Deep Pot. Applications: O Fixing jigs O Sensor and switch devices O High temperature gripping. Dimensions in mm. Part No.
|
|
- Annis Lawrence
- 5 years ago
- Views:
Transcription
1 Deep Pot O Material: cast Alnico 5, brass ring, mild steel pot O Supplied with Zinc plated keeper on poles O Red painted and ground on poles O With threated hole O Working Temperature up to 450 O Fixing jigs O Sensor and switch devices O High temperature gripping Ø A M B DP M3 15,1 1 DP M4 15,9 2 DP M6 16 2,65 DP M DP M6 25 6,1 DP M DP M
2 Button Magnets O Material: cast Alnico 5 O Two poles horseshoe oriented O Red painted and ground on poles O Working Temperature up to 450 O Fixing jigs O Sensor and switch devices O High temperature gripping Ø D Ø C H BT-12 12,5 4,5 4 0,7 BT-20 19,1 4,8 5,5 1,9 BT-25 25,4 4,8 5,5 3,4 BT-32 31,8 7,1 8 4,8 BT-22 22,2 4,8 6,4 3
3 Shallow Pot O Material: cast Alnico 5 O Supplied with Zinc plated keeper on poles O Red painted and ground on poles O With fixing hole O Working Temperature up to 450 O Fixing jigs O Sensors and reeds, switches O High temperature gripping Ø A B SP-20 19,1 7,75 3 SP-3 28,6 8,7 5 SP-40 38,1 10,6 13
4 Cylindrical Bar O Material: cast Alnico 5 O Supplied with Zinc plated keeper on poles O Red painted and ground on poles O Axially orientated O Working Temperature up to 450 O Security components, instrumentation O Sensors and reeds, switches O Educational & scientific applications A B CB CB CB CB CB
5 Rectangular Bar O Material: cast Alnico 5 O Supplied with Zinc plated keeper on poles O Red painted and ground on poles O Oriented on length O North pole is marked by a dimple O Working Temperature up to 450 O Components, instrumentation O Sensors and reeds, switches O Educational & scientific applications O High temperature oil filters A B C RB RB ,5 5 RB RB ,5 5 RB-6X RB RB-1X
6 Minor & Pocked O Material: cast Alnico 5 O Two poles: N-S O Red painted and ground on poles O Working Temperature up to 450 O Fixing jigs O Demonstrational magnet O Educational & scientific applications Minor A B C D MN-01 22,2 11,1 7,9 6,4 1,3 Pocked A B C D PK-01 22,2 25,4 7,9 6,4 2,4 PK ,9 7,9 4
7 Power Horseshoe O Material: cast Alnico 5 O Two poles: N-S O Red painted and ground on poles O Working Temperature up to 450 O Fixing jigs O High temperature gripping O Educational & scientific applications O Retrieval applications L H B ØE D PR ,5 PR PR ,8 PR ,5 2x ,5 PR ,3 57,2 2x PR-80 79, ,6 2x9,5 38,5 47 PR-60 60, x6, PR-8X 79, ,
8 Neo Pot Magnets - A Style O Material: NdFeB O Supplied with Zinc plated keeper on poles O Magnet with countersunk hole O Magnets have an insulated magnetic circuit preventing flux leakage O Working Temperature up to 80 O Positioning, securing and fixing jigs and fixtures O Handling thin steel sheets O Retrieval applications ØA ØD1 ØD2 B NPM-A ,5 6,5 5 5 NPM-A ,5 8,6 7 6 NPM-A ,5 10, NPM-A ,5 10, NPM-A , NPM-A , NPM-A , ,5 68 NPM-A , NPM-A ,
9 Neo Pot Magnets - B Style O Material: NdFeB O Supplied with Zinc plated keeper on poles O Ground poles in same plane with central hole for fixing O Pot Magnets have an insulated magnetic circuit preventing flux leakage O Working Temperature up to 80 O Positioning, securing and fixing jigs and fixtures O Handling thin steel sheets O Gripping and lifting applications ØA ØD1 ØD2 B NPM-B ,5 6,5 5 4 NPM-B ,5 8,6 7 6 NPM-B , NPM-B , NPM-B , NPM-B , NPM-B , ,5 63 NPM-B , NPM-B ,
10 Neo Pot Magnets - C Style O Material: NdFeB O Supplied with Zinc plated keeper on poles O Ground poles O Magnet with screw O Pot Magnets have an insulated magnetic circuit preventing flux leakage O Working Temperature up to 80 O Positioning, securing and fixing jigs and fixtures O Handling thin steel sheets O Gripping and lifting applications ØA M C B NPM-C ,2 NPM-C ,2 NPM-C ,5 NPM-C NPM-C NPM-C NPM-C NPM-C NPM-C ,5 81
