Contact person: Maria Sieczka, tel , Offers competition.

Transcription

1 REQUEST FOR OFFER N. 2 / PO Smart Development Sub-measure concerning the assignment to a third party of a contract for the realization of a part of the project merit work to public universities, state research institutes, or other scientific units - organizations that carry out research and deal with the dissemination of science Business name Participation Mode BORA POLAND Sp. z o.o., Aristide Merloniego 3, Radomsko, Polonia Contact person: Maria Sieczka, tel , maria.sieczka@bora-poland.com Offers competition. Tender codes , , Date of announcement Date of submission of tenders Submission of tenders Objective of the order Description ore 12:00 (decides the date and time of arrival at the Customer's premises) Offers submitted after this deadline will not be taken into consideration. 1. In electronic version at the address: maria.sieczka@bora-poland.com 2. In paper version at the Customer's premises: BORA POLAND Sp. z o.o., Aristide Merloniego 3, Radomsko, Poland 1) Definition of the most suitable sensors to install on the innovative sensorized press. Definition of the operating logic of the sensors in relation to the correct operation of the innovative sensorized press. Definition of the most suitable positioning for the sensors according to the number of stations of the innovative sensorized press. 2) Definition of an innovative method for dimensional control of printed products. 3) Definition of the experimental plans to evaluate the performance of the innovative sensorized press and of the innovative method for dimensional control. 4) Analysis of experimentation data carried out on the innovative sensorized press. Simulation and modeling of the process through Finite Element Analysis. Definition of a mathematical model for the calculation and prediction of mold degradation. 5) Analysis of experimentation data carried out on the innovative sensorized press. Simulation and modeling of the process through Finite Element Analysis. Definition of a mathematical model for the calculation and prediction of mold degradation. The R & D services commissioned as a result of this procedure will be implemented as part of Phase 1 of the project with the title "Research and development work on the process of forming of thick sheet metal with the use of innovative press with innovative tools, aimed at prolonging the useful life of the molds which will be presented for co-financing on the sub-measure "Industrial research and development work carried out by the companies" of the Smart Development Operational Program, managed by the NCBiR agency, and will be divided into 3 parts: Part 1. Study and definition of sensors and operating logics 1

2 Study of the sensors, in terms of force / pressure and temperature sensors, to be installed and interfaced with the innovative sensorized press. Study and definition of the functioning logics of the sensors to be installed on the innovative sensorized press. Study and definition of sensor positioning: Study and definition of sensor positioning according to the number of stations (variable) of the innovative sensorized press; Study and definition of the positioning of the force / pressure and temperature sensors inside and / or outside the molds. Expected results: Descriptive technical report of the chosen sensors, of the functioning logics of the sensors in relation to the innovative press, of the positioning of the sensors in the innovative press. Part 2. Study and definition of an innovative method for dimensional control of printed products. Study of repeatability and accuracy of contact measurement technologies, such as mechanical probe mounted on CMM. Study of the repeatability and accuracy of non-contact measurement technologies, based on the use of laser scanners and structured light. Definition of an innovative method, based on the combined use of different measurement technologies (contact and non-contact), able to decrease the measurement time, with the same accuracy and repeatability of the measurement. Laboratory tests aimed at defining the innovative measurement method. Expected results: Descriptive technical report of the innovative method for dimensional control of printed products studied and defined. Part 3. Definition of experimental plans Identification of the experimental plans to be carried out for: Evaluate the influence of the parameters of the molding process on wear and, therefore, on the duration of the molds; Evaluate the performance of the innovative method for dimensional control of printed products, in relation to the time taken for measurement and measurement accuracy. The aforementioned experimental plans must be in a minimum number of two. The first for the innovative press while the second for the innovative method. The first experimental plan will obviously have to be performed on the innovative sensorized press with force / pressure and temperature sensors. The product to be printed will be a mechanical component of the Automotive sector. The first experimental plan must be defined with a view to considering the wear of the mold as an output variable. The second experimental plan will obviously have to be carried out through the use of different measurement technologies, on test cases in the Automotive sector and in the Household appliance sector. The second experimental plan will have to be defined considering the geometry of the product to be measured as an independent variable and, consequently, as a 2

