Circular Connectors Conforming to JIS C 5432
|
|
|
- Aubrey Barnett
- 6 years ago
- Views:
Transcription
1 Circular Connectors Conforming to JIS C 5432 JR Series Features 1. These round connectors conform to JIS C 5432 "Circular connectors for electric appliances." Product Specifications Ratings Ratings Ratings Rated current Rated voltage Shell size Number of s Rated current A 5 5A 7 A, 14 5A A 5A (Crimp type : 3A) 26 5A (Contact numbers A and B only : A) 4 30A 5, A 24 5A (Crimp type : 3A) Shell size Number of s Rated voltage 13 3, 5 7,, 14 AC250, DC350V 21,, , 5, 24 Operating temperature range -25 to +85ç Storage temperature range - to +60ç Items Specifi cations Conditions 1. Contac resistance 2. Insulation resistance 5mø max. JR 21- crimping type : mø max. JR crimping type : mø max. 1,000Mø min. JR 25-4 and 5 s :,000mø min. 3. Withstanding voltage No fl ashover or dielectric breakdown. 4. Vibration resistance No electrical discontinuity for µs or greater Measured at DC 1A Measured at DC 500V AC00V, DC1400V AC250, DC350V AC 1,000V for 1 minute JR 25-4, 5 s: AC 3,000V for 1 minute to 55Hz/cycle, amplitude : 0.75mm, 3 directions, 2 hours each 5. Shock resistance No electrical discontinuity for µs or greater Acceleration : 490m/s 2, duration : 11ms, 6 axis directions, 3 cycles each 6. Mating cycles Contact resistance : mø max. 500 times 7. Temperature cycle 8. Moisture resistance Insulation resistance : 1,000Mø min. JR 25-4 and 5 s : Insulation resistance :,000Mø min. Insulation resistance (when dry) 0Mø min. 5,000Mø min. : JR 25-4, 5 s -40ç : 30 minutes Normal temperature : to 15 minutes 0ç : 30 minutes Normal temperature : to 15 minutes, left for 5 cycles Temperature : 40ç, relative humidity: 90 to 95%, left for 96 hours Materials / Finish Part Material Finish Remarks Shell Aluminum alloy Nickel plating Insulator Phenol resin PPS resin UL94V-0 Contact Copper alloy Silver plating t 1
2 Product Number Structure Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders. JR P A - S C (**) qmodel name : JR Series wshell size : The shell size is the outer shell diameter of the mating end of the plug. eshell type P : Threaded lock plug J : Threaded lock jack R : Threaded lock receptacle BP : Bayonet-lock plug RC : Threaded lock receptacle cap BR : Bayonet-lock receptacle rshell variation : Letters such as A, B, C, etc. indicate variations in the shell. Solder Type Threaded lock plug JR25PH-4S tnumber of s ycontact form P : Male S : Female ucontact termination method: None : Solder termination C : Crimp termination iother specifi cations : A two-digit number is added to indicate other specifi cations. Part No. HRS No. No. of s ØA B ØC ØD E JIS No. JR13PK-3P(71) CNR01SPM M JR13PK-5P(71) CNR01SPM JRPK-7P(71) CNR01SPM M JRPK-P(71) CNR01SPM00 JR21PK-P(71) CNR01SPM M JR21PK-P(71) CNR01SPM02 JR25PK-P(71) CNR01SPM0250 JR25PK-24P(71) CNR01SPM M JR25PH-4P JR25PH-5P JR13PK-3S(71) CNR01SPF M JR13PK-5S(71) CNR01SPF JRPK-7S(71) CNR01SPF M JRPK-S(71) CNR01SPF00 JR21PK-S(71) CNR01SPF M JR21PK-S(71) CNR01SPF02 JR25PK-S(71) CNR01SPF0250 JR25PK-24S(71) M CNR01SPF JR25PH-4S Ø Ø Ø 2
3 Threaded lock receptacle 2.5 Ø JR25RH-4P 4Ø3.3 Part No. HRS No. No. of s ØA B C D E JIS No. JR13RK-3P CNR01SRM M JR13RK-5P CNR01SRM JRRK-7P CNR01SRM M JRRK-P CNR01SRM00 JR21RK-P CNR01SRM M JR21RK-P CNR01SRM02 JR25RK-P CNR01SRM0250 JR25RK-24P M CNR01SRM JR25RH-4P JR13RK-3S CNR01SRF M JR13RK-5S CNR01SRF JRRK-7S CNR01SRF M JRRK-S CNR01SRF00 JR21RK-S CNR01SRF M JR21RK-S CNR01SRF02 JR25RK-S CNR01SRF0250 JR25RK-24S CNR01SRF M JR25RH-4S JR25RH-5S Threaded lock jack Ø Ø JR25JK-24P Part No. HRS No. No. of s ØA B C ØD JR13JK-3P M JR13JK-5P JRJK-7P M JRJK-P JR21JK-P M JR21JK-P JR25JK-P M JR25JK-24P JR13JK-3S M JR13JK-5S JRJK-7S M JRJK-S JR21JK-S M JR21JK-S JR25JK-24S M
4 Ø Ø Ø Crimp Type Threaded lock plug JR21PK-PC(71) Part No. HRS No. No. of s ØA B ØC ØD E Remarks JR21PK-PC(71) Contact Ø1.6 JR21PK-SC(71) M JR21PK-PC(71) JR21PK-SC(71) Contact Ø1 JR25PK-24PC(71) M JR25PK-24SC(71) Threaded lock receptacle JR21RK-SC Ø Part No. HRS No. No. of s ØA B C D E Remarks JR21RK-SC Contact Ø1.6 JR21RK-PC M JR21RK-SC JR25RK-24SC M Contact Ø1 Threaded lock receptacle cap Ø3.3 Ø6 4Ø Ø 4 Part No. HRS No. A ØB C JIS No. JRC13RC(71) M CNR01RC013 JRCRC(71) M CNR01RC0 JRC21RC(71) M CNR01RC021 JRC25RC(71) M CNR01RC025 4
