TGTS,TGTT,and SGT-type series
|
|
- Nora Harvey
- 6 years ago
- Views:
Transcription
1 No.346-E Three Corner Type Grooving Tools TGTS,TGTT,nd SGT-type series Newly dded cermet grde NS730
2 TGTSTGTTSGT Three Corner Type Grooving Tools Exceptionl Insert Stbility TGTS,TGTT, TGTT, nd SGT-type series SGT type Rnge of groove widths:34. mm Mx. groove depth:.0. mm TGTS type Rnge of groove widths:34. mm Mx. groove depth:..0 mm TGTT type Rnge of groove widths:34. mm Mx. groove depth:.0.0 mm GB-type Inserts Applicble for mchining of vrious grooves ln ddition to the existing nd KS0F, new NS730 grde hs been dded to the series. Avilble in brod rnge of groove widths. Cutting edge geometries Groove shpe Rnge of groove widths GB-type Norml groove (Squre) 3 mm 4. mm GB-R type Full-rdius groove (Round) 1.0 mm0.r 4.0 mmr STANDARD CUTTING CONDITIONS Work mteril Hrdness Insert grde Cutting speed (m/min) Feed (mm/rev) Crbon steels nd lloy steels (JIS S4C, SCM41, etc.) 10-40HB NS Stinless steels (JIS SUS304, etc.) < 40 HB Gry cst irons (FC0, etc.) Tensile strength <30Nmm Non ferrous metls (Aluminum lloy, etc.) KS0F
3 For mchining steels Four new technologies vstly improve surfce ccurcy,wer resistnce, plstic-deformtion resistnce nd impct resistnce! Microstructure of NS730 For mchining of generl steels, stinless steels, nd cst irons A combintion of fine-grined cemented crbide nd Flsh-Cot more improves wer resistnce! Microstructure of (Ti, A) N-bsed PVD coting Flsh-Cot which excels in wer resistnce nd dhesion. Highly tough micro-grin cemented crbide which excels in chipping resistnce. For mchining of nonferrous metls High hrdness nd high strength due to the homogeneous fine-grined structure contribute to the excellent resistnce to wer, frcture, nd chip welding! Microstructure of KS0F Superfine Cermet NS730 Smoothened insert surfce The smoothened insert surfce prevents chip welding nd llows excellent surfce finish. Improved surfce-finish ccurcy Homogeneously fine-grined structure Since the cermet structure is homogeneously fine-grined from inside to the surfce, the wer is minimized nd proceeds evenly. Improved wer resistnce Reinforced skeleton structure Strengthens binding forces between the hrd prticles. Improved plstic-deformtion resistnce Tough fine-grined hrd prticles The skeleton structure consisting of finegrined hrd prticles contributes to improved toughness. Improved impct resistnce KS0F Micro-grin cemented crbide in which wer resistnce nd impct resistnce re blnced with sophisticted technology. CUTTING PERFORMANCE Mchining of crbon steel (JIS S4C) Mchining of stinless steel (JIS SUS 304) NS730 Competitor s coted grde Work mteril:crbon steel (JIS S4C) 4HB Toolholder:TGTSRM-3 Insert:GBR43300 Groove width:w=3mm Groove depth:d=mm Cutting speed:vc=00m/min Feed:f =0.1mm/rev Coolnt:Wet Note:One-pss grooving Competitor s grde Work mteril:stinless steel (JIS SUS304) 7-331HB Toolholder:TGTSRM-3 Insert:GBR43300 Groove width:w=3mm Groove depth:d=mm Cutting speed:vc =100m/min Feed:f =0.1mm/rev Coolnt:Wet NS730 is superior to competitor s coted grde in wer resistnce. Usble for more mchining! NS730 Competitor s coted grde Frctured Competitor s grde Frctured (pss) Number of workpieces mchined
4 f Tungloy TOOLHOLDERS TGTS type Externl grooving TGTS R/L L L1 b f 6 h1 h Externl grooving TGTT R/L 6 L L1 b h1 h f Rnge of groove width (mm) Mx. groove depth (mm) TGTT type Toolholder Ct. No. Stock Dimensions (mm) Applicble inserts R L h b L1 L h1 f Clmp TGTSR/L00K16 GBR/L TGTSR/LM16 GBR/L CP900 GBR/L43114 TGTSR/L00K GBR/L4300R GBR/L TGTSR/L00K GBR/L4307R100R GBR/L43040 TGTSR/L00K GBR/L431R00R GBR/L43114 TGTSR/LM GBR/L4300R GBR/L TGTSR/LM GBR/L4307R100R GBR/L43040 TGTSR/LM GBR/L431R00R CP910 Clmping screw Wrench MCS0 -. P-. Rnge of groove width (mm) Mx. groove depth (mm) Internl grooving SGT type SGT R/L Toolholder Ct. No. Stock Dimensions (mm) Applicble inserts R L h b L1 L h1 f Clmp GBL/R43114 TGTTR/L00K GBL/R4300R GBL/R TGTTR/L00K GBL/R4307R100R GBL/R43040 TGTTR/L00K GBL/R431R00R GBL/R43114 TGTTR/LM GBL/R4300R GBL/R TGTTR/LM GBL/R4307R100R GBL/R43040 TGTTR/LM GBL/R431R00R TGTTR/L00K16 GBL/R TGTTR/LM16 GBL/R CP900 CP L L1 d Clmping screw Wrench MCS0 -. P-. h1 Rnge of groove width (mm) Min. grooving di. (mm) 3 40 Mx. groove depth (mm). Toolholder Ct. No. Stock R L Applicble inserts GBL/R3 GBL/R43 GBL/R43R Dimensions (mm) f L L h Clmping screw CSTB-4S CSTB-S Wrench T-1F T-0F
