2018 Plumbing Apprenticeship Training Information. CPC32413 Certificate III in Plumbing - RTO 1892

Transcription

1 2018 Plumbing Apprenticeship Training Information CPC32413 Certificate III in Plumbing - RTO 1892 The CPC32413 Certificate III in Plumbing units are divided into 6 stages of training over a 4 year apprenticeship. Students who have completed a Plumbing Pre Apprenticeship may be eligible for credits for some stage 1 & 2 units. Please note Pre Apprentice students may need to complete some GAP training prior to commencing Stage 3. To commence your apprenticeship training with MPA Skills you must: 1. Be employed as an Apprentice Plumber 2. Sign a contract with the assistance of an Apprentice Support Network (ASN) (for more information you can contact the Apprenticeship Office ) 3. Choose MPA Skills as your training provider with your ASN Once your ASN has notified the Apprenticeship Office of your training provider preference, we will be notified. MPA Skills will contact the employer & student to arrange a Training Plan. It is important the Apprentice, Employer and Training Provider sign the Training Plan as soon as possible (penalties can apply for late Training Plans). X:\Skill Centre\Website\Apprentieship\CPC32413 Training Information 2018.docx Page 1 of 6 21-May-18 3:32 PM

2 CPC32413 Certificate III in Plumbing Training Information Attendance Training commences at 8.00am and finishes at 3.30pm, Apprentices must attend all classes. Please do not be late! Missed classes may result in non-completion of the qualification. A fee will be charged for any additional classes required. If a student is unable to attend due to sickness they must phone reception on to notify. Unique Student Identifier (USI) Every student must have a USI number prior to commencing training. What is a USI? The Unique Student Identifier or USI is a reference number made up of 10 numbers and letters that: Creates a secure online record of your recognised training and qualifications gained in Australia, even from different training organisations Will give you access to your training records and transcripts (available in late 2016) Can be accessed online, anytime and anywhere Is free and easy to create and Stays with you for life Visit the USI website ( to obtain a USI. If you have not given us your USI already you can text it with your full name to Travel If your apprentice requires flights to be booked to attend training, please apprentice@mpaskills.com.au the attached Travel Form as soon as possible with the dates you require. If you would like reimbursement for petrol or accommodation please log onto Accommodation-Allowance-claim-form-for-apprenticestrainees.aspx Invoices Invoices will be issued to students around 2 weeks prior to each stage commencement date. Please do not make a payment until you have been issued your invoice as you will need your invoice number as a reference when making a payment. Invoices MUST be paid prior to attending training. If you have not received your invoice a week prior to training please apprentice@mpaskills.com.au Our preferred payment method is online BSB: Account Number: Account Name: Reference: Concession: MPA Skills your invoice number (you must have an invoice number before you can a payment) Please supply a copy of your Health Care Card, other Concession card your Birth Certificate when applying for concession MPA Employed Apprentices Students employed MPA will not be required to pay course fees. All text books except the AS3500 & AS5601 will also be covered by MPA. Students will be issued a pay deduction form to purchase the AS3500 & AS5601 if they are unable to pay in full. X:\Skill Centre\Website\Apprentieship\CPC32413 Training Information 2018.docx Page 2 of 6 21-May-18 3:32 PM

