The National BIM Library
|
|
- Caroline Blair
- 5 years ago
- Views:
Transcription
1 The National BIM Library BIM Object Guide: Radon Stop 400 Version rd December Version rd December 2012 Page 1 of 9
2 Table of Contents 1.0 Introduction Naming Parameters National BIM Library Parameters Manufacturers Parameters IFC Parameters COBie Parameters Abbreviations... 9 Version rd December 2012 Page 2 of 9
3 1.0 Introduction This guide covers the use of Triton Systems Radon Stop 400 included within the National BIM Library. Triton Systems Radon Stop 400 All products listed below are included in the following file: nbl_mbrn_tritonsystems_radonstop400 nbl_tritonsystems_radonstop400 Version rd December 2012 Page 3 of 9
4 1.1 Naming National BIM Library objects are named to identify their type and configuration. Fields are segregated using an under bar (_) and information within each field is segregated using hyphens (-). Fields are abbreviated to reduce characters and capitals used at the start of each abbreviation to aid readability. File name and objects are named as below: File name Field1 Author_Field2 Category_Field3 Manufacturer_Field4 Product Range Object Field1 Author_Field2 Manufacturer_Field3 Product Version rd December 2012 Page 4 of 9
5 2.0 Parameters Parameters included in the National BIM Library Triton Systems Radon Stop 400 BIM object are as follows: 2.1 National BIM Library Parameters Author BIMObjectName Description Help IssueDate Manufacturer URL NBSDescription NBSReference Version Authors Name. Name of the BIM object as it will appear in Software. Using NBL naming procedure. The full description of a product or system. National BIM Library website. The date the object goes live. Manufacturer s main website link. NBS Uniclass title. NBS Uniclass section/clause number. The version number of the object. 2.2 Manufacturers Parameters MaterialThickness Weight TensileStrength TearResistance Thickness of the material from which the object is constructed. The relative mass or the quantity of matter contained by it, giving rise to a downward force; the heaviness of an object. Measured in units of [g/m²]. The resistance of a material to breaking under tension. Measure in [N/mm²] Measurement of how well a material can withstand the effects of tearing. Measured in units of [N] Version rd December 2012 Page 5 of 9
6 2.3 IFC Parameters Note: IFC definitions have been obtained from BuildingSmart IFC2x3 website ( Material ShearModulus Main material of the covering A measure of the shear modulus of elasticity of the material. Version rd December 2012 Page 6 of 9
7 2.4 COBie Parameters The following COBie parameters have been included within Triton Systems Radon Stop 400 BIM object and can be used to prepare COBie data schedules: AccessibilityPerformance AssetIdentifier BarCode CodePerformance Colour Constituents Cost Documentation DocumentReference Features Finish Grade InstallationDate Accessibility issue(s) which the product satisfies. The asset identifier assigned to an occurrence of a product (prior to handover). The identity of the bar code (or rfid) given to an occurrence of the product. Code Compliance requirement(s) which the product satisfies. Characteristic or primary colour of product. Optional constituent features, parts or finishes. Cost impact of replacement process. Location (Uniform Resource Information) for further product information. Location (Uniform Resource Information) for the source or updates to this product information. Other important characteristics or features relevant to product specification. Characteristic or primary finish of product. Standard grading which the product corresponds. The date that the manufactured item was installed. LifeCyclePhase Life Cycle Phase as defined in ISO Manufacturer MethodOfMeasurement ModelLabel ModelReference The organization that manufactured or assembled the item. Method of measurement The model number assigned by manufacturer. The name used by the manufacturer Version rd December 2012 Page 7 of 9
8 NominalHeight NominalLength NominalWidth Process ProductionYear ReferenceStandard ReplacementCost SerialNumber ServiceLifeDuration ServiceLifeType Shape Size Typically the vertical or secondary characteristic dimension. Typically the larger or primary horizontal dimension. Typically the characteristic or secondary horizontal or characteristic dimension. Specification of process The year of production of the manufactured item. Reference standard(s) to which the product is compliant. An indicative cost for unit replacement. The serial number assigned to an occurrence of a product by the manufacturer. The service life that an artefact is expected to have under current operating conditions. The typical service life that is quoted for an artefact under reference operating conditions. Characteristic shape of product. Characteristic size of product. SustainabilityPerformance Sustainability issue(s) which the product satisfies. TagNumber WarrantyDescription WarrantyDurationLabour WarrantyDurationParts WarrantyGuarantorLabour WarrantyGuarantorParts WarrantyStartDate The tag number assigned to an occurrence of a product Description of the warranty. Duration of labour warranty (years). Duration of parts warranty (years). Organization acting as guarantor of labour warranty. Organization acting as guarantor of parts warranty. The date on which the warranty commences. Version rd December 2012 Page 8 of 9
9 3.0 Abbreviations nbl National BIM Library mbrn Membrane Version rd December 2012 Page 9 of 9
The National BIM Library
The National BIM Library BIM Object Guide: Platon Plaster Base Version 1.0 3 rd December 2012 www.nationalbimlibrary.com Version 1.0 3 rd December 2012 Page 1 of 9 Table of Contents 1.0 Introduction...
