TE Connectivity DEUTSCH DTS Series MIL-DTL Series III Metal Connectors
|
|
|
- Aron Burns
- 6 years ago
- Views:
Transcription
1 Applications Features TE Connectivity DEUTSCH DTS Series MIL-DTL Series III Metal Connectors High-performance military aircraft Commercial aircraft Communications equipment Armored personnel carriers & tanks High temperature industrial equipment Missiles Shipboard High reliability Outstanding EMI/RFI shielding protection High density Self-locking connector systems MIL-DTL Scoop-proof contact protection INTERMATEABLE WITH SOURIAU CONNECTORS AND ALL MIL-DTL SERIES III TE DEUTSCH DTS series MIL-DTL series III metal connectors offer high density contact arrangements in a miniature metal circular connector. DTS connectors meet MIL and were originally designed as military and aerospace components. The TE DEUTSCH DTS series is now being used in many applications requiring extremely reliable interconnections. These TE DEUTSCH connectors are quick-mating, environmentally-sealed, triple-lead threaded, have a self-locking coupling, and are EMI- RFI-shielded. A variety of D38999 backshells are available. For full product details on the TE DEUTSCH DTS series MIL-DTL series III metal connectors, please see the specifications below. TE Connectivity DEUTSCH DTS Series MIL-DTL Series III Metal Connectors For assistance in Europe and China, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 61
2 TE CONNECTIVITY DEUTSCH DTS SERIES MIL-DTL SERIES III METAL CONNECTORS TECHNICAL SPECIFICATIONS MATERIALS AND FINISHES Shell Shell Plating Contacts Contact Platings Insulator Seals ELECTRICAL DATA Wire Range s Insulation Resistance Aluminium alloy or stainless steel Electroless Nickel, Olive Drab Chromate over nickel, Black Zinc Nickel, Nickel PTFE Copper alloy 50u" gold plated Rigid plastic dielectric Fluorinated silicone based elastomer 12-24AWG 5000 Megaohms minimum at 77ºF (25ºC) Contact Resistance of mated contacts end to end Test Voltage ac rms CONTACT SIZE MAXIMUM MILLIVOLT DROP 22D SERVICE SEA LEVEL 100,000 FEET ALTITUDE RATING MATED UNMATED MATED UNMATED M N I II Operating Voltage SERVICE RATING N M I II Operating Voltage 300VAC/450VDC 400VAC/500VDC 600VAC/850VDC 900VAC/1250VDC Current Rating WIRE SIZE CONTACT SIZE MAX. CURRENT FOR TEST IN AMPS POTENTIAL DROP MILLIVOLT AT 77 F (25 C) < < < < < <50 MECHANICAL DATA Operating Temperature Z - Black Zinc Nickel -65 C to +175 C (-85 F to +347 F) W - Olive drab -65ºC to +175ºC (-85ºF to +347ºF) F - Electroless nickel -65ºC to +200ºC (-85ºF to +392ºF) K - Stainless steel -65ºC to +200ºC (-85ºF to +392ºF) S - Electrodeposited nickel stainless steel -65ºC to +200ºC (-85ºF to +392ºF) Sealing Against sand, dust per MIL-STD-202 & ice resistance 62 For assistance in North America: for Pricing/Delivery or Tech Support sales@peigenesis.com
3 Technical Specifications MECHANICAL Data Wire Sealing Range Contact Insulation Strip Length Mating Life Salt Spray Temp Durability Minimum Maximum Inches MM Inches MM 22D (Coax) (Twinax) Contact Chemical Resistance Inches Strip Length 22D mating cycle Z - Black Zinc Nickel, 500 hours per MIL-STD-1344A method 1001 condition C W - Olive Drab, 500 hours per MIL-STD-1344A method 1001 condition C F - Electroless Nickel, 48 hours per MIL-STD-1344A method 1001 conditon B K - Stainless Steel, 2000 hours per MIL-STD-1344A method 1001 condition C S - Electrodeposited Nickel Stainless Steel, 2000 hours per MIL-STD-1344A method 1001 condition C Z - Black Zinc Nickel -65 C to +175 C (-85 F to +347 F) W - Olive drab -65ºC to +175ºC (-85ºF to +347ºF) F - Electroless nickel -65ºC to +200ºC (-85ºF to +392ºF) K - Stainless steel -65ºC to +200ºC (-85ºF to +392ºF) S - Electrodeposited nickel stainless steel -65ºC to +200ºC (-85ºF to +392ºF) Lubricating oils, hydraulic fluids, coolants, deicing fluids per MIL-STD-1344A Method 1016 condition a-1 Sine Vibration 60g at -55 C per MIL-DTL-38999L Random Vibration Shock EMI Shielding Effectiveness Contact Type 49.5 grms at ambient temperatures 300 grms Number of Circuits 2 to 128 Contact Insertion Polarization Approvals Contact Retention 100 MHz to 10 GHz - minimum attenuation of 50dB Crimp, fiber optic, coax, twinax, or printed circuit Rear Insertion/Rear Extraction with simple plastic or high quality metal hand tools Five keyways with optional master keyway rotations (Note insert and main keyways remain fixed) MIL-DTL Retention Axial Load +/-10 percent MM Separation Force Minimum (INITIAL) Contact Newtons Lbs. Newtons ounces 22D Twinax TE Connectivity DEUTSCH DTS Series MIL-DTL Series III Metal Connectors For assistance in Europe and China, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 63
4 TE Connectivity DEUTSCH DTS Series MIL-DTL Series III Metal Connectors How to Order DTS/D38999 Series Connectors D38999/20 F A35 P A -L/C shell style FInish Layout COntact Polarization Modifier (Military part number example) DTS20 F 9-35 P A LC shell style FInish Layout COntact Polarization (Omit for normal) (Commercial part number example) STEP 1: Select Shell Style, Plug or Receptacle D38999/20 DTS20 Flanged Receptacle Receptacles D38999/24 DTS24 Jam Nut Receptacle F = Electroless Nickel K = Stainless Steel -45dB G = Space Grade, Outgassed Mates with STEP 2: Select Finish Plugs D38999/26 DTS26 Cable Plug W = Olive Drab Chromate over Cadmium over Electroless Nickel S = Stainless Steel / Electorless Nickel -65dB Z = Black Zinc Nickel Modifier Available with PC pins. Contact us for more details. 64 For assistance in North America: for Pricing/Delivery or Tech Support sales@peigenesis.com
