TRENDS 1.8A OVERVIEW GB

Size: px

Start display at page:

Download "TRENDS 1.8A OVERVIEW GB"

Darleen Greer
6 years ago
Views:

1 TRENDS 1.8A OVERVIEW GB

$\ 2$

2 LEATHERLINE LL Lemon Yellow Antigrav LL Pumpkin Orange Antigrav LL Cobalt Blue Antigrav LL Apple Green Antigrav SIBUGLAS SG GENESIS Grey AR SG SHATTERED Silver AR SG SHATTERED Champagne AR SG SHATTERED Rose AR SG SHATTERED Brown AR SG SHATTERED Grey AR SG CURVED Silver AR SG CURVED Gold AR SG CURVED Rose AR SG ALIGNED Silver AR SG ALIGNED Gold AR SG ALIGNED Rose AR SG GRID Silver AR SG GRID Gold AR SG GRID Rose AR WOODLINE 10 WL Carbonized Wood 11 WL Carbonized Wood Antigrav \ 2

DECOLINE 12 12 12 12 12 12 DM OXIDIZED Silver

DM OXIDIZED Nickel AR DM OXIDIZED Platin AR DM

13 DM SLIGHTLY USED Bronze AR 13 DM SLIGHTLY

USED Champagne AR 14 USED Silver AR 14 USED

$METAL Silver AR 16 DM REFINED METAL Titan AR \$

3 DECOLINE DM OXIDIZED Silver AR DM OXIDIZED Autumn AR DM OXIDIZED Copper AR DM OXIDIZED Nickel AR DM OXIDIZED Platin AR DM OXIDIZED Titan AR 13 DM SLIGHTLY USED Gold AR 13 DM SLIGHTLY USED Bronze AR 13 DM SLIGHTLY USED Copper AR 13 DM SLIGHTLY USED Titan AR 14 USED Champagne AR 14 USED Silver AR 14 USED Titan AR 15 USED Ivory AR 15 USED Sand AR 15 USED Bronze AR 15 USED Steel AR 16 DM REFINED METAL Silver AR 16 DM REFINED METAL Titan AR \ 3

LL Lemon Yellow Antigrav / 20425 LL Lemon Yellow Antigrav LL

PPglass fibres Cutting, punching PUleather Material thickness mm

bending PVA compressible 1000 mm Special formats Further

4 LL Lemon Yellow Antigrav / LL Lemon Yellow Antigrav LL Pumpkin Orange Antigrav / LL Cobalt Blue Antigrav / Photo: istock.com LL Apple Green Antigrav / LEATHERLINE LL ANTIGRAV PPglass fibres Cutting, punching PUleather Material thickness mm 3,8 3,93 Rolled packable Drilling Sawing Laser cutting Hot bending PVA compressible 1000 mm Special formats Further thicknesses Cuttings PVA pretreatment SIBU SILICON 1.4A On request Spatula A2 * Ground must be a SIBU metal foil (ref , self adhesive). \ 4

SG GENESIS Grey AR / 20185 / 20223 SG GENESIS Grey AR SIBUGLAS scratchresistant

Rolled packable Cutting, punching Drilling Sawing (supported by a panel) Laser

5 SG GENESIS Grey AR / / SG GENESIS Grey AR SIBUGLAS scratchresistant SG GENESIS Grey AR PMMA Back side material Paper Material thickness mm 2,3 2,43 Rolled packable Cutting, punching Drilling Sawing (supported by a panel) Laser cutting Hot bending PVA compressible 1000 mm Special formats Spatula A2 Maximum length mm 3000 Profile groups 3 / 5 Maximum width mm 1000 Further thicknesses Cuttings PVA pretreatment * Ground must be a SIBU metal foil (ref , self adhesive). \ 5