More informationThe National BIM Library
The National BIM Library BIM Object Guide: Platon DE25 Green Roof Drainage Membrane Version 1.0 3 rd December 2012 www.nationalbimlibrary.com Version 1.0 3 rd December 2012 Page 1 of 10 Table of Contents
More informationThe National BIM Library
The National BIM Library BIM Object Guide: Triton Aqua Pump Pro Plus Kit Version 1.0 3 rd December 2012 www.nationalbimlibrary.com Version 1.0 3 rd December 2012 Page 1 of 10 Table of Contents 1.0 Introduction...
More informationThe National BIM Library
The National BIM Library BIM Object Guide: Damp-proof lathing Version 1.0 6 th November 2013 www.nationalbimlibrary.com Version 1.0 29 th July 2013 Page 1 of 10 Contents 1.0 Introduction... 3 1.1 Naming...
More informationThe National BIM Library
BIM Object Guide: High density polyethylene (PE-HD) studded sheets Version 1.0 6 th November 2013 www.nationalbimlibrary.com Version 1.0 6th November 2013 Page 1 of 11 Contents 1.0 Introduction... 3 1.1
More informationThe National BIM Library
The National BIM Library BIM Object Guide: Private packaged pumping stations Version 1.0 6 th November 2013 www.nationalbimlibrary.com Version 1.0 6th November 2013 Page 1 of 11 Contents 1.0 Introduction...
More informationThe National BIM Library
The National BIM Library BIM Object Guide: Suspended Metal Ceilings Clip-In Version 1.0 30 th May 2013 www.nationalbimlibrary.com Table of Contents 1.0 Introduction... 3 1.1 Naming... 4 2.0 Parameters...
More informationThe National BIM Library
The National BIM Library Solid Surface Version 1.0 11 th December 2013 www.nationalbimlibrary.com Version 1.0 11th December 2013 Page 1 of 13 Contents 1.0 Introduction... 3 1.1 Naming... 3 2.0 Parameters...
More informationEmployer s. Information Requirements Template
Draft v11 NOT FOR PUBLICATION OR USE Employer s Design/Construction/Operation and supply team Information Requirements Template This template is intended to aid the documentation of the Information Requirements
More informationThe National BIM Library. Drew Wiggett Head of Product Information
The National BIM Library Drew Wiggett Head of Product Information What is BIM? What is BIM? The holding place for a databank of information that can be used through the design, construct and asset management
More informationCONSTRUCTION PRODUCT CONFORMANCE DATA
CONSTRUCTION PRODUCT CONFORMANCE DATA A Manufacturer and Supplier guide to managing product conformance data Prepared by: Building Products Innovation Council Rodger Hills - Executive Officer November
More informationTXST BIM-FM Requirements
CONSTRUCTION STANDARDS GUIDELINES TXST BIM-FM Requirements Table of Contents E.0 Section 0 Executive Summary E.1 Section 1 Strategy and Objectives E.2 Section 2 BIM Execution Plan Exhibit 2.A Sample Project
More informationTurning Over Validated Space & Equipment Data and O&M Documents by Substantial Completion
Turning Over Validated Space & Equipment Data and O&M Documents by Substantial Completion Presenters Tanhia Bejko tanhia.bejko@technipfmc.com TechnipFMC IWMS Manager, Site Services Kristine Fallon, FAIA
More informationNational Institute of Building Sciences
National Institute of Building Sciences Provider Number: G168 Session TH1B: Utilizing Information Technology for Better Building Performance Case Study: COBie from Design to Operations Presented by: Kristine
More informationThe Impact of the UK Government BIM Strategy
The Impact of the UK Government BIM Strategy thinkbim 4 th April 2012 13 April 12012 2010 AEC3 Ltd www.aec3.com Why data not documents? Sharing Strategy: Inter-operability One input, many paths Structured
More informationBIM-MEP AUS SPECIFICATION Passive Chilled Beams
BIM-MEP AUS SPECIFICATION s Issued By: Revision: BIM-MEP AUS 30 Cromwell Street, Burwood 3205 VIC Australia REV B Date Acknowledgements BIM-MEP AUS greatly acknowledges the contributions of the following
More informationCOBie and the Demanding Client