11 Neo Pot Magnets - D Style O Materiale: NdFeB O Forniti con disco di chiusura zincato O Guscio in acciaio nichelato O Inserto filettato femmina O Magneti hanno un circuito isolato che impedisce la dispersione di flusso O Temperatura di lavoro fino a 80 O Positioning, securing and fixing jigs and fixtures O Handling thin steel sheets O Gripping and lifting applications ØA M C B NPM-D , NPM-D NPM-D ,5 NPM-D NPM-D NPM-D NPM-D NPM-D NPM-D ,5 81
12 Neo Pot Magnets - E Style O Material: NdFeB O Supplied with Zinc plated keeper on poles O Steel nickel coated Shell O Hook O Pot Magnets have an insulated magnetic circuit preventing flux leakage O Working Temperature up to 80 O Gripping and lifting applications O Handling thin steel sheets O Positioning, securing and fixing jigs and fixtures ØA B NPM-E ,5 NPM-E NPM-E NPM-E NPM-E NPM-E NPM-E NPM-E NPM-E
13 Neo Gum O Material: NdFeB O Black rubber shell O Working Temperature up to 80 O Positioning, securing and fixing jigs and fixtures Neo Gum Flat Style Ø A B NGFS NGFS ,5 NGFS ,5 Neo Gum Flat - A Style Ø A B M NGIM M4x6,5 5 NGIM M6x15 8,5 NGIM ,5 M8x15 18 NGIM ,5 M8x15 42
14 Neo Gum O Material: NdFeB O Black rubber shell O Working Temperature up to 80 O Positioning, securing and fixing jigs and fixtures Neo Gum Flat Style - B Style Ø A B M NGFF M4 3,5 NGFF M5 7,5 NGFF M4 8,5 NGFF ,5 M6 18 NGFF ,5 M6 42 Neo Gum Flat - C Style Ø A B M NGIF M4 1 NGIF M4 5 NGIF M4 7,5 NGIF M4 8,5 NGIF ,5 M5 18 NGIF ,5 M8 42
15 Neo Gum Block O Material: NdFeB O Black rubber shell O Working Temperature up to 80 O Supplied with M10 fixing system O Gripping and lifting applications O Positioning, securing and fixing jigs and fixtures Dimensionss in mm L B H H1 M NGBK M10 300
16 Magnetic Tools HV-I HV-II HV-III Length Width Heigth HV-I HV-II HV-III Round steel Flat steel Minimum round steel HV-IV HV-V HV-VI Length Width Heigth Degree Magnetic froce HV-IV HV-V HV-VI
17 Magnetic Tools HV-VII HV-VIII HV-IX A B C D Work angle Magnetic froce HV-VII HV-VIII HV-IX HV-IVA A B C Work angle Magnetic froce HV-IVA / 60 / ,5
18 Magnetic Tools Ø Heigth YD ,5 YD Length Width Heigth Magnetic froce PML-A N 3 PML-A Length Width Heigth Work Magnetic froce AH-B N 0,5 AH-B Length Width Heigth Size of Magnetized Length Width ZT-C ,5 ZT-C
19 Magnetic Tools MV-7K MV-12K Length Width Heigth Magnetic froce MV-7K N 1.5 MV-12K N 3.5 ECE-100 ECE-105 Length Width Heigth V-Plane Magnetic froce Mould Plane ECE N 492N 7.5 ECE N 1274N 22 S10 S20 Length Width Heigth Magnetic froce S N 0.2 S N 0.4
Permanent Magnets. Permanent Magnets. Catalogue. Certificate Number FM 31278
Catalogue Permanent Magnets Certificate Number FM 31278 Having first started manufacturing cast metal magnets in 1914, Eclipse Magnetics remains at the forefront in supplying permanent magnets to industry.
More informationMAGNETS WDS SECTION 24 - MAGNETS to 24-3, Circular Magnets... Magnetic Door Catches to Rectangular Magnets...
SECTION 24 - MAGNETS MAGNETS Circular Magnets... 24-1 to 24-3, 24-5 Magnetic Door Catches... 24-12 24-12 to 24-13 Rectangular Magnets... 24-4 Bar Magnets... Laminated Blocks and Bars... 24-6 Button Magnets...
More informationTechnical data for holding magnets (gripper magnets)
Magnets 929 Technical data for holding magnets (gripper magnets) Structure: Gripper magnets are magnets that, due to thier structure have only one attracting surface. No magnetic force action originates
More informationNeodymium Magnet Range
Neodymium Magnet Range 1 Contents About Neodymium magnets Magnetic properties Options of magnet plating Series of magnets Neodymium pot magnets With countersunk hole With through hole With threaded stud
More informationBonded Neo Magnetization Guide
Bonded Neo Magnetization Guide 1 Presentation Outline 1. Magnetizing Systems 2. Fixture Design 3. Construction 4. Testing 5. Design Study 2 Magnetizing Systems A typical magnetizing system consists of
More informationAluminium hinges Aluminium hinges Further materials and surface finishes on demand. We will be pleased to give you advice.