SG SHATTERED Silver AR / 20168 / 20206 SG SHATTERED Rose AR SG SHATTERED

SHATTERED Brown AR / 20173 / 20211 SIBUGLAS scratchresistant SG SHATTERED AR

Drilling Material thickness mm 2,6 2,73 Rolled packable Sawing Laser cutting

6 SG SHATTERED Silver AR / / SG SHATTERED Rose AR SG SHATTERED Champagne AR / / SG SHATTERED Rose AR / / SG SHATTERED Brown AR / / SIBUGLAS scratchresistant SG SHATTERED AR SG SHATTERED Grey AR / / PMMA Cutting, punching PUleather Drilling Material thickness mm 2,6 2,73 Rolled packable Sawing Laser cutting Hot bending PVA compressible 1000 mm Special formats Spatula A2 Maximum length mm 3000 Profile groups 3 / 5 Maximum width mm 1000 Further thicknesses Cuttings PVA pretreatment * Ground must be a SIBU metal foil (ref , self adhesive). \ 6

SG CURVED Silver AR / 20177 / 20215 SG CURVED Gold

20216 SG CURVED Silver AR SIBUGLAS scratchresistant

Drilling Material thickness mm 2,9 3,03 Rolled

compressible 1000 mm Special formats Spatula A2

width mm 1000 Further thicknesses Cuttings PVA

7 SG CURVED Silver AR / / SG CURVED Gold AR / / SG CURVED Rose AR / / SG CURVED Silver AR SIBUGLAS scratchresistant SG CURVED AR PMMA Cutting, punching PUleather Drilling Material thickness mm 2,9 3,03 Rolled packable Sawing Laser cutting Hot bending PVA compressible 1000 mm Special formats Spatula A2 Maximum length mm 3000 Profile groups 3 / 5 Maximum width mm 1000 Further thicknesses Cuttings PVA pretreatment * Ground must be a SIBU metal foil (ref , self adhesive). \ 7

SG ALIGNED Silver AR / 20180 / 20219 SG ALIGNED Gold AR / 20179 /

SIBUGLAS scratchresistant SG ALIGNED AR PMMA Cutting, punching

Sawing Laser cutting Hot bending PVA compressible 1000 mm Special

Maximum width mm 1000 Further thicknesses Cuttings PVA

8 SG ALIGNED Silver AR / / SG ALIGNED Gold AR / / SG ALIGNED Silver AR SG ALIGNED Rose AR / / SIBUGLAS scratchresistant SG ALIGNED AR PMMA Cutting, punching PUleather Drilling Material thickness mm 2,9 3,03 Rolled packable Sawing Laser cutting Hot bending PVA compressible 1000 mm Special formats Spatula A2 Maximum length mm 3000 Profile groups 3 / 5 Maximum width mm 1000 Further thicknesses Cuttings PVA pretreatment * Ground must be a SIBU metal foil (ref , self adhesive). \ 8

SG GRID Silver AR / 20183 / 20222 SG GRID Gold AR

20184 / 20220 SIBUGLAS scratchresistant SG GRID AR

thickness mm 2,9 3,03 Rolled packable Sawing Laser

Special formats Spatula A2 Maximum length mm 3000

thicknesses Cuttings PVA pretreatment * Ground

9 SG GRID Silver AR / / SG GRID Gold AR SG GRID Gold AR / / SG GRID Rose AR / / SIBUGLAS scratchresistant SG GRID AR PMMA Cutting, punching PUleather Drilling Material thickness mm 2,9 3,03 Rolled packable Sawing Laser cutting Hot bending PVA compressible 1000 mm Special formats Spatula A2 Maximum length mm 3000 Profile groups 3 / 5 Maximum width mm 1000 Further thicknesses Cuttings PVA pretreatment * Ground must be a SIBU metal foil (ref , self adhesive). \ 9

* WL Carbonized Wood / 20157 / 20224 WL Carbonized Wood WOODLINE WL Carbonized Wood HIPS Cutting, punching impregnated paper Material thickness mm 1,3 1,43 Rolled packable ** Drilling Sawing, milling

