API 5CT/ISO TUBING & CASING
|
|
- Eric Cobb
- 5 years ago
- Views:
Transcription
1 AI 5CT/ISO TUBING & CASING
2 In 1984, our journey into the business of repairing valves and industrial instrumentation began. That journey has led us to represent and service well known American brands and companies. In early 2000, our experience and growing passion for the valve industry encouraged our decision to launch our own brand, Morris Valves. Starting with the highly requested Ball Valves, the brand has been based on the principal of quality and performance to match our customers needs. Our high standards of production later lead us to incorporate other models such as Gate Valve and Check Valves to our production. These additions were carefully selected to match our Standard of Quality. Our success has been driven by our belief of Tradition with Quality in everything we do. Our products are developed with that belief which drives our growth and guides the service we provide to our customers. Contacts USA Address: S.W. 129th Court Suite 104, Fl Telephone: +1(786) Address: 6803 Theall Rd Building B, Houston, Tx Telefhone: +1 (832) Cel: +1 (786) Venezuela uerto Ordaz Address: Zona Industrial los inos, Manzana 7 arcela 10, uerto Ordaz, Edo. Bolívar. Telephone: +58(286) Fax: +58(286) Vision Our vision is to be amongst the leading corporations in the supply of goods and services related to valves, their components and industrial equipment in general. We want to conquer new markets in conformity with international standards and remain committed to customer satisfaction, the welfare of our company and the sustainability our planet. Mision Our mission is to use our highly trained, highly focused, and extremely motivated staff to work with manufacturers who value quality and have the vision for new development and product applications to ensure the timely provision of goods and services related to valves, their components and industrial equipment in general. We maintain a rigorous standard of customer satisfaction, which will provide for the welfare of the company, the welfare of the countries we serve, and most importantly the sustainability of the planet. Serving the world, one project at a time
3 6803 Theall Rd Building B, Houston, Texas hone :+1 (832)
4 All tubing supplied under MORRIS VAVES brand, meet or exceed the AI requirements and testing procedures (see AI Spec. 5CT). For all plications and for critical wells, always delivery the MTC including the manufacturer s test results. For tubing used in sour wells (wells with H2S content greater than 0.05 psi partial pressure), specific sour service requirements are reviewed and applied in the manufacturing process. Tubing connectors and joints. The AI externalupsetend (EUE) tubing connection is widely used because it is a good, serviceable connection in most wells. The EUE joint has a designed joint strength in tension and pressure strength greater than that of the pipe body and, therefore, is considered a 100% joint efficient connection. For proper lubrication and sealing, the joint requires a good thread compound as outlined in AI R 5A3. [2] To improve the seal performance of AI EUE tubing in highpressure service, a grooved coupling, which accepts nonmetallic seal rings, is sometimes used in the coupling (see AI Spec. 5CT SR 13). To provide more clearance, AI special clearance EUE couplings are available. AI EUE joints come in OD sizes of to in. AI nonupset (NUE) tubing is used much less than EUE tubing. The cost of NUE is only slightly less than EUE, and the joint strength is substantially less. The coupling joint diameter of NUE is less than EUE, which offers some advantages when clearance is small. AI NUE joints are available in sizes of to in. AI integraljoint tubing is available in OD sizes of to in. AI integraljoint tubing has a 10round form with a joint strength that is less than the body minimum yield, which restricts its use. The small OD of integraljoint tubing permits its use inside larger tubing strings or in wells as unloading or vent strings. The couplings should meet all the minimum requirements outlined in AI Spec. 5CT. [1] AI Spec. 5B3 and AI R 5B14 cover threading, gauging, and thread inspection. Several proprietary (nonai) connections are available. These joints are useful when greater leak resistance or more clearance is needed than that provided by the standard AI joints Theall Rd Building B, Houston, Texas hone :+1 (832)
5 1 23/8 27/8 31/2 4 41/2 LABELS WEIGHT (Lb. / Ft) TYE END FINISH 2 WALL O.D THICKNESS IJ (in) (in) NU EU IJ H40 J55 L80 NU T & C EU T & C T&C T & C N NU NU N NU N N U NU 11 N NU NU N NU N N U NU 12 N NU NU U NU NU NU U N NU N NU N U NU N80 TYE1, Q C90d T95d N NU NU NU NU NU N NU N NU N U NU 14 N NU NU U NU NU NU U N NU N NU N U NU 15 N NU NU U NU NU NU U N NU N NU N U NU 16 NU NU NU NU NU NU NU This International Standard is applicable to the following connections in accordance with AI Spec 5B: * Short round thread casing. MARKED SYMBOL (STC) * Long round thread casing. MARKED SYMBOL (LC) * Buttress thread casing. MARKED SYMBOL (BC) * Extremeline casing. MARKED SYMBOL (XC) * Nonupset tubing. MARKED SYMBOL (NU) * External upset tubing. MARKED SYMBOL (EU) * Integral joint tubing. MARKED SYMBOL (IJ) 1. Nominal linear masses, threads and coupling (col 2,3,4) are shown for information only. 2. The densities of martensitic chromium Steels (L80 types 9Cr and 13Cr) are di erent from carton steels. 3. The masses shown are therefore not accurate for martensitic chromium steels. A mass correction factor of 0,989 may be used. 4. Nonupset tubing is available with regular couplings or special bevel couplings. External upset tubing is available with regular, speciallevel, or specialclearance couplings. 5. Grade C90 and T95 tubing shall be furnished in sizes, masses and wall thickness as listed above, or as shown on the purchase agreement Theall Rd Building B, Houston, Texas hone :+1 (832)