5 Tungloy INSERTS GBR/L3 type d W Dimensions (mm) Stocked grdes Dimensions (mm) Mx. groove depth Cermet Coted Uncoted Insert Ct. No. R NS730 KS0F GBR/L3033 GBR/L300 GBR/L307 GBR/L309 GBR/L3100 GBR/L31 GBR/L314 GBR/L310 GBR/L300 GBR/L30 R L R L R L d T GBR/L43 type d W Dimensions (mm) Stocked grdes Dimensions (mm) Mx. groove depth Cermet Coted Uncoted Insert Ct. No. R NS730 KS0F GBR/L431 GBR/L4314 GBR/L4310 GBR/L4317 GBR/L4318 GBR/L4300 GBR/L4330 GBR/L430 GBR/L436 GBR/L4380 GBR/L43300 GBR/L43330 GBR/L4330 GBR/L43400 GBR/L43430 GBR/L4340 R L R L R L d T GBR/L43-R type (Full rdius) Dimensions (mm) Stocked grdes Dimensions (mm) W Mx. Cermet Coted Uncoted Insert Ct. No. groove R NS730 KS0F d T 0.0 depth R L R L R L GBR/L4300R GBR/L4307R d 3. 1 GBR/L43100R GBR/L431R 3 1. GBR/L4310R 4 GBR/L4300R When using TGTT nd SGT type tools, right hnd (R) toolholders use left hnd (L) inserts nd left hnd (L) toolholders use right hnd (R) inserts.
6 Hed Office Solid Squre, 80 Horikw-cho, Siwi-ku, Kwski City, Jpn Phone: Fcsimile: Interntionl Sles & Mrketing Deprtment -7, Sugsw-cho, Tsurumi-ku, Yokohm City, Jpn Phone: Fcsimile: Tungloy Americ, Inc. 16A Michel Drive, Wood Dle, IL.60191, U.S.A. Phone: Fcsimile: Tungloy Europe GmbH Elisbeth-Selbert-Strsse 3, Lngenfeld, Germny Phone: Fcsimile: Tungloy Frnce S..r.l. 6Avenue des Andes, 919 Courtboeuf Cedex, Frnce Phone: Fcsimile: Tungloy Itli S.p.A. Vi E. Andolfto 10, 016 Milno, Itly Phone: Fcsimile: Tungloy Cutting Tool (Shnghi) Co.,Ltd. United Plz 10, 1468 Nn Jing Rod West, Shnghi 00040, Chin Phone: Fcsimile: Thi Tungloy Cutting Tool Co.,Ltd. 11th Floor, Sorchi Bldg. 3/7, Soi Sukhumvit 63, Klongtonnue, Wttn Bngkok 10110, Thilnd Phone: Fcsimile: Tungloy Singpore(Pte.),Ltd. 0 Kllng Avenue #06-03 Noel Corporte Building Singpore 3390 Phone: Fcsimile: Tungloy de Mexico S.A. CLos Arellno 113, Vist Alegre, Agusclientes, AGS, Mexico 090 Phone: , Fcsimile: Distributed by: ISO 9001 certified QCOOJ006 18/10/1996 Tungloy Co.Ltd ISO certified EC97J113 Production Division, Tungloy Co.Ltd (BUN)
o Micro Tools for Small Bores METRIC
o Micro Tools for Smll Bores METRIC o Micro Tools for Smll Bores The Microscope line offers new nd improved solutions for micro oring, grooving, chmfering nd threding in ores s smll s 1.0 mm. The Microscope
More informationT/EAW13 & T/EPW13 types
No.358-E Screw-on type TAC Mills T/EAW13 & T/EPW13 types Milling made easy The exact simulation analysis in the design has low cutting forces, and light weight! Region of great influence on the rigidity
More informationHigh Speed Shear Mill
s High Speed Sher Mill igh speed her ill Positive xil rke provides Excellent burr-free cutting on the edges of the mchined fce Excellent fltness on the mchined fce ess mchine horsepower required ecommended
More informationSUMMARY TECHNICAL INSTRUCTIONS. Technical Information. Geometries and feed rates. Cutting data. Carbide grades for grooving and parting off
SUMMARY TECHNICAL INSTRUCTIONS Technical Information Grooving / Side turning Face grooving Profiling Threading Parting off Page 2-5 6 7 8-9 10-11 Geometries and feed rates Cutting data Inserts type 217
More informationSolid boring bars with minimum bore as small as ø0.6mm
TurnLine www.tungaloyamerica.com Tungaloy Report No. 402-US TINYMINI-TURN Solid boring bars with minimum bore as small as ø0.6mm ACCELERATED MACHINING TurnLine Sharp and precise cutting edge offers highly