COBie and the Demanding Client Bob Wakelam AEC3 About me Bob Wakelam AEC3 bw@aec3.com 37 years in architecture and construction 30 years in what is now called BIM Joined AEC3 UK Limited in 2010 Involved
More informationDigitising house building
Digitising house building Introductions Adrian Wild, Founder and MD of HBXL group Previously builder and developer for 20+ years Built 80 new homes and 300 extensions/conversions Developed first estimating
More informationBIM-MEP AUS MODELS. Damper Specification. Issued By: BIM-MEP AUS. 30 Cromwell Street, Burwood 3205 VIC Australia. Revision: Initial Release
MODELS Issued By: BIM-MEP AUS 30 Cromwell Street, Burwood 3205 VIC Australia Revision: Initial Release Date Acknowledgements BIM-MEP AUS greatly acknowledges the contributions of the following organisations
More informationWe can find several researches on product models for tunnels. Yabuki et al. (2007) introduced IFC-based product models to represent components of shie
A Feasibility Study on COBie for Tunnel Products Takashi Aruga 1, Takashi Michikawa 2, Yasuo Fujisawa 3 and Nobuyoshi Yabuki 4 1) Dr. Eng., President, Conport Co., Ltd., Hino, Tokyo, Japan. Email: t.aruga@conport.jp
More informationThe Present and Future of BIM in Ireland. Engineers Ireland, November 3 rd, 2016 Roughan & O Donovan Consulting Engineers Aonghus O Keeffe, CEng
The Present and Future of BIM in Ireland Engineers Ireland, November 3 rd, 2016 Roughan & O Donovan Consulting Engineers Aonghus O Keeffe, CEng Overview Roughan & O Donovan The UK Implementation of BIM
More informationNon-destructive Testing of Concrete - Methods of Test. Lecture No. 26
Non-destructive Testing of Concrete - Methods of Test Lecture No. 26 Rebound Hammer (IS 13311( Part 2 ) : 1992) The rebound hammer method could be used for: i) Assessing the likely compressive strength
More informationDELIVERING STRUCTURED DATA. Bobby Gallagher (DFM SYSTEMS)
DELIVERING STRUCTURED DATA Bobby Gallagher (DFM SYSTEMS) What is Structured Data Information Life Cycle Facilities Management Data (FM) Interoperability The cost of Poor Information US Department of Commerce
More informationThe BIM Toolkit. Sarah Delany February 2015 v2.0
The BIM Toolkit Sarah Delany February 2015 v2.0 BIM Government Construction Strategy Completing Level-2 BIM Suite The Missing Pieces The Project Clients Brief Team Industry 2014 2015 Jan Feb Mar Apr May
More informationLINKING BIM TO CAFM. Turning Asset Data into Knowledge
T LINKING BIM TO CAFM Turning Asset Data into Knowledge T CONTENTS INTRODUCTIONS CASE STUDY WHAT IS DATA DELIVERING DATA LINKING BIM TO CAFM SUMMARY T INTRODUCTIONS PART 1 TM WHERE? STRIDE TREGLOWN UWE
More informationAndy Bellerby. Peter Moyes
Andy Bellerby MD, Tekla Peter Moyes Amtech Tekla Tekla develops and markets software products and services for customers core business processes in: construction and energy distribution & infrastructure
More informationThe Edge Protection Federation Containment Systems Product Specification, Test Methods
The Edge Protection Federation Containment Systems Product Specification, Test Methods Revision 2 August 2016 This Standard defines how the Edge Protection Federation defines Containment. This document
More informationProcess mapping Ministry of Justice Jaimie Johnston BIM Task Group, Delivery & Productivity. Bryden Wood Technology Limited 2017
Process mapping Ministry of Justice Jaimie Johnston BIM Task Group, Delivery & Productivity BIS BIM Strategy March 2011 Government as a client can derive significant improvements in cost, value and carbon
More informationBIM-MEP AUS SPECIFICATION
BIM-MEP AUS SPECIFICATION Issued By: Revision: BIM-MEP AUS 30 Cromwell Street, Burwood 3205 VIC Australia F Date Acknowledgements BIM-MEP AUS acknowledges the contributions of the Pump Industry Australia
More informationDelivering Building Information to Owners Birgitta Foster Vice President, Facilities Integration VDCO Tech, Inc.