6 STD AI 5CT Grade J55K55 (37Mn5) N80 (36 Mn2V) L80 (13Cr) 110 (30CrMo) H40 Min Max Min Max Min Max Min Max C Mn S Si Cr Ni Cu Mo V AI 5CT TUBING Chemical and Mechanical roperties Chemical Requirements (Composition %) Yield strength Min (Ksi) 7555 < Mechanical Requirements Tensile strength Min (Ksi) > 55 > 55 >100 >100 > 95 > 95 > 125 > 125 Elongation Min (%) Mill Test Certificates: Issued in accordance with AI Specification 5CT Eighth Edition. Additional Third arty Inspection can also be performed on request. Warranty:12 MONTHS FROM DATE OF COMMISSIONING OR 18 MONTHS FROM SHIMENT DATE. acking: By Bundles Marking: er AI 5CT Hard ness Theall Rd Building B, Houston, Texas hone :+1 (832)
7 Casing. Is the major structural component of a well. Casing is needed to: * Maintain borehole stability * revent contamination of water sands * Isolate water from producing formations * Control well pressures during drilling, production, and workover operations Casing provides locations for the installation of: * Blowout preventers * Wellhead equipment * roduction packers * roduction tubing The cost of casing is a major part of the overall well cost, so selection of casing size, grade, connectors, and setting depth is a primary engineering and economic consideration. Casing strings There are six basic types of casing strings: * Conductor Casing * Surface Casing * Intermediate Casing * roduction Casing * Liner * Liner tieback casing 6803 Theall Rd Building B, Houston, Texas hone :+1 (832)
8 SIZE 41/2 5 51/2 6 5/8 7 WEIGHT Lb/ft AI 5CT CASING SECIFICATIONS. WALL TYE END FINISH O. D THICKNESS GRADE (ln) (ln) H40 J55 K55 M65 L80 C95 N80 C90 T Q S S S S S S SB SLB S SLB SLB S SLB SLB SLB SLB S SLB SLB This International Standard is applicable to the following connections in accordance with AI Spec 5B: * Short round thread casing. MARKED SYMBOL (STC) * Long round thread casing. MARKED SYMBOL (LC) * Buttress thread casing. MARKED SYMBOL (BC) * Extremeline casing. MARKED SYMBOL (XC) * Nonupset tubing. MARKED SYMBOL (NU) * External upset tubing. MARKED SYMBOL (EU) * Integral joint tubing. MARKED SYMBOL (IJ) 1. Nominal linear masses, threads and coupling (col 2,3,4) are shown for information only. 2. The densities of martensitic chromium Steels (L80 types 9Cr and 13Cr) are different from carton steels. 3. The masses shown are therefore not accurate for martensitic chromium steels. A mass correction factor of 0,989 may be used. 4. Nonupset tubing is available with regular couplings or special bevel couplings. External upset tubing is available with regular, speciallevel, or specialclearance couplings. 5. Grade C90 and T95 tubing shall be furnished in sizes, masses and wall thickness as listed above, or as shown on the purchase agreement. S SB S SLB S SLB SLB S E E E E E E E E E E E E E E = LAIN ENDS S = SHORT ROUND THREAD L = LONG RND THREAD B = BUTTERS THREAD Theall Rd Building B, Houston, Texas hone :+1 (832)
9 SIZE 7 5/8 7 3/4 8 5/8 9 5/8 10 3/4 11 3/4 13 3/ /8 20 WEIGHT Lb/ft AI 5CT CASING SECIFICATIONS. WALL TYE END FINISH O. D THICKNESS GRADE (ln) (ln) H40 J55 K55 M65 L80 C95 N80 C90 T Q S S S S S H40 S S S S S SLB S SLB SLB SLB SLB J55 K55 SB SB SB SB SB SB SB SB SB SLB S S SLB SLB SLB SLB M65 SB SB SB SB SB SB SB SB SB SB L80C95 SB SB SB SB SB N80 SB SB SB SB SB C90T95 SB SB SB SB SB SB SB SLB 110 SB SB SB SB SB SB SB Q125 SB SB SB SB S SB SB SB SB 1 S SB SB SL SLB SLB SLB SLB SLB = LAIN ENDS S = SHORT ROUND THREAD L = LONG RND THREAD B = BUTTERS THREAD This International Standard is applicable to the following connections in accordance with AI Spec 5B: * Short round thread casing. MARKED SYMBOL (STC) * Long round thread casing. MARKED SYMBOL (LTC) * Buttress thread casing. MARKED SYMBOL (BTC) * Extremeline casing. MARKED SYMBOL (XC) 6803 Theall Rd Building B, Houston, Texas hone :+1 (832)
10 A Tradition of Quality Our passion is to develop solutions for difficult situations in Industrial Applications, no matter how large or small the project. Serving the world, one project at a time
API 5DP DRILL PIPE & API 7-1 HW DRILL PIPE
API DP DRILL PIPE & API -1 HW DRILL PIPE In 18, our journey into the business of repairing valves and industrial instrumentation began. That journey has led us to represent and service well known American
More informationSTAINLESS STEEL PIPE/TUBE & PIPE FITTINGS
STAINLESS STEEL PIPE/TUBE & PIPE FITTINGS In 1984, our journey into the business of repairing valves and industrial instrumentation began. That journey has led us to represent and service well known American
More informationAPI 5L LSAW,DSAW PIPE
API 5L LSAW,DSAW PIPE In 1984, our journey into the business of repairing valves and industrial instrumentation began. That journey has led us to represent and service well known American brands and companies.