5 How to Order DTS/D38999 Series Connectors STEP 3: Select Layout a See page 66 for listing by # of contacts Military Commercial Service D38999 Layout DTS Layout Rating Total Number A M 6 6 Contacts A I D B I B M B I 6 6 B I 7 7 C I 4 4 C I 8 8 C M C I D II 5 5 D I D I D I D M D I E I 6 6 E II 8 8 E I E M I 2 2 E I F II F I F M G I G II G M G I G I G N 4 4* H II H M H I H I J I J I J N * 3** J I J I J M J I * J I * Coax **Twinax STEP 4: Select Contact P = Pin S = Socket H =1500 cycle Pin contacts (military only) J =1500 cycle Socket contacts (military only) Note: See Step 6 if you are not ordering contacts with part. A = Less Pin Contacts B = Less Socket Contacts May be used for special contact types (PC Pin, Thermocouple, Fibre Optic). U = PCB Pin contacts (commercial only) M = PCB socket contacts (commercial only) STEP 5: Select Polarization N = Normal (Standard) A = Next Most Popular B = Not Popular (limited availability) C = Check for availability D = Check for availability E = Check for availability SHELL SIZE 9 POLARI- ZATION MINOR KEY LOCATIONS AR & AP BR & BP CR & CP DR & DP N A B C D E N A B C D E N A B C D E N A Receptacle B C D E STEP 6: Select Modifier Plug For other commercial modification, i.e., less tools, with pc contact or with endbell, call. Omit for standard contacts LC = for use with standard contacts, but supplied without contacts, seal plugs or tools (PO must state Less Contacts) Note: LC is not marked on part TE Connectivity DEUTSCH DTS Series MIL-DTL Series III Metal Connectors For assistance in Europe and China, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 65
6 TE Connectivity DEUTSCH DTS Series MIL-DTL Series III Metal Connectors Layouts by number of contacts =22 =20 =16 =12 =8 Layout * * # of Contacts 6 - # #20 1- #8 5 - # # # #20 Service Rating M I I M I Layout * # of Contacts 7 - #20 4 -# # # # # #20, 1 - #16 Service Rating I I I M I II I Layout * * # of Contacts 18 - # # # #20, 4 - # # # #20 Service Rating I I M I I II I Layout * 17-99* 19-11* * # of Contacts 55 - # # #20, 2 - # # # # #12 Service Rating M I I II I M I Layout * 23-21* # of Contacts 16 - # # #16, 37 - # # # #16 Service Rating II M I I N II M A B L NP C K UV R D J T S E H G F Layout 23-35* * 25-04* 25-19* 25-20* # of Contacts # # # #20, 8 - # # #20, 13 - #16, 4 - #12, 3 - #8 Service Rating M I I I I N 66 For assistance in North America: for Pricing/Delivery or Tech Support sales@peigenesis.com
7 Pins Contact Sockets Contact Wire Crimp Range Wire Crimp Range Pin Part Number Socket Part Number Color Bands Color Bands Contacts Wire Strip Lengths In. MM Min. In. Wire Strip Lengths In. MM Min. In. Wire Insulation Sealing Range Wire Insulation Sealing Range Min. MM Max. In. Max. MM Insert head first, trim excess Wire Hole Filler Wire Hole Filler Color 22D 28,26,24,22 M39029/ Orange Yellow Gray MS Black 20 24,22,20 M39029/ Orange Green Brown MS Red 16 20,18,16 M39029/ Orange Green Red MS Blue 12 14,12 M39029/ Orange Green Orange MS Yellow Min. MM Max. In. Max. MM Insert head first, trim excess Wire Hole Filler Wire Hole Filler Color 22D 28,26,24,22 M39029/ Orange Blue Black MS Black 20 24,22,20 M39029/ Orange Blue Orange MS Red 16 20,18,16 M39029/ Orange Blue Yellow MS Blue 12 14,12 M39029/ Orange Blue Green MS Yellow TE Connectivity DEUTSCH DTS Series MIL-DTL Series III Metal Connectors For assistance in Europe and China, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 67
8 TE Connectivity DEUTSCH DTS Series MIL-DTL Series III Metal Connectors Pins Contact Sockets Hand Crimp Turret Head (locator) Turret Head (locator) Color Power Crimp Contact s Power Locator Insertion MetaL Extraction Insertion/ Extraction Plastic Insertion Tip Color Extraction Tip Color 22D M22520/2-01 M22520/ WA22 M22520/2-09 MS27495A22M MS27495A22M M81969/14-01 Green White 20 M22520/1-01 M22520/1-04 Red WA27F M22520/1-04 MS27495A20 MS27495A20 M81969/14-10 Red Orange 16 M22520/1-01 M22520/1-04 Blue WA27F M22520/1-04 MS27495A16 MS27495A16 M81969/14-03 Blue White 12 M22520/1-01 M22520/1-04 Yellow WA27F M22520/1-04 DAK95-12B DRK95-12B M81969/14-04 Yellow White Contact Hand Crimp Turret Head (locator) Turret Head (locator) Color Power Crimp Power Locator Insertion MetaL Extraction Insertion/ Extraction Plastic Insertion Tip Color Extraction Tip Color 22D M22520/2-01 M22520/ WA22 M22520/2-09 MS27495A22M MS27495A22M M81969/14-01 Green White 20 M22520/1-01 M22520/1-04 Red WA27F M22520/1-04 MS27495A20 MS27495A20 M81969/14-10 Red Orange 16 M22520/1-01 M22520/1-04 Blue WA27F M22520/1-04 MS27495A16 MS27495A16 M81969/14-03 Blue White 12 M22520/1-01 M22520/1-04 Yellow WA27F M22520/1-04 DAK95-12B DRK95-12B M81969/14-04 Yellow White 68 For assistance in North America: for Pricing/Delivery or Tech Support sales@peigenesis.com