Delivering Building Information to Owners Birgitta Foster Vice President, Facilities Integration VDCO Tech, Inc. bfoster@vdcotech.com Michael Tardif, Assoc. AIA, LEED AP Senior Partner BLCI Building Life
More informationBLOCKCHAINS IN CONSTRUCTION & INFRASTRUCTURE HELIUM ALLIANCE
BLOCKCHAINS IN CONSTRUCTION & INFRASTRUCTURE HELIUM ALLIANCE DISTRIBUTED DATABASES SUPPLY CHAINS, WHOLE LIFE COSTING & ASSET MANAGEMENT KEEPING COST OS UPDATED FOR NEW STANDARDS COST OS NRM 3 MODULE, RELEASED
More informationStructural Calculations for standard BALCONY 1 system handrail using 55mm diameter posts (48.3mm x 5mm CHS) & 150 x 150 x 15mm base plates
Balcony 1 system handrail PAGE 1 (B1NB55150150BP061016) Structural Calculations for standard BALCONY 1 system handrail using 55mm diameter posts (48.3mm x 5mm CHS) & 150 x 150 x 15mm base plates Our ref:
More information2012 Kristine Fallon Associates, Inc. Complete Facility Lifecycle Management
Complete Facility Lifecycle Management BIM Strategies for Owners KFA BIM Experience Consulted to Revit Technology prior to initial product release Construction phase MEP coordination > 3 million SF GSA
More informationPRODUCT DATASHEET. Confidex SteelBYTE CONTENTS
Jan-10 1 (6) PRODUCT DATASHEET Confidex SteelBYTE CONTENTS 1. PRODUCT DESCRIPTION... 2 1.1 SPECIFICATION DATA... 2 1.2 DIMENSIONS... 2 1.3 ELECTRICAL PERFORMANCE... 2 1.6 SUPPORTING COMPONENTS... 3 1.7
More informationSTRUCTURAL CALCULATIONS
STRUCTURAL CALCULATIONS FOR BALUSTRADES USING BALCONY 1 SYSTEM HANDRAIL WITHOUT INTERNAL REINFORCING BAR. POSTS ARE 48.3mm DIAMETER AT 1.9m MAXIMUM CENTRES BY BALCONY SYSTEMS LIMITED Balcony 1 System,
More informationSTRUCTURAL CALCULATIONS
STRUCTURAL CALCULATIONS FOR BALUSTRADES USING BALCONY 1 SYSTEM HANDRAIL WITH INTERNAL 58 x 4mm STEEL REINFORCING BAR AND WITH 48.3mm DIAMETER X 5mm STEEL STANDARDS BY BALCONY SYSTEMS LIMITED Balcony 1
More informationBIM 2016 and the NEC. Simon Rawlinson, 20 April 2015
BIM 2016 and the NEC Simon Rawlinson, 20 April 2015 Presentation overview Commercial requirements of BIM BIM and NEC Working Together Government requirements for a collaborative digital model Supporting
More information10 steps to GS1 barcode implementation. User Manual
10 steps to GS1 barcode implementation User Manual Issue 3, August 2016 Table of Contents Introduction... 3 1 Get a GS1 company prefix... 4 2 Assign numbers... 4 3 Select a barcode printing process...
More informationDryflex CS. TPEs with optimised compression set
Dryflex CS TPEs with optimised compression set CONTENTS INTRODUCTION KEY PROPERTIES GRADE TABLE PROCESSING - EXTRUSION PROCESSING - INJECTION MOULDING PROCESSING CONTACT US INTRODUCTION Dryflex CS is a
More information22/11/2016 Emad Elbeltagi 1
BIM For FM 22/11/2016 Emad Elbeltagi 1 Problems with Current Practice How can BIM Help FM Benefits of MIB FM Integration BIM for FM Agenda Challenges of BIM for FM BIM for FM Guidlines Standards and Data
More informationBUILDING INFORMATION MODELLING BOUYGUES UK THE USE OF BIM TO IMPROVE PROJECT PERFORMANCE
BUILDING INFORMATION MODELLING BOUYGUES UK THE USE OF BIM TO IMPROVE PROJECT PERFORMANCE Presented by Chloe Obi 25 th January 2017 Presentation Structure 1. BIM Level 2 Requirements 2. Benefits for Industry
More informationProduct Regulations Detail Sheet 1
Designated by Government to issue European Technical Approvals Electronic Copy Visqueen Building Products Zedcor Business Park Bridge Street Witney Oxfordshire OX8 6LJ Tel: 01993 776346 Fax: 01993 776233
More informationWaterproofing Systems. Cementitious.