More informationOCTG & Accessories. thickness
Tubing: OCTG & Accessories The tubing, are special pipes developed for oil (gas, water) wells and fields, is used to export and transmit the oil (gas, water) from such oil (gas, water) wells to the outside.
More informationUSS-LIBERTY TC. Proprietary TightFit TM. Thread Casing Connection
USS-LIBERTY TC Proprietary TightFit TM Thread Casing Connection USS-LIBERTY TC Proprietary TightFit TM Thread Casing Connection Hooked TightFit TM thread form Unique metal-to-metal seal Robust internal
More informationExceptional Strength Properties
PREMIUM UPSET TUBING With a continued focus on customer satisfaction through innovative products and services, RDT Inc. is proud to announce the introduction of our newest product line, Premium Upset Tubing.
More informationMETALLIC MATERIAL SPECIFICATION
1. Scope: Page: 1 of 5 1.1. This specification shall be utilized in procurement of AISI 8630 modified steel (UNS G86300) in quenched and tempered condition to 22 HRc maximum hardness. 1.2. These materials
More informationTest Summary Resonant Fatigue Testing 7 OD, ppf, P-110 GB CD
Page 1 of 5 Introduction This report summarizes a Resonant Fatigue Test performed on 7 OD, 26.00 ppf, P-110 Casing finished with GB CD (Casing Drilling) Connections. The test was performed to determine
More informationWhat is the difference between the material specifications for A106 Grade B Seamless pipe and A53 Grade B (Type S) seamless pipe?
WHITEPAPER WHITEPAPER: Seamless A106B & A106C vs Seamless A53B What is the difference between the material specifications for A106 Grade B Seamless pipe and A53 Grade B (Type S) seamless pipe? We are sometimes
More informationSucker Rods & Couplings
Sucker Rods & Couplings About Us Q2 Artificial Lift Services opened in December 2016 in Red Deer, Alberta, Canada. Our Senior Management team has an average of 20+ years working in the oilfield business.
More informationTAM International, Inc.
TAM International, Inc. ES-7.3-05 Specifications for Chemical and Physical Properties of Metals Used in TAM Products Approved by Department Manager Signature/Date: Mark Wyatt 04/08/2015 Reviewed by Sr.
More informationINTRODUCTION. Research and Development activities are continuous phenomena at OCTL aimed at upgradation of technology and manufacturing processes.
INTRODUCTION Oil Country Tubular Limited (OCTL), is one of the leading companies in the World processing a wide range of Oil Country Tubular Goods required for the Oil Drilling and Exploration Industry.
More informationSPCIFICATION FOR STANDARD SIZS N 15 : 2 + A1 : 27 FOR BLACK AND HOT DIPPD GALVANIZD STL PIPS Tube T Y P - L T Y P - L1 T Y Size OD (Specified) Wall Thickness (mm) Weight of Tube (Kg./Mtr) Pressure Inch
More informationSOUTHERN PIPE. Fire Sprinkler Pipe. Pre-painted. Reliability & Quality
SOUTHERN PIPE Pre-painted Fire Sprinkler Pipe Reliability & Quality At the forefront of the Steel Industry Head Office (Butterworth Plant) A member of the Southern Steel Group of companies, a leading steel
More informationStandard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service
SA-268/SA-268M ASME BPVC.II.A-2015 Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service 1. Scope 1.1 This specification covers a number of
More informationINDRAPRASTHA GAS LIMITED. (IGL) CITY GAS DISTRIBUTION PROJECT IN NCT OF DELHI & NCR
(2 to 18 SIZE) INDRAPRASTHA GAS LIMITED. (IGL) CITY GAS DISTRIBUTION PROJECT IN NCT OF DELHI & NCR PARTICULAR TECHNICAL SPECIFICATION T PIPELINE VALVES (2 to 18 SIZE) A 06.12.2016 Issued as Standard Specification
More informationStandard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service 1
Designation: A 268/A 268M 0 An American National Standard Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service This standard is issued under
More information(IN ACCORDANCE WITH ISO 10474/EN10204/DIN50049 "type 3.1") SHIPPERS NO. VEHICLE I.D SPECIFICATION AND GRADE O.D.: WALL: MIN: MAX:
UNITED STATES STEEL TUBULAR S TIME: 09:22:14 CERTIFIED REPORT SHIPPERS NO. VEHICLE I.D SPECIFICATION AND GRADE PIPE CARBON SMLS STD PIPE API 5L-*44TH ED DTD OCT 2007 AND ISO 3183:2007 MOD PSL-2 GRADE B
More information- Stainless Steel. - Titanium. Your Partner for
- Alloy steel - Stainless Steel - Nickel and Nickel Alloys - Titanium Your Partner for Piping Systems TPS-Technitube Röhrenwerke GmbH a privat owned company with head office, production and stock in Daun
More informationOil Country Tubular Ltd. INDIA. ISO 9001 : 2015 Company
Oil Country Tubular Ltd. INDIA ISO 9001 : 2015 Company m Oil Country Tubular Ltd. ISO 9001 :2015 Company Manufacturer/ Processor of Oil Country Tubular Goods Drill Pipes/ Heavy Weight Drill Pipes/ Drill
More informationNORRIS. Drive Rods. Engineered performance. Designed tough.