Aluminium s Art.:6087 Art.:6023 Art.:6022 Art.:6848.70 Art.:158.5914 Art.:6876 Art.: 6088 Art.: 6872 Art.: 6871 Art.:158.5314 Art.:158.5414 Art.:158.5814 Art.:158.6117 Art.:158.6117 F-121 Aluminium piano
More informationIf you only want to get the best quality of magnetic products.
If you only want to get the best quality of magnetic products. 8 CATALOGUE WHY BAKKER MAGNETICS? Flexible Materials 2 Magnetic Strips 3 Office Supplies We believe in making life easier by having our magnetic
More informationVSS S U B M E R S I B L E S E W A G E P U M P S
7 2 9 8 / 2 3 HP % % 64% 7 5 HP HP 5 HP % % C u r v e P a g e V S S - 4 5 R P M M O D E L : V S S - 4 E I M P E L L E R : V S A - 4 C - 2-5 A l s o a p p l i e s t o V S S - 5 E & V S S - 6 E 7 7 65 55
More informationTRADE OF HEAVY VEHICLE MECHANIC
TRADE OF HEAVY VEHICLE MECHANIC PHASE 2 Module 2 Basic Electricity/Batteries UNIT: 1 Table of Contents 1.0 Learning Outcome... 1 1.1 Key Learning Points... 1 2.0... 2 2.1 What is... 2 2.2 Classification
More informationDimensioni Dimensions. L 1000 mm 50 x 50 x 5 mm. L 1500 mm 50 x 50 x 5 mm. L 2000 mm 50 x 50 x 5 mm. L 2500 mm 50 x 50 x 5 mm
Dispersori di terra a croce e morsetti Ground rods cross profile and clamps 313.10 L 1000 mm 50 x 50 x 5 mm 313.15 L 1500 mm 50 x 50 x 5 mm 313.0 313.5 L 000 mm 50 x 50 x 5 mm L 500 mm 50 x 50 x 5 mm Dispersore
More informationMATERIALS AND TECHNOLOGY
S56 Coimisiún na Scrúduithe Stáit State Examinations Commission JUNIOR CERTIFICATE EXAMINATION, 2006 MATERIALS AND TECHNOLOGY METALWORK - ORDINARY LEVEL 100 Marks Tuesday, 20 June, Afternoon, 00 to 30
More informationAnti Vandal Pushbutton, Single Pole. Anti Vandal Pushbutton, Single Pole
Anti Vandal Pushbutton, Single Pole S76.287 (7.3) c: Screw (Assembled).098 (2.5) Typ NEW g 54 377 SPST NO OFF (ON) Stainless Steel, Flat S76b 54 378 SPST NO OFF (ON) Stainless Steel, Curved S76c 54 378E
More informationSURFACE TEMPERATURE SENSORS
SURFACE TEMPERATURE SENSORS These sensors are thermocouples and resistance thermometers for surface temperature measurement of objects. C400 R400 Magnet sensors measurement and monitoring of objects such
More informationPhone: +49 (0) 231 / Fax: +49 (0) 231 / Spring hinges. Art.: 6164 Art.
hinges Art.: 6062 Art.: 6063 Art.: 6064 Art.: 6065 Art.: 6066 Art.: 6067 Art.: 6068 Art.: 6164 Art.: 6165 Art.: 6166 Art.: 6105 Art.: 6169 Art.: 6167 Art.: 6486 Art.: 6088 Art.: 6872 Art.: 6876 F-41 hinges
More informationIP 66 TECHNICAL DATA SHEET ART. S FOCUS
HIT-CRI 70W CLEAR G12 6600lm Rated luminaire luminous flux: 3696lm Rated input power: 84W Luminaire efficacy: 44lm/W (LOR: 56%) Magnetic trasformer 230 240V 50Hz EEI=A3, LOSSES=12.2W IP 66 PRODUCT TYPE
More informationINSULATION CLIPS FOR VERTICAL STEEL VESSELS Page 2 of 2
UHDE-STANDARD Vessels and equipment UN 2004-06 (M) INSULATION CLIPS FOR VERTICAL STEEL VESSELS Page 2 of 2 3 Clips for cold insulation rated down to -140 C All dimensions in mm Figure 2. 4 Requirements
More informationComparison of BS and BS EN for steel materials
Comparison of BS and BS EN for steel materials Appendix This table only highlights the comparison of BS and BS EN on steel materials, which are relevant to plan approval. Title of BS BS BS EN Title of
More informationEIV. Circular single deflection grille for walls. Quick facts. Quick guide EIV A I R F L O W - S O U N D L E V E L
Circular single deflection grille for walls Quick facts Can be used with multi-function commissioning box Adjustable deflectors Simple installation Cleanable Available in alternative colours upon special
More informationMAGNETIC FIXINGS APPLICATION
MAGNETIC FIXINGS APPLICATION SECURE & CHANGEABLE DISPLAYS WITH MAGNETIC HOLDING AND HANGING FIXTURES MAGNETIC FIXING APPLICATION Industries such as Retail, Automotive, Warehousing & Logistics and Signage
More informationMechanical Properties - Standard. Standard Mild Steel Studs AWS Type A