9 TYPE 26 PLUG Shell A/9 B/11 C/13 D/15 E/17 F/19 G/21 H/23 J/25 Dimensions Shell F +.008/-0 (+0.2/-0) G +/-.004 (+/-0.1) S Max. Rear Metric Thread (Plated) Mass max.* A/9.720 (18.4).470 (11.9).860 (21.8) M12x1.0-6g 0.100R g B/ (21.1).590 (14.9).980 (25.0) M15x1.0-6g 0.100R g C/ (25.4).700 (17.9) 1.16 (29.4) M18x1.0-6g 0.100R g D/ (28.7).860 (21.9) 1.28 (32.5) M22x1.0-6g 0.100R g E/ (32.2).980 (24.9) 1.41 (35.7) M25x1.0-6g 0.100R g F/ (34.9) 1.10 (27.9) 1.52 (38.5) M28x1.0-6g 0.100R g G/ (38.1) 1.22 (30.9) 1.64 (41.7) M31x1.0-6g 0.100R g H/ (41.1) 1.33 (33.9) 1.77 (44.9) M34x1.0-6g 0.100R g J/ (44.3) 1.45 (36.9) 1.89 (48.0) M37x1.0-6g 0.100R g B +/-.012 (+/-0.3) 0.94 (23.80) 1.03 (26.20) 1.13 (28.60) 1.22 (31.00) 1.31 (33.30) 1.44 (36.50) 1.56 (39.70) 1.69 (42.90) 1.81 (46.00) C1 C2 D Max (18.26) 0.81 (20.62) 0.91 (23.01) 0.97 (24.61) 1.06 (26.97) 1.16 (29.36) 1.25 (31.75) 1.38 (34.93) 1.50 (38.10) 0.59 (15.09) 0.72 (18.26) 0.81 (20.62) 0.91 (23.01) 0.97 (24.61) 1.06 (26.97) 1.16 (29.36) 1.25 (31.75) 1.38 (34.93) 31 max. TYPE 20 SQUARE FLANGE F G Ø S 13,50 ± 0,6 12,95 max. 12, (20.90) 0.82 (20.90) 0.82 (20.90) 0.82 (20.90) 0.82 (20.90) 0.82 (20.90) 0.79 (20.10) 0.79 (20.10).79 (20.10) E / (+0 / -0.4).008/.100 (2.10/2.50).008/.100 (2.10/2.50).008/.100 (2.10/2.50).008/.100 (2.10/2.50).008/.100 (2.10/2.50).008/.100 (2.10/2.50).008/.130 (2.10/3.20).008/.130 (2.10/3.20).008/.130 (2.10/3.20) 12,95 max. F +/-.004 (+/-0.1).620 (15.75).740 (18.90).870 (22.10).990 (25.25) 1.18 (29.95) 1.24 (31.55) 1.37 (34.70) 1.49 (37.90) 1.62 (41.10) G +/-.004 (+/-0.1).470 (11.90).590 (14.90).700 (17.90).860 (21.90).980 (24.90) 1.10 (27.90) 1.22 (30.90) 1.33 (33.90) 1.45 (36.90) P +/-.008 (+/-0.2).130 (3.25).130 (3.25).130 (3.25).130 (3.25).130 (3.25).130 (3.25).130 (3.25).150 (3.91).150 (3.91) PP +/-.008 (+/-0.2).220 (5.49).190 (4.93).190 (4.93).190 (4.93).190 (4.93).190 (4.93).190 (4.93).240 (6.15).240 (6.15) 17,30 max. Ø 8,75 max. Rear Metric Thread (Plated) M12x1.0-6g 0.100R M15x1.0-6g 0.100R M18x1.0-6g 0.100R M22x1.0-6g 0.100R M25x1.0-6g 0.100R M28x1.0-6g 0.100R M31x1.0-6g 0.100R M34x1.0-6g 0.100R M37x1.0-6g 0.100R Mass max.* g g g g g g g g g TE Connectivity DEUTSCH DTS Series MIL-DTL Series III Metal Connectors All dimensions in inches (millimeters in parenthesis) For assistance in Europe and China, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 69
10 TE Connectivity DEUTSCH DTS Series MIL-DTL Series III Metal Connectors TYPE 24 JAM-NUT Shell 12,06 5 A +/-.012 (+/-0.3) B +/-.016 (+/-0.4) E +.004/-.028 (+0.1/-0.7) F +/-.004 (+/-0.1) Dimensions G +/-.004 (+/-0.1) M min./max. Rear Metric Thread (Plated) Mass max.w* A/ (30.20) 1.06 (27.00).09 (2.20).62 (15.75).47 (11.90).86/.94 (21.82/24.00) M12x1.0-6g 0.100R g B/ (34.90) 1.25 (31.80).09 (2.20).74 (18.90).59 (14.90).98/1.06 (24.99/27.00) M15x1.0-6g 0.100R g C/ (38.10) 1.37 (34.90).09 (2.20).87 (22.10).70 (17.90) 1.17/1.26 (29.77/32.00) M18x1.0-6g 0.100R g D/ (41.30) 1.50 (38.10).09 (2.20).99 (25.25).86 (21.90) 1.30/1.42 (32.91/36.00) M22x1.0-6g 0.100R g E/ (44.50) 1.63 (41.30).09 (2.20) 1.18 (29.95).98 (24.90) 1.42/1.46 (36.12/37.00) M25x1.0-6g 0.100R g F/ (49.20) 1.81 (46.00).12 (3.00) 1.24 (31.55) 1.10 (27.90) 1.55/1.61 (39.25/41.00) M28x1.0-6g 0.100R g G/ (52.40) 1.94 (49.20).12 (3.00) 1.37 (34.70) 1.22 (30.90) 1.67/1.81 (42.47/46.00) M31x1.0-6g 0.100R g H/ (55.60) 2.06 (52.40).12 (3.00) 1.49 (37.90) 1.33 (33.90) 1.80/1.97 (45.61/50.00) M34x1.0-6g 0.100R g J/ (58.70) 2.19 (55.60).12 (3.00) 1.62 (41.10) 1.45 (36.90) 1.94/2.02 (49.25/51.23) M37x1.0-6g 0.100R g All dimensions in inches (millimeters in parenthesis) 12,95 max. 70 For assistance in North America: for Pricing/Delivery or Tech Support sales@peigenesis.com
11 Accessories DUMMY RECEPTACLES, DUST CAPS & PLUG CAPS D38999 DTS Dummy Receptacles CABLE CLAMPS Receptacle Dust Caps For Flanged For Jam Nut Plug Dust Cap A 9 D38999/22A** D38999/33**9R D38999/33**9N D38999/32**9## B 11 D38999/22B** D38999/33**11R D38999/33**11N D38999/32**11## C 13 D38999/22C** D38999/33**13R D38999/33**13N D38999/32**13## D 15 D38999/22D** D38999/33**15R D38999/33**15N D38999/32**15## E 17 D38999/22E** D38999/33**17R D38999/33**17N D38999/32**17## F 19 D38999/22F** D38999/33**19R D38999/33**19N D38999/32**19## G 21 D38999/22G** D38999/33**21R D38999/33**21N D38999/32**21## H 23 D38999/22H** D38999/33**23R D38999/33**23N D38999/32**23## J 25 D38999/22J** D38999/33**25R D38999/33**25N D38999/32**25## ** Select Code for Plating W = Aluminium Olive Drab over Chromate F = Aluminium Electroless Nickel K = Stainless Steel G = Aluminium Electroless Nickel Space Grade D38999 DTS ## = Select code for ring or loop N = Ring to attach to backshell as shown R = Loop for screw mounting Cable Range Straight Right Angle Min Max Low Cost Self Locking Low Cost Self Locking inches MM inches MM A 9 M85049/38-9** M85049/38S9** M85049/39-9** M85049/39S9** B 11 M85049/38-11** M85049/38S11** M85049/39-11** M85049/39S11** C 13 M85049/38-13** M85049/38S13** M85049/39-13** M85049/39S13** D 15 M85049/38-15** M85049/38S15** M85049/39-15** M85049/39S15** E 17 M85049/38-17** M85049/38S17** M85049/39-17** M85049/39S17** F 19 M85049/38-19** M85049/38S19** M85049/39-19** M85049/39S19** G 21 M85049/38-21** M85049/38S21** M85049/39-21** M85049/39S21** H 23 M85049/38-23** M85049/38S23** M85049/39-23** M85049/39S23** J 25 M85049/38-25** M85049/38S25** M85049/39-25** M85049/39S25** TE Connectivity DEUTSCH DTS Series MIL-DTL Series III Metal Connectors ** Select Plating W = Aluminium Olive Drab over Chromate F = Aluminium Electroless Nickel K = Stainless Steel G = Aluminium Electroless Nickel Space Grade All dimensions in inches (millimeters in parenthesis) For assistance in Europe and China, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 71