NORRIS Drive Rods Engineered performance. Designed tough. 1 (25,4 mm) Norris Drive Rods with 7/8 (22,23 mm) fullsize couplings Tubing size Improvement 27/8 (73,0 mm) 37% improvement in flow area when compared
More informationSpecification for Casing and Tubing
Specification for Casing and Tubing AI SECIFICATION 5CT NINTH EDITION, JULY 2011 EFFECTIVE DATE: JANUARY 1, 2012 Copyright American etroleum Institute rovided by IHS under license with AI Licensee=B International/5928366101
More informationSPECIFICATION FOR STAINLESS STEEL BARS AND SHAPES
SPECIFICATION FOR STAINLESS STEEL BARS AND SHAPES A02 (Identical with ASTM Specification A 276-97.) 1. Scope 1.1 This specification covers hot-finished or coldfinished bars except bars for reforging (Note
More informationWESTBROOK MANUFACTURING SEAMLESS PIPE NIPPLES
SEAMLESS PIPE NIPPLES LIST PRICES SEAMLESS - STANDARD BLACK SHEET No. 625 (Effective June 18, 2018) PIPE CLOSE SIZE LGTH CLOSE 1 1/2" 2" 2 1/2" 3" 3 1/2" 4" 4 1/2" 5" 5 1/2" 6" 7" 8" 9" 10" 11" 12" 1/8"
More informationThe Impact of HPHT Conditions Upon Metallic Materials
The Impact of HPHT Conditions Upon Metallic Materials Stan Jones/R. Badrak Weatherford International AADE Fluids Management Group February 23, 2011 Problem Higher Pressure results in: Higher stress levels
More informationStandard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service 1
Designation: A789/A789M 17 Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service 1 This standard is issued under the fixed designation A789/A789M;
More informationASTM A420-Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
ASTM A420-Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service 1. Scope 1.1 This specification 2 covers wrought carbon steel and alloy steel fittings
More information(IN ACCORDANCE WITH ISO 10474/EN10204/DIN50049 "type 3.1") SHIPPERS NO. VEHICLE I.D SPECIFICATION AND GRADE O.D.: WALL: MIN: MAX:
UNITED STATES STEEL TUBULAR S TIME: 09:07:07 CERTIFIED REPORT VEHICLE I.D SPECIFICATION AND GRADE PIPE CARBON SMLS STD PIPE API 5L-*44TH ED DTD OCT 2007 AND ISO 3183:2007 MOD PSL-2 GRADE B AND GRADE X42
More informationStandard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service 1
Designation: A 789/A 789M 08b Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service 1 This standard is issued under the fixed designation A 789/A
More informationWorldwide Support. Field Services. 01. TenarisHydril
01. TenarisHydril 01. TenarisHydril Worldwide Support TenarisHydril premium connections are supplied and supported by Tenaris, a leading manufacturer and supplier of steel pipe and integrated tubular services
More informationOptional Drill Pipe Products
Drill Pipe At RDT we understand our customer s need for durability and performance when choosing the drill pipe that they will use. Each joint of pipe we produce goes through our intense quality assurance
More informationSTAR Downhole Tubing (Aliphatic Amine Cured Epoxy - Product Data)
STAR Downhole Tubing (Aliphatic Amine Cured Epoxy - Product Data) Product Description Pressure - Up to 4000 psi (27,6 MPa) Resin System - Aliphatic Amine Cured Epoxy Reinforcement - Premium Fiberglass
More informationBS EN Hollow bars for machining Technical delivery conditions Non alloy and alloy steels
BS EN 10294 1. Hollow bars for machining Technical delivery conditions Non alloy and alloy steels 1 Scope This part of EN 10294 specifies the technical delivery conditions for seamless steel hollow bars
More informationSPECIFICATION FOR SEAMLESS AND WELDED ZIRCONIUM AND ZIRCONIUM ALLOY PIPE
Company Website: www.metalspiping.com Your Reliable Supplier of Special Alloys! SPECIFICATION FOR SEAMLESS AND WELDED ZIRCONIUM AND ZIRCONIUM ALLOY PIPE SB-658/SB-658M (Identical with ASTM Specification
More informationAPI Ballot ID 4798 SC5 TGOCTG. Initial Ballot for Vote & Comment
API Ballot ID 4798 SC5 TGOCTG Work Item Ballot Type (Initial, Commentonly, Reballot) Standard Key 2360 Stress Relief of Cold-worked Ends Initial Ballot for Vote & Comment API 5CT (10 th Edition as basis)
More informationStandard Specification for Carbon Steel Forgings for Piping Applications 1
Addr: 29, 227 Changle Rd., Shanghai, 2000. Tel: 86-2-6470807 Designation: A 0/A 0M 0 Endorsed by Manufacturers Standardization Society of the Valve and Fittings Industry Used in USDOE-NE Standards Standard
More informationHot Rolled Flat Products
T E C H N I C A L C A T A L O G U E Hot Rolled Flat Products AHMSA s hot rolled products comply with the highest international quality standards. The company s plate and coil production processes are certified