General Material Specifications Material Specifications Nelson s studs may be made of one of the following materials, as specified on individual specification sheets. Certificates of chemical analysis
More informationRARE EARTH (NEODYMIUM) MAGNETS
RARE EARTH (NEODYMIUM) MAGNETS Rare Earth (or Neodymium) Magnets are extremely powerful. They are among the strongest of all magnets, and are relatively affordable, making them very popular. They are considered
More information56-SDMS-01 REV. 01 SPECIFICATIONS FOR
56-SDMS-01 REV. 01 SPECIFICATIONS FOR 13.8KV UNIT SUBSTATIONS This specification is property of SEC and subject to change or modification without any notice CONTENTS PAGE No. 1.0 SCOPE 3 2.0 CROSS REFERENCES
More informationWire and Cable Heat-shrink Tubing Non-shrink Tubing Braided Sleeving Screening Braids Moulded Parts Terminals and Splices Wire and Cable Markers
Wire and Cable Heat-shrink Tubing Non-shrink Tubing Braided Sleeving Screening Braids Moulded Parts Terminals and Splices Wire and Cable Markers Accessories Connectors Backshells Bonding Leads Metal Braids
More informationWWW.SAMSUNGPJS.CO.KR SAMSUNG Pipe Joint System, is a manufacturing company, specialized in metal stamping, form rolling and pipe extrusion. With more than 20 years of manufactring experience, we are able
More information(G) DOORS & WINDOWS LIST OF BUREAW OF INDIAN STANDARD CODE OF PRACTICE (ISI)
(G) DOORS & WINDOWS LIST OF BUREAW OF INDIAN STANDARD CODE OF PRACTICE (ISI) 4021 : Specification for teak wood. 287 : Recommendation for maximum permissible moisture content 1141 : Specification for code
More informationALS 25 db(a) 30 db(a) 35 db(a) Size
Circular single deflection grille for walls QUICK FACTS Can be used with multi-function commissioning box Adjustable deflectors Simple installation Cleanable Standard colour White RAL 9003 -- 5 alternative
More informationMIL-DTL Series I Connectors
RUGGED Self-locking bayonet coupling system 100% scoop proof 500-mating-cycle durability Excellent shock and vibration resistance Environmentally sealed and hermetic versions available VERSATILE Available
More informationMagnetization Fixture Design and Evaluation
Magnetization Fixture Design and Evaluation 1 Overview Introduction Salient features of the magnetizing fixture design Following aspects have been discussed A. Effect of additional back iron during in-situ
More informationSECTION OVERHEAD COILING DOORS
SECTION 08334 OVERHEAD COILING DOORS This guide specification has been prepared by C.H.I. Overhead Doors to assist design professionals in the preparation of a specification section covering steel overhead
More informationProduct list PRODUCT CATEGORIES ACCEPTED AT THE EVENT
PRODUCT CATEGORIES ACCEPTED AT THE EVENT A) Producers, distributors, traders, service centres, agents, purchase groups and users of the following products: 1. Iron ores and derivatives 1.1. Magnetite 1.2.
More informationDTS-HC High-Current Connectors
ROBUST DTS-HC High-Current Connectors Signal and power contacts in same housing Up to four 150 A or one 300 A high-current contacts Threaded coupling with self-locking mechanism for anti-vibration 100%
More informationHLAG/HLBG Series. Specifications. Switch specifications. Thin parallel hand with rubber cover (bush type/bearing type) Double acting
G G B A S F J L2 L2 H2 LB2 N/ S/F Specifications Descriptions Cylinder bore size mm Actuation Working fluid Max. working pressure MPa Min. working pressure MPa Ambient temperature C Port size Operational
More informationLifting Sockets. Flat Lifting Sockets
Lifting sockets are widely used in the application of precast concrete construction, such as lifting beams, wall and floor slabs etc.. A reinforcement bar is to be inserted through the cross hole to transfer
More informationBT5 9 Give a procedure for process planning for the manufacture of a component in machine shop.
