Volvo Materials Technology Gothenburg Lab
|
|
- Allyson Thornton
- 5 years ago
- Views:
Transcription
1 Volvo Materials Technology Gothenburg Lab Group BF Metallic Materials Ulla Boman - Manager Metallic Materials Telephone: address: Ulla.Boman@volvo.com Rasha Alkaisee Telephone: address: Rasha.Alkaisee@volvo.com Residual stress measurements by XRD, Shot peening, Steel Pusher and front axles, Axle stubs, Valve springs, Drive shafts, Gears Responsibility: X-Ray Diffractometers Ingemar Bertilsson Telephone: address: Ingemar.Bertilsson@volvo.com Cast aluminum, Magnesium, (grey iron) Aluminum Pistons, Cylinder Liners Responsibility: Material Courses Johan Eriksson Telephone: address: Johan.Lar.Eriksson@volvo.com Grey iron, CGI, Nodular iron, Databases, Image analysis Cylinder- blocks and heads Jonas Höijer Telephone: address: Jonas.Hoijer@volvo.com Forged components, Heat treatment. Crankshafts, Connecting rods, Bearings.
2 Daniel Kihlbaum Telephone: address: Forged components, Precipitation hardened steels, Springs (leaf & helical), SiMo Steering arms, Axles, Valve springs, Exhaust manifolds Cutting equipment, VMT Webpage Niklas Köppen Telephone: address: Cast Aluminium, Grey Iron, Compacted Graphite Iron (CGI) and Spheroidal Graphite Iron Cylinder Heads and Blocks (passenger cars), Brackets and Coolant Cover Ducts Stereo and Light Optical Microscopes Joachim Lindkvist Telephone: address: Grey iron, CGI, Spheroidal graphite iron Cylinder blocks and heads, brackets Hardness machines (Brinell) Anton Marberg Telephone: address: Cast Aluminium Cylinder heads and blocks, Brackets, Housings, EGR-components Mikael Nordqvist Telephone: address: Welding & Brazing, Stainless Steels Weld- and Brazed Components GDOES
3 Johan Pal Telephone: address: Cast Aluminium, Copper - Fredrik Sandberg Telephone: address: Fredrik.Jt.Sandberg@volvo.com Forged Components, Steel & Heat Treatment Gears and shaft Scanning Electron Microscopy & Energy Dispersive X-ray Spectroscopy Pål Schmidt Telephone: address: Pal.Schmidt@volvo.com Grey iron, CGI, Nodular iron, Cast aluminium, Casting simulation Cylinder blocks and -heads, Housings, Brackets Non-destructive testing Henrik Svensson Telephone: address: Henrik.Svensson@consultant.volvo.com Grey iron, CGI, Spheroidal graphite iron Cylinder blocks and heads, brackets Scanning Electron Microscopy & Energy Dispersive X-ray Spectroscopy
4 Group BF Surface Technology & Testing Henrik Karlsson Acting Manager Surface Technology & Testing Telephone: address: Henrik.Karlsson.8@volvo.com Powder metallurgy, Steel and heat treatment, Surface technology Injector yokes, Valve calipers, Valves and Springs Heat treatment furnaces Maqsood Ahmad Telephone: address: Maqsood.Ahmad@volvo.com Fatigue and mechanical testing at high temperature, Low cycle fatigue, Creep, Material data for FE analysis Components working at elevated temperature such as exhaust manifold, Cylinder heads MTS hydraulic system for fatigue testing MTS hydraulic system for fatigue testing Filip Bergman Telephone: address: Filip.Bergman@volvo.com Screw joint testing, Courses in screw joint design All types of screw joints Screw joint test equipment Karin Björkeborn Telephone: address: Karin.Bjorkeborn@volvo.com Screw joint testing All types of screw joints Christer Buchwald Telephone: address: Christer.Buchwald@volvo.com Database development, PL hybrid system Common Materials Database (CMD) FileMaker server, Web server, Database hosting etc.
