AH725. Super Flash Coating provides High Productivity machining. PVD coated grade for steels and stainless steels. Keeping the Customer First

Transcription

1 Keeping the Cusmer First Tungaloy Report No. 370-E PVD coated grade for steels and stainless steels Super Flash Coating provides High Productivity machining

2 Triple Force provides long ol life and stable operation. Wellbalanced fracture resistance Excellent wear resistance Excellent Chip Control New grade for internal turning of steels features a super ugh substrate along with a (Ti,Al)N coated layer providing "Triple Force". 1st Force Excellent wear resistance Newly improved coating layer features great adhesion strength between coating and substrate Corner wear width VBc (mm) Competir A Conventional is more wear resistant than conventional and competir s coated grades. Work material S45C (248HB) Cutting speed Vc = 200 m/min Depth of cut ap = 1.0 mm Feed f = mm/rev Cutting fluid Water soluble type (Internal supply) Cutting time (min) Competir A Conventional 2nd Force Well-balanced fracture resistance Number of shocks % UP Competir B features extraordinary resistance fracturing in interrupted. Work material S45C Cutting speed Vc = 150 m/min Depth of cut ap = 1.0 mm Feed f = 0.25 mm/rev Cutting fluid Water soluble type (Internal supply) Standard conditions Grade Steels Cutting Speed v c (m/min) Stainless steels

3 Tungaloy & stainless steels in a wide variety of applications. 3rd Force Excellent Chip Control chipbreaker for Low force due high-rake angle Applicable in a wide range of conditions due a unique chipbreaker protrusion. Versatile chip breaker (1st choice) for chipbreaker Positive land creates low force and sharp edge. Excellent chip control due wide & positive chip flow Strong edge controls edge notching and chipping. Functional chip breaker provides low force with excellent edge. Well-balanced micro alloy substrate is effective for plastic deformation resistance and ughness Long ol life and cost effective combined with Stream Jet Bar The head design provides both rigidity and good chip evacuation which avoid chip entanglement that can cause fracturing and chipping. Application for steels and stainless steels 4 ap (mm) 2 The oil hole positioned close the edge achieves excellent cooling capability and chip control, and ensures outstanding ol life

4 80 Rhombic, 7 Positive, with Hole Application Appearance f - ap CCMT CCMT CCMT CCMT09T CCMT09T CCMT09T * CCMT CCMT CCMT CCMT CCMT CCMT09T * CCMT09T CCMT09T CCMT CCMT Rhombic, 11 Positive, with Hole CT CT CT CT CT * CT CT CT CT * CT CT Rhombic, 7 Positive, with Hole Application Appearance f - ap DCMT DCMT DCMT DCMT11T * DCMT11T DCMT11T DCMT11T DCMT DCMT DCMT11T * DCMT11T DCMT11T Note Cross section of chipbreaker is of * marked Cat.No. Scked in Japan

5 Tungaloy 90 Square, 7 Positive, with Hole * SCMT09T SCMT09T SCMT SCMT * SCMT09T SCMT09T SCMT SCMT ST ST ST * ST Application Appearance f - ap TCMT TCMT TCMT * TCMT TCMT TCMT16T TCMT16T TCMT16T Square, 11 Positive, with Hole 60 Triangular, 7 positive, with Hole TCMT TCMT TCMT * TCMT16T TCMT16T TCMT16T Note Cross section of chipbreaker is of * marked Cat.No. Scked in Japan 5

6 60 Triangular, 11 Positive, with Hole Application Appearance f - ap TT TT TT TT * TT TT TT TT TT TT TT TT16T TT16T TT TT TT TT TT TT TT TT * TT16T TT16T TT16T Rhombic, 5 Positive, with Hole * VBMT VBMT VBMT VBMT VBMT VBMT Rhombic, 7 Positive, with Hole VCMT * VCMT VCMT VCMT VCMT Note Cross section of chipbreaker is of * marked Cat.No. Scked in Japan