12 TE Connectivity DEUTSCH DTS Series MIL-DTL Series III Metal Connectors STANDARD MIL-SPEC Mil-Spec Prefix M85049/62 M85049/32 M85049/17 M85049/29 M85049/85 M85049/86 M85049/87 M85049/27 Sealed EMI/RFI S = Straight A = 90 Degrees B = 45 Degrees Accessories Endbell Type Y N S Heat Shrink Boot Adapters N N S Extender Backshell with cable clamp Y Y S Environmental Shielded Endbell N Y S Non-Environmental Shielded Endbell Y Y S B A Banding Adapter Description N N S Compression Nut Wire Seal Compression Nut NOTE: If military-standard versions won t work for your applications, please contact us with your requirements. Designed for use with straight or right angle shrink boots. A knurled rear section with a boot groove provide an excellent surface for the boot to grab the metal endbell. Available with lock wire and drain holes. See Heat Shrink Boots on a See Heat Shrink Boots on pages Non-environmental, designed for use with jacketed cable, allows extra space to break out the wires and still provide stain relief clamping to the outside of the cable jacket. This EMI/RFI shielding environmentally sealing endbell features a standard style cable clamp with gland seal at the end of and extender style backshell. This EMI/RFI shielding non-environmentally sealing endbell features a standard style cable clamp. Banding adapters utilize a band of metal that fastens and grounds cable shields to the outside of endbells. This method of terminating shields has advantages in that they typically use tools to tighten trim the bands. These tools make the termination tight, repeatable, reworkable (if you make a mistake just cut the band off and start again) and facilitates service. Banding adapters help lower the total applied cost by having simpler designs that have fewer parts with uncomplicated assembly procedures. 72 For assistance in North America: for Pricing/Delivery or Tech Support sales@peigenesis.com
13 Wire Stripping Strip insulation from end of wire to be crimped. (See table for proper stripping dimensions.) Do not cut or damage wire strands. CONTACT CRIMPING correct crimp incorrect crimp STEP 1: Strip wires. See above for correct strip length for contact. Insert wire into rear of contact. Wire insulation must push against rear of contact. Wire must be visible through inspection hole. CONTACT INSERTION STEP 1: Remove hardware from plug or receptacle and slip over wire bundle in proper order for reassembly. Assembly Instructions STEP 2: M22520 series crimp tool and locator is recommended. asee page 68 here for choice of turret head and selection setting according to correct size, part number and wire gauge size. STEP 2: Using proper plastic or metal insertion tool for corresponding contact, position wire in tip of the tool so that the tool tip presses against the contact shoulder. A WIRE SIZE A 22, 22M, 22D.125 (3.18) (4.77) (4.77) (4.77) (8.51) 8 (power).470 (11.99) STEP 3: Insert contact and wire into tool jaws. To crimp, squeeze handles together fully until ratchet releases and allows handles to expand; otherwise, contact cannot be extracted from tool jaws. Maintain slight insertion pressure on wire while crimping contact to wire.* STEP 3: Press tool against contact shoulder and, with firm and even pressure, insert wired contact and tool tip into center contact cavity. TE Connectivity DEUTSCH DTS Series MIL-DTL Series III Metal Connectors STEP 4: When contact bottoms, a slight click can be heard as tines of metal retaining clip snap into place behind contact shoulder. STEP 5: Remove tool and pull back lightly on wire to make sure contact is properly seated. Repeat operation with remainder of contacts to be inserted, beginning with the center cavity and working outward in alternating rows. STEP 6: After all contacts are inserted, fill any empty cavities with wire sealing plugs. Reassemble plug or receptacle hardware. For assistance in Europe and China, please see the back cover for a complete listing of our branch offices and contact numbers. Specifications subject to change. 73
14 TE Connectivity DEUTSCH DTS Series MIL-DTL Series III Metal Connectors STEP 1: Remove hardware from plug or receptacle and slide hardware back along wire bundle. STEP 4: Hold wire firmly in tool and extract wired contact and tool. Repeat operation for all contacts to be extracted. Note: DTS series shown. Assembly Instructions STEP 2: Using plastic or metal extraction tool with proper color code corresponding to contact size, place wire in tool. STEP 5: Fill any empty cavities with wire sealing plugs. Reassemble plug or receptacle hardware. STEP 3: Insert tool into contact cavity until tool tip bottoms against the contact shoulder, expanding clip retaining tines. 74 For assistance in North America: for Pricing/Delivery or Tech Support
8D Series MIL-DTL Series III
8D Series MIL-DTL-38999 Series III 8D Series - MIL-DTL-38999 Series III Contents Overview Common Section MIL-DTL-38999: A universal product platform... 04 8D Series - Presentation... 05 Product overview...
Stainless Steel Series MIL-DTL Series III
8D - D38999 Stainless Steel Series Stainless Steel Series MIL-DTL-38999 Series III 39 8D Series - MIL-DTL-38999 Series III Description High contact density Screw coupling Contact protection: 100% Scoop
ACT. Summary. 1 Introduction. 2 Synoptic. 3 Technical characteristics. 4 Part-numbering system. 5 Arrangements. 6 Receptacles. 7 Plug / Panel seal
Summary 1 Introduction 2 Synoptic 3 Technical characteristics 4 Part-numbering system 5 Arrangements 6 Receptacles 7 Plug / Panel seal 8 Mating and unmating dimensions 9 Mounting cutouts 10-11 Contacts
Series 805 Mighty Mouse Triple-Start ACME Thread Receptacle
Mighty Mouse and Ordering Information Three Mounting Options: Jam nut with O-ring for rear panel mounting, square flange for front or rear panel mounting, or in-line receptacles for free-hanging cables.
