppb & pptr Standard Humidified Standard VOC in Air Reactive Compound Complex Mixture Simultaneou Standard 491MB Ga Standard Generator Thi ga tandard generator i the ingle oven bae unit of the 491M Modular Sytem, houed in a ingle unit cabinet. It i ued for application requiring le complex mixture and not requiring imultaneou tandard. It ha a preurized ample delivery ytem and ue Trace Source Dipoable Permeation Tube or a liquid filled Refillable Permeation Tube to generate ppb to 1,000 ppm, depending on the compound. Toxic Air Pollutant VOC Standard Complex Mixture Reactive Compound Sulfur, Solvent, Amine TO-14 Calibration Bench Thi bench i for calibration of ga analyi ytem requiring complex ga mixture uch a VOC analyi ytem. It ue Trace Source Permeation Tube to generate a calibration mixture of up to 240 compound. The mixture i fed directly to the analyi ytem or captured in paivated, low preure caniter. The concentration of each compound i traceable to NIST. The TO-14 Bench contain up to 30 individually controlled permeation tube oven. A tandard humidification module i alo available. VOC Toxic Air Pollutant Fill Paivated, Low Preure Caniter Generate Humidified Standard

3 KIN-TEK Ga Standard Generator ue Trace Source Permeation Tube to generate accurate, on-line calibration tandard. Gain the convenience of on-line validation, plu the aurance of N.I.S.T. traceability. There are permeation tube for over 350 chemical compound, including Toxic Air Pollutant, VOC, Acid Gae, Amine, Sulfur and Hydride. BENEFITS Eliminate the rik of non-compliance Replace hazardou ga cylinder NIST Traceability Trace Source Refillable Permeation Tube Thee refillable tube are ued in KIN-TEK Ga Standard Generator to form ub ppb to 1,000 ppm ga tandard, depending on the compound. Refillable Permeation Tube are mall (6 x 1.75 ) tainle teel cylinder with an internal permeation membrane, deigned to be refilled without diturbing the membrane. Refillable Permeation Tube can be filled with the liquid phae or ga phae of the component compound, depending on the phyical propertie of the compound. The flow rate of the compound from a Refillable Permeation Tube can be varied by changing the temperature of the tube, and in a ga filled tube by alo adjuting the preure of the component ga. Each tube i laboratory certified at the temperature pecified by the cutomer. Trace Source Dipoable Permeation Tube Thee dipoable tube are ued in KIN-TEK Ga Standard Generator to form ub ppb to 20 ppm ga tandard, depending on the compound. Dipoable Permeation Tube are hort length (2.5 to 6 inche) of Teflon tubing with the liquid phae of the compound ealed inide. When held at a contant temperature, the vapor of the liquid pae through the wall of the permeation tube by molecular permeation, dipening an extremely mall, table flow of pure component compound which i meaured in nanogram per minute. The flow rate of the compound can be varied by changing the temperature of the tube. The flow rate of each tube i laboratory certified by NIST traceable method. All certified tube are erial numbered and their flow rate data kept on file.

4 Span Pac H 2 O Thi unit i for calibration of enitive moiture analyzer. It generate 100 ppb to 10 ppm moiture tandard from Trace Source Permeation Tube. The Span Pac H 2 O ha a purgeable cabinet, electropolihed, paivated, tainle teel tubing, and VCR input/output fitting to prevent atmopheric contamination and enure the integrity of the ytem. It can be operated by remote tation and i available in a 2 oven unit in a proce or laboratory cabinet. Calibrate Senitive (100 ppb) Moiture Monitor Verify Moiture Senor and Probe Calibrate On-line Product Quality Control Monitor Span Pac I Ga Standard Generator Thi generator i ued for multipoint, multicomponent calibration of proce ga analyzer and continuou emiion monitor. The Span Pac I ue Trace Source Permeation Tube to form ppb to 1,000 ppm tandard, depending on the compound. It i pecifically deigned for field mounting and can be operated from a remote tation. Multiple permeation tube oven can be houed in a ingle NEMA 4 cabinet. Alo available with Z purge. Proce Quality Control On-line Validation of CEM Sulfur, Solvent, Acid Standard Standard in Reactive Matrixe Span Chek Thi field portable calibrator i ued for checking the pan of toxic ga monitor and paive enor. It ue Trace Source Dipoable Permeation Tube to generate 10 ppb to 100 ppm ga tandard, depending on the compound. It contain an internal dilution air pump, a 12V DC rechargeable battery, and ha a houlder trap for eay handling. Toxic Gae uch a NO 2, SO 2, HF, Cl 2, HCN, NH 3, & H 2 S Individual data heet are available on each product. Contact the KIN-TEK office or the repreentative in your area.

5 Typical Flow Diagram PRESSURE REGULATOR DILUENT IN V1A C F.C. 1 OVEN FLOW ADJUST C V1B SPAN VALVE (To other module) (Unmetered) B (Metered) A F.I. MASS FLOWMETER ZERO VALVE PERMEATION OVEN F.C. 2 DILUTION ADJUST ZERO / SPAN OUT VENT The Perm Tube Method Traceable Ga Standard Component F* (Dilution Flow) f* C= 10 6 F* f* (Permeate Flow) *Value Traceable to NIST f=component emiion at temp T F=Dilution ga flow C=Concentration

6 KIN-TEK ha deigned and built calibration ga ytem for more than a quarter of a century. Becaue we believe that the quality of an analyi depend on the quality of the calibration tandard, KIN-TEK i committed to providing calibration tandard that meet the high quality expectation of our cutomer. Our commitment to your atifaction extend through delivery, to on-ite intallation, training, and application work. KIN-TEK The Calibration Specialit 504 Laurel La Marque, TX USA Ph: (409) (800) Fax: (409) ale@kin-tek.com