5 Solder Type Bayonet - lock plug Ø Ø Ø JRCBP-14P(71) Part No. HRS No. No. of s ØA ØB C ØD Remarks JRCBP-14P(71) JRC21BPA-26P(71) JRCBP-14S(71) JRC21BP-26S(71) Bayonet - lock receptacle JRCBR-14S(71) 2.5 Ø ØA 4Ø3.3 Part No. HRS No. No. of s ØA ØB C D E Remarks JRCBR-14P(71) JRC21BR-26P(71) JRCBR-14S(71) JRC21BRA-26S
6 Crimp Contacts Contact diameter Ø1.0mm Male Type Part No. HRS No. B C Applicable wire C B Loose Reel JRC-PC to 24 AWG JRC-PC to 28 AWG JRC-PC to 24 AWG JRC-PC to 28 AWG Female Contact diameter Ø1.6mm Male Female C B C C Type Part No. HRS No. B C Applicable wire Loose B Type Part No. HRS No. B C Applicable wire Loose JRC-PC to 20 AWG Reel JRC-PC B JRC-SC to 24 AWG JRC-SC to 28 AWG Reel JRC-SC to 24 AWG JRC-SC to 28 AWG Note : Loose in pack of 0 pcs. Reel contains 8,000 pcs. Type Part No. HRS No. B C Applicable wire Loose JRC-SC to 20 AWG Reel JRC-SC Note : Loose in pack of 0 pcs. Reel contains 5,000 pcs. 6
7 Applicable Tools Contact dia. Type Item Part No. HRS No. Applicable terminal Applicable wire Manual Manual crimping tool HT802/RM HT802/RM JRC-PC2-112 JRC-SC2-112 JRC-PC2-122 JRC-SC to 24 AWG 24 to 28 AWG Ø1 Ø1.6 Hand Tool Crimp Extraction Tool Automatic crimping press CM-5C Automatic JRC-PC2-212 AP5-JRC to 24 AWG JRC-SC2-212 Applicator JRC-PC2-222 AP5-JRC to 28 AWG JRC-SC2-222 Extraction tool RM-TP Manual Automatic Manual crimping tool Automatic crimping press JRC-TC JRC-TC JRC-PC-112 JRC-SC-112 JRC-PC-112 JRC-SC-112 AWG 18 to 20 AWG CM-5C Applicator AP5-JRC JRC-PC-212 JRC-SC-212 to 20 AWG Extraction tool JRC-TP (For Contact Diameter Ø1.0mm) (For Contact Diameter Ø1.0mm) (For Contact Diameter Ø1.6mm) (For Contact Diameter Ø1.6mm) Automatic Crimping Machine CM-5C Precautions This product series uses silver plated s. Silver reacts easily to exposure to sulfur gas so the below conditions may cause tarnishing. Dusty environments Area with a high concentration area of gases such as sulfur dioxide gas, hydrogen sulfide gas, nitrogen dioxide gas and so on. Example; In close proximity to factory exhaust, automotive emissions, etc. Close to heaters, or in other areas marked by extreme temperature differences or high humidity. Close to rubber products includes rubber adhesives. The Electrical connection is not affected by tarnishing on a silver surface due to the wiping effect of the pins. Storage Packing state; Packed in original packing or equivalent container Temperature - to +60 Humidity 85% Max (It is recommended that the product be stored in an area of normal level of temperature and humidity, and free of any temperature fluctuation) Please use this products within 6 months of delivery. (After 6 month, please check the solderbility before use) Storage means long-term storage of the unused products in sealed packaging, prior to assembly to PCB. 7
8 Powered by TCPDF ( Contact Position Arrangement Shell size 13 No. of s 3 5 Withstanding voltage AC00V a minute Current rating A 5A Insulation resistance 00Mø MIN. Contact resistance 5mø MAX. Solderpot inner diameter 1.7mm dia. 1.1mm dia. Shell size No. of s 7 14 Withstanding voltage AC00V a minute Current rating A 5A Insulation resistance 00Mø MIN. Contact resistance 5mø MAX. Solderpot inner diameter 1.7mm dia. 1.1mm dia. Shell size 21 No. of s 26 Withstanding voltage AC00V a minute Current rating A 5A (crimp type 3A) 5A A (only A, B) Insulation resistance 00Mø MIN. Contact resistance 5mø MAX. 5mø MAX. (crimp type mø) 5mø MAX. Solderpot inner diameter 1.7mm dia. 1.1mm dia. 1.7mm dia. (only A, B) Shell size 25 No. of s Withstanding voltage AC3000V a minute AC00V a minute Current rating 30A A 5A (crimp type 3A) Insulation resistance,000mø MIN. 00Mø MIN. Contact resistance 5mø MAX. 5mø MAX. (crimp type mø) Solderpot inner diameter 3.4mm dia. 1.7mm dia. 1.1mm dia. Remarks: 1. Viewed from mating face. 2. The withstand voltage is the test value ,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi ,JAPAN TEL: Fax: The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. The contents of this catalog are current as of date of 12/2017. Contents are subject to change without notice for the purpose of improvements.