VALLIAMMAI ENGINEERING COLLEGE DEPARTMENT OF MECHANICAL ENGINEERING SEMESTER VII ME 6005 PROCESS PLANNING AND COST ESTIMATION QUESTION BANK UNIT I INTRODUCTION TO PROCESS PLANNING PART A (2 Marks) 1 Define
More informationSTEAM GENERATOR GV ETNA V/50HZ LAVOR PRO
STEAM GENERATOR GV ETNA 4000 220-240V/50HZ LAVOR PRO Content filters: validity This page is intentionally left blank. 8.451.0101 - STEAM GENERATOR GV ETNA 4000 220-240V/50HZ LAVOR PRO...4 R52110068-1 -
More information36,50 21,50. RJ45, CAT6a FEEDTHROUGH CONNECTOR GROUNDED TO OUTER SHELL DATA TRANSFER RATE TESTED TO 10 GIGABIT, CONTACT SALES OFFICE FOR TEST RESULTS
29,36 TYPICAL 26,98 TYPICAL 2,50 M28x - 6g TO SUIT H INTERFACE 4,93,250-0,P-0,3L-TS 3,25, CAT6a FEEDTHROUGH CONNECTOR GROUNDED TO OUTER SHELL DATA TRANSFER RATE TESTED TO 0 GIGABIT, CONTACT OFFICE FOR
More informationModel Instruction Manual
Model CM-8822 Coating Thickness Gauge Instruction Manual reedinstruments www com Table of Contents Features... 3 Specifications... 3 Instrument Description... 4 Operating Instructions...5-6 Measuring Procedure...
More informationGeneral requirements.
178.601 General requirements. (a) General. The test procedures prescribed in this subpart are intended to ensure that packages containing hazardous materials can withstand normal conditions of transportation
More informationFast Corrosion Screening Technique Saturation Low Frequency Eddy Current
Summary The inspection of ferromagnetic and non-ferromagnetic material components is an attractive and efficient method due to its fast screening of large areas with low surface preparations. Already qualified
More informationMINOR. Electrical submersible drainage pump. Tel Fax Hz. No: PD603-EN. Revision
o: PD63-E Revision 27.12 z MIOR 793 mm Ø 286 mm Ø1 mm Weight: 2 kg P (kw) 6 (m) 4 3 2 1 4 3 3 2 2 1 1 1 1 2 2 3 3 ISO 996/A : ormal pressure : igh pressure Insulation class (IEC 8) Rated output Max. power
More informationFIGURE 1. INSERT, SCREW THREAD.
INCH-POUND 5 May 2015 SUPERSEDING MIL-I-45932/3B 2 May 1994 DETAIL SPECIFICATION SHEET INSERT, SCREW THREAD THIN WALL, LOCKED IN, OVERSIZE REPLACER This specification is approved for use by all Departments
More informationGustafsons HV2. High Velocity Duct for Residential Properties
Gustafsons HV2 High Velocity Duct for Residential Properties Specifications I. GENERAL All round supply, return, and exhaust ductwork shall be HV2 as manufactured by Gustafson or approved equal. The duct
More information204 Rodio - LED 05A LED_Proiettori_Rodio.indd /02/16 13:18
204 Rodio - LED Rodio - LED 205 Housing: in die-cast aluminium with cooling fi ns. Diffuser: 5mm thick tempered glass, resistant to thermal shocks and impacts. Coating: powder-coated with graphite grey
More informationSTEAM GENERATOR GV KATLA V/50HZ LAVOR PRO
STEAM GENERATOR GV KATLA 220-240V/50HZ LAVOR PRO Content filters: validity This page is intentionally left blank. 8.453.0001 - STEAM GENERATOR GV KATLA 220-240V/50HZ LAVOR PRO... 4 R54090256-1 - COMPLETE
More informationSUPRA 50 - SP 510. Fe-Ni SOFT MAGNETIC ALLOYS
I. INTRODUCTION SUPRA 50 - SP 510 Fe-Ni SOFT MAGNETIC ALLOYS The Imphy Alloys range of soft magnetic alloys based on the 50% nickel composition includes the following grades : - SUPRA 50 / SUPRA 50 SP
More informationAluminum Siding - includes aluminum siding (free of insulation), downspouts, gutters, trimming, and empty wire conduit.
*The following information is only to be used as a guide. Final decision of material type will be made by qualified Berks Container Recovery employees. If you have a material that you would like to recycle
More informationAluminum Siding - includes aluminum siding (free of insulation), downspouts, gutters, trimming, and empty wire conduit.
*The following information is only to be used as a guide. Final decision of material type will be made by qualified Berks Container Recovery employees. If you have a material that you would like to recycle
More informationVALLIAMMAI ENGINEERING COLLEGE DEPARTMENT OF MECHANICAL ENGINEERING QUESTION BANK CE 6306 - STRENGTH OF MATERIALS UNIT I STRESS STRAIN DEFORMATION OF SOLIDS PART- A (2 Marks) 1. What is Hooke s Law? 2.
More informationButterfly Valves - Figure 611 & 612
F611 Wafer style resilient seated bi-directional butterfly valve in sizes 50-300mm to 1600 kpa. F612 Lugged style resilient seated bi-directional butterfly valve in sizes 50-300mm to 1600 kpa. Features
More informationt This publication is issued to provide outline information only and unless specifically agreed to the contrary by WEALD ELECTRONICS LTD. in writing, is not to form part of any order or contract or be
More informationACCESSORIES LS/520, LC/520 Heavy duty non-return valves 1/ LT1000 Block form flow regulators (uni-directional) 1/8 & 1/4
ESSORIES LT000 lock form flow regulators (uni-directional) /8 & /4 LT00 lock form flow regulators (bi-directional) /8 & /4 LT70 Quick exhaust valves /8 & /4 LS/50, L/50 Heavy duty non-return valves /4...