3 factor to evaluate the influence. The experimental plans should provide for the application of ANOVA techniques for the assessment of the influence of individual factors. The experimental plans will have to be defined with the aim of guaranteeing a rigorously scientific approach to the experimentation and will therefore allow to calculate the mean and variance of the data, to verify the normality of the same and allow to hypothesize descriptive equations of the variation of the variable output with respect to input variables. Expected results: Definition of the experimental plan for the study of mold wear. Definition of the experimental plan for the evaluation of the performance of the innovative measurement method. Part 4. Analysis of the data of the experimentation carried out on the press and definition of a mathematical model for the wear of the molds. The Consultant will have to support BORA POLAND in the realization of the mold wear tests. The aforementioned tests, carried out according to the experimental plan defined in the previous Part 3, must be carried out using the innovative sensorized press with the aim of studying the influence of force / pressure and temperature on the wear of the molds. The Consultant must perform an analysis of the data acquired through the tests aimed at: - quantitatively evaluate the influence of force / pressure on mold wear; - quantitatively evaluate the influence of temperature on mold wear. Therefore, the Consultant must define the mathematical relations between the variables of influence of wear (force / pressure and temperature) and the wear itself. The Consultant must also select a finite element calculation code to reproduce, through the code, the experimental process conditions. The Consultant must also calibrate the calculation made to the finite elements in relation to the experimental reality observed, in terms of the forces and temperatures of the processing. Finally, the Consultant will have to study and implement a method for calculating tool wear using the Finite Element Analysis code. Expected results Technical report describing the influence of the force / pressure and temperature parameters on mold wear. Mathematical model descriptive of the phenomenon of mold wear. Numerical simulations describing the process. Part 5. Analysis of experimentation data carried out on the innovative method for dimensional control of printed products. The consultant will have to analyze the data of the experimentation carried out on the innovative method by comparing the performance of the different measurement technologies in relation to the accuracy and repeatability of each of them. Specifically, starting from the analysis of the acquired data: - through the use of the mechanical probe mounted in the CMM; - through laser scanner; 3

4 - through structured light, the Consultant will have to verify if the method defined in the previous Point 2 turns out to be actually faster than the traditional methods. It should be noted that the measurement carried out using the innovative method must guarantee the same accuracy as the measurement carried out using the traditional method (mechanical tracer mounted in the CMM). If the innovative method defined in the previous Point 2 does not meet the specific requirements, the Consultant must make changes to the aforementioned method and perform the experimental tests necessary to verify the achievement of the required time and accuracy requirements. The Consultant will also have to study and implement rules for the use of the innovative method according to the geometric characteristics of the product (s) measured. The aforementioned rules must allow BORA POLAND, depending on the max drawing depth of the product, the presence of flanges or other geometric characteristics, to be able to apply the innovative method with the necessary corrections / precautions. Term realization Participation conditions / mandatory criteria Expected results. Technical report describing the performance analysis activity of the innovative method for dimensional control of printed products. Descriptive technical report of the changes applied to the method and related experimental tests to support the modifications. Release of the definitive method for the dimensional control of printed products in the prototype version. Not later than 24 months and according to the following timetable: - Part 1: max 7 months after order date, - Part 2: max 7 months after order date, - Part 3: max 5 months after approval of the results of Part 1 and Part 2, - Part 4: max 12 months after approval of Part 3, - Part 5: max 12 months after approval of Part 3. 1) The contract can not be awarded to Bidders / Consultants who have patrimonial or personal ties with the Client. Patrimonial or personal ties are the reciprocal links between the Customer or between the persons authorized to take on commitments in the name and on behalf of the Client or between the persons performing on behalf of the Principal the activities related to the preparation of the Contractor selection procedure. / Bidder / Consultant towards the Contractor / Bidder / Consultant and, in particular: a) participation in companies, as partners or in a partnership; b) own at least 10% of the shares or shares; c) perform a function of member of the supervisory body or of an administrator, or of a public prosecutor; d) being married, or in a relationship of kinship or affinity in a direct line, in relationship of kinship of second degree or affinity of second degree in collateral line or of adoption or protection. The criterion will be verified on the basis of the Offeror's declaration (attachment No. 1 to the offer). 2) The Bidder must have sufficient human resources to carry out the contract, ie: - at least 1 person, who has managed / managed at least three R & D projects over 4