Multi-contact Compact Circular Connectors
Multi-contact Compact Circular Connectors RM Series Jun..06 Copyright 06 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. Product Specifications Ratings Rated current Rated voltage [RM5] 0 ( and 4 contacts)
2 2.2mm Pitch, Wire-to-Wire Connectors for Small Spaces
2 2.2mm Pitch, Wire-to-Wire Connectors for Small Spaces DF62 Series / DF62W Series Features 1. The slim, sleek design and smooth contour combine to complete connections in tight spaces. These connectors
4.5 mm pitch, Horizontal Mating 2-Piece System Connectors
NW 4.5 mm pitch, Horizontal Mating 2-Piece System Connectors D64 Series (UL pending) The floating structure of the BTB connection provides increased flexibility by absorbing the movement of the PCB s.
0.35mm Pitch 0.8mm Height Hybrid Power/Signal Connectors for Board-to-Board and FPC-to-Board
NEW.35mm Pitch.8mm Height Hybrid Power/Signal Connectors for Board-to-Board and FPC-to-Board BM24 Series Conventional type (P=.35 mm, 2 contacts) Features 1 Rated current : 5A The compact BM24 Series features
Features. FX22 Series
FX22 Series Floating range: ±.6mm Z X Features 1. The floating design Structure provides for an mis-alignment of ±.6mm in both X and Z directions in.5mm pitch product. (Fig.1) 2. A double-beam contact
Features. FX22 Series NEW
NEW FX22 Series Floating range: ±.6mm Z X Fig.1 Features 1. The floating design Structure provides for an mis-alignment of ±.6mm in both X and Z directions in.5mm pitch product. (Fig.1) 2. A double-beam
Floating Stacking 0.5mm Pitch Board to Board Connector
Floating Stacking 0.5mm Pitch Board to Board Connector FX20 Series X direction Floating range : 0.6 to 0.8mm Y direction Floating range : 0.6mm Features 1. 0.5mm pitch 2. Connection type: Stacking 3. Number
Standard Connectors. MD Series NEW
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
Circular Connectors for Audio Equipment
Circular Connectors for Audio Equipment HA Series Apr..07 Copyright 07 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Product Specifications Ratings Features Rated voltage Rated current 5A A (PCB dip type)
Substrate Twin (Pair) Cable Swing-Lock Connector for Low-Profile Power Source
Substrate Twin (Pair) Cable Swing-Lock Connector for Low-Profile Power Source DF57 Series Swing-Lock Structure explanatory drawing Before mating Lock portion Features 1.Reinforced lock structure with swing
Card Edge Type Ribbon Cable Connectors
Card Edge Type Ribbon Cable Connectors HIF5 Series Product Specifications Rating 1. Insulation Resistance 1000M min. 2. Withstanding voltage No flashover or insulation breakdown. 3. Contact Resistance
DTS-HC High-Current Connectors
ROBUST DTS-HC High-Current Connectors Signal and power contacts in same housing Up to four 150 A or one 300 A high-current contacts Threaded coupling with self-locking mechanism for anti-vibration 100%
3.96 mm Pitch Miniature Connectors for Internal Power Supplies (UL,C-UL and TÜV Listed)
ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
Ribbon Cable connector Compliant with MIL Standard
Ribbon Cable connector Compliant with MIL Standard HIF3B Series Features 1. Product Compliant with MIL Standard HIF3B series has been developed as a product compliant with MIL standard, and used for wide
Card Edge Type Ribbon Cable Connector
Card Edge Type Ribbon Cable Connector HIF5 Series pplications Computers, FDD, various kinds of electronic equipment. Features 1. Product Variation The area to install the connector body is classified into
High Speed, Matched-Impedance, Parallel Board-to-board Connector System
High Speed, Matched-Impedance, Parallel Board-to-board Connector System IT Series Receptacle (2 required) IT Series Outline High-speed matched-impedance parallel board-to-board connector designed for applications
solutions HIGH DENSITY CONNECTORS Custom designed Contact arrangements
Custom designed HIGH DENSITY CONNECTORS NANO-D PITCH As the need for increased miniaturisation is becoming ever greater, AXON has developed an ultra-high density solution within the existing micro connector
38999 SERIES III HIGH POWER CONNECTOR RANGE. Interconnect Solutions Worldwide