5 Dazheng Jing Telephone: address: Ceramic materials, Catalysis EATS components Erik Larsson Telephone: address: Sintered steels, Corrosion, Surface technology Camshafts, Valves Chemicals responsible Josefin Ratcovich Telephone: address: Surface Technology, Electrical contacts and Sensors Connectors, Sensors and Terminals Göran Wahlberg Telephone: address: Electrical contacts and electronics Typical components: Connectors, Sensors and Terminals Mattias Widmark Telephone: address: Fatigue testing and calculation, Fracture mechanics, Defect sensitivity Typical components: Engine and chassis component Macro photo room Reza Zarabi Telephone: address: Screw joint testing Screw, nut, gasket and rivet
6 Gunnar Åkerström Telephone: address: Mechanical testing method development, Strength of metallic materials, Residual stresses Crank shafts, Gears, Rocker arms, Springs Hydraulic and electromagnetic load frames, measuring systems
Volvo Materials Technology Gothenburg Lab
Volvo Materials Technology Gothenburg Lab Group BF67320 - Metallic Materials Ulla Boman - Manager Metallic Materials Telephone: +46 31 322 3364 Email address: Ulla.Boman@volvo.com Rasha Alkaisee Telephone:
More informationLesson Plan. 2 nd - Engine dimensions: Bore, stroke, dead centres, compression ratio, swept volume,
Lesson Plan Name of Faculty : Ms. SUSHMA Discipline : Automobile Engg. Semester : 4 th Subject : AUTO ENGINE-1 Lesson Plan Duration : 15 weeks ( From January,2018 to April,2018) Work Load (Lecture /Practical)
More informationThe University of New Mexico. Lecture 4. Chapter 5. zcl ME260L 06. The University of New Mexico. Austenite, Ferrite and Cementite.
Lecture 4 Chapter 5 Austenite, Ferrite and Cementite 1 Austenite, Ferrite, Martensite and Cementite Austenite FCC Structure of Fe/steel at elevated temperatures (~ >727 o C) Ferrite BCC Relatively soft
More informationCompany Presentation. Managing high value added processes March 2015
Company Presentation Managing high value added processes March 2015 1 Table of contents 01 02 03 Who we are Technologies Globalisation 04 05 06 07 Engineering Capabilities Products Sales Evolution 22 1.
More informationProduct categories NEWCAST Page 1 of 5
Page 1 of 5 1.0 1 Ferrous castings Iron, steel and malleable foundries 1.1 Material groups 1.1.1 Grey cast iron 1.1.2 Spheroidal graphite cast iron 1.1.3 Compacted graphite cast iron 1.1.4 Malleable cast
More informationINVESTIGATION OF LOW TEMPERATURE CREEP BEHAVIOUR OF PM STEELS
Powder Metallurgy Progress, Vol.14 (2014), No 2 67 INVESTIGATION OF LOW TEMPERATURE CREEP BEHAVIOUR OF PM STEELS M. Vattur Sundaram, H. Karlsson, K. B. Surreddi, E. Hryha, M. Andersson, G. Åkerström, L.
More informationResource Guide. Section 3: Ductile Iron
Resource Guide Section 3: Ductile Iron Section 3 Ductile Iron Description of Grades... 3-3 65-45-12 Ferritic... 3-4 80-55-06 Partially Pearlitic... 3-6 100-70-02 Pearlitic... 3-8 4512 HRDS Heat Resistant...
More informationStressX: XRD Solution to Residual Stress Determination in Industrial Application Field
StressX: XRD Solution to Residual Stress Determination in Industrial Application Field Alessandro Torboli X-Ray Marketing Manager GNR Analytical Instruments Group 25-26 April 2017 GIZEF - Freiberg G.N.R.
More informationD R I V I N G I N N O V A T I O N KALYANI STEELS LTD
KALYANI STEELS LTD B. N. Kalyani Group Chairman PHILOSOPHY To use our specialized skills and innovative technology to contribute to the welfare of society. It is our intention to grow along with our employees
More informationTechniques Surfaces Czech Republic s.r.o. Technology ARCOR CARBO NITRO - OXIDATION
Techniques Surfaces Czech Republic s.r.o. Technology ARCOR CARBO NITRO - OXIDATION Headquarters: V Zahradach 786/21, CZ - 180 00 Praha 8 Liben Production plant: Choteborska 575, Zdirec nad Doubravou Technology
More informationCrack Analysis Of A Gasoline Engine Crankshaft
Gazi University Journal of Science GU J Sci 23(4):487-492 (2010) www.gujs.org Crack Analysis Of A Gasoline Engine Crankshaft Ali KESKİN 1, Kadir AYDIN 2 1 Mersin University, Tarsus Technical Education