More informationStandard Specification for Nickel-Copper Alloy (UNS N04400)* Seamless Pipe and Tube 1
Designation: B 65 05 Standard Specification for Nickel-Copper Alloy (UNS N04400)* Seamless Pipe and Tube This standard is issued under the fixed designation B 65; the number immediately following the designation
More informationSPECIFICATION Insulated Steam Injection Tubing Revision 6, dated 24 July 2011
OIL TECH SERVICES, INC. 800 Wilcrest, Suite 100 Houston, TX 77042-1359 (310)-527-2695 (713) 789-5144 E Mail: mlombard@itmreps.com Website: www.itmreps.com SPECIFICATION Insulated Steam Injection Tubing,
More informationCALVERT GROUP SEAMLESS PIPE
SEAMLESS PIPE INTRODUCTION In 1986 Calvert Group began manufacturing seamless carbon, alloy, stainless and duplex/super duplex pipe and fittings for the oil, gas, power industries and also gas/steam injection
More informationPractical Data for Metallurgists
For more information on Timken steel and other value-added services or products, contact your local Timken Alloy Steel representative. Call 1-866-284-6536 (U.S.A.), +44-1530-512680 (International), fax
More informationStandard Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube 1
Designation: B 829 04a Standard Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube This standard is issued under the fixed designation B 829; the number immediately
More informationSEAMLESS STEEL PIPE FLOW CHART
Seamless steel pipe is a long steel material with hollow section but without joint line. There are two kinds: cold-drawn and hot rolled. It is mostly used in transportation of oil, natural gas, coal gas,
More informationIndependent Testing summary
June 30, 2011 CCB License #12 Project: 042-2a Mr. David Miller MMFX Technologies Corp. 2415 Campus Drive, Suite 0 Irvine, CA 212 Dear Mr. Miller RE: Chemical, Mechanical Analysis, Tests and Measurements
More informationStandard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over) 1
Designation: A 39/A 39M 04 Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over) This standard is issued under the fixed designation A 39/A 39M; the number immediately following
More informationAPI5L 45th Edition Specification for Line Pipe Scope. Delivery Condition. Ordering Information. Typical process of manufacturing
API5L 45th Edition Specification for Line Pipe Scope Specified the manufacture of two product levels (PSL1 and PSL2) of seamless and welded steel pipe for the use of a pipeline in the transportation of
More informationSANICRO 29 FOR OCTG TUBE AND PIPE, SEAMLESS
SANICRO 29 FOR OCTG TUBE AND PIPE, SEAMLESS DATASHEET Sanicro 29 is a high-alloy austenitic stainless steel (CRA) for OCTG downhole applications in particularly corrosive conditions. The grade is characterized
More informationASTM A105/A105M-10. Standard Specification for Carbon Steel Forgings for. Piping Applications ¹
Standard Specification for Carbon Steel Forgings for Piping Applications ¹ 1. Scope :- 1.1 This specification covers forged carbon steel piping components for ambient and higher temperature service in
More informationMechanical Properties - Standard. Standard Mild Steel Studs AWS Type A
General Material Specifications Material Specifications Nelson s studs may be made of one of the following materials, as specified on individual specification sheets. Certificates of chemical analysis
More informationSTAINLESS STEEL SHEETS
STAINLESS & NICKEL ALLOY CHATHAM STEEL CORPORATION 59 STAINLESS STEEL SHEETS TYPE 04, 04L, 6, 6L No. 2B Finish Cold Rolled, Annealed *No. 2D Finish No. Finish Polished One Side No. 4 Finish Polished One
More informationChemical composition. Seamless circular steel tubes for mechanical and general engineering purposes
Seamless pipes for mechanical applications EN 102971 Seamless circular steel tubes for mechanical and general engineering purposes Chemical composition Steel grade Elements content, % C Si Mn P S Cr Mo
More informationSTAR Downhole Casing (Aliphatic Amine Cured Epoxy - Product Data)
STAR Downhole Casing (Aliphatic Amine Cured Epoxy - Product Data) Product Description Pressure - Up to 4000 psi (27,6 MPa) Resin System - Aliphatic Amine Cured Epoxy Reinforcement - Premium Fiberglass
More informationSPECIFICATION FOR PRESSURE VESSEL PLATES, CARBON STEEL, FOR MODERATE- AND LOWER-TEMPERATURE SERVICE
Technical Literature: ASME SA-516 [ASTM A516] Company Website: www.metalspiping.com SA-516/SA-516M Carbon & Low Alloy Steels From Hebei Metals Industrial Limited SPECIFICATION FOR PRESSURE VESSEL PLATES,
More informationControl Lines & Flatpacks Control Line