3 Text Books Text books are to be purchased separately, the attached Text Book Order Form outlines which books are required for each stage and the prices. You can purchase your books by bringing the completed order form on your first day of training to our bookshop (we prefer payment by card but if paying by cash ensure you have the exact amount as we are not able to provide change). Students must bring the text books outlined in the attached Book List to every class.. If your employer is paying for your books please ask them to complete the credit card section on the Text Book Order Form and bring to day one of your training. It is mandatory that apprentices bring the AS3500 (current version 2015) Gas Standards Regulations to all classes. Students are welcome to borrow books from employers but they must be the current versions. Protective Clothing It is mandatory for all apprentices to wear trade appropriate long sleeved shirt and long trousers that comply with a fire retardant classification (class EN clause 7.3) and steel cap boots to AS/NZS 2210 at all times in the workshop areas. Safety Clothing and footwear compliant to the relevant standards can be purchased from any reputable safety supplier such as Safety World, RSEA etc. Gas Permit Students MUST have a Restricted G Class Gas Permit issued by Energy Safety prior to commencing any stage. Students who do not have a restricted Gas Permit Course must enrol into the course for an additional cost of 300 which is invoiced separately. Once the student has successfully completed the Restricted Gas Permit course they will receive a letter from MPA Skills stating they are competent in Gas Safety, Gas Legislation, Gas Combustion & Fluing. This letter will enable the student to apply to Energy Safety for their Restricted Gas Permit. For more information log onto the Energy Safety Website: MY Profiling Log Books MPA Skills are now going paperless with the Gas Workplace Log Book. To monitor your progress the online Gas Workplace Log Book will state the work tasks to be completed with verification by recording the Notice of Completion Numbers. Energy Safety requires trainees to record a number hours of gas related work tasks under supervision, the exact number of hours is dependent on when the apprenticeship contract was signed or training commenced. Please see the table below. Apprenticeship Contract Signed Certificate III in Gas Fitting commenced Minimum Hours On or after 1 July 2018 On or after 1 July hours Between 1 July 2017 and 30 June 2018 Between 1 July 2017 and 30 June hours Between 1 July 2016 and 30 June 2017 Between 1 Jan 2017and 30 June hours Prior to 30 June 2016 Prior to 01 Jan hours (approx) NOTE: There is an annual fee of 50 for My Profiling which will be invoiced to students prior to day one. Invoices must be paid prior to commencing. X:\Skill Centre\Website\Apprentieship\CPC32413 Training Information 2018.docx Page 3 of 6 21-May-18 3:32 PM

4 Student Handbook Students are required to read the MPA Skills Student Handbook prior to attending any training at MPA Skills. The handbook can be found on our website On Completion of your Apprenticeship Once an apprentice has completed all the Off the Job training, MPA Skills will the employer a Completion Form which is to be signed by the apprentice & employer and ed back to us. MPA Skills will then issue the Certificate III qualification. On the completion date we will post the Certificate to the apprentice and notify the Apprenticeship Office who will issue the apprentice a Trade Certificate. The apprentice will take both the Certificate III & the Trade certificate to the Plumbing Licensing Board to apply for their Tradespersons Licence. You can log onto Apprentices can also take their results to Energy Safety to apply for their Gas Permit (only once a Gas Log Book has been completed) Early Completion Request If you have completed all the required units for CPC32413 Certificate III in Plumbing and your employer deems you competent On the Job, you can apply for an Early Completion. To do this, please apprentice@mpaskills.com.au and we will send your employer the Early Completion form to complete. Please note that the Early Completion Date will need to be no early than 2 weeks from the request to allow us enough time to process the completion. X:\Skill Centre\Website\Apprentieship\CPC32413 Training Information 2018.docx Page 4 of 6 21-May-18 3:32 PM