7 Tungaloy Practical examples 20% longer ol life and excellent surface finish Insert Toolholder CCMT A10K-SCLCR06-D120 Work material Cutting speed Feed Depth of cut SUS316 Vc = 120 m/min f = mm/rev ap = 0.4 mm Tool life criteria Surface roughness ø24 ø17 14 mm Machine component Results In operations with severe surface roughness, the ol life was increased by 20% compared with competir s PVD grade Number of workpieces machined ol life 120% UP 360 pcs. Competir A 300 pcs. 50% longer ol life with outstanding surface finish Insert Toolholder DCMT A10K-SDUCR07-D mm Work material SUJ2 Cutting speed Vc= 100 m/min Feed Depth of cut f = 0.1 mm/rev ap = 0.6 mm ø28 ø26 Tool life criteria number of workpieces and surface finish Machine component Results When competir s PVD grade was used, the workpiece surface appeared dull and was unstable. The productivity of was vastly improved from 200 pcs 300 pcs. In addition, its surface finish was superior those obtained with competir s ol. Number of workpieces machined Competir B ol life 150% UP 300 pcs. 200 pcs. 7

8 Tungaloy Corporation (Head office) Solid Square, 580 Horikawa-cho, Saiwai-ku Kawasaki City, Japan Phone Fax http// Tungaloy America, Inc. 1226A Michael Drive, Wood Dale, IL.60191, U.S.A. Phone Fax http// Tungaloy Canada 432 Elgin St. Unit 3, Brantford, Ontario N3S 7P7, Canada Phone Fax http// Tungaloy de Mexico S.A. C Los Arellano 113, Parque Industrial Siglo XXI Aguascalientes, AGS, Mexico Phone Fax http// Tungaloy do Brasil Comercio de Feramentas de Corte Ltda. Rua dos Sabias N Vinhedo, São Paulo, Brazil Phone Fax http// Tungaloy Germany GmbH Elisabeth-Selbert-Strasse 3 D Langenfeld, Germany Phone Fax http// Tungaloy France S.a.r.l. 6 Avenue des Andes F Courtaboeuf Cedex, France Phone Fax http// Tungaloy Italia S.p.A. Via E. Andolfa 10 I Milano, Italy Phone Fax http// Tungaloy Czech s.r.o Turanka 115 CZ Brno, Czech Republic Phone Fax http// Distributed by Tungaloy Ibérica S.L. Puigterrà de Baix 5-9 1r E Manresa (BCN), Spain Phone Fax http// Tungaloy Scandinavia AB St Lars Väg 42A SE Lund, Sweden Phone Fax http// LLC Tungaloy Rus Grazhdanskiy Prospectus, 29a Belgorod, , Russia Phone Fax http// Tungaloy Cutting Tool (Shanghai) Co.,Ltd. Rm No 401 No.88 Zhabei, Jiangchang No.3 Rd Shanghai , China Phone Fax http// Tungaloy Cutting Tool (Thailand) Co.,Ltd. 11th Floor, Sorachai Bldg. 23/7, Soi Sukhumvit 63 Klongnnue, Wattana, Bangkok 10110, Thailand Phone Fax http// Tungaloy Singapore (Pte.), Ltd. 50 Kallang Avenue #06-03 Noel Corporate Building Singapore Phone Fax http// India Branch 201, 2Fl. Krishna Apra Business square, Plot No. D4-5-6 Netaji Subhash Place, Pitampura, New Delhi , Delhi, India Phone Fax http// Tungaloy Korea Co., Ltd #1312, Byucksan Digital Valley 5-cha, Gasan-dong, Geumcheon-gu Seoul, Korea Phone Fax http// Tungaloy Malaysia Sdn Bhd 50 K-2, Kelana Mall, Jalan SS6/14, Kelana Jaya, Petaling Jaya, Selangor Darul Ehsan, Malaysia Phone Fax http// http// ISO 9001 certified ISO certified QC00J0056 EC97J1123 Tungaloy Corporation Tungaloy Group Japan site and Asian production site 18/10/ /11/1997 Produced from Recycled paper (TJ)