CONTROL LINE MANUFACTURING This range includes control lines (hydraulic tubing) designed for use in harsh environments such as those created by chemical injection or well monitoring and other applications
More informationStainless Steel Bright Bars (Cold Drawn)
Stainless Steel Bright Bars (Cold Drawn) Applications : Machined Components, Pump Shafts, Valves, Fasteners, Machine Tools, Dairy Equipments, Surgical & Medical Parts, Threaded Bars, Studs, Bolts, Pins,
More informationCasing Failure Prevention East Texas Gas Producer s Assoc. 9 March 2010
Casing Failure Prevention East Texas Gas Producer s Assoc. 9 March 2010 The Ideal Casing String For as long as needed, it will: Safely carry all applied loads, Until the next string is set and be free
More informationAPI SC5 Ballot Submission Task Group on OCTG; Task Group on Threading, Gauging, and Compounds
API SC5 Ballot Submission Task Group on OCTG; Task Group on Threading, Gauging, and Compounds Work Item Number 2388 Title of Work Item Ballot Revision Level 1 Type of Distribution [Voting and Comment,
More informationStandard Specification for Steel Castings, Ferritic and Martensitic, for Pressure- Containing Parts, Suitable for Low-Temperature Service 1
Designation: A 32/A 32M 06 Standard Specification for Castings, Ferritic and Martensitic, for Pressure- Containing Parts, Suitable for Low-Temperature Service This standard is issued under the fixed designation
More informationStandard Specification for Steel Castings, Ferritic and Martensitic, for Pressure- Containing Parts, Suitable for Low-Temperature Service 1
Designation: A 32/A 32M 06 Standard Specification for Castings, Ferritic and Martensitic, for Pressure- Containing Parts, Suitable for Low-Temperature Service This standard is issued under the fixed designation
More informationMolybdenum. Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium- Designation: A 387/A 387M 03
Designation: A 387/A 387M 03 Used in USDOE-NE Standards Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium- Molybdenum 1 This standard is issued under the fixed designation A 387/A
More informationHARD CHROME PLATED STEEL BARS AND TUBES
www.tristarsteel.ro HARD CHROME PLATED STEEL BARS AND TUBES HARD CHROME PLATED STEEL BARS AND TUBES Contents Hard Chrome Plated Steel Bars External Hard Chrome Plated Steel Tubes Hard Chrome Plated Stainless
More informationGULF TECHNICAL FACTORY
1/6/2019 ' ~ \ bulflek GULF TECHNICAL FACTORY (GulfTek) was established in 2013 with an aim to support Aramco IKTVA initiative, by experienced & qualified engineers. GulfTek has two world class facilities,
More informationSTAR Downhole Tubing/Casing (Anhydride Cured Epoxy - Product Data)
STAR Downhole Tubing/Casing (Anhydride Cured Epoxy - Product Data) Product Description Pressure - Up to 2500 psi (17,2 MPa) Resin System - Anhydride Cured Epoxy Reinforcement - Premium Fiberglass Joining
More informationASTM A335 Chrome Moly Pipe. Welcome to Sunny Steel Enterprise Ltd. By Mr. Sum Xu
ASTM A335 Chrome Moly Pipe By Mr. Sum Xu ASTM A335 Pipe (ASME S/A335, Chrome-Moly) is a seamless ferritic Alloy-Steel Pipe for high temperature service. Welcome to Sunny Steel Enterprise Ltd. Sunny Steel
More informationSPECIFICATION FOR STAINLESS STEEL BARS AND SHAPES FOR USE IN BOILERS AND OTHER PRESSURE VESSELS
2007 SECTION II, PART A SA-479/SA-479M SPECIFICATION FOR STAINLESS STEEL BARS AND SHAPES FOR USE IN BOILERS AND OTHER PRESSURE VESSELS SA-479/SA-479M (Identical with ASTM Specification A 479/A 479M-04
More informationPROJECT SUBMITTAL. Power-Stud TM. Wedge Expansion Anchor PROJECT SUBMITTAL CONTENTS APPROVALS AND LISTINGS
PROJECT SUBMITTAL Power-Stud TM Wedge Expansion Anchor Anchoring into Solid Concrete and Masonry Base Materials Anchor Diameter is the Same as the Hole Diameter Interlocking Clip Wedges Prevent Anchor
More informationSPECIFICATION FOR CONSUMABLE INSERTS
SPECIFICATION FOR CONSUMABLE INSERTS A99 (Identical with AWS Specification A5.30-79R) Scope: This specification prescribes requirements for classification of consumable inserts. 1 Note: The values stated
More informationComposition Limits, % C Mn P S Si Cr Ni Mo Cu N
HandyTube Corporation s seamless tubing specification has been used as the basis of developing the technical requirements for this product. The products of other manufacturers shall be acceptable if the
More informationSANDVIK SPRINGFLEX SF SPRING WIRE WIRE
SANDVIK SPRINGFLEX SF SPRING WIRE WIRE DATASHEET Sandvik Springflex SF is a duplex (austenitic-ferritic) stainless steel especially designed for spring applications with extremely high fatigue requirements.