5 Plumbing Tool & Stationery Requirements 2018 Workshop Housekeeping - Students who do not conform to these requirements will not be allowed to enter the workshop Food and drinks are not allowed in the classroom or workshops Your working area must be left tidy and safe at the end of each day Any tools and equipment that you use must be cleaned and returned The below is required for EVERY class Protective Clothing For safety reasons, steel capped boots, safety glasses & gloves shall be worn in the workshops and long hair must be contained and/or tied back at all times. Board shorts and singlets will not be permitted Due to the requirement to undertake hot works whilst working in the workshops, you will be required to wear trade appropriate fire retardant long sleeve shirt/pants which complies with class EN clause 7.3 T-shirts displaying offensive logos or language are unacceptable Stationery Set of pencils & biros Essential (4 colour pen Red, Blue, Black & Green) Scale rule (1:1, 1:5, 1:10, 1:20, 1:50, 1:100, 1:200, 1:500) Fine point permanent marker & High Lighter Protractor Eraser Tools Squares 45 / Combination square 8m Tape Multigrips/vicegrips/pliers M2 wiss snips (Red, Green & Yellow) Plastic pipe cutters Pop rivett gun Files (round, Flat or rat tail) Copper working tools Spring Benders 15 & 20mm Tube cutters/ pipe slices Tube benders (15mm, 20mm Optional) Claw Hammer Circle Stencil Template Calculator (basic) Correction pen A4 ruled pad or notebook Compass Hand saw Hack saw (spare blades 32 and or 24 teeth) Carpenters pencil or permanent marker Adjustable crescent (200, 250mm) Spirit level (300mm, 600mm) Screwdrivers Rapid flaring tool PVC Cutters Adjustable Crescent X:\Skill Centre\Website\Apprentieship\CPC32413 Training Information 2018.docx Page 5 of 6 21-May-18 3:32 PM

6 2018 Plumbing Apprenticeship Booklist The books required for each stage is outlined below. Please note that students must bring the books they have purchased from previous stages to future classes. Invoice # Book# Pre Apprentice Tick Catapult resource By: 39 Cengage 2nd Edition Oz Skills - Carry Out WHS Oz Skills - Scaffold Oz Skills - Heights Receipt # 54 Oz Skills - Roofs Oz Skills - Oxy Book # Restricted Gas Permit 17 Gas Regs Tick Stage 1 Catapult resource Cengage 2nd Edition Oz Skills - Carry Out WHS Oz Skills - Concreting Stage 2 38 Cengage - Water Cengage - Sanitary/Drain Oz Skills - Roofs Oz Skills - Oxy Oz Skills - Heights Oz Skills - Drain GAP For students who completed a Pre App 38 Cengage - Water Cengage - Sanitary/Drainage Oz Skills - Concreting Oz Skills - Drain Stage 3 56 Oz Skills - Weld Poly Cengage - Roof Plumbing AS Date: Student Name: Mobile: Address MPA Student? Yes or No Student Signature: Pay Deduction Required for AS3500 or AS5601 Yes or No Stage 4 28 Cengage Gas Health Regs Plumbing Standards Oz Skills - Domestic Treat Oz Skills - Discharge Oz Skills - Disposal Stage 5 14 AS Oz Skills - Fire Oz Skills - Pre-Treatment Total of Purchase Name on Card: Credit Card #: / / / Expiry Date: / 20 CSV # 12/07/2018

7 Authority for Employer to purchase books for Apprentice Training If your employer chooses to pay for your Apprenticeship Text books please have the authorised person complete the below: Name: (COMPANY) Billing Address MPGA Member No: THIS SECTION MUST CONTAIN COMPANY S DETAILS Contact Person Suburb Mobile THIS SECTION MUST CONTAIN STUDENT DETAILS I, am duly authorised officer of and hereby (authorised person) (company name) authorize MPA Skills to take payment for course fees from the (student name) credit card details below. CREDIT CARD DETAILS MUST BECOMPLETED Card Number: Card Type: Visa Mastercard Expiry Date: / Amount: Name on Card: Signature Date X:\Skill Centre\Website\Apprentieship\CPC32413 Training Information 2018.docx Page 7 of 6 21-May-18 3:32 PM