5 the last 20 years, including at least one project in the field of conventional and / or unconventional metal sheet metalworking in the automotive sector and at least one related project tool wear in the automotive and / or aerospace and / or mechanical field; - at least 1 person, who has managed / manages at least one R & D project in the last 5 years in the field of mechanics and has at least n. 15 publications in the field of conventional and / or unconventional sheet metal working in the last 15 years; - at least 1 person with experience in the field of finite element simulations of metal plate deformation processes, confirmed by at least 3 publications in the sectors mentioned above. The criterion will be verified on the basis of attachment n. 2 to the offer completed by the Offeror. 3) The Bidder must have been a proponent, and not a consultant, of at least three R & D projects in the field of mechanics in the last 10 years. The criterion will be verified on the basis of attachment n. 3 to the offer completed by the Offeror. Evaluation criteria offered: 4) Timetable of the performance of the contract does not exceed the deadlines set out in the "Completion deadline" above. 1) Total net price - 50 points (50%) Calculation method: Pi = (Cmin / Ci) x 50 Pi - Scoring of the i-th offer Cmin - minimum total net price of all valid offers submitted Ci - price of the i-th offer. 2) Payment conditions - 25 points (25%) Calculation method: Pi = (% min /% i) x 25 Pi - Scoring of the i-th offer % min - minimum percentage advance on the net price of all valid offers submitted % i - percentage of the i-th offer advance. 3) Guarantee - 25 Points (25%) Calculation method: Pi = (Mi / Mmax) x 25 Mi - months of guarantee of the i-th offer Mmax - maximum number of months of guarantee between all valid offers submitted. Other clauses The Offer must contain calculation parameters for each criterion. If it will not be possible to evaluate, the score 0 will be assigned. 1) Each Bidder can present only one offer. 2) Offer can be made in Polish, English or Italian. 3) Offer must be quoted in Polish PLN currency or in EUR, including all taxes, duties, customs duties and other payments due under current regulations. 4) Procurement report will be carried out in finite stages with a work delivery protocol signature. 5

6 Content of the offer: Partial offers and variants Additional contracts Contract modification Cancellation of procedure Languages 5) The bids received during this procedure may be handed over to a public body for the necessary verification resulting from the Regulation of the Sub-measure ) With the winner the conditional contract will be stipulated. The condition will be the entry into force of the co-financing contract and the written approval by NCBR agency that the contract can be awarded to the winner (if it concerns). Bidder data Date and expiration of the offer Detailed description of the services offered Parameters for calculation of each mandatory criterion and evaluation criterion Total price net, VAT, and gross (including VAT) Terms of payment Deadline and proposed timeline Contact person data Signature Compiled annexes n. 1, 2, 3. Customer does not admit to submitting partial offers or variants of offers in this contract. Customer reserves the right to grant the winning bidder an additional contract. The scope of this additional procurement will be in accordance with the scope of the basic contract. The value of the additional procurement can not exceed 50% of the basic procurement value. Customer reserves the right to change the scope of the conditional contract with a winning bidder, in the form of a written attachment, only in the following cases: a) changes justified in the context and manner of carrying out the contract, b) objective reasons not dependent on the Client or the Offeror, c) force majeure, d) changes to the regulations in force on the date the contract is signed, e) to receive from the NCBiR agency a decision to change the scope of the project tasks, terms of implementation or other mandatory decisions for the Client. Customer reserves the right to cancel the procedure at each stage without giving the reason. This offer request has been published in Polish, English and Italian languages. In case of doubts concerning the content of the request, the version in Polish will be decisive. 6