More informationANNEXURE-IA. Bid Security Amount : INR 5,00, OR USD 11, ( or equivalent Amount in any currency )
ANNEXURE-IA Tender No& Date : SDG 1982 P09 DATED 29.01.2009 Tender Fee : INR 4500.00 OR USD 100.00 Bid Security Amount : INR 5,00,000.00 OR USD 11,000.00 ( or equivalent Amount in any currency ) Bidding
More informationThink Stainless, Think Encore STAINLESS STEEL FOR SPECIALTY APPLICATIONS. Specialty Metals to Support Innovative Manufacturing
STAINLESS STEEL FOR SPECIALTY APPLICATIONS Specialty Metals to Support Innovative Manufacturing Specialty Metals to Support Innovative Manufacturing Encore Metals is a specialist supplier of high grade
More informationDevelopment of ultra-high strength seamless pipes for Perforating Guns. G. Gomez, S. Cravero, M. Bellingardi
Development of ultra-high strength seamless G. Gomez, S. Cravero, M. Bellingardi INTRODUCTION Pipe for Perforating Gun Carriers (PG) need to sustain during field operation high external hydrostatic pressures
More informationOILTOOLS AFRICA LIMITED 2013
TITAN TUBULARS BASE, FLT, OIL & GAS FREE ZONE, ONNE. Page 1 INTRODUCTION A 15,000m 2 Onne free zone tubular services facility is fully operational since 2008. Oiltools Africa Limited, Nigeria s leading
More informationFiberglass Epoxy GRE Integral Joint Tubing
Fiberglass Epoxy GRE Applications Production Wells Injection Wells Saltwater Disposal Wells Chemical Disposal Wells Water Source Wells Solution Mining Riser Mains Centron tubing is precision wound on state-of-the-art
More informationSPE DISTINGUISHED LECTURER SERIES is funded principally SPE FOUNDATION
SPE DISTINGUISHED LECTURER SERIES is funded principally through a grant of the SPE FOUNDATION The Society gratefully acknowledges those companies that support the program by allowing their professionals
More informationTYPICAL APPLICATIONS
MUREMATIC S3 AWS: ER70S-3 Mild Steel MIG Wire The best value in the industry for general purpose carbon steel welding. Murematic S3 copper coated wire is an excellent choice for a broad spectrum of single
More informationChina Yangzhou plant
China Yangzhou plant TM Marcegaglia China 714,000 sqm total area 153,000 sqm first phase covered area EN norms production quality standards Precision tubes from carbon and stainless steel Beijing Yangzhou
More informationStandard Specification for Forged Carbon and Alloy Steel Flanges for Low- Temperature Service 1
Designation: A 707/A 707M 02 An American National Stardard Standard Specification for Forged Carbon and Alloy Steel Flanges for Low- Temperature Service 1 This standard is issued under the fixed designation
More informationStandard Specification for Forged Carbon and Alloy Steel Flanges for Low- Temperature Service 1
Designation: A 707/A 707M 02 (Reapproved 2007) Standard Specification for Forged Carbon and Alloy Steel Flanges for Low- Temperature Service 1 This standard is issued under the fixed designation A 707/A
More information1. All AL-6XN tubing and fittings supplied by Central States Industrial (CSI) shall be provided to the following criteria.
AL-6XN Alloy Tubing & Fitting Specification 1. All AL-6XN tubing and fittings supplied by Central States Industrial (CSI) shall be provided to the following criteria. 2. The American Society of Mechanical
More informationStandard Specification for Structural Steel for Ships 1
Designation: Standard Specification for Structural Steel for Ships 1 This standard is issued under the fixed designation A 131/A 131M; the number immediately following the designation indicates the year
More informationMODEL SPECIFICATIONS: Hydraulically Driven Steel Underpinning Pile Specifications
MODEL SPECIFICATIONS: Hydraulically Driven Steel Underpinning Pile Specifications Mar/2008 v1.0 SECTION 02255 HYDRAULICLY DRIVEN STEEL UNDERPINNING PILES PART 1 GENERAL 1.01 SCOPE OF WORK The work shall
More informationCNBM GROUP CNBM International Corporation
SEAMLESS STEEL PIPE CONTENTS ABOUTS US -------------------------------------------------- 2 OUR ADVANTAGE ------------------------------------------ 3 CNBM SEAMLESS STEEL PIPE PRODUCTS SERIES --- 4 PRODUCTS
More informationStandard Specification for Welded and Seamless Steel Pipe Piles 1
Designation: A 252 98 e1 An American National Standard Standard Specification for Welded and Seamless Steel Pipe Piles 1 This standard is issued under the fixed designation A 252; the number immediately
More informationXI'AN LINKUN STEEL PIPE CO., LTD
Designation: A 50 0 (Reapproved 2005) Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing This standard is issued under the fixed designation A 50; the number immediately
More informationStandard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Bar and Wire 1
Designation: B 473 96 (Reapproved 2002) e Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Bar and Wire This standard is issued under the fixed designation B 473; the number
More informationRELIABLE PIPES & TUBES LTD.