8 Authority to Invoice Employer for Student Fees and Charges Students are legally liable for all fees and charges associated with their enrolment at MPA Skills Training Centre unless the employer elects to pay. As the employer, if your company elects to pay all or components of the fees and charges, MPA Skills must receive written authorisation. Note: To avoid students being invoiced it is essential that you complete and return this form via (If applicable, a Purchase Order must be supplied at the same time). Compulsory Fees and Charges for Government Funded Training includes Course and Resource Fees and is payable for each Unit of competency/module the student is enrolled in. Please complete the following if your company is electing to pay student fees and charges then return to MPA Skills as soon as possible. I hereby authorise MPA Skills to invoice: Company Name: Postal Address: Phone: Mobile: Purchase Order Number (if applicable): For the following student s Stage 1 to 6 Apprenticeship Fees whilst employed with the above company: SURNAME: (Please Print Clearly) FIRST NAME: Should your company wish to cancel or amend this authority at any time, MPA Skills must be advised in writing and ed to apprentice@mpaskills.com.au. Any fees covered by this authority that are incurred prior to the authority being withdrawn will be invoiced to your company and only subsequent fees will be the responsibility of the student. Authorised Name (printed): Signature: Date: MPA Skills Telephone: (08) PO Box East Victoria Park, WA apprentice@mpaskills.com.au X:\Skill Centre\Website\Apprentieship\CPC32413 Training Information 2018.docx Page 8 of 6 21-May-18 3:32 PM

9 MPA Skills Online Gas Logbook Plumbing students will have gas work monitored throughout the apprenticeship by their supervisor. To monitor your progress the online Gas Workplace Log Book will state the work tasks to be completed with verification by recording the Notice of Completion Numbers. Energy Safety requires trainees to record the number of hours gas related work tasks are taken under supervision, the exact number of hours is dependent on when the apprenticeship contract was signed or training commenced. Please see the table below. Apprenticeship Contract Signed Certificate III in Gas Fitting commenced Minimum Hours On or after 1 July 2018 On or after 1 July hours Between 1 July 2017 and 30 June Between 1 July 2017 and 30 June hours 2018 Between 1 July 2016 and 30 June Between 1 Jan 2017and 30 June hours 2017 Prior to 30 June 2016 Prior to 01 Jan hours (approx) Please complete the below and return to apprentice@mpaskills.com.au Student Name: Company Name: Student Supervisor Name: Supervisor Address: Supervisor TL Number: Supervisor Gas Permit Number: Supervisor Signature: Date: Student Signature: Date: There is an annual fee of 50 for this online service. Invoices will be issued prior to day one of training. Invoices must be paid prior to commencing. X:\Skill Centre\Website\Apprentieship\CPC32413 Training Information 2018.docx Page 9 of 6 21-May-18 3:32 PM

10 MPA SKILLS FLIGHT TRAVEL FORM Apprentice Full Name: Mobile Number: Address: Frequent Flyers # EC: Employer Company Name: Supervisor Name: Mobile Number: Address: Frequent Flyers # EC: Training Stage & Dates: Location: 106 Caledonian Avenue Maylands Date to Perth: AM or PM Flight Dates & Times to PERTH from: Date from Perth: AM or PM Flight Dates & Times from PERTH to: Please be aware if the travel arrangements have been made for your apprentice and they are cancelled/suspended you will be required to pay back the cost of the flights. If you change your flights after confirmation of your booking, you will be required to pay the difference. For more information on travel please log onto: es/default.aspx Employer Name Employer Signature Date Please to: apprentice@mpaskills.com.au X:\Skill Centre\Website\Apprentieship\CPC32413 Training Information 2018.docx Page 10 of 6 21-May-18 3:32 PM

11 Fees are subject to Change. RTO 1892 CPC32413 Certificate III Plumbing Fees /12/2017 White Card (CPCWHS1001): Students must have a White Card prior to commencing training. Restricted Gas Course Students who do not have their Restricted Gas Permit will need to attend the Restricted Gas Permit Course 6 Weeks Prior to the Stage Training. This course is invoiced separately and is an Energy Safety Requirment. Student can not attend training without a Permit Restricted Gas Permit UNIT CODE Energy Safety Energy Safety Energy Safety UNIT DESCRIPTION Gas Legislation Gas Safety Gas Combustion & Fluing Course Cost My Profiling MPA Skills are now going paperless with the Gas Workplace Log Book. To monitor your progress the online Gas Workplace Log Book will state the work tasks to be completed with verification by recording the Notice of Completion Numbers. Energy Safety requires trainees to record a number hours of gas related work tasks under supervision, the exact number of hours is dependent on when the apprenticeship contract was signed or training commenced. Please see the table below. My Profiling Annual Fee Annual Fee X:\Skill Centre\2018 Scheduling\DRAFT - Plumbing Schedule CPC32413 Page 1 of 18 17/12/2017