More informationEDEXCEL NATIONALS UNIT 10 - PROPETIES AND APPLICATIONS OF ENGINEERING MATERIALS ASSIGNMENT 5 - END OF MODULE ASSIGNMENT
EDEXCEL NATIONALS UNIT 10 - PROPETIES AND APPLICATIONS OF ENGINEERING MATERIALS ASSIGNMENT 5 - END OF MODULE ASSIGNMENT NAME: Date Issued Time allowed 4 weeks I agree to the assessment as contained in
More informationINDUCTION FOR CARS OVERVIEW OF APPLIED AUTOMOTIVE APPLICATIONS AXLE SHAFTS GEAR BOX ELEMENTS WHEEL BOLTS BRAKE FLUID CONVEYANCE PIPES
INDUCTION FOR CARS OVERVIEW OF APPLIED AUTOMOTIVE APPLICATIONS MOTOR DRIVE BRAKES EXHAUST SYSTEM FEED SYSTEM ACCESSORIES BODY HYDRAULIC SERVO CONTROLS SUSPENSIONS Giorgio Mazzola Massimo Mosca VALVES CRANKSHAFT
More informationFire Fighting Application
sss High Pressure Triplex Plunger Pumps For Fire Fighting Application 2016 About Us sssss About Company PressureJet Systems Pvt. Ltd. was established in 1996 in Ahmedabad, India. PressureJet (an ISO 9001:2008
More informationDISPAL The Combination of Properties
DISPAL The Combination of Properties DISPAL = low weight of Aluminum plus +...high strength (R m bis 750 MPa) +...improved fracture toughness (K IC up to max. 115 MPa m) +...high temperature strength (Rm=280
More informationATRONA Test Labs, Inc Zenith Parkway, Loves Park, IL Atif Ott Odeh Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ATRONA Test Labs, Inc. 5271 Zenith Parkway, Loves Park, IL 61111 Atif Ott Odeh Phone: 815-229-8620 TESTING Valid to: March 29, 2017 Certificate Number: AT-1119
More informationMETALLURGICAL ENGINEERING (MET ENG)
Metallurgical Engineering (MET ENG) 1 METALLURGICAL ENGINEERING (MET ENG) MET ENG 1017 Introduction To Metallurgical Engineering (LEC 1.0) Introduction to the field of metallurgical engineering with specific
More informationOPERATIONS AND COSTS OF FOUNDRY INDUSTRY. Any diagnostic study of the industry or a firm calls
CHARTER III OPERATIONS AND COSTS OF FOUNDRY INDUSTRY Any diagnostic study of the industry or a firm calls for better understanding of the product, production process and other operational details. In measuring
More information+91-8048737818 Best Forgings India Private Limited http://www.forged-components.com/ We are a trusted manufacturer, exporter and supplier of high quality Ferrous and Non Ferrous Forged Components. Products
More informationShot Peening CHAPTER 2 METAL IMPROVEMENT COMPANY RESPONSE OF METALS. A Subsidiary of Curtiss-Wright Corporation
Shot Peening A P P L I C A T I O N S METAL IMPROVEMENT COMPANY A Subsidiary of Curtiss-Wright Corporation CHAPTER 2 Copyright 2005 By Metal Improvement Company HIGH STRENGTH STEELS The residual compressive
More informationStandard Properties of Typical Brass, Bronze, & Aluminum Alloys visit us online at
Standard Properties of Typical Brass, Bronze, & Aluminum Alloys 630 East Green Street Bensenville, IL 60106 Tel: 630.766.3112 Fax: 630.766.3307 630 East Green Street Bensenville, IL 60106 Tel: 630.766.3112
More informationFundamentals p. 1 Mechanical Engineering Design in Broad Perspective p. 3 An Overview of the Subject p. 3 Safety Considerations p.
Fundamentals p. 1 Mechanical Engineering Design in Broad Perspective p. 3 An Overview of the Subject p. 3 Safety Considerations p. 5 Ecological Considerations p. 9 Societal Considerations p. 11 Overall
More informationPrinciple No. 7 Design with Adequate Safety
Principle No. 7 The need to redesign an ammonia valve line gave Henry Valve Co. of Illinois the opportunity to make the conversion from gray iron to Ductile Iron as shown. Size (thinner valve walls) and
More informationCast Iron Foundry Practices 1. The family of cast irons
MME 345, Lecture 34 Cast Iron Foundry Practices 1. The family of cast irons Ref: [1] Heine, Loper and Rosenthal. Principles of Metal Casting, Tata McGraw-Hill, 1967 [2] S H Avner. Introduction to Physical
More informationTHE GROUP ABOUT US QUALITY ACCREDITATIONS
THE GROUP The Kalyani Group is one of the leading Industrial Houses in India, having diverse business interests in Engineering Steel, Forgings, Auto Components, Non Conventional Energy & Speciality Chemicals.