10 * WL Carbonized Wood / / WL Carbonized Wood WOODLINE WL Carbonized Wood HIPS Cutting, punching impregnated paper Material thickness mm 1,3 1,43 Rolled packable ** Drilling Sawing, milling Laser cutting Hot bending Thermoforming PVA compressible 150 mm Special formats Maximum length mm 3000 Maximum width mm 1220 Spatula A1 Further thicknesses Profile groups 1 / 2 / 3 / 5 Cuttings ** PVA pretreatment * Prior to printing a corona or plasma treatment has to be carried out. Upon request available in pretreated version. ** Design sheets are to be rolled with the patterned side on the inside (applies for both the and versions). We recommend that not more than 3 sheets be rolled per carton (480 x 480 mm). *** Ground must be a SIBU metal foil (ref , self adhesive). \ 10

* WL Carbonized Wood Antigrav WL Carbonized Wood Antigrav / 20158 Photo: fotolia.

11 * WL Carbonized Wood Antigrav WL Carbonized Wood Antigrav / Photo: fotolia.com WOODLINE WL Carbonized Wood Antigrav PPglass fibres Cutting, punching impregnated paper Drilling Material thickness mm 3,3 Sawing, milling Rolled packable Laser cutting Hot bending Thermoforming PVA compressible 1000 mm Special formats Maximum length mm 3000 Maximum width mm 1220 Spatula A2 Further thicknesses Profile groups 4 Cuttings * PVA pretreatment * Prior to printing a corona or plasma treatment has to be carried out. Upon request available in pretreated version. ** Ground must be a SIBU metal foil (ref , self adhesive). \ 11

DM OXIDIZED Silver AR DM OXIDIZED Silver AR / 20139 / 20187 DM OXIDIZED Platin AR DM OXIDIZED Titan AR DM OXIDIZED

abrasionresistant DM OXIDIZED AR DM OXIDIZED Platin AR / 20141 / 20189 HIPS Cutting, punching Print Material thickness

bending Thermoforming PVA compressible 150 mm DM OXIDIZED Titan AR / 20142 / 20190 Maximum width mm 1250 1220 Spatula A1

12 DM OXIDIZED Silver AR DM OXIDIZED Silver AR / / DM OXIDIZED Platin AR DM OXIDIZED Titan AR DM OXIDIZED Autumn AR / / DM OXIDIZED Copper AR / / DM OXIDIZED Nickel AR / / DECOLINE abrasionresistant DM OXIDIZED AR DM OXIDIZED Platin AR / / HIPS Cutting, punching Print Material thickness mm 1,0 1,13 Rolled packable Special formats Maximum length mm Drilling Sawing, milling Laser cutting Hot bending Thermoforming PVA compressible 150 mm DM OXIDIZED Titan AR / / Maximum width mm Spatula A1 Further thicknesses Profile groups 1 / 2 / 3 / 5 Cuttings PVA pretreatment * Ground must be a SIBU metal foil (ref , self adhesive). \ 12

DM SLIGHTLY USED Gold AR / 20153 / 20201 DM SLIGHTLY USED Gold AR DM SLIGHTLY USED Bronze AR / 20152 /

abrasionresistant DM SLIGHTLY USED AR HIPS Cutting, punching Print Material thickness mm 1,0 1,13 Rolled

13 DM SLIGHTLY USED Gold AR / / DM SLIGHTLY USED Gold AR DM SLIGHTLY USED Bronze AR / / DM SLIGHTLY USED Copper AR / / DM SLIGHTLY USED Titan AR / / DECOLINE abrasionresistant DM SLIGHTLY USED AR HIPS Cutting, punching Print Material thickness mm 1,0 1,13 Rolled packable Drilling Sawing, milling Laser cutting Hot bending Thermoforming PVA compressible 150 mm Special formats Maximum length mm Maximum width mm Spatula A1 Further thicknesses Profile groups 1 / 2 / 3 / 5 Cuttings PVA pretreatment * Ground must be a SIBU metal foil (ref , self adhesive). \ 13