12 Fees are subject to Change. RTO 1892 STAGE 1 Units - CPC32413 Certifcate III in Plumbing 2.5 Week Block Apprentices, Traineeships & Priority Industry Qualifications Category UNIT CODE UNIT DESCRIPTION Census Day Nominal Hrs Course Fee Resource Fee Week 1 Tue C CPCPCM2043A Carry out WHS requirements Day Wed CPCPCM2046A Use plumbing hand and power tools Day Thurs CPCPCM2045A Handle and store plumbing materials Day Fri C HLTAID003 Provide basic emergency life support Day Tue CPCPCM2052A Weld using oxy-acetylene equipment Day Wed C CPCPCM2039A Carry out interactive workplace communication Day Thur C CPCPCM2041A Work effectively in the plumbing and services sector Day Fri CPCPCM2054A Carry out simple concreting and rendering Day Mon CPCPCM2050A Mark out materials Day Tue to Wed Week 2 Week 3 CPCPCM2048A Cut and join sheet metal Day Total Hrs Total Course Total Resource Total Fees Payable (Course Fee 533 plus Resource fee 169) Total Fees with Concession Card (30% of Course fee 160 plus Reource Fee 169) Total Fees with Age concession (Born on or after 1 July 2000) = Max Course Fee 420 & Resource Fee Withdrawal/Census Date: Each unit that you study has its own Census Date. It's important to know your Census Date. This is the deadline you can withdraw from your enrolment and still obtain a refund. The date is calculated at no less than 20% of the way through the period during which that unit is undertaken. Text Books Required for this Stage (Books can be purchased from our bookshop on Day one of the course) AS3500 Plumbing and Drainage Parts Gas Standards Regulations Cengage: Basic Plumbing Services Skills X:\Skill Centre\2018 Scheduling\DRAFT - Plumbing Schedule CPC32413 Page 2 of 18 17/12/2017

13 Fees are subject to Change. RTO Week Block STAGE 2 Units - CPC32413 Certifcate III in Plumbing Apprentices, Traineeships & Priority Industry Qualifications Category UNIT CODE UNIT DESCRIPTION Census Day Nominal Hrs Course Fee Resource Fee Week 1 Tue Wed Thur to Fri Mon - Tues Mon - Tues C CPCPCM2040A Read plans and calculate plumbing quantities Day CPCCCM2010B Work safely at heights Day CPCPCM2055A Work safely on roofs Day CPCPCM3023A CPCPCM2049A CPCPCM2053A Wed CPCPCM2047A Fabricate and install non-ferrous pressure piping Week 2 Cut using oxy-lpg-acetylene equipment Weld using manual metal arc welding equipment Carry out levelling Day Day Day Day Thur RIICCM210D Install trench support Day Fri CPCPDR2024A Install stormwater and sub-soil drainage systems Day CPCPDR2025A Drain work site Day Total Total Total Hrs Course Resource Total Fees Payable (Course Fee 354 plus Resource fee 140) Total Fees with Concession Card (30% of Course fee plus Reource Fee 140) Total Fees with Age concession (Born on or after 1 July 2000) = Max Course Fee 420 & Resource Fee Withdrawal/Census Date: Each unit that you study has its own Census Date. It's important to know your Census Date. This is the deadline you can withdraw from your enrolment and still obtain a refund. The date is calculated at no less than 20% of the way through the period during which that unit is undertaken. Text Books Required for this Stage (Books can be purchased from our bookshop on Day one of the course) AS3500 Plumbing and Drainage Parts Gas Standards Regulations X:\Skill Centre\2018 Scheduling\DRAFT - Plumbing Schedule CPC32413 Page 3 of 18 17/12/2017