Construction Joint 2 coats Triton TT55 + TTME OR 2 coats @ 0.75 kg/m² per coat Construction Joint 2 coats Triton TT55 OR 1 coat @ 1 kg/m² Screed Reinforced Concrete Waterproofing Systems Cementitious n
More informationThe MOJ Story. BIM 2 AIM and the Digital Lifecycle Cost Toolkit. Andrew Green Director of Faithful+Gould 16 th November 2016, London
The MOJ Story BIM 2 AIM and the Digital Lifecycle Cost Toolkit Andrew Green Director of Faithful+Gould 16 th November 2016, London AIM of BIM Level 2 and beyond Efficiency agenda - key drivers: On 3 rd
More informationCLT Structural Design Sylvain Gagnon, Eng. February 8, 2011 Vancouver
www.fpinnovations.ca CLT Structural Design Sylvain Gagnon, Eng. February 8, 2011 Vancouver Structural Design Handbook 10/02/2011 2 Critical Characteristics for CLT used as floor/roof Short-term and long-term
More informationBIM Event. Martin Huggins Senior R&D Consultant University of Wolverhampton. Black Country Constructing Excellence Club
Black Country Constructing Excellence Club BIM Event Martin Huggins Senior R&D Consultant University of Wolverhampton Why Needed? 30% of construction is rework 60% of labour effort is wasted 10% loss due
More informationBuilding information modeling (BIM) The holistic view by Siemens. Unrestricted Siemens Switzerland Ltd 2016
Building information modeling (BIM) The holistic view by Siemens siemens.com/bim Construction projects are faced with numerous challenges Unbudgeted costs Unreliable schedule Insufficient quality Environmental
More informationSafety in a Second Guardrail Testing
BMT Fleet Technology Limited 21017.DB01 (Rev. DRAFT01) Safety in a Second Guardrail Testing Reference: 7830.FR (Issue 02) Date: 19 March 2012 BMT Fleet Technology Limited accepts no liability for any errors
More informationSTRUCTURAL CALCULATIONS
STRUCTURAL CALCULATIONS FOR BALUSTRADES USING BALCONY 2 SYSTEM HANDRAIL WITHOUT INTERNAL REINFORCING BAR AND WITH 60 x 24mm STEEL POSTS BY BALCONY SYSTEMS LIMITED Balcony 2 System, posts in Royal Chrome
More informationHOLDING CARPETS AND STANDS
Adhesive product needs in this sector is really wide. We have an adhesive solution for each application you need: fixing holding carpets, fixed or removal forex, signs - even lighted and standing high
More informationProduce Industry IT Standards Association (PIITSA) Revision PALLET CARD SPECIFICATION
Produce Industry IT Standards Association (PIITSA) Revision 1.0 2004 PALLET CARD SPECIFICATION 1 CONTENTS 1.0 DESCRIPTION...2 2.0 LAYOUT...3 3.0 FIELDS...4 4.0 PAPER PROPERTIES...6 5.0 FONT REQUIREMENTS
More informationDrill Pipe Combined Torsion-Tension To Yield Pipe Tubes
Drill Pipe Combined Torsion-Tension To Yield Pipe Tubes The charts that follow indicate the minimum torsional yield strength of the pipe body tube under tension. Locate the appropriate figure for the pipe
More informationAssociation of American Railroads Mechanical Division MANUAL OF STANDARDS AND RECOMMENDED PRACTICES
Association of American Railroads MANUAL OF STANDARDS AND RECOMMENDED PRACTICES EQUIPMENT IDENTIFICATION AND WARRANTY ADMINISTRATION Specification M-xxx-xxx Adopted: (date) DRAFT #18 Compiled by the ISM-RIF-WWG
More informationData Requirements for the Construction and Management of Buildings
Data Requirements for the Construction and Management of Buildings A Guide for Clients Oct 2017 Contents Purpose of this Document 2 Information Management and Information Exchange 3 - Information Exchanges
More informationCelsius 420 EN10210:S420
Celsius 420 EN10210:S420 Monday, 06 July 2015 Dave Chapman BEng CEng MIStructE Regional Technical Manager Structural Advisory Service Tata Steel Europe Tata Steel Slide 2 1 2 3 4 Technical information
More informationBIM MODELLING GUIDELINES REVIT
BIM MODELLING GUIDELINES REVIT Contents 1. Type IFC types 2. Levels 3. Continuous structures by level 4. Structure or Object placement 5. Wall connections Corners 6. Wall connections T-shaped walls 7.
More informationBIM guide for members of the Institution of Mechanical Engineers
BIM guide for members of the Institution of Mechanical Engineers Background Autodesk has prepared this guide for members of the Institution of Mechanical Engineers to: Explain what Building Information
More informationIQ On Metal Labels User Guide and FAQ
IQ On Metal Labels User Guide and FAQ Omni-ID office locations: US UK China India Germany PAG001866-05 - Omni-ID User Guide - IQ labels - 05132017 CONTENTS INTRODUCTION... 3 MEMORY VERSUS READ RANGE...