USED Champagne AR / 20150 / 20198 USED Champagne AR USED Silver AR USED Silver AR / 20145 / 20193 USED Titan AR / 20144 / 20192 DECOLINE

cutting Hot bending Thermoforming PVA compressible 150 mm Special formats Maximum length mm 3000 3000 Maximum width mm 1250 1220 Spatula

14 USED Champagne AR / / USED Champagne AR USED Silver AR USED Silver AR / / USED Titan AR / / DECOLINE abrasionresistant USED AR HIPS Cutting, punching Print Material thickness mm 1,0 1,13 Rolled packable Drilling Sawing, milling Laser cutting Hot bending Thermoforming PVA compressible 150 mm Special formats Maximum length mm Maximum width mm Spatula A1 Further thicknesses Profile groups 1 / 2 / 3 / 5 Cuttings PVA pretreatment * Ground must be a SIBU metal foil (ref , self adhesive). \ 14

USED Ivory AR / 20149 / 20197 USED Steel AR USED Sand

DECOLINE abrasionresistant USED AR USED Steel AR /

thickness mm 1,0 1,13 Rolled packable Drilling Sawing,

compressible 150 mm Special formats Maximum length mm

15 USED Ivory AR / / USED Steel AR USED Sand AR / / USED Bronze AR / / DECOLINE abrasionresistant USED AR USED Steel AR / / HIPS Cutting, punching Print Material thickness mm 1,0 1,13 Rolled packable Drilling Sawing, milling Laser cutting Hot bending Thermoforming PVA compressible 150 mm Special formats Maximum length mm Maximum width mm Spatula A1 Further thicknesses Profile groups 1 / 2 / 3 / 5 Cuttings PVA pretreatment * Ground must be a SIBU metal foil (ref , self adhesive). \ 15

DM REFINED METAL Silver AR / 20155 / 20203 DM REFINED METAL Titan AR DM REFINED METAL Titan AR / 20156 / 20204 DECOLINE

milling Laser cutting Hot bending Thermoforming PVA compressible 150 mm Special formats Maximum length mm 3000 3000 Maximum width mm

16 DM REFINED METAL Silver AR / / DM REFINED METAL Titan AR DM REFINED METAL Titan AR / / DECOLINE abrasionresistant DM REFINED METAL AR HIPS Cutting, punching Print Material thickness mm 1,0 1,13 Rolled packable Drilling Sawing, milling Laser cutting Hot bending Thermoforming PVA compressible 150 mm Special formats Maximum length mm Maximum width mm Spatula A1 Further thicknesses Profile groups 1 / 2 / 3 / 5 Cuttings PVA pretreatment * Ground must be a SIBU metal foil (ref , self adhesive). \ 16

17 nonadhesive strongly adhesive wet room suitability limited suitability for wet rooms flameretardant versionavailable on request PR digital printing possible digital/screen printing possible AR abrasionresistant AR scratchresistant entire panel length not shown in image * digital/screen printing possible Prior to printing a corona or plasma treatment has to be carried out. By request available in pretreated version. SIBU DESIGN GmbH & CoKG Jupiterstraße Ternberg Austria Tel.: 43 (0) Fax: 43 (0) info@sibu.at SIBU DESIGN_0118_GB This information tool was provided according to the best knowledge and with special care. The information is based on practical experiences, test results as well as on inhouse testing and corresponds to our today s state of knowledge. Detailed info sheets are available on request. No liability is accepted for misprints, norm errors and mistakes!

NEWS UPDATE 1.5 A SIBU MAGNETIC. magnetic design sheets

NEWS UPDATE 1.5 A SIBU MAGNETIC magnetic design sheets SIBU MAGNETIC 02 NEW LOOKS MADE EASY! PROFESSIONAL DECORATION CHANGES ARE NOW CHILD S PLAY! Decoration redesigns that are ready in a flash, simple