Amphenol Fast Connector
Amphenol The Winning Connection Amphenol Fast Connector For all your Autosport connector requirements Fast Connector Series For Autosport Applications Contact Arrangement Amphenol have developed the FAST
2M Series Selection Table. 2M801, 2M803, 2M804 and 2M805
M Series Selection Table M0, M0, M0 and M0 SERIES M0 M0 M0 M0 PAGES Page -0 Pages - Pages - Pages -0 TYPE Dual-Start ACME Thread Bayonet Push-Pull Tri-Start ACME Thread DESCRIPTION More rugged keys and
DETAIL SPECIFICATION
INCH - POUND MIL-DTL-26482H 27 June 2017 SUPERSEDING MIL-DTL-26482H w/amendment 2 21 June 2013 DETAIL SPECIFICATION CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, QUICK DISCONNECT, ENVIRONMENT RESISTING,
Data Bus Connector and Terminator Requirements Document DB-1001-A. Revision C
Data Bus Connector and Terminator Requirements Document DB-1001-A Revision C 2507 W. Geneva Dr. Tempe, Arizona 85282 Phone [602] 231-8616 FAX [602] 273-9135 www.phxlogistics.com TABLE OF CONTENTS 1. Introduction
DETAIL SPECIFICATION CONNECTORS, ELECTRICAL, (CIRCULAR, ENVIRONMENT RESISTING), RECEPTACLES AND PLUGS, GENERAL SPECIFICATION FOR
INCH - POUND MIL-DTL-83723F 20 October 2000 SUPERSEDING MIL-C-83723E 15 May 1992 DETAIL SPECIFICATION CONNECTORS, ELECTRICAL, (CIRCULAR, ENVIRONMENT RESISTING), RECEPTACLES AND PLUGS, GENERAL SPECIFICATION
Amphenol RF- SMA Connector Series
Page 1 of 8 enter part number Products 7/16 1.0/2.3 1.6/5.6 AMC BNC / RP-BNC C FAKRA SMB FME HN MCX Mini-UHF Mini 75 Ohm SMB MMCX Precision (APC) QDS QMA QWS SC SlimLine BNC SMA / RP-SMA SMB SMC SMP TNC
DETAIL SPECIFICATION
INCH-POUND MIL-DTL-38999L 30 May 2008 SUPERSEDING MIL-DTL-38999K 17 December 1999 DETAIL SPECIFICATION CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, HIGH DENSITY, QUICK DISCONNECT (BAYONET, THREADED, AND
Extended-Frequency SMA Connectors
Extended-Frequency SM Connectors Extended-Frequency SM Connectors This brochure introduces two new series of connectors that extend SM performance beyond the MIL-PRF-39012 upper frequency limit of 18 GHz,
D*MA Connectors
3401-002 D*MA Connectors Features/Benefits D*Sub Connector type Removable Contacts technology Standard and High Density available From 9 to 104 ways ESCC Specification. Reference 3401002 Typical Applications
Cobra. Innovative shielded low profile right angle connector plug and backshell assemblies reduce MIGHTY MOUSE
MIGHTY MOUSE Cobra The Ultra-Low Profile EMI/RI Plug and ackshell Assembly Innovative shielded low profile right angle connector plug and backshell assemblies reduce clearance requirements without compromising
RECTANGULAR INFINITE POSSIBILITIES. Amphenol. Rectangular and Filtered Products. Micro-D. D-Sub. Rectangular and JN1122 ARINC 404
INFINITE POSSIBILITIES. Amphenol Micro-D D-Sub Rectangular 38999 83733 and JN1122 Rectangular and Filtered Products ARINC 404 ARINC 600 AMPHENOL MICRO-D Amphenol Phoenix Interconnect Micro Connectors provide
DETAIL SPECIFICATION SHEET
METRIC MIL-DTL-83526/21 28 August 2008 DETAIL SPECIFICATION SHEET CONNECTOR, FIBER OPTIC, CIRCULAR HERMAPHRODITIC, BULKHEAD, LOW PROFILE WITHOUT STRAIN RELIEF, JAM-NUT MOUNT, 2 AND 4 POSITIONS, EXPANDED
STANDARD COAXIAL CONNECTORS
STANDARD COAXIAL CONNECTORS COAXI-KIT ISO 9001 APPROVED RADIALL COMPANY PROFILE Since 1952, RADIALL has specialized in the field of coaxial connectors and cables assemblies. RADIALL s experience and high
DETAIL SPECIFICATION
METRIC 15 July 2003 SUPERSEDING MIL-C-83527A 28 December 1988 DETAIL SPECIFICATION CONNECTORS, PLUG AND RECEPTACLE, ELECTRICAL, RECTANGULAR MULTIPLE INSERT TYPE, RACK TO PANEL, ENVIRONMENT RESISTING, 150
8STA/8TA SERIES. Compact Circular Connectors. Derived from MIL-DTL & JN1003
8TA/8TA ERIE Compact Circular Connectors Derived from MIL-DTL-38999 & JN1003 8TA/8TA eries Presentation OURIAU is a recognized worldwide market leader in the design and manufacture of connectors and interconnect
Feb12 Rev D
Product Specification AMPSEAL* Connectors 108-1329 01Feb12 Rev D 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for AMPSEAL* connectors. 1.2. Qualification
Cannon Trident Connector System
These are low installed cost connectors rated for up to 13 A and 250 V ac. They are typically used for circuit board and internal wiring applications. Snap Together connectors facilitate easy assembly
USB Connectors. USB Connectors. Interconnect Solutions Worldwide. D38999 Derived USB-A & USB-B Connector Assemblies for Harsh Environments
USB Connectors USB Connectors D38999 Derived USB-A & USB-B Connector Assemblies for Harsh Environments NCAGE Code U5792 www.polamco.com USB Connectors D38999 Derived USB-A & USB-B Connector Assemblies
High Reliability Hyperboloid Contacts
High Reliability Hyperboloid Contacts ICO SERIES TM Technology Company, Inc. integramate Hyperboloid Contacts QA Technology integramate TM Contacts are high quality, high reliability hyperboloid TM contacts
MAR 17 Rev B1
Product Specification 108-151010 01 MAR 17 Rev B1 DTM Series Connector System 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the TE Connectivity (TE) DTM
Bulletin 800F Plastic and Metal Operators 22.5 mm mounting hole IP65/66, Type 4/4X/13 Internationally rated operators
Bulletin F. mm Push Buttons Product Overview Bulletin F Plastic and Metal Operators. mm mounting hole IP/, Type /X/ Internationally rated operators Table of Contents See below. TABLE OF CONTENTS Page Specifications...