7 FORM OF THE OFFER In response to the REQUEST FOR OFFER N. 2 / PO Smart Development - Sub-measure published by: BORA POLAND Sp. Z oo, Aristide Merloniego 3, Radomsko, Poland, concerning the contract to a third party a part of the project's merit work at public universities, state research institutes, or other scientific units - organizations conducting research and dealing with the dissemination of science Name Address VAT number/tax code Type of body Name and surname Phone Date of the offer Offer expiry Language of the offer Offer currency Total net price (PLN/EUR) VAT (PLN/EUR) Total gross price including VAT (PLN/EUR) Terms of payment Bidder data Data of the contact person Offer parameters Expiry and time schedule of implementation proposed in months: - of all contracts - Part 1: max 7 months after order date, - Part 2: max 7 months after order date, - Part 3: max 5 months after approval of the results of Part 1 and Part 2, - Part 4: max 12 months after approval of Part 3, - - Part 5: max 12 months after 7

8 approval of Part 3. Detailed description of the services offered We declare that we have taken note of the Request for Offer and that our offer includes all the elements defined in the Request. Data of a person authorized to present the offer Date and signature 8

9 Annex n. 1 to the Offer Declaration on lack of patrimonial or personal ties Agency / stamp:.. VAT number... In response to the Request for Offer for: (fill in according to the Request for Offer) I declare (declare) that I do not have (we) the patrimonial or personal ties with the Client: BORA POLAND Sp. Z o.o., Aristide Merloniego 3, Radomsko, Poland. Patrimonial or personal ties are the reciprocal links between the Customer or between the persons authorized to take on commitments in the name and on behalf of the Client or between the persons performing on behalf of the Principal the activities related to the preparation of the Contractor selection procedure. / Bidder / Consultant towards the Contractor / Bidder / Consultant and, in particular: a) participation in companies, as partners or in a partnership; b) own at least 10% of the shares or shares; c) perform a function of member of the supervisory body or of an administrator, or of a public prosecutor; d) being married, or in a relationship of kinship or affinity in a direct line, in relationship of kinship of second degree or affinity of second degree in collateral line or of adoption or protection... Place, date Signature of the representative authorized by the Offeror 9

10 Annex n. 2 to the Offer Information on the Human Resources of the Bidder 1) at least 1 person, who has managed / managed at least three R & D projects over the last 20 years, including at least one project in the field of conventional and / or unconventional metal sheet work in the automotive sector and at least one project in the of wear in automotive and / or aerospace and / or mechanical tools. Name and surname: University degree: Title of the first Managed R & D Project: Period of realization of the first R & D Project: Title of the second Managed R & D Project: Period of realization of the second R & D Project: Title of the third Managed R & D Project: Period of realization of the third R & D Project: Title of the project managed in the context of conventional and / or unconventional machining of automotive metal sheets: Title of the project managed in the field of tool wear in the automotive and / or aerospace and / or mechanical field: 2) at least 1 person, who has managed / managed at least one R & D project in the last 5 years in the field of mechanics and which has at least n. 15 publications in the field of conventional and / or unconventional sheet metal working in the last 15 years; Name and surname: University degree: Title of the R & D project managed: Publication 01: Publication 02: Publication 03: Publication 04: Publication 05: Publication 06: Publication 07: Publication 08: Publication 09: Publication 10: Publication 11: Publication 12: Publication 13: Publication 14: Publication 15: 3) at least 1 person with experience in the field of finite element simulations of metal plate deformation processes, confirmed by at least 3 publications in the sectors mentioned above. Name and surname: University degree: 10

11 Publication 01: Publication 02: Publication 03:.. Place, date Signature of the representative authorized by the Offeror 11

12 Annex n. 3 to the Offer Information on the R & D projects of the Bidder I declare that in the last 10 years,... (name of the Offeror)... I have carried out the following R & D projects, as proponent and not a consultant, in the field of mechanics: 1. Title and period of realization of the R & D project: Title and period of realization of the R & D project: Title and period of realization of the R & D project:..... Place, date Signature of the representative authorized by the Offeror 12