More informationAH725. Super Flash Coating provides High Productivity machining. PVD coated grade for steels and stainless steels. Keeping the Customer First
Keeping the Cusmer First Tungaloy Report No. 370-E PVD coated grade for steels and stainless steels Super Flash Coating provides High Productivity machining Triple Force provides long ol life and stable
More informationARX. Small Diameter Radius End Mill. yfeatures. Highly Rigid Body
Smll Dimeter dis End ill AX Applictions Tool Dimeter nd dis yfetres oghing nd Semi-finishing (Shnk type) ( Screw-in type) Holder : & &5 Insert :,,.5 Holder : &1 &5 Insert :, Highly igid Body The ctter
More informationDovetail insert clamping guarantees high productivity
MillLine Tungaloy Report No. 503-US DOTRIPLE-MILL Dovetail insert clamping guarantees high productivity CCELERTED MCHINING MillLine DoForce-Tri is a new series of tools with double-sided triangular insert
More informationTOOL NEWS. PVD Coated Cemented Carbide Grade for Carbon Steel MS6015 B210A-F. New Product
PVD Coated Cemented Carbide Grade for Carbon Steel TOOL NEWS B210A-F New Product PVD Coated Cemented Carbide Grade for Carbon Steel Engineered specifically for precision turning of low carbon steels and
More information83% 110 pcs. 60 pcs. for Steel P Wheel Bearing for Automotive Industry YG3020. life. Low Alloy Steel CNMG UM,YG3020 (CNMG 432-UM,YG3020)
INSERT HIGHLIGHT for Steel P Wheel Bearing for Automotive Industry CNMG 120408-UM,YG3020 (CNMG 432-UM,YG3020) 83% 110 pcs Low Alloy Steel AISI 4140 JIS SCM440 DIN 42CrMo4 Vc Fn 350 m/min (1150 ft/min)
More informationMFH Micro. Micro Dia. Cutter for High Feed Machining. Low Resistance and Durable Against Chatter for Highly Efficient Machining
Micro Diameter High Feed Mills Micro Dia. Cutter for High Feed Machining Low Resistance and Durable Against Chatter for Highly Efficient Machining Shortens Rough Machining Times Replaces Solid End Mills
More informationDevelopment of New Grade SUMIBORON BN7000 for Cast Iron and Ferrous Powder Metal Machining
SPECIAL ISSUE Development of New SUMIBORON for Cast Iron and Ferrous Powder Metal Machining Yusuke Matsuda*, Katsumi OKaMura, shinya uesaka and tomohiro FuKaYa SUMIBORON P (polycrystalline cubic boron
More informationTOOLS NEWS B055E Update. Multi-functional Indexable Cutter APX3000/4000. A new generation of high performance cutters.
TOOLS NEWS 2014.01 Update B055E Multi-functional Indexable Cutter APX3000/4000 A new generation of high performance cutters. Multi-functional milling Cutter APX3000/4000 Multi functional The APX is highly
More informationTable of Contents. Turning. Guidelines
Discount-s.com 71-892-3700 Guidelines d Promotion pricing is not available through online ordering d Orders must be drop shipped to the end-user d Promotion code must be used when placing order d Table
More informationMaximize productivity in Superalloy machining!
Keeping the Customer First Tungaloy Report No. 404-US PVD coated grade for Superalloy turning Extended version TUNGALOY Maximize productivity in Superalloy machining! Features - The ideal grade for Superalloy
More informationOctober /10. Improved, New Grades and Chip Breakers for Machining Heat Resistant Super Alloys
October 2018 1/10 Improved, New Grades and Chip Breakers for Machining Heat Resistant uper Alloys 2/10 KEY POINT TaeguTec s new grades and chip breakers for heat resistant super alloys (HRA). TT3010 and
More informationSEPDS/SEPDM TOOLS NEWS
TOOLS NEWS HSS milling shank drills SE High Precision Drill Series 216.1 Update SEPDS/SEPDM B212G DS n P E S ditio Ad New HSS drill with newly developed proprietary D-STH surface treatment. Excellent for
More informationSummary of Insert Grades. Turning Small Tools Grooving Cut-off Drilling Milling. Insert Grades MEGACOAT. Super Micro-Grain. Coated Carbide.