More informationSR 1710 inj / SD 7820 Epoxy system for infusion and injection processes
Page 1 / 5 SR 1710 inj / SD 7820 Epoxy system for infusion and injection processes Description Two components epoxy system Specially formulated with a low viscosity for RTM processes as injection, injection
More informationInformation Delivery Manual Work within HESMOS A descriptive approach to defining Information Delivery Manuals
Information Delivery Manual Work within HESMOS A descriptive approach to defining Information Delivery Manuals Liebich, T.; Stuhlmacher, K.; Guruz, R. AEC3 Deutschland GmbH, TU Dresden page 2/10 1 OVERVIEW
More informationABOUT PRODUCT DESCRIPTION COMPLIANT USE OF MATERIAL
P R O D UC T IN T R O D UC T IO N W W W. F V. C O M. A U ABOUT PRODUCT DESCRIPTION Vitrabond Aluminium Composite Panel (ACP), is a CodeMark certified, highly versatile facade panel, offering excellent
More informationRELEASED 19/Jun/ :22:52 GMT
La Crosse, Wisconsin Page 1 of 7 SUPPLIER BRANDED LABELING REQUIREMENTS 1.0 SCOPE 1.1 Purpose - This Standard defines packaging label requirements for supplier branded parts which use Trane item numbers.
More informationNational BIM Standard United States : The Development, Application and Vision
National BIM Standard United States : The Development, Application and Vision John Messner, Ph.D. Charles & Elinor Matts Professor of Architectural Engineering Director, Computer Integrated Construction
More informationUNIVERSITY OF BOLTON WESTERN INTERNATIONAL CENTRE FZE. BEng (HONS) CIVIL ENGINEERING SEMESTER ONE EXAMINATION 2015/2016
OCD59 UNIVERSITY OF BOLTON WESTERN INTERNATIONAL CENTRE FZE BEng (HONS) CIVIL ENGINEERING SEMESTER ONE EXAMINATION 2015/2016 ADVANCED STRUCTURAL ANALYSIS AND DESIGN MODULE NO: CIE6001 Date: Tuesday 12
More informationAutodesk and the UK BIM Level 2 Mandate
Autodesk and the UK BIM Level 2 Mandate BIM Level 2 Mandate The UK Cabinet Office is in the midst of a multi-year effort to reform the way in which the UK government procures construction helping to ensure
More informationSelfCheck System R-Series. Site Planning Guide
SelfCheck System R-Series Site Planning Guide Copyright 2006 2007, 3M. All rights reserved. SelfCheck System R-Series Site Planning Guide 78 8129 2082 1 Rev. C 3M, Tattle-Tape, and SelfCheck are trademarks
More informationCepi ContainerBoard (CCB) European Federation of Corrugated Board Manufacturers (FEFCO) GUIDELINES. Reel Identification and Finishing
Cepi ContainerBoard (CCB) European Federation of Corrugated Board Manufacturers (FEFCO) GUIDELINES Reel Identification and Finishing December 2017 Index 1 Introduction 2 Labelling of reels 2.1 Reel identification
More informationModule Title: Advanced Structural Design
CORK INSTITUTE OF TECHNOLOGY INSTITIÚID TEICNEOLAÍOCHTA CHORCAÍ Semester 1 Examinations 2008/09 Module Title: Advanced Structural Design Module Code: CIVL 8001 School: Building & Civil Engineering Programme
More informationB/555 Roadmap (June 2013 Update)
B/555 Roadmap (June 2013 Update) Design, Construction & Operational Data & Process Management for the Built Environment Maturity Model: A) In Preparation 1 Introduction The purpose of this updated Roadmap
More informationBIM & LEAN. ARCDOX Enabling & Supporting BIM Consultancy Production Support Training. Ralph Montague BArch MRIAI Architect, Managing Partner
1 BIM & LEAN BUILDING INFORMATION MODELLING ARCDOX Ralph Montague BArch MRIAI Architect, Managing Partner DIGITAL DESIGN CONSTRUCT OPERATE 2 About ArcDox About the Presenter Ralph Montague BArch MRIAI
More informationSTRUCTURAL CALCULATIONS
STRUCTURAL CALCULATIONS FOR JULIET BALCONY BALUSTRADES USING 21.5mm LAMINATED GLASS SYSTEM BY Balcony Systems Solutions Ltd Unit 6 Systems House Eastbourne Road Blindley Heath Lingfield Surrey RH7 6JP
More informationPackaging solutions MultiFresh
Packaging solutions MultiFresh MULTIVAC is the world s leading manufacturer of packaging machines. Each of these machines is individually designed to the customer's requirements in terms of pack design,
More informationRELEASED 19/Jun/ :22:52 GMT
La Crosse, Wisconsin Page 1 of 6 TRANE LABELING REQUIREMENTS 1.0 SCOPE 1.1 Purpose - This Standard defines packaging label requirements for Trane branded parts. 1.2 Applicability - This Standard applies
More informationCapstan drive units Mechanical handling rollers
PRODUCT INFORMATION PROVISIONAL TECHNICAL DATASHEET 8/6/2013 Introduction MONOTHANE is a range of single component, ready formulated polyesterbased polyurethane elastomers, available in the hardness range
More informationESR-1190 Reissued December 1, 2013 This report is subject to renewal December 1, 2014.