More informationANSI-ASQ National Accreditation Board/ACLASS
ANSI-ASQ National Accreditation Board/ACLASS SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ATRONA Test Labs, Inc. 5271 Zenith Parkway, Loves Park, IL 61111 Atif Ott Odeh Phone: 815-229-8620 TESTING Valid
More informationThe Nanomaterials in the Industrial Process of GERDAU
The Nanomaterials in the Industrial Process of GERDAU NANOSAFETY & EHS ADVANCE Global Presence 2 Products and End Users 3 Special Steel Locations 4 Product Portfolio: SBQ 5 Shipments: Special Steel 6 Special
More informationComposite Materials. Metal matrix composites
Composite Materials Metal matrix composites Introduction The properties that make MMCs attractive are high strength and stiffness, good wear resistance, high service temperature, tailorable coefficient
More informationCoimisiún na Scrúduithe Stáit State Examinations Commission
2015. M73 Coimisiún na Scrúduithe Stáit State Examinations Commission LEAVING CERTIFICATE EXAMINATION, 2015 ENGINEERING MATERIALS AND TECHNOLOGY (Higher level 300 marks) THURSDAY, 4 JUNE MORNING, 9:30
More informationThe heat treatment necessary to produce ADI is essentially a two-stage operation:
The remarkable properties of ADI are developed by a closely controlled heat treatment operation (austempering) which develops a unique matrix structure of bainitic ferrite (6%) and retained (high carbon)
More informationFundamentals of Machine Component Design
FOURTH E D I T I O N Fundamentals of Machine Component Design ROBERT C. JUVINALL Professor of Mechanical Engineering University of Michigan KURT M. MARSHEK Professor of Mechanical Engineering University
More informationDESIGN OF MACHINE ELEMENTS UNIT-1
DESIGN OF MACHINE ELEMENTS UNIT-1 PART-1 DEPARTMENT OF MECHANICAL ENGINEERING K.L.UNIVERSITY GUNTUR DESIGN: It is essentially decision making process. If we have the problem we will find the solution.
More informationFE-simulation of sheet metal forming at Volvo Car Corporation, a successful application of simulation of manufacturing processes
FE-simulation of sheet metal forming at Volvo Car Corporation, a successful application of simulation of manufacturing processes Mats Svensson Volvo Car Corporation, Body Components Olofström, Sweden and
More informationK&T Saw Shop or
www.ktoutdoor.com 11-400043B MAC POWER-PRO 1500E 04/84 to 07/86 IPL 218542 Page 1 of 40 Air Cleaner, Muffler K&T Saw Shop 606-678-9623 or 606-561-4983 K&T Saw Shop 606-678-9623 or 606-561-4983 www.ktoutdoor.com
More informationLaser Cladding AKMELOGI. Engineering Hi-tech Machinery Remanufacturing Services Flexible Manufacturing Systems
Laser Cladding AKMELOGI Engineering Hi-tech Machinery Remanufacturing Services Flexible Manufacturing Systems Laser Cladding A welding process, which uses added material in powder or wire form to build
More informationFundamentals of Manufacturing Processes Dr. D. K. Dwivedi Department of Mechanical & Industrial Engineering Indian Institute of Technology, Roorkee
Fundamentals of Manufacturing Processes Dr. D. K. Dwivedi Department of Mechanical & Industrial Engineering Indian Institute of Technology, Roorkee Lecture 07 Applications of Manufacturing Processes Hello,
More informationSteel Haseeb Ullah Khan Jatoi Department of Chemical Engineering UET Lahore
Steel Haseeb Ullah Khan Jatoi Department of Chemical Engineering UET Lahore Recap Eutectic phase diagram Eutectic phase diagram Eutectic isotherm Invariant point Eutectic Reaction Compositions of components
More informationSandvik Hyperion Metal Cutting. Gear Cutting Applications
Sandvik Hyperion Metal Cutting Gear Cutting Applications Hob Blanks Standard Hob blanks available with 12 teeth or 15 teeth configuration. Sandvik Hyperion Benefits: Reduction in EDM wire cutting - reduces
More informationAppendix 3 JIS Steel and Related Standards 471
Appendix 3 JIS Steel and Related Standards 471 G 3314:1995 G 3315:2002 G 3316:1987 G 3317:1994 G 3318:1994 G 3320:1999 G 3321:1998 G 3322:1998 G 3350:1987 G 3351:1987 G 3352:2003 G 3353:1990 G 3429:1988
More informationFACTFILE: GCE TECHNOLOGY & DESIGN
FACTFILE: GCE TECHNOLOGY & DESIGN 1.3 METAL PART 1 Metal Part 1 Learning outcomes Students should be able to: Demonstrate knowledge of the available form of supply of metals; Understand the difference
More informationK&T Saw Shop or
www.ktoutdoor.com 11-400044B MAC POWER-PRO 2300E 04/84 to 07/86 IPL 218543 Page 1 of 40 Air Cleaner, Muffler K&T Saw Shop 606-678-9623 or 606-561-4983 K&T Saw Shop 606-678-9623 or 606-561-4983 www.ktoutdoor.com
More informationCast steel: Group of ASTM standards for steel castings and forgings
Cast steel: Group of ASTM standards for steel castings and forgings Abstract: This group of ASTM specifications covers standard properties of steel and iron castings and forgings for valves, flanges, fittings,
More informationEngineering Materials
Engineering Materials Lecture 2 MEL120: Manufacturing Practices 1 Selection of Material A particular material is selected is on the basis of following considerations 1. Properties of material 1. Properties
More informationStructure-Property Correlation [1] Structure-processing-properties-performance relation
MME 297: Lecture 04 Structure-Property Correlation [1] Structure-processing-properties-performance relation Dr. A. K. M. Bazlur Rashid Professor, Department of MME BUET, Dhaka Topics to discuss today...