1~18 Summary of Turning Small Tools Grooving Cut-off Drilling Milling PVD Coated PVD Coated (Super Micro-grain / Micro-grain ) PVD Coated (Milling, Drilling) CVD Coated Ceramic CBN PCD (Polycrystalline
More informationExcellent stability und. ARNO SHORT-Cut -SIS. w w w. a r n o. d e. Introducing SHORT-Cut -SIS for internal groove turning. The new SHORT-Cut holder
Introducing SHORT-Cut -SIS for internal groove turning New w w w. a r n o. d e The new SHORT-Cut holder with optimum insert clamping. Easy handling and efficient in production. ARNO SHORT-Cut -SIS Excellent
More informationAH725. Super Flash Coating provides High Productivity machining. PVD coated grade for steels and stainless steels. Keeping the Customer First
Keeping the Cusmer First Tungaloy Report No. 012-USA JULY 2009 PVD coated grade for steels and stainless steels Super Flash provides High Productivity machining Triple Force provides long ol life and stable
More informationHigh precision grinding and superior clamping precision with auto-centering system TPD B TPD 200 B
Technical Information for High precision grinding and superior clamping precision with auto-centering system High precision clamping system - High precision grinding and superior clamping precision with
More informationSwiss Line. New Products
Swiss Line New Products Inch 2017 SwissLine CONTENTS: Page: Polygon Swiss Line Product Identification Grooving Grooving and Profiling (full radius) Parting Off Back Turning Front Turning Threading Partial
More informationSumi Dual Mill TSX-Series
TOOLING NEWS E-145 High-Efficient and High recision Tangential Shoulder Milling Sumi Dual Mill TSX-Series M K N S H TSX Type l l General Features High-efficient and high precision tangential shoulder milling
More informationBC8020. A new CBN tool grade to revolutionize the machining of hardened steels. B181G
B181G Genel Pupose Coted Gde fo Hdened Steel A new tool gde to evolutionize the mchining of hdened steels. y Even unde high lod conditions, high we esistnce cn be obtined to incese mchining pefomnce. ycutting
More informationSTRUCTURAL TRANSFORMATIONS IN ELECTRON BEAM WELDED JOINTS OF CONTINUOUS SAW BLADES. Dumitru OCHIAN, Ion-Dragoş UŢU, Ion MITELEA
STRUCTURAL TRANSFORMATIONS IN ELECTRON BEAM WELDED JOINTS OF CONTINUOUS SAW BLADES Dumitru OCHIAN, Ion-Drgoş UŢU, Ion MITELEA Politehnic University of Timisor, Pt Victoriei, No. 1, Timisor, Romni, dnochin@yhoo.com,
More information4JER 4JER. For Superalloy Machining. High Efficiency and Stable Machining for Heat Resistant Alloys such as Inconel.
Solid End Mill For Superalloy Machining High Efficiency and Stable Machining for Heat Resistant Alloys such as Inconel Resistant to Breakage and Capable of Stable and Trochoidal Machining Long Tool Life
More informationBROACHING on CNC machines
BOACHING on CNC machines BOACHING TOOLS TYPE SB105, SB110 and SH117 For direct mounting in lathes and mills as well as mounting in a live broaching attachment from the companies: - BENZ - EWS - Schwarzer
More informationNow Available, New YNMG 2.53 Inserts. Insert Shapes YNMG Corner Radii.016",.031" Grades Cermet: PV3010 CT3000 Carbide: TT8115 (CVD) TT5080 (PVD)
Insert Sapes YNMG 2.53 Corner Radii.016",.031" Grades Cermet: PV3010 CT3000 Caride: TT8115 (CVD) TT5080 (PVD) Now Availale, New YNMG 2.53 Inserts Ingersoll is pleased to announce te expansion of te Gold-Rino
More informationInsert Grades A1~A21 A2~A5. Summary of Insert Grades A6~A21. Insert Grades. Turning Small Tools Grooving / Cut-Off / Threading Drilling Milling
Summary of Turning Small Tools Grooving / Cut-Off / Threading Drilling Milling 1~21 2~5 2~3 3 4 5 5 Cermet PVD Coated Cermet CVD Coated (Turning) PVD Coated (Turning) PVD / CVD Coated (Milling / Drilling)
More informationKonda Industry Co., Ltd
Reputation ctuality Innovation High efficiency Konda Industry Co., Ltd Konda Industry Co., Ltd is a comprehensive enterprise established in 1997, specialized in machinery and drills etc. ll these products
More informationNew PVD-Coated Carbide Grade AC1030U for Precision Turning
INDUSTRIAL MATERIALS New PVD-Coated Carbide Grade for Precision Turning Takato YAMANISHI*, Hiroki TAKESHITA, Shinya IMAMURA, Kazuhiro HIROSE and Haruyo FUKUI ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
More informationNew Milling Cutter For Various Machining
Keeping the Customer First ungaloy eport No.018-US C Mill Series : Shoulder Milling Cutter NEW UNGLOY PO / EPO type New Milling Cutter For Various Machining UNGLOY UNGLOY UNGLOY C MILLS High productivity
More informationAll-rounder drill Capable for a wide range of work materials
PRODUCT INFORMATION WD-2D WD-4D WD Carbide Drill Worldwide Drill All-rounder drill Capable for a wide range of work materials Dc>4 Wave type Dc 4 Straight type www.osgeurope.com General Purpose Carbide
More informationFLOMIN SOLID MINIATURE TOOLS. Solid threading and grooving tools for 0.6 mm minimum bore!