14 Fees are subject to Change. RTO 1892 STAGE 3 Units - CPC32413 Certifcate III in Plumbing 2 Week Block Apprentices, Traineeships & Priority Industry Qualifications Category UNIT CODE UNIT DESCRIPTION Census Day Nominal Hrs Course Fee Resource Fee Week 1 Fri CPCPRF3022A Fabricate and install roof drainage components Day Week 2 Mon CPCPRF2023A Collect and store roof water Day Tue to Wed Thur - Fri Thur - Fri CPCPWT3025A Install water pumpsets Day Thur - Fri CPCPWT3020A Connect and install storage tanks to a domestic water supply Locate and clear blockages CPCPDR2021A CPCPCM3022A Day Day Weld polyethylene and polypropylene pipes using fusion method Day CPCPWT3027A Connect irrigation systems from drinking water supply Day Please Note: Fees are subject to Change. RTO 1892 Total Fees Payable (Course Fee 384 plus Resource fee 220) Total Fees with Concession Card (30% of Course fee 115 plus Reource Fee 220) Total Fees with Age concession (Born on or after 1 July 2000) = Max Course Fee 384 & Resource Fee 220) Total Total Total Hrs Course Resource Withdrawal/Census Date: Each unit that you study has its own Census Date. It's important to know your Census Date. This is the deadline you can withdraw from your enrolment and still obtain a refund. The date is calculated at no less than 20% of the way through the period during which that unit is undertaken. Text Books Required for this Stage (Books can be purchased from our bookshop on Day one of the course) AS3500 Plumbing and Drainage Parts Gas Standards Regulations Cengage: Roof Plumbing Cengage: Water Supply X:\Skill Centre\2018 Scheduling\DRAFT - Plumbing Schedule CPC32413 Page 4 of 18 17/12/2017

15 3 Week Block Tue CPCPDR3021A Wed to Thur Wed to Fri Wed Wed to Thur UNIT CODE UNIT DESCRIPTION Census Day CPCPDR3022A CPCPDR2026A CPCPSN3022A Nominal Hrs Course Fee Resource Fee Plan layout of a residential sanitary drainage system Day Install below ground sanitary drainage systems Day Install prefabricated inspection openings and enclosures Day Install discharge pipes Day CPCPDR2022A Install domestic treatment plants Day CPCPDR3023A Install on-site disposal systems Day CPCPSN3024A Install and fit off sanitary fixtures Day Fri CPCPWT3021A Set out and install water services Day Week 3 Mon - Tue Wed - Thur Thur Fees are subject to Change. RTO 1892 STAGE 4 Units - CPC32413 Certifcate III in Plumbing CPCPWT3023A Install and commission water heating systems Day CPCPWT3022A Install and adjust water service controls and devices Day CPCPWT3026A Fit off and commission heated and cold water services Day Fri C CPCPGS3057A Size consumer gas piping systems Day Total Fees Payable (Course Fee 819 plus Resource fee 306) Total Fees with Concession Card (30% of Course fee 246 plus Reource Fee 306) Total Fees with Age concession (Born on or after 1 July 2000) = Max Course Fee 420 & Resource Fee 306) Apprentices, Traineeships & Priority Industry Qualifications Category Week 1 Week 2 1, Total Total Total Hrs Course Resource Withdrawal/Census Date: Each unit that you study has its own Census Date. It's important to know your Census Date. This is the deadline you can withdraw from your enrolment and still obtain a refund. The date is calculated at no less than 20% of the way through the period during which that unit is undertaken. Text Books Required for this Stage (Books can be purchased from our bookshop on Day one of the course) AS3500 Plumbing and Drainage Parts Gas Standards Regulations 1999 Health (Treatment of Sewerage & Disposal of Effluent Liquid) AS5601 Gas Installation 2013 Plumbers Licensing & Plumbing Standards Regulations 2000 Cengage: Sanitary/Drainage Cengage: Water X:\Skill Centre\2018 Scheduling\DRAFT - Plumbing Schedule CPC32413 Page 5 of 18 17/12/2017