More informationSiMo Ductile Iron Crystallization Process
A R C H I V E S of F O U N D R Y E N G I N E E R I N G Published quarterly as the organ of the Foundry Commission of the Polish Academy of Sciences ISSN (1897-331) Volume 17 Issue 1/217 147 152 27/1 SiMo
More informationALLIED PRODUCTS. Location: Unit-I No. F-40 & F -41 M.I.D.C., Gokul- Shirgaon, Kolhapur, Maharashtra, India. Unit- II [ Machining Division ] No- D-48,
ALLIED PRODUCTS A Foundry Unit Location: Unit-I No. F-40 & F -41 M.I.D.C., Gokul- Shirgaon, Kolhapur, Maharashtra, India. Unit- II [ Machining Division ] No- D-48, M.I.D.C., Gokul- Shirgaon, Kolhapur,
More informationMechanical and Microstructural Characterisation of P/M High-speed Steel Valve Seat Inserts
Mechanical and Microstructural Characterisation of P/M High-speed Steel Valve Seat Inserts Salgado, L.; Jesus Filho, E. S.; Jesus, E. R. B.; Ambrozio Filho, F.; Rossi, J. L. Instituto de Pesquisas Energéticas
More informationMANUFACTURING OF VALVE BRIDGE COMPONENT UTILIZING LEAN ALLOYED POWDERS AND VACUUM SINTERING
Powder Metallurgy Progress, Vol.18 (2018), No.1, p.031-039 http://dx.doi.org/10.1515/pmp-2018-0004 MANUFACTURING OF VALVE BRIDGE COMPONENT UTILIZING LEAN ALLOYED POWDERS AND VACUUM SINTERING R. Shvab,
More informationMaterials Engineering Sessions focus on the areas of properties, selection, processing and performance of materials.
Materials and Lightweighting Track Materials Engineering Sessions focus on the areas of properties, selection, processing and performance of materials. M102 Advances in Lightweight Materials This session
More informationSewer Jetting Application
High Pressure Triplex Plunger Pumps For Sewer Jetting Application 2016 About Us sssss About Company PressureJet Systems Pvt. Ltd. was established in 1996 in Ahmedabad, India. PressureJet (an ISO 9001:2008
More informationCHAPTER 14. Forging of Metals. Kalpakjian Schmid Manufacturing Engineering and Technology Prentice-Hall Page 14-1
CHAPTER 14 Forging of Metals 2001 Prentice-Hall Page 14-1 Forging (a) (b) Figure 14.1 (a) Schematic illustration of the steps involved in forging a bevel gear with a shaft. Source: Forging Industry Association.