FLOMIN Solid threading and grooving tools or 0.6 mm minimum bore! w w w.to o l l o.c o m FLOMIN ACCELER ATED MACHINING FLOMIN Excellent cutting edge oers high precision machining or a wide range o internal
More informationHIGH PERFORMANCE PRODUCT
HIGH PERFORMANCE PRODUCT SYNCHRO TAPS (HSS-PM) High Speed, High Precision for CNC Machining Synchro Tap has an optimized short thread length and high thread reliefs. We guarantee you shorter cycle time,
More informationINNOVATIVE TAPS HYPER-Z SERIES CELEBRATE THE POLE POSITION TOP QUALITY LEADER. Optimized cutting geometry
INNOVATIVE TAPS HYPER-Z SERIES CELEBRATE THE POLE POSITION TOP QUALITY LEADER Optimized cutting geometry TAPS HYPER-Z SERIES Innovative taps developed with s comprehensive experience Quality based on s
More informationPY2N20 Material Properties and Phase Diagrams
PY2N20 Mteril Properties nd Phse Digrms ecture 6 P. Stmenov, PhD School of Physics, TCD PY2N20-6 Microstructures in Eutectic Systems: I C o < 2 wt% Sn Result: - t extreme ends - polycrystl of grins i.e.,
More informationTURNING. Stellram Cutting Tool Products
TURNING Stellram Cutting Tool Products ATIstellram.com ATImetals.com Turning Machining Solutions for Mission Critical Metallics Increase productivity and reduce tooling costs in today s most challenging
More informationDIJET CARBIDE TOOLS. Carbide Grades. Carbide Grades
DIJET CARBIDE TOOLS Dijet Grades for Cutting Tools Sintered Super Hardened Polycrystalline CBN (for high hardened materials) Polycrystalline Diamond PCD (for aluminum, non-ferrous metal) Turning Grades
More informationCBN / Diamond Coated Carbide
CBN / Diamond Coated Carbide CBN CBN Style Applications Typical parts Turning hardened steel Single or Multi tipped Multi tipped Rough & Finish turning gray iron Hardened steel (Continuous - Interruption)
More information/ 2019 full product line
www.tungaloyamerica.com 2018 / 2019 full product line Coated CVD Coated PVD Ceramic Cermet CBN (T-CBN) PCD (T-DIA) Uncoated Cemented Carbide TurnLine Insert External Toolholder Internal Toolholder Miniature
More informationCoated-Carbide Grades AC8015P, AC8025P, and AC8035P for Steel Turning
INDUSTRIAL MATERIALS Coated-Carbide Grades AC8015P, AC8025P, and for Steel Turning Satoshi ONO*, Yasuki KIDO, Susumu OKUNO, Hideaki KANAOKA, Shinya IMAMURA, and Kazuhiro HIROSE ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
More informationдля размещения заказа - VG-Cut Deep Grooving, Threading and Parting Off METRIC
Deep Grooving, Threading and Parting Off METIC Deep Grooving, Threading and Parting Off Complete ange of Solutions for External Turning Applications VAGUS Ltd., the leading supplier of premium thread turning
More informationCN1500 / CN2500. Solution for Steel Turning CN1500 CN2500
/ Solution for Steel Turning The leading cermet series for next generation with high wear & chipping resistance in high speed machining High Resistance to Chipping and Thermal Crack Equalized substrate
More informationYour Parts Our Competence in High-Performance Machining
SPK Cutting Tool Division on cast iron and hardened steel Your Parts Our Competence in High-Performance Machining Your Parts Our Competence Engineering the king of disciplines Engineering combines cutting
More informationCoated SUMIBORON BNC2010/BNC2020 for Hardened Steel Machining Realizing Long and Stable Tool Life
INDUSTRIAL MATERIALS Coated SUMIBORON / for Hardened Steel Machining Realizing Long and Stable Tool Life Yusuke MATSUDA*, Hironari MOROGUCHI, Nozomi TSUKIHARA, Katsumi OKAMURA, Makoto SETOYAMA and Tomohiro
More informationRose Gold Color Coated Carbide for Highly Stable Cast Iron Machining
New CVD Coated Carbides for Cast Iron New CVD Coated Carbides for Cast Iron Rose Gold Color Coated Carbide for Highly Stable Cast Iron Machining Improved coating adhesion prevents chipping and provides
More informationJongen Werkzeugtechnik. Working depth. Drilling by JONGEN. 3 x D. BP 04 to 12
Jongen Werkzeugtechnik Working depth 3 x D Drilling by JONGEN BP 04 to 12 THE TOOL New at Jongen: universally applicable high-performance drill for use on lathes and milling centers. It offers the highest
More informationTungaloy Report No. 415-E. Shoulder milling cutter NEW. Workhorse for rough machining operations!
ungaloy Report No. 415E Shoulder milling cutter NEW Workhorse for rough machining operations! pplication range of roughing series High ø5 ~ ø63 and work rigidity ø25 ~ ø5 ø2 ~ ø25 Low Light machining Heavy
More informationNEW. Revolutionizing the World of Product Manufacturing. Aqua REVO Drills Stub/Regular LIST 9860 LIST 9862
Revolutionizing the World of Product Manufacturing Aqua REVO Drills Stub/Regular IST 986 IST 9862 NEW NEW Revolutionizing the World of Product Manufacturing IST 986 / IST 9862 REVO Drills Stub/Regular
More informationYU-VP17 YE- EI18 COATED EXCHANGEABLE CARBIDE INSERTS WITH CARBIDE & STEEL HOLDERS FOR VARIOUS MATERIALS
YU-VP17 YE- EI18 europe COATED EXCHANGEABLE CARBIDE INSERTS WITH CARBIDE & STEEL HOLDERS FOR VARIOUS For General Purpose, Pre-Hardened Steels, High-Hardened Steels, Stainless Steels and Graphite High Precision