RELIABLE PIPES & TUBES LTD. OHSAS 18001:2007 CERTIFIED ISO 9001:2008 CERTIFIED ISO 14001:2004 CERTIFIED PED CERT NO 01 202 IND/Q-11-0033 GOVT. RECOGNIZED EXPORT HOUSE Manufacturer & Exporters of Monel,
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 10407-2 First edition 2008-10-15 Petroleum and natural gas industries Rotary drilling equipment Part 2: Inspection and classification of used drill stem elements Industries du
More informationILJIN Steel Corporation
Stainless Steel Tube & Pipe ILJIN Steel Corporation Your Best Partner Contents Company Overview Manufacturing Process Mechanical (Metric) Tube Gas Spring Heat Exchanger Tube Duplex Stainless Steel Tube
More informationInsulating Cellular Concrete Steel Joists Painting. A. America Society for Testing and Materials (ASTM):
SECTION 05120 STRUCTURAL STEEL PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 03342 - Insulating Cellular Concrete. 2. 05210 - Steel Joists. 3. 09900 - Painting. 1.02 REFERENCES A. America Society
More informationDIN WELDED CIRCULAR UNALLOYED STEEL TUBES NOT SUBJECT TO SPECIAL REQUIREMENT
DIN 1615-84 WELDED CIRCULAR UNALLOYED STEEL TUBES NOT SUBJECT TO SPECIAL REQUIREMENT The sub clauses marked with a single dot give specifications which are to be agreed upon at the time of ordering. The
More informationPERFORATOR Oil and Gasfield Drill Pipes
PERFORATOR Oil and Gasfield Drill Pipes API approved Upsetted pipe in grade E, X, G + S Tool joint material acc. API 5DP Dimensions up to 5 1/2 pipe Hard banding acc. to ARNCO 100 XT, 150 XT, 300 XT Tuboscope
More informationSteel Pipe & Tube Products Catalog
2013 Steel Pipe & Tube Products Catalog Preface Tianjin Pipe (Group) Corporation (TPCO), located in Tianjin, a dynamic fast growing industrial city in North China, specializes in the production of seamless
More informationSPECIAL SPECIFICATION 4492 Tie Back Anchors
2004 Specifications CSJ 0504-02-022 SPECI SPECIFICATION 4492 Tie Back Anchors 1. Description. This Item shall govern for the installation of tie-back anchors in place, with grouting as required in accordance
More informationSandvik SAF 2205 (Billets)
Datasheet updated 2013 11 28 14:13:21 (supersedes all previous editions) Sandvik SAF 2205 (Billets) Sandvik SAF 2205 is a duplex (austenitic ferritic) stainless steel characterized by: High resistance
More informationStainless Steel 310/310S (UNS S31000/ UNS S31008)
Stainless Steel 310/310S (UNS S31000/ UNS S31008) Austenitic Stainless Steel 310/310S offers excellent resistance to oxidation up to 2000oF. It is a low grade steel that prevents embrittlement and sensitization.
More informationStructural Channels A-36:20-40 LG. Standard Beams
Floor Plates #/Sq. Ft. 14 Ga. 3.75 12 Ga. 5.25 1/8 6.16 3/16 8.71 1/4 11.26 5/16 13.81 3/8 16.37 Plates #/Sq. Ft. 3/16 7.66 1/4 10.21 5/16 12.76 3/8 15.32 7/16 17.87 1/2 20.42 9/16 22.97 5/8 25.52 3/4
More informationSpecification for Pipe Fittings
Specification for Pipe Fittings Specification for Pipe Fittings Page 1 of 11 Table of Contents 1.0 SCOPE...3 2.0 DEFINITIONS...3 3.0 REFERENCES, CODES AND STANDARDS...3 4.0 CONTRACTOR'S RESPONSIBILITIES...4
More informationF.W. WEBB COMPANY. Pipe Specification A106. Specification A106 NPS 1/ ANSI Schedules to 160
Pipe Specification A106 Specification A106 NPS 1/8 -- 48 ANSI Schedules to 160 Kinds of Steel Permitted For For Pipe Material Scope Covers SEAMLESS carbon steel nominal wall pipe for high-temperature service,
More information