ICC-ES Evaluation Report ESR-90 Reissued December, 0 This report is subject to renewal December, 04. www.icc-es.org (800) 4-6587 (56) 699-054 A Subsidiary of the International Code Council DIVISION: 06
More informationBIM objects: what manufacturers and specialist contactors need to know. Ben Councell
BIM objects: what manufacturers and specialist contactors need to know Ben Councell AGENDA Introductions What is happening in the industry BIM: what is it? BIM objects: what are they? BIM in action Industry
More informationComparative Study on Post - Tensioned and Reinforced Concrete flat Slab Systems for a Multistory Building
Comparative Study on Post - Tensioned and Reinforced Concrete flat Slab Systems for a Multistory Building Thayapraba M Civil Department, NIT Trichy, (India) ABSTRACT Designers have a huge number of choices
More informationAsta Powerproject NEW FEATURES IN VERSION elecosoft.com. Asta Powerproject: The power behind successful projects
Asta Powerproject NEW FEATURES IN VERSION 14.0.01 elecosoft.com Assess and identify risks within projects with Risk Analysis Asta Powerproject now includes Risk Analysis, which was previously available
More informationEXPERIMENTAL INVESTIGATION ON BEHAVIOR OF SHEAR WALL ASSEMBLED WITH INTERLOCKING CONCRETE BLOCK
International Journal of Civil Engineering and Technology (IJCIET) Volume 8, Issue 3, March 2017, pp. 111 117 Article ID: IJCIET_08_03_011 Available online at http://www.iaeme.com/ijciet/issues.asp?jtype=ijciet&vtype=8&itype=3
More informationA Possible Future for Building Codes
M. A. Schnabel (ed.), Back to the Future: The Next 50 Years, (51 st International Conference of the Architectural Science Association (ANZAScA)), 2017, Architectural Science Association (ANZAScA), pp.
More informationA PRODUCT FROM KANTAFLEX (INDIA) PVT LIMITED
ELASTOMERIC BRIDGE BEARING TO LATEST IRC: 83-015 (PART - II) Kanta System of Elastomeric bridge bearing is made out of Poly chloroprene rubber having low crystallization rates and adequate shelf life,
More informationIntroduction to buildingsmart. Richard Petrie, buildingsmart International
Introduction to buildingsmart Richard Petrie, buildingsmart International buildingsmart today Values Open Neutral International Non Profit Goals Create openbim standards Host open BIM forums Certify software
More information2010 Bentley Systems Incorporated. FM Handover (COBie2) Aquarium
FM Handover (COBie2) Aquarium Intermediate Status March 17, 2010 Topics of Discussion About Bentley software for infrastructure design, construction and operations and global business BIM Collaboration
More informationCustom-Designed Clamps. Machined Versions. Online Configurator for Custom-Designed Clamps A56.