More informationShape Memory Alloys. NASA s Hot 100 Webinar. Applications include:
Shape Memory Alloys Shape Memory Alloys (SMAs) can be deformed at low temperature and recover their original shape upon heating. Applications include: Adaptive structures Actuators Heat detection devices
More informationA novel material used in automotive industry: compacted graphite iron
Indian Institute of Technology Kharagpur From the SelectedWorks of Ajit Behera August 3, industry: compacted graphite iron Ajit Behera, Indian Institute of Technology - Kharagpur Available at: https://works.bepress.com/ajitbehera/5/
More informationResource Guide. Section 4: Ni-Resist
Resource Guide Section 4: Ni-Resist Section 4 Ni-Resist Description of Grades... 4-3 201 (Type 1) Ni-Resist... 4-4 202 (Type 2) Ni-Resist... 4-6 Stock Listings... 4-8 4-2 Ni-Resist Description of Grades
More informationD101 - JOBBER DRILLS - Silver Bullet
D101 - JOBBER DRILLS - Silver Bullet Sutton Tools Silver Bullet jobber drills are a general purpose drill bit designed for machine and hand held drilling in a wide range of ferrous & non-ferrous materials
More informationSimufact 12 th Round Table Conference Bamberg, Germany
Simufact 12 th Round Table Conference Bamberg, Germany Design Robustness & Process Capability By Simufact & 6 Sigma Dr. Kunding Wang/Principal FEA Analyst Luk USA LLC Wooster, Ohio, USA Schaeffler Group
More information204 Rodio - LED 05A LED_Proiettori_Rodio.indd /02/16 13:18
204 Rodio - LED Rodio - LED 205 Housing: in die-cast aluminium with cooling fi ns. Diffuser: 5mm thick tempered glass, resistant to thermal shocks and impacts. Coating: powder-coated with graphite grey
More informationA29/A29M-16 Standard Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought
ASTM Volume 01.05, January 2018 Steel Bars, Forgings, Bearing, Chain, Tool A29/A29M-16 Standard Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought A108-13 Standard Specification
More informationFerrous Alloys. Metal Alloys. Ferrous. Non ferrous. Grey iron. Carbon Low Alloy High Alloy. Nodular iron White iron Malleable iron Alloy cast irons
Metal Alloys Most engineering metallic materials are alloys. Metals are alloyed to enhance their properties, such as strength, hardness or corrosion resistance, and to create new properties, such as shape
More informationADVANCES in NATURAL and APPLIED SCIENCES
ADVANCES in NATURAL and APPLIED SCIENCES ISSN: 1995-0772 Published BYAENSI Publication EISSN: 1998-1090 http://www.aensiweb.com/anas 2017 June 11(8): pages 25-30 Open Access Journal Failure investigation
More informationInnovative heat treatment technologies. Field proven reliability and cutting-edge technology for every application
Innovative heat treatment technologies Field proven reliability and cutting-edge technology for every application Leading-edge heat treatment furnaces meeting international safety and quality standards
More informationTOOLMAKER SOLUTIONS Custom-Made Inserts Blanks
Non-ISO carbide insert blanks for threading, parting, grooving, drilling, reaming and milling applications TOOLMAKER SOLUTIONS Custom-Made Inserts Blanks HYPERION CUSTOM-MADE INSERT BLANKS Hyperion manufacturers
More information1-Materials Science & Materials Engineering
1-Materials Science & Materials Engineering 1-1-Structure & Properties Relationship (Materials Science or Materials Engineering) Processing Structure Properties Performance Sub Atomic Atomic Sub Atomic
More informationADI & IDI Austempered Ductile Iron and Perferritic Isothermal Ductile Iron. Industrial Vehicles components
ADI & IDI Austempered Ductile Iron and Perferritic Isothermal Ductile Iron Industrial Vehicles components ADI: Austempered Ductile Iron Austempered ductile cast irons are spheroidal graphite cast irons
More informationRapidest Prototyping: Automotive Prototype Castings with 3D Printing. Sonhar Balagopalan Key Accounts Asia Pacific
Rapidest Prototyping: Automotive Prototype Castings with 3D Printing Sonhar Balagopalan Key Accounts Asia Pacific Give your customers Good surprises! Lets find all bad surprises before start of production!!