More informationRose Gold Color Coated Carbide for Highly Stable Cast Iron Machining
New CVD Coated Carbides for Cast Iron New CVD Coated Carbides for Cast Iron Rose Gold Color Coated Carbide for Highly Stable Cast Iron Machining Improved coating adhesion prevents chipping and provides
More informationExpansion of the HELIDO 690 LINE with Tools Carrying 10 mm Edged Inserts
MILLING JANUARY Page 1 / 8 Expansion of the HELIDO 690 LINE with Tools Carrying 10 mm Edged Inserts JANUARY Page 2 / 8 Highlights Milling cutters carrying a double-sided triangular insert with six 10 mm
More informationA BEHAVIOR OF ELASTIC AND PLASTIC STRAIN FOR (α+γ) DUAL PHASE STAINLESS STEELS IN ROTATING BENDING TEST
Copyright JCDS - Interntionl Centre for Diffrction Dt 24, Advnces in X-ry Anlysis, Volume 47. 39 ISSN 197-2 A BEHAVIOR OF ELASTIC AND LASTIC STRAIN FOR (+) DUAL HASE STAINLESS STEELS IN ROTATING BENDING
More information1001 Business Center Drive Mount Prospect, IL Toll Free: (800) Phone: (847) Fax: (847)
1001 Business Center Drive Mount Prospect, IL 60056-2181 Toll Free: (800) 950-5202 Phone: (847) 635-0044 Fax: (847) 635-7866 http://www.sumicarbide.com Sumitomo continues to develop innovative tooling
More informationTN620/PV720. CERMET/MEGACOAT NANO CERMET for Steel Machining
Insert Grades / Hybrid Cermet / CERMET for Steel Machining MEGACOAT NANO CERMET for Steel Machining CERMET/MEGACOAT NANO CERMET for Steel Machining New, innovative cermet brings stability into generating
More informationCROMAX 180X THE ECONOMIC CHOICE FOR CONVENTIONAL HYDRAULIC CYLINDER APPLICATIONS
CROMAX 180X THE ECONOMIC CHOICE FOR CONVENTIONAL HYDRAULIC CYLINDER APPLICATIONS YOUR PARTNER IN HYDRAULICS Cromax products from Ovako are the preferred choice for many hydraulic-cylinder manufacturers
More informationSmall but Powerful Positive Insert with Dovetail Design
1/9 Small but Powerful Positive Insert with ovetail esign 2/9 Small but Powerful Positive Insert with ovetail esign TaeguTec is proud to introduce a brand new product line to its popular CHASEMI family.
More informationREGIN 3. Cold work tool steel
Cold work tool steel This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not therefore be construed as a warranty
More informationPSTW. 6-corner shoulder cutter series. Volume 2
6-corner shoulder cutter series Volume KEY FEATURES: PHOENIX Positive rake angle geometry 6,55mm Economical cutting edges per side (total of 6) Flat cutting edge for excellent surface finish Chip pocket
More informationProduct Expansion! ARNO FTA-milling system. Class leading technology - New. Face milling tool for cost reduction!
NEW www.arno.de FTA effective face milling! Face milling cutter for extreme conditions and high performance. High-Tech coating and accurate insert location Product Expansion! for excellent results. Class
More informationHighly Efficient Cutter with a 66 Cutting Edge Angle
Highly Efficient Cutter with a Cutting Edge Angle Highly Efficient Cutter with a Cutting Edge Angle Economical Inserts with 10 Cutting Edges. Reduces Chattering with Low Cutting Force Design Reduces Cutting
More informationSeries TOOLS NEWS. Heptagonal double sided insert. Economical 14 cutting edge inserts. General Purpose Multi Corner Insert Type Face Milling Cutter
TOOLS NEWS 2017.1 Update General Purpose Multi Corner Insert Type Face Milling Cutter AHX Series B195G Series Expansion Heptagonal double sided insert. Economical 14 cutting edge inserts. General Purpose
More informationJongen Werkzeugtechnik GmbH
STEP MILLING Type B22 Jongen Werkzeugtechnik GmbH Siemensring 11 D-47877 Willich Germany Phone: 0049 2154 9285 2900 Fax: 0049 2154 9285 9 2900 www.jongen.de Email: export@jongen.de THE TOOL Especially
More informationHigh strength fine grained structural steel, thermo-mechanically rolled, for high temperature application
P420M HT High strength fine grined structurl steel, thermo-mechniclly rolled, for high temperture ppliction Specifiction DH-E52-D, edition April 2016 1 P420M HT is high strength thermomechniclly rolled
More informationSimulation of Die Casting Process in an Industrial Helical Gearbox Flange Die
Simultion of Die Csting Process in n Industril Helicl Gerbox Flnge Die Mehdi Modbberifr, Behrouz Rd, Bhmn Mirzkhni Abstrct Flnges re widely used for connecting vlves, pipes nd other industril devices such
More informationNGK SPARK PLUG EUROPE GMBH NGK SPARK PLUGS(U.K.), LTD
2007-2008 http://www.ngkntk.de/ http://www.ntkcuttingtools.co.uk/ http://www.ngkntk.co.jp/ 2007 2008 CUTTING TOOLS NGK SPARK PLUG EUROPE GMBH NGK SPARK PLUGS(U.K.), LTD Best Performance for Al alloy (High
More informationEvaluation of WC-9Co-4Cr laser surface alloyed coatings on stainless steel
Evlution of WC-9Co-4Cr lser surfce lloyed cotings on stinless steel B A Odele 1, P A Olumi 1, S L Pityn 2 nd A P I Popool 1 1 Deprtment of Chemicl nd Metllurgicl Engineering, Tshwne University of Technology,
More informationMilling tools made by JONGEN! C10 FP 124. Face Milling