38999 III HIGH POWER CONNECTOR RANGE 38999 III HIGH POWER CONNECTOR The Polamco 38999 High Power Connector range offers a simple and effective way of terminating power cables in a harsh environment military
MAY-16 REV B2
Product Specification 108-20025 06-MAY-16 REV B2 The product described in this document has not been fully tested to ensure conformance to the requirements outlined below. Therefore, TE Connectivity (TE)
Amphenol Fast Connector
Amphenol The Winning Connection Amphenol Fast Connector For all your Autosport connector requirements Fast Connector Series For Autosport Applications Contact Arrangement Amphenol have developed the FAST
High Reliability Hyperboloid Contacts
High Reliability Hyperboloid Contacts ICO SERIES TM Technology Company, Inc. integramate Hyperboloid Contacts QA Technology integramate TM Contacts are high quality, high reliability hyperboloid TM contacts
SMB. Aliner Industries, Inc. No. 32, Lane 387, Min-an Rd., Sinjhuang City, Taipei County 24256, Taiwan
SMB Aliner Industries, Inc. No. 32, Lane 387, Min-an Rd., Sinjhuang City, Taipei County 24256, Taiwan Tel : +886-2-2205-5791 E-mail : sales@aliner.com.tw Fax : +886-2-2203-8052 / 2205-5628 http://www.aliner.com.tw
10 + Gbps 0.5mm pitch Stacking Connectors
1 + Gbps.5mm pitch Stacking onnectors XG1 Series 1.3 1.1 Mechanical Features.5mm Pitch / ouble-row SMT Stacking Height : 15~23mm ( 2 pieces ) 25~44mm ( 3 pieces ) Number of ontacts : / / 14 / 1 / 156 /
Amphenol Amphenol Taiwan Corporation Sheet 1 of 8
Amphenol Amphenol Taiwan Corporation Sheet 1 of 8 Title: Part Number: Description: Micro Power Plus Product Specification G88MP Series 3.0 mm Pitch, PCB Mount / Cable Crimping Type Revisions Control Rev.
0.5mm Pitch SMT Board to Board Connector
.5mm Pitch SMT oard to oard onnector DF16 Series orrespond to Automatic Mounting The vacuum pick-up area is prepared for automatic mounting machine. Features 1. Miniaturizing and Slimming In addition to.5mm
0.4/0.5 mm Pitch, 1.5 mm Height, High Speed Transmission (5 + Gbps) FPC Connector
0.4/0.5 mm Pitch, 1.5 mm Height, High Speed Transmission (5 + Gbps) FPC Connector FH55/FH55M Series Dimensions: 40 pos Features 1. High-Speed Transmission(5 + Gbps) FPC Connector Capable of transmitting
SMA SERIES COAXIAL CONNECTORS
General R Reference Standards MIL-PRF-3912 MIL-DTL-83517 MIL-STD-348 (Interface) IEC 6169-15 CECC 12211 Materials Bodies and nuts Contacts Insulators Gaskets Crimp ferrules Non-magnetic stainless steel
Low Profile 0.5mm Pitch Connectors For FPC
Low Profile 0.5mm Pitch Connectors For FPC FH17 Series FH17 (on-board type) flip-lock mechanism Features 1. Low profile 0.5mm pitch FPC connectors As products become lighter/thinner/shorter/smaller, requests
Product Specification JUL 14 Rev. A1
Industrial SCSI Connector 1. Scope 1.1 Contents This specification covers the requirements for product performance, test methods and quality assurance provisions of SCSI Connector. 2. Applicable Documents
Amphenol PCD Shenzhen. PHEV: BSM series Datasheet
Amphenol PCD Shenzhen PHEV: BSM series Datasheet Battery Swapping Module Quick mating Deviation self- correction Collision prevention High durability PRESENTATION BSM 5A Female Side: BSM-5A-F-10S Male
1.25mm Pitch Miniature Crimping Connector
1.mm Pitch Miniature Crimping Connector DF1 Series Type Mounting Type Mounting Height Straight Type DIP SMT.mm.mm Right Angle Type DIP SMT.mm Features 1. Miniature Size Designed in the low profile at mounting
Amphenol Amphenol Taiwan Corporation Sheet 1 of 7
Amphenol Amphenol Taiwan Corporation Sheet 1 of 7 Title: Part Number: Description: Micro SD Card Connectors Product Specification GTFP08 SERIES Micro SD Card Connectors push-push type Revisions Control
Amphenol Amphenol Taiwan Corporation Sheet 1 of 9
Amphenol Amphenol Taiwan Corporation Sheet 1 of 9 Title: Part Number: Description: Micro Power Wafer Product Specification G881A / G881B / G881MA / G881H / G881C 3.0 mm Pitch, PCB Mount / SMT Type / CRIMPING
CVB-EX Mil-C-5015 reverse bayonet ATEX Connectors
CVB-EX Mil-C-5015 reverse bayonet ATEX Connectors Standards Certification 94/9/EC (ATEX) Directive According to European Standards EN 60079-0 EN 60079-1 EN 61241-0 EN 61241-1 Protection degeree IP66/67