More informationPresa campione asettica AS1 manuale Manual Aseptic sampling valve AS1
Possibilità nella presa campione asettica con attacco vapore di sterilizzazione a valvola chiusa When the valve is closed, possibility to sterilize in the aseptic sampling valve with steam Elemento Element
More informationCast Iron. General Purpose. Valves. Value. Performance. Quality VALVES WAFER TYPE VALVES CAST IRON VALVES PRODUCT CATALOGUE
Value, Performance, Quality PRODUCT CATAOGUE Cast Iron General Purpose Valves Value Performance Quality WAFER TYPE CAST IRON DPI Trading CONFIDENCE IN VAVE TECNOOGY PROUDY IMPORTED BY www.dpitrading.co.za
More informationEC medium pressure axial fans.
EC medium pressure axial fans. The efficient system solution. The engineer s choice GreenTech EC technology in a new dimension. Thanks to these new new axial axial fans, fans, our our highly highly efficient
More informationClass 125S/200WOG Bronze Gate Valve Non-Rising Stem, Threaded Ends Testing: BS EN 12288, BS 5154, BS EN Working Pressure: PN16
Class 125S/200WOG Bronze Gate Valve Non-Rising Stem, Threaded Ends Testing: BS EN 12288, BS 5154, BS EN 12266 Working Pressure: PN16 FIG. 201 WORKING PRESSURE Working Pressure Non-Shock (psi) Saturated
More informationS. C. Electric Cooperative s Specification for a Single-Phase, Two Bushing Overhead Distribution Transformer (Revised 10/2013)
S. C. Electric Cooperative s Specification for a Single-Phase, Two Bushing Overhead Distribution Transformer (Revised 10/2013) 1.0 GENERAL 1.1 This specification covers the electrical and mechanical characteristics
More informationShort Stroke Cylinders ISO Bores from 12 to 100 mm
Standard executions Version Symbol Type with female thread with male thread magnetic with female thread magnetic with male thread BI BMI BIM BMIM Series of short stroke cylinders standard to ISO 5524 magnetic
More informationFEDERAL SPECIFICATION CHAINS AND ATTACHMENTS, CARBON AND ALLOY STEEL
INCH-POUND R R -C-7F 5 July 0 SUPE R SE DING R R -C-7E 3 December 00 FEDERAL SPECIFICATION CHAINS AND ATTACHMENTS, CARBON AND ALLOY STEEL The General Services Administration has authorized the use of this
More informationContents. The Range The Finishes Application...09
MARINE HARDWARE Contents The Range...03 The Finishes...08 Application...09 The Range HINGES The prime application of the hinge is for in cabin use; however, they can also be used for some alternative applications
More informationDivision 11 - Equipment Section 11401
PART 1 - GENERAL 1.1 GENERAL A. Division 1 General Requirements applies and becomes a part of this Section of the Specification as fully as if repeated herein. B. Items of equipment which are included
More informationPrice/1. Price/1. Price/1. 1/ 8 3/ 8 1 1/ 2 1/ 8 10g -4580K / 4 3/ 4 2 1/ 2 1/ 4 30g -4660K / / 2 3/ 8 60g -4740K 291.
2 Flute For optimum performance and maximum swarf removal when plunging, slotting and routing in most materials including brass, aluminium, non-ferrous and other soft materials. Manufactured to USCTi Standards.
More informationELECTRO STATIC DISSIPATIVE (ESD) FLOORCOVERINGS
ELECTRO STATIC DISSIPATIVE (ESD) FLOORCOVERINGS The Polyflor ESD family of vinyl floorcoverings consists of products which are designed to meet specific resistance requirements. The terminology used to
More informationDRAWING SET A M I SN L F S E
DRAWING SET A I L S M SN F E ±0.00 A B C D E 1 2 3 4 5 6 7 B B1 B B1 C C D D 1 1' 1'' 1''' 2 1 1' 1'' 1''' 2 1 1' 1'' 1''' 2 D C B1 B 1 1' 1'' 1''' 2 D C B1 B B B1 B B1 C C D D 1 1' 1'' 1''' 2 1 1'
More informationSECTION 9 Aluminum. SECTION 9: Aluminum General Information Diamond Floor Plate
Plate & Sheet Expanded Metal & Grating Structurals & Bar Shapes HR Bars & Reinforcing SECTION 9 Aluminum SECTION 9: Aluminum... 131 General Information... 132-134 Sheets... 135-137 Diamond Floor Plate...