More informationEngine Bearing materials
Engine Bearing materials By Dr. Dmitri Kopeliovich The durable operation of an engine bearing is achieved if its materials combine high strength (load capacity, wear resistance, cavitation resistance)
More informationMaterial and Process. Specification
s 146-67- 1 of 7 Document By: Title Name 1. Purpose 1.1 This document defines approved revision levels of Material and Process specifications used by Onboard Systems. This list is for supplier reference
More informationA Study on the Powder Forging of Aluminum Alloy Pistons
International Journal of the Korean Society of Precision Engineering Vol. 2, No. 4, November 2001. A Study on the Powder Forging of Aluminum Alloy Pistons Jong-Ok Park 1,Chul-WooPark 1 and Young-Ho Kim
More informationTypes of Metal Alloys
Types of Metal Alloys Metal alloys Ferrous Nonferrous Steels Cast iron 257 Uses low carbon
More informationA Case Study on Using Corrosion Analysis in Forensic Engineering. Reza Mirshams. Journal of Failure Analysis and Prevention
A Case Study on Using Corrosion Analysis in Forensic Engineering Reza Mirshams Journal of Failure Analysis and Prevention ISSN 1547-7029 Volume 17 Number 4 J Fail. Anal. and Preven. (2017) 17:642-646 DOI
More informationS.E. (Mechanical) (First Semester) EXAMINATION, 2012 METALLURGY (Mechanical and Mechanical S/W) (2008 PATTERN) Time : Three Hours Maximum Marks : 100
Total No. of Questions 12] [Total No. of Printed Pages 7 Seat No. [4162]-112 S.E. (Mechanical) (First Semester) EXAMINATION, 2012 METALLURGY (Mechanical and Mechanical S/W) (2008 PATTERN) Time : Three
More informationLecture 5. Criteria of car selections
The choice of materials for a vehicle is the first and most important factor for automotive design. There is a variety of materials that can be used in the automotive body and chassis, but the purpose
More informationPart 7: 1992 Specification for materials and workmanship Cold-formed
Steel fabrication and erection British and European Standards for steelwork 1313 BS 4604 BS 5400 BS 5950 Specification for the use of high strength friction grip bolts in structural steelwork Metric series
More informationAutomotive Powertrain Solutions. Development Manufacturing
Automotive Powertrain Solutions Development Manufacturing AssemBly 2 3 Global footprint lean manufacturing Worldwide Swedish Powertrain has a global footprint with 17 locations on 3 continents and a workforce
More informationGIFA the 13th International Foundry Trade Fair will be presenting innovative solutions for the foundry industry from 16. to 21. June 2015.
Article no. 1: GIFA 2015 Foundry industry: Focus on resource optimisation and energy efficiency Traditional past, versatile present and sound future GIFA the 13th International Foundry Trade Fair will
More informationKing Portable Brinell Hardness Tester
King Tester Corporation King Portable Brinell Hardness Tester User s Manual The Name Behind the Standard Website: www.kingtester.com Email: King@kingtester.com Phone: +1 (610) 279-6010 Address: 308 Schell
More informationEngineering Materials
Engineering Materials Learning Outcome When you complete this module you will be able to: Describe the mechanical properties of ferrous and non-ferrous engineering materials, plus the effects and purposes
More informationWhite Paper on Solid State Bonding and APCI s Linear Friction Welding Technology
White Paper on Solid State Bonding and APCI s Linear Friction Welding Technology July 2011 COMMON TYPES OF WELDING There are multiple types of welding processes used today. Among the most common are Gas
More informationOVERSHOT GATE TECHNICAL DATA SHEET
FRESNO OVERSHOT GATE TECHNICAL DATA SHEET Applications Fresno Overshot Gates effectively control upstream and downstream levels of canals. Improved flow control is achieved through the use of this fully
More informationThe objective of this document is to specify the chemicals characteristics and properties of the material Steel AISI Carbon Steel.
STEEL AISI - 2 Steel AISI 2. Carbon Steel. Carbon C.8.23 Manganese Mn.3.6 Phosphorus P -.4 Max Sulfur S -.5 Max FM-DO-CO-2 3/3/27 STEEL AISI - 862 Steel AISI 862. Carbon Steel. Carbon C.7.23 Silicon Si
More informationChapter 14 Forging of Metals
Introduction Chapter 14 Forging of Metals Alexandra Schönning, Ph.D. Mechanical Engineering University of North Florida Figures by Manufacturing Engineering and Technology Kalpakijan and Schmid What is
More informationChapter 11: Applications and Processing of Metal Alloys
Chapter 11: Applications and Processing of Metal Alloys ISSUES TO ADDRESS... How are metal alloys classified and what are their common applications? What are some of the common fabrication techniques for
More informationD20-6 & D21-6 S/n & up Volume 1 of 2