Expanded Beam Optical Termini
8D Series & ARINC 600 Series ELIOBEAM Fiber Optic Contact Expanded Beam Optical Termini The optical connection requirement for environmentally exposed mating cycles. Robust to contamination Large beam
ISO 9001:2008 CERTIFICATION. RoHS. Compliant
ISO 9001:2008 CERTIFICATION RoHS Compliant QUALITY You need to protect your customers and your brand s reputation by using the highest quality products. How do we ensure that our products are the highest
Multi-contact Compact Circular Connectors
Multi-contact Compact Circular Connectors RM Series Jun..06 Copyright 06 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. Product Specifications Ratings Rated current Rated voltage [RM5] 0 ( and 4 contacts)
Amphenol. Amphenol 97 Series Standard Cylindrical Connector. MIL-5015 Style Connectors widely used for:
mphenol 97 Series Standard ylindrical onnector 12-022-15 MIL-5015 Style onnectors widely used for: Factory utomation, Robotics Machine Tool, Instrumentation Welding quipment Medical quipment mphenol 97
15 Pin DSUB - MALE 15 Pin DSUB - FEMALE 9 Pin DSUB - MALE 9 Pin DSUB - FEMALE
Last Revised: 6 Oct 07 Description: This data sheet show our range of high quality appliance cables, such as signal cables (VGA / DVI / DisplayPort (DP)), Touchscreen and power cables. These are either
Bonding Leads. Metal Braids FLAT ROUND ROPES BONDING LEADS POWER SHUNTS. The answer to your cable management needs. INTRODUCTION
INTRODUCTION Metal Braids FLAT ROUND ROPES BONDING LEADS POWER SHUNTS. The answer to your cable management needs. From specialist manufacturers of high performance metal braid and earth bonding leads designed
2 2.2mm Pitch, Wire-to-Wire Connectors for Small Spaces
2 2.2mm Pitch, Wire-to-Wire Connectors for Small Spaces DF62 Series / DF62W Series Features 1. The slim, sleek design and smooth contour combine to complete connections in tight spaces. These connectors
Thermocouple Reference Table
Thermocouple is the description for electrical feedthroughs that are commonly used for temperature measurement systems. A thermocouple feedthrough does not measure temperature, but rather it is used to
DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, RECTANGULAR, MICROMINIATURE, MOUNTING HARDWARE
INCH-POUND MIL-DTL-83513/5H 3 April 2012 SUPERSEDING w/amendment 2 21 January 2010 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, RECTANGULAR, MICROMINIATURE, MOUNTING HARDWARE This specification is
Small Terminals. TEST CURRENT (Amps) Fig 1. Tensile strength of YAD HYLUG after axial rotation stresses. TENSILE STRENGTH IN POUNDS
B-2 Performance The terminals and splices in this catalog are approved, per MIL-T-7928 and/or UL 486, where indicated. Table 1 shows the performance requirements for terminals used in military and commercial
Mar11 Rev D
Product Specification 108-1542 11Mar11 Rev D Mini-Universal MATE-N-LOK* Connector 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for MATE-N-LOK* mini-universal
AVX Specialty Catalog
AVX Specialty Catalog MOBO Connectors www.avx.com Version 16.4 Table of Contents BATTERY ORS........................................................... 2-35 Standard 2.5mm Pitch 9155-000.............................................
Meter Swivels Insulated Unions Meter Sets Meter Accessories The Right Connection 1-800-654-3872 1-405-273-6302 www.centralplastics.com : Overview Georg Fischer Central Plastics entered the meter connection
Material and Process. Specification
s 146-67- 1 of 7 Document By: Title Name 1. Purpose 1.1 This document defines approved revision levels of Material and Process specifications used by Onboard Systems. This list is for supplier reference
Thermocouples and Accessories Product Catalog
Thermocouples and Accessories Product Catalog 7282 N. Haggerty Rd. Canton, MI 48187 P. 734-451-8740 / F. 734-451-8741 www.inspec-inc.com 1 P a g e EXPERT CONTROL AND INSTRUMENTATION REPAIR Plastics Industry
DEPARTMENT OF DEFENSE INTERFACE STANDARD
INCH-POUND MIL-STD-348B 19 February 2016 SUPERSEDING MIL-STD-348B w/change 1 6 March 2015 DEPARTMENT OF DEFENSE INTERFACE STANDARD RADIO FREQUENCY CONNECTOR INTERFACES FOR MIL-DTL-3643, MIL-DTL-3650, MIL-DTL-3655,
SECTION 2: PROBES. Page 2-1
SECTION 2: PROBES RTDs and thermocouples in a variety of configurations for easy installation Tip-sensitive and fast response probes for quick and accurate temperature sensing High temperature probes to
DETAIL SPECIFICATION. MICROPHONE, CARBON (MICROPHONE M-29( )/U and M-52( )/U) INACTIVE FOR NEW DESIGN AS OF 30 MARCH 1999
INCH-POUND MIL-DTL-11193E 20 August 2009 SUPERSEDING MIL-M-11193D(SigC) 31 July 1960 DETAIL SPECIFICATION MICROPHONE, CARBON (MICROPHONE M-29( )/U and M-52( )/U) INACTIVE FOR NEW DESIGN AS OF 30 MARCH
MGO INSULATED THERMOCOUPLES INDEX
MGO INSULATED THERMOCOUPLES INDEX PAGE General Information... M1 Part Numbering Examples... M4 Thermocouple Elements (MA)... M5 Leadwire Style Thermocouples (MB)... M6 Leadwire Style Thermocouples (MD,
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. CONTECH RESEARCH INC. 750 Narragansett Park Drive Rumford, RI Thomas Lamoureux
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CONTECH RESEARCH INC. 750 Narragansett Park Drive Rumford, RI 02916-1035 Thomas Lamoureux 401-865-6440 MECHANICAL Valid to: February 28, 2018 Certificate Number:
Welding Accessories
Welding Accessories www.airliquide.ca 1-800-817-7697 Welding Accessories BLUESHIELD Welding Cables Blueshield Welding Cables: Excellent flexibility (stays flexible at -50 C) Abrasion resistant Oil, solvent
Product Specification JUL 14 Rev. A1
Industrial SCSI Connector 1. Scope 1.1 Contents This specification covers the requirements for product performance, test methods and quality assurance provisions of SCSI Connector. 2. Applicable Documents
CMK - CMD Performance Data/Materials
O N N E T O R S MK M Performance ata/materials Performance ata Summary Electrical: ontacts: Pin#4 WG flexible pin Socket #4 WG precision machined barrel Wire range #4 WG to #30 WG solid and stranded other
SAPAG. A full range of API 526 flanged safety relief valves for process applications, gas, steam and liquid. Safety Relief Valve Series 8100/8200
SAPAG A full range of API 526 flanged safety relief valves for process applications, gas, steam and liquid. Features Full compliance to API RP 520 and standards 526, 527. Certified ASME Section VIII on
PRESSURE SWITCHES D-LT Electro-mechanical pneumatic pressure switches. 18D-LT x2 Electro-mechanical pneumatic pressure switches.
PRESSURE SWITCHES 8D-LT Electro-mechanical pneumatic pressure switches 8D-LT x Electro-mechanical pneumatic pressure switches Page -0 Page -0-0 8D-LT G/, / NPT or flange Microswitch with gold plated contacts
DETAIL SPECIFICATION CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES
INCH - POUND MIL-DTL-55302G 18 July 2017 SUPERSEDING MIL-DTL-55302G w/amendment 2 16 November 2015 1. SCOPE DETAIL SPECIFICATION CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES This specification
3M D Sub Socket 50 Position 8350 Series
M D Sub Socket 50 Position 850 Series IDC compatible Lower insertion/withdrawal force than other 50 position products Available in either open or closed end cover Mounting options include #4-40 UNC or
This product specification is written according to the Construction Specifications Institute MasterFormat, 2014 Update.
Kaf-Tech Product Specification This product specification is written according to the Construction Specifications Institute MasterFormat, 2014 Update. SECTION 260519 METAL CLAD CABLE - MC-PLUS Neutral
min. 50min. 65min. PIT / P3 / P4 Ø
Flush design Stop switch, IP 65 Equipment consisting of (schematic overview) 2 78 23 Actuator Anti-twist ring 2... 6 Pressure ring = Screw terminal Product can differ from the configuration. Bayonet flange
MOTORIZED VEHICLES DIVISION Connector Solutions for Automotive Applications
MOTORIZED VEHICLES DIVISION Connector Solutions for Automotive Applications About FCI With operations in 30 countries and sales of 1.25 billion euros in 2008, FCI is a leading manufacturer of connectors.