Milling tools made by JONGEN! Face Milling C10 FP 124 THE TOOL Especially efficient face milling cutter for the roughing and finishing machining Axial depth of cut max. 5 mm, with 8 effective cutting edges
More informationPR1225. The MEGACOAT Series. Effective for Stainless Steel. Ideal for small part machining demanding high quality and stable cutting
MEGACOAT The MEGACOAT Series New PVD Coating for Small Tools Effective for Stainless Steel Ideal for small part machining demanding high quality and stable cutting The MEGACOAT Series High quality small
More informationMighty upgrading. Shocking showup. New generation. Turning products
Mighty upgrading Shocking showup New generation Turning products YB6315 CVD coating grade combining double oxygen gradient transition layer technique and crystal nucleus pre-planting technique, for turning
More informationNPA. ISCAR Introduces the Narrowest mm Indexable Slitting Cutter. New Product Announcement. Page 1 / 5
NPA ISCAR Introduces the Narrowest - 0.8 mm Indexable Slitting Cutter Page 1 / 5 Page 2 / 5 Highlights ISCAR is introducing the narrowest indexable slitting tool in the market: indexable SGST disk slitting
More informationSuccess Stories (Version ) WWW. YG1. KR
Success Stories (Version 201805) WWW. YG1. KR YG602 on Austenitic Stainless Steel Case study Milling M Stainless Steel JIS SUS304 DIN X 5 CrNi 18 9, AISI 304 Operation Face Milling (Φ200, 12z) Stainless
More informationA New Positive Multi Corners Milling Line
1/9 A New Positive ulti Corners illing Line 2/9 With the increasing popularity of small machining centers, TaeguTec is pleased to launch a new single-sided line of positive seven corners insert that generates
More informationTOOLS NEWS. The new high Al-(Al,Ti)N single layer coating significantly reduces edge fracturing. ISO Turning Inserts for Difficult to Cut Materials
TOO NEWS ISO Turning Inserts for Difficult to Cut Materials 0.5 Update BG Series Expansion The new high Al-(Al,Ti)N single layer coating significantly reduces edge fracturing. MP905 MT905 ISO Turning Inserts
More informationFerritic/martensitic cast steel. Stainless steel Austenitic
Machining Data for Threading ISO Material Condition Tensile Strength [N/mm ] Hardness HB Material < 0. %C Annealed 0 1 1 No. Non-alloy steel and cast steel, free cutting steel >= 0. %C Annealed 0 190
More informationSolid Carbide Taps.
Solid Carbide Taps www.vergnano.com VERGNANO CARBIDE TAPS The use of carbide tools has increased significantly in the last few years. Nowadays turning, drilling and milling operations are done, for the
More informationTOOL NEWS B055A Update. Multi-functional Indexable Cutter APX3000/4000. Holder Expansion. A new generation of high performance cutters.
TOOL NEWS 2015.11 Update Multi-functional Indexable Cutter APX3000/4000 B055A Holder Expansion A new generation of high performance cutters. Multi-functional Indexable Cutter APX3000/4000 Multi functional
More informationThe best of both worlds
The best of both worlds CoroMill 210 the ultimate roughing cutter for modern machining techniques Use CoroMill 210 for plunge milling to mill away large volumes of metal or for high feed milling of flat
More informationEdition 3, The latest revised edition of this brochure is the English version, which is always published on our web site
This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not therefore be construed as a warranty of specific properties
More informationCHAPTER 21. Cutting-Tool Materials and Cutting Fluids. Kalpakjian Schmid Manufacturing Engineering and Technology 2001 Prentice-Hall Page 21-1
CHAPTER 21 Cutting-Tool Materials and Cutting Fluids Manufacturing Engineering and Technology 2001 Prentice-Hall Page 21-1 Cutting Tool Material Hardnesses Figure 21.1 The hardness of various cutting-tool
More informationUltra-met. carbide metalworking technologies (800) (866)
CEMENTED CARBIDE GRAIN STRUCTURES January 2006 720 North Main Street P.O. Box 313 Urbana, OH 43078 800.543.9952 866.543.9952 937.653.7133 Fax: 937.653.4754 CEMENTED CARBIDE GRAIN STRUCTURES January 2006
More informationQMI STORMSAFE SCREEN - OPERABLE IMPACT SCREEN - NON-HVHZ INSTALLATION AND ANCHORAGE DETAILS
QMI STORMSFE SCREEN - OPERBLE IMPCT SCREEN - NON-HVHZ INSTLLTION ND NCHORGE DETILS GENERL NOTES: 1. THIS PRODUCT IS DESIGNED TO COMPLY WITH THE CURRENT EDITION THE FLORID BUILDING CODE (FBC) REQUIREMENTS
More informationPolycrystalline cubic boron nitride blanks and cut shapes for milling and turning tools. TOOLMAKER SOLUTIONS BZN Compacts Tool Blanks and Inserts
Polycrystalline cubic boron nitride blanks and cut shapes for milling and turning tools TOOLMAKER SOLUTIONS BZN Compacts Tool Blanks and Inserts BZN COMPACTS TOOL BLANKS AND INSERTS Hyperion manufactures
More informationAMADA MACHINE TOOLS AMERICA, INC. THE VISION OF PRECISION. Saw Blades
MD MCHINE TOOLS MERIC, INC. THE VISION OF PRECISION Saw lades mada Machine Tools merica Contents mada Machine Tools merica 1 With more than 70 years of industry experience, mada Machine Tools merica is
More informationCA65 15/25 & PR11 25 CA65. Solution for Stainless Steel Machining. Minimizes Notching. Prevents Burrs. Reduces Buil-up Edge.