Komatsu Parts Manual D20-6 & D21-6 S/n 60001 & up Volume 1 of 2 Parts Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF KOMATSU OR IT S SUCCESSORS. KOMATSU AND IT S SUCCESSORS
More informationMetal Powder Industries Federation. Allowing Fit, Form, & Function to Drive Design
Metal Powder Industries Federation Allowing Fit, Form, & Function to Drive Design 1 Introduction PM provides the opportunity for cost effective production of complex net shape components. 2 Considerations
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18478-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 01.09.2014 to 31.01.2018 Holder of certificate: MT
More informationEnhancement in Performance of Connecting Rod Using Surface Treatment Process
International Journal of Engineering Science Invention (IJESI) ISSN (Online): 2319 6734, ISSN (Print): 2319 6726 Volume 7 Issue 5 Ver. IV May 2018 PP 65-73 Enhancement in Performance of Connecting Rod
More informationLOW HEAT INPUT WELDING ALLOYS
ASTRALOY 662 CHARACTERISTICS: An all position AC/DC electrode for high strength, crack free joining of low/medium carbon, and medium tensile steels of various compositions. Low alloy medium carbon steels,
More informationBMM3643 Manufacturing Processes Powder Metallurgy Process
BMM3643 Manufacturing Processes Powder Metallurgy Process by Dr Mas Ayu Bt Hassan Faculty of Mechanical Engineering masszee@ump.edu.my Chapter Synopsis This chapter will expose students to the sequence
More informationALUMINIUM TECHNOLOGY HIGH-PERFORMANCE ALUMINUM TECHNOLOGY
ALUMINIUM TECHNOLOGY HIGH-PERFORMANCE ALUMINUM TECHNOLOGY Lightweight Aluminum in Powder Metallurgy THE MARKET S DRIVE TOWARD LIGHTWEIGHT TECHNOLOGY TECHNOLOGY Market Drivers CO 2 emissions and fuel economy
More informationManchester 24th 2008
Magnesium Die Casting In Automotive Applications New trends and innovations Meridian Technologies Manchester 24th 2008 www.meridian-mag.com Meridian s Global Presence 2 MERIDIAN IN THE WORLD 5 manufacturing
More informationWe manufactures copper & copper based alloys mainly brass / bronzes extrusion & drawn quality rods / bars
EXTRUDED RODS INTRODUCTION` We manufactures copper & copper based alloys mainly brass / bronzes extrusion & drawn quality rods / bars in different shapes like round, hex, square, rectangular & flat. We
More informationIRON CASTING AND MACHINING FOUNDRY
IRON CASTING AND MACHINING FOUNDRY FOR SMALL TO LARGE IRON CASTING DAEHAN SPECIAL METAL www.edaehan.co.kr DAEHAN SPECIAL METAL IRON CASTING & MACHINING FOUNDRY 2 IRON CASTING & MACHINING FOUNDRY FOR SMALL
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-19221-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 11.04.2017 to 19.05.2019 Holder of certificate: DEKRA
More informationVacuum furnaces. SECO/WARWICK vacuum furnace assembly facility. Vacuum carburizing Fine Carb. Aircraft and energy industry
4 Vacuum furnaces SECO/WARWICK offers a wide variety of Vacuum furnaces and process technology for heat treatment including: Bright hardening, High-pressure gas hardening, Vacuum carburizing FineCarb,
More informationManufacturing Methods and Material Selection
Manufacturing Methods and Material Selection ENM 214 Dr. Tolga Yasa Mechanical Engineering Department MAK 208 Introduction: Design Process Product design the process of defining all of the product characteristics
More informationBULLETIN MARCH 2009 POWERRAC CYLINDER ACTUATORS TECHNICAL SPECIFICATIONS
BULLETIN 74.00-2 MARCH 2009 POWERRAC CYLINDER ACTUATORS TECHNICAL SPECIFICATIONS Materials of Construction B21 R1A & R2A B9D B9E B9G B9H B9F B15 B14 B11 B10 B12 B13 B9C B7 B9A B6 B5 B9B B8 B22 B2 B20 B19
More informationMATERIALS AND TECHNOLOGY
S56 Coimisiún na Scrúduithe Stáit State Examinations Commission JUNIOR CERTIFICATE EXAMINATION, 2006 MATERIALS AND TECHNOLOGY METALWORK - ORDINARY LEVEL 100 Marks Tuesday, 20 June, Afternoon, 00 to 30
More informationXK pallet system. System information X45 X65 X65P X85 X85P XKP X180 X300. CS Conveyor chains in catalogue section Conveyor system
XK pallet system Contents System information...253 Pallets...254 Pallet accessories/spare parts...255 RFID components...256 Pallets XKPP 200 150 A, XKPP 250 225 A...257 Pallet XKPP 300 300 A + guide discs
More informationSynthesis and Characterization of SiC Reinforced HE-30 Al Alloy Particulate MMCs
Synthesis and Characterization of SiC Reinforced HE-30 Al Alloy Particulate MMCs Pradyumna Phutane *1, VijayKumar S. Jatti **2, Ravi Sekhar **3, T.P.Singh #4 * Research Scholar, Symbiosis Institute of
More informationPowder metallurgy. R.D.Makwana, IT, NU
Powder metallurgy History 1829 Woolaston- paper published Edison-electric light-filament 1909 Coolidge tungsten worked at elevated temperature New method of fabrication-refractory metals 1 Advantages of
More information