Build the team you want with the skills they need Plumbing & Gas Industry Training. TNE. Smart Move.

Transcription

1 Build the team you want with the skills they need Plumbing & Gas Industry Training Are you looking for quality training in the plumbing or gas supply industry? TAFE New England are able to offer specialised and customised training for the plumbing and gas supply industry. We work with your business to ensure your team are appropriately trained for the workplace, and able to work safely, effectively and independently. Qualifications available CPC32413 Certificate III in Plumbing CPC40312 Certificate IV in Plumbing CPC32612 Certificate III in Roof Plumbing UEG30114 Certificate III in Gas Supply Industry Operations UEG40114 Certificate IV in Gas Supply Industry Operations CPC32713 Certificate III in Gas Fitting The TNE difference TNE is the only Registered Training Organisation in NSW with a Smart and Skilled contract to deliver Gas Supply Industry Operations training. Our qualified, industry-experienced staff can customise training to the needs of your employees. We partner with you to ensure you are provided with information on incentives, including recognition of prior learning or workplace experience. For more information call: Head Teacher Michael Burn michael.burn2@tafensw.edu.au P TNE. Smart Move. E info@tne.edu.au W ARMIDALE > BOGGABILLA > COONABARABRAN > GLEN INNES > GUNNEDAH INVERELL > MOREE > NARRABRI > QUIRINDI > TAMWORTH > TENTERFIELD

2 Certificate III in Plumbing COURSE OVERVIEW This qualification provides a trade outcome in plumbing. Occupational titles may include: Plumber Plumber and drainer Plumber and gasfitter Gasfitter Roof plumber CAREER OPPORTUNITIES Further training pathways from this qualification include CPCP40912 Certificate IV in Plumbing and Services NRT. UNIT SELECTIONS (THE NUMBER OF UNITS TO BE COMPLETED WILL VARY DEPENDING ON THE STREAMS SELECTED) The qualification has core and elective units of competency requirements that cover common and specialist skills for the plumbing industry in six specialist streams. A minimum of four of the six plumbing streams must be selected: Stream 1 Water Stream 2 Sanitary Stream 3 Drainage Stream 4 Mechanical services Stream 5 Roofing Stream 6 Gas services The plumbing industry strongly affirms that training and assessment leading to recognition of skills must be undertaken in a real or very closely simulated workplace environment and this qualification requires all units of competency to be delivered in this context. Elective units will be negotiated at the time of enrolment. For further information on this qualification s packaging rules (Stream Core Units and Elective choice requirements) and the electives available please refer to TAFE NSW - New England Institute RTO CODE ABN NATIONAL COURSE CODE: CPC32413 COST: $2,000 (GST Free) NSW government subsidised fee $7,500 (GST Free) Non subsidised fee Concessions and exemptions are available for eligible students START DATE: Block Release - 2 March years - Part time LOCATIONS: Tamworth ENTRY REQUIREMENTS: Completion of the general induction training program specified by the National Code of Practice for Induction Training for Construction Work (ASCC 2007) is required before entering a construction work site. Achievement of unit CPCCOHS1001A covers this requirement. ENROL NOW Online at Call RECOGNITION OF PRIOR LEARNING Recognition may allow you to complete your qualification faster. TAFE NSW recognises the skills and knowledge that you may have gained through previous studies, the workplace and life experiences. You may be entitled to gain Recognition that will exempt you from attending one or more units. It is possible to obtain Recognition for up to 100% of the requirements for a course award. For further information about Recognition, please contact TNE on info@tne.edu.au Visit your local campus p e info@tne.edu.au w armidale > boggabilla > coonabarabran > glen innes > gunnedah > inverell > moree > narrabri > quirindi > tamworth > tenterfield S1/15 V1 Printed brochures are regarded as uncontrolled