ACT. Summary. 1 Introduction. 2 Synoptic. 3 Technical characteristics. 4 Part-numbering system. 5 Arrangements. 6 Receptacles. 7 Plug / Panel seal
Summary 1 Introduction 2 Synoptic 3 Technical characteristics 4 Part-numbering system 5 Arrangements 6 Receptacles 7 Plug / Panel seal 8 Mating and unmating dimensions 9 Mounting cutouts 10-11 Contacts
Cannon Trident Connector System
These are low installed cost connectors rated for up to 13 A and 250 V ac. They are typically used for circuit board and internal wiring applications. Snap Together connectors facilitate easy assembly
SSL Series 1.2 IP X8 waterproof solution. Product Data Sheet. REV. 0, 2014 August
SSL Series 1.2 IP X8 waterproof solution Product Data Sheet REV. 0, 2014 August General Specification Number of Positions Current Rating Wire Information Voltage Rating Dielectric Withstand Voltage Durability
NARROW PITCH (0.4mm) CONNECTORS P4S SERIES
FOR BOARD-TO-BOARD AND BOARD-TO-FPC CONNECTION NARROW PITCH (0.4mm) CONNECTORS P4S SERIES Compliance with RoHS Directive http://www.mew.co.jp/ac/e/ FEATURES 1. Space saving Compared to the currently sold
Feb12 Rev D
Product Specification AMPSEAL* Connectors 108-1329 01Feb12 Rev D 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for AMPSEAL* connectors. 1.2. Qualification
NARROW PITCH (0.4mm) CONNECTORS P4S SERIES
FOR BOARD-TO-BOARD AND BOARD-TO-FPC CONNECTION AXT3, 4 NARROW PITCH (0.4mm) CONNECTORS P4S SERIES NEW 2. Strong resistance to adverse environments! Utilizes construction for high contact reliability. 1)
OCT 16 Rev A
Product Specification 108-151041 10 OCT 16 Rev A Jiffy Splice System 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the TE Connectivity (TE) Jiffy Splice
Mar11 Rev A
Product Specification 108-1472 11Mar11 Rev A Connector, Short Point Receptacle Contact 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for TE Connectivity (TE)
Photo. JBX Push Pull Sealed IP68 (Mated) The Solution for both Outdoor and Indoor waterproof applications. Secure for Outdoor applications.
Photo Environmentally Integrated Backshell Sealed Fire JBX proof onnector The Solution for both Outdoor and Indoor waterproof applications Secure for Outdoor applications Waterproof, IP68 (Mated) Reliable
NARROW PITCH (0.6mm) CONNECTORS P6 SERIES P6S
NARROW-PITCH CONNECTORS FOR BOAR-TO-BOAR CONNECTION NARROW PITCH (0.6mm) CONNECTORS P6 SERIES P6S Compliance with RoHS irective FEATURES 1. Bellows-type contacts Bellows-type contacts resist mating stress
Qualification Test Report VAL-U-LOK* Connectors
Qualification Test Report VAL-U-LOK* Connectors 501-534 09Apr09 Rev A 1. INTRODUCTION 1.1. Purpose 1.2. Scope Testing was performed on VAL-U-LOK* Connectors to determine their conformance to the requirements
The UK s Leading Supplier LUMINUS
The UK s Leading Supplier LUMINUS GUIDE 2018 Description: Amphenol LTD is excited to become the UK s leading supplier of the Luminus series. The product was originally designed by our sister division Amphenol
HS h e n EU omplia t 2002 / 9 5 / C
9 57-30500 0 0 E U 2 C A mp hen 2/ 5 / E omplia Ro HS ol C nt hen z n She 57-30360 DE-09P & DE-09S Standards: UL File: E119881 Connectors according to MIL C24308 SPECIFICATIONS : MATERIALS AND Shells Steel
Amphenol RF- SMA Connector Series
Page 1 of 8 enter part number Products 7/16 1.0/2.3 1.6/5.6 AMC BNC / RP-BNC C FAKRA SMB FME HN MCX Mini-UHF Mini 75 Ohm SMB MMCX Precision (APC) QDS QMA QWS SC SlimLine BNC SMA / RP-SMA SMB SMC SMP TNC
CONNECTORS, HIGH RELIABILITY, SPACE USE, GENERAL SPECIFICATION FOR
Registration No. 985 Superseding NASDA-QTS-2060B Cancelled CONNECTORS, HIGH RELIABILITY, SPACE USE, GENERAL SPECIFICATION FOR JAXA JAPAN AEROSPACE EXPLORATION AGENCY This specification was originally written
Conforming to IEC Standard The Next-Generation Ethernet Connector for Industrial Equipment
Conforming to IEC Standard The Next-Generation Ethernet Connector for Industrial Equipment IX Series Contribution to size reduction Compact size 75% reduced size compared to RJ-45 Overview Multi-purpose
Conforming to IEC Standard The Next-Generation Ethernet Connector for Industrial Equipment