More informationUNIT I SIMPLE STRESSES AND STRAINS, STRAIN ENERGY
SIDDHARTH GROUP OF INSTITUTIONS :: PUTTUR Siddharth Nagar, Narayanavanam Road 517583 QUESTION BANK (DESCRIPTIVE) Subject with Code: Year & Sem: II-B.Tech & I-Sem Course & Branch: B.Tech - ME Regulation:
More informationMagnetic Products. For industrial, commercial and retail applications
Magnetic s For industrial, coercial and retail applications Magnetic s For Industrial, Coercial and Retail Applications Contents The P4 5 P18 22 The world famous Eclipse branded range of magnets and pot
More informationFIGURE 1. INSERT, SCREW THREAD.
INCH-POUND 22 February 2016 SUPERSEDING 5 May 2015 DETAIL SPECIFICATION SHEET INSERT, SCREW THREAD THIN WALL, LOCKED IN, OVERSIZE REPLACER This specification is approved for use by all Departments and
More informationDistinctive Characteristics
Distinctive Characteristics Power and logic level capabilities available to suit varying applications. Light Duty Miniature Toggles Series E High torque bushing prevents rotation and separation from metal
More informationDMS-11010, Roadway Illumination Light Fixtures
Overview Effective Dates: August 2004 January 2008 (new Specification). This specification governs the materials, composition, quality, sampling, and testing of 150-, 250-, and 400-W, high pressure sodium
More informationCANARA HIGH SCHOOL C.B.S.E
CANARA HIGH SCHOOL C.B.S.E A.S.R.PAI ROAD MANGALORE VI SCIENCE WORKSHEET-1 Sorting Materials into Groups I Fill in the blanks: 1. Materials that have lustre are usually called as. 2. Three examples of
More informationUKA. Code: FTS Description: Chair with versatility and natural lines
Code: FTS 007 077 Description: Chair with versatility and natural lines LEGS Technical Profile DESCRIPTION Shell made from polypropylene (PP) with 0 % fiber glass. Anti-skid surface Shell. Wide offer of
More informationManufacturing Capabilities. Very few companies in the industry are able to provide the same extent of services under one roof
Manufacturing Capabilities Our extensive range of manufacturing processes gives us the ability to supply to many different industry sectors. By utilising our design department and the extensive knowledge
More informationMechanical Ratings. Description Plastic (800EP/ES) Metal (800EM/EB) 1/2 cycle sine wave for 11 ms and no damage at 100 G
Specifications ➊ Front of Panel (Operators) Mechanical Ratings Description Plastic (8EP/ES) Metal (8EM/EB) Vibration (assembled to panel) 1 2 Hz, 1.52 mm max./1 G max. Shock and no damage at 1 G Degree
More information7.9.6 Magnetic Poles. 85 minutes. 117 marks. Page 1 of 37
7.9.6 Magnetic Poles 85 minutes 117 marks Page 1 of 37 Q1. The diagram shows an electromagnet used in a door lock. (a) The push switch is closed and the door unlocks. Explain in detail how this happens.
More informationAccessories / Screwlocks
3401-022 Accessories / Screwlocks Product Features Male or female screwlocks Residual magnetism level - Brass parts: NMB (200 Gamma max) - Stainless Steel parts: NMB (200 Gamma max) 1 part number for 1
More informationWhen an axial load is applied to a bar, normal stresses are produced on a cross section perpendicular to the axis of the bar.
11.1 AXIAL STRAIN When an axial load is applied to a bar, normal stresses are produced on a cross section perpendicular to the axis of the bar. In addition, the bar increases in length, as shown: 11.1
More informationDimensions Mechanical and Performance Requirements. Round Spacers Hex Spacers Round Threaded Female Standoffs...
Spacers & Standoffs imensions Mechanical and Performance Requirements Round Spacers... 295 Hex Spacers... 296 Round hreaded emale Standoffs... 297 Hex hreaded emale Standoffs... 298 Hex & Round hreaded
More informationC.S.I. PRODUCT GUIDE SPECIFICATIONS
C.S.I. PRODUCT GUIDE SPECIFICATIONS Specifier Notes: This product guide specification is written according to the Construction Specifications Institute (CSI) Format, including MasterFormat (2010 Edition),
More informationFundamental Course in Mechanical Processing of Materials. Exercises
Fundamental Course in Mechanical Processing of Materials Exercises 2017 3.2 Consider a material point subject to a plane stress state represented by the following stress tensor, Determine the principal
More informationCUSTOMS TARIFF - SCHEDULE. Chapter 74 COPPER AND ARTICLES THEREOF
74 - i Chapter 74 COPPER AND ARTICLES THEREOF Note. 1. In this Chapter the following expressions have the meanings hereby assigned to them: (a) Refined copper Metal containing at least 99.85% by weight
More informationMANUFACTURING TECHNOLOGY
MANUFACTURING TECHNOLOGY UNIT II Hot & Cold Working Forging & Rolling Mechanical Working of Metals In this method no machining process is carried out, but it is used to achieve optimum mechanical properties
More informationSPECIFICATION SS-20 / 4 STEEL STRUCTURES FOR SUBSTATION AND SWITCHING STATION MATERIAL
1 JULY 2009 SPECIFICATION SS-20 / 4 STEEL STRUCTURES FOR SUBSTATION AND SWITCHING STATION MATERIAL I. SCOPE This Specification covers the technical characteristics, the manufacturing and testing of steel
More informationCountersinks. Smooth cutting, perfect chamfering - Counterbores - Cross Hole - Single Flute - Three Flute
Countersinks Countersinks Smooth cutting, perfect chamfering - Counterbores - Cross Hole - Single Flute - Three Flute smooth cutting perfect chamfering countersinks Product Code: C108 This new generation
More informationThe Keystone Series GRF is a heavy duty double flanged concentric design resilient seated butterfly valve aimed at general purpose applications.