E-Z-Ground Grounding Systems. Ground Wire Size. Water Pipe Size. 1/2 in /4 in. 2 in /2 in. 3-1/2 in TB
Waterpipe Ground Clamps Cat. No. Ground Wire Size Water Pipe Size 2-TB 1/2 in., 3/4 in., 1 or rebar 4-10 3-TB 1-1/4 in., 1-1/2 in. or 2 in. #6, #4, 4 2-1/2 in., 3 in. or 3-1/2 in. #2 WG 5-TB 4 in., 4-1/2
Previous Page Return to Index Next Page
Previous Page Return to Index Next Page http://www.switchcraft.com/products/jack-107.html (1 of 8) [2/13/2005 2:31:54 PM] 3.5 mm SINGLE MONO AND STEREO JACKS 1. 35RAPC4BV4 2. 35RAPC2AV 3. 35RAPC2BHN2 4.
MIL-L-26764B 4 March 1970 SUPERSEDING MIL-L-26764(ASG) 12 December 1963 MILITARY SPECIFICATION
4 March 1970 SUPERSEDING MIL-L-26764(ASG) 12 December 1963 MILITARY SPECIFICATION LIGHT, MARKER, AIRPORT APPROACH, HIGH INTENSITY, TYPE MB-2 This specification has been approved by the Department of the
NCAGE Code U5792 Interconnect Solutions Worldwide
NCAGE Code U5792 www.polamco.com Interconnect Solutions Worldwide From 1976 beginnings to the present day. Polamco was founded in 1976 by David Polson as a high precision manufacturing engineering company.
NAVSEA STANDARD ITEM. 2.1 S9086-RJ-STM-010/CH-504, Pressure, Temperature and Other Mechanical and Electromechanical Measuring Instruments
NAVSEA STANDARD ITEM ITEM NO: 009-52 DATE: 29 JUL 2011 CATEGORY: II 1. SCOPE: 1.1 Title: Relief Valve; repair 2. REFERENCES: 2.1 S9086-RJ-STM-010/CH-504, Pressure, Temperature and Other Mechanical and
KNITTED CONDUCTIVE EMI GASKETS
KNITTED CONDUCTIVE EMI GASKETS CAPABILITIES At Laird Technologies our commitment to providing design engineers with a variety of solutions for controlling electromagnetic leakage is evident in the knitted
TEMPORARY PROTECTIVE GROUNDING EQUIPMENT
TEMPORARY PROTECTIVE GROUNDING EQUIPMENT TEMPORARY PROTECTIVE GROUNDING EQUIPMENT NOTE: When ordeing assemblies of grounding products, please make sure all items included in the assembly are only from
Cash Drawer Identification
Cash Drawer Identification Please use this document to identify the model of cash drawer that is on hand. An FAQ section is listed at the end. 15in MMF Metal Cash Drawer Quick Specs: 15 1/8 inches deep
Meter Connection Products: Overview
: Overview Georg Fischer Central Plastics entered the meter connection business in 1955 with the design and introduction of the insulated meter swivel and insulated union. We understand the critical nature
Shrink-Kon Thin Wall Heat Shrinkable Tubing
Shrink Ratio 2:1 Shrink-Kon Thin Wall Tubing Styles 2:1 Shrink Ratio, Non-Lined Flame retardant. Resistant to common fluids and solvents. Meets UL 224, 125 C; CSA C22.2 No. 198.1, 125 C; MIL-DTL-23053/5
WLC60 Heavy Duty LED Light
Datasheet Banner's WLC60 Heavy Duty Lights are engineered to withstand harsh environments, making it the first choice for a machine lighting solution. A conservative mechanical design protects against
Electrical Metallic Tubing (EMT) Fittings
Suggested Specifications for Electrical Metallic Tubing (EMT) Fittings Series 2 Insulated EMT Connector (Raintight) (Compression Type) Series 20 EMT Coupling (Raintight) (Compression Type) Series 0 Pipe
Positronic Provides Complete Capability
Experience Founded in 1966 Involvement in the development of international connector specifications through EIA, IEC and ISO as well as PICMG. Introduction of new and unique connector products to the electronics
FINGERSTOCK GASKETS. Physical Characteristics. Specific weight: 8.4g/cm 3 Melting point: 900 C Coefficient to expansion:
FINGERSTOCK GASKETS Application Due to their outstanding material and electrical characteristics, beryllium copper finger of different shapes and dimension are used in the following industries: Broadcasting,
TECHNICAL SPECIFICATION Conductive Elastomer Molded Gaskets
Pag. 1/6 TECHNICAL SPECIFICATION Conductive Elastomer Molded Gaskets This category of items is in continuous evolution. The raw material from which it is made is the first component that must be analyzed
UNDERGROUND SERVICES SECONDARY
Reference UNDERGROUND SERVICES SECONDARY Underground services secondary... U- 1 General requirements for underground service... U- 2 Name of parts for underground service... U- 3 Conduit layouts... U-
2.54mm Pitch Board to Cable Connector
2.54mm Pitch Board to Cable Connector FRC5 Series Conforming Standard MIL-DTL-8353 FETURE UL pproved (File No. E72124) Conform to MIL-DTL-8353 Polarizing key prevents from mis-mating. SPECIFICTIONS Rated
Pressure transducers DMU 02 Vario (flush)
Process engineering (flush) Ideal for hygienic processes Connection technology with numerous versions Extremely resistant to shock, pulsation and vibration Best dynamic pressure resistance at high load
WWW.SAMSUNGPJS.CO.KR SAMSUNG Pipe Joint System, is a manufacturing company, specialized in metal stamping, form rolling and pipe extrusion. With more than 20 years of manufactring experience, we are able
Shur-Shot X-Proof Hydrogen Fluoride Alarm Operations Manual
Shur-Shot X-Proof Hydrogen Fluoride Alarm Operations Manual P/N 1000006053 Rev E $7%$QDO\WLFV// //& 733 Dairy Rd. Parkton, Md. 21120 www.atbanalytics.com (410) 733-6365 Table of Contents Chapter 1: Getting
Thermocouple for Flue Gas Temperature Measurements,
Electrical Temperature Measurement Thermocouples for Flue Gas Temperature Measurements Model TC81 with Thermowell Model TW81 WIKA Data Sheet TE 65.81 Applications Blast furnaces, air heaters Red-heat and
EMI Conductive Elastomer CSM Series
TDS EMI Shielding Material V.A. EMI Conductive Elastomer CSM Series Product Technical Datasheet General Introduction The electrically conductive elastomers are composed by adding conductive particles into
Mar11 Rev C
Product Specification 108-1393 11Mar11 Rev C Connector, FPC, 1 mm 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the TE 1 mm FPC connector. This connector
XMP i. Precision Pressure Transmitter for the Process Industry with HART -Communication. Stainless Steel Sensor
Precision Pressure Transmitter for the Process Industry with HART -Communication Stainless Steel Sensor accuracy according to IEC 0770: 0. % FSO Nominal pressure from 0... 00 mbar up to 0... 00 bar Output
FOR EARTH GROUNDING, THINK OF DUBUIS EARTH BOND! EArTH BONDING SYSTEM english version COST REDUCTION EASY TO USE RELIABILITY PERFORMANCE
FOR EARTH GROUNDING, THINK OF DUBUIS EARTH BOND! EArTH BONDING SYSTEM english version COST REDUCTION EASY TO USE RELIABILITY PERFORMANCE THE EArTH BOND SUMMARY A real ADVANTAGE! PrINCIPLE & PrOCE OF THE
THERMOFIT ADHESIVE S Flex Fluid Resistant, High Temperature, One Part-Flexible Epoxy
TE Connectivity 30 Constitution Drive Menlo Park, CA 9402 USA SPECIFICATION THIS ISSUE: DATE: REPLACES: RT-1014 ISSUE 4 April 19, 2016 Issue 3 1. SCOPE THERMOFIT ADHESIVE S-12-04 Flex Fluid Resistant,
Spira s Connector-Seal Gaskets
s Connector-Seal Gaskets offers the best Connector-Seal gaskets on the market, providing an excellent, durable and reusable EMI and/or Environmental seal in flange-mounted connectors for the life of a
XMP i. Precision Pressure Transmitter for the Process Industry with HART -Communication. Stainless Steel Sensor
Precision Pressure Transmitter for the Process Industry with HART -Communication Stainless Steel Sensor accuracy according to IEC 0770: 0. % FSO Nominal pressure from 0... 400 mbar up to 0... 00 bar Output
Low-profile, 11U high cabinets hold networking equipment, servers, and phone equipment.