CA65 15/25 & PR11 25 25 PR11 & 15/25 CA65 Solution for Machining Minimizes Notching. Prevents Burrs. Reduces Builup Edge. For FinishingMedium Chipbreaker! MQ TZE00048 New Coated CA65 15 / PR11 25 CA6515/CA6525
More informationSANDVIK HYPERION BZN COMPACTS TOOL BLANKS AND INSERTS
SANDVIK HYPERION BZN COMPACTS TOOL BLANKS AND INSERTS BZN COMPACTS TOOL BLANKS AND INSERTS Sandvik Hyperion manufactures a complete line of high quality polycrystalline CBN products for machining ferrous
More informationWear of PVD Coated and CVD+PVD Coated Inserts in Turning
Wear of PVD Coated and CVD+PVD Coated Inserts in Turning Paper No.: 65 Session No.: Author Name: Title: Affiliation: Address: Email: 56 (Dynamics and Vibrations in Experimental Mechanics) M.A. Zeb Assistant
More informationGY Mono Block. Grooving Revolution. One piece type ensure high rigidity and cost effective.
GY Mono Block Grooving Revolution One piece type ensure high rigidity and cost effective. INSERT a A WIDE SELECTION OF INSERTS Breaker system Grooving Selection of groove widths GUBreaker (For Gummy Steel)
More informationTOOLING NEWS E- 50 New Coated Carbide Grades for Stainless Steels AC610M / AC630M
TOOLING NEWS E- 5 New Coated Carbide Grades for Stainless Steels / Machining X5 CrNiMo17 12 2 (316) New Superb Grades for Stainless Steel! Ace Coating / General Features Overcoming the problems associated
More informationASM Shank Type (Short / Long)
No. 324.4 SM Shank Type (Short / Long) Q max High Efficient Jet ir Hole Roughing Semi-Finishing Finishing HRC 50 No. of Teeth 1 ~ 5 d1 D lb L Undercut type d1 D L lb Tolerance D: Maximum torque on screw:
More informationVG-Cut. Complete Range of Turning Solutions METRIC. Innovative Grooving & Turning Solutions
VG-Cut Complete ange of Turning Solutions METIC Innovative Grooving & Turning Solutions VG-Cut Complete ange of Turning Solutions Deep Grooving, Threading, Parting Off, Boring and Face Grooving Technical
More informationTooling the Steel Mill Industry
Tooling the Mill Industry RELIABILITY FOR THE STEEL MILL INDUSTRY TOOLING THE STEEL MILL INDUSTRY App for ios App for ANDROID NTKCUTTINGTOOLS.com youtube.com/ntkcuttingtools Insert Materials, Characteristics,
More informationBZN* Compacts Tool Blanks and Inserts. Machining of Ferrous Materials
BZN* Tool Blanks and Inserts Machining of Ferrous Materials BZN* Tool Blanks and Inserts Diamond Innovations manufactures a complete line of high quality polycrystalline CBN products for machining ferrous
More informationDevelopment of SUMIBORON BN7500 for Ferrous Powder Metal Finishing
INDUSTRIAL MATERIALS Development of SUMIBORON for Ferrous Powder Metal Finishing Yusuke MATSUDA*, Katsumi OKAMURA and Satoru KUKINO SUMIBORON tools are widely used in the cutting of hard-to-cut ferrous
More informationThe new force in machining.
Product handbook Milling _ SILVER, BLACK, STRONG The new force in machining. Yesterday, it was machining. Today, it s tigering. Cutting tool materials with the Tiger tec technology brand are setting the
More informationDevelopment of Cermet T1500A for Steel Turning
INDUSTRIAL MATERIALS Development of Cermet for Steel Turning Kazuhiro Hirose*, Keiichi Tsuda, Yoshio FuKuYasu, akira sakamoto, Hiroki YoneKura, Kenta nishi, Kazuo YamagaTa and Hideki moriguchi Sumitomo
More informationTOOLMAKER SOLUTIONS Custom-Made Inserts Blanks
Non-ISO carbide insert blanks for threading, parting, grooving, drilling, reaming and milling applications TOOLMAKER SOLUTIONS Custom-Made Inserts Blanks HYPERION CUSTOM-MADE INSERT BLANKS Hyperion manufacturers
More informationNEW. Ensures remarkable wear resistance when machining cast iron!! New CVD Coated Grade for Milling Cast Iron. Keeping the Customer First
Keeping the Customer First ungaloy Report No. 395-E New CVD Coated for Milling Cast Iron NEW UNGLOY Ensures remarkable wear resistance when machining cast iron!! Guarantees long and stable tool life by
More informationINSERT GRADES A1 - A20 A2 - A5 SUMMARY OF INSERT GRADES A6 - A20 INSERT GRADES TURNING SMALL TOOLS GROOVING CUT-OFF DRILLING MILLING
ISERT 1-20 SUMMRY OF ISERT 2-5 TURIG 2 SMLL TOOLS 3 GROOVIG 4 CUT-OFF 4 DRILLIG 5 MILLIG 5 ISERT CERMET CVD COTED CRBIDE (Turning) VD COTED CRBIDE (Turning) VD / CVD COTED CRBIDE (Milling, Drilling) CRBIDE
More information