Custom-Designed Clamps Machined Versions Custom-designed clamping systems for pipes, tubes, hoses, cables and other components according to customer`s specifications or based on developments, made of thermoplastics,
More informationCHAPTER 11: PRESTRESSED CONCRETE
CHAPTER 11: PRESTRESSED CONCRETE 11.1 GENERAL (1) This chapter gives general guidelines required for the design of prestressed concrete structures or members with CFRM tendons or CFRM tendons in conjunction
More informationSPRAY-APPLIED HYBRID POLYUREA OR PURE POLYUREA-BASED WATERPROOFING SYSTEM FOR TRAFFICKED ROOFS AND BRIDGES AND VIADUCT DECKS
Purtop System Deck SPRAY-APPLIED HYBRID POLYUREA OR PURE POLYUREA-BASED WATERPROOFING SYSTEM FOR TRAFFICKED ROOFS AND BRIDGES AND VIADUCT DECKS PRODUCTS USED FOR THE SYSTEM: Purtop 400 M - Purtop 1000
More informationCHAPTER 10: GENERAL STRUCTURAL DETAILS
CHAPTER 10: GENERAL STRUCTURAL DETAILS 10.1 GENERAL It shall be in accordance with JSCE Standard Specification (Design), 9.1, "steel" shall be taken to signify "steel or CFRM". 10.2 CONCRETE COVER (1)
More informationSECTION MECHANICALLY ASSISTED MOBILE STORAGE SHELVING PART 1 - GENERAL 1.1 RELATED DOCUMENTS
SECTION 10560 MECHANICALLY ASSISTED MOBILE STORAGE SHELVING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and
More informationConcrete Cracking. ε ctr = f ctr / E c = 0.6 / 4400 = x 10-3
Concrete Cracking Concrete is known as a sensitive material for cracking. The code defines concrete modulus of elasticity (E c ) and concrete cracking-limit tensile stress (f ctr ) as: E c = 4400 (f cu
More informationCSG Engineering ensures the success by leading the implementation
BIM LegoCad-P2000 AUTOMATION OF ALL WORK PROCESSES Estimation & Proposals Engineering - Design & Drafting Production Mgmt & Planning Cost Control Design to Production Automation CSG Engineering ensures
More informationEngineered Honeycomb Solutions and Services. Honeycomb Panels
Engineered Honeycomb Solutions and Services Honeycomb Panels Plascore Honeycomb Panels Light, Strong, Tough, Cost-Effective Plascore Honeycomb Panels are a high-strength, lightweight material that provide
More informationUNIVERSITY OF BOLTON SCHOOL OF ENGINEERING. BEng (Hons) CIVIL ENGINEERING
TW7 UNIVERSITY OF BOLTON SCHOOL OF ENGINEERING BEng (Hons) CIVIL ENGINEERING SEMESTER 2 EXAMINATION 2015/2016 ADVANCED STRUCTURAL ANALYSIS & DESIGN MODULE NO. CIE6001 Date: Thursday 19 th May 2016 Time:
More informationISO/IEC INTERNATIONAL STANDARD. Information technology Unique identifiers Part 4: Individual items
INTERNATIONAL STANDARD ISO/IEC 15459-4 Second edition 2008-07-15 Information technology Unique identifiers Part 4: Individual items Technologies de l'information Identificateurs uniques Partie 4: Articles
More informationSPECIFICATION OF NEOPRENE RUBBER SEALS
SPECIFICATION OF NEOPRENE RUBBER SEALS 1.0 SCOPE This specification establishes the requirements for the manufacture, inspection, testing, packing, guarantee & supply of Neoprene Rubber Seals for Fuelling
More informationIDENTIFY WITH US. Tomorrow s Technology from Today s RFID Leader. Integrated RFID Application Solutions
IDENTIFY WITH US The Kennedy Group has been a high-quality, high-service low-cost provider focused on meeting the label needs of some of the most demanding CPG, automotive and industrial companies since
More informationSoltis. Proof W96. Waterproof and Translucent
Soltis Proof W96 Waterproof and Translucent Soltis Proof W96 External use Pergolas, canopies, shades and fixed shading systems Waterproof and Translucent effective and durable protection against weather
More informationSection Gabions Tender No. [ ] Page The following detail drawings are appended hereto and form part of this section.
Tender No. [ ] Page 1 1.0 GENERAL 1.1 DETAILED DRAWINGS.1 The following detail drawings are appended hereto and form part of this section. Number Title 02374.01 Gabion Basket Assembly Details 02374.02
More informationSTRUCTURAL CALCULATIONS
STRUCTURAL CALCULATIONS FOR BALUSTRADES USING BALCONY 2 SYSTEM HANDRAIL WITH INTERNAL REINFORCING BAR BY BALCONY SYSTEMS LIMITED Balcony 2 System, posts in Royal Chrome page 1 of 11 Balcony 2 system section
More informationSPECIFICATION FOR PRECAST/ COMPOSITE CONCRETE FLOORS/ ROOF DECKS SECTION E60
SPECIFICATION FOR SECTION E60 A 2007-09-26 S.W. Revision Date Issue Authorised By Approved for Issue SW Date 24.09.07 clarkebond Page 1 of 6 To be read with Preliminaries/ General Conditions. GENERAL 10
More informationDescription. Label Mass. Metric (mm) Tag Format Width Length Thickness Large Medium Small
Brady On metal RFID Integrated Label Description Brady On metal RFID Integrated Labels incorporate extended temperature range chip technology with durable label materials to withstand challenging environments
More information