16 2 Week Block UNIT CODE UNIT DESCRIPTION Census Day Nominal Hrs Course Fee Resource Fee Tue CPCPSN3023A Fabricate and install sanitary stacks Day Wed to Fri CPCPSN3011B Plan layout of a residential sanitary plumbing system Day Tue CPCPSN3025A Install pre-treatment facilities Day Wed to Thur Fees are subject to Change. RTO 1892 STAGE 5 Units - CPC32413 Certifcate III in Plumbing CPCPFS3031A Fabricate and install fire hydrant and hose reel systems Apprentices, Traineeships & Priority Industry Qualifications Category Week 1 Week 2 Day Thur C CPCPGS3049A Install Type A gas appliance flues Day Fri CPCPCM3021A Flash penetrations through roofs and walls Day Total Hrs Total Total Course Resource Total Fees Payable (Course Fee 345 plus Resource fee 353) Total Fees with Concession Card (30% of Course fee 104 plus Reource Fee 353) Total Fees with Age concession (Born on or after 1 July 2000) = Max Course Fee 345 & Resource Fee 353) Withdrawal/Census Date: Each unit that you study has its own Census Date. It's important to know your Census Date. This is the deadline you can withdraw from your enrolment and still obtain a refund. The date is calculated at no less than 20% of the way through the period during which that unit is undertaken. Text Books Required for this Stage (Books can be purchased from our bookshop on Day one of the course) AS3500 Plumbing and Drainage Parts Cengage: Sanitary/Drainage Gas Standards Regulations 1999 Plumbers Licensing & Plumbing Standards Regulations 2000 AS5601 Gas Installation X:\Skill Centre\2018 Scheduling\DRAFT - Plumbing Schedule CPC32413 Page 6 of 18 17/12/2017

17 Wed Thurs Fri 4 Week Block UNIT CODE UNIT DESCRIPTION Census Day Nominal Hrs Course Fee Resource Fee C CPCPGS3048A Install gas pressure control equipment Day C CPCPGS3055A Install gas sub-meters Day C C CPCPGS3059A CPCPGS3057A Install LPG storage of aggregate storage capacity up to 500 litres Size consumer gas piping systems (Inv. Stage 5) Day Day Mon C CPCPGS3056A Install gas piping systems Day Tue C CPCPGS3051A Purge consumer piping Day Tue to Wed Thur Fri M - T Fri C CPCPGS3061A Install and commission Type A gas appliances Day C CPCPGS3052A Maintain type A gas appliances Day C C C Fees are subject to Change. RTO 1892 CPCPGS3053A CPCPGS3054A CPCPGS3049A STAGE 6 Units - CPC32413 Certifcate III in Plumbing Disconnect and reconnect Type A gas appliances Calculate and install natural ventilation for Type A gas appliances Install Type A gas appliance flues (Inv. Stage 4) Day Day Day C CPCPGS3059A Install LPG storage of aggregate storage capacity up to 500 litres Continued on from week 1 Friday C CPCPGS3046A Install LPG systems in caravans, mobile homes and mobile workplaces Day C CPCPGS3047A Install LPG systems in marine craft Day Week 3 C Practical Component Week 4 C CPCPGS4011C Design and Size consumer gas installations Day Total Fees Payable (Course Fee 590 plus Resource fee 333) Total Fees with Concession Card (30% of Course fee 177 plus Reource Fee 333) Total Fees with Age concession (Born on or after 1 July 2000) = Max Course Fee 420 & Resource Fee 333) Apprentices, Traineeships & Priority Industry Qualifications Category Week 1 Gas Revison - Including Recap of the Gas Standards Regulations 1999, Gas constituents and characteristics, Gas industry workplace safety fuel gasses, Gas distribution systems & Combustion principals Week 2 AS3500 Plumbing and Drainage Parts 0-4 Gas Standards Regulations Total Total Total Hrs Course Resource Withdrawal/Census Date: Each unit that you study has its own Census Date. It's important to know your Census Date. This is the deadline you can withdraw from your enrolment and still obtain a refund. The date is calculated at no less than 20% of the way through the period during which that unit is undertaken. Text Books Required for this Stage (Books can be purchased from our bookshop on Day one of the course) Cengage: Gas Services X:\Skill Centre\2018 Scheduling\DRAFT - Plumbing Schedule AS5601 CPC32413 Gas Installation Page 7 of 18 17/12/2017