The Keystone Series GRF is a heavy duty double flanged concentric design resilient seated butterfly valve aimed at general purpose applications. Features Double flanged body design with face-to-face dimensions,
More informationInjection Adhesive VM-PY
Cartridge VM-PY 410 Coaxial cartridge Content: 410ml Range of loading: 0,3 kn - 39,4 kn Concrete quality: C20/25 - C50/60 Masonry: Solid brick, Hollow block Description The Injection Adhesive is a polyester-resin
More informationClean Speed Controller with One-touch Fitting
Clean Speed Controller with One-touch Fitting Series -FPQ/-FPG Series -FPG Series -FPQ P N Speed controllers for clean room use V S R Q -FPQ: (electroless nickel plated) and -FPG: are now available as
More informationPortable hardness tester for measuring hardness of metals Automatic Angle Correction Function
Automatically determines the object to be measured, USE Easy to measure the Thickness of coated surface. To be used on all kind of coated surface (synthetic resin, enamel, rubber, ceramic, zinc plating)
More informationMagnetic Products. For industrial, commercial and retail applications. A world leader in magnetic technology.
Magnetic s For industrial, coercial and retail applications A world leader in magnetic technology Eclipse Magnetics is at the forefront of developments in magnetic materials and design. With nearly 100
More informationFEATURES TECHNICAL DATA. Technical data sheet SSWT - STEEL STRONG-WALL FOR TIMBER FRAME RACKING RESISTANCE
The Steel Strong-Wall is a corrugated steel panel which is designed to be fixed directly to the concrete foundations of a building, within either the external or external wall sections, via a bolted connection.
More informationTechnical data Housing material &URTHERôVERSIONSôONôREQUEST
Silencer Plastic version Sintered bronze with thread or plug connection Various construction Flat design for restricted space Stainless steel silencer Silencers are used to reduce the noise level of the
More informationDrop-in Anchor E / ES Steel, zinc plated
Drop-in Anchor for non-cracked concrete and multiple use in cracked and non-cracked concrete Drop-in Anchor E / ES Steel, zinc plated Drop-in Anchor E Range of loading:,2 kn - 28,6 kn Range of concrete
More informationDrop-in Anchor E / ES Steel, zinc plated
Drop-in Anchor for non-cracked concrete and multiple use in cracked and non-cracked concrete Drop-in Anchor E / ES Steel, zinc plated Drop-in Anchor E Range of loading:,2 kn - 28,6 kn Range of concrete
More informationMissouri S&T Bullman Showers Date: February 13, 2017 Project No SECTION PLASTIC SHOWER AND DRESSING COMPARTMENTS
SECTION 102116.19 - PLASTIC SHOWER AND DRESSING COMPARTMENTS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and
More informationQuestion Paper Code : 11410
Reg. No. : Question Paper Code : 11410 B.E./B.Tech. DEGREE EXAMINATION, APRIL/MAY 2011 Fourth Semester Mechanical Engineering ME 2254 STRENGTH OF MATERIALS (Common to Automobile Engineering and Production
More informationPrecision Lead Screws
Precision Lead Screws ov-precision_lead_screws_divider - Updated - 18-09-2017 163 Precision Lead Screws Technical Information Precision lead screws ov-precision_lead_screws_technical_info - Updated - 18-09-2017
More informationIDLERS AND CONVEYOR BELT ROLLERS
IDLERS AND CONVEYOR BELT ROLLERS TROUGHING SETS GUIDE ROLLERS THE COMPANY We have been specialists for idlers and roller bearings for over 75 years. and lexibility, we develop innovative range of industry
More informationPolishing-, Ceramic Stones & Accessories
Polishing-, Ceramic Stones & Accessories 5 a company A COMPANY Content Polishing-, Ceramic Stones & Accessories 5 Polishing-, Ceramic Stones & Accessories Polishing Stones...2 Ceramic Stones...16 Super
More informationEC medium pressure axial fans. The efficient system solution.
EC medium pressure axial fans. The efficient system solution. GreenTech EC technology in a new dimension. Thanks to the new axial fans, our highly efficient GreenTech EC technology is now available for
More information