Conforming to IEC Standard The Next-Generation Ethernet Connector for Industrial Equipment IX Series Contribution to size reduction Compact size 75% reduced size compared to RJ-45 Overview Multi-purpose
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. 1.0 SCOPE This Product Specification covers the 3.96 mm (.156 inch) centerline
Hirose Korea Board To Board Connector
Hirose Korea Board To Board Connector KN13-Series 1. Characteristic of Products ------------------------------------------------- 2 page 2.Specifications & Formation of Products ---------------------------------
Contacts for Full Duplex Ethernet Link
8D Series Twinax & Quadrax Contacts Contacts for Full Duplex Ethernet Link Twinax and Quadrax contacts with robust MIL-DTL-38999 compliant screw coupling system for networks and high vibration environments.
Series 805 Mighty Mouse Triple-Start ACME Thread Receptacle
Series 0 Mighty Mouse Triple-Start ACME Thread Receptacle 0-00 and 0-00 Ordering Information Series 0 Three Shell Mounting Options: Jam nut with O-ring for rear panel mounting, square flange for front
Hirose Korea Board To Board Connector
Hirose Korea Board To Board Connector BM30-Series 1. Characteristic of Products ------------------------------------------------- 2 page 2.Specifications & Formation of Products --------------------------------
0.5mm Pitch SMT Board to Board Connector
The product information in this catalog is for reference only. Please request the ngineering rawing for the most current and accurate design information. ll non- products have been discontinued, or will
Amphenol Amphenol Taiwan Corporation Sheet 1 of 9
Amphenol Amphenol Taiwan Corporation Sheet 1 of 9 Title: Part Number: Description: USB3.1 Connector Product Specification GSB4X series A / B type, Receptacle, Thru hole, PCB mount Revisions Control Rev.
PRODUCT SPECIFICATION
1 of 23 B 1.0 GENERAL Scope This specification covers the insulation piercing Quickie Backplane Connector System designed for Backplane-to-flat cable (round conductor) interconnection in low power applications.
Save Labor, Reduce Weight and Improve EMI Shielding with Glenair s Micro-D Shielded Cable Assemblies
Single-Ended or Double-Ended These easy-to-order cable assemblies eliminate the need for expensive assembly labor. 00% tested and ready for use. Now With Twisted Pairs No need to create a procurement specification
PRODUCT SPECIFICATION
PRODUCT SPECIFICATION 108-25020 27-FEB-18 REV A INTERCONNECTION SYSTEM, AMPMODU* MOD IV, WIRE TO BOARD, STANDARD PRESSURE GOLD CONTACTS 1. SCOPE 1.1. Content This specification covers performance, tests
A new lightweight version!
8STA A new lightweight version! In-line receptacle Benefits Weight saving Elimination of knurl ost Saving for end customer Elimination of secondary machining process for customers who modify standard flange
Precision SMA. Key Features. Military grade. Rugged stainless steel design. Intermateable with all SMAs to Mil-C Frequency range DC to 18 GHz
Key Features Military grade Rugged stainless steel design ntermateable with all SMAs to Mil-C-39012 Frequency range DC to 18 GHz Cannon s precision SMA connectors feature the ML-C-39012 Series SMA interface
Round ACOM 230V. AC Operating Module. Samsung AC Operating Module is reasonable solution with better uniformity and high reliability
Product D ata Sheet Rev_1.0 2017.04.20 1# AC Operating Module Round ACOM 230V Samsung AC Operating Module is reasonable solution with better uniformity and high reliability Features & Benefits No dark
B.0. Multipin Connector. Introduction
B.0 Multipin Connector Introduction Description CeramTec s multipin connector category of products describes hermetic feedthroughs of two or more conducting pins that accept plugs on the air side. Some
t This publication is issued to provide outline information only and unless specifically agreed to the contrary by WEALD ELECTRONICS LTD. in writing, is not to form part of any order or contract or be
JN FPC P CONNECTOR MANUFACTURER SIGNATURE
DOC. NO.: - ISSUE DATE: 20 / / CUSTOMER: PART NAME: PART NO.: FPC P CONNECTOR 1 APP. DATE: MANUFACTURER SIGNATURE P-TWO INDUSTRIES INC. NO. 9, SHIN HWA RD, KWEI SHAN IND. PARK TAOYUAN, 330 TAIWAN, R.O.C.