3 COURSE AVAILABILITY CAMPUS START DATE STUDY OPTIONS ATTENDANCE CONTACT Tamworth 2 March Block Release Block Release - 5 days per week, every 6 weeks Monday 8am 5pm Tuesday 8am 5pm Michael Burn: michael.burn2@det.nsw.edu.au Wednesday 8am 5pm Thursday 8am 5pm Friday 8am 12pm ADDITIONAL COURSE COSTS ITEM Resource package Project materials COST $100 per year $100 per year ADDITIONAL REQUIREMENTS Personal Protective Clothing Equipment Students will be required to bring the following personal protection clothing and equipment (PPCE) to undertake practical training & assessment Safety glasses AS/NZ s 1337 (clear) Leather work boots AS/NZ s 2210 Ear plugs or ear muffs AS/NZ s 1270 Long-sleeve shirt (cotton,) long trousers (cotton drill or denim) Items must be in good condition and meet Australian Standards Publications HB39 AS/NZS 3500 All Parts AS/NZS 5601 All Parts AS 1596 AS3814 AS1547 AS2118 All parts AS2441 Drawing equipment board, set squares, compass, pencils 6H 2B, coloured Artline pens 0.4mm red, black, green, blue, yellow, purple, orange and brown TAFE NSW FEE INFORMATION The amount you will pay to study at TNE will depend on where you live and/or work. This training is subsidised by the NSW Government. The fee that is displayed is the price for a learner who meets the Smart and Skilled eligibility criteria and is completing their first full qualification. The fee you pay may be lower or higher depending on your personal circumstances and eligibility for a subsidised place, a fee concession or a fee exemption. In some cases there are limited NSW government subsidised places available. Please contact our Customer Support Team on for your personal fee assessment and to find out if you are eligible for a NSW Government subsidised place. We can also discuss payment options with you. If you do not gain a NSW government subsidised place you may be able to enrol and pay the non-subsidised fee. There are no fee exemptions, concessions or subsidies available for this option. Your tuition fee includes all essential study materials. Extra study resources may be available to enhance your learning. Contact our Customer Support Team on for more information about payment options. Fees, charges and course offerings are subject to change.

4 Certificate IV in Plumbing and Services COURSE OVERVIEW The Certificate IV in Plumbing provides skills and knowledge for: Plumbers who manage a plumbing business (Plumbing and Services Management stream) Specialist plumbing services tradespersons and operators seeking to deepen their technical Skills (Plumbing and Services Operations stream) Specialist hydraulic consultants (Hydraulic Services Design stream) Experienced fire operators with responsibility for project design and supervision (Fire Services stream) Experienced plumbing service operators with responsibility for project design and supervision (Air Conditioning and Mechanical Services stream) This qualification has core and elective unit of competency requirements that cover common skills for the plumbing industry, as well as the four specialist streams and a range of elective options. The plumbing industry strongly affirms that training and assessment leading to recognition of skills must be undertaken in a real or very closely simulated workplace environment and this qualification requires all units of competency to be delivered in this context. This qualification comprises of 15 units of competency. (please refer below for unit information) CAREER OPPORTUNITIES Further training pathways from this qualification include: CPC50412 Diploma of Plumbing Services NRT. Occupational titles may include: Plumbing contractor Fire services supervisor Air conditioning technician Specialist hydraulic designer CORE UNITS (10 UNITS MUST BE COMPLETED) CPCCBC4012B Read and interpret plans and specifications CPCPDR4011B Design and size sanitary drainage systems CPCPDR4012B Design and size stormwater drainage systems CPCPDR4013B Design and size domestic treatment plant disposal systems TAFE NSW - New England Institute RTO CODE ABN NATIONAL COURSE CODE CPC40912 COST: $ 2,420 (GST Free) NSW government subsidised fee $ 4,500 (GST Free) Non subsidised fee Concessions and exemptions are available for eligible students START DATE: Block release: 23 February 2015 Night Class: 4 February 2015 LOCATIONS: Tamworth Campus Plumbing Section F Block, 13 Janison Street ENTRY REQUIREMENTS: Completion of the general induction training program specified by the National Code of Practice for Induction Training for Construction Work (ASCC 2007) is required before entering a construction work site. Achievement of unit CPCCOHS1001A covers this requirement. CPCPGS4011C CPCPSN4011B CPCPWT4011B Design and size consumer gas installations Design and size sanitary plumbing systems Design and size heated and cold water services and systems RECOGNITION OF PRIOR LEARNING Recognition may allow you to complete your qualification faster. TAFE NSW recognises the skills and knowledge that you may have gained through previous studies, the workplace and life experiences. You may be entitled to gain Recognition that will exempt you from attending one or more units. It is possible to obtain Recognition for up to 100% of the requirements for a course award. For further information about Recognition, please contact TNE on ENROL NOW Online at Call info@tne.edu.au Visit your local campus p e info@tne.edu.au w armidale > boggabilla > coonabarabran > glen innes > gunnedah > inverell > moree > narrabri > quirindi > tamworth > tenterfield S1/15 V4 Printed brochures are regarded as uncontrolled