18 Fees are subject to Change. RTO Week Block GAP Units - CPC32413 Certifcate III in Plumbing **For students who previously completed a Pre Apprenticeship. These units must be completed prior to stage 3 Apprentices, Traineeships & Priority Industry Qualifications Category UNIT CODE UNIT DESCRIPTION Census Day Week 1 Nominal Hrs Course Fee Resource Fee Mon CPCPCM2045A Handle and store plumbing materials Day Tue CPCPCM2039A Carry out interactive workplace communication Day Wed CPCPCM2054A Carry out simple concreting and rendering Day Wed - Thur CPCPCM3023A Fri CPCPCM2049A Mon - Tue Tues - Wed Class / RIICCM210D CPCPDR2024A Fabricate and install non-ferrous pressure piping Day Cut using oxy-lpg-acetylene equipment Day Install trench support Day Install stormwater and sub-soil drainage systems Week 2 Day CPCPDR2025A Drain work site Day Total Total Total Hrs Course Resource Total Fees Payable (Course Fee 306 plus Resource fee 109) Total Fees with Concession Card (30% of Course fee 92 plus Reource Fee 109) Total Fees with Age concession (Born on or after 1 July 2000) = Max Course Fee 306 & Resource Fee 109) Withdrawal/Census Date: Each unit that you study has its own Census Date. It's important to know your Census Date. This is the deadline you can withdraw from your enrolment and still obtain a refund. The date is calculated at no less than 20% of the way through the period during which that unit is undertaken. Text Books Required for this Stage (Books can be purchased from our bookshop on Day one of the course) AS3500 Plumbing and Drainage Parts 0-4 Cengage: Basic Plumbing Services Skills Gas Standards Regulations X:\Skill Centre\2018 Scheduling\DRAFT - Plumbing Schedule CPC32413 Page 8 of 18 17/12/2017

19 Fees are subject to Change. RTO 1892 Locate & Connect - CPC32413 Certifcate III in Plumbing **For students who completed only stage 3 in 2017 and not stage Week Block Apprentices, Traineeships & Priority Industry Qualifications Category Class / Bays Mon - Tue CPCPDR2021A Mon - Tue UNIT CODE UNIT DESCRIPTION Census Day Locate and clear blockages Week 1 Nominal Hrs Course Fee Resource Fee Day CPCPWT3027A Connect irrigation systems from drinking water supply Day Total Fees Payable (Course Fee 59 plus Resource fee 22) Total Fees with Concession Card (30% of Course fee 18 plus Reource Fee 22) Total Fees with Age concession (Born on or after 1 July 2000) = Max Course Fee 420 & Resource Fee 22) Total Total Total Hrs Course Resource Withdrawal/Census Date: Each unit that you study has its own Census Date. It's important to know your Census Date. This is the deadline you can withdraw from your enrolment and still obtain a refund. The date is calculated at no less than 20% of the way through the period during which that unit is undertaken. Text Books Required for this Stage (Books can be purchased from our bookshop on Day one of the course) AS3500 Plumbing and Drainage Parts Cengage: Water Supply X:\Skill Centre\2018 Scheduling\DRAFT - Plumbing Schedule CPC32413 Page 9 of 18 17/12/2017