Cobra. Innovative shielded low profile right angle connector plug and backshell assemblies reduce MIGHTY MOUSE
MIGHTY MOUSE Cobra The Ultra-Low Profile EMI/RFI Plug and ackshell Assembly Innovative shielded low profile right angle connector plug and backshell assemblies reduce clearance requirements without compromising
Data Bus Connector and Terminator Requirements Document DB-1001-A. Revision C
Data Bus Connector and Terminator Requirements Document DB-1001-A Revision C 2507 W. Geneva Dr. Tempe, Arizona 85282 Phone [602] 231-8616 FAX [602] 273-9135 www.phxlogistics.com TABLE OF CONTENTS 1. Introduction
PRODUCT SPECIFICATION
1 of 21 B 1.0 OBJECTIVE This specification defines the performance, test, quality and reliability requirements of the slotted and vertical staking header connectors. 2.0 SCOPE This specification covers
3Pin and Socket Connectors
AMPLIMITE Connectors Introduction Product Facts Military qualified connectors conform to the latest amendments of MIL-DTL-208 Industrial versions available that use the same manufacturing process of MIL-C-
8D Series MIL-DTL Series III
8D Series MIL-DTL-38999 Series III 8D Series - MIL-DTL-38999 Series III Contents Overview Common Section MIL-DTL-38999: A universal product platform... 04 8D Series - Presentation... 05 Product overview...
Sn-Pb plating or Tin plating
2/14 Unit mm L a a Code letter Dimension L 2..2 W 1.25.2 W t a b.4.1.4.2.4.2 t b b Fig.1 Construction and dimensions NOTE : Resistive element Electrode Protective coat Substrate Nichrome alloy thin film
SGP-3 Series FC HOUSING for PC degree variable tuning -
DOCUMENT NUMBER S05-H032-02E SGP-3 Series FC HOUSING for PC - 360 degree variable tuning - TECHNICAL SPECIFICATIONS Fiber Optic Products Division 296-1, MATSUHIDAI, MATSUDO-SHI, CHIBA, 270-2214 JAPAN.
.050" 4 thru 25 Contacts
.050" 4 thru 25 Contacts MM-11... MM-12... MM-12, MK-16, MK-18 receptacles MM-11, MK-15, MK-17 plugs PAGE 1 OF 4 PAGES BODY CONTACTS OPTIONS SERIES SIZE HARDWARE MM.050" Rugged Metal I/O Connector (MM
Datasheet RS Pro RS Series Axial Carbon Resistor 1kΩ ±5% 2W ppm/ C RS Stock No:
Datasheet RS Pro RS Series Axial Carbon Resistor 1kΩ ±5% 2W -500 +350ppm/ C RS Stock No: 707-8861 Product Details RS Pro axial carbon resistor with ±5% tolerance, provides 1 kω resistance and is power
SP3S-AQ2-01 AIR QUALITY SENSOR S March, 2004
SP3S-AQ2-01 SPECIFICATIONS MODEL: TYPE: SPECIFICATION No. DATE OF ISSUE SPECIFICATIONS FOR: SP3S-AQ2-01 AIR QUALITY SENSOR S-0403-03 18 March, 2004 Dimensions 0.7 Status Name Date Original Junko Yanagitani
General Specifications
General Specifications Electrical Capacity (Resistive Load) Power Level (silver): @ V C or @ 0V C Logic Level (gold): 0.4V maximum @ 8V C/DC maximum (pplicable Range 0.m ~ 0. @ 0mV ~ 8V) Logic/Power Level:
2M Series Selection Table. 2M801, 2M803, 2M804 and 2M805
M Series Selection Table M0, M0, M0 and M0 SERIES M0 M0 M0 M0 PAGES Page -0 Pages - Pages - Pages -0 TYPE Dual-Start ACME Thread Bayonet Push-Pull Tri-Start ACME Thread DESCRIPTION More rugged keys and
M16 M20 M25 M207 M51 M100 M200
Metal Film Fixed Resistor Specifications Per IEC 60115-1 MIL-R-10509 d L H D Features Conformal multi-layer coating Color code per MIL & EIA standards Special tin-plated electrolytic copper lead wire Products
KPC-3/898 KPTC C O N N E C T O R S
KPC-3/898 KPTC C O N N E C T O R S Introduction The miniature circular connectors series KPTC from ITT Cannon are especially used in the machine and in the automotive industries. They are designed for
Mar11 Rev B
Product Specification 108-1543 11Mar11 Rev B Header, MATE-N-LOK*, Mini-Universal 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for MATE-N-LOK* mini-universal
8STA/8TA SERIES. Compact Circular Connectors. Derived from MIL-DTL & JN1003
8TA/8TA ERIE Compact Circular Connectors Derived from MIL-DTL-38999 & JN1003 8TA/8TA eries Presentation OURIAU is a recognized worldwide market leader in the design and manufacture of connectors and interconnect
Will accommodate up to 35 conductors while maintaining separation required to withstand instrumentation voltages
H.0 Accessories Introduction Description Accessories is the product classification given by CeramTec for miscellaneous hardware that is used to connect, terminate, install, or isolate Ceramaseal products.