RM140A-R3 RM140A-M-R3 RM145A-R3 RM145A-M-R3 Small Office/Home Office (SOHO) Cabinets Low-profile, 11U high cabinets hold networking equipment, servers, and phone equipment. Fit under most desktops in the
SPECIAL SPECIFICATION 4900 Sacrificial Cathodic Protection Pile Jacket
1993 Specifications CSJ 0331-04-045 SPECIAL SPECIFICATION 4900 Sacrificial Cathodic Protection Pile Jacket 1. Description. This Item shall govern for the furnishing, installing and energizing a sacrificial
INSTALLATION AND MAINTENANCE GUIDE SECTION 3 HANDRAIL DECK LIGHTS
INSTALLATION AND MAINTENANCE GUIDE SECTION 3 HANDRAIL DECK LIGHTS CONTENTS DECKING AND DRYSPACE RAILING SYSTEMS HANDRAIL DECK LIGHTS Installing TimberTech 04 Tools Required 04 Read Before You Start 05
NUCLEAR. Nuclear Reactor Pressure Vessel Seals
NUCLEAR Nuclear Reactor Pressure Vessel Seals SEALING CONCEPT Technetics Group is the world s leading manufacturer of Nuclear Reactor Pressure Vessel (RPV) Closure Head Seals. In addition, Technetics Group
LMR-400. LMR -400 Flexible Low Loss Communications Coax TIMES MICROWAVE SYSTEMS
LMR-400 LMR -400 Flexible Low Loss Communications Coax Ideal for Drop-in replacement for RG-8/9913 Air-Dielectric type Cable Jumper Assemblies in Wireless Communications Systems Short Antenna Feeder runs
Circular Connectors Conforming to JIS C 5432
Circular Connectors Conforming to JIS C 5432 JR Series Features 1. These round connectors conform to JIS C 5432 "Circular connectors for electric appliances." Product Specifications Ratings Ratings Ratings
INDUSTRIAL TEMPERATURE SENSORS
Temperature s INDUSTRIAL TEMPERATURE SENSORS Temperature s APPLIED SENSOR TECHNOLOGIES A DIVISION OF UNITED ELECTRIC CONTROLS T E M P S E N S O R - B - 0 2 Temperature s Temperature s index Subject Page
NORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017
SECTION 26 0526 - GROUNDING AND BONDING FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions
EXH HEAT-SINK ALUMINIUM ENCLOSURE
EXH HEAT-SINK ALUMINIUM ENCLOSURE EXH series is an aluminium enclosure with a highly efficient heat-sink top cover. Suitable to be used as fanless PC, power amplifier, and power supply box where heat dissipation
Substrate Twin (Pair) Cable Swing-Lock Connector for Low-Profile Power Source
Substrate Twin (Pair) Cable Swing-Lock Connector for Low-Profile Power Source DF57 Series Swing-Lock Structure explanatory drawing Before mating Lock portion Features 1.Reinforced lock structure with swing
DIN 3015 CLAMPS B1-1 PN# / / ACC
DIN 0 CLAMPS DIN 0 Clamps HYDAC manufactures a complete line of hose, tube, and pipe mounting components according to the DIN 0 standard. HYDAC clamps assure a simple, reliable dampening support for lines
The Industry Source for High-Quality Electronic Products & Assemblies
OVER 300 VARIETIES STOCKED ALLIGATOR CLIPS CROCODILE CLIPS PLIER CLIPS SPECIALTY CLIPS ACCESSORIES PLUGS JACKS A DESCO CORPORATION COMPANY, SINCE 2011 The Industry Source for High-Quality Electronic Products
BUSWAY LOW VOLTAGE (POW-R-WAY III) SECTION SECTION 16466
BUSWAY LOW VOLTAGE (POW-R-WAY III) PART 1 GENERAL 1.01 1.02 SCOPE The Contractor shall furnish and install the busway system including all necessary fittings, hangers and accessories as specified herein
RN Optical Termination Panel (RN OTP)
RN Optical Termination Panel (RN OTP) General The RN Optical Termination Panel(RN OTP) is specifically designed to house optical splitters while also catering for fiber termination in a single enclosure.
SPECIFICATION RW-2514 Document Number NBC MARKER SYSTEM (Ladder Form) NBC-SCE
SPECIFICATION: RW 2514 THIS ISSUE: ISSUE 2 DATE: February 2014 SPECIFICATION RW-2514 Document Number 108-121017 NBC MARKER SYSTEM (Ladder Form) NBC-SCE 1. SCOPE NBC-SCE Markers are designed for use where
Bore Code 1 1/8" mm 121
/8" (2) Bore Model Number Model Number Code Leave blank if none desired D 2 X MR Metric M See pages.7,.3 &.34 Bore Code /8" 2 28.5mm 2 T Series HOW TO ORDER Sound limiters: Rod end -LF Includes PTFE. Under
SMPM Female Cabled Connectors
Product Specification 108-2326 28 APR 14 Rev B SMPM Female Cabled Connectors 1. SCOPE This specification covers performance, tests and quality requirements for the TE Connectivity (TE) Subminiature P Miniature