5 BSBOHS403B BSBSMB401A CPCCBC4034A CPCPCM4011A CPCPCM4012A CPCPRF4011B CPCPWT4022A CPCPWT4023A Identify hazards and assess OHS risks Establish legal and risk management requirements of small business Apply codes and standards to building trade and services contracting Carry out work-based risk control processes Estimate and cost work Design and size roof drainage systems Commission and maintain backflow prevention devices Commission and maintain hot and heated water temperature control devices COURSE AVAILABILITY CAMPUS START DATE STUDY OPTIONS ATTENDANCE Block release 5 days per week, 6 week rotation Tamworth Block release: 23 Feb 2015 Night class: 4 Feb 2015 Part time for 2 years - Face to face Monday to Thursday, 8am - 5pm OR Weekly every Wednesday, 6pm -10pm (Subject to numbers) ADDITIONAL COURSE COSTS ITEM Resource package Project materials COST $150 per year $150 per year ADDITIONAL REQUIREMENTS Personal Protective Clothing Equipment Safety Glasses AS/NZ s1337 Ear Plugs or Ear Muffs AS/NZ s1270 Work Boots or Shoes AS/NZ s2210 Long-sleeve Shirt (cotton) Long Trousers (cotton drill or Denim) All in good condition Publications AS/NZS 3500 All Parts AS/NZS 5601 All Parts AS 1596 AS3814 AS1547 AS2118 all parts AS2441 AS2419 HB39 Drawing Equipment Board, Set Squares, Compass, Pencils 6H 2B, Coloured Artline pens 0.4mm Red, Black, Green, Blue, Yellow, Purple, Orange and Brown, Text Books. TAFE NSW FEE INFORMATION The amount you will pay to study at TNE will depend on where you live and/or work. This training is subsidised by the NSW Government. The fee that is displayed is the price for a learner who meets the Smart and Skilled eligibility criteria and is completing their first full qualification. The fee you pay may be lower or higher depending on your personal circumstances and eligibility for a subsidised place, a fee concession or a fee exemption. In some cases there are limited NSW government subsidised places available. Please contact our Customer Support Team on for your personal fee assessment and to find out if you are eligible for a NSW Government subsidised place. We can also discuss payment options with you. If you do not gain a NSW government subsidised place you may be able to enrol and pay the non-subsidised fee. There are no fee exemptions, concessions or subsidies available for this option. Your tuition fee includes all essential study materials. Extra study resources may be available to enhance your learning. Contact our Customer Support Team on for more information about payment options. Fees, charges and course offerings are subject to change.

6 Certificate III in Roof Plumbing COURSE OVERVIEW The Certificate III in Roof Plumbing provides a trade outcome in roof plumbing, and covers common skills for the plumbing industry, as well as roof plumbing specialist units of competency. The plumbing industry affirms training and assessment leading to recognition of skills must be undertaken in a real or very closely simulated workplace environment and this qualification requires all units of competency to be delivered in this context. Completion of the general induction training program specified by the National Code of Practice for Induction Training for Construction Work (ASCC 2007) is required before entering a construction work site. Achievement of unit CPCCOHS1001A covers this requirement. To achieve this qualification, the candidate must demonstrate competency in 25 units of competency: 22 core units 3 elective units Some units in this qualification may have prerequisite requirements, which must be met when packaging the qualification. Users are referred to the list of CPC08 units with prerequisite unit requirements available in this Training Package for this purpose. This qualification comprises of 25 units of competency. (please refer below for unit information) CAREER OPPORTUNITIES Occupational titles may include: Roof plumber. CORE UNITS (22 UNITS must be COmPlETEd) CPCCCm2008b CPCCCm2010b CPCCCm3001C CPCPCm2039A CPCPCm2040A CPCPCm2041A CPCPCm2043A CPCPCm2045A CPCPCm2046A CPCPCm2047A Erect and dismantle restricted height scaffolding Work safely at heights Operate elevated work platforms Carry out interactive workplace communication Read plans and calculate plumbing quantities Work effectively in the plumbing and services sector Carry out WHS requirements Handle and store plumbing materials Use plumbing hand and power tools Carry out levelling TAFE NSW - New England Institute RTO COdE AbN NATIONAl COURSE COdE CPC32612 COST: $ 1,670 (GST Free) NSW government subsidised fee $ 6,000 (GST Free) Non subsidised fee Concessions and exemptions are available for eligible students START date: 2 February 2015 locations: Tamworth Campus ENTRy REqUIREmENTS: Completion of the general induction training program specified by the National Code of Practice for Induction Training for Construction Work (ASCC 2007) is required before entering a construction work site. Achievement of unit CPCCOHS1001A covers this requirement. ENROl NOW Online at Call info@tne.edu.au Visit your local campus RECOGNITION OF PRIOR learning Recognition may allow you to complete your qualification faster. TAFE NSW recognises the skills and knowledge that you may have gained through previous studies, the workplace and life experiences. You may be entitled to gain Recognition that will exempt you from attending one or more units. It is possible to obtain Recognition for up to 100% of the requirements for a course award. For further information about Recognition, please contact TNE on p e info@tne.edu.au w armidale > boggabilla > coonabarabran > glen innes > gunnedah > inverell > moree > narrabri > quirindi > tamworth > tenterfield S1/15 V4 Printed brochures are regarded as uncontrolled

7 CPCPCM2048A CPCPCM2050A CPCPCM2055A CPCPCM3021A CPCPRF2022A CPCPRF3021A CPCPRF3022A CPCPRF3023A CPCPRF3024A CPCPRF3025A CPCPRF3026A HLTFA211A Cut and join sheet metal Mark out materials Work safely on roofs Flash penetrations through roofs and walls Select and install roof sheeting and wall cladding Receive roofing materials Fabricate and install roof drainage components Fabricate and install external flashings Install roof components Install roof coverings to curved roof structures Install composite roof systems Provide basic emergency life support ELECTIVE UNITS (3 UNITS MUST BE COMPLETED) CPCPCM2052A Weld using oxy-acetylene equipment CPCPCM2053A Weld using manual metal arc welding equipment CPCPCM2054A Carry out simple concreting and rendering CPCPCM3022A Weld polyethylene and polypropylene pipes using fusion method CPCPCM3023A Fabricate and install non-ferrous pressure piping CPCPDR2021A Locate and clear blockages CPCPDR2024A Install stormwater and sub-soil drainage systems CPCPDR2025A Drain work site CPCPDR2026A Install prefabricated inspection openings and enclosures CPCPRF2023A Collect and store roof water CPCPRF2024A Fabricate roof coverings for curved structures MEM05050B Perform routine gas metal arc welding RIICCM210A Install trench support COURSE AVAILABILITY CAMPUS START DATE STUDY OPTIONS ATTENDANCE INFORMATION SESSION Tamworth 20 April 2015 Part time for 1 year Face to face Block release 5 days per week, 6 week rotation Monday to Friday - 8am 5pm To be advised ADDITIONAL COURSE COSTS ITEM Resource Package COST $200 per year Project Materials $200 per year ADDITIONAL REQUIREMENTS Personal Protective Clothing Equipment Safety Glasses AS/NZ s1337 Ear Plugs or Ear Muffs AS/NZ s1270 Work Boots or Shoes AS/NZ s2210 Long-sleeve Shirt (cotton) Long Trousers (cotton drill or Denim) (All in good condition) Publications HB39 AS/NZS p All 448 Parts 176 e info@tne.edu.au w Drawing Equipment Board, Set Squares, Compass, Pencils 6H 2B, Coloured Artline pens 0.4mm Red, Black, Green, Blue, Yellow, Purple,

8 Certificate III in Gas Supply Industry Operations COURSE OVERVIEW This qualification provides the skills needed to conduct Gas Supply Industry activities including installation, maintenance, fault find and repair, operations of distribution and transmission gas pipelines, cylinders and associated equipment. This is an Australia Qualification Framework (AQF) Level 3 qualification and provides the required knowledge and skills to carry out independent work activities. CAREER OPPORTUNITIES Further training pathways from this qualification include Certificate IV Gas Supply Industry Operations (UEG40114). CORE UNITS UEGNSG005A UEGNSG132A UEGNSG133A UEGNSG141A BSBFLM303C BSBFLM312C BSBWHS301A BSBWOR301B ELECTIVE UNITS Prepare to work in the gas industry Carry out basic work activities in a gas industry work environment Comply with environmental policies and procedures in the utilities industry Apply Workplace Health and Safety regulations, codes and practices in the gas supply industry Contribute to effective workplace relationships Contribute to team effectiveness Maintain workplace safety Organise personal work priorities and development A combination of Elective competency standard units to achieve a total weighting of 660 points in accordance with the Elective Competency Standard Units tables. Elective units will be negotiated at the time of enrolment. For further information on this qualification s packaging rules (elective choice requirements) and the electives available please refer to Details/UEG TAFE NSW - New England Institute RTO COdE ABN NATIONAL COURSE COdE UEG30114 COST: $ 2,000 (GST Free) NSW government subsidised fee $ 7,500 (GST Free) Non subsidised fee Concessions and exemptions are available for eligible students START date: 9 February 2015 LOCATIONS: Tamworth Campus Plumbing Section F Block, 13 Janison Street ENTRy REqUIREMENTS: There are no entry requirements for this qualification. ENROL NOW Online at Call info@tne.edu.au Visit your local campus RECOGNITION OF PRIOR LEARNING Recognition may allow you to complete your qualification faster. TAFE NSW recognises the skills and knowledge that you may have gained through previous studies, the workplace and life experiences. You may be entitled to gain Recognition that will exempt you from attending one or more units. It is possible to obtain Recognition for up to 100% of the requirements for a course award. For further information about Recognition, please contact TNE on p e info@tne.edu.au w armidale > boggabilla > coonabarabran > glen innes > gunnedah > inverell > moree > narrabri > quirindi > tamworth > tenterfield S1/15 V4 Printed brochures are regarded as uncontrolled

9 RIICCM210D Install trench support COURSE AVAILABILITY CAMPUS START DATE Tamworth 27 April 2015 STUDY OPTIONS ATTENDANCE INFORMATION SESSION Part time over 3 years Face to face Block release 4 days per week, 6 week rotation Monday to Thursday - 8am - 5pm To be advised ADDITIONAL COURSE COSTS ITEM COST Course related charges $600 ADDITIONAL REQUIREMENTS Personal Protective Clothing Equipment Safety Glasses AS/NZ s1337 Ear Plugs or Ear Muffs AS/NZ s1270 Work Boots or Shoes AS/NZ s2210 Long-sleeve Shirt (cotton) Long Trousers (cotton drill or Denim) All in good condition. Publications AS/NZS 5601 All Parts AS1596 AS3814 AS2118 all parts AS2441 AS2419 Drawing Equipment Board, Set Squares, Compass, Pencils 6H 2B, Coloured Artline pens 0.4mm Red, Black, Green, Blue, Yellow, Purple, Orange and Brown, Text Books TAFE NSW FEE INFORMATION The amount you will pay to study at TNE will depend on where you live and/or work. This training is subsidised by the NSW Government. The fee that is displayed is the price for a learner who meets the Smart and Skilled eligibility criteria and is completing their first full qualification. The fee you pay may be lower or higher depending on your personal circumstances and eligibility for a subsidised place, a fee concession or a fee exemption. In some cases there are limited NSW government subsidised places available. Please contact our Customer Support Team on for your personal fee assessment and to find out if you are eligible for a NSW Government subsidised place. We can also discuss payment options with you. If you do not gain a NSW government subsidised place you may be able to enrol and pay the non-subsidised fee. There are no fee exemptions, concessions or subsidies available for this option. Your tuition fee includes all essential study materials. Extra study resources may be available to enhance your learning. Contact our Customer Support Team on for more information about payment options. Fees, charges and course offerings are subject to change.

10 Certificate IV in Gas Supply Industry Operations COURSE OVERVIEW This course provides the skills needed to supervise and conduct Gas Supply Industry activities including installation, diagnostics and maintenance of distribution and transmission gas pipelines, cylinders and associated equipment. This is an Australia Qualification Framework (AQF) Level 4 qualification and provides the required knowledge and skills to carry out specialised and/or skilled routine and non-routine work activities. With this Certificate IV qualification, you will also develop the skills to supervise the work of others. CAREER OPPORTUNITIES Further training pathways from this qualification include Diploma of Gas Supply Industry Operations (UEG50114). CORE UNITS UEGNSG005A UEGNSG132A Prepare to work in the gas industry Carry out basic work activities in a gas industry work environment TAFE NSW - New England Institute RTO COdE ABN NATIONAl COURSE COdE UEG40114 COST: $ 4,220 (GST Free) NSW government subsidised fee $ 7,900 (GST Free) Non subsidised fee Concessions and exemptions are available for eligible students UEGNSG133A UEGNSG141A UEENEEE117A BSBMGT402A BSBWOR402A BSBWOR404B Comply with environmental policies and procedures in the utilities industry Apply Workplace Health and Safety regulations, codes and practices in the gas supply industry Implement and monitor energy sector OHS policies and procedures Implement operational plan Promote team effectiveness Develop Work Priorities START date: 16 February 2015 locations: Tamworth ENTRy REqUIREMENTS: There are no entry requirements for this qualification. ElECTIVE UNITS A combination of Elective competency standard units to achieve a total weighting of 990 points in accordance with the Elective Competency Standard Units tables. Elective units will be negotiated at the time of enrolment. For further information on this qualification s packaging rules (elective choice requirements) and the electives available please refer to Details/UEG ENROl NOW Online at Call info@tne.edu.au Visit your local campus RECOGNITION OF PRIOR learning Recognition may allow you to complete your qualification faster. TAFE NSW recognises the skills and knowledge that you may have gained through previous studies, the workplace and life experiences. You may be entitled to gain Recognition that will exempt you from attending one or more units. It is possible to obtain Recognition for up to 100% of the requirements for a course award. For further information about Recognition, please contact TNE on p e info@tne.edu.au w armidale > boggabilla > coonabarabran > glen innes > gunnedah > inverell > moree > narrabri > quirindi > tamworth > tenterfield S1/15 V4 Printed brochures are regarded as uncontrolled

11 COURSE AVAILABILITY CAMPUS START DATE STUDY OPTIONS ATTENDANCE Tamworth 4 May 2015 Part time over 3 years (or 1 year depending on previous studies) Face to face Block release 4 days per week, 6 week rotation Monday to Thursday - 8am - 5pm ADDITIONAL COURSE COSTS ITEM Resource package COST $150 per year Project materials $150 per year ADDITIONAL REQUIREMENTS Personal Protective Clothing Equipment Safety Glasses AS/NZ s1337 Ear Plugs or Ear Muffs AS/NZ s1270 Work Boots or Shoes AS/NZ s2210 Long-sleeve Shirt (cotton) Long Trousers (cotton drill or Denim) All are to be in good condition. Publications AS/NZS 5601 All Parts AS1596 AS3814 AS2118 all parts AS2441 AS2419 Drawing Equipment Board, Set Squares, Compass, Pencils 6H 2B, Coloured Artline pens 0.4mm Red, Black, Green, Blue, Yellow, Purple, Orange and Brown, Text Books TAFE NSW FEE INFORMATION The amount you will pay to study at TNE will depend on where you live and/or work. This training is subsidised by the NSW Government. The fee that is displayed is the price for a learner who meets the Smart and Skilled eligibility criteria and is completing their first full qualification. The fee you pay may be lower or higher depending on your personal circumstances and eligibility for a subsidised place, a fee concession or a fee exemption. In some cases there are limited NSW government subsidised places available. Please contact our Customer Support Team on for your personal fee assessment and to find out if you are eligible for a NSW Government subsidised place. We can also discuss payment options with you. If you do not gain a NSW government subsidised place you may be able to enrol and pay the non-subsidised fee. There are no fee exemptions, concessions or subsidies available for this option. Your tuition fee includes all essential study materials. Extra study resources may be available to enhance your learning. Contact our Customer Support Team on for more information about payment options. Fees, charges and course offerings are subject to change.

12 About TAFE New England Helping employers secure business success Customised solutions for your business... Let s face it the challenge that most employers face is to find the time to work on their business rather than in their business. You know training is an investment in your staff and in your future business success, but it can be challenging to get it happening. TNE is respected as a provider of world-class vocational education and training, and we are wellequipped to work with your business, whether big or small. Our Business Relationship Consultants can work with your business to deliver training across a broad range of industry areas - through short courses, online or workplace delivery options. Our teachers are industry-qualified and trained to deliver relevant workplace skills to your staff. We can assign trainers with expertise and experience in your industry to conduct an on-site analysis of your training needs, identify any skills gaps and, importantly, talk to you about what you want. We can then customise a solution to meet your training needs. TNE has a proven track record in customising training solutions to give employees the skills they need to be more efficient and effective in the workplace. We can assign a consultant with expertise and experience in your industry to conduct an on-site analysis of your training needs, identify any skills gaps and, importantly, talk to you about what you want. We then design a customised training solution to match your needs. A customised training solution through TNE has a number of advantages: We examine all aspects of your operation and pinpoint areas that need attention You will see improvements in customer service, work safety practices and productivity You have the opportunity to shape the skills your workforce gains, targeting skills to needs for now and the future We create programs tailored to meet the unique needs of your workforce and your business There is potential to access a range of funding opportunities to help meet some of the costs for eligible courses Improved morale, loyalty and retention, as you demonstrate that you value your team enough to invest in them Your business will have the chance to stay ahead of the competition as you build a capable and qualified team. Talk to one of our Business Relationship Consultants about your needs today on

13 P TNE. Smart Move. E info@tne.edu.au W ARMIDALE > BOGGABILLA > COONABARABRAN > GLEN INNES > GUNNEDAH INVERELL > MOREE > NARRABRI > QUIRINDI > TAMWORTH > TENTERFIELD