Active Optical Connector
Active Optical Connector BF4M Series Electrical input Optical Fiber Electrical output VCSEL Driver VCSEL PD TIA + LA Overview Hirose developed the micro "BF4MC connector" that enables optical transmission
N-Series: High-Temperature Connectors
N-Series: High-Temperature Connectors DIMENSIONS NMHT I/O Cable (Male) NMHT interconnects are used in hightemperature applications. These rugged cable connectors come with a variety of termination, hardware
DEUTSCH* DTP Series Connector System
Qualification Test Report 501-151038 11 AUG 16 Rev A DEUTSCH* DTP Series Connector System 1. INTRODUCTION 1.1. Purpose This report summarizes the results of testing performed on DEUTSCH DTP series connector
Distinctive Characteristics
Distinctive Characteristics Power and logic level capabilities available to suit varying applications. Light Duty Miniature Toggles Series E High torque bushing prevents rotation and separation from metal
8D Series. MIL-DTL Series III. Connection Technologies
MIL-DTL-38999 Series III Connection Technologies MIL-DTL-38999 Series III Contents Overview A universal product platform... 06 8D Series - Presentation... 07 Product overview... 08 A superior concept...
PEGASUS SERIES GUIDE Amphenol Pcd
GUIDE 2018 Amphenol Pcd Description: The Pegasus Series is Amphenol PCD s latest innovation in small, lightweight, rugged connectors. Designed for use in harsh environments, Pegasus builds on the successful
8D Series. MIL-DTL Series III
MIL-DTL-38999 Series III MIL-DTL-38999 Series III Contents Overview A universal product platform... 06 8D Series - Presentation... 07 Product overview... 08 A superior concept... 09 A performing MIL standard
Amphenol PT, SP, MS/PT Proprietary/MIL-C-26482, Series 1 solder type
Amphenol PT, SP, MS/PT Proprietary/MIL-C-26482, Series 1 solder type Amphenol solder contact miniature cylindrical connectors meet the most critical application needs. esign versatility combined with high
SERIES 806 MIGHTY MOUSE MIL-AERO CONNECTORS
ULTRAMINIATURE CIRCULAR SERIES 806 MIGHTY MOUSE MIL-AERO CONNECTORS Next-Generation High-Density Connector Series for Demanding Aerospace, Defense and other Harsh-Application Environments FIRST EDITION
8D SERIES. Standard Aerospace & Military Connectors. MIL-DTL Series III/EN3645
8D SERIES Standard Aerospace & Military Connectors MIL-DTL-38999 Series III/EN3645 8D Series Presentation Since the early 80 s, SOURIAU is a major supplier of 38999 Series III, the screw-coupled version
MIL-DTL series III
MIL-DTL-38999 series III and range extension MIL-DTL 38999 Series III Connectors and interconnect systems for harsh environments The company designs, manufactures and markets high performance interconnect
Extended-Frequency SMA Connectors
Extended-Frequency SM Connectors Extended-Frequency SM Connectors This brochure introduces two new series of connectors that extend SM performance beyond the MIL-PRF-39012 upper frequency limit of 18 GHz,
PERFORMANCE SPECIFICATION SHEET
INCH-POUND MIL-PRF-39012/21B 20 April 2009 SUPERSEDING MIL-PRF-39012/21B 16 November 2006 PERFORMANCE SPECIFICATION SHEET CONNECTORS, RECEPTACLE, ELECTRICAL, COAXIAL, RADIO FREQUENCY, (SERIES BNC (UNCABLED),
Mar11 Rev D
Product Specification 108-1836 11Mar11 Rev D 3 mm Micro MATE-N-LOK* Connector 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the 3 mm Micro MATE-N- LOK*
Will accommodate up to 35 conductors while maintaining separation required to withstand instrumentation voltages
H.0 ACCESSORIES Introduction Technical Reference Accessories Pressure Viewport Isolator Thermocouple Coaxial Multipin Connector Feedthrough Description Accessories is the product classification given by
Nov04 Rev B EC
Product Specification Mini-Universal MATE-N-LOK* Connector 108-1542 10Nov04 Rev B EC 0990-1499-04 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